3 Copyright (C) 1999-2002 Paul Davis
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the Free Software
17 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 #include <ardour/timestamps.h>
28 #include <pbd/error.h>
30 #include <ardour/ardour.h>
31 #include <ardour/configuration.h>
32 #include <ardour/audioengine.h>
33 #include <ardour/session.h>
34 #include <ardour/tempo.h>
38 using namespace ARDOUR;
44 Session::bbt_time (nframes_t when, BBT_Time& bbt)
46 _tempo_map->bbt_time (when, bbt);
52 Session::sync_time_vars ()
54 _current_frame_rate = (nframes_t) round (_base_frame_rate * (1.0 + (Config->get_video_pullup()/100.0)));
55 _frames_per_hour = _current_frame_rate * 3600;
56 _frames_per_smpte_frame = (double) _current_frame_rate / (double) Config->get_smpte_frames_per_second();
57 _smpte_frames_per_hour = (unsigned long) (Config->get_smpte_frames_per_second() * 3600.0);
61 Session::set_smpte_type (float fps, bool drop_frames)
63 Config->set_smpte_frames_per_second (fps);
64 Config->set_smpte_drop_frames (drop_frames);
66 last_smpte_valid = false;
67 // smpte type bits are the middle two in the upper nibble
68 switch ((int) ceil (fps)) {
74 mtc_smpte_bits = 0x20;
80 mtc_smpte_bits = 0x40;
82 mtc_smpte_bits = 0x60;
91 Session::set_smpte_offset (nframes_t off)
94 last_smpte_valid = false;
96 SMPTEOffsetChanged (); /* EMIT SIGNAL */
100 Session::set_smpte_offset_negative (bool neg)
102 _smpte_offset_negative = neg;
103 last_smpte_valid = false;
105 SMPTEOffsetChanged (); /* EMIT SIGNAL */
109 Session::smpte_to_sample( SMPTE::Time& smpte, nframes_t& sample, bool use_offset, bool use_subframes ) const
111 if (Config->get_smpte_drop_frames()) {
112 // The drop frame format was created to better approximate the 30000/1001 = 29.97002997002997....
113 // framerate of NTSC color TV. The used frame rate of drop frame is 29.97, which drifts by about
114 // 0.108 frame per hour, or about 1.3 frames per 12 hours. This is not perfect, but a lot better
115 // than using 30 non drop, which will drift with about 1.8 frame per minute.
116 // Using 29.97, drop frame real time can be accurate only every 10th minute (10 minutes of 29.97 fps
117 // is exactly 17982 frames). One minute is 1798.2 frames, but we count 30 frames per second
118 // (30 * 60 = 1800). This means that at the first minute boundary (at the end of 0:0:59:29) we
119 // are 1.8 frames too late relative to real time. By dropping 2 frames (jumping to 0:1:0:2) we are
120 // approx. 0.2 frames too early. This adds up with 0.2 too early for each minute until we are 1.8
121 // frames too early at 0:9:0:2 (9 * 0.2 = 1.8). The 10th minute brings us 1.8 frames later again
122 // (at end of 0:9:59:29), which sums up to 0 (we are back to zero at 0:10:0:0 :-).
126 // SMPTE value frames offset subframes offset seconds (rounded) 44100 sample (rounded)
127 // 0:00:00:00 0.0 0 0.000 0 (accurate)
128 // 0:00:59:29 1.8 144 60.027 2647177
129 // 0:01:00:02 -0.2 -16 60.060 2648648
130 // 0:01:59:29 1.6 128 120.020 5292883
131 // 0:02:00:02 -0.4 -32 120.053 5294354
132 // 0:02:59:29 1.4 112 180.013 7938588
133 // 0:03:00:02 -0.6 -48 180.047 7940060
134 // 0:03:59:29 1.2 96 240.007 10584294
135 // 0:04:00:02 -0.8 -64 240.040 10585766
136 // 0:04:59:29 1.0 80 300.000 13230000
137 // 0:05:00:02 -1.0 -80 300.033 13231471
138 // 0:05:59:29 0.8 64 359.993 15875706
139 // 0:06:00:02 -1.2 -96 360.027 15877177
140 // 0:06:59:29 0.6 48 419.987 18521411
141 // 0:07:00:02 -1.4 -112 420.020 18522883
142 // 0:07:59:29 0.4 32 478.980 21167117
143 // 0:08:00:02 -1.6 -128 480.013 21168589
144 // 0:08:59:29 0.2 16 539.973 23812823
145 // 0:09:00:02 -1.8 -144 540.007 23814294
146 // 0:09:59:29 0.0+ 0+ 599.967 26458529
147 // 0:10:00:00 0.0 0 600.000 26460000 (accurate)
149 // Per Sigmond <per@sigmond.no>
151 // Samples inside time dividable by 10 minutes (real time accurate)
152 nframes_t base_samples = ((smpte.hours * 60 * 60) + ((smpte.minutes / 10) * 10 * 60)) * frame_rate();
153 // Samples inside time exceeding the nearest 10 minutes (always offset, see above)
154 long exceeding_df_minutes = smpte.minutes % 10;
