2 Copyright (C) 1999-2002 Paul Davis
4 This program is free software; you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation; either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program; if not, write to the Free Software
16 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <boost/shared_ptr.hpp>
30 #include <glibmm/main.h>
32 #include "midi++/mmc.h"
33 #include "midi++/port.h"
34 #include "midi++/manager.h"
36 #include "pbd/error.h"
37 #include "pbd/pthread_utils.h"
39 #include "timecode/time.h"
41 #include "ardour/configuration.h"
42 #include "ardour/debug.h"
43 #include "ardour/audioengine.h"
44 #include "ardour/session.h"
45 #include "ardour/audio_track.h"
46 #include "ardour/midi_track.h"
47 #include "ardour/midi_ui.h"
48 #include "ardour/audio_diskstream.h"
49 #include "ardour/slave.h"
50 #include "ardour/cycles.h"
55 using namespace ARDOUR;
64 boost::shared_ptr<RouteList> r = routes.reader ();
66 for (RouteList::iterator i = r->begin(); i != r->end(); ++i) {
67 MidiTrack *track = dynamic_cast<MidiTrack*>((*i).get());
76 Session::setup_midi_control ()
78 outbound_mtc_timecode_frame = 0;
79 next_quarter_frame_to_send = 0;
81 /* Set up the qtr frame message */
94 Session::spp_start (Parser &, framepos_t /*timestamp*/)
96 if (Config->get_mmc_control() && (!config.get_external_sync() || config.get_sync_source() != JACK)) {
97 request_transport_speed (1.0);
102 Session::spp_continue (Parser& ignored, framepos_t timestamp)
104 spp_start (ignored, timestamp);
108 Session::spp_stop (Parser&, framepos_t /*timestamp*/)
110 if (Config->get_mmc_control()) {
116 Session::mmc_deferred_play (MIDI::MachineControl &/*mmc*/)
118 if (Config->get_mmc_control() && (!config.get_external_sync() || (config.get_sync_source() != JACK))) {
119 request_transport_speed (1.0);
124 Session::mmc_record_pause (MIDI::MachineControl &/*mmc*/)
126 if (Config->get_mmc_control()) {
127 maybe_enable_record();
132 Session::mmc_record_strobe (MIDI::MachineControl &/*mmc*/)
134 if (!Config->get_mmc_control() || (_step_editors > 0)) {
138 /* record strobe does an implicit "Play" command */
140 if (_transport_speed != 1.0) {
142 /* start_transport() will move from Enabled->Recording, so we
143 don't need to do anything here except enable recording.
144 its not the same as maybe_enable_record() though, because
145 that *can* switch to Recording, which we do not want.
148 save_state ("", true);
149 g_atomic_int_set (&_record_status, Enabled);
150 RecordStateChanged (); /* EMIT SIGNAL */
152 request_transport_speed (1.0);
161 Session::mmc_record_exit (MIDI::MachineControl &/*mmc*/)
163 if (Config->get_mmc_control()) {
164 disable_record (false);
169 Session::mmc_stop (MIDI::MachineControl &/*mmc*/)
171 if (Config->get_mmc_control()) {
177 Session::mmc_pause (MIDI::MachineControl &/*mmc*/)
179 if (Config->get_mmc_control()) {
181 /* We support RECORD_PAUSE, so the spec says that
182 we must interpret PAUSE like RECORD_PAUSE if
186 if (actively_recording()) {
187 maybe_enable_record ();
194 static bool step_queued = false;
197 Session::mmc_step (MIDI::MachineControl &/*mmc*/, int steps)
199 if (!Config->get_mmc_control()) {
204 struct timeval diff = { 0, 0 };
206 gettimeofday (&now, 0);
208 timersub (&now, &last_mmc_step, &diff);
210 gettimeofday (&now, 0);
211 timersub (&now, &last_mmc_step, &diff);
213 if (last_mmc_step.tv_sec != 0 && (diff.tv_usec + (diff.tv_sec * 1000000)) < _engine.usecs_per_cycle()) {
217 double diff_secs = diff.tv_sec + (diff.tv_usec / 1000000.0);
218 double cur_speed = (((steps * 0.5) * timecode_frames_per_second()) / diff_secs) / timecode_frames_per_second();
220 if (_transport_speed == 0 || cur_speed * _transport_speed < 0) {
221 /* change direction */
222 step_speed = cur_speed;
224 step_speed = (0.6 * step_speed) + (0.4 * cur_speed);
230 cerr << "delta = " << diff_secs
231 << " ct = " << _transport_speed
232 << " steps = " << steps
233 << " new speed = " << cur_speed
234 << " speed = " << step_speed
238 request_transport_speed (step_speed);
242 if (midi_control_ui) {
243 RefPtr<TimeoutSource> tsrc = TimeoutSource::create (100);
244 tsrc->connect (sigc::mem_fun (*this, &Session::mmc_step_timeout));
245 tsrc->attach (midi_control_ui->main_loop()->get_context());
252 Session::mmc_rewind (MIDI::MachineControl &/*mmc*/)
254 if (Config->get_mmc_control()) {
255 request_transport_speed(-8.0f);
260 Session::mmc_fast_forward (MIDI::MachineControl &/*mmc*/)
262 if (Config->get_mmc_control()) {
263 request_transport_speed(8.0f);
268 Session::mmc_locate (MIDI::MachineControl &/*mmc*/, const MIDI::byte* mmc_tc)
270 if (!Config->get_mmc_control()) {
274 framepos_t target_frame;
275 Timecode::Time timecode;
277 timecode.hours = mmc_tc[0] & 0xf;
278 timecode.minutes = mmc_tc[1];
279 timecode.seconds = mmc_tc[2];
280 timecode.frames = mmc_tc[3];
281 timecode.rate = timecode_frames_per_second();
282 timecode.drop = timecode_drop_frames();
284 // Also takes timecode offset into account:
285 timecode_to_sample( timecode, target_frame, true /* use_offset */, false /* use_subframes */ );
287 if (target_frame > max_framepos) {
288 target_frame = max_framepos;
291 /* Some (all?) MTC/MMC devices do not send a full MTC frame
292 at the end of a locate, instead sending only an MMC
293 locate command. This causes the current position
294 of an MTC slave to become out of date. Catch this.
297 MTC_Slave* mtcs = dynamic_cast<MTC_Slave*> (_slave);
300 // cerr << "Locate *with* MTC slave\n";
301 mtcs->handle_locate (mmc_tc);
303 // cerr << "Locate without MTC slave\n";
304 request_locate (target_frame, false);
309 Session::mmc_shuttle (MIDI::MachineControl &/*mmc*/, float speed, bool forw)
311 if (!Config->get_mmc_control()) {
315 if (Config->get_shuttle_speed_threshold() >= 0 && speed > Config->get_shuttle_speed_threshold()) {
316 speed *= Config->get_shuttle_speed_factor();
320 request_transport_speed (speed);
322 request_transport_speed (-speed);
327 Session::mmc_record_enable (MIDI::MachineControl &mmc, size_t trk, bool enabled)
329 if (Config->get_mmc_control()) {
331 RouteList::iterator i;
332 boost::shared_ptr<RouteList> r = routes.reader();
334 for (i = r->begin(); i != r->end(); ++i) {
337 if ((at = dynamic_cast<AudioTrack*>((*i).get())) != 0) {
338 if (trk == at->remote_control_id()) {
339 at->set_record_enabled (enabled, &mmc);
347 /** Send MTC Full Frame message (complete Timecode time) for the start of this cycle.
348 * This resets the MTC code, the next quarter frame message that is sent will be
349 * the first one with the beginning of this cycle as the new start point.
350 * @param t time to send.
353 Session::send_full_time_code (framepos_t const t)
355 /* This function could easily send at a given frame offset, but would
356 * that be useful? Does ardour do sub-block accurate locating? [DR] */
359 Timecode::Time timecode;
361 _send_timecode_update = false;
363 if (!session_send_mtc || _slave) {
367 // Get timecode time for the given time
368 sample_to_timecode (t, timecode, true /* use_offset */, false /* no subframes */);
370 transmitting_timecode_time = timecode;
371 outbound_mtc_timecode_frame = t;
373 // I don't understand this bit yet.. [DR]
374 if (((mtc_timecode_bits >> 5) != MIDI::MTC_25_FPS) && (transmitting_timecode_time.frames % 2)) {
375 // start MTC quarter frame transmission on an even frame
376 Timecode::increment (transmitting_timecode_time, config.get_subframes_per_frame());
377 outbound_mtc_timecode_frame += _frames_per_timecode_frame;
380 // Compensate for audio latency
381 outbound_mtc_timecode_frame += _worst_output_latency;
382 next_quarter_frame_to_send = 0;
384 // Sync slave to the same Timecode time as we are on
392 msg[5] = mtc_timecode_bits | timecode.hours;
393 msg[6] = timecode.minutes;
394 msg[7] = timecode.seconds;
395 msg[8] = timecode.frames;
397 // Send message at offset 0, sent time is for the start of this cycle
398 if (MIDI::Manager::instance()->mtc_output_port()->midimsg (msg, sizeof (msg), 0)) {
399 error << _("Session: could not send full MIDI time code") << endmsg;
406 /** Send MTC (quarter-frame) messages for this cycle.
407 * Must be called exactly once per cycle from the process thread. Realtime safe.
408 * This function assumes the state of full Timecode is sane, eg. the slave is
409 * expecting quarter frame messages and has the right frame of reference (any
410 * full MTC Timecode time messages that needed to be sent should have been sent
411 * earlier already this cycle by send_full_time_code)
414 Session::send_midi_time_code_for_cycle (pframes_t nframes)
416 if (_slave || !session_send_mtc || transmitting_timecode_time.negative || (next_quarter_frame_to_send < 0)) {
417 // cerr << "(MTC) Not sending MTC\n";
421 assert (next_quarter_frame_to_send >= 0);
422 assert (next_quarter_frame_to_send <= 7);
424 /* Duration of one quarter frame */
425 framecnt_t quarter_frame_duration = ((framecnt_t) _frames_per_timecode_frame) >> 2;
427 DEBUG_TRACE (DEBUG::MTC, string_compose ("TF %1 SF %2 NQ %3 FD %4\n", _transport_frame, outbound_mtc_timecode_frame,
428 next_quarter_frame_to_send, quarter_frame_duration));
430 assert((outbound_mtc_timecode_frame + (next_quarter_frame_to_send * quarter_frame_duration))
431 >= _transport_frame);
434 // Send quarter frames for this cycle
435 while (_transport_frame + nframes > (outbound_mtc_timecode_frame +
436 (next_quarter_frame_to_send * quarter_frame_duration))) {
438 DEBUG_TRACE (DEBUG::MTC, string_compose ("next frame to send: %1\n", next_quarter_frame_to_send));
440 switch (next_quarter_frame_to_send) {
442 mtc_msg[1] = 0x00 | (transmitting_timecode_time.frames & 0xf);
445 mtc_msg[1] = 0x10 | ((transmitting_timecode_time.frames & 0xf0) >> 4);
448 mtc_msg[1] = 0x20 | (transmitting_timecode_time.seconds & 0xf);
451 mtc_msg[1] = 0x30 | ((transmitting_timecode_time.seconds & 0xf0) >> 4);
454 mtc_msg[1] = 0x40 | (transmitting_timecode_time.minutes & 0xf);
457 mtc_msg[1] = 0x50 | ((transmitting_timecode_time.minutes & 0xf0) >> 4);
460 mtc_msg[1] = 0x60 | ((mtc_timecode_bits|transmitting_timecode_time.hours) & 0xf);
463 mtc_msg[1] = 0x70 | (((mtc_timecode_bits|transmitting_timecode_time.hours) & 0xf0) >> 4);
467 const framepos_t msg_time = (outbound_mtc_timecode_frame
468 + (quarter_frame_duration * next_quarter_frame_to_send));
470 // This message must fall within this block or something is broken
471 assert(msg_time >= _transport_frame);
472 assert(msg_time < _transport_frame + nframes);
474 framepos_t out_stamp = msg_time - _transport_frame;
475 assert(out_stamp < nframes);
477 if (MIDI::Manager::instance()->mtc_output_port()->midimsg (mtc_msg, 2, out_stamp)) {
478 error << string_compose(_("Session: cannot send quarter-frame MTC message (%1)"), strerror (errno))
485 DEBUG_STR_APPEND(foo,"sending ");
486 DEBUG_STR_APPEND(foo, transmitting_timecode_time);
487 DEBUG_TRACE (DEBUG::MTC, string_compose ("%1 qfm = %2, stamp = %3\n", DEBUG_STR(foo).str(), next_quarter_frame_to_send,
491 // Increment quarter frame counter
492 next_quarter_frame_to_send++;
494 if (next_quarter_frame_to_send >= 8) {
495 // Wrap quarter frame counter
496 next_quarter_frame_to_send = 0;
497 // Increment timecode time twice
498 Timecode::increment( transmitting_timecode_time, config.get_subframes_per_frame() );
499 Timecode::increment( transmitting_timecode_time, config.get_subframes_per_frame() );
500 // Re-calculate timing of first quarter frame
501 //timecode_to_sample( transmitting_timecode_time, outbound_mtc_timecode_frame, true /* use_offset */, false );
502 outbound_mtc_timecode_frame += 8 * quarter_frame_duration;
509 /***********************************************************************
511 **********************************************************************/
515 Session::mmc_step_timeout ()
520 gettimeofday (&now, 0);
522 timersub (&now, &last_mmc_step, &diff);
523 diff_usecs = diff.tv_sec * 1000000 + diff.tv_usec;
525 if (diff_usecs > 1000000.0 || fabs (_transport_speed) < 0.0000001) {
526 /* too long or too slow, stop transport */
527 request_transport_speed (0.0);
532 if (diff_usecs < 250000.0) {
533 /* too short, just keep going */
539 request_transport_speed (_transport_speed * 0.75);
543 /*---------------------------------------------------------------------------
545 ---------------------------------------------------------------------------*/
548 Session::start_midi_thread ()
550 midi_control_ui = new MidiControlUI (*this);
551 midi_control_ui->run ();
556 Session::terminate_midi_thread ()
558 if (midi_control_ui) {
559 midi_control_ui->quit ();