3 Copyright (C) 1999-2002 Paul Davis
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the Free Software
17 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 #include <ardour/timestamps.h>
28 #include <pbd/error.h>
29 #include <pbd/stacktrace.h>
31 #include <ardour/ardour.h>
32 #include <ardour/configuration.h>
33 #include <ardour/audioengine.h>
34 #include <ardour/session.h>
35 #include <ardour/tempo.h>
39 using namespace ARDOUR;
45 Session::bbt_time (nframes_t when, BBT_Time& bbt)
47 _tempo_map->bbt_time (when, bbt);
53 Session::sync_time_vars ()
55 _current_frame_rate = (nframes_t) round (_base_frame_rate * (1.0 + (Config->get_video_pullup()/100.0)));
56 _frames_per_hour = _current_frame_rate * 3600;
57 _frames_per_smpte_frame = (double) _current_frame_rate / (double) Config->get_smpte_frames_per_second();
58 _smpte_frames_per_hour = (unsigned long) (Config->get_smpte_frames_per_second() * 3600.0);
62 Session::set_smpte_type (float fps, bool drop_frames)
64 Config->set_smpte_frames_per_second (fps);
65 Config->set_smpte_drop_frames (drop_frames);
67 last_smpte_valid = false;
68 // smpte type bits are the middle two in the upper nibble
69 switch ((int) ceil (fps)) {
75 mtc_smpte_bits = 0x20;
81 mtc_smpte_bits = 0x40;
83 mtc_smpte_bits = 0x60;
92 Session::set_smpte_offset (nframes_t off)
95 last_smpte_valid = false;
97 SMPTEOffsetChanged (); /* EMIT SIGNAL */
101 Session::set_smpte_offset_negative (bool neg)
103 _smpte_offset_negative = neg;
104 last_smpte_valid = false;
106 SMPTEOffsetChanged (); /* EMIT SIGNAL */
110 Session::smpte_to_sample( SMPTE::Time& smpte, nframes_t& sample, bool use_offset, bool use_subframes ) const
112 if (Config->get_smpte_drop_frames()) {
113 // The drop frame format was created to better approximate the 30000/1001 = 29.97002997002997....
114 // framerate of NTSC color TV. The used frame rate of drop frame is 29.97, which drifts by about
115 // 0.108 frame per hour, or about 1.3 frames per 12 hours. This is not perfect, but a lot better
116 // than using 30 non drop, which will drift with about 1.8 frame per minute.
117 // Using 29.97, drop frame real time can be accurate only every 10th minute (10 minutes of 29.97 fps
118 // is exactly 17982 frames). One minute is 1798.2 frames, but we count 30 frames per second
119 // (30 * 60 = 1800). This means that at the first minute boundary (at the end of 0:0:59:29) we
120 // are 1.8 frames too late relative to real time. By dropping 2 frames (jumping to 0:1:0:2) we are
121 // approx. 0.2 frames too early. This adds up with 0.2 too early for each minute until we are 1.8
122 // frames too early at 0:9:0:2 (9 * 0.2 = 1.8). The 10th minute brings us 1.8 frames later again
123 // (at end of 0:9:59:29), which sums up to 0 (we are back to zero at 0:10:0:0 :-).
127 // SMPTE value frames offset subframes offset seconds (rounded) 44100 sample (rounded)
128 // 0:00:00:00 0.0 0 0.000 0 (accurate)
129 // 0:00:59:29 1.8 144 60.027 2647177
130 // 0:01:00:02 -0.2 -16 60.060 2648648
131 // 0:01:59:29 1.6 128 120.020 5292883
132 // 0:02:00:02 -0.4 -32 120.053 5294354
133 // 0:02:59:29 1.4 112 180.013 7938588
134 // 0:03:00:02 -0.6 -48 180.047 7940060
135 // 0:03:59:29 1.2 96 240.007 10584294
136 // 0:04:00:02 -0.8 -64 240.040 10585766
137 // 0:04:59:29 1.0 80 300.000 13230000
138 // 0:05:00:02 -1.0 -80 300.033 13231471
139 // 0:05:59:29 0.8 64 359.993 15875706
140 // 0:06:00:02 -1.2 -96 360.027 15877177
141 // 0:06:59:29 0.6 48 419.987 18521411
142 // 0:07:00:02 -1.4 -112 420.020 18522883
143 // 0:07:59:29 0.4 32 478.980 21167117
144 // 0:08:00:02 -1.6 -128 480.013 21168589
145 // 0:08:59:29 0.2 16 539.973 23812823
146 // 0:09:00:02 -1.8 -144 540.007 23814294
147 // 0:09:59:29 0.0+ 0+ 599.967 26458529
148 // 0:10:00:00 0.0 0 600.000 26460000 (accurate)
150 // Per Sigmond <per@sigmond.no>
152 // Samples inside time dividable by 10 minutes (real time accurate)
153 nframes_t base_samples = ((smpte.hours * 60 * 60) + ((smpte.minutes / 10) * 10 * 60)) * frame_rate();
154 // Samples inside time exceeding the nearest 10 minutes (always offset, see above)