155 long exceeding_df_seconds = (exceeding_df_minutes * 60) + smpte.seconds;
156 long exceeding_df_frames = (30 * exceeding_df_seconds) + smpte.frames - (2 * exceeding_df_minutes);
157 nframes_t exceeding_samples = (nframes_t) rint(exceeding_df_frames * _frames_per_smpte_frame);
158 sample = base_samples + exceeding_samples;
161 sample = (((smpte.hours * 60 * 60) + (smpte.minutes * 60) + smpte.seconds) * frame_rate()) + (nframes_t)rint(smpte.frames * _frames_per_smpte_frame);
165 sample += (long) (((double)smpte.subframes * _frames_per_smpte_frame) / 80.0);
169 if (smpte_offset_negative()) {
170 if (sample >= smpte_offset()) {
171 sample -= smpte_offset();
173 /* Prevent song-time from becoming negative */
177 if (smpte.negative) {
178 if (sample <= smpte_offset()) {
179 sample = smpte_offset() - sample;
184 sample += smpte_offset();
192 Session::sample_to_smpte( nframes_t sample, SMPTE::Time& smpte, bool use_offset, bool use_subframes ) const
194 nframes_t offset_sample;
197 offset_sample = sample;
198 smpte.negative = false;
200 if (_smpte_offset_negative) {
201 offset_sample = sample + _smpte_offset;
202 smpte.negative = false;
204 if (sample < _smpte_offset) {
205 offset_sample = (_smpte_offset - sample);
206 smpte.negative = true;
208 offset_sample = sample - _smpte_offset;
209 smpte.negative = false;
214 double smpte_frames_left_exact;
215 double smpte_frames_fraction;
216 unsigned long smpte_frames_left;
218 // Extract whole hours. Do this to prevent rounding errors with
219 // high sample numbers in the calculations that follow.
220 smpte.hours = offset_sample / _frames_per_hour;
221 offset_sample = offset_sample % _frames_per_hour;
223 // Calculate exact number of (exceeding) smpte frames and fractional frames
224 smpte_frames_left_exact = (double) offset_sample / _frames_per_smpte_frame;
225 smpte_frames_fraction = smpte_frames_left_exact - floor( smpte_frames_left_exact );
226 smpte.subframes = (long) rint(smpte_frames_fraction * 80.0);
228 // XXX Not sure if this is necessary anymore...
229 if (smpte.subframes == 80) {
230 // This can happen with 24 fps (and 29.97 fps ?)
231 smpte_frames_left_exact = ceil( smpte_frames_left_exact );
235 // Extract hour-exceeding frames for minute, second and frame calculations
236 smpte_frames_left = ((long) floor( smpte_frames_left_exact ));
238 if (Config->get_smpte_drop_frames()) {
239 // See long explanation in smpte_to_sample()...
241 // Number of 10 minute chunks
242 smpte.minutes = (smpte_frames_left / 17982) * 10; // exactly 17982 frames in 10 minutes
243 // frames exceeding the nearest 10 minute barrier
244 long exceeding_df_frames = smpte_frames_left % 17982;
246 // Find minutes exceeding the nearest 10 minute barrier
247 if (exceeding_df_frames >= 1800) { // nothing to do if we are inside the first minute (0-1799)
248 exceeding_df_frames -= 1800; // take away first minute (different number of frames than the others)
249 long extra_minutes_minus_1 = exceeding_df_frames / 1798; // how many minutes after the first one
250 exceeding_df_frames -= extra_minutes_minus_1 * 1798; // take away the (extra) minutes just found
251 smpte.minutes += extra_minutes_minus_1 + 1; // update with exceeding minutes
254 // Adjust frame numbering for dropped frames (frame 0 and 1 skipped at start of every minute except every 10th)
255 if (smpte.minutes % 10) {
256 // Every minute except every 10th
257 if (exceeding_df_frames < 28) {
258 // First second, frames 0 and 1 are skipped
260 smpte.frames = exceeding_df_frames + 2;
262 // All other seconds, all 30 frames are counted
263 exceeding_df_frames -= 28;
264 smpte.seconds = (exceeding_df_frames / 30) + 1;
265 smpte.frames = exceeding_df_frames % 30;
268 // Every 10th minute, all 30 frames counted in all seconds
269 smpte.seconds = exceeding_df_frames / 30;
270 smpte.frames = exceeding_df_frames % 30;
274 smpte.minutes = smpte_frames_left / ((long) Config->get_smpte_frames_per_second () * 60);
275 smpte_frames_left = smpte_frames_left % ((long) Config->get_smpte_frames_per_second () * 60);
276 smpte.seconds = smpte_frames_left / (long) Config->get_smpte_frames_per_second ();
277 smpte.frames = smpte_frames_left % (long) Config->get_smpte_frames_per_second ();
280 if (!use_subframes) {
286 Session::smpte_time (nframes_t when, SMPTE::Time& smpte)
288 if (last_smpte_valid && when == last_smpte_when) {
293 sample_to_smpte( when, smpte, true /* use_offset */, false /* use_subframes */ );
295 last_smpte_when = when;
297 last_smpte_valid = true;
301 Session::smpte_time_subframes (nframes_t when, SMPTE::Time& smpte)
303 if (last_smpte_valid && when == last_smpte_when) {
308 sample_to_smpte( when, smpte, true /* use_offset */, true /* use_subframes */ );
310 last_smpte_when = when;
312 last_smpte_valid = true;
316 Session::smpte_duration (nframes_t when, SMPTE::Time& smpte) const
318 sample_to_smpte( when, smpte, false /* use_offset */, true /* use_subframes */ );
322 Session::smpte_duration_string (char* buf, nframes_t when) const
326 smpte_duration (when, smpte);
327 snprintf (buf, sizeof (buf), "%02" PRIu32 ":%02" PRIu32 ":%02" PRIu32 ":%02" PRIu32, smpte.hours, smpte.minutes, smpte.seconds, smpte.frames);
331 Session::smpte_time (SMPTE::Time &t)
334 smpte_time (_transport_frame, t);
338 Session::jack_sync_callback (jack_transport_state_t state,
339 jack_position_t* pos)
341 bool slave = synced_to_jack();
344 case JackTransportStopped:
345 if (slave && _transport_frame != pos->frame && post_transport_work == 0) {
346 request_locate (pos->frame, false);
347 // cerr << "SYNC: stopped, locate to " << pos->frame << " from " << _transport_frame << endl;
353 case JackTransportStarting:
354 // cerr << "SYNC: starting @ " << pos->frame << " a@ " << _transport_frame << " our work = " << post_transport_work << " pos matches ? " << (_transport_frame == pos->frame) << endl;
356 return _transport_frame == pos->frame && post_transport_work == 0;
362 case JackTransportRolling:
363 // cerr << "SYNC: rolling slave = " << slave << endl;
370 error << string_compose (_("Unknown JACK transport state %1 in sync callback"), state)
378 Session::jack_timebase_callback (jack_transport_state_t state,
380 jack_position_t* pos,
387 pos->frame = _transport_frame;
388 pos->valid = JackPositionTimecode;
394 TempoMap::Metric metric (_tempo_map->metric_at (_transport_frame));
395 _tempo_map->bbt_time_with_metric (_transport_frame, bbt, metric);
398 pos->beat = bbt.beats;
399 pos->tick = bbt.ticks;
401 // XXX still need to set bar_start_tick
403 pos->beats_per_bar = metric.meter().beats_per_bar();
404 pos->beat_type = metric.meter().note_divisor();
405 pos->ticks_per_beat = Meter::ticks_per_beat;
406 pos->beats_per_minute = metric.tempo().beats_per_minute();
408 pos->valid = jack_position_bits_t (pos->valid | JackPositionBBT);
411 #ifdef HAVE_JACK_VIDEO_SUPPORT
412 //poke audio video ratio so Ardour can track Video Sync
413 pos->audio_frames_per_video_frame = frame_rate() / Config->get_smpte_frames_per_second ();
414 pos->valid = jack_position_bits_t (pos->valid | JackAudioVideoRatio);
420 t.smpte_offset = _smpte_offset;
421 t.smpte_frame_rate = Config->get_smpte_frames_per_second ();
423 if (_transport_speed) {
427 Location* location = _locations.auto_loop_location();
431 t.transport_state = JackTransportLooping;
432 t.loop_start = location->start();
433 t.loop_end = location->end();
434 t.valid = jack_transport_bits_t (t.valid | JackTransportLoop);
440 t.transport_state = JackTransportRolling;
448 t.transport_state = JackTransportRolling;
458 Session::convert_to_frames_at (nframes_t position, AnyTime& any)
464 return _tempo_map->frame_time ( any.bbt);
468 /* XXX need to handle negative values */
469 secs = any.smpte.hours * 60 * 60;
470 secs += any.smpte.minutes * 60;
471 secs += any.smpte.seconds;
472 secs += any.smpte.frames / Config->get_smpte_frames_per_second ();
473 if (_smpte_offset_negative)
475 return (nframes_t) floor (secs * frame_rate()) - _smpte_offset;
479 return (nframes_t) floor (secs * frame_rate()) + _smpte_offset;
483 case AnyTime::Seconds:
484 return (nframes_t) floor (any.seconds * frame_rate());
487 case AnyTime::Frames: