1 # Makefile.in generated by automake 1.15 from Makefile.am.
4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 # $Id: Makefile.am,v 1.5 2009/04/09 19:25:39 msheby Exp $
19 # Copyright (c) 2007-2009 John Hurst. All rights reserved.
21 # Redistribution and use in source and binary forms, with or without
22 # modification, are permitted provided that the following conditions
24 # 1. Redistributions of source code must retain the above copyright
25 # notice, this list of conditions and the following disclaimer.
26 # 2. Redistributions in binary form must reproduce the above copyright
27 # notice, this list of conditions and the following disclaimer in the
28 # documentation and/or other materials provided with the distribution.
29 # 3. The name of the author may not be used to endorse or promote products
30 # derived from this software without specific prior written permission.
32 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
33 # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
34 # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
35 # IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
36 # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
37 # NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
38 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
39 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
40 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
41 # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
44 if test -z '$(MAKELEVEL)'; then \
46 elif test -n '$(MAKE_HOST)'; then \
48 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
54 am__make_running_with_option = \
55 case $${target_option-} in \
57 *) echo "am__make_running_with_option: internal error: invalid" \
58 "target option '$${target_option-}' specified" >&2; \
62 sane_makeflags=$$MAKEFLAGS; \
63 if $(am__is_gnu_make); then \
64 sane_makeflags=$$MFLAGS; \
69 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
70 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
76 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
78 for flg in $$sane_makeflags; do \
79 test $$skip_next = yes && { skip_next=no; continue; }; \
82 -*I) strip_trailopt 'I'; skip_next=yes;; \
83 -*I?*) strip_trailopt 'I';; \
84 -*O) strip_trailopt 'O'; skip_next=yes;; \
85 -*O?*) strip_trailopt 'O';; \
86 -*l) strip_trailopt 'l'; skip_next=yes;; \
87 -*l?*) strip_trailopt 'l';; \
88 -[dEDm]) skip_next=yes;; \
89 -[JT]) skip_next=yes;; \
92 *$$target_option*) has_opt=yes; break;; \
96 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
97 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
98 pkgdatadir = $(datadir)/@PACKAGE@
99 pkgincludedir = $(includedir)/@PACKAGE@
100 pkglibdir = $(libdir)/@PACKAGE@
101 pkglibexecdir = $(libexecdir)/@PACKAGE@
102 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
103 install_sh_DATA = $(install_sh) -c -m 644
104 install_sh_PROGRAM = $(install_sh) -c
105 install_sh_SCRIPT = $(install_sh) -c
106 INSTALL_HEADER = $(INSTALL_DATA)
107 transform = $(program_transform_name)
114 build_triplet = @build@
115 host_triplet = @host@
117 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
118 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_lib_expat.m4 \
119 $(top_srcdir)/m4/ax_lib_openssl.m4 \
120 $(top_srcdir)/m4/ax_lib_xerces.m4 \
121 $(top_srcdir)/m4/az_python.m4 $(top_srcdir)/m4/libtool.m4 \
122 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
123 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
124 $(top_srcdir)/configure.ac
125 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
127 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
128 $(am__configure_deps) $(am__DIST_COMMON)
129 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
130 configure.lineno config.status.lineno
131 mkinstalldirs = $(install_sh) -d
133 CONFIG_CLEAN_VPATH_FILES =
134 AM_V_P = $(am__v_P_@AM_V@)
135 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
138 AM_V_GEN = $(am__v_GEN_@AM_V@)
139 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
140 am__v_GEN_0 = @echo " GEN " $@;
142 AM_V_at = $(am__v_at_@AM_V@)
143 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
148 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
149 ctags-recursive dvi-recursive html-recursive info-recursive \
150 install-data-recursive install-dvi-recursive \
151 install-exec-recursive install-html-recursive \
152 install-info-recursive install-pdf-recursive \
153 install-ps-recursive install-recursive installcheck-recursive \
154 installdirs-recursive pdf-recursive ps-recursive \
155 tags-recursive uninstall-recursive
156 am__can_run_installinfo = \
157 case $$AM_UPDATE_INFO_DIR in \
159 *) (install-info --version) >/dev/null 2>&1;; \
161 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
162 distclean-recursive maintainer-clean-recursive
163 am__recursive_targets = \
164 $(RECURSIVE_TARGETS) \
165 $(RECURSIVE_CLEAN_TARGETS) \
166 $(am__extra_recursive_targets)
167 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
168 cscope distdir dist dist-all distcheck
169 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
170 # Read a list of newline-separated strings from the standard input,
171 # and print each of them once, without duplicates. Input order is
173 am__uniquify_input = $(AWK) '\
174 BEGIN { nonempty = 0; } \
175 { items[$$0] = 1; nonempty = 1; } \
176 END { if (nonempty) { for (i in items) print i; }; } \
178 # Make sure the list of sources is unique. This is necessary because,
179 # e.g., the same source file might be shared among _SOURCES variables
180 # for different programs/libraries.
181 am__define_uniq_tagged_files = \
182 list='$(am__tagged_files)'; \
183 unique=`for i in $$list; do \
184 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
185 done | $(am__uniquify_input)`
189 DIST_SUBDIRS = $(SUBDIRS)
190 am__DIST_COMMON = $(srcdir)/Makefile.in \
191 $(top_srcdir)/build-aux/compile \
192 $(top_srcdir)/build-aux/config.guess \
193 $(top_srcdir)/build-aux/config.sub \
194 $(top_srcdir)/build-aux/install-sh \
195 $(top_srcdir)/build-aux/ltmain.sh \
196 $(top_srcdir)/build-aux/missing COPYING README \
197 build-aux/compile build-aux/config.guess build-aux/config.sub \
198 build-aux/depcomp build-aux/install-sh build-aux/ltmain.sh \
200 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
201 distdir = $(PACKAGE)-$(VERSION)
202 top_distdir = $(distdir)
203 am__remove_distdir = \
204 if test -d "$(distdir)"; then \
205 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
206 && rm -rf "$(distdir)" \
207 || { sleep 5 && rm -rf "$(distdir)"; }; \
209 am__post_remove_distdir = $(am__remove_distdir)
212 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
213 sed_rest='s,^[^/]*/*,,'; \
214 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
215 sed_butlast='s,/*[^/]*$$,,'; \
216 while test -n "$$dir1"; do \
217 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
218 if test "$$first" != "."; then \
219 if test "$$first" = ".."; then \
220 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
221 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
223 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
224 if test "$$first2" = "$$first"; then \
225 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
229 dir0="$$dir0"/"$$first"; \
232 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
235 DIST_ARCHIVES = $(distdir).tar.gz
237 DIST_TARGETS = dist-gzip
238 distuninstallcheck_listfiles = find . -type f -print
239 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
240 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
241 distcleancheck_listfiles = find . -type f -print
244 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
246 AUTOCONF = @AUTOCONF@
247 AUTOHEADER = @AUTOHEADER@
248 AUTOMAKE = @AUTOMAKE@
251 CCDEPMODE = @CCDEPMODE@
254 CPPFLAGS = @CPPFLAGS@
257 CXXDEPMODE = @CXXDEPMODE@
258 CXXFLAGS = @CXXFLAGS@
259 CYGPATH_W = @CYGPATH_W@
263 DSYMUTIL = @DSYMUTIL@
270 EXPAT_CFLAGS = @EXPAT_CFLAGS@
271 EXPAT_LDFLAGS = @EXPAT_LDFLAGS@
272 EXPAT_VERSION = @EXPAT_VERSION@
276 INSTALL_DATA = @INSTALL_DATA@
277 INSTALL_PROGRAM = @INSTALL_PROGRAM@
278 INSTALL_SCRIPT = @INSTALL_SCRIPT@
279 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
287 LTLIBOBJS = @LTLIBOBJS@
288 MAKEINFO = @MAKEINFO@
289 MANIFEST_TOOL = @MANIFEST_TOOL@
295 OPENSSL_CPPFLAGS = @OPENSSL_CPPFLAGS@
296 OPENSSL_LDFLAGS = @OPENSSL_LDFLAGS@
297 OPENSSL_LIBS = @OPENSSL_LIBS@
298 OPENSSL_VERSION = @OPENSSL_VERSION@
302 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
303 PACKAGE_NAME = @PACKAGE_NAME@
304 PACKAGE_STRING = @PACKAGE_STRING@
305 PACKAGE_TARNAME = @PACKAGE_TARNAME@
306 PACKAGE_URL = @PACKAGE_URL@
307 PACKAGE_VERSION = @PACKAGE_VERSION@
308 PATH_SEPARATOR = @PATH_SEPARATOR@
310 PYTHON_CPPFLAGS = @PYTHON_CPPFLAGS@
311 PYTHON_CSPEC = @PYTHON_CSPEC@
312 PYTHON_EXECDIR = @PYTHON_EXECDIR@
313 PYTHON_EXECPREFIX = @PYTHON_EXECPREFIX@
314 PYTHON_LDFLAGS = @PYTHON_LDFLAGS@
315 PYTHON_LSPEC = @PYTHON_LSPEC@
316 PYTHON_PREFIX = @PYTHON_PREFIX@
317 PYTHON_SHORTVERSION = @PYTHON_SHORTVERSION@
320 SET_MAKE = @SET_MAKE@
324 XERCES_CPPFLAGS = @XERCES_CPPFLAGS@
325 XERCES_LDFLAGS = @XERCES_LDFLAGS@
326 XERCES_LIBS = @XERCES_LIBS@
327 XERCES_VERSION = @XERCES_VERSION@
328 abs_builddir = @abs_builddir@
329 abs_srcdir = @abs_srcdir@
330 abs_top_builddir = @abs_top_builddir@
331 abs_top_srcdir = @abs_top_srcdir@
332 ac_ct_AR = @ac_ct_AR@
333 ac_ct_CC = @ac_ct_CC@
334 ac_ct_CXX = @ac_ct_CXX@
335 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
336 am__include = @am__include@
337 am__leading_dot = @am__leading_dot@
338 am__quote = @am__quote@
340 am__untar = @am__untar@
343 build_alias = @build_alias@
344 build_cpu = @build_cpu@
345 build_os = @build_os@
346 build_vendor = @build_vendor@
347 builddir = @builddir@
349 datarootdir = @datarootdir@
352 exec_prefix = @exec_prefix@
354 host_alias = @host_alias@
355 host_cpu = @host_cpu@
357 host_vendor = @host_vendor@
359 includedir = @includedir@
361 install_sh = @install_sh@
363 libexecdir = @libexecdir@
364 localedir = @localedir@
365 localstatedir = @localstatedir@
368 oldincludedir = @oldincludedir@
371 program_transform_name = @program_transform_name@
374 sharedstatedir = @sharedstatedir@
376 sysconfdir = @sysconfdir@
377 target_alias = @target_alias@
378 top_build_prefix = @top_build_prefix@
379 top_builddir = @top_builddir@
380 top_srcdir = @top_srcdir@
382 ACLOCAL_AMFLAGS = -I m4
386 am--refresh: Makefile
388 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
390 case '$(am__configure_deps)' in \
392 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
393 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
398 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
399 $(am__cd) $(top_srcdir) && \
400 $(AUTOMAKE) --foreign Makefile
401 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
404 echo ' $(SHELL) ./config.status'; \
405 $(SHELL) ./config.status;; \
407 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
408 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
411 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
412 $(SHELL) ./config.status --recheck
414 $(top_srcdir)/configure: $(am__configure_deps)
415 $(am__cd) $(srcdir) && $(AUTOCONF)
416 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
417 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
418 $(am__aclocal_m4_deps):
427 -rm -f libtool config.lt
429 # This directory's subdirectories are mostly independent; you can cd
430 # into them and run 'make' without going through this Makefile.
431 # To change the values of 'make' variables: instead of editing Makefiles,
432 # (1) if the variable is set in 'config.status', edit 'config.status'
433 # (which will cause the Makefiles to be regenerated when you run 'make');
434 # (2) otherwise, pass the desired values on the 'make' command line.
435 $(am__recursive_targets):
437 if $(am__make_keepgoing); then \
438 failcom='fail=yes'; \
443 target=`echo $@ | sed s/-recursive//`; \
445 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
446 *) list='$(SUBDIRS)' ;; \
448 for subdir in $$list; do \
449 echo "Making $$target in $$subdir"; \
450 if test "$$subdir" = "."; then \
452 local_target="$$target-am"; \
454 local_target="$$target"; \
456 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
459 if test "$$dot_seen" = "no"; then \
460 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
463 ID: $(am__tagged_files)
464 $(am__define_uniq_tagged_files); mkid -fID $$unique
468 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
471 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
472 include_option=--etags-include; \
475 include_option=--include; \
478 list='$(SUBDIRS)'; for subdir in $$list; do \
479 if test "$$subdir" = .; then :; else \
480 test ! -f $$subdir/TAGS || \
481 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
484 $(am__define_uniq_tagged_files); \
486 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
487 test -n "$$unique" || unique=$$empty_fix; \
488 if test $$# -gt 0; then \
489 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
492 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
496 ctags: ctags-recursive
499 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
500 $(am__define_uniq_tagged_files); \
501 test -z "$(CTAGS_ARGS)$$unique" \
502 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
506 here=`$(am__cd) $(top_builddir) && pwd` \
507 && $(am__cd) $(top_srcdir) \
508 && gtags -i $(GTAGS_ARGS) "$$here"
510 test ! -s cscope.files \
511 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
514 cscope.files: clean-cscope cscopelist
515 cscopelist: cscopelist-recursive
517 cscopelist-am: $(am__tagged_files)
518 list='$(am__tagged_files)'; \
519 case "$(srcdir)" in \
520 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
521 *) sdir=$(subdir)/$(srcdir) ;; \
523 for i in $$list; do \
524 if test -f "$$i"; then \
525 echo "$(subdir)/$$i"; \
529 done >> $(top_builddir)/cscope.files
532 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
533 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
535 distdir: $(DISTFILES)
536 $(am__remove_distdir)
537 test -d "$(distdir)" || mkdir "$(distdir)"
538 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
539 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
540 list='$(DISTFILES)'; \
541 dist_files=`for file in $$list; do echo $$file; done | \
542 sed -e "s|^$$srcdirstrip/||;t" \
543 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
544 case $$dist_files in \
545 */*) $(MKDIR_P) `echo "$$dist_files" | \
546 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
549 for file in $$dist_files; do \
550 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
551 if test -d $$d/$$file; then \
552 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
553 if test -d "$(distdir)/$$file"; then \
554 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
556 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
557 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
558 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
560 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
562 test -f "$(distdir)/$$file" \
563 || cp -p $$d/$$file "$(distdir)/$$file" \
567 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
568 if test "$$subdir" = .; then :; else \
570 || test -d "$(distdir)/$$subdir" \
571 || $(MKDIR_P) "$(distdir)/$$subdir" \
573 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
575 new_distdir=$$reldir; \
576 dir1=$$subdir; dir2="$(top_distdir)"; \
578 new_top_distdir=$$reldir; \
579 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
580 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
581 ($(am__cd) $$subdir && \
582 $(MAKE) $(AM_MAKEFLAGS) \
583 top_distdir="$$new_top_distdir" \
584 distdir="$$new_distdir" \
585 am__remove_distdir=: \
586 am__skip_length_check=: \
587 am__skip_mode_fix=: \
592 -test -n "$(am__skip_mode_fix)" \
593 || find "$(distdir)" -type d ! -perm -755 \
594 -exec chmod u+rwx,go+rx {} \; -o \
595 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
596 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
597 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
598 || chmod -R a+r "$(distdir)"
600 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
601 $(am__post_remove_distdir)
604 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
605 $(am__post_remove_distdir)
608 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
609 $(am__post_remove_distdir)
612 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
613 $(am__post_remove_distdir)
616 @echo WARNING: "Support for distribution archives compressed with" \
617 "legacy program 'compress' is deprecated." >&2
618 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
619 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
620 $(am__post_remove_distdir)
623 @echo WARNING: "Support for shar distribution archives is" \
625 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
626 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
627 $(am__post_remove_distdir)
630 -rm -f $(distdir).zip
631 zip -rq $(distdir).zip $(distdir)
632 $(am__post_remove_distdir)
635 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
636 $(am__post_remove_distdir)
638 # This target untars the dist file and tries a VPATH configuration. Then
639 # it guarantees that the distribution is self-contained by making another
642 case '$(DIST_ARCHIVES)' in \
644 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
646 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
648 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
650 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
652 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
654 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
656 unzip $(distdir).zip ;;\
658 chmod -R a-w $(distdir)
660 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
662 test -d $(distdir)/_build || exit 0; \
663 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
664 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
666 && $(am__cd) $(distdir)/_build/sub \
668 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
669 $(DISTCHECK_CONFIGURE_FLAGS) \
670 --srcdir=../.. --prefix="$$dc_install_base" \
671 && $(MAKE) $(AM_MAKEFLAGS) \
672 && $(MAKE) $(AM_MAKEFLAGS) dvi \
673 && $(MAKE) $(AM_MAKEFLAGS) check \
674 && $(MAKE) $(AM_MAKEFLAGS) install \
675 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
676 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
677 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
679 && chmod -R a-w "$$dc_install_base" \
681 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
682 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
683 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
684 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
685 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
686 } || { rm -rf "$$dc_destdir"; exit 1; }) \
687 && rm -rf "$$dc_destdir" \
688 && $(MAKE) $(AM_MAKEFLAGS) dist \
689 && rm -rf $(DIST_ARCHIVES) \
690 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
693 $(am__post_remove_distdir)
694 @(echo "$(distdir) archives ready for distribution: "; \
695 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
696 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
698 @test -n '$(distuninstallcheck_dir)' || { \
699 echo 'ERROR: trying to run $@ with an empty' \
700 '$$(distuninstallcheck_dir)' >&2; \
703 $(am__cd) '$(distuninstallcheck_dir)' || { \
704 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
707 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
708 || { echo "ERROR: files left after uninstall:" ; \
709 if test -n "$(DESTDIR)"; then \
710 echo " (check DESTDIR support)"; \
712 $(distuninstallcheck_listfiles) ; \
714 distcleancheck: distclean
715 @if test '$(srcdir)' = . ; then \
716 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
719 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
720 || { echo "ERROR: files left in build directory after distclean:" ; \
721 $(distcleancheck_listfiles) ; \
724 check: check-recursive
726 installdirs: installdirs-recursive
728 install: install-recursive
729 install-exec: install-exec-recursive
730 install-data: install-data-recursive
731 uninstall: uninstall-recursive
734 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
736 installcheck: installcheck-recursive
738 if test -z '$(STRIP)'; then \
739 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
740 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
743 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
744 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
745 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
752 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
753 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
755 maintainer-clean-generic:
756 @echo "This command is intended for maintainers to use"
757 @echo "it deletes files that may require special tools to rebuild."
758 clean: clean-recursive
760 clean-am: clean-generic clean-libtool mostlyclean-am
762 distclean: distclean-recursive
763 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
765 distclean-am: clean-am distclean-generic distclean-libtool \
782 install-dvi: install-dvi-recursive
788 install-html: install-html-recursive
792 install-info: install-info-recursive
798 install-pdf: install-pdf-recursive
802 install-ps: install-ps-recursive
808 maintainer-clean: maintainer-clean-recursive
809 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
810 -rm -rf $(top_srcdir)/autom4te.cache
812 maintainer-clean-am: distclean-am maintainer-clean-generic
814 mostlyclean: mostlyclean-recursive
816 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
828 .MAKE: $(am__recursive_targets) install-am install-strip
830 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
831 am--refresh check check-am clean clean-cscope clean-generic \
832 clean-libtool cscope cscopelist-am ctags ctags-am dist \
833 dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
834 dist-xz dist-zip distcheck distclean distclean-generic \
835 distclean-libtool distclean-tags distcleancheck distdir \
836 distuninstallcheck dvi dvi-am html html-am info info-am \
837 install install-am install-data install-data-am install-dvi \
838 install-dvi-am install-exec install-exec-am install-html \
839 install-html-am install-info install-info-am install-man \
840 install-pdf install-pdf-am install-ps install-ps-am \
841 install-strip installcheck installcheck-am installdirs \
842 installdirs-am maintainer-clean maintainer-clean-generic \
843 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
844 ps ps-am tags tags-am uninstall uninstall-am
849 # Tell versions [3.59,3.63) of GNU make to not export all variables.
850 # Otherwise a system limit (for SysV at least) may be exceeded.