2 Copyright (C) 2000 Paul Davis
4 This program is free software; you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation; either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program; if not, write to the Free Software
16 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 #include "libardour-config.h"
29 #include <boost/algorithm/string.hpp>
31 #include "pbd/xml++.h"
32 #include "pbd/enumwriter.h"
33 #include "pbd/locale_guard.h"
34 #include "pbd/memento_command.h"
35 #include "pbd/stacktrace.h"
36 #include "pbd/types_convert.h"
37 #include "pbd/unwind.h"
39 #include "ardour/amp.h"
40 #include "ardour/audio_buffer.h"
41 #include "ardour/audio_track.h"
42 #include "ardour/audio_port.h"
43 #include "ardour/audioengine.h"
44 #include "ardour/boost_debug.h"
45 #include "ardour/buffer.h"
46 #include "ardour/buffer_set.h"
47 #include "ardour/capturing_processor.h"
48 #include "ardour/debug.h"
49 #include "ardour/delivery.h"
50 #include "ardour/disk_reader.h"
51 #include "ardour/disk_writer.h"
52 #include "ardour/event_type_map.h"
53 #include "ardour/gain_control.h"
54 #include "ardour/internal_return.h"
55 #include "ardour/internal_send.h"
56 #include "ardour/meter.h"
57 #include "ardour/delayline.h"
58 #include "ardour/midi_buffer.h"
59 #include "ardour/midi_port.h"
60 #include "ardour/monitor_control.h"
61 #include "ardour/monitor_processor.h"
62 #include "ardour/pannable.h"
63 #include "ardour/panner.h"
64 #include "ardour/panner_shell.h"
65 #include "ardour/parameter_descriptor.h"
66 #include "ardour/phase_control.h"
67 #include "ardour/plugin_insert.h"
68 #include "ardour/port.h"
69 #include "ardour/port_insert.h"
70 #include "ardour/processor.h"
71 #include "ardour/profile.h"
72 #include "ardour/route.h"
73 #include "ardour/route_group.h"
74 #include "ardour/send.h"
75 #include "ardour/session.h"
76 #include "ardour/solo_control.h"
77 #include "ardour/solo_isolate_control.h"
78 #include "ardour/types_convert.h"
79 #include "ardour/unknown_processor.h"
80 #include "ardour/utils.h"
81 #include "ardour/vca.h"
86 using namespace ARDOUR;
89 PBD::Signal3<int,boost::shared_ptr<Route>, boost::shared_ptr<PluginInsert>, Route::PluginSetupOptions > Route::PluginSetup;
91 /** Base class for all routable/mixable objects (tracks and busses) */
92 Route::Route (Session& sess, string name, PresentationInfo::Flag flag, DataType default_type)
93 : Stripable (sess, name, PresentationInfo (flag))
94 , GraphNode (sess._process_graph)
95 , Muteable (sess, name)
99 , _disk_io_point (DiskIOPreFader)
100 , _pending_process_reorder (0)
101 , _pending_signals (0)
102 , _pending_declick (true)
103 , _meter_point (MeterPostFader)
104 , _pending_meter_point (MeterPostFader)
105 , _meter_type (MeterPeak)
106 , _denormal_protection (false)
109 , _declickable (false)
110 , _have_internal_generator (false)
111 , _default_type (default_type)
113 , _in_configure_processors (false)
114 , _initial_io_setup (false)
115 , _in_sidechain_setup (false)
117 , _custom_meter_position_noted (false)
119 , _patch_selector_dialog (0)
121 processor_max_streams.reset();
124 boost::weak_ptr<Route>
125 Route::weakroute () {
126 return boost::weak_ptr<Route> (boost::dynamic_pointer_cast<Route> (shared_from_this ()));
132 /* set default meter type */
134 _meter_type = Config->get_meter_type_master ();
136 else if (dynamic_cast<Track*>(this)) {
137 _meter_type = Config->get_meter_type_track ();
139 _meter_type = Config->get_meter_type_bus ();
142 /* add standard controls */
144 _gain_control.reset (new GainControl (_session, GainAutomation));
145 _trim_control.reset (new GainControl (_session, TrimAutomation));
146 /* While the route has-a gain-control for consistency with Stripable and VCA
147 * ownership is handed over to the Amp Processor which manages the
148 * state of the Control and AutomationList as part of its
149 * Automatable API. -- Don't call add_control () here.
152 _solo_control.reset (new SoloControl (_session, X_("solo"), *this, *this));
153 add_control (_solo_control);
154 _solo_control->Changed.connect_same_thread (*this, boost::bind (&Route::solo_control_changed, this, _1, _2));
156 _mute_control.reset (new MuteControl (_session, X_("mute"), *this));
157 add_control (_mute_control);
159 _phase_control.reset (new PhaseControl (_session, X_("phase")));
160 add_control (_phase_control);
162 _solo_isolate_control.reset (new SoloIsolateControl (_session, X_("solo-iso"), *this, *this));
163 add_control (_solo_isolate_control);
165 _solo_safe_control.reset (new SoloSafeControl (_session, X_("solo-safe")));
166 add_control (_solo_safe_control);
170 if (!(_presentation_info.flags() & PresentationInfo::MonitorOut)) {
171 _pannable.reset (new Pannable (_session));
174 /* input and output objects */
176 _input.reset (new IO (_session, _name, IO::Input, _default_type));
177 _output.reset (new IO (_session, _name, IO::Output, _default_type));
179 _input->changed.connect_same_thread (*this, boost::bind (&Route::input_change_handler, this, _1, _2));
180 _input->PortCountChanging.connect_same_thread (*this, boost::bind (&Route::input_port_count_changing, this, _1));
182 _output->changed.connect_same_thread (*this, boost::bind (&Route::output_change_handler, this, _1, _2));
183 _output->PortCountChanging.connect_same_thread (*this, boost::bind (&Route::output_port_count_changing, this, _1));
185 /* add the amp/fader processor.
186 * it should be the first processor to be added on every route.
189 _amp.reset (new Amp (_session, X_("Fader"), _gain_control, true));
190 add_processor (_amp, PostFader);
193 _amp->set_display_name (_("Monitor"));
196 #if 0 // not used - just yet
197 if (!is_master() && !is_monitor() && !is_auditioner()) {
198 _delayline.reset (new DelayLine (_session, _name));
199 add_processor (_delayline, PreFader);
205 _trim.reset (new Amp (_session, X_("Trim"), _trim_control, false));
206 _trim->set_display_to_user (false);
208 if (dynamic_cast<AudioTrack*>(this)) {
209 /* we can't do this in the AudioTrack's constructor
210 * because _trim does not exit then
214 else if (!dynamic_cast<Track*>(this) && ! ( is_monitor() || is_auditioner() )) {
219 /* create standard processors: meter, main outs, monitor out;
220 they will be added to _processors by setup_invisible_processors ()
223 _meter.reset (new PeakMeter (_session, _name));
224 _meter->set_owner (this);
225 _meter->set_display_to_user (false);
228 _main_outs.reset (new Delivery (_session, _output, _pannable, _mute_master, _name, Delivery::Main));
229 _main_outs->activate ();
232 /* where we listen to tracks */
233 _intreturn.reset (new InternalReturn (_session));
234 _intreturn->activate ();
236 /* the thing that provides proper control over a control/monitor/listen bus
237 (such as per-channel cut, dim, solo, invert, etc).
239 _monitor_control.reset (new MonitorProcessor (_session));
240 _monitor_control->activate ();
243 /* now that we have _meter, its safe to connect to this */
246 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
247 configure_processors (0);
255 DEBUG_TRACE (DEBUG::Destruction, string_compose ("route %1 destructor\n", _name));
257 /* do this early so that we don't get incoming signals as we are going through destruction
262 /* don't use clear_processors here, as it depends on the session which may
263 be half-destroyed by now
266 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
267 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
268 (*i)->drop_references ();
271 _processors.clear ();
275 Route::ensure_track_or_route_name(string name, Session &session)
277 string newname = name;
279 while (!session.io_name_is_legal (newname)) {
280 newname = bump_name_once (newname, ' ');
287 Route::set_trim (gain_t val, Controllable::GroupControlDisposition /* group override */)
289 // TODO route group, see set_gain()
290 // _trim_control->route_set_value (val);
294 Route::maybe_declick (BufferSet&, samplecnt_t, int)
296 /* this is the "bus" implementation and they never declick.
301 /** Process this route for one (sub) cycle (process thread)
303 * @param bufs Scratch buffers to use for the signal path
304 * @param start_sample Initial transport sample
305 * @param end_sample Final transport sample
306 * @param nframes Number of samples to output (to ports)
308 * Note that (end_sample - start_sample) may not be equal to nframes when the
309 * transport speed isn't 1.0 (eg varispeed).
312 Route::process_output_buffers (BufferSet& bufs,
313 samplepos_t start_sample, samplepos_t end_sample, pframes_t nframes,
314 int declick, bool gain_automation_ok)
316 /* Caller must hold process lock */
317 assert (!AudioEngine::instance()->process_lock().trylock());
319 Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
321 // can this actually happen? functions calling process_output_buffers()
322 // already take a reader-lock.
323 bufs.silence (nframes, 0);
327 automation_run (start_sample, nframes);
329 /* figure out if we're going to use gain automation */
330 if (gain_automation_ok) {
331 _amp->set_gain_automation_buffer (_session.gain_automation_buffer ());
332 _amp->setup_gain_automation (
333 start_sample + _amp->output_latency (),
334 end_sample + _amp->output_latency (),
337 _trim->set_gain_automation_buffer (_session.trim_automation_buffer ());
338 _trim->setup_gain_automation (
339 start_sample + _trim->output_latency (),
340 end_sample + _trim->output_latency (),
344 /* Tell main outs what to do about monitoring. We do this so that
345 on a transition between monitoring states we get a de-clicking gain
346 change in the _main_outs delivery, if config.get_use_monitor_fades()
349 We override this in the case where we have an internal generator.
351 bool silence = _have_internal_generator ? false : (monitoring_state () == MonitoringSilence);
353 _main_outs->no_outs_cuz_we_no_monitor (silence);
355 /* -------------------------------------------------------------------------------------------
356 GLOBAL DECLICK (for transport changes etc.)
357 ----------------------------------------------------------------------------------------- */
359 maybe_declick (bufs, nframes, declick);
360 _pending_declick = 0;
362 /* -------------------------------------------------------------------------------------------
363 DENORMAL CONTROL/PHASE INVERT
364 ----------------------------------------------------------------------------------------- */
366 if (!_phase_control->none()) {
370 if (_denormal_protection || Config->get_denormal_protection()) {
372 for (BufferSet::audio_iterator i = bufs.audio_begin(); i != bufs.audio_end(); ++i, ++chn) {
373 Sample* const sp = i->data();
375 if (_phase_control->inverted (chn)) {
376 for (pframes_t nx = 0; nx < nframes; ++nx) {
381 for (pframes_t nx = 0; nx < nframes; ++nx) {
389 for (BufferSet::audio_iterator i = bufs.audio_begin(); i != bufs.audio_end(); ++i, ++chn) {
390 Sample* const sp = i->data();
392 if (_phase_control->inverted (chn)) {
393 for (pframes_t nx = 0; nx < nframes; ++nx) {
402 if (_denormal_protection || Config->get_denormal_protection()) {
404 for (BufferSet::audio_iterator i = bufs.audio_begin(); i != bufs.audio_end(); ++i) {
405 Sample* const sp = i->data();
406 for (pframes_t nx = 0; nx < nframes; ++nx) {
414 /* -------------------------------------------------------------------------------------------
416 ----------------------------------------------------------------------------------------- */
418 /* set this to be true if the meter will already have been ::run() earlier */
419 bool const meter_already_run = metering_state() == MeteringInput;
421 samplecnt_t latency = 0;
422 const double speed = (is_auditioner() ? 1.0 : _session.transport_speed ());
424 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
426 if (meter_already_run && boost::dynamic_pointer_cast<PeakMeter> (*i)) {
427 /* don't ::run() the meter, otherwise it will have its previous peak corrupted */
432 /* if it has any inputs, make sure they match */
433 if (boost::dynamic_pointer_cast<UnknownProcessor> (*i) == 0 && (*i)->input_streams() != ChanCount::ZERO) {
434 if (bufs.count() != (*i)->input_streams()) {
436 DEBUG::Processors, string_compose (
437 "input port mismatch %1 bufs = %2 input for %3 = %4\n",
438 _name, bufs.count(), (*i)->name(), (*i)->input_streams()
445 /* should we NOT run plugins here if the route is inactive?
446 do we catch route != active somewhere higher?
449 if (boost::dynamic_pointer_cast<Send>(*i) != 0) {
450 boost::dynamic_pointer_cast<Send>(*i)->set_delay_in(_signal_latency - latency);
452 if (boost::dynamic_pointer_cast<PluginInsert>(*i) != 0) {
453 const samplecnt_t longest_session_latency = _initial_delay + _signal_latency;
454 boost::dynamic_pointer_cast<PluginInsert>(*i)->set_sidechain_latency (
455 _initial_delay + latency, longest_session_latency - latency);
458 //cerr << name() << " run " << (*i)->name() << endl;
459 (*i)->run (bufs, start_sample - latency, end_sample - latency, speed, nframes, *i != _processors.back());
460 bufs.set_count ((*i)->output_streams());
462 if ((*i)->active ()) {
463 latency += (*i)->signal_latency ();
469 Route::bounce_process (BufferSet& buffers, samplepos_t start, samplecnt_t nframes,
470 boost::shared_ptr<Processor> endpoint,
471 bool include_endpoint, bool for_export, bool for_freeze)
473 /* If no processing is required, there's no need to go any further. */
474 if (!endpoint && !include_endpoint) {
478 samplecnt_t latency = bounce_get_latency(_amp, false, for_export, for_freeze);
479 _amp->set_gain_automation_buffer (_session.gain_automation_buffer ());
480 _amp->setup_gain_automation (start - latency, start - latency + nframes, nframes);
482 /* trim is always at the top, for bounce no latency compensation is needed */
483 _trim->set_gain_automation_buffer (_session.trim_automation_buffer ());
484 _trim->setup_gain_automation (start, start + nframes, nframes);
487 const double speed = _session.transport_speed ();
488 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
490 if (!include_endpoint && (*i) == endpoint) {
494 /* if we're *not* exporting, stop processing if we come across a routing processor. */
495 if (!for_export && boost::dynamic_pointer_cast<PortInsert>(*i)) {
498 if (!for_export && for_freeze && (*i)->does_routing() && (*i)->active()) {
502 /* special case the panner (export outputs)
503 * Ideally we'd only run the panner, not the delivery itself...
504 * but panners need separate input/output buffers and some context
505 * (panshell, panner type, etc). AFAICT there is no ill side effect
506 * of re-using the main delivery when freewheeling/exporting a region.
508 if ((*i) == _main_outs) {
509 assert ((*i)->does_routing());
510 (*i)->run (buffers, start - latency, start - latency + nframes, speed, nframes, true);
511 buffers.set_count ((*i)->output_streams());
514 /* don't run any processors that do routing.
515 * Also don't bother with metering.
517 if (!(*i)->does_routing() && !boost::dynamic_pointer_cast<PeakMeter>(*i)) {
518 (*i)->run (buffers, start - latency, start - latency + nframes, 1.0, nframes, true);
519 buffers.set_count ((*i)->output_streams());
520 latency += (*i)->signal_latency ();
523 if ((*i) == endpoint) {
530 Route::bounce_get_latency (boost::shared_ptr<Processor> endpoint,
531 bool include_endpoint, bool for_export, bool for_freeze) const
533 samplecnt_t latency = 0;
534 if (!endpoint && !include_endpoint) {
538 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
539 if (!include_endpoint && (*i) == endpoint) {
542 if (!for_export && boost::dynamic_pointer_cast<PortInsert>(*i)) {
545 if (!for_export && for_freeze && (*i)->does_routing() && (*i)->active()) {
548 if (!(*i)->does_routing() && !boost::dynamic_pointer_cast<PeakMeter>(*i)) {
549 latency += (*i)->signal_latency ();
551 if ((*i) == endpoint) {
559 Route::bounce_get_output_streams (ChanCount &cc, boost::shared_ptr<Processor> endpoint,
560 bool include_endpoint, bool for_export, bool for_freeze) const
562 if (!endpoint && !include_endpoint) {
566 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
567 if (!include_endpoint && (*i) == endpoint) {
570 if (!for_export && boost::dynamic_pointer_cast<PortInsert>(*i)) {
573 if (!for_export && for_freeze && (*i)->does_routing() && (*i)->active()) {
576 if (!(*i)->does_routing() && !boost::dynamic_pointer_cast<PeakMeter>(*i)) {
577 cc = (*i)->output_streams();
579 if ((*i) == endpoint) {
587 Route::n_process_buffers ()
589 return max (_input->n_ports(), processor_max_streams);
593 Route::monitor_run (samplepos_t start_sample, samplepos_t end_sample, pframes_t nframes, int declick)
595 assert (is_monitor());
596 BufferSet& bufs (_session.get_route_buffers (n_process_buffers()));
597 fill_buffers_with_input (bufs, _input, nframes);
598 passthru (bufs, start_sample, end_sample, nframes, declick, true);
602 Route::passthru (BufferSet& bufs, samplepos_t start_sample, samplepos_t end_sample, pframes_t nframes, int declick, bool gain_automation_ok)
606 if (is_monitor() && _session.listening() && !_session.is_auditioning()) {
608 /* control/monitor bus ignores input ports when something is
609 feeding the listen "stream". data will "arrive" into the
610 route from the intreturn processor element.
613 bufs.silence (nframes, 0);
616 /* append immediate messages to the first MIDI buffer (thus sending it to the first output port) */
618 write_out_of_band_data (bufs, start_sample, end_sample, nframes);
620 /* run processor chain */
622 process_output_buffers (bufs, start_sample, end_sample, nframes, declick, gain_automation_ok);
626 Route::passthru_silence (samplepos_t start_sample, samplepos_t end_sample, pframes_t nframes, int declick)
628 BufferSet& bufs (_session.get_route_buffers (n_process_buffers(), true));
630 bufs.set_count (_input->n_ports());
631 write_out_of_band_data (bufs, start_sample, end_sample, nframes);
632 process_output_buffers (bufs, start_sample, end_sample, nframes, declick, false);
636 Route::set_listen (bool yn)
639 if (_monitor_send->active() == yn) {
643 _monitor_send->activate ();
645 _monitor_send->deactivate ();
651 Route::solo_control_changed (bool, Controllable::GroupControlDisposition)
653 /* nothing to do if we're not using AFL/PFL. But if we are, we need
654 to alter the active state of the monitor send.
657 if (Config->get_solo_control_is_listen_control ()) {
658 set_listen (_solo_control->self_soloed() || _solo_control->get_masters_value());
663 Route::push_solo_isolate_upstream (int32_t delta)
665 /* forward propagate solo-isolate status to everything fed by this route, but not those via sends only */
667 boost::shared_ptr<RouteList> routes = _session.get_routes ();
668 for (RouteList::iterator i = routes->begin(); i != routes->end(); ++i) {
670 if ((*i).get() == this || !(*i)->can_solo()) {
675 bool does_feed = feeds (*i, &sends_only);
677 if (does_feed && !sends_only) {
678 (*i)->solo_isolate_control()->mod_solo_isolated_by_upstream (delta);
684 Route::push_solo_upstream (int delta)
686 DEBUG_TRACE (DEBUG::Solo, string_compose("\t ... INVERT push from %1\n", _name));
687 for (FedBy::iterator i = _fed_by.begin(); i != _fed_by.end(); ++i) {
691 boost::shared_ptr<Route> sr (i->r.lock());
693 sr->solo_control()->mod_solo_by_others_downstream (-delta);
700 dump_processors(const string& name, const list<boost::shared_ptr<Processor> >& procs)
702 cerr << name << " {" << endl;
703 for (list<boost::shared_ptr<Processor> >::const_iterator p = procs.begin();
704 p != procs.end(); ++p) {
705 cerr << "\t" << (*p)->name() << " ID = " << (*p)->id() << " @ " << (*p) << endl;
711 /** Supposing that we want to insert a Processor at a given Placement, return
712 * the processor to add the new one before (or 0 to add at the end).
714 boost::shared_ptr<Processor>
715 Route::before_processor_for_placement (Placement p)
717 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
719 ProcessorList::iterator loc;
722 /* generic pre-fader: insert immediately before the amp */
723 loc = find (_processors.begin(), _processors.end(), _amp);
725 /* generic post-fader: insert right before the main outs */
726 loc = find (_processors.begin(), _processors.end(), _main_outs);
729 return loc != _processors.end() ? *loc : boost::shared_ptr<Processor> ();
732 /** Supposing that we want to insert a Processor at a given index, return
733 * the processor to add the new one before (or 0 to add at the end).
735 boost::shared_ptr<Processor>
736 Route::before_processor_for_index (int index)
739 return boost::shared_ptr<Processor> ();
742 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
744 ProcessorList::iterator i = _processors.begin ();
746 while (i != _processors.end() && j < index) {
747 if ((*i)->display_to_user()) {
754 return (i != _processors.end() ? *i : boost::shared_ptr<Processor> ());
757 /** Add a processor either pre- or post-fader
758 * @return 0 on success, non-0 on failure.
761 Route::add_processor (boost::shared_ptr<Processor> processor, Placement placement, ProcessorStreams* err, bool activation_allowed)
763 return add_processor (processor, before_processor_for_placement (placement), err, activation_allowed);
767 /** Add a processor to a route such that it ends up with a given index into the visible processors.
768 * @param index Index to add the processor at, or -1 to add at the end of the list.
769 * @return 0 on success, non-0 on failure.
772 Route::add_processor_by_index (boost::shared_ptr<Processor> processor, int index, ProcessorStreams* err, bool activation_allowed)
774 return add_processor (processor, before_processor_for_index (index), err, activation_allowed);
777 /** Add a processor to the route.
778 * @param before An existing processor in the list, or 0; the new processor will be inserted immediately before it (or at the end).
779 * @return 0 on success, non-0 on failure.
782 Route::add_processor (boost::shared_ptr<Processor> processor, boost::shared_ptr<Processor> before, ProcessorStreams* err, bool activation_allowed)
784 assert (processor != _meter);
785 assert (processor != _main_outs);
787 DEBUG_TRACE (DEBUG::Processors, string_compose (
788 "%1 adding processor %2\n", name(), processor->name()));
792 pl.push_back (processor);
793 int rv = add_processors (pl, before, err);
799 if (activation_allowed && (!_session.get_bypass_all_loaded_plugins () || !processor->display_to_user ())) {
800 processor->activate ();
807 Route::processor_selfdestruct (boost::weak_ptr<Processor> wp)
809 /* We cannot destruct the processor here (usually RT-thread
810 * with various locks held - in case of sends also io_locks).
811 * Queue for deletion in low-priority thread.
813 Glib::Threads::Mutex::Lock lx (selfdestruct_lock);
814 selfdestruct_sequence.push_back (wp);
818 Route::add_processor_from_xml_2X (const XMLNode& node, int version)
820 XMLProperty const * prop;
823 boost::shared_ptr<Processor> processor;
825 /* bit of a hack: get the `placement' property from the <Redirect> tag here
826 so that we can add the processor in the right place (pre/post-fader)
829 XMLNodeList const & children = node.children ();
830 XMLNodeList::const_iterator i = children.begin ();
832 while (i != children.end() && (*i)->name() != X_("Redirect")) {
836 Placement placement = PreFader;
838 if (i != children.end()) {
839 if ((prop = (*i)->property (X_("placement"))) != 0) {
840 placement = Placement (string_2_enum (prop->value(), placement));
844 if (node.name() == "Insert") {
846 if ((prop = node.property ("type")) != 0) {
848 if (prop->value() == "ladspa" || prop->value() == "Ladspa" ||
849 prop->value() == "lv2" ||
850 prop->value() == "windows-vst" ||
851 prop->value() == "mac-vst" ||
852 prop->value() == "lxvst" ||
853 prop->value() == "audiounit") {
855 if (_session.get_disable_all_loaded_plugins ()) {
856 processor.reset (new UnknownProcessor (_session, node));
858 processor.reset (new PluginInsert (_session));
859 processor->set_owner (this);
864 processor.reset (new PortInsert (_session, _pannable, _mute_master));
869 } else if (node.name() == "Send") {
871 boost::shared_ptr<Pannable> sendpan (new Pannable (_session));
872 processor.reset (new Send (_session, sendpan, _mute_master));
876 error << string_compose(_("unknown Processor type \"%1\"; ignored"), node.name()) << endmsg;
880 if (processor->set_state (node, version)) {
884 //A2 uses the "active" flag in the toplevel redirect node, not in the child plugin/IO
885 if (i != children.end()) {
886 if ((prop = (*i)->property (X_("active"))) != 0) {
887 if ( string_to<bool> (prop->value()) && (!_session.get_bypass_all_loaded_plugins () || !processor->display_to_user () ) )
888 processor->activate();
890 processor->deactivate();
894 return (add_processor (processor, placement, 0, false) == 0);
897 catch (failed_constructor &err) {
898 warning << _("processor could not be created. Ignored.") << endmsg;
904 inline Route::PluginSetupOptions operator|= (Route::PluginSetupOptions& a, const Route::PluginSetupOptions& b) {
905 return a = static_cast<Route::PluginSetupOptions> (static_cast <int>(a) | static_cast<int> (b));
908 inline Route::PluginSetupOptions operator&= (Route::PluginSetupOptions& a, const Route::PluginSetupOptions& b) {
909 return a = static_cast<Route::PluginSetupOptions> (static_cast <int>(a) & static_cast<int> (b));
913 Route::add_processors (const ProcessorList& others, boost::shared_ptr<Processor> before, ProcessorStreams* err)
915 ProcessorList::iterator loc;
916 boost::shared_ptr <PluginInsert> fanout;
918 if (g_atomic_int_get (&_pending_process_reorder)) {
919 /* we need to flush any pending re-order changes */
920 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
921 apply_processor_changes_rt ();
925 loc = find(_processors.begin(), _processors.end(), before);
926 if (loc == _processors.end ()) {
930 /* nothing specified - at end */
931 loc = _processors.end ();
934 if (others.empty()) {
938 ProcessorList to_skip;
940 // check if there's an instrument to replace or configure
941 for (ProcessorList::const_iterator i = others.begin(); i != others.end(); ++i) {
942 boost::shared_ptr<PluginInsert> pi;
943 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(*i)) == 0) {
946 if (!pi->plugin ()->get_info ()->is_instrument ()) {
949 boost::shared_ptr<Processor> instrument = the_instrument ();
950 ChanCount in (DataType::MIDI, 1);
951 ChanCount out (DataType::AUDIO, 2); // XXX route's out?!
953 PluginSetupOptions flags = None;
956 in = instrument->input_streams ();
957 out = instrument->output_streams ();
959 if (pi->has_output_presets (in, out)) {
963 pi->set_strict_io (_strict_io);
965 PluginSetupOptions mask = None;
966 if (Config->get_ask_replace_instrument ()) {
969 if (Config->get_ask_setup_instrument ()) {
976 boost::optional<int> rv = PluginSetup (boost::dynamic_pointer_cast<Route>(shared_from_this ()), pi, flags); /* EMIT SIGNAL */
977 int mode = rv.get_value_or (0);
980 to_skip.push_back (*i); // don't add this one;
983 replace_processor (instrument, *i, err);
984 to_skip.push_back (*i);
989 if ((mode & 5) == 4) {
996 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
997 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
998 ProcessorState pstate (this);
1000 for (ProcessorList::const_iterator i = others.begin(); i != others.end(); ++i) {
1005 ProcessorList::iterator check = find (to_skip.begin(), to_skip.end(), *i);
1006 if (check != to_skip.end()) {
1010 boost::shared_ptr<PluginInsert> pi;
1012 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(*i)) != 0) {
1013 pi->set_strict_io (_strict_io);
1017 /* Ensure that only one amp is in the list at any time */
1018 ProcessorList::iterator check = find (_processors.begin(), _processors.end(), *i);
1019 if (check != _processors.end()) {
1020 if (before == _amp) {
1021 /* Already in position; all is well */
1024 _processors.erase (check);
1029 assert (find (_processors.begin(), _processors.end(), *i) == _processors.end ());
1031 _processors.insert (loc, *i);
1032 (*i)->set_owner (this);
1035 if (configure_processors_unlocked (err, &lm)) {
1037 configure_processors_unlocked (0, &lm); // it worked before we tried to add it ...
1042 if (pi && pi->has_sidechain ()) {
1043 pi->sidechain_input ()->changed.connect_same_thread (*this, boost::bind (&Route::sidechain_change_handler, this, _1, _2));
1046 if ((*i)->active()) {
1047 // emit ActiveChanged() and latency_changed() if needed
1051 (*i)->ActiveChanged.connect_same_thread (*this, boost::bind (&Session::update_latency_compensation, &_session, false));
1053 boost::shared_ptr<Send> send;
1054 if ((send = boost::dynamic_pointer_cast<Send> (*i))) {
1055 send->SelfDestruct.connect_same_thread (*this,
1056 boost::bind (&Route::processor_selfdestruct, this, boost::weak_ptr<Processor> (*i)));
1060 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
1061 boost::shared_ptr<PluginInsert> pi;
1063 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(*i)) != 0) {
1064 if (pi->has_no_inputs ()) {
1065 _have_internal_generator = true;
1071 _output->set_user_latency (0);
1074 reset_instrument_info ();
1075 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
1076 set_processor_positions ();
1078 if (fanout && fanout->configured ()
1079 && fanout->output_streams().n_audio() > 2
1080 && boost::dynamic_pointer_cast<PluginInsert> (the_instrument ()) == fanout) {
1081 fan_out (); /* EMIT SIGNAL */
1087 Route::placement_range(Placement p, ProcessorList::iterator& start, ProcessorList::iterator& end)
1089 if (p == PreFader) {
1090 start = _processors.begin();
1091 end = find(_processors.begin(), _processors.end(), _amp);
1093 start = find(_processors.begin(), _processors.end(), _amp);
1095 end = _processors.end();
1099 /** Turn off all processors with a given placement
1100 * @param p Placement of processors to disable
1103 Route::disable_processors (Placement p)
1105 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
1107 ProcessorList::iterator start, end;
1108 placement_range(p, start, end);
1110 for (ProcessorList::iterator i = start; i != end; ++i) {
1111 (*i)->enable (false);
1114 _session.set_dirty ();
1117 /** Turn off all redirects
1120 Route::disable_processors ()
1122 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
1124 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
1125 (*i)->enable (false);
1128 _session.set_dirty ();
1131 /** Turn off all redirects with a given placement
1132 * @param p Placement of redirects to disable
1135 Route::disable_plugins (Placement p)
1137 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
1139 ProcessorList::iterator start, end;
1140 placement_range(p, start, end);
1142 for (ProcessorList::iterator i = start; i != end; ++i) {
1143 if (boost::dynamic_pointer_cast<PluginInsert> (*i)) {
1144 (*i)->enable (false);
1148 _session.set_dirty ();
1151 /** Turn off all plugins
1154 Route::disable_plugins ()
1156 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
1158 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
1159 if (boost::dynamic_pointer_cast<PluginInsert> (*i)) {
1160 (*i)->enable (false);
1164 _session.set_dirty ();
1169 Route::ab_plugins (bool forward)
1171 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
1175 /* forward = turn off all active redirects, and mark them so that the next time
1176 we go the other way, we will revert them
1179 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
1180 if (!boost::dynamic_pointer_cast<PluginInsert> (*i)) {
1183 if (!(*i)->display_to_user ()) {
1187 if (boost::dynamic_pointer_cast<PluginInsert> (*i)->is_channelstrip()) {
1192 if ((*i)->enabled ()) {
1193 (*i)->enable (false);
1194 (*i)->set_next_ab_is_active (true);
1196 (*i)->set_next_ab_is_active (false);
1202 /* backward = if the redirect was marked to go active on the next ab, do so */
1204 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
1205 if (!boost::dynamic_pointer_cast<PluginInsert> (*i)) {
1208 if (!(*i)->display_to_user ()) {
1212 if (boost::dynamic_pointer_cast<PluginInsert> (*i)->is_channelstrip()) {
1217 (*i)->enable ((*i)->get_next_ab_is_active ());
1221 _session.set_dirty ();
1225 /** Remove processors with a given placement.
1226 * @param p Placement of processors to remove.
1229 Route::clear_processors (Placement p)
1231 if (!_session.engine().connected()) {
1235 bool already_deleting = _session.deletion_in_progress();
1236 if (!already_deleting) {
1237 _session.set_deletion_in_progress();
1240 ProcessorList old_list = _processors;
1242 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
1243 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
1244 ProcessorList new_list;
1245 ProcessorStreams err;
1246 bool seen_amp = false;
1248 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
1254 if (is_internal_processor (*i)) {
1256 /* you can't remove these */
1258 new_list.push_back (*i);
1265 new_list.push_back (*i);
1268 (*i)->drop_references ();
1276 (*i)->drop_references ();
1279 new_list.push_back (*i);
1286 _processors = new_list;
1287 configure_processors_unlocked (&err, &lm); // this can't fail
1289 /* drop references w/o process-lock (I/O procs may re-take it in ~IO() */
1292 processor_max_streams.reset();
1293 _have_internal_generator = false;
1294 reset_instrument_info ();
1295 set_processor_positions ();
1297 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
1299 if (!already_deleting) {
1300 _session.clear_deletion_in_progress();
1305 Route::is_internal_processor (boost::shared_ptr<Processor> p) const
1307 if (p == _amp || p == _meter || p == _main_outs || p == _delayline || p == _trim) {
1314 Route::remove_processor (boost::shared_ptr<Processor> processor, ProcessorStreams* err, bool need_process_lock)
1316 // TODO once the export point can be configured properly, do something smarter here
1317 if (processor == _capturing_processor) {
1318 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock (), Glib::Threads::NOT_LOCK);
1319 if (need_process_lock) {
1323 _capturing_processor.reset();
1325 if (need_process_lock) {
1330 /* these can never be removed */
1332 if (is_internal_processor (processor)) {
1336 if (!_session.engine().connected()) {
1340 processor_max_streams.reset();
1343 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock (), Glib::Threads::NOT_LOCK);
1344 if (need_process_lock) {
1348 /* Caller must hold process lock */
1349 assert (!AudioEngine::instance()->process_lock().trylock());
1351 Glib::Threads::RWLock::WriterLock lm (_processor_lock); // XXX deadlock after export
1353 ProcessorState pstate (this);
1355 ProcessorList::iterator i;
1356 bool removed = false;
1358 for (i = _processors.begin(); i != _processors.end(); ) {
1359 if (*i == processor) {
1361 /* move along, see failure case for configure_processors()
1362 where we may need to reconfigure the processor.
1365 /* stop redirects that send signals to JACK ports
1366 from causing noise as a result of no longer being
1370 boost::shared_ptr<IOProcessor> iop = boost::dynamic_pointer_cast<IOProcessor> (*i);
1371 boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert>(*i);
1375 iop = pi->sidechain();
1382 i = _processors.erase (i);
1390 _output->set_user_latency (0);
1398 if (configure_processors_unlocked (err, &lm)) {
1400 /* we know this will work, because it worked before :) */
1401 configure_processors_unlocked (0, &lm);
1405 _have_internal_generator = false;
1407 for (i = _processors.begin(); i != _processors.end(); ++i) {
1408 boost::shared_ptr<PluginInsert> pi;
1410 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(*i)) != 0) {
1411 if (pi->has_no_inputs ()) {
1412 _have_internal_generator = true;
1417 if (need_process_lock) {
1422 reset_instrument_info ();
1423 processor->drop_references ();
1424 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
1425 set_processor_positions ();
1431 Route::replace_processor (boost::shared_ptr<Processor> old, boost::shared_ptr<Processor> sub, ProcessorStreams* err)
1433 /* these can never be removed */
1434 if (is_internal_processor (old)) {
1437 /* and can't be used as substitute, either */
1438 if (is_internal_processor (sub)) {
1442 /* I/Os are out, too */
1443 if (boost::dynamic_pointer_cast<IOProcessor> (old) || boost::dynamic_pointer_cast<IOProcessor> (sub)) {
1447 /* this function cannot be used to swap/reorder processors */
1448 if (find (_processors.begin(), _processors.end(), sub) != _processors.end ()) {
1452 if (!AudioEngine::instance()->connected() || !old || !sub) {
1456 /* ensure that sub is not owned by another route */
1457 if (sub->owner ()) {
1462 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
1463 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
1464 ProcessorState pstate (this);
1466 assert (find (_processors.begin(), _processors.end(), sub) == _processors.end ());
1468 ProcessorList::iterator i;
1469 bool replaced = false;
1470 bool enable = old->enabled ();
1472 for (i = _processors.begin(); i != _processors.end(); ) {
1474 i = _processors.erase (i);
1475 _processors.insert (i, sub);
1476 sub->set_owner (this);
1489 boost::shared_ptr<PluginInsert> pi;
1490 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(sub)) != 0) {
1491 pi->set_strict_io (true);
1495 if (configure_processors_unlocked (err, &lm)) {
1497 configure_processors_unlocked (0, &lm);
1501 _have_internal_generator = false;
1503 for (i = _processors.begin(); i != _processors.end(); ++i) {
1504 boost::shared_ptr<PluginInsert> pi;
1505 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(*i)) != 0) {
1506 if (pi->has_no_inputs ()) {
1507 _have_internal_generator = true;
1517 sub->ActiveChanged.connect_same_thread (*this, boost::bind (&Session::update_latency_compensation, &_session, false));
1518 _output->set_user_latency (0);
1521 reset_instrument_info ();
1522 old->drop_references ();
1523 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
1524 set_processor_positions ();
1529 Route::remove_processors (const ProcessorList& to_be_deleted, ProcessorStreams* err)
1531 ProcessorList deleted;
1533 if (!_session.engine().connected()) {
1537 processor_max_streams.reset();
1540 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
1541 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
1542 ProcessorState pstate (this);
1544 ProcessorList::iterator i;
1545 boost::shared_ptr<Processor> processor;
1547 for (i = _processors.begin(); i != _processors.end(); ) {
1551 /* these can never be removed */
1553 if (is_internal_processor (processor)) {
1558 /* see if its in the list of processors to delete */
1560 if (find (to_be_deleted.begin(), to_be_deleted.end(), processor) == to_be_deleted.end()) {
1565 /* stop IOProcessors that send to JACK ports
1566 from causing noise as a result of no longer being
1570 boost::shared_ptr<IOProcessor> iop = boost::dynamic_pointer_cast<IOProcessor>(processor);
1571 boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert>(processor);
1574 iop = pi->sidechain();
1581 deleted.push_back (processor);
1582 i = _processors.erase (i);
1585 if (deleted.empty()) {
1586 /* none of those in the requested list were found */
1590 _output->set_user_latency (0);
1592 if (configure_processors_unlocked (err, &lm)) {
1594 /* we know this will work, because it worked before :) */
1595 configure_processors_unlocked (0, &lm);
1600 _have_internal_generator = false;
1602 for (i = _processors.begin(); i != _processors.end(); ++i) {
1603 boost::shared_ptr<PluginInsert> pi;
1605 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(*i)) != 0) {
1606 if (pi->has_no_inputs ()) {
1607 _have_internal_generator = true;
1614 /* now try to do what we need to so that those that were removed will be deleted */
1616 for (ProcessorList::iterator i = deleted.begin(); i != deleted.end(); ++i) {
1617 (*i)->drop_references ();
1620 reset_instrument_info ();
1621 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
1622 set_processor_positions ();
1628 Route::reset_instrument_info ()
1630 boost::shared_ptr<Processor> instr = the_instrument();
1632 _instrument_info.set_internal_instrument (instr);
1636 /** Caller must hold process lock */
1638 Route::configure_processors (ProcessorStreams* err)
1640 #ifndef PLATFORM_WINDOWS
1641 assert (!AudioEngine::instance()->process_lock().trylock());
1644 if (!_in_configure_processors) {
1645 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
1646 return configure_processors_unlocked (err, &lm);
1653 Route::input_streams () const
1655 return _input->n_ports ();
1658 list<pair<ChanCount, ChanCount> >
1659 Route::try_configure_processors (ChanCount in, ProcessorStreams* err)
1661 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
1663 return try_configure_processors_unlocked (in, err);
1666 list<pair<ChanCount, ChanCount> >
1667 Route::try_configure_processors_unlocked (ChanCount in, ProcessorStreams* err)
1669 // Check each processor in order to see if we can configure as requested
1671 list<pair<ChanCount, ChanCount> > configuration;
1674 DEBUG_TRACE (DEBUG::Processors, string_compose ("%1: configure processors\n", _name));
1675 DEBUG_TRACE (DEBUG::Processors, "{\n");
1677 for (ProcessorList::iterator p = _processors.begin(); p != _processors.end(); ++p, ++index) {
1679 if ((*p)->can_support_io_configuration(in, out)) {
1681 if (boost::dynamic_pointer_cast<Delivery> (*p)
1682 && boost::dynamic_pointer_cast<Delivery> (*p)->role() == Delivery::Main
1684 && (is_monitor() || _strict_io || Profile->get_mixbus ())) {
1685 /* with strict I/O the panner + output are forced to
1686 * follow the last processor's output.
1688 * Delivery::can_support_io_configuration() will only add ports,
1689 * but not remove excess ports.
1691 * This works because the delivery only requires
1692 * as many outputs as there are inputs.
1693 * Delivery::configure_io() will do the actual removal
1694 * by calling _output->ensure_io()
1696 if (!is_master() && _session.master_out () && in.n_audio() > 0) {
1697 /* ..but at least as many as there are master-inputs, if
1698 * the delivery is dealing with audio */
1699 // XXX this may need special-casing for mixbus (master-outputs)
1700 // and should maybe be a preference anyway ?!
1701 out = ChanCount::max (in, _session.master_out ()->n_inputs ());
1707 DEBUG_TRACE (DEBUG::Processors, string_compose ("\t%1 ID=%2 in=%3 out=%4\n",(*p)->name(), (*p)->id(), in, out));
1708 configuration.push_back(make_pair(in, out));
1711 // restriction for Monitor Section Processors
1712 if (in.n_audio() != out.n_audio() || out.n_midi() > 0) {
1713 /* Note: The Monitor follows the master-bus and has no panner.
1715 * The general idea is to only allow plugins that retain the channel-count
1716 * and plugins with MIDI in (e.g VSTs with control that will remain unconnected).
1717 * Then again 5.1 in, monitor stereo is a valid use-case.
1719 * and worse: we only refuse adding plugins *here*.
1721 * 1) stereo-master, stereo-mon, add a stereo-plugin, OK
1722 * 2) change master-bus, add a channel
1723 * 2a) monitor-secion follows
1724 * 3) monitor processors fail to re-reconfigure (stereo plugin)
1725 * 4) re-load session, monitor-processor remains unconfigured, crash.
1727 DEBUG_TRACE (DEBUG::Processors, "Monitor: Channel configuration change.\n");
1729 if (boost::dynamic_pointer_cast<InternalSend> (*p)) {
1730 // internal sends make no sense, only feedback
1731 DEBUG_TRACE (DEBUG::Processors, "Monitor: No Sends allowed.\n");
1732 return list<pair<ChanCount, ChanCount> > ();
1734 if (boost::dynamic_pointer_cast<PortInsert> (*p)) {
1735 /* External Sends can be problematic. one can add/remove ports
1736 * there signal leaves the DAW to external monitors anyway, so there's
1737 * no real use for allowing them here anyway.
1739 DEBUG_TRACE (DEBUG::Processors, "Monitor: No External Sends allowed.\n");
1740 return list<pair<ChanCount, ChanCount> > ();
1742 if (boost::dynamic_pointer_cast<Send> (*p)) {
1744 DEBUG_TRACE (DEBUG::Processors, "Monitor: No Sends allowed.\n");
1745 return list<pair<ChanCount, ChanCount> > ();
1754 DEBUG_TRACE (DEBUG::Processors, "---- CONFIGURATION FAILED.\n");
1755 DEBUG_TRACE (DEBUG::Processors, string_compose ("---- %1 cannot support in=%2 out=%3\n", (*p)->name(), in, out));
1756 DEBUG_TRACE (DEBUG::Processors, "}\n");
1757 return list<pair<ChanCount, ChanCount> > ();
1761 DEBUG_TRACE (DEBUG::Processors, "}\n");
1763 return configuration;
1766 /** Set the input/output configuration of each processor in the processors list.
1767 * Caller must hold process lock.
1768 * Return 0 on success, otherwise configuration is impossible.
1771 Route::configure_processors_unlocked (ProcessorStreams* err, Glib::Threads::RWLock::WriterLock* lm)
1773 #ifndef PLATFORM_WINDOWS
1774 assert (!AudioEngine::instance()->process_lock().trylock());
1777 if (_in_configure_processors) {
1781 /* put invisible processors where they should be */
1782 setup_invisible_processors ();
1784 _in_configure_processors = true;
1786 list<pair<ChanCount, ChanCount> > configuration = try_configure_processors_unlocked (input_streams (), err);
1788 if (configuration.empty ()) {
1789 _in_configure_processors = false;
1794 bool seen_mains_out = false;
1795 processor_out_streams = _input->n_ports();
1796 processor_max_streams.reset();
1798 /* processor configure_io() may result in adding ports
1799 * e.g. Delivery::configure_io -> ARDOUR::IO::ensure_io ()
1801 * with jack2 adding ports results in a graph-order callback,
1802 * which calls Session::resort_routes() and eventually
1803 * Route::direct_feeds_according_to_reality()
1804 * which takes a ReaderLock (_processor_lock).
1806 * so we can't hold a WriterLock here until jack2 threading
1809 * NB. we still hold the process lock
1811 * (ardour's own engines do call graph-order from the
1812 * process-thread and hence do not have this issue; besides
1813 * merely adding ports won't trigger a graph-order, only
1814 * making connections does)
1818 // TODO check for a potential ReaderLock after ReaderLock ??
1819 Glib::Threads::RWLock::ReaderLock lr (_processor_lock);
1821 list< pair<ChanCount,ChanCount> >::iterator c = configuration.begin();
1822 for (ProcessorList::iterator p = _processors.begin(); p != _processors.end(); ++p, ++c) {
1824 if (!(*p)->configure_io(c->first, c->second)) {
1825 DEBUG_TRACE (DEBUG::Processors, string_compose ("%1: configuration failed\n", _name));
1826 _in_configure_processors = false;
1832 processor_max_streams = ChanCount::max(processor_max_streams, c->first);
1833 processor_max_streams = ChanCount::max(processor_max_streams, c->second);
1835 boost::shared_ptr<IOProcessor> iop;
1836 boost::shared_ptr<PluginInsert> pi;
1837 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(*p)) != 0) {
1838 /* plugins connected via Split or Hide Match may have more channels.
1839 * route/scratch buffers are needed for all of them
1840 * The configuration may only be a subset (both input and output)
1842 processor_max_streams = ChanCount::max(processor_max_streams, pi->required_buffers());
1844 else if ((iop = boost::dynamic_pointer_cast<IOProcessor>(*p)) != 0) {
1845 processor_max_streams = ChanCount::max(processor_max_streams, iop->natural_input_streams());
1846 processor_max_streams = ChanCount::max(processor_max_streams, iop->natural_output_streams());
1850 if (boost::dynamic_pointer_cast<Delivery> (*p)
1851 && boost::dynamic_pointer_cast<Delivery> (*p)->role() == Delivery::Main) {
1852 /* main delivery will increase port count to match input.
1853 * the Delivery::Main is usually the last processor - followed only by
1856 seen_mains_out = true;
1858 if (!seen_mains_out) {
1859 processor_out_streams = out;
1868 _meter->set_max_channels (processor_max_streams);
1871 /* make sure we have sufficient scratch buffers to cope with the new processor
1874 _session.ensure_buffers (n_process_buffers ());
1876 DEBUG_TRACE (DEBUG::Processors, string_compose ("%1: configuration complete\n", _name));
1878 _in_configure_processors = false;
1882 /** Set all visible processors to a given active state (except Fader, whose state is not changed)
1883 * @param state New active state for those processors.
1886 Route::all_visible_processors_active (bool state)
1888 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
1890 if (_processors.empty()) {
1894 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
1895 if (!(*i)->display_to_user() || boost::dynamic_pointer_cast<Amp> (*i)) {
1899 boost::shared_ptr<PluginInsert> pi;
1900 if (0 != (pi = boost::dynamic_pointer_cast<PluginInsert>(*i))) {
1901 if (pi->is_channelstrip ()) {
1906 (*i)->enable (state);
1909 _session.set_dirty ();
1913 Route::processors_reorder_needs_configure (const ProcessorList& new_order)
1915 /* check if re-order requires re-configuration of any processors
1916 * -> compare channel configuration for all processors
1918 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
1919 ChanCount c = input_streams ();
1921 for (ProcessorList::const_iterator j = new_order.begin(); j != new_order.end(); ++j) {
1923 if (c != (*j)->input_streams()) {
1926 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
1929 if ((*i)->input_streams() != c) {
1932 c = (*i)->output_streams();
1944 __attribute__((annotate("realtime")))
1947 Route::apply_processor_order (const ProcessorList& new_order)
1949 /* need to hold processor_lock; either read or write lock
1950 * and the engine process_lock.
1951 * Due to r/w lock ambiguity we can only assert the latter
1953 assert (!AudioEngine::instance()->process_lock().trylock());
1956 /* "new_order" is an ordered list of processors to be positioned according to "placement".
1957 * NOTE: all processors in "new_order" MUST be marked as display_to_user(). There maybe additional
1958 * processors in the current actual processor list that are hidden. Any visible processors
1959 * in the current list but not in "new_order" will be assumed to be deleted.
1962 /* "as_it_will_be" and "_processors" are lists of shared pointers.
1963 * actual memory usage is small, but insert/erase is not actually rt-safe :(
1964 * (note though that ::processors_reorder_needs_configure() ensured that
1965 * this function will only ever be called from the rt-thread if no processor were removed)
1967 * either way, I can't proove it, but an x-run due to re-order here is less likley
1968 * than an x-run-less 'ardour-silent cycle' both of which effectively "click".
1971 ProcessorList as_it_will_be;
1972 ProcessorList::iterator oiter;
1973 ProcessorList::const_iterator niter;
1975 oiter = _processors.begin();
1976 niter = new_order.begin();
1978 while (niter != new_order.end()) {
1980 /* if the next processor in the old list is invisible (i.e. should not be in the new order)
1981 then append it to the temp list.
1983 Otherwise, see if the next processor in the old list is in the new list. if not,
1984 its been deleted. If its there, append it to the temp list.
1987 if (oiter == _processors.end()) {
1989 /* no more elements in the old list, so just stick the rest of
1990 the new order onto the temp list.
1993 as_it_will_be.insert (as_it_will_be.end(), niter, new_order.end());
1994 while (niter != new_order.end()) {
2001 if (!(*oiter)->display_to_user()) {
2003 as_it_will_be.push_back (*oiter);
2007 /* visible processor: check that its in the new order */
2009 if (find (new_order.begin(), new_order.end(), (*oiter)) == new_order.end()) {
2010 /* deleted: do nothing, shared_ptr<> will clean up */
2012 /* ignore this one, and add the next item from the new order instead */
2013 as_it_will_be.push_back (*niter);
2018 /* now remove from old order - its taken care of no matter what */
2019 oiter = _processors.erase (oiter);
2023 _processors.insert (oiter, as_it_will_be.begin(), as_it_will_be.end());
2025 /* If the meter is in a custom position, find it and make a rough note of its position */
2026 maybe_note_meter_position ();
2030 Route::move_instrument_down (bool postfader)
2032 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
2033 ProcessorList new_order;
2034 boost::shared_ptr<Processor> instrument;
2035 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
2036 boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert>(*i);
2037 if (pi && pi->plugin ()->get_info ()->is_instrument ()) {
2039 } else if (instrument && *i == _amp) {
2041 new_order.push_back (*i);
2042 new_order.push_back (instrument);
2044 new_order.push_back (instrument);
2045 new_order.push_back (*i);
2048 new_order.push_back (*i);
2055 reorder_processors (new_order, 0);
2059 Route::reorder_processors (const ProcessorList& new_order, ProcessorStreams* err)
2061 // it a change is already queued, wait for it
2062 // (unless engine is stopped. apply immediately and proceed
2063 while (g_atomic_int_get (&_pending_process_reorder)) {
2064 if (!AudioEngine::instance()->running()) {
2065 DEBUG_TRACE (DEBUG::Processors, "offline apply queued processor re-order.\n");
2066 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
2068 apply_processor_order(_pending_processor_order);
2069 setup_invisible_processors ();
2071 g_atomic_int_set (&_pending_process_reorder, 0);
2073 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
2074 set_processor_positions ();
2076 // TODO rather use a semaphore or something.
2077 // but since ::reorder_processors() is called
2078 // from the GUI thread, this is fine..
2083 if (processors_reorder_needs_configure (new_order) || !AudioEngine::instance()->running()) {
2085 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
2086 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
2087 ProcessorState pstate (this);
2089 apply_processor_order (new_order);
2091 if (configure_processors_unlocked (err, &lm)) {
2099 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
2100 set_processor_positions ();
2103 DEBUG_TRACE (DEBUG::Processors, "Queue clickless processor re-order.\n");
2104 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
2106 // _pending_processor_order is protected by _processor_lock
2107 _pending_processor_order = new_order;
2108 g_atomic_int_set (&_pending_process_reorder, 1);
2111 /* update processor input/output latency
2112 * (total signal_latency does not change)
2114 update_signal_latency (true);
2120 Route::add_remove_sidechain (boost::shared_ptr<Processor> proc, bool add)
2122 boost::shared_ptr<PluginInsert> pi;
2123 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(proc)) == 0) {
2127 if (pi->has_sidechain () == add) {
2128 return true; // ?? call failed, but result is as expected.
2132 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
2133 ProcessorList::iterator i = find (_processors.begin(), _processors.end(), proc);
2134 if (i == _processors.end ()) {
2140 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ()); // take before Writerlock to avoid deadlock
2141 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
2142 PBD::Unwinder<bool> uw (_in_sidechain_setup, true);
2144 lx.release (); // IO::add_port() and ~IO takes process lock - XXX check if this is safe
2146 if (!pi->add_sidechain ()) {
2150 if (!pi->del_sidechain ()) {
2156 list<pair<ChanCount, ChanCount> > c = try_configure_processors_unlocked (n_inputs (), 0);
2161 pi->del_sidechain ();
2163 pi->add_sidechain ();
2164 // TODO restore side-chain's state.
2169 configure_processors_unlocked (0, &lm);
2172 if (pi->has_sidechain ()) {
2173 pi->sidechain_input ()->changed.connect_same_thread (*this, boost::bind (&Route::sidechain_change_handler, this, _1, _2));
2176 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
2177 _session.set_dirty ();
2182 Route::plugin_preset_output (boost::shared_ptr<Processor> proc, ChanCount outs)
2184 boost::shared_ptr<PluginInsert> pi;
2185 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(proc)) == 0) {
2190 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
2191 ProcessorList::iterator i = find (_processors.begin(), _processors.end(), proc);
2192 if (i == _processors.end ()) {
2198 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
2199 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
2201 const ChanCount& old (pi->preset_out ());
2202 if (!pi->set_preset_out (outs)) {
2203 return true; // no change, OK
2206 list<pair<ChanCount, ChanCount> > c = try_configure_processors_unlocked (n_inputs (), 0);
2209 pi->set_preset_out (old);
2212 configure_processors_unlocked (0, &lm);
2215 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
2216 _session.set_dirty ();
2221 Route::reset_plugin_insert (boost::shared_ptr<Processor> proc)
2224 return customize_plugin_insert (proc, 0, unused, unused);
2228 Route::customize_plugin_insert (boost::shared_ptr<Processor> proc, uint32_t count, ChanCount outs, ChanCount sinks)
2230 boost::shared_ptr<PluginInsert> pi;
2231 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(proc)) == 0) {
2236 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
2237 ProcessorList::iterator i = find (_processors.begin(), _processors.end(), proc);
2238 if (i == _processors.end ()) {
2244 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
2245 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
2247 bool old_cust = pi->custom_cfg ();
2248 uint32_t old_cnt = pi->get_count ();
2249 ChanCount old_chan = pi->output_streams ();
2250 ChanCount old_sinks = pi->natural_input_streams ();
2253 pi->set_custom_cfg (false);
2255 pi->set_custom_cfg (true);
2256 pi->set_count (count);
2257 pi->set_outputs (outs);
2258 pi->set_sinks (sinks);
2261 list<pair<ChanCount, ChanCount> > c = try_configure_processors_unlocked (n_inputs (), 0);
2265 pi->set_count (old_cnt);
2266 pi->set_sinks (old_sinks);
2267 pi->set_outputs (old_chan);
2268 pi->set_custom_cfg (old_cust);
2272 configure_processors_unlocked (0, &lm);
2275 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
2276 _session.set_dirty ();
2281 Route::set_strict_io (const bool enable)
2283 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
2285 if (_strict_io != enable) {
2286 _strict_io = enable;
2287 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
2288 for (ProcessorList::iterator p = _processors.begin(); p != _processors.end(); ++p) {
2289 boost::shared_ptr<PluginInsert> pi;
2290 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(*p)) != 0) {
2291 pi->set_strict_io (_strict_io);
2295 list<pair<ChanCount, ChanCount> > c = try_configure_processors_unlocked (n_inputs (), 0);
2299 _strict_io = !enable; // restore old value
2300 for (ProcessorList::iterator p = _processors.begin(); p != _processors.end(); ++p) {
2301 boost::shared_ptr<PluginInsert> pi;
2302 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(*p)) != 0) {
2303 pi->set_strict_io (_strict_io);
2310 configure_processors (0);
2313 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
2314 _session.set_dirty ();
2326 Route::get_template()
2328 return state(false);
2332 Route::state(bool full_state)
2334 if (!_session._template_state_dir.empty()) {
2335 foreach_processor (sigc::bind (sigc::mem_fun (*this, &Route::set_plugin_state_dir), _session._template_state_dir));
2338 XMLNode *node = new XMLNode("Route");
2339 ProcessorList::iterator i;
2341 node->set_property (X_("id"), id ());
2342 node->set_property (X_("name"), name());
2343 node->set_property (X_("default-type"), _default_type);
2344 node->set_property (X_("strict-io"), _strict_io);
2346 node->add_child_nocopy (_presentation_info.get_state());
2348 node->set_property (X_("active"), _active);
2349 node->set_property (X_("denormal-protection"), _denormal_protection);
2350 node->set_property (X_("meter-point"), _meter_point);
2351 node->set_property (X_("disk-io-point"), _disk_io_point);
2353 node->set_property (X_("meter-type"), _meter_type);
2356 node->set_property (X_("route-group"), _route_group->name());
2359 node->add_child_nocopy (_solo_control->get_state ());
2360 node->add_child_nocopy (_solo_isolate_control->get_state ());
2361 node->add_child_nocopy (_solo_safe_control->get_state ());
2363 node->add_child_nocopy (_input->state (full_state));
2364 node->add_child_nocopy (_output->state (full_state));
2365 node->add_child_nocopy (_mute_master->get_state ());
2367 node->add_child_nocopy (_mute_control->get_state ());
2368 node->add_child_nocopy (_phase_control->get_state ());
2371 node->add_child_nocopy (Automatable::get_automation_xml_state ());
2374 if (_comment.length()) {
2375 XMLNode *cmt = node->add_child ("Comment");
2376 cmt->add_content (_comment);
2380 node->add_child_nocopy (_pannable->state (full_state));
2384 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
2385 for (i = _processors.begin(); i != _processors.end(); ++i) {
2387 /* template save: do not include internal sends functioning as
2388 aux sends because the chance of the target ID
2389 in the session where this template is used
2392 similarly, do not save listen sends which connect to
2393 the monitor section, because these will always be
2396 boost::shared_ptr<InternalSend> is;
2398 if ((is = boost::dynamic_pointer_cast<InternalSend> (*i)) != 0) {
2399 if (is->role() == Delivery::Listen) {
2404 node->add_child_nocopy((*i)->state (full_state));
2409 node->add_child_copy (*_extra_xml);
2412 if (_custom_meter_position_noted) {
2413 boost::shared_ptr<Processor> after = _processor_after_last_custom_meter.lock ();
2415 node->set_property (X_("processor-after-last-custom-meter"), after->id());
2419 if (!_session._template_state_dir.empty()) {
2420 foreach_processor (sigc::bind (sigc::mem_fun (*this, &Route::set_plugin_state_dir), ""));
2423 node->add_child_copy (Slavable::get_state());
2429 Route::set_state (const XMLNode& node, int version)
2431 if (version < 3000) {
2432 return set_state_2X (node, version);
2436 XMLNodeConstIterator niter;
2439 if (node.name() != "Route"){
2440 error << string_compose(_("Bad node sent to Route::set_state() [%1]"), node.name()) << endmsg;
2444 std::string route_name;
2445 if (node.get_property (X_("name"), route_name)) {
2446 Route::set_name (route_name);
2450 _initial_io_setup = true;
2452 Stripable::set_state (node, version);
2454 node.get_property (X_("strict-io"), _strict_io);
2457 /* monitor bus does not get a panner, but if (re)created
2458 via XML, it will already have one by the time we
2459 call ::set_state(). so ... remove it.
2464 /* add all processors (except amp, which is always present) */
2466 nlist = node.children();
2467 XMLNode processor_state (X_("processor_state"));
2469 Stateful::save_extra_xml (node);
2471 for (niter = nlist.begin(); niter != nlist.end(); ++niter){
2475 if (child->name() == IO::state_node_name) {
2476 std::string direction;
2477 if (!child->get_property (X_("direction"), direction)) {
2481 if (direction == "Input") {
2482 _input->set_state (*child, version);
2483 } else if (direction == "Output") {
2484 _output->set_state (*child, version);
2487 } else if (child->name() == X_("Processor")) {
2488 processor_state.add_child_copy (*child);
2489 } else if (child->name() == X_("Pannable")) {
2491 _pannable->set_state (*child, version);
2493 warning << string_compose (_("Pannable state found for route (%1) without a panner!"), name()) << endmsg;
2495 } else if (child->name() == Slavable::xml_node_name) {
2496 Slavable::set_state (*child, version);
2501 if (node.get_property (X_("meter-point"), mp)) {
2502 set_meter_point (mp, true);
2504 _meter->set_display_to_user (_meter_point == MeterCustom);
2509 if (node.get_property (X_("disk-io-point"), diop)) {
2511 _disk_writer->set_display_to_user (diop == DiskIOCustom);
2514 _disk_reader->set_display_to_user (diop == DiskIOCustom);
2516 set_disk_io_point (diop);
2519 node.get_property (X_("meter-type"), _meter_type);
2521 _initial_io_setup = false;
2523 set_processor_state (processor_state);
2525 // this looks up the internal instrument in processors
2526 reset_instrument_info();
2528 bool denormal_protection;
2529 if (node.get_property (X_("denormal-protection"), denormal_protection)) {
2530 set_denormal_protection (denormal_protection);
2533 /* convert old 3001 state */
2534 std::string phase_invert_str;
2535 if (node.get_property (X_("phase-invert"), phase_invert_str)) {
2536 _phase_control->set_phase_invert (boost::dynamic_bitset<> (phase_invert_str));
2540 if (node.get_property (X_("active"), is_active)) {
2541 set_active (is_active, this);
2544 std::string id_string;
2545 if (node.get_property (X_("processor-after-last-custom-meter"), id_string)) {
2546 PBD::ID id (id_string);
2547 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
2548 ProcessorList::const_iterator i = _processors.begin ();
2549 while (i != _processors.end() && (*i)->id() != id) {
2553 if (i != _processors.end ()) {
2554 _processor_after_last_custom_meter = *i;
2555 _custom_meter_position_noted = true;
2559 for (niter = nlist.begin(); niter != nlist.end(); ++niter){
2562 if (child->name() == X_("Comment")) {
2564 /* XXX this is a terrible API design in libxml++ */
2566 XMLNode *cmt = *(child->children().begin());
2567 _comment = cmt->content();
2569 } else if (child->name() == Controllable::xml_node_name) {
2570 std::string control_name;
2571 if (!child->get_property (X_("name"), control_name)) {
2575 if (control_name == _solo_control->name()) {
2576 _solo_control->set_state (*child, version);
2577 } else if (control_name == _solo_safe_control->name()) {
2578 _solo_safe_control->set_state (*child, version);
2579 } else if (control_name == _solo_isolate_control->name()) {
2580 _solo_isolate_control->set_state (*child, version);
2581 } else if (control_name == _mute_control->name()) {
2582 _mute_control->set_state (*child, version);
2583 } else if (control_name == _phase_control->name()) {
2584 _phase_control->set_state (*child, version);
2586 Evoral::Parameter p = EventTypeMap::instance().from_symbol (control_name);
2587 if (p.type () >= MidiCCAutomation && p.type () < MidiSystemExclusiveAutomation) {
2588 boost::shared_ptr<AutomationControl> ac = automation_control (p, true);
2590 ac->set_state (*child, version);
2594 } else if (child->name() == MuteMaster::xml_node_name) {
2595 _mute_master->set_state (*child, version);
2597 } else if (child->name() == Automatable::xml_node_name) {
2598 set_automation_xml_state (*child, Evoral::Parameter(NullAutomation));
2606 Route::set_state_2X (const XMLNode& node, int version)
2610 XMLNodeConstIterator niter;
2612 XMLProperty const * prop;
2614 /* 2X things which still remain to be handled:
2620 if (node.name() != "Route") {
2621 error << string_compose(_("Bad node sent to Route::set_state() [%1]"), node.name()) << endmsg;
2625 Stripable::set_state (node, version);
2627 if ((prop = node.property (X_("denormal-protection"))) != 0) {
2628 set_denormal_protection (string_to<bool> (prop->value()));
2631 if ((prop = node.property (X_("muted"))) != 0) {
2634 bool muted = string_to<bool> (prop->value());
2640 if ((prop = node.property (X_("mute-affects-pre-fader"))) != 0) {
2642 if (string_to<bool> (prop->value())){
2643 mute_point = mute_point + "PreFader";
2648 if ((prop = node.property (X_("mute-affects-post-fader"))) != 0) {
2650 if (string_to<bool> (prop->value())){
2653 mute_point = mute_point + ",";
2656 mute_point = mute_point + "PostFader";
2661 if ((prop = node.property (X_("mute-affects-control-outs"))) != 0) {
2663 if (string_to<bool> (prop->value())){
2666 mute_point = mute_point + ",";
2669 mute_point = mute_point + "Listen";
2674 if ((prop = node.property (X_("mute-affects-main-outs"))) != 0) {
2676 if (string_to<bool> (prop->value())){
2679 mute_point = mute_point + ",";
2682 mute_point = mute_point + "Main";
2686 _mute_master->set_mute_points (mute_point);
2687 _mute_master->set_muted_by_self (true);
2691 if ((prop = node.property (X_("meter-point"))) != 0) {
2692 _meter_point = MeterPoint (string_2_enum (prop->value (), _meter_point));
2697 nlist = node.children ();
2698 for (niter = nlist.begin(); niter != nlist.end(); ++niter) {
2702 if (child->name() == IO::state_node_name) {
2704 /* there is a note in IO::set_state_2X() about why we have to call
2708 _input->set_state_2X (*child, version, true);
2709 _output->set_state_2X (*child, version, false);
2711 if ((prop = child->property (X_("name"))) != 0) {
2712 Route::set_name (prop->value ());
2717 if ((prop = child->property (X_("active"))) != 0) {
2718 bool yn = string_to<bool> (prop->value());
2719 _active = !yn; // force switch
2720 set_active (yn, this);
2723 if ((prop = child->property (X_("gain"))) != 0) {
2726 if (sscanf (prop->value().c_str(), "%f", &val) == 1) {
2727 _amp->gain_control()->set_value (val, Controllable::NoGroup);
2731 /* Set up Panners in the IO */
2732 XMLNodeList io_nlist = child->children ();
2734 XMLNodeConstIterator io_niter;
2737 for (io_niter = io_nlist.begin(); io_niter != io_nlist.end(); ++io_niter) {
2739 io_child = *io_niter;
2741 if (io_child->name() == X_("Panner")) {
2742 _main_outs->panner_shell()->set_state(*io_child, version);
2743 } else if (io_child->name() == X_("Automation")) {
2744 /* IO's automation is for the fader */
2745 _amp->set_automation_xml_state (*io_child, Evoral::Parameter (GainAutomation));
2751 XMLNodeList redirect_nodes;
2753 for (niter = nlist.begin(); niter != nlist.end(); ++niter){
2757 if (child->name() == X_("Send") || child->name() == X_("Insert")) {
2758 redirect_nodes.push_back(child);
2763 set_processor_state_2X (redirect_nodes, version);
2765 Stateful::save_extra_xml (node);
2767 for (niter = nlist.begin(); niter != nlist.end(); ++niter){
2770 if (child->name() == X_("Comment")) {
2772 /* XXX this is a terrible API design in libxml++ */
2774 XMLNode *cmt = *(child->children().begin());
2775 _comment = cmt->content();
2777 } else if (child->name() == Controllable::xml_node_name && (prop = child->property("name")) != 0) {
2778 if (prop->value() == X_("solo")) {
2779 _solo_control->set_state (*child, version);
2780 } else if (prop->value() == X_("mute")) {
2781 _mute_control->set_state (*child, version);
2791 Route::get_processor_state ()
2793 XMLNode* root = new XMLNode (X_("redirects"));
2794 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
2795 root->add_child_nocopy ((*i)->state (true));
2802 Route::set_processor_state_2X (XMLNodeList const & nList, int version)
2804 /* We don't bother removing existing processors not in nList, as this
2805 method will only be called when creating a Route from scratch, not
2806 for undo purposes. Just put processors in at the appropriate place
2810 for (XMLNodeConstIterator i = nList.begin(); i != nList.end(); ++i) {
2811 add_processor_from_xml_2X (**i, version);
2816 Route::set_processor_state (const XMLNode& node)
2818 const XMLNodeList &nlist = node.children();
2819 XMLNodeConstIterator niter;
2820 ProcessorList new_order;
2821 bool must_configure = false;
2823 for (niter = nlist.begin(); niter != nlist.end(); ++niter) {
2825 XMLProperty* prop = (*niter)->property ("type");
2827 if (prop->value() == "amp") {
2828 _amp->set_state (**niter, Stateful::current_state_version);
2829 new_order.push_back (_amp);
2830 } else if (prop->value() == "trim") {
2831 _trim->set_state (**niter, Stateful::current_state_version);
2832 new_order.push_back (_trim);
2833 } else if (prop->value() == "meter") {
2834 _meter->set_state (**niter, Stateful::current_state_version);
2835 new_order.push_back (_meter);
2836 } else if (prop->value() == "delay") {
2838 _delayline->set_state (**niter, Stateful::current_state_version);
2839 new_order.push_back (_delayline);
2841 } else if (prop->value() == "main-outs") {
2842 _main_outs->set_state (**niter, Stateful::current_state_version);
2843 } else if (prop->value() == "intreturn") {
2845 _intreturn.reset (new InternalReturn (_session));
2846 must_configure = true;
2848 _intreturn->set_state (**niter, Stateful::current_state_version);
2849 } else if (is_monitor() && prop->value() == "monitor") {
2850 if (!_monitor_control) {
2851 _monitor_control.reset (new MonitorProcessor (_session));
2852 must_configure = true;
2854 _monitor_control->set_state (**niter, Stateful::current_state_version);
2855 } else if (prop->value() == "capture") {
2856 /* CapturingProcessor should never be restored, it's always
2857 added explicitly when needed */
2858 } else if (prop->value() == "diskreader" && _disk_reader) {
2859 _disk_reader->set_state (**niter, Stateful::current_state_version);
2860 new_order.push_back (_disk_reader);
2861 } else if (prop->value() == "diskwriter" && _disk_writer) {
2862 _disk_writer->set_state (**niter, Stateful::current_state_version);
2863 new_order.push_back (_disk_writer);
2865 set_processor_state (**niter, prop, new_order, must_configure);
2869 ProcessorList old_list = _processors; // keep a copy
2871 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
2872 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
2873 /* re-assign _processors w/o process-lock.
2874 * if there's an IO-processor present in _processors but
2875 * not in new_order, it will be deleted and ~IO takes
2878 _processors = new_order;
2880 if (must_configure) {
2881 configure_processors_unlocked (0, &lm);
2884 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
2886 (*i)->set_owner (this);
2887 (*i)->ActiveChanged.connect_same_thread (*this, boost::bind (&Session::update_latency_compensation, &_session, false));
2889 boost::shared_ptr<PluginInsert> pi;
2891 if ((pi = boost::dynamic_pointer_cast<PluginInsert>(*i)) != 0) {
2892 if (pi->has_no_inputs ()) {
2893 _have_internal_generator = true;
2899 /* drop references w/o process-lock (I/O procs may re-take it in ~IO() */
2902 reset_instrument_info ();
2903 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
2904 set_processor_positions ();
2908 Route::set_processor_state (XMLNode const & node, XMLProperty const* prop, ProcessorList& new_order, bool& must_configure)
2910 ProcessorList::iterator o;
2912 for (o = _processors.begin(); o != _processors.end(); ++o) {
2913 XMLProperty const * id_prop = node.property(X_("id"));
2914 if (id_prop && (*o)->id() == id_prop->value()) {
2915 (*o)->set_state (node, Stateful::current_state_version);
2916 new_order.push_back (*o);
2921 // If the processor (node) is not on the route then create it
2923 if (o == _processors.end()) {
2925 boost::shared_ptr<Processor> processor;
2927 if (prop->value() == "intsend") {
2929 processor.reset (new InternalSend (_session, _pannable, _mute_master, boost::dynamic_pointer_cast<ARDOUR::Route>(shared_from_this()), boost::shared_ptr<Route>(), Delivery::Aux, true));
2931 } else if (prop->value() == "ladspa" || prop->value() == "Ladspa" ||
2932 prop->value() == "lv2" ||
2933 prop->value() == "windows-vst" ||
2934 prop->value() == "mac-vst" ||
2935 prop->value() == "lxvst" ||
2936 prop->value() == "luaproc" ||
2937 prop->value() == "audiounit") {
2939 if (_session.get_disable_all_loaded_plugins ()) {
2940 processor.reset (new UnknownProcessor (_session, node));
2942 processor.reset (new PluginInsert (_session));
2943 processor->set_owner (this);
2945 boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert>(processor);
2946 pi->set_strict_io (true);
2950 } else if (prop->value() == "port") {
2952 processor.reset (new PortInsert (_session, _pannable, _mute_master));
2954 } else if (prop->value() == "send") {
2956 processor.reset (new Send (_session, _pannable, _mute_master, Delivery::Send, true));
2957 boost::shared_ptr<Send> send = boost::dynamic_pointer_cast<Send> (processor);
2958 send->SelfDestruct.connect_same_thread (*this,
2959 boost::bind (&Route::processor_selfdestruct, this, boost::weak_ptr<Processor> (processor)));
2965 if (processor->set_state (node, Stateful::current_state_version) != 0) {
2966 /* This processor could not be configured. Turn it into a UnknownProcessor */
2967 processor.reset (new UnknownProcessor (_session, node));
2970 /* subscribe to Sidechain IO changes */
2971 boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert> (processor);
2972 if (pi && pi->has_sidechain ()) {
2973 pi->sidechain_input ()->changed.connect_same_thread (*this, boost::bind (&Route::sidechain_change_handler, this, _1, _2));
2976 /* we have to note the monitor send here, otherwise a new one will be created
2977 and the state of this one will be lost.
2979 boost::shared_ptr<InternalSend> isend = boost::dynamic_pointer_cast<InternalSend> (processor);
2980 if (isend && isend->role() == Delivery::Listen) {
2981 _monitor_send = isend;
2984 /* it doesn't matter if invisible processors are added here, as they
2985 will be sorted out by setup_invisible_processors () shortly.
2988 new_order.push_back (processor);
2989 must_configure = true;
2995 Route::curve_reallocate ()
2997 // _gain_automation_curve.finish_resize ();
2998 // _pan_automation_curve.finish_resize ();
3002 Route::silence (samplecnt_t nframes)
3004 Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
3009 silence_unlocked (nframes);
3013 Route::silence_unlocked (samplecnt_t nframes)
3015 /* Must be called with the processor lock held */
3017 const samplepos_t now = _session.transport_sample ();
3021 _output->silence (nframes);
3023 // update owned automated controllables
3024 automation_run (now, nframes);
3026 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
3027 boost::shared_ptr<PluginInsert> pi;
3029 if (!_active && (pi = boost::dynamic_pointer_cast<PluginInsert> (*i)) != 0) {
3030 /* evaluate automated automation controls */
3031 pi->automation_run (now, nframes);
3032 /* skip plugins, they don't need anything when we're not active */
3036 (*i)->silence (nframes, now);
3039 if (nframes == _session.get_block_size()) {
3046 Route::add_internal_return ()
3049 _intreturn.reset (new InternalReturn (_session));
3050 add_processor (_intreturn, PreFader);
3055 Route::add_send_to_internal_return (InternalSend* send)
3057 Glib::Threads::RWLock::ReaderLock rm (_processor_lock);
3059 for (ProcessorList::const_iterator x = _processors.begin(); x != _processors.end(); ++x) {
3060 boost::shared_ptr<InternalReturn> d = boost::dynamic_pointer_cast<InternalReturn>(*x);
3063 return d->add_send (send);
3069 Route::remove_send_from_internal_return (InternalSend* send)
3071 Glib::Threads::RWLock::ReaderLock rm (_processor_lock);
3073 for (ProcessorList::const_iterator x = _processors.begin(); x != _processors.end(); ++x) {
3074 boost::shared_ptr<InternalReturn> d = boost::dynamic_pointer_cast<InternalReturn>(*x);
3077 return d->remove_send (send);
3083 Route::enable_monitor_send ()
3085 /* Caller must hold process lock */
3086 assert (!AudioEngine::instance()->process_lock().trylock());
3088 /* master never sends to monitor section via the normal mechanism */
3089 assert (!is_master ());
3090 assert (!is_monitor ());
3092 /* make sure we have one */
3093 if (!_monitor_send) {
3094 _monitor_send.reset (new InternalSend (_session, _pannable, _mute_master, boost::dynamic_pointer_cast<ARDOUR::Route>(shared_from_this()), _session.monitor_out(), Delivery::Listen));
3095 _monitor_send->set_display_to_user (false);
3099 configure_processors (0);
3102 /** Add an aux send to a route.
3103 * @param route route to send to.
3104 * @param before Processor to insert before, or 0 to insert at the end.
3107 Route::add_aux_send (boost::shared_ptr<Route> route, boost::shared_ptr<Processor> before)
3109 assert (route != _session.monitor_out ());
3112 Glib::Threads::RWLock::ReaderLock rm (_processor_lock);
3114 for (ProcessorList::iterator x = _processors.begin(); x != _processors.end(); ++x) {
3116 boost::shared_ptr<InternalSend> d = boost::dynamic_pointer_cast<InternalSend> (*x);
3118 if (d && d->target_route() == route) {
3119 /* already listening via the specified IO: do nothing */
3127 boost::shared_ptr<InternalSend> listener;
3130 Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
3131 listener.reset (new InternalSend (_session, _pannable, _mute_master, boost::dynamic_pointer_cast<ARDOUR::Route>(shared_from_this()), route, Delivery::Aux));
3134 add_processor (listener, before);
3136 } catch (failed_constructor& err) {
3144 Route::remove_aux_or_listen (boost::shared_ptr<Route> route)
3146 ProcessorStreams err;
3147 ProcessorList::iterator tmp;
3150 Glib::Threads::RWLock::ReaderLock rl(_processor_lock);
3152 /* have to do this early because otherwise processor reconfig
3153 * will put _monitor_send back in the list
3156 if (route == _session.monitor_out()) {
3157 _monitor_send.reset ();
3161 for (ProcessorList::iterator x = _processors.begin(); x != _processors.end(); ++x) {
3163 boost::shared_ptr<InternalSend> d = boost::dynamic_pointer_cast<InternalSend>(*x);
3165 if (d && d->target_route() == route) {
3167 if (remove_processor (*x, &err, false) > 0) {
3173 /* list could have been demolished while we dropped the lock
3176 if (_session.engine().connected()) {
3177 /* i/o processors cannot be removed if the engine is not running
3178 * so don't live-loop in case the engine is N/A or dies
3188 Route::set_comment (string cmt, void *src)
3192 _session.set_dirty ();
3196 Route::add_fed_by (boost::shared_ptr<Route> other, bool via_sends_only)
3198 FeedRecord fr (other, via_sends_only);
3200 pair<FedBy::iterator,bool> result = _fed_by.insert (fr);
3202 if (!result.second) {
3204 /* already a record for "other" - make sure sends-only information is correct */
3205 if (!via_sends_only && result.first->sends_only) {
3206 FeedRecord* frp = const_cast<FeedRecord*>(&(*result.first));
3207 frp->sends_only = false;
3211 return result.second;
3215 Route::clear_fed_by ()
3221 Route::feeds (boost::shared_ptr<Route> other, bool* via_sends_only)
3223 const FedBy& fed_by (other->fed_by());
3225 for (FedBy::const_iterator f = fed_by.begin(); f != fed_by.end(); ++f) {
3226 boost::shared_ptr<Route> sr = f->r.lock();
3228 if (sr && (sr.get() == this)) {
3230 if (via_sends_only) {
3231 *via_sends_only = f->sends_only;
3242 Route::all_inputs () const
3244 /* TODO, if this works as expected,
3245 * cache the IOVector and maintain it via
3246 * input_change_handler(), sidechain_change_handler() etc
3249 ios.push_back (_input);
3251 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
3252 for (ProcessorList::const_iterator r = _processors.begin(); r != _processors.end(); ++r) {
3254 boost::shared_ptr<IOProcessor> iop = boost::dynamic_pointer_cast<IOProcessor>(*r);
3255 boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert>(*r);
3258 iop = pi->sidechain();
3261 if (iop != 0 && iop->input()) {
3262 ios.push_back (iop->input());
3269 Route::all_outputs () const
3272 // _output is included via Delivery
3273 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
3274 for (ProcessorList::const_iterator r = _processors.begin(); r != _processors.end(); ++r) {
3275 boost::shared_ptr<IOProcessor> iop = boost::dynamic_pointer_cast<IOProcessor>(*r);
3276 if (iop != 0 && iop->output()) {
3277 ios.push_back (iop->output());
3284 Route::direct_feeds_according_to_reality (boost::shared_ptr<Route> other, bool* via_send_only)
3286 DEBUG_TRACE (DEBUG::Graph, string_compose ("Feeds? %1\n", _name));
3287 if (other->all_inputs().fed_by (_output)) {
3288 DEBUG_TRACE (DEBUG::Graph, string_compose ("\tdirect FEEDS %2\n", other->name()));
3289 if (via_send_only) {
3290 *via_send_only = false;
3296 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
3298 for (ProcessorList::iterator r = _processors.begin(); r != _processors.end(); ++r) {
3300 boost::shared_ptr<IOProcessor> iop = boost::dynamic_pointer_cast<IOProcessor>(*r);
3301 boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert>(*r);
3304 iop = pi->sidechain();
3308 boost::shared_ptr<const IO> iop_out = iop->output();
3309 if (other.get() == this && iop_out && iop->input() && iop_out->connected_to (iop->input())) {
3310 // TODO this needs a delaylines in the Insert to align connections (!)
3311 DEBUG_TRACE (DEBUG::Graph, string_compose ("\tIOP %1 does feed its own return (%2)\n", iop->name(), other->name()));
3314 if ((iop_out && other->all_inputs().fed_by (iop_out)) || iop->feeds (other)) {
3315 DEBUG_TRACE (DEBUG::Graph, string_compose ("\tIOP %1 does feed %2\n", iop->name(), other->name()));
3316 if (via_send_only) {
3317 *via_send_only = true;
3321 DEBUG_TRACE (DEBUG::Graph, string_compose ("\tIOP %1 does NOT feed %2\n", iop->name(), other->name()));
3324 DEBUG_TRACE (DEBUG::Graph, string_compose ("\tPROC %1 is not an IOP\n", (*r)->name()));
3329 DEBUG_TRACE (DEBUG::Graph, string_compose ("\tdoes NOT feed %1\n", other->name()));
3334 Route::direct_feeds_according_to_graph (boost::shared_ptr<Route> other, bool* via_send_only)
3336 return _session._current_route_graph.has (boost::dynamic_pointer_cast<Route> (shared_from_this ()), other, via_send_only);
3340 Route::feeds_according_to_graph (boost::shared_ptr<Route> other)
3342 return _session._current_route_graph.feeds (boost::dynamic_pointer_cast<Route> (shared_from_this ()), other);
3345 /** Called from the (non-realtime) butler thread when the transport is stopped */
3347 Route::non_realtime_transport_stop (samplepos_t now, bool flush)
3349 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
3351 Automatable::non_realtime_transport_stop (now, flush);
3353 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
3355 if (!_have_internal_generator && (Config->get_plugins_stop_with_transport() && flush)) {
3359 (*i)->non_realtime_transport_stop (now, flush);
3364 Route::input_change_handler (IOChange change, void * /*src*/)
3366 if ((change.type & IOChange::ConfigurationChanged)) {
3367 /* This is called with the process lock held if change
3368 contains ConfigurationChanged
3370 configure_processors (0);
3371 _phase_control->resize (_input->n_ports().n_audio ());
3372 io_changed (); /* EMIT SIGNAL */
3375 if (_solo_control->soloed_by_others_upstream() || _solo_isolate_control->solo_isolated_by_upstream()) {
3378 boost::shared_ptr<RouteList> routes = _session.get_routes ();
3379 if (_input->connected()) {
3380 for (RouteList::iterator i = routes->begin(); i != routes->end(); ++i) {
3381 if ((*i).get() == this || (*i)->is_master() || (*i)->is_monitor() || (*i)->is_auditioner()) {
3385 bool does_feed = (*i)->direct_feeds_according_to_reality (boost::dynamic_pointer_cast<Route> (shared_from_this()), &sends_only);
3386 if (does_feed && !sends_only) {
3387 if ((*i)->soloed()) {
3390 if ((*i)->solo_isolate_control()->solo_isolated()) {
3397 int delta = sbou - _solo_control->soloed_by_others_upstream();
3398 int idelta = ibou - _solo_isolate_control->solo_isolated_by_upstream();
3401 PBD::warning << string_compose (
3402 _("Invalid Solo-Isolate propagation: from:%1 new:%2 - old:%3 = delta:%4"),
3403 _name, ibou, _solo_isolate_control->solo_isolated_by_upstream(), idelta)
3408 if (_solo_control->soloed_by_others_upstream()) {
3409 // ignore new connections (they're not propagated)
3411 _solo_control->mod_solo_by_others_upstream (delta);
3415 if (_solo_isolate_control->solo_isolated_by_upstream()) {
3416 // solo-isolate currently only propagates downstream
3418 _solo_isolate_control->mod_solo_isolated_by_upstream (1);
3420 //_solo_isolated_by_upstream = ibou;
3423 // Session::route_solo_changed does not propagate indirect solo-changes
3424 // propagate downstream to tracks
3425 for (RouteList::iterator i = routes->begin(); i != routes->end(); ++i) {
3426 if ((*i).get() == this || (*i)->is_master() || (*i)->is_monitor() || (*i)->is_auditioner()) {
3430 bool does_feed = feeds (*i, &sends_only);
3431 if (delta <= 0 && does_feed && !sends_only) {
3432 (*i)->solo_control()->mod_solo_by_others_upstream (delta);
3435 if (idelta < 0 && does_feed && !sends_only) {
3436 (*i)->solo_isolate_control()->mod_solo_isolated_by_upstream (-1);
3443 Route::output_change_handler (IOChange change, void * /*src*/)
3445 if (_initial_io_setup) {
3449 if ((change.type & IOChange::ConfigurationChanged)) {
3450 /* This is called with the process lock held if change
3451 contains ConfigurationChanged
3453 configure_processors (0);
3456 _session.reset_monitor_section();
3459 io_changed (); /* EMIT SIGNAL */
3462 if ((change.type & IOChange::ConnectionsChanged)) {
3464 /* do this ONLY if connections have changed. Configuration
3465 * changes do not, by themselves alter solo upstream or
3466 * downstream status.
3469 if (_solo_control->soloed_by_others_downstream()) {
3471 /* checking all all downstream routes for
3472 * explicit of implict solo is a rather drastic measure,
3473 * ideally the input_change_handler() of the other route
3474 * would propagate the change to us.
3476 boost::shared_ptr<RouteList> routes = _session.get_routes ();
3477 if (_output->connected()) {
3478 for (RouteList::iterator i = routes->begin(); i != routes->end(); ++i) {
3479 if ((*i).get() == this || (*i)->is_master() || (*i)->is_monitor() || (*i)->is_auditioner()) {
3483 bool does_feed = direct_feeds_according_to_reality (*i, &sends_only);
3484 if (does_feed && !sends_only) {
3485 if ((*i)->soloed()) {
3493 int delta = sbod - _solo_control->soloed_by_others_downstream();
3495 // do not allow new connections to change implicit solo (no propagation)
3496 _solo_control->mod_solo_by_others_downstream (delta);
3497 // Session::route_solo_changed() does not propagate indirect solo-changes
3498 // propagate upstream to tracks
3499 boost::shared_ptr<Route> shared_this = boost::dynamic_pointer_cast<Route> (shared_from_this());
3500 for (RouteList::iterator i = routes->begin(); i != routes->end(); ++i) {
3501 if ((*i).get() == this || !can_solo()) {
3505 bool does_feed = (*i)->feeds (shared_this, &sends_only);
3506 if (delta != 0 && does_feed && !sends_only) {
3507 (*i)->solo_control()->mod_solo_by_others_downstream (delta);
3517 Route::sidechain_change_handler (IOChange change, void* src)
3519 if (_initial_io_setup || _in_sidechain_setup) {
3523 input_change_handler (change, src);
3527 Route::pans_required () const
3529 if (n_outputs().n_audio() < 2) {
3533 return max (n_inputs ().n_audio(), processor_max_streams.n_audio());
3537 Route::flush_processor_buffers_locked (samplecnt_t nframes)
3539 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
3540 boost::shared_ptr<Delivery> d = boost::dynamic_pointer_cast<Delivery> (*i);
3542 d->flush_buffers (nframes);
3544 boost::shared_ptr<PortInsert> p = boost::dynamic_pointer_cast<PortInsert> (*i);
3546 p->flush_buffers (nframes);
3553 Route::no_roll (pframes_t nframes, samplepos_t start_sample, samplepos_t end_sample, bool session_state_changing)
3555 Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
3562 silence_unlocked (nframes);
3566 if (session_state_changing) {
3567 if (_session.transport_speed() != 0.0f) {
3568 /* we're rolling but some state is changing (e.g. our diskstream contents)
3569 so we cannot use them. Be silent till this is over.
3571 XXX note the absurdity of ::no_roll() being called when we ARE rolling!
3573 silence_unlocked (nframes);
3576 /* we're really not rolling, so we're either delivery silence or actually
3577 monitoring, both of which are safe to do while session_state_changing is true.
3581 BufferSet& bufs = _session.get_route_buffers (n_process_buffers());
3583 fill_buffers_with_input (bufs, _input, nframes);
3585 if (_meter_point == MeterInput) {
3586 _meter->run (bufs, start_sample, end_sample, 0.0, nframes, true);
3589 passthru (bufs, start_sample, end_sample, nframes, 0, true);
3591 flush_processor_buffers_locked (nframes);
3597 Route::roll (pframes_t nframes, samplepos_t start_sample, samplepos_t end_sample, int declick, bool& need_butler)
3599 Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
3606 silence_unlocked (nframes);
3607 if (_meter_point == MeterInput && ((_monitoring_control->monitoring_choice() & MonitorInput) || (!_disk_writer || _disk_writer->record_enabled()))) {
3615 BufferSet& bufs = _session.get_route_buffers (n_process_buffers ());
3617 fill_buffers_with_input (bufs, _input, nframes);
3619 /* filter captured data before meter sees it */
3620 filter_input (bufs);
3622 if (_meter_point == MeterInput &&
3623 ((_monitoring_control->monitoring_choice() & MonitorInput) || (_disk_writer && _disk_writer->record_enabled()))) {
3624 _meter->run (bufs, start_sample, end_sample, 1.0 /*speed()*/, nframes, true);
3627 passthru (bufs, start_sample, end_sample, nframes, declick, (!_disk_writer || !_disk_writer->record_enabled()) && _session.transport_rolling());
3629 if ((_disk_reader && _disk_reader->need_butler()) || (_disk_writer && _disk_writer->need_butler())) {
3633 flush_processor_buffers_locked (nframes);
3639 Route::silent_roll (pframes_t nframes, samplepos_t /*start_sample*/, samplepos_t /*end_sample*/, bool& /* need_butler */)
3642 flush_processor_buffers_locked (nframes);
3647 Route::flush_processors ()
3649 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
3651 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
3657 __attribute__((annotate("realtime")))
3660 Route::apply_processor_changes_rt ()
3662 int emissions = EmitNone;
3664 if (_pending_meter_point != _meter_point) {
3665 Glib::Threads::RWLock::WriterLock pwl (_processor_lock, Glib::Threads::TRY_LOCK);
3667 /* meters always have buffers for 'processor_max_streams'
3668 * they can be re-positioned without re-allocation */
3669 if (set_meter_point_unlocked()) {
3670 emissions |= EmitMeterChanged | EmitMeterVisibilityChange;;
3672 emissions |= EmitMeterChanged;
3677 bool changed = false;
3679 if (g_atomic_int_get (&_pending_process_reorder)) {
3680 Glib::Threads::RWLock::WriterLock pwl (_processor_lock, Glib::Threads::TRY_LOCK);
3682 apply_processor_order (_pending_processor_order);
3683 setup_invisible_processors ();
3685 g_atomic_int_set (&_pending_process_reorder, 0);
3686 emissions |= EmitRtProcessorChange;
3690 set_processor_positions ();
3691 /* update processor input/output latency
3692 * (total signal_latency does not change)
3694 update_signal_latency (true);
3696 if (emissions != 0) {
3697 g_atomic_int_set (&_pending_signals, emissions);
3700 return (!selfdestruct_sequence.empty ());
3704 Route::emit_pending_signals ()
3706 int sig = g_atomic_int_and (&_pending_signals, 0);
3707 if (sig & EmitMeterChanged) {
3708 _meter->emit_configuration_changed();
3709 meter_change (); /* EMIT SIGNAL */
3710 if (sig & EmitMeterVisibilityChange) {
3711 processors_changed (RouteProcessorChange (RouteProcessorChange::MeterPointChange, true)); /* EMIT SIGNAL */
3713 processors_changed (RouteProcessorChange (RouteProcessorChange::MeterPointChange, false)); /* EMIT SIGNAL */
3716 if (sig & EmitRtProcessorChange) {
3717 processors_changed (RouteProcessorChange (RouteProcessorChange::RealTimeChange)); /* EMIT SIGNAL */
3720 /* this would be a job for the butler.
3721 * Conceptually we should not take processe/processor locks here.
3722 * OTOH its more efficient (less overhead for summoning the butler and
3723 * telling her what do do) and signal emission is called
3724 * directly after the process callback, which decreases the chance
3725 * of x-runs when taking the locks.
3727 while (!selfdestruct_sequence.empty ()) {
3728 Glib::Threads::Mutex::Lock lx (selfdestruct_lock);
3729 if (selfdestruct_sequence.empty ()) { break; } // re-check with lock
3730 boost::shared_ptr<Processor> proc = selfdestruct_sequence.back ().lock ();
3731 selfdestruct_sequence.pop_back ();
3734 remove_processor (proc);
3740 Route::set_meter_point (MeterPoint p, bool force)
3742 if (_pending_meter_point == p && !force) {
3746 if (force || !AudioEngine::instance()->running()) {
3747 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
3748 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
3749 _pending_meter_point = p;
3750 _meter->emit_configuration_changed();
3751 meter_change (); /* EMIT SIGNAL */
3752 if (set_meter_point_unlocked()) {
3753 processors_changed (RouteProcessorChange (RouteProcessorChange::MeterPointChange, true)); /* EMIT SIGNAL */
3755 processors_changed (RouteProcessorChange (RouteProcessorChange::MeterPointChange, false)); /* EMIT SIGNAL */
3758 _pending_meter_point = p;
3764 __attribute__((annotate("realtime")))
3767 Route::set_meter_point_unlocked ()
3770 /* Caller must hold process and processor write lock */
3771 assert (!AudioEngine::instance()->process_lock().trylock());
3772 Glib::Threads::RWLock::WriterLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
3773 assert (!lm.locked ());
3776 _meter_point = _pending_meter_point;
3778 bool meter_was_visible_to_user = _meter->display_to_user ();
3780 if (!_custom_meter_position_noted) {
3781 maybe_note_meter_position ();
3784 if (_meter_point != MeterCustom) {
3786 _meter->set_display_to_user (false);
3788 setup_invisible_processors ();
3791 _meter->set_display_to_user (true);
3793 /* If we have a previous position for the custom meter, try to put it there */
3794 boost::shared_ptr<Processor> after = _processor_after_last_custom_meter.lock ();
3796 ProcessorList::iterator i = find (_processors.begin(), _processors.end(), after);
3797 if (i != _processors.end ()) {
3798 _processors.remove (_meter);
3799 _processors.insert (i, _meter);
3801 } else {// at end, right before the mains_out/panner
3802 _processors.remove (_meter);
3803 ProcessorList::iterator main = _processors.end();
3804 _processors.insert (--main, _meter);
3808 /* Set up the meter for its new position */
3810 ProcessorList::iterator loc = find (_processors.begin(), _processors.end(), _meter);
3814 if (loc == _processors.begin()) {
3815 m_in = _input->n_ports();
3817 ProcessorList::iterator before = loc;
3819 m_in = (*before)->output_streams ();
3822 _meter->reflect_inputs (m_in);
3824 /* we do not need to reconfigure the processors, because the meter
3825 (a) is always ready to handle processor_max_streams
3826 (b) is always an N-in/N-out processor, and thus moving
3827 it doesn't require any changes to the other processors.
3830 /* these should really be done after releasing the lock
3831 * but all those signals are subscribed to with gui_thread()
3834 return (_meter->display_to_user() != meter_was_visible_to_user);
3838 Route::listen_position_changed ()
3841 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
3842 Glib::Threads::RWLock::WriterLock lm (_processor_lock);
3843 ProcessorState pstate (this);
3845 if (configure_processors_unlocked (0, &lm)) {
3846 DEBUG_TRACE (DEBUG::Processors, "---- CONFIGURATION FAILED.\n");
3848 configure_processors_unlocked (0, &lm); // it worked before we tried to add it ...
3853 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
3854 _session.set_dirty ();
3857 boost::shared_ptr<CapturingProcessor>
3858 Route::add_export_point()
3860 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
3861 if (!_capturing_processor) {
3863 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
3864 Glib::Threads::RWLock::WriterLock lw (_processor_lock);
3866 // this aligns all tracks; but not tracks + busses
3867 samplecnt_t latency = _session.worst_track_out_latency (); // FIXME
3868 assert (latency >= _initial_delay);
3869 _capturing_processor.reset (new CapturingProcessor (_session, latency - _initial_delay));
3870 _capturing_processor->activate ();
3872 configure_processors_unlocked (0, &lw);
3876 return _capturing_processor;
3880 Route::update_signal_latency (bool set_initial_delay)
3882 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
3884 samplecnt_t l_in = _input->latency ();
3885 samplecnt_t l_out = _output->user_latency();
3887 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
3888 if ((*i)->active ()) {
3889 l_in += (*i)->signal_latency ();
3891 (*i)->set_input_latency (l_in);
3894 for (ProcessorList::reverse_iterator i = _processors.rbegin(); i != _processors.rend(); ++i) {
3895 (*i)->set_output_latency (l_out);
3896 if ((*i)->active ()) {
3897 l_out += (*i)->signal_latency ();
3901 DEBUG_TRACE (DEBUG::Latency, string_compose ("%1: internal signal latency = %2\n", _name, l_out));
3903 _signal_latency = l_out;
3907 if (set_initial_delay) {
3908 /* see also Session::post_playback_latency() */
3909 set_latency_compensation (_session.worst_track_latency () + _session.worst_track_out_latency () - output ()->latency ());
3912 if (_signal_latency != l_out) {
3913 signal_latency_changed (); /* EMIT SIGNAL */
3916 return _signal_latency;
3920 Route::set_user_latency (samplecnt_t nframes)
3922 _output->set_user_latency (nframes);
3923 _session.update_latency_compensation ();
3927 Route::set_latency_compensation (samplecnt_t longest_session_latency)
3929 samplecnt_t old = _initial_delay;
3930 assert (!_disk_reader || _disk_reader->output_latency () <= _signal_latency);
3932 if (_disk_reader && _disk_reader->output_latency () < longest_session_latency) {
3933 _initial_delay = longest_session_latency - _disk_reader->output_latency ();
3938 DEBUG_TRACE (DEBUG::Latency, string_compose (
3939 "%1: compensate for maximum latency of %2,"
3940 "given own latency of %3, using initial delay of %4\n",
3941 name(), longest_session_latency, _signal_latency, _initial_delay));
3943 if (_initial_delay != old) {
3944 initial_delay_changed (); /* EMIT SIGNAL */
3950 Route::set_block_size (pframes_t nframes)
3952 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
3953 (*i)->set_block_size (nframes);
3956 _session.ensure_buffers (n_process_buffers ());
3960 Route::protect_automation ()
3962 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i)
3963 (*i)->protect_automation();
3966 /** @param declick 1 to set a pending declick fade-in,
3967 * -1 to set a pending declick fade-out
3970 Route::set_pending_declick (int declick)
3973 /* this call is not allowed to turn off a pending declick */
3975 _pending_declick = declick;
3978 _pending_declick = 0;
3982 /** Shift automation forwards from a particular place, thereby inserting time.
3983 * Adds undo commands for any shifts that are performed.
3985 * @param pos Position to start shifting from.
3986 * @param samples Amount to shift forwards by.
3990 Route::shift (samplepos_t pos, samplecnt_t samples)
3992 /* gain automation */
3994 boost::shared_ptr<AutomationControl> gc = _amp->gain_control();
3996 XMLNode &before = gc->alist()->get_state ();
3997 gc->alist()->shift (pos, samples);
3998 XMLNode &after = gc->alist()->get_state ();
3999 _session.add_command (new MementoCommand<AutomationList> (*gc->alist().get(), &before, &after));
4002 /* gain automation */
4004 boost::shared_ptr<AutomationControl> gc = _trim->gain_control();
4006 XMLNode &before = gc->alist()->get_state ();
4007 gc->alist()->shift (pos, samples);
4008 XMLNode &after = gc->alist()->get_state ();
4009 _session.add_command (new MementoCommand<AutomationList> (*gc->alist().get(), &before, &after));
4012 // TODO mute automation ??
4014 /* pan automation */
4016 ControlSet::Controls& c (_pannable->controls());
4018 for (ControlSet::Controls::const_iterator ci = c.begin(); ci != c.end(); ++ci) {
4019 boost::shared_ptr<AutomationControl> pc = boost::dynamic_pointer_cast<AutomationControl> (ci->second);
4021 boost::shared_ptr<AutomationList> al = pc->alist();
4022 XMLNode& before = al->get_state ();
4023 al->shift (pos, samples);
4024 XMLNode& after = al->get_state ();
4025 _session.add_command (new MementoCommand<AutomationList> (*al.get(), &before, &after));
4030 /* redirect automation */
4032 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
4033 for (ProcessorList::iterator i = _processors.begin (); i != _processors.end (); ++i) {
4035 set<Evoral::Parameter> parameters = (*i)->what_can_be_automated();
4037 for (set<Evoral::Parameter>::const_iterator p = parameters.begin (); p != parameters.end (); ++p) {
4038 boost::shared_ptr<AutomationControl> ac = (*i)->automation_control (*p);
4040 boost::shared_ptr<AutomationList> al = ac->alist();
4041 XMLNode &before = al->get_state ();
4042 al->shift (pos, samples);
4043 XMLNode &after = al->get_state ();
4044 _session.add_command (new MementoCommand<AutomationList> (*al.get(), &before, &after));
4052 Route::set_plugin_state_dir (boost::weak_ptr<Processor> p, const std::string& d)
4054 boost::shared_ptr<Processor> processor (p.lock ());
4055 boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert> (processor);
4059 pi->set_state_dir (d);
4063 Route::save_as_template (const string& path, const string& name, const string& description)
4065 std::string state_dir = path.substr (0, path.find_last_of ('.')); // strip template_suffix
4066 PBD::Unwinder<std::string> uw (_session._template_state_dir, state_dir);
4068 XMLNode& node (state (false));
4069 node.set_property (X_("name"), name);
4071 node.remove_nodes (X_("description"));
4072 if (!description.empty()) {
4073 XMLNode* desc = new XMLNode(X_("description"));
4074 XMLNode* desc_cont = new XMLNode(X_("content"), description);
4075 desc->add_child_nocopy (*desc_cont);
4077 node.add_child_nocopy (*desc);
4082 IO::set_name_in_state (*node.children().front(), name);
4084 tree.set_root (&node);
4086 /* return zero on success, non-zero otherwise */
4087 return !tree.write (path.c_str());
4092 Route::set_name (const string& str)
4098 if (str == name()) {
4102 string name = Route::ensure_track_or_route_name (str, _session);
4103 SessionObject::set_name (name);
4105 bool ret = (_input->set_name(name) && _output->set_name(name));
4108 /* rename the main outs. Leave other IO processors
4109 * with whatever name they already have, because its
4110 * just fine as it is (it will not contain the route
4111 * name if its a port insert, port send or port return).
4115 if (_main_outs->set_name (name)) {
4116 /* XXX returning false here is stupid because
4117 we already changed the route name.
4127 /** Set the name of a route in an XML description.
4128 * @param node XML <Route> node to set the name in.
4129 * @param name New name.
4132 Route::set_name_in_state (XMLNode& node, string const & name, bool rename_playlist)
4134 node.set_property (X_("name"), name);
4136 XMLNodeList children = node.children();
4137 for (XMLNodeIterator i = children.begin(); i != children.end(); ++i) {
4139 if ((*i)->name() == X_("IO")) {
4141 IO::set_name_in_state (**i, name);
4143 } else if ((*i)->name() == X_("Processor")) {
4146 if ((*i)->get_property (X_("role"), str) && str == X_("Main")) {
4147 (*i)->set_property (X_("name"), name);
4150 } else if ((*i)->name() == X_("Diskstream")) {
4152 if (rename_playlist) {
4153 (*i)->set_property (X_("playlist"), name + ".1");
4155 (*i)->set_property (X_("name"), name);
4161 boost::shared_ptr<Send>
4162 Route::internal_send_for (boost::shared_ptr<const Route> target) const
4164 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
4166 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
4167 boost::shared_ptr<InternalSend> send;
4169 if ((send = boost::dynamic_pointer_cast<InternalSend>(*i)) != 0) {
4170 if (send->target_route() == target) {
4176 return boost::shared_ptr<Send>();
4180 Route::set_denormal_protection (bool yn)
4182 if (_denormal_protection != yn) {
4183 _denormal_protection = yn;
4184 denormal_protection_changed (); /* EMIT SIGNAL */
4189 Route::denormal_protection () const
4191 return _denormal_protection;
4195 Route::set_active (bool yn, void* src)
4197 if (_session.transport_rolling()) {
4201 if (_route_group && src != _route_group && _route_group->is_active() && _route_group->is_route_active()) {
4202 _route_group->foreach_route (boost::bind (&Route::set_active, _1, yn, _route_group));
4206 if (_active != yn) {
4208 _input->set_active (yn);
4209 _output->set_active (yn);
4210 flush_processors ();
4211 active_changed (); // EMIT SIGNAL
4212 _session.set_dirty ();
4216 boost::shared_ptr<Pannable>
4217 Route::pannable() const
4222 boost::shared_ptr<Panner>
4223 Route::panner() const
4226 return _main_outs->panner_shell()->panner();
4229 boost::shared_ptr<PannerShell>
4230 Route::panner_shell() const
4232 return _main_outs->panner_shell();
4235 boost::shared_ptr<GainControl>
4236 Route::gain_control() const
4238 return _gain_control;
4241 boost::shared_ptr<GainControl>
4242 Route::trim_control() const
4244 return _trim_control;
4247 boost::shared_ptr<PhaseControl>
4248 Route::phase_control() const
4250 return _phase_control;
4253 boost::shared_ptr<AutomationControl>
4254 Route::get_control (const Evoral::Parameter& param)
4256 /* either we own the control or .... */
4258 boost::shared_ptr<AutomationControl> c = boost::dynamic_pointer_cast<AutomationControl>(control (param));
4262 /* maybe one of our processors does or ... */
4264 Glib::Threads::RWLock::ReaderLock rm (_processor_lock);
4265 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
4266 if ((c = boost::dynamic_pointer_cast<AutomationControl>((*i)->control (param))) != 0) {
4274 /* nobody does so we'll make a new one */
4276 c = boost::dynamic_pointer_cast<AutomationControl>(control_factory(param));
4283 boost::shared_ptr<Processor>
4284 Route::nth_plugin (uint32_t n) const
4286 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
4287 ProcessorList::const_iterator i;
4289 for (i = _processors.begin(); i != _processors.end(); ++i) {
4290 if (boost::dynamic_pointer_cast<PluginInsert> (*i)) {
4297 return boost::shared_ptr<Processor> ();
4300 boost::shared_ptr<Processor>
4301 Route::nth_send (uint32_t n) const
4303 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
4304 ProcessorList::const_iterator i;
4306 for (i = _processors.begin(); i != _processors.end(); ++i) {
4307 if (boost::dynamic_pointer_cast<Send> (*i)) {
4309 if ((*i)->name().find (_("Monitor")) == 0) {
4310 /* send to monitor section is not considered
4311 to be an accessible send.
4322 return boost::shared_ptr<Processor> ();
4326 Route::has_io_processor_named (const string& name)
4328 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
4329 ProcessorList::iterator i;
4331 for (i = _processors.begin(); i != _processors.end(); ++i) {
4332 if (boost::dynamic_pointer_cast<Send> (*i) ||
4333 boost::dynamic_pointer_cast<PortInsert> (*i)) {
4334 if ((*i)->name() == name) {
4344 Route::set_processor_positions ()
4346 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
4348 bool had_amp = false;
4349 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
4350 (*i)->set_pre_fader (!had_amp);
4357 /** Called when there is a proposed change to the input port count */
4359 Route::input_port_count_changing (ChanCount to)
4361 list<pair<ChanCount, ChanCount> > c = try_configure_processors (to, 0);
4363 /* The processors cannot be configured with the new input arrangement, so
4369 /* The change is ok */
4373 /** Called when there is a proposed change to the output port count */
4375 Route::output_port_count_changing (ChanCount to)
4377 if (_strict_io && !_in_configure_processors) {
4380 for (DataType::iterator t = DataType::begin(); t != DataType::end(); ++t) {
4381 if (processor_out_streams.get(*t) > to.get(*t)) {
4385 /* The change is ok */
4390 Route::unknown_processors () const
4394 if (_session.get_disable_all_loaded_plugins ()) {
4395 // Do not list "missing plugins" if they are explicitly disabled
4399 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
4400 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
4401 if (boost::dynamic_pointer_cast<UnknownProcessor const> (*i)) {
4402 p.push_back ((*i)->name ());
4411 Route::update_port_latencies (PortSet& from, PortSet& to, bool playback, samplecnt_t our_latency) const
4413 /* we assume that all our input ports feed all our output ports. its not
4414 universally true, but the alternative is way too corner-case to worry about.
4417 LatencyRange all_connections;
4420 all_connections.min = 0;
4421 all_connections.max = 0;
4423 all_connections.min = ~((pframes_t) 0);
4424 all_connections.max = 0;
4426 /* iterate over all "from" ports and determine the latency range for all of their
4427 connections to the "outside" (outside of this Route).
4430 for (PortSet::iterator p = from.begin(); p != from.end(); ++p) {
4434 p->get_connected_latency_range (range, playback);
4436 all_connections.min = min (all_connections.min, range.min);
4437 all_connections.max = max (all_connections.max, range.max);
4441 /* set the "from" port latencies to the max/min range of all their connections */
4443 for (PortSet::iterator p = from.begin(); p != from.end(); ++p) {
4444 p->set_private_latency_range (all_connections, playback);
4447 /* set the ports "in the direction of the flow" to the same value as above plus our own signal latency */
4449 all_connections.min += our_latency;
4450 all_connections.max += our_latency;
4452 for (PortSet::iterator p = to.begin(); p != to.end(); ++p) {
4453 p->set_private_latency_range (all_connections, playback);
4456 return all_connections.max;
4460 Route::set_private_port_latencies (bool playback) const
4462 samplecnt_t own_latency = 0;
4464 /* Processor list not protected by lock: MUST BE CALLED FROM PROCESS THREAD
4465 OR LATENCY CALLBACK.
4467 This is called (early) from the latency callback. It computes the REAL
4468 latency associated with each port and stores the result as the "private"
4469 latency of the port. A later call to Route::set_public_port_latencies()
4470 sets all ports to the same value to reflect the fact that we do latency
4471 compensation and so all signals are delayed by the same amount as they
4472 flow through ardour.
4475 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
4476 if ((*i)->active ()) {
4477 own_latency += (*i)->signal_latency ();
4482 /* playback: propagate latency from "outside the route" to outputs to inputs */
4483 return update_port_latencies (_output->ports (), _input->ports (), true, own_latency);
4485 /* capture: propagate latency from "outside the route" to inputs to outputs */
4486 return update_port_latencies (_input->ports (), _output->ports (), false, own_latency);
4491 Route::set_public_port_latencies (samplecnt_t value, bool playback) const
4493 /* this is called to set the JACK-visible port latencies, which take
4494 latency compensation into account.
4503 const PortSet& ports (_input->ports());
4504 for (PortSet::const_iterator p = ports.begin(); p != ports.end(); ++p) {
4505 p->set_public_latency_range (range, playback);
4510 const PortSet& ports (_output->ports());
4511 for (PortSet::const_iterator p = ports.begin(); p != ports.end(); ++p) {
4512 p->set_public_latency_range (range, playback);
4517 /** Put the invisible processors in the right place in _processors.
4518 * Must be called with a writer lock on _processor_lock held.
4521 __attribute__((annotate("realtime")))
4524 Route::setup_invisible_processors ()
4527 Glib::Threads::RWLock::WriterLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
4528 assert (!lm.locked ());
4532 /* too early to be doing this stuff */
4536 /* we'll build this new list here and then use it
4538 * TODO put the ProcessorList is on the stack for RT-safety.
4541 ProcessorList new_processors;
4542 ProcessorList::iterator dr;
4543 ProcessorList::iterator dw;
4545 /* find visible processors */
4547 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
4548 if ((*i)->display_to_user ()) {
4549 new_processors.push_back (*i);
4555 ProcessorList::iterator amp = find (new_processors.begin(), new_processors.end(), _amp);
4557 if (amp == new_processors.end ()) {
4558 error << string_compose (_("Amp/Fader on Route '%1' went AWOL. Re-added."), name()) << endmsg;
4559 new_processors.push_front (_amp);
4560 amp = find (new_processors.begin(), new_processors.end(), _amp);
4563 /* and the processor after the amp */
4565 ProcessorList::iterator after_amp = amp;
4571 switch (_meter_point) {
4573 assert (!_meter->display_to_user ());
4574 new_processors.push_front (_meter);
4577 assert (!_meter->display_to_user ());
4578 new_processors.insert (amp, _meter);
4580 case MeterPostFader:
4581 /* do nothing here */
4584 /* do nothing here */
4587 /* the meter is visible, so we don't touch it here */
4594 assert (_main_outs);
4595 assert (!_main_outs->display_to_user ());
4596 new_processors.push_back (_main_outs);
4598 /* iterator for the main outs */
4600 ProcessorList::iterator main = new_processors.end();
4603 /* OUTPUT METERING */
4605 if (_meter && (_meter_point == MeterOutput || _meter_point == MeterPostFader)) {
4606 assert (!_meter->display_to_user ());
4608 /* add the processor just before or just after the main outs */
4610 ProcessorList::iterator meter_point = main;
4612 if (_meter_point == MeterOutput) {
4615 new_processors.insert (meter_point, _meter);
4620 if (_monitor_send && !is_monitor ()) {
4621 assert (!_monitor_send->display_to_user ());
4622 switch (Config->get_listen_position ()) {
4623 case PreFaderListen:
4624 switch (Config->get_pfl_position ()) {
4625 case PFLFromBeforeProcessors:
4626 new_processors.push_front (_monitor_send);
4628 case PFLFromAfterProcessors:
4629 new_processors.insert (amp, _monitor_send);
4632 _monitor_send->set_can_pan (false);
4634 case AfterFaderListen:
4635 switch (Config->get_afl_position ()) {
4636 case AFLFromBeforeProcessors:
4637 new_processors.insert (after_amp, _monitor_send);
4639 case AFLFromAfterProcessors:
4640 new_processors.insert (new_processors.end(), _monitor_send);
4643 _monitor_send->set_can_pan (true);
4648 #if 0 // not used - just yet
4649 if (!is_master() && !is_monitor() && !is_auditioner()) {
4650 new_processors.push_front (_delayline);
4654 /* MONITOR CONTROL */
4656 if (_monitor_control && is_monitor ()) {
4657 assert (!_monitor_control->display_to_user ());
4658 new_processors.insert (amp, _monitor_control);
4663 ProcessorList::iterator trim = new_processors.end();
4665 if (_trim->active()) {
4666 assert (!_trim->display_to_user ());
4667 new_processors.push_front (_trim);
4668 trim = new_processors.begin();
4671 /* INTERNAL RETURN */
4673 /* doing this here means that any monitor control will come after
4674 the return and trim.
4678 assert (!_intreturn->display_to_user ());
4679 new_processors.push_front (_intreturn);
4682 /* DISK READER & WRITER (for Track objects) */
4684 if (_disk_reader || _disk_writer) {
4685 switch (_disk_io_point) {
4686 case DiskIOPreFader:
4687 if (trim != new_processors.end()) {
4688 /* insert BEFORE TRIM */
4690 new_processors.insert (trim, _disk_writer);
4693 new_processors.insert (trim, _disk_reader);
4697 new_processors.push_front (_disk_writer);
4700 new_processors.push_front (_disk_reader);
4704 case DiskIOPostFader:
4705 /* insert BEFORE main outs */
4707 new_processors.insert (main, _disk_writer);
4710 new_processors.insert (main, _disk_reader);
4714 /* reader and writer are visible under this condition, so they
4715 * are not invisible and thus not handled here.
4721 /* ensure dist-writer is before disk-reader */
4722 if (_disk_reader && _disk_writer) {
4723 ProcessorList::iterator reader_pos = find (new_processors.begin(), new_processors.end(), _disk_reader);
4724 ProcessorList::iterator writer_pos = find (new_processors.begin(), new_processors.end(), _disk_writer);
4725 assert (reader_pos != new_processors.end ());
4726 assert (writer_pos != new_processors.end ());
4727 if (std::distance (new_processors.begin(), reader_pos) < std::distance (new_processors.begin(), writer_pos)) {
4728 new_processors.erase (reader_pos);
4729 assert (writer_pos == find (new_processors.begin(), new_processors.end(), _disk_writer));
4730 new_processors.insert (++writer_pos, _disk_reader);
4735 /* EXPORT PROCESSOR */
4736 if (_capturing_processor) {
4737 assert (!_capturing_processor->display_to_user ());
4738 ProcessorList::iterator reader_pos = find (new_processors.begin(), new_processors.end(), _disk_reader);
4739 if (reader_pos != new_processors.end()) {
4740 /* insert after disk-reader */
4741 new_processors.insert (++reader_pos, _capturing_processor);
4743 new_processors.push_front (_capturing_processor);
4748 _processors = new_processors;
4750 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
4751 if (!(*i)->display_to_user () && !(*i)->enabled () && (*i) != _monitor_send) {
4752 (*i)->enable (true);
4756 DEBUG_TRACE (DEBUG::Processors, string_compose ("%1: setup_invisible_processors\n", _name));
4757 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
4758 DEBUG_TRACE (DEBUG::Processors, string_compose ("\t%1\n", (*i)->name ()));
4765 Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
4766 Glib::Threads::RWLock::ReaderLock lp (_processor_lock);
4770 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
4771 boost::shared_ptr<Delivery> d = boost::dynamic_pointer_cast<Delivery>(*i);
4778 /** If the meter point is `Custom', make a note of where the meter is.
4779 * This is so that if the meter point is subsequently set to something else,
4780 * and then back to custom, we can put the meter back where it was last time
4781 * custom was enabled.
4783 * Must be called with the _processor_lock held.
4786 Route::maybe_note_meter_position ()
4788 if (_meter_point != MeterCustom) {
4792 _custom_meter_position_noted = true;
4793 /* custom meter points range from after trim to before panner/main_outs
4794 * this is a limitation by the current processor UI
4796 bool seen_trim = false;
4797 _processor_after_last_custom_meter.reset();
4798 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
4799 if ((*i) == _trim) {
4802 if ((*i) == _main_outs) {
4803 _processor_after_last_custom_meter = *i;
4806 if (boost::dynamic_pointer_cast<PeakMeter> (*i)) {
4808 _processor_after_last_custom_meter = _trim;
4810 ProcessorList::iterator j = i;
4812 assert(j != _processors.end ()); // main_outs should be before
4813 _processor_after_last_custom_meter = *j;
4818 assert(_processor_after_last_custom_meter.lock());
4821 boost::shared_ptr<Processor>
4822 Route::processor_by_id (PBD::ID id) const
4824 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
4825 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
4826 if ((*i)->id() == id) {
4831 return boost::shared_ptr<Processor> ();
4834 /** @return what we should be metering; either the data coming from the input
4835 * IO or the data that is flowing through the route.
4838 Route::metering_state () const
4840 return MeteringRoute;
4844 Route::has_external_redirects () const
4846 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
4848 /* ignore inactive processors and obviously ignore the main
4849 * outs since everything has them and we don't care.
4852 if ((*i)->active() && (*i) != _main_outs && (*i)->does_routing()) {
4860 boost::shared_ptr<Processor>
4861 Route::the_instrument () const
4863 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
4864 return the_instrument_unlocked ();
4867 boost::shared_ptr<Processor>
4868 Route::the_instrument_unlocked () const
4870 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
4871 boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert>(*i);
4872 if (pi && pi->plugin ()->get_info ()->is_instrument ()) {
4876 return boost::shared_ptr<Processor>();
4882 Route::non_realtime_locate (samplepos_t pos)
4884 Automatable::non_realtime_locate (pos);
4887 _pannable->non_realtime_locate (pos);
4890 if (_delayline.get()) {
4891 _delayline.get()->flush();
4895 //Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
4896 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
4898 for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
4899 (*i)->non_realtime_locate (pos);
4905 Route::fill_buffers_with_input (BufferSet& bufs, boost::shared_ptr<IO> io, pframes_t nframes)
4912 * We don't currently mix MIDI input together, so we don't need the
4913 * complex logic of the audio case.
4916 n_buffers = bufs.count().n_midi ();
4918 for (i = 0; i < n_buffers; ++i) {
4920 boost::shared_ptr<MidiPort> source_port = io->midi (i);
4921 MidiBuffer& buf (bufs.get_midi (i));
4924 buf.copy (source_port->get_midi_buffer(nframes));
4926 buf.silence (nframes);
4932 n_buffers = bufs.count().n_audio();
4934 size_t n_ports = io->n_ports().n_audio();
4935 float scaling = 1.0f;
4937 if (n_ports > n_buffers) {
4938 scaling = ((float) n_buffers) / n_ports;
4941 for (i = 0; i < n_ports; ++i) {
4943 /* if there are more ports than buffers, map them onto buffers
4944 * in a round-robin fashion
4947 boost::shared_ptr<AudioPort> source_port = io->audio (i);
4948 AudioBuffer& buf (bufs.get_audio (i%n_buffers));
4950 if (i < n_buffers) {
4952 /* first time through just copy a channel into
4956 buf.read_from (source_port->get_audio_buffer (nframes), nframes);
4958 if (scaling != 1.0f) {
4959 buf.apply_gain (scaling, nframes);
4964 /* on subsequent times around, merge data from
4965 * the port with what is already there
4968 if (scaling != 1.0f) {
4969 buf.accumulate_with_gain_from (source_port->get_audio_buffer (nframes), nframes, 0, scaling);
4971 buf.accumulate_from (source_port->get_audio_buffer (nframes), nframes);
4976 /* silence any remaining buffers */
4978 for (; i < n_buffers; ++i) {
4979 AudioBuffer& buf (bufs.get_audio (i));
4980 buf.silence (nframes);
4983 /* establish the initial setup of the buffer set, reflecting what was
4984 copied into it. unless, of course, we are the auditioner, in which
4985 case nothing was fed into it from the inputs at all.