155 long exceeding_df_minutes = smpte.minutes % 10;
156 long exceeding_df_seconds = (exceeding_df_minutes * 60) + smpte.seconds;
157 long exceeding_df_frames = (30 * exceeding_df_seconds) + smpte.frames - (2 * exceeding_df_minutes);
158 nframes_t exceeding_samples = (nframes_t) rint(exceeding_df_frames * _frames_per_smpte_frame);
159 sample = base_samples + exceeding_samples;
162 sample = (((smpte.hours * 60 * 60) + (smpte.minutes * 60) + smpte.seconds) * frame_rate()) + (nframes_t)rint(smpte.frames * _frames_per_smpte_frame);
166 sample += (long) (((double)smpte.subframes * _frames_per_smpte_frame) / 80.0);
170 if (smpte_offset_negative()) {
171 if (sample >= smpte_offset()) {
172 sample -= smpte_offset();
174 /* Prevent song-time from becoming negative */
178 if (smpte.negative) {
179 if (sample <= smpte_offset()) {
180 sample = smpte_offset() - sample;
185 sample += smpte_offset();
193 Session::sample_to_smpte( nframes_t sample, SMPTE::Time& smpte, bool use_offset, bool use_subframes ) const
195 nframes_t offset_sample;
198 offset_sample = sample;
199 smpte.negative = false;
201 if (_smpte_offset_negative) {
202 offset_sample = sample + _smpte_offset;
203 smpte.negative = false;
205 if (sample < _smpte_offset) {
206 offset_sample = (_smpte_offset - sample);
207 smpte.negative = true;
209 offset_sample = sample - _smpte_offset;
210 smpte.negative = false;
215 double smpte_frames_left_exact;
216 double smpte_frames_fraction;
217 unsigned long smpte_frames_left;
219 // Extract whole hours. Do this to prevent rounding errors with
220 // high sample numbers in the calculations that follow.
221 smpte.hours = offset_sample / _frames_per_hour;
222 offset_sample = offset_sample % _frames_per_hour;
224 // Calculate exact number of (exceeding) smpte frames and fractional frames
225 smpte_frames_left_exact = (double) offset_sample / _frames_per_smpte_frame;
226 smpte_frames_fraction = smpte_frames_left_exact - floor( smpte_frames_left_exact );
227 smpte.subframes = (long) rint(smpte_frames_fraction * 80.0);
229 // XXX Not sure if this is necessary anymore...
230 if (smpte.subframes == 80) {
231 // This can happen with 24 fps (and 29.97 fps ?)
232 smpte_frames_left_exact = ceil( smpte_frames_left_exact );
236 // Extract hour-exceeding frames for minute, second and frame calculations
237 smpte_frames_left = ((long) floor( smpte_frames_left_exact ));
239 if (Config->get_smpte_drop_frames()) {
240 // See long explanation in smpte_to_sample()...
242 // Number of 10 minute chunks
243 smpte.minutes = (smpte_frames_left / 17982) * 10; // exactly 17982 frames in 10 minutes
244 // frames exceeding the nearest 10 minute barrier
245 long exceeding_df_frames = smpte_frames_left % 17982;
247 // Find minutes exceeding the nearest 10 minute barrier
248 if (exceeding_df_frames >= 1800) { // nothing to do if we are inside the first minute (0-1799)
249 exceeding_df_frames -= 1800; // take away first minute (different number of frames than the others)
250 long extra_minutes_minus_1 = exceeding_df_frames / 1798; // how many minutes after the first one
251 exceeding_df_frames -= extra_minutes_minus_1 * 1798; // take away the (extra) minutes just found
252 smpte.minutes += extra_minutes_minus_1 + 1; // update with exceeding minutes
255 // Adjust frame numbering for dropped frames (frame 0 and 1 skipped at start of every minute except every 10th)
256 if (smpte.minutes % 10) {
257 // Every minute except every 10th
258 if (exceeding_df_frames < 28) {
259 // First second, frames 0 and 1 are skipped
261 smpte.frames = exceeding_df_frames + 2;
263 // All other seconds, all 30 frames are counted
264 exceeding_df_frames -= 28;
265 smpte.seconds = (exceeding_df_frames / 30) + 1;
266 smpte.frames = exceeding_df_frames % 30;
269 // Every 10th minute, all 30 frames counted in all seconds
270 smpte.seconds = exceeding_df_frames / 30;
271 smpte.frames = exceeding_df_frames % 30;
275 smpte.minutes = smpte_frames_left / ((long) Config->get_smpte_frames_per_second () * 60);
276 smpte_frames_left = smpte_frames_left % ((long) Config->get_smpte_frames_per_second () * 60);
277 smpte.seconds = smpte_frames_left / (long) Config->get_smpte_frames_per_second ();
278 smpte.frames = smpte_frames_left % (long) Config->get_smpte_frames_per_second ();
281 if (!use_subframes) {
287 Session::smpte_time (nframes_t when, SMPTE::Time& smpte)
289 if (last_smpte_valid && when == last_smpte_when) {
294 sample_to_smpte( when, smpte, true /* use_offset */, false /* use_subframes */ );
296 last_smpte_when = when;
298 last_smpte_valid = true;
302 Session::smpte_time_subframes (nframes_t when, SMPTE::Time& smpte)
304 if (last_smpte_valid && when == last_smpte_when) {
309 sample_to_smpte( when, smpte, true /* use_offset */, true /* use_subframes */ );
311 last_smpte_when = when;
313 last_smpte_valid = true;
317 Session::smpte_duration (nframes_t when, SMPTE::Time& smpte) const
319 sample_to_smpte( when, smpte, false /* use_offset */, true /* use_subframes */ );
323 Session::smpte_duration_string (char* buf, nframes_t when) const
327 smpte_duration (when, smpte);
328 snprintf (buf, sizeof (buf), "%02" PRIu32 ":%02" PRIu32 ":%02" PRIu32 ":%02" PRIu32, smpte.hours, smpte.minutes, smpte.seconds, smpte.frames);
332 Session::smpte_time (SMPTE::Time &t)
335 smpte_time (_transport_frame, t);
339 Session::jack_sync_callback (jack_transport_state_t state,
340 jack_position_t* pos)
342 bool slave = synced_to_jack();
345 case JackTransportStopped:
346 if (slave && _transport_frame != pos->frame && post_transport_work == 0) {
347 request_locate (pos->frame, false);
348 // cerr << "SYNC: stopped, locate to " << pos->frame << " from " << _transport_frame << endl;
354 case JackTransportStarting:
355 // cerr << "SYNC: starting @ " << pos->frame << " a@ " << _transport_frame << " our work = " << post_transport_work << " pos matches ? " << (_transport_frame == pos->frame) << endl;
357 return _transport_frame == pos->frame && post_transport_work == 0;
363 case JackTransportRolling:
364 // cerr << "SYNC: rolling slave = " << slave << endl;
371 error << string_compose (_("Unknown JACK transport state %1 in sync callback"), state)
379 Session::jack_timebase_callback (jack_transport_state_t state,
381 jack_position_t* pos,
388 pos->frame = _transport_frame;
389 pos->valid = JackPositionTimecode;
395 TempoMap::Metric metric (_tempo_map->metric_at (_transport_frame));
396 _tempo_map->bbt_time_with_metric (_transport_frame, bbt, metric);
399 pos->beat = bbt.beats;
400 pos->tick = bbt.ticks;
402 // XXX still need to set bar_start_tick
404 pos->beats_per_bar = metric.meter().beats_per_bar();
405 pos->beat_type = metric.meter().note_divisor();
406 pos->ticks_per_beat = Meter::ticks_per_beat;
407 pos->beats_per_minute = metric.tempo().beats_per_minute();
409 pos->valid = jack_position_bits_t (pos->valid | JackPositionBBT);
412 #ifdef HAVE_JACK_VIDEO_SUPPORT
413 //poke audio video ratio so Ardour can track Video Sync
414 pos->audio_frames_per_video_frame = frame_rate() / Config->get_smpte_frames_per_second ();
415 pos->valid = jack_position_bits_t (pos->valid | JackAudioVideoRatio);
421 t.smpte_offset = _smpte_offset;
422 t.smpte_frame_rate = Config->get_smpte_frames_per_second ();
424 if (_transport_speed) {
428 Location* location = _locations.auto_loop_location();
432 t.transport_state = JackTransportLooping;
433 t.loop_start = location->start();
434 t.loop_end = location->end();
435 t.valid = jack_transport_bits_t (t.valid | JackTransportLoop);
441 t.transport_state = JackTransportRolling;
449 t.transport_state = JackTransportRolling;
459 Session::convert_to_frames_at (nframes_t position, AnyTime& any)
465 return _tempo_map->frame_time ( any.bbt);
469 /* XXX need to handle negative values */
470 secs = any.smpte.hours * 60 * 60;
471 secs += any.smpte.minutes * 60;
472 secs += any.smpte.seconds;
473 secs += any.smpte.frames / Config->get_smpte_frames_per_second ();
474 if (_smpte_offset_negative)
476 return (nframes_t) floor (secs * frame_rate()) - _smpte_offset;
480 return (nframes_t) floor (secs * frame_rate()) + _smpte_offset;
484 case AnyTime::Seconds:
485 return (nframes_t) floor (any.seconds * frame_rate());
488 case AnyTime::Frames: