2 Copyright (C) 1999-2003 Paul Davis
4 This program is free software; you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation; either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program; if not, write to the Free Software
16 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 #include "libardour-config.h"
29 #include "pbd/error.h"
30 #include "pbd/enumwriter.h"
31 #include "pbd/pthread_utils.h"
32 #include "pbd/memento_command.h"
33 #include "pbd/stacktrace.h"
35 #include "midi++/mmc.h"
36 #include "midi++/port.h"
38 #include "ardour/audioengine.h"
39 #include "ardour/auditioner.h"
40 #include "ardour/automation_watch.h"
41 #include "ardour/butler.h"
42 #include "ardour/click.h"
43 #include "ardour/debug.h"
44 #include "ardour/disk_reader.h"
45 #include "ardour/location.h"
46 #include "ardour/profile.h"
47 #include "ardour/scene_changer.h"
48 #include "ardour/session.h"
49 #include "ardour/slave.h"
50 #include "ardour/tempo.h"
51 #include "ardour/operations.h"
52 #include "ardour/vca.h"
53 #include "ardour/vca_manager.h"
58 using namespace ARDOUR;
62 Session::add_post_transport_work (PostTransportWork ptw)
64 PostTransportWork oldval;
65 PostTransportWork newval;
69 oldval = (PostTransportWork) g_atomic_int_get (&_post_transport_work);
70 newval = PostTransportWork (oldval | ptw);
71 if (g_atomic_int_compare_and_exchange (&_post_transport_work, oldval, newval)) {
77 error << "Could not set post transport work! Crazy thread madness, call the programmers" << endmsg;
81 Session::request_sync_source (Slave* new_slave)
83 SessionEvent* ev = new SessionEvent (SessionEvent::SetSyncSource, SessionEvent::Add, SessionEvent::Immediate, 0, 0.0);
86 seamless = Config->get_seamless_loop ();
88 if (dynamic_cast<Engine_Slave*>(new_slave)) {
89 /* JACK cannot support seamless looping at present */
90 Config->set_seamless_loop (false);
92 /* reset to whatever the value was before we last switched slaves */
93 Config->set_seamless_loop (_was_seamless);
96 /* save value of seamless from before the switch */
97 _was_seamless = seamless;
99 ev->slave = new_slave;
100 DEBUG_TRACE (DEBUG::Slave, "sent request for new slave\n");
105 Session::request_transport_speed (double speed, bool as_default)
107 SessionEvent* ev = new SessionEvent (SessionEvent::SetTransportSpeed, SessionEvent::Add, SessionEvent::Immediate, 0, speed);
108 ev->third_yes_or_no = as_default; // as_default
109 DEBUG_TRACE (DEBUG::Transport, string_compose ("Request transport speed = %1 as default = %2\n", speed, as_default));
113 /** Request a new transport speed, but if the speed parameter is exactly zero then use
114 * a very small +ve value to prevent the transport actually stopping. This method should
115 * be used by callers who are varying transport speed but don't ever want to stop it.
118 Session::request_transport_speed_nonzero (double speed, bool as_default)
124 request_transport_speed (speed, as_default);
128 Session::request_stop (bool abort, bool clear_state)
130 SessionEvent* ev = new SessionEvent (SessionEvent::SetTransportSpeed, SessionEvent::Add, SessionEvent::Immediate, audible_frame(), 0.0, abort, clear_state);
131 DEBUG_TRACE (DEBUG::Transport, string_compose ("Request transport stop, audible %3 transport %4 abort = %1, clear state = %2\n", abort, clear_state, audible_frame(), _transport_frame));
136 Session::request_locate (framepos_t target_frame, bool with_roll)
138 SessionEvent *ev = new SessionEvent (with_roll ? SessionEvent::LocateRoll : SessionEvent::Locate, SessionEvent::Add, SessionEvent::Immediate, target_frame, 0, false);
139 DEBUG_TRACE (DEBUG::Transport, string_compose ("Request locate to %1\n", target_frame));
144 Session::force_locate (framepos_t target_frame, bool with_roll)
146 SessionEvent *ev = new SessionEvent (with_roll ? SessionEvent::LocateRoll : SessionEvent::Locate, SessionEvent::Add, SessionEvent::Immediate, target_frame, 0, true);
147 DEBUG_TRACE (DEBUG::Transport, string_compose ("Request forced locate to %1\n", target_frame));
152 Session::unset_preroll_record_punch ()
154 if (_preroll_record_punch_pos >= 0) {
155 remove_event (_preroll_record_punch_pos, SessionEvent::RecordStart);
157 _preroll_record_punch_pos = -1;
161 Session::unset_preroll_record_trim ()
163 _preroll_record_trim_len = 0;
167 Session::request_preroll_record_punch (framepos_t rec_in, framecnt_t preroll)
169 if (actively_recording ()) {
172 unset_preroll_record_punch ();
173 unset_preroll_record_trim ();
174 framepos_t start = std::max ((framepos_t)0, rec_in - preroll);
176 _preroll_record_punch_pos = rec_in;
177 if (_preroll_record_punch_pos >= 0) {
178 replace_event (SessionEvent::RecordStart, _preroll_record_punch_pos);
179 config.set_punch_in (false);
180 config.set_punch_out (false);
182 maybe_enable_record ();
183 request_locate (start, true);
184 set_requested_return_frame (rec_in);
188 Session::request_preroll_record_trim (framepos_t rec_in, framecnt_t preroll)
190 if (actively_recording ()) {
193 unset_preroll_record_punch ();
194 unset_preroll_record_trim ();
196 config.set_punch_in (false);
197 config.set_punch_out (false);
199 framepos_t pos = std::max ((framepos_t)0, rec_in - preroll);
200 _preroll_record_trim_len = preroll;
201 maybe_enable_record ();
202 request_locate (pos, true);
203 set_requested_return_frame (rec_in);
207 Session::request_count_in_record ()
209 if (actively_recording ()) {
212 if (transport_rolling()) {
215 maybe_enable_record ();
216 _count_in_once = true;
217 request_transport_speed (1.0, true);
221 Session::request_play_loop (bool yn, bool change_transport_roll)
224 // don't attempt to loop when not using Internal Transport
225 // see also gtk2_ardour/ardour_ui_options.cc parameter_changed()
230 Location *location = _locations->auto_loop_location();
233 if (location == 0 && yn) {
234 error << _("Cannot loop - no loop range defined")
239 if (change_transport_roll) {
240 if (transport_rolling()) {
241 /* start looping at current speed */
242 target_speed = transport_speed ();
244 /* currently stopped */
246 /* start looping at normal speed */
253 /* leave the speed alone */
254 target_speed = transport_speed ();
257 ev = new SessionEvent (SessionEvent::SetLoop, SessionEvent::Add, SessionEvent::Immediate, 0, target_speed, yn);
258 DEBUG_TRACE (DEBUG::Transport, string_compose ("Request set loop = %1, change roll state ? %2\n", yn, change_transport_roll));
262 if (!change_transport_roll) {
263 if (!transport_rolling()) {
264 /* we're not changing transport state, but we do want
265 to set up position for the new loop. Don't
266 do this if we're rolling already.
268 request_locate (location->start(), false);
272 if (!change_transport_roll && Config->get_seamless_loop() && transport_rolling()) {
273 // request an immediate locate to refresh the tracks
274 // after disabling looping
275 request_locate (_transport_frame-1, false);
281 Session::request_play_range (list<AudioRange>* range, bool leave_rolling)
283 SessionEvent* ev = new SessionEvent (SessionEvent::SetPlayAudioRange, SessionEvent::Add, SessionEvent::Immediate, 0, (leave_rolling ? 1.0 : 0.0));
285 ev->audio_range = *range;
287 ev->audio_range.clear ();
289 DEBUG_TRACE (DEBUG::Transport, string_compose ("Request play range, leave rolling ? %1\n", leave_rolling));
294 Session::request_cancel_play_range ()
296 SessionEvent* ev = new SessionEvent (SessionEvent::CancelPlayAudioRange, SessionEvent::Add, SessionEvent::Immediate, 0, 0);
302 Session::realtime_stop (bool abort, bool clear_state)
304 DEBUG_TRACE (DEBUG::Transport, string_compose ("realtime stop @ %1\n", _transport_frame));
305 PostTransportWork todo = PostTransportWork (0);
307 /* assume that when we start, we'll be moving forwards */
309 if (_transport_speed < 0.0f) {
310 todo = (PostTransportWork (todo | PostTransportStop | PostTransportReverse));
311 _default_transport_speed = 1.0;
313 todo = PostTransportWork (todo | PostTransportStop);
318 boost::shared_ptr<RouteList> r = routes.reader ();
320 for (RouteList::iterator i = r->begin (); i != r->end(); ++i) {
321 (*i)->realtime_handle_transport_stopped ();
324 DEBUG_TRACE (DEBUG::Transport, string_compose ("stop complete, auto-return scheduled for return to %1\n", _requested_return_frame));
326 /* the duration change is not guaranteed to have happened, but is likely */
328 todo = PostTransportWork (todo | PostTransportDuration);
331 todo = PostTransportWork (todo | PostTransportAbort);
335 todo = PostTransportWork (todo | PostTransportClearSubstate);
339 add_post_transport_work (todo);
342 _clear_event_type (SessionEvent::StopOnce);
343 _clear_event_type (SessionEvent::RangeStop);
344 _clear_event_type (SessionEvent::RangeLocate);
346 /* if we're going to clear loop state, then force disabling record BUT only if we're not doing latched rec-enable */
347 disable_record (true, (!Config->get_latched_record_enable() && clear_state));
349 if (clear_state && !Config->get_loop_is_mode()) {
353 reset_slave_state ();
355 _transport_speed = 0;
356 _target_transport_speed = 0;
358 g_atomic_int_set (&_playback_load, 100);
359 g_atomic_int_set (&_capture_load, 100);
361 if (config.get_use_video_sync()) {
362 waiting_for_sync_offset = true;
365 transport_sub_state = 0;
369 Session::realtime_locate ()
371 boost::shared_ptr<RouteList> r = routes.reader ();
372 for (RouteList::iterator i = r->begin(); i != r->end(); ++i) {
373 (*i)->realtime_locate ();
378 Session::butler_transport_work ()
380 /* Note: this function executes in the butler thread context */
384 PostTransportWork ptw;
385 boost::shared_ptr<RouteList> r = routes.reader ();
388 int on_entry = g_atomic_int_get (&_butler->should_do_transport_work);
390 ptw = post_transport_work();
392 DEBUG_TRACE (DEBUG::Transport, string_compose ("Butler transport work, todo = %1 at %2\n", enum_2_string (ptw), (before = g_get_monotonic_time())));
395 if (ptw & PostTransportLocate) {
397 if (get_play_loop() && !Config->get_seamless_loop()) {
399 DEBUG_TRACE (DEBUG::Butler, "flush loop recording fragment to disk\n");
401 /* this locate might be happening while we are
404 * Non-seamless looping will require a locate (below) that
405 * will reset capture buffers and throw away data.