4988 if (!is_auditioner()) {
4989 bufs.set_count (io->n_ports());
4993 boost::shared_ptr<AutomationControl>
4994 Route::pan_azimuth_control() const
4997 # undef MIXBUS_PORTS_H
4998 # include "../../gtk2_ardour/mixbus_ports.h"
4999 boost::shared_ptr<ARDOUR::PluginInsert> plug = ch_post();
5001 return boost::shared_ptr<AutomationControl>();
5003 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (plug->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_channel_post_pan)));
5005 if (!_pannable || !panner()) {
5006 return boost::shared_ptr<AutomationControl>();
5008 return _pannable->pan_azimuth_control;
5012 boost::shared_ptr<AutomationControl>
5013 Route::pan_elevation_control() const
5015 if (Profile->get_mixbus() || !_pannable || !panner()) {
5016 return boost::shared_ptr<AutomationControl>();
5019 set<Evoral::Parameter> c = panner()->what_can_be_automated ();
5021 if (c.find (PanElevationAutomation) != c.end()) {
5022 return _pannable->pan_elevation_control;
5024 return boost::shared_ptr<AutomationControl>();
5027 boost::shared_ptr<AutomationControl>
5028 Route::pan_width_control() const
5031 if (mixbus() && _ch_pre) {
5033 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl>(_ch_pre->control(Evoral::Parameter(PluginAutomation, 0, 5)));
5036 if (Profile->get_mixbus() || !_pannable || !panner()) {
5037 return boost::shared_ptr<AutomationControl>();
5040 set<Evoral::Parameter> c = panner()->what_can_be_automated ();
5042 if (c.find (PanWidthAutomation) != c.end()) {
5043 return _pannable->pan_width_control;
5045 return boost::shared_ptr<AutomationControl>();
5048 boost::shared_ptr<AutomationControl>
5049 Route::pan_frontback_control() const
5051 if (Profile->get_mixbus() || !_pannable || !panner()) {
5052 return boost::shared_ptr<AutomationControl>();
5055 set<Evoral::Parameter> c = panner()->what_can_be_automated ();
5057 if (c.find (PanFrontBackAutomation) != c.end()) {
5058 return _pannable->pan_frontback_control;
5060 return boost::shared_ptr<AutomationControl>();
5063 boost::shared_ptr<AutomationControl>
5064 Route::pan_lfe_control() const
5066 if (Profile->get_mixbus() || !_pannable || !panner()) {
5067 return boost::shared_ptr<AutomationControl>();
5070 set<Evoral::Parameter> c = panner()->what_can_be_automated ();
5072 if (c.find (PanLFEAutomation) != c.end()) {
5073 return _pannable->pan_lfe_control;
5075 return boost::shared_ptr<AutomationControl>();
5080 Route::eq_band_cnt () const
5082 if (Profile->get_mixbus()) {
5084 if (is_master() || mixbus()) {
5093 /* Ardour has no well-known EQ object */
5098 boost::shared_ptr<AutomationControl>
5099 Route::eq_gain_controllable (uint32_t band) const
5102 boost::shared_ptr<PluginInsert> eq = ch_eq();
5105 return boost::shared_ptr<AutomationControl>();
5108 uint32_t port_number;
5109 if (is_master() || mixbus()) {
5111 case 0: port_number = 4; break;
5112 case 1: port_number = 3; break;
5113 case 2: port_number = 2; break;
5115 return boost::shared_ptr<AutomationControl>();
5120 case 0: port_number = 14; break;
5121 case 1: port_number = 12; break;
5122 case 2: port_number = 10; break;
5123 case 3: port_number = 8; break;
5125 return boost::shared_ptr<AutomationControl>();
5129 case 0: port_number = 8; break;
5130 case 1: port_number = 6; break;
5131 case 2: port_number = 4; break;
5133 return boost::shared_ptr<AutomationControl>();
5138 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_number)));
5140 return boost::shared_ptr<AutomationControl>();
5143 boost::shared_ptr<AutomationControl>
5144 Route::eq_freq_controllable (uint32_t band) const
5147 if (mixbus() || is_master()) {
5148 /* no frequency controls for mixbusses or master */
5149 return boost::shared_ptr<AutomationControl>();
5152 boost::shared_ptr<PluginInsert> eq = ch_eq();
5155 return boost::shared_ptr<AutomationControl>();
5158 uint32_t port_number;
5161 case 0: port_number = 13; break; // lo
5162 case 1: port_number = 11; break; // lo mid
5163 case 2: port_number = 9; break; // hi mid
5164 case 3: port_number = 7; break; // hi
5166 return boost::shared_ptr<AutomationControl>();
5170 case 0: port_number = 7; break;
5171 case 1: port_number = 5; break;
5172 case 2: port_number = 3; break;
5174 return boost::shared_ptr<AutomationControl>();
5178 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_number)));
5180 return boost::shared_ptr<AutomationControl>();
5184 boost::shared_ptr<AutomationControl>
5185 Route::eq_q_controllable (uint32_t band) const
5187 return boost::shared_ptr<AutomationControl>();
5190 boost::shared_ptr<AutomationControl>
5191 Route::eq_shape_controllable (uint32_t band) const
5194 boost::shared_ptr<PluginInsert> eq = ch_eq();
5195 if (is_master() || mixbus() || !eq) {
5196 return boost::shared_ptr<AutomationControl>();
5200 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 4))); // lo bell
5203 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 3))); // hi bell
5209 return boost::shared_ptr<AutomationControl>();
5212 boost::shared_ptr<AutomationControl>
5213 Route::eq_enable_controllable () const
5216 boost::shared_ptr<PluginInsert> eq = ch_eq();
5219 return boost::shared_ptr<AutomationControl>();
5222 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 1)));
5224 return boost::shared_ptr<AutomationControl>();
5228 boost::shared_ptr<AutomationControl>
5229 Route::filter_freq_controllable (bool hpf) const
5232 boost::shared_ptr<PluginInsert> eq = ch_eq();
5234 if (is_master() || mixbus() || !eq) {
5235 return boost::shared_ptr<AutomationControl>();
5239 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 5))); // HPF freq
5241 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 2)));
5245 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 6))); // LPF freq
5247 return boost::shared_ptr<AutomationControl>();
5252 return boost::shared_ptr<AutomationControl>();
5256 boost::shared_ptr<AutomationControl>
5257 Route::filter_slope_controllable (bool) const
5259 return boost::shared_ptr<AutomationControl>();
5262 boost::shared_ptr<AutomationControl>
5263 Route::filter_enable_controllable (bool) const
5266 boost::shared_ptr<PluginInsert> eq = ch_eq();
5268 if (is_master() || mixbus() || !eq) {
5269 return boost::shared_ptr<AutomationControl>();
5272 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 2)));
5274 return boost::shared_ptr<AutomationControl>();
5279 Route::eq_band_name (uint32_t band) const
5282 if (is_master() || mixbus()) {
5284 if (Profile->get_mixbus()) {
5286 case 0: return _("lo");
5287 case 1: return _("mid");
5288 case 2: return _("hi");
5289 default: return string();
5297 case 0: return _("lo");
5298 case 1: return _("lo mid");
5299 case 2: return _("hi mid");
5300 case 3: return _("hi");
5301 default: return string();
5307 boost::shared_ptr<AutomationControl>
5308 Route::comp_enable_controllable () const
5311 boost::shared_ptr<PluginInsert> comp = ch_comp();
5314 return boost::shared_ptr<AutomationControl>();
5317 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (comp->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 1)));
5319 return boost::shared_ptr<AutomationControl>();
5322 boost::shared_ptr<AutomationControl>
5323 Route::comp_threshold_controllable () const
5326 boost::shared_ptr<PluginInsert> comp = ch_comp();
5329 return boost::shared_ptr<AutomationControl>();
5332 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (comp->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 2)));
5335 return boost::shared_ptr<AutomationControl>();
5338 boost::shared_ptr<AutomationControl>
5339 Route::comp_speed_controllable () const
5342 boost::shared_ptr<PluginInsert> comp = ch_comp();
5345 return boost::shared_ptr<AutomationControl>();
5348 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (comp->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 3)));
5350 return boost::shared_ptr<AutomationControl>();
5353 boost::shared_ptr<AutomationControl>
5354 Route::comp_mode_controllable () const
5357 boost::shared_ptr<PluginInsert> comp = ch_comp();
5360 return boost::shared_ptr<AutomationControl>();
5363 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (comp->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 4)));
5365 return boost::shared_ptr<AutomationControl>();
5368 boost::shared_ptr<AutomationControl>
5369 Route::comp_makeup_controllable () const
5372 boost::shared_ptr<PluginInsert> comp = ch_comp();
5375 return boost::shared_ptr<AutomationControl>();
5378 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (comp->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 5)));
5380 return boost::shared_ptr<AutomationControl>();
5383 boost::shared_ptr<ReadOnlyControl>
5384 Route::comp_redux_controllable () const
5387 boost::shared_ptr<PluginInsert> comp = ch_comp();
5390 return boost::shared_ptr<ReadOnlyControl>();
5393 return comp->control_output (2);
5395 return comp->control_output (6);
5399 return boost::shared_ptr<ReadOnlyControl>();
5404 Route::comp_mode_name (uint32_t mode) const
5409 return _("Leveler");
5411 return _("Compressor");
5413 return _("Limiter");
5415 return mixbus() ? _("Sidechain") : _("Limiter");
5425 Route::comp_speed_name (uint32_t mode) const
5443 boost::shared_ptr<AutomationControl>
5444 Route::send_level_controllable (uint32_t n) const
5447 # undef MIXBUS_PORTS_H
5448 # include "../../gtk2_ardour/mixbus_ports.h"
5449 boost::shared_ptr<ARDOUR::PluginInsert> plug = ch_post();
5450 if (plug && !mixbus()) {
5451 uint32_t port_id = 0;
5453 case 0: port_id = port_channel_post_aux1_level; break;
5454 case 1: port_id = port_channel_post_aux2_level; break;
5455 case 2: port_id = port_channel_post_aux3_level; break;
5456 case 3: port_id = port_channel_post_aux4_level; break;
5457 case 4: port_id = port_channel_post_aux5_level; break;
5458 case 5: port_id = port_channel_post_aux6_level; break;
5459 case 6: port_id = port_channel_post_aux7_level; break;
5460 case 7: port_id = port_channel_post_aux8_level; break;
5462 case 8: port_id = port_channel_post_aux9_level; break;
5463 case 9: port_id = port_channel_post_aux10_level; break;
5464 case 10: port_id = port_channel_post_aux11_level; break;
5465 case 11: port_id = port_channel_post_aux12_level; break;
5472 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (plug->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_id)));
5483 boost::shared_ptr<Send> s = boost::dynamic_pointer_cast<Send>(nth_send (n));
5485 return boost::shared_ptr<AutomationControl>();
5487 return s->gain_control ();
5490 boost::shared_ptr<AutomationControl>
5491 Route::send_enable_controllable (uint32_t n) const
5494 # undef MIXBUS_PORTS_H
5495 # include "../../gtk2_ardour/mixbus_ports.h"
5496 boost::shared_ptr<ARDOUR::PluginInsert> plug = ch_post();
5497 if (plug && !mixbus()) {
5498 uint32_t port_id = 0;
5500 case 0: port_id = port_channel_post_aux1_asgn; break;
5501 case 1: port_id = port_channel_post_aux2_asgn; break;
5502 case 2: port_id = port_channel_post_aux3_asgn; break;
5503 case 3: port_id = port_channel_post_aux4_asgn; break;
5504 case 4: port_id = port_channel_post_aux5_asgn; break;
5505 case 5: port_id = port_channel_post_aux6_asgn; break;
5506 case 6: port_id = port_channel_post_aux7_asgn; break;
5507 case 7: port_id = port_channel_post_aux8_asgn; break;
5509 case 8: port_id = port_channel_post_aux9_asgn; break;
5510 case 9: port_id = port_channel_post_aux10_asgn; break;
5511 case 10: port_id = port_channel_post_aux11_asgn; break;
5512 case 11: port_id = port_channel_post_aux12_asgn; break;
5519 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (plug->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_id)));
5530 /* although Ardour sends have enable/disable as part of the Processor
5531 * API, it is not exposed as a controllable.
5533 * XXX: we should fix this (make it click-free, automatable enable-control)
5535 return boost::shared_ptr<AutomationControl>();
5539 Route::send_name (uint32_t n) const
5542 boost::shared_ptr<ARDOUR::PluginInsert> plug = ch_post();
5543 if (plug && !mixbus()) {
5546 return _session.get_mixbus (n)->name();
5551 return _session.get_mixbus (n)->name();
5557 boost::shared_ptr<Processor> p = nth_send (n);
5565 boost::shared_ptr<AutomationControl>
5566 Route::master_send_enable_controllable () const
5569 boost::shared_ptr<ARDOUR::PluginInsert> plug = ch_post();
5571 return boost::shared_ptr<AutomationControl>();
5573 # undef MIXBUS_PORTS_H
5574 # include "../../gtk2_ardour/mixbus_ports.h"
5575 return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (plug->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_channel_post_mstr_assign)));
5577 return boost::shared_ptr<AutomationControl>();
5582 Route::slaved () const
5584 if (!_gain_control) {
5587 /* just test one particular control, not all of them */
5588 return _gain_control->slaved ();
5592 Route::slaved_to (boost::shared_ptr<VCA> vca) const
5594 if (!vca || !_gain_control) {
5598 /* just test one particular control, not all of them */
5600 return _gain_control->slaved_to (vca->gain_control());
5604 Route::muted_by_others_soloing () const
5606 if (!can_be_muted_by_others ()) {
5610 return _session.soloing() && !_solo_control->soloed() && !_solo_isolate_control->solo_isolated();
5614 Route::clear_all_solo_state ()
5616 _solo_control->clear_all_solo_state ();
5619 boost::shared_ptr<AutomationControl>
5620 Route::automation_control_recurse (PBD::ID const & id) const
5622 boost::shared_ptr<AutomationControl> ac = Automatable::automation_control (id);
5628 Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
5630 for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
5631 if ((ac = (*i)->automation_control (id))) {
5636 return boost::shared_ptr<AutomationControl> ();
5640 Route::slavables () const
5642 SlavableControlList rv;
5643 rv.push_back (_gain_control);
5644 rv.push_back (_mute_control);
5645 rv.push_back (_solo_control);
5650 Route::set_disk_io_point (DiskIOPoint diop)
5652 bool display = false;
5654 cerr << "set disk io to " << enum_2_string (diop) << endl;
5665 _disk_writer->set_display_to_user (display);
5669 _disk_reader->set_display_to_user (display);
5672 const bool changed = (diop != _disk_io_point);
5674 _disk_io_point = diop;
5677 Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
5678 configure_processors (0);
5681 processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
5684 #ifdef USE_TRACKS_CODE_FEATURES
5686 /* This is the Tracks version of Track::monitoring_state().
5688 * Ardour developers: try to flag or fix issues if parts of the libardour API
5689 * change in ways that invalidate this
5693 Route::monitoring_state () const
5695 /* Explicit requests */
5697 if (_monitoring != MonitorInput) {
5698 return MonitoringInput;
5701 if (_monitoring & MonitorDisk) {
5702 return MonitoringDisk;
5705 /* This is an implementation of the truth table in doc/monitor_modes.pdf;
5706 I don't think it's ever going to be too pretty too look at.
5709 // GZ: NOT USED IN TRACKS
5710 //bool const auto_input = _session.config.get_auto_input ();
5711 //bool const software_monitor = Config->get_monitoring_model() == SoftwareMonitoring;
5712 //bool const tape_machine_mode = Config->get_tape_machine_mode ();
5714 bool const roll = _session.transport_rolling ();
5715 bool const track_rec = _diskstream->record_enabled ();
5716 bool session_rec = _session.actively_recording ();
5720 if (!session_rec && roll) {
5721 return MonitoringDisk;
5723 return MonitoringInput;
5729 return MonitoringDisk;
5733 return MonitoringSilence;
5738 /* This is the Ardour/Mixbus version of Track::monitoring_state().
5740 * Tracks developers: do NOT modify this method under any circumstances.
5744 Route::monitoring_state () const
5746 if (!_disk_reader) {
5747 return MonitoringInput;
5750 /* Explicit requests */
5751 MonitorChoice m (_monitoring_control->monitoring_choice());
5753 if (m != MonitorAuto) {
5755 MonitorState ms ((MonitorState) 0);
5757 if (m & MonitorInput) {
5758 ms = MonitoringInput;
5761 if (m & MonitorDisk) {
5762 ms = MonitorState (ms | MonitoringDisk);
5768 switch (_session.config.get_session_monitoring ()) {
5770 return MonitoringDisk;
5773 return MonitoringInput;
5779 /* This is an implementation of the truth table in doc/monitor_modes.pdf;
5780 I don't think it's ever going to be too pretty too look at.
5783 bool const roll = _session.transport_rolling ();
5784 bool const track_rec = _disk_writer->record_enabled ();
5785 bool const auto_input = _session.config.get_auto_input ();
5786 bool const software_monitor = Config->get_monitoring_model() == SoftwareMonitoring;
5787 bool const tape_machine_mode = Config->get_tape_machine_mode ();
5790 /* I suspect that just use actively_recording() is good enough all the
5791 * time, but just to keep the semantics the same as they were before
5792 * sept 26th 2012, we differentiate between the cases where punch is
5793 * enabled and those where it is not.
5795 * rg: I suspect this is not the case: monitoring may differ
5798 if (_session.config.get_punch_in() || _session.config.get_punch_out() || _session.preroll_record_punch_enabled ()) {
5799 session_rec = _session.actively_recording ();
5801 session_rec = _session.get_record_enabled();
5806 if (!session_rec && roll && auto_input) {
5807 return MonitoringDisk;
5809 return software_monitor ? MonitoringInput : MonitoringSilence;
5814 if (tape_machine_mode) {
5816 return MonitoringDisk;
5820 if (!roll && auto_input) {
5821 return software_monitor ? MonitoringInput : MonitoringSilence;
5823 return MonitoringDisk;
5829 abort(); /* NOTREACHED */
5830 return MonitoringSilence;