407 * Rather than first find all tracks and see if they
408 * have outstanding data, just do a flush anyway. It
409 * may be cheaper this way anyway, and is certainly
413 bool more_disk_io_to_do = false;
417 more_disk_io_to_do = _butler->flush_tracks_to_disk_after_locate (r, errors);
423 if (more_disk_io_to_do) {
432 if (ptw & PostTransportAdjustPlaybackBuffering) {
433 for (RouteList::iterator i = r->begin(); i != r->end(); ++i) {
434 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
436 tr->adjust_playback_buffering ();
437 /* and refill those buffers ... */
439 (*i)->non_realtime_locate (_transport_frame);
441 VCAList v = _vca_manager->vcas ();
442 for (VCAList::const_iterator i = v.begin(); i != v.end(); ++i) {
443 (*i)->non_realtime_locate (_transport_frame);
447 if (ptw & PostTransportAdjustCaptureBuffering) {
448 for (RouteList::iterator i = r->begin(); i != r->end(); ++i) {
449 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
451 tr->adjust_capture_buffering ();
456 if (ptw & PostTransportCurveRealloc) {
457 for (RouteList::iterator i = r->begin(); i != r->end(); ++i) {
458 (*i)->curve_reallocate();
462 if (ptw & PostTransportSpeed) {
463 non_realtime_set_speed ();
466 if (ptw & PostTransportReverse) {
469 cumulative_rf_motion = 0;
472 /* don't seek if locate will take care of that in non_realtime_stop() */
474 if (!(ptw & PostTransportLocate)) {
475 for (RouteList::iterator i = r->begin(); i != r->end(); ++i) {
476 (*i)->non_realtime_locate (_transport_frame);
478 if (on_entry != g_atomic_int_get (&_butler->should_do_transport_work)) {
479 /* new request, stop seeking, and start again */
480 g_atomic_int_dec_and_test (&_butler->should_do_transport_work);
484 VCAList v = _vca_manager->vcas ();
485 for (VCAList::const_iterator i = v.begin(); i != v.end(); ++i) {
486 (*i)->non_realtime_locate (_transport_frame);
491 if (ptw & PostTransportLocate) {
492 DEBUG_TRACE (DEBUG::Transport, "nonrealtime locate invoked from BTW\n");
493 non_realtime_locate ();
496 if (ptw & PostTransportStop) {
497 non_realtime_stop (ptw & PostTransportAbort, on_entry, finished);
499 g_atomic_int_dec_and_test (&_butler->should_do_transport_work);
504 if (ptw & PostTransportOverWrite) {
505 non_realtime_overwrite (on_entry, finished);
507 g_atomic_int_dec_and_test (&_butler->should_do_transport_work);
512 if (ptw & PostTransportAudition) {
513 non_realtime_set_audition ();
516 g_atomic_int_dec_and_test (&_butler->should_do_transport_work);
518 DEBUG_TRACE (DEBUG::Transport, string_compose (X_("Butler transport work all done after %1 usecs @ %2 trw = %3\n"), g_get_monotonic_time() - before, _transport_frame, _butler->transport_work_requested()));
522 Session::non_realtime_set_speed ()
524 boost::shared_ptr<RouteList> rl = routes.reader();
525 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
526 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
528 tr->non_realtime_speed_change ();
534 Session::non_realtime_overwrite (int on_entry, bool& finished)
536 boost::shared_ptr<RouteList> rl = routes.reader();
537 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
538 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
539 if (tr && tr->pending_overwrite ()) {
540 tr->overwrite_existing_buffers ();
542 if (on_entry != g_atomic_int_get (&_butler->should_do_transport_work)) {
551 Session::non_realtime_locate ()
553 DEBUG_TRACE (DEBUG::Transport, string_compose ("locate tracks to %1\n", _transport_frame));
555 if (Config->get_loop_is_mode() && get_play_loop()) {
557 Location *loc = _locations->auto_loop_location();
559 if (!loc || (_transport_frame < loc->start() || _transport_frame >= loc->end())) {
560 /* jumped out of loop range: stop tracks from looping,
561 but leave loop (mode) enabled.
563 set_track_loop (false);
565 } else if (loc && Config->get_seamless_loop() &&
566 ((loc->start() <= _transport_frame) ||
567 (loc->end() > _transport_frame) ) ) {
569 /* jumping to start of loop. This might have been done before but it is
570 * idempotent and cheap. Doing it here ensures that when we start playback
571 * outside the loop we still flip tracks into the magic seamless mode
574 set_track_loop (true);
577 set_track_loop (false);
582 /* no more looping .. should have been noticed elsewhere */
589 boost::shared_ptr<RouteList> rl = routes.reader();
592 gint sc = g_atomic_int_get (&_seek_counter);
593 tf = _transport_frame;
595 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
596 (*i)->non_realtime_locate (tf);
597 if (sc != g_atomic_int_get (&_seek_counter)) {
604 /* VCAs are quick to locate because they have no data (except
605 automation) associated with them. Don't bother with a
606 restart mechanism here, but do use the same transport frame
607 that the Routes used.
609 VCAList v = _vca_manager->vcas ();
610 for (VCAList::const_iterator i = v.begin(); i != v.end(); ++i) {
611 (*i)->non_realtime_locate (tf);
615 _scene_changer->locate (_transport_frame);
617 /* XXX: it would be nice to generate the new clicks here (in the non-RT thread)
618 rather than clearing them so that the RT thread has to spend time constructing
619 them (in Session::click).
624 #ifdef USE_TRACKS_CODE_FEATURES
626 Session::select_playhead_priority_target (framepos_t& jump_to)
630 AutoReturnTarget autoreturn = Config->get_auto_return_target_list ();
636 if (Profile->get_trx() && transport_rolling() ) {
637 // We're playing, so do nothing.
638 // Next stop will put us where we need to be.
642 /* Note that the order of checking each AutoReturnTarget flag defines
643 the priority each flag.
645 Ardour/Mixbus: Last Locate
650 Tracks: Range Selection
656 if (autoreturn & RangeSelectionStart) {
657 if (!_range_selection.empty()) {
658 jump_to = _range_selection.from;
660 if (transport_rolling ()) {
661 /* Range selection no longer exists, but we're playing,
662 so do nothing. Next stop will put us where
670 if (jump_to < 0 && (autoreturn & Loop) && get_play_loop()) {
671 /* don't try to handle loop play when synced to JACK */
673 if (!synced_to_engine()) {
674 Location *location = _locations->auto_loop_location();
677 jump_to = location->start();
679 if (Config->get_seamless_loop()) {
680 /* need to get track buffers reloaded */
681 set_track_loop (true);
687 if (jump_to < 0 && (autoreturn & RegionSelectionStart)) {
688 if (!_object_selection.empty()) {
689 jump_to = _object_selection.from;
693 if (jump_to < 0 && (autoreturn & LastLocate)) {
694 jump_to = _last_roll_location;
702 Session::select_playhead_priority_target (framepos_t& jump_to)
704 if (config.get_external_sync() || !config.get_auto_return()) {
708 jump_to = _last_roll_location;
715 Session::follow_playhead_priority ()
719 if (select_playhead_priority_target (target)) {
720 request_locate (target);
725 Session::non_realtime_stop (bool abort, int on_entry, bool& finished)
731 PostTransportWork ptw = post_transport_work();
736 boost::shared_ptr<RouteList> rl = routes.reader();
737 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
738 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
739 if (tr && tr->get_captured_frames () != 0) {
745 /* stop and locate are merged here because they share a lot of common stuff */
748 now = localtime (&xnow);
751 auditioner->cancel_audition ();
754 cumulative_rf_motion = 0;
758 begin_reversible_command (Operations::capture);
759 _have_captured = true;
762 DEBUG_TRACE (DEBUG::Transport, X_("Butler PTW: DS stop\n"));
764 if (abort && did_record) {
765 /* no reason to save the session file when we remove sources
767 _state_of_the_state = StateOfTheState (_state_of_the_state|InCleanup);
770 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
771 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
773 tr->transport_stopped_wallclock (*now, xnow, abort);
777 if (abort && did_record) {
778 _state_of_the_state = StateOfTheState (_state_of_the_state & ~InCleanup);
781 boost::shared_ptr<RouteList> r = routes.reader ();
783 for (RouteList::iterator i = r->begin(); i != r->end(); ++i) {
784 if (!(*i)->is_auditioner()) {
785 (*i)->set_pending_declick (0);
790 commit_reversible_command ();
791 /* increase take name */
792 if (config.get_track_name_take () && !config.get_take_name ().empty()) {
793 string newname = config.get_take_name();
794 config.set_take_name(bump_name_number (newname));
798 if (_engine.running()) {
799 PostTransportWork ptw = post_transport_work ();
801 for (RouteList::iterator i = r->begin(); i != r->end(); ++i) {
802 (*i)->non_realtime_transport_stop (_transport_frame, !(ptw & PostTransportLocate) || pending_locate_flush);
804 VCAList v = _vca_manager->vcas ();
805 for (VCAList::const_iterator i = v.begin(); i != v.end(); ++i) {
806 (*i)->non_realtime_transport_stop (_transport_frame, !(ptw & PostTransportLocate) || pending_locate_flush);
809 update_latency_compensation ();
812 bool const auto_return_enabled = (!config.get_external_sync() && (Config->get_auto_return_target_list() || abort));
814 if (auto_return_enabled ||
815 (ptw & PostTransportLocate) ||
816 (_requested_return_frame >= 0) ||
817 synced_to_engine()) {
819 if (pending_locate_flush) {
820 flush_all_inserts ();
823 // rg: what is the logic behind this case?
824 // _requested_return_frame should be ignored when synced_to_engine/slaved.
825 // currently worked around in MTC_Slave by forcing _requested_return_frame to -1
827 if ((auto_return_enabled || synced_to_engine() || _requested_return_frame >= 0) &&
828 !(ptw & PostTransportLocate)) {
830 /* no explicit locate queued */
832 bool do_locate = false;
834 if (_requested_return_frame >= 0) {
836 /* explicit return request pre-queued in event list. overrides everything else */
838 _transport_frame = _requested_return_frame;
844 if (select_playhead_priority_target (jump_to)) {
846 _transport_frame = jump_to;
851 _transport_frame = _last_roll_location;
856 _requested_return_frame = -1;
859 _engine.transport_locate (_transport_frame);
866 unset_preroll_record_trim ();
868 /* do this before seeking, because otherwise the tracks will do the wrong thing in seamless loop mode.
871 if (ptw & PostTransportClearSubstate) {
873 if (!Config->get_loop_is_mode()) {
878 /* this for() block can be put inside the previous if() and has the effect of ... ??? what */
881 DEBUG_TRACE (DEBUG::Transport, X_("Butler PTW: locate\n"));
882 for (RouteList::iterator i = r->begin(); i != r->end(); ++i) {
883 DEBUG_TRACE (DEBUG::Transport, string_compose ("Butler PTW: locate on %1\n", (*i)->name()));
884 (*i)->non_realtime_locate (_transport_frame);
886 if (on_entry != g_atomic_int_get (&_butler->should_do_transport_work)) {
888 /* we will be back */
895 VCAList v = _vca_manager->vcas ();
896 for (VCAList::const_iterator i = v.begin(); i != v.end(); ++i) {
897 (*i)->non_realtime_locate (_transport_frame);
903 /* don't bother with this stuff if we're disconnected from the engine,
904 because there will be no process callbacks to deliver stuff from
907 if (_engine.connected() && !_engine.freewheeling()) {
908 // need to queue this in the next RT cycle
909 _send_timecode_update = true;
911 if (!dynamic_cast<MTC_Slave*>(_slave)) {
912 send_immediate_mmc (MIDI::MachineControlCommand (MIDI::MachineControl::cmdStop));
914 /* This (::non_realtime_stop()) gets called by main
915 process thread, which will lead to confusion
916 when calling AsyncMIDIPort::write().
918 Something must be done. XXX
920 send_mmc_locate (_transport_frame);
924 if ((ptw & PostTransportLocate) && get_record_enabled()) {
925 /* This is scheduled by realtime_stop(), which is also done
926 * when a slave requests /locate/ for an initial sync.
927 * We can't hold up the slave for long with a save() here,
928 * without breaking its initial sync cycle.
930 * save state only if there's no slave or if it's not yet locked.
932 if (!_slave || !_slave->locked()) {
933 DEBUG_TRACE (DEBUG::Transport, X_("Butler PTW: requests save\n"));
934 SaveSessionRequested (_current_snapshot_name);
939 /* always try to get rid of this */
941 remove_pending_capture_state ();
943 /* save the current state of things if appropriate */
945 if (did_record && !saved) {
946 SaveSessionRequested (_current_snapshot_name);
949 if (ptw & PostTransportStop) {
951 if (!Config->get_loop_is_mode()) {
956 PositionChanged (_transport_frame); /* EMIT SIGNAL */
957 DEBUG_TRACE (DEBUG::Transport, string_compose ("send TSC with speed = %1\n", _transport_speed));
958 TransportStateChange (); /* EMIT SIGNAL */
959 AutomationWatch::instance().transport_stop_automation_watches (_transport_frame);
961 /* and start it up again if relevant */
963 if ((ptw & PostTransportLocate) && !config.get_external_sync() && pending_locate_roll) {
964 request_transport_speed (1.0);
967 /* Even if we didn't do a pending locate roll this time, we don't want it hanging
968 around for next time.
970 pending_locate_roll = false;
974 Session::check_declick_out ()
976 bool locate_required = transport_sub_state & PendingLocate;
978 /* this is called after a process() iteration. if PendingDeclickOut was set,
979 it means that we were waiting to declick the output (which has just been
980 done) before maybe doing something else. this is where we do that "something else".
982 note: called from the audio thread.
985 if (transport_sub_state & PendingDeclickOut) {
987 if (locate_required) {
988 start_locate (pending_locate_frame, pending_locate_roll, pending_locate_flush);
989 transport_sub_state &= ~(PendingDeclickOut|PendingLocate);
991 if (!(transport_sub_state & StopPendingCapture)) {
992 stop_transport (pending_abort);
993 transport_sub_state &= ~(PendingDeclickOut|PendingLocate);
997 } else if (transport_sub_state & PendingLoopDeclickOut) {
998 /* Nothing else to do here; we've declicked, and the loop event will be along shortly */
999 transport_sub_state &= ~PendingLoopDeclickOut;
1004 Session::unset_play_loop ()
1008 clear_events (SessionEvent::AutoLoop);
1009 clear_events (SessionEvent::AutoLoopDeclick);
1010 set_track_loop (false);
1013 if (Config->get_seamless_loop()) {
1014 /* likely need to flush track buffers: this will locate us to wherever we are */
1015 add_post_transport_work (PostTransportLocate);
1016 _butler->schedule_transport_work ();
1022 Session::set_track_loop (bool yn)
1024 Location* loc = _locations->auto_loop_location ();
1030 boost::shared_ptr<RouteList> rl = routes.reader ();
1032 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
1033 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
1034 if (tr && !tr->is_private_route()) {
1035 tr->set_loop (yn ? loc : 0);
1041 Session::set_play_loop (bool yn, double speed)
1043 /* Called from event-handling context */
1047 if (yn == play_loop || (actively_recording() && yn) || (loc = _locations->auto_loop_location()) == 0) {
1048 /* nothing to do, or can't change loop status while recording */
1052 if (yn && Config->get_seamless_loop() && synced_to_engine()) {
1053 warning << string_compose (
1054 _("Seamless looping cannot be supported while %1 is using JACK transport.\n"
1055 "Recommend changing the configured options"), PROGRAM_NAME)
1063 have_looped = false;
1067 unset_play_range ();
1069 if (Config->get_seamless_loop()) {
1070 if (!Config->get_loop_is_mode()) {
1071 /* set all tracks to use internal looping */
1072 set_track_loop (true);
1074 /* we will do this in the locate to the start OR when we hit the end
1075 * of the loop for the first time
1079 /* set all tracks to NOT use internal looping */
1080 set_track_loop (false);
1083 /* Put the delick and loop events in into the event list. The declick event will
1084 cause a de-clicking fade-out just before the end of the loop, and it will also result
1085 in a fade-in when the loop restarts. The AutoLoop event will peform the actual loop.
1090 auto_loop_declick_range (loc, dcp, dcl);
1091 merge_event (new SessionEvent (SessionEvent::AutoLoopDeclick, SessionEvent::Replace, dcp, dcl, 0.0f));
1092 merge_event (new SessionEvent (SessionEvent::AutoLoop, SessionEvent::Replace, loc->end(), loc->start(), 0.0f));
1094 /* if requested to roll, locate to start of loop and
1095 * roll but ONLY if we're not already rolling.
1097 args: positition, roll=true, flush=true, with_loop=false, force buffer refill if seamless looping
1100 if (Config->get_loop_is_mode()) {
1101 /* loop IS a transport mode: if already
1102 rolling, do not locate to loop start.
1104 if (!transport_rolling() && (speed != 0.0)) {
1105 start_locate (loc->start(), true, true, false, true);
1109 start_locate (loc->start(), true, true, false, true);
1119 DEBUG_TRACE (DEBUG::Transport, string_compose ("send TSC2 with speed = %1\n", _transport_speed));
1120 TransportStateChange ();
1123 Session::flush_all_inserts ()
1125 boost::shared_ptr<RouteList> r = routes.reader ();
1127 for (RouteList::iterator i = r->begin(); i != r->end(); ++i) {
1128 (*i)->flush_processors ();
1133 Session::start_locate (framepos_t target_frame, bool with_roll, bool with_flush, bool for_loop_enabled, bool force)
1135 if (target_frame < 0) {
1136 error << _("Locate called for negative sample position - ignored") << endmsg;
1140 if (synced_to_engine()) {
1145 _slave->speed_and_position (sp, pos);
1147 if (target_frame != pos) {
1149 if (config.get_jack_time_master()) {
1150 /* actually locate now, since otherwise jack_timebase_callback
1151 will use the incorrect _transport_frame and report an old
1152 and incorrect time to Jack transport
1154 locate (target_frame, with_roll, with_flush, for_loop_enabled, force);
1157 /* tell JACK to change transport position, and we will
1158 follow along later in ::follow_slave()
1161 _engine.transport_locate (target_frame);
1163 if (sp != 1.0f && with_roll) {
1164 _engine.transport_start ();
1170 locate (target_frame, with_roll, with_flush, for_loop_enabled, force);
1175 Session::micro_locate (framecnt_t distance)
1177 boost::shared_ptr<RouteList> rl = routes.reader();
1178 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
1179 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
1180 if (tr && !tr->can_internal_playback_seek (distance)) {
1185 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
1186 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
1188 tr->internal_playback_seek (distance);
1192 _transport_frame += distance;
1196 /** @param with_mmc true to send a MMC locate command when the locate is done */
1198 Session::locate (framepos_t target_frame, bool with_roll, bool with_flush, bool for_loop_enabled, bool force, bool with_mmc)
1200 bool need_butler = false;
1202 /* Locates for seamless looping are fairly different from other
1203 * locates. They assume that the diskstream buffers for each track
1204 * already have the correct data in them, and thus there is no need to
1205 * actually tell the tracks to locate. What does need to be done,
1206 * though, is all the housekeeping that is associated with non-linear
1207 * changes in the value of _transport_frame.
1210 DEBUG_TRACE (DEBUG::Transport, string_compose ("rt-locate to %1, roll %2 flush %3 loop-enabled %4 force %5 mmc %6\n",
1211 target_frame, with_roll, with_flush, for_loop_enabled, force, with_mmc));
1213 if (!force && _transport_frame == target_frame && !loop_changing && !for_loop_enabled) {
1215 /* already at the desired position. Not forced to locate,
1216 the loop isn't changing, so unless we're told to
1217 start rolling also, there's nothing to do but
1218 tell the world where we are (again).
1222 set_transport_speed (1.0, 0, false);
1224 loop_changing = false;
1225 Located (); /* EMIT SIGNAL */
1229 if (_transport_speed && !(for_loop_enabled && Config->get_seamless_loop())) {
1230 /* Schedule a declick. We'll be called again when its done.
1231 We only do it this way for ordinary locates, not those
1232 due to **seamless** loops.
1235 if (!(transport_sub_state & PendingDeclickOut)) {
1236 transport_sub_state |= (PendingDeclickOut|PendingLocate);
1237 pending_locate_frame = target_frame;
1238 pending_locate_roll = with_roll;
1239 pending_locate_flush = with_flush;
1240 cerr << "Declick scheduled ... back soon\n";
1245 cerr << "... now doing the actual locate\n";
1247 // Update Timecode time
1248 _transport_frame = target_frame;
1249 // Bump seek counter so that any in-process locate in the butler
1250 // thread(s?) can restart.
1251 g_atomic_int_inc (&_seek_counter);
1252 _last_roll_or_reversal_location = target_frame;
1253 timecode_time(_transport_frame, transmitting_timecode_time);
1255 /* do "stopped" stuff if:
1257 * we are rolling AND
1258 * no autoplay in effect AND
1259 * we're not going to keep rolling after the locate AND
1260 * !(playing a loop with JACK sync)
1264 bool transport_was_stopped = !transport_rolling();
1266 if (!transport_was_stopped && (!auto_play_legal || !config.get_auto_play()) && !with_roll && !(synced_to_engine() && play_loop) &&
1267 (!Profile->get_trx() || !(config.get_external_sync() && !synced_to_engine()))) {
1268 realtime_stop (false, true); // XXX paul - check if the 2nd arg is really correct
1269 transport_was_stopped = true;
1271 /* otherwise tell the world that we located */
1275 if (force || !for_loop_enabled || loop_changing) {
1277 PostTransportWork todo = PostTransportLocate;
1279 if (with_roll && transport_was_stopped) {
1280 todo = PostTransportWork (todo | PostTransportRoll);
1283 add_post_transport_work (todo);
1288 /* this is functionally what clear_clicks() does but with a tentative lock */
1290 Glib::Threads::RWLock::WriterLock clickm (click_lock, Glib::Threads::TRY_LOCK);
1292 if (clickm.locked()) {
1294 for (Clicks::iterator i = clicks.begin(); i != clicks.end(); ++i) {
1303 /* switch from input if we're going to roll */
1304 if (Config->get_monitoring_model() == HardwareMonitoring) {
1305 set_track_monitor_input_status (!config.get_auto_input());
1308 /* otherwise we're going to stop, so do the opposite */
1309 if (Config->get_monitoring_model() == HardwareMonitoring) {
1310 set_track_monitor_input_status (true);
1314 /* cancel looped playback if transport pos outside of loop range */
1317 Location* al = _locations->auto_loop_location();
1320 if (_transport_frame < al->start() || _transport_frame >= al->end()) {
1322 // located outside the loop: cancel looping directly, this is called from event handling context
1324 have_looped = false;
1326 if (!Config->get_loop_is_mode()) {
1327 set_play_loop (false, _transport_speed);
1329 if (Config->get_seamless_loop()) {
1330 /* this will make the non_realtime_locate() in the butler
1331 which then causes seek() in tracks actually do the right
1334 set_track_loop (false);
1338 } else if (_transport_frame == al->start()) {
1340 // located to start of loop - this is looping, basically
1344 if (_last_roll_location != al->start()) {
1345 /* didn't start at loop start - playback must have
1346 * started before loop since we've now hit the loop
1349 add_post_transport_work (PostTransportLocate);
1355 boost::shared_ptr<RouteList> rl = routes.reader();
1357 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
1358 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
1360 if (tr && tr->rec_enable_control()->get_value()) {
1361 // tell it we've looped, so it can deal with the record state
1362 tr->transport_looped (_transport_frame);
1367 TransportLooped(); // EMIT SIGNAL
1373 _butler->schedule_transport_work ();
1376 loop_changing = false;
1378 _send_timecode_update = true;
1381 send_mmc_locate (_transport_frame);
1384 _last_roll_location = _last_roll_or_reversal_location = _transport_frame;
1385 if (!synced_to_engine () || _transport_frame == _engine.transport_frame ()) {
1386 Located (); /* EMIT SIGNAL */
1390 /** Set the transport speed.
1391 * Called from the process thread.
1392 * @param speed New speed
1395 Session::set_transport_speed (double speed, framepos_t destination_frame, bool abort, bool clear_state, bool as_default)
1397 DEBUG_TRACE (DEBUG::Transport, string_compose ("@ %5 Set transport speed to %1, abort = %2 clear_state = %3, current = %4 as_default %6\n",
1398 speed, abort, clear_state, _transport_speed, _transport_frame, as_default));
1400 if (_transport_speed == speed) {
1401 if (as_default && speed == 0.0) { // => reset default transport speed. hacky or what?
1402 _default_transport_speed = 1.0;
1407 if (actively_recording() && speed != 1.0 && speed != 0.0) {
1408 /* no varispeed during recording */
1409 DEBUG_TRACE (DEBUG::Transport, string_compose ("No varispeed during recording cur_speed %1, frame %2\n",
1410 _transport_speed, _transport_frame));
1414 _target_transport_speed = fabs(speed);
1416 /* 8.0 max speed is somewhat arbitrary but based on guestimates regarding disk i/o capability
1417 and user needs. We really need CD-style "skip" playback for ffwd and rewind.
1421 speed = min (8.0, speed);
1422 } else if (speed < 0) {
1423 speed = max (-8.0, speed);
1426 if (transport_rolling() && speed == 0.0) {
1428 /* we are rolling and we want to stop */
1430 if (Config->get_monitoring_model() == HardwareMonitoring) {
1431 set_track_monitor_input_status (true);
1434 if (synced_to_engine ()) {
1436 /* do this here because our response to the slave won't
1439 _play_range = false;
1440 _count_in_once = false;
1443 _engine.transport_stop ();
1445 bool const auto_return_enabled = (!config.get_external_sync() && (Config->get_auto_return_target_list() || abort));
1447 if (!auto_return_enabled) {
1448 _requested_return_frame = destination_frame;
1451 stop_transport (abort);
1454 } else if (transport_stopped() && speed == 1.0) {
1456 _default_transport_speed = speed;
1458 /* we are stopped and we want to start rolling at speed 1 */
1460 if (Config->get_loop_is_mode() && play_loop) {
1462 Location *location = _locations->auto_loop_location();
1464 if (location != 0) {
1465 if (_transport_frame != location->start()) {
1467 if (Config->get_seamless_loop()) {
1468 /* force tracks to do their thing */
1469 set_track_loop (true);
1472 /* jump to start and then roll from there */
1474 request_locate (location->start(), true);
1480 if (Config->get_monitoring_model() == HardwareMonitoring && config.get_auto_input()) {
1481 set_track_monitor_input_status (false);
1484 if (synced_to_engine()) {
1485 _engine.transport_start ();
1486 _count_in_once = false;
1493 /* not zero, not 1.0 ... varispeed */
1495 if ((synced_to_engine()) && speed != 0.0 && speed != 1.0) {
1496 warning << string_compose (
1497 _("Global varispeed cannot be supported while %1 is connected to JACK transport control"),
1503 if (actively_recording()) {
1507 if (speed > 0.0 && _transport_frame == current_end_frame()) {
1511 if (speed < 0.0 && _transport_frame == 0) {
1517 /* if we are reversing relative to the current speed, or relative to the speed
1518 before the last stop, then we have to do extra work.
1521 PostTransportWork todo = PostTransportWork (0);
1523 if ((_transport_speed && speed * _transport_speed < 0.0) || (_last_transport_speed * speed < 0.0) || (_last_transport_speed == 0.0 && speed < 0.0)) {
1524 todo = PostTransportWork (todo | PostTransportReverse);
1525 _last_roll_or_reversal_location = _transport_frame;
1528 _last_transport_speed = _transport_speed;
1529 _transport_speed = speed;
1532 _default_transport_speed = speed;
1535 boost::shared_ptr<RouteList> rl = routes.reader();
1536 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
1537 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
1538 if (tr && tr->realtime_speed_change()) {
1539 todo = PostTransportWork (todo | PostTransportSpeed);
1544 add_post_transport_work (todo);
1545 _butler->schedule_transport_work ();
1548 DEBUG_TRACE (DEBUG::Transport, string_compose ("send TSC3 with speed = %1\n", _transport_speed));
1550 /* throttle signal emissions.
1551 * when slaved [_last]_transport_speed
1552 * usually changes every cycle (tiny amounts due to DLL).
1553 * Emitting a signal every cycle is overkill and unwarranted.
1555 * Using _last_transport_speed is not acceptable,
1556 * since it allows for large changes over a long period
1557 * of time. Hence we introduce a dedicated variable to keep track
1559 * The 0.2% dead-zone is somewhat arbitrary. Main use-case
1560 * for TransportStateChange() here is the ShuttleControl display.
1562 if (fabs (_signalled_varispeed - speed) > .002
1563 // still, signal hard changes to 1.0 and 0.0:
1564 || ( speed == 1.0 && _signalled_varispeed != 1.0)
1565 || ( speed == 0.0 && _signalled_varispeed != 0.0)
1568 TransportStateChange (); /* EMIT SIGNAL */
1569 _signalled_varispeed = speed;
1575 /** Stop the transport. */
1577 Session::stop_transport (bool abort, bool clear_state)
1579 _count_in_once = false;
1580 if (_transport_speed == 0.0f) {
1584 DEBUG_TRACE (DEBUG::Transport, string_compose ("stop_transport, declick required? %1\n", get_transport_declick_required()));
1586 if (!get_transport_declick_required()) {
1588 /* stop has not yet been scheduled */
1590 boost::shared_ptr<RouteList> rl = routes.reader();
1591 framepos_t stop_target = audible_frame();
1593 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
1594 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
1596 tr->prepare_to_stop (_transport_frame, stop_target);
1602 if (actively_recording() && /* we are recording */
1603 worst_input_latency() > current_block_size) { /* input latency exceeds block size, so simple 1 cycle delay before stop is not enough */
1605 /* we need to capture the audio that is still somewhere in the pipeline between
1606 wherever it was generated and the process callback. This means that even though
1607 the user (or something else) has asked us to stop, we have to roll
1608 past this point and then reset the playhead/transport location to
1609 the position at which the stop was requested.
1611 we still need playback to "stop" now, however, which is why we schedule
1615 DEBUG_TRACE (DEBUG::Transport, string_compose ("stop transport requested @ %1, scheduled for + %2 = %3, abort = %4\n",
1616 _transport_frame, _worst_input_latency,
1617 _transport_frame + _worst_input_latency,
1620 SessionEvent *ev = new SessionEvent (SessionEvent::StopOnce, SessionEvent::Replace,
1621 _transport_frame + _worst_input_latency,
1626 /* request a declick at the start of the next process cycle() so that playback ceases.
1627 It will remain silent until we actually stop (at the StopOnce event somewhere in
1628 the future). The extra flag (StopPendingCapture) is set to ensure that check_declick_out()
1629 does not stop the transport too early.
1631 new_bits = SubState (PendingDeclickOut|StopPendingCapture);
1635 /* Not recording, schedule a declick in the next process() cycle and then stop at its end */
1637 new_bits = PendingDeclickOut;
1638 DEBUG_TRACE (DEBUG::Transport, string_compose ("stop scheduled for next process cycle @ %1\n", _transport_frame));
1641 /* we'll be called again after the declick */
1642 transport_sub_state = SubState (transport_sub_state|new_bits);
1643 pending_abort = abort;
1649 DEBUG_TRACE (DEBUG::Transport, "time to actually stop\n");
1651 /* declick was scheduled, but we've been called again, which means it is really time to stop
1653 XXX: we should probably split this off into its own method and call it explicitly.
1656 realtime_stop (abort, clear_state);
1657 _butler->schedule_transport_work ();
1661 /** Called from the process thread */
1663 Session::start_transport ()
1665 DEBUG_TRACE (DEBUG::Transport, "start_transport\n");
1667 _last_roll_location = _transport_frame;
1668 _last_roll_or_reversal_location = _transport_frame;
1670 have_looped = false;
1672 /* if record status is Enabled, move it to Recording. if its
1673 already Recording, move it to Disabled.
1676 switch (record_status()) {
1678 if (!config.get_punch_in() && !preroll_record_punch_enabled()) {
1685 disable_record (false);
1693 transport_sub_state |= PendingDeclickIn;
1695 _transport_speed = _default_transport_speed;
1696 _target_transport_speed = _transport_speed;
1698 boost::shared_ptr<RouteList> rl = routes.reader();
1699 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
1700 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
1702 tr->realtime_speed_change ();
1706 if (!_engine.freewheeling()) {
1707 Timecode::Time time;
1708 timecode_time_subframes (_transport_frame, time);
1709 if (!dynamic_cast<MTC_Slave*>(_slave)) {
1710 send_immediate_mmc (MIDI::MachineControlCommand (MIDI::MachineControl::cmdDeferredPlay));
1713 if (actively_recording() && click_data && (config.get_count_in () || _count_in_once)) {
1714 _count_in_once = false;
1715 /* calculate count-in duration (in audio samples)
1716 * - use [fixed] tempo/meter at _transport_frame
1717 * - calc duration of 1 bar + time-to-beat before or at transport_frame
1719 const Tempo& tempo = _tempo_map->tempo_at_frame (_transport_frame);
1720 const Meter& meter = _tempo_map->meter_at_frame (_transport_frame);
1722 const double num = meter.divisions_per_bar ();
1723 const double den = meter.note_divisor ();
1724 const double barbeat = _tempo_map->exact_qn_at_frame (_transport_frame, 0) * den / (4. * num);
1725 const double bar_fract = fmod (barbeat, 1.0); // fraction of bar elapsed.
1727 _count_in_samples = meter.frames_per_bar (tempo, _current_frame_rate);
1729 double dt = _count_in_samples / num;
1730 if (bar_fract == 0) {
1731 /* at bar boundary, count-in 2 bars before start. */
1732 _count_in_samples *= 2;
1734 /* beats left after full bar until roll position */
1735 _count_in_samples *= 1. + bar_fract;
1739 framepos_t cf = _transport_frame - _count_in_samples;
1740 while (cf < _transport_frame) {
1741 add_click (cf - _worst_track_latency, clickbeat == 0);
1743 clickbeat = fmod (clickbeat + 1, num);
1748 DEBUG_TRACE (DEBUG::Transport, string_compose ("send TSC4 with speed = %1\n", _transport_speed));
1749 TransportStateChange (); /* EMIT SIGNAL */
1752 /** Do any transport work in the audio thread that needs to be done after the
1753 * transport thread is finished. Audio thread, realtime safe.
1756 Session::post_transport ()
1758 PostTransportWork ptw = post_transport_work ();
1760 if (ptw & PostTransportAudition) {
1761 if (auditioner && auditioner->auditioning()) {
1762 process_function = &Session::process_audition;
1764 process_function = &Session::process_with_events;
1768 if (ptw & PostTransportStop) {
1770 transport_sub_state = 0;
1773 if (ptw & PostTransportLocate) {
1775 if (((!config.get_external_sync() && (auto_play_legal && config.get_auto_play())) && !_exporting) || (ptw & PostTransportRoll)) {
1776 _count_in_once = false;
1779 transport_sub_state = 0;
1784 /* XXX is this really safe? shouldn't we just be unsetting the bits that we actually
1787 set_post_transport_work (PostTransportWork (0));
1791 Session::reset_rf_scale (framecnt_t motion)
1793 cumulative_rf_motion += motion;
1795 if (cumulative_rf_motion < 4 * _current_frame_rate) {
1797 } else if (cumulative_rf_motion < 8 * _current_frame_rate) {
1799 } else if (cumulative_rf_motion < 16 * _current_frame_rate) {
1811 Session::mtc_status_changed (bool yn)
1813 g_atomic_int_set (&_mtc_active, yn);
1814 MTCSyncStateChanged( yn );
1818 Session::ltc_status_changed (bool yn)
1820 g_atomic_int_set (&_ltc_active, yn);
1821 LTCSyncStateChanged( yn );
1825 Session::use_sync_source (Slave* new_slave)
1827 /* Runs in process() context */
1829 bool non_rt_required = false;
1831 /* XXX this deletion is problematic because we're in RT context */
1837 /* slave change, reset any DiskIO block on disk output because it is no
1838 longer valid with a new slave.
1840 DiskReader::set_no_disk_output (false);
1842 MTC_Slave* mtc_slave = dynamic_cast<MTC_Slave*>(_slave);
1844 mtc_slave->ActiveChanged.connect_same_thread (mtc_status_connection, boost::bind (&Session::mtc_status_changed, this, _1));
1845 MTCSyncStateChanged(mtc_slave->locked() );
1847 if (g_atomic_int_get (&_mtc_active) ){
1848 g_atomic_int_set (&_mtc_active, 0);
1849 MTCSyncStateChanged( false );
1851 mtc_status_connection.disconnect ();
1854 LTC_Slave* ltc_slave = dynamic_cast<LTC_Slave*> (_slave);
1856 ltc_slave->ActiveChanged.connect_same_thread (ltc_status_connection, boost::bind (&Session::ltc_status_changed, this, _1));
1857 LTCSyncStateChanged (ltc_slave->locked() );
1859 if (g_atomic_int_get (&_ltc_active) ){
1860 g_atomic_int_set (&_ltc_active, 0);
1861 LTCSyncStateChanged( false );
1863 ltc_status_connection.disconnect ();
1866 DEBUG_TRACE (DEBUG::Slave, string_compose ("set new slave to %1\n", _slave));
1868 // need to queue this for next process() cycle
1869 _send_timecode_update = true;
1871 boost::shared_ptr<RouteList> rl = routes.reader();
1872 for (RouteList::iterator i = rl->begin(); i != rl->end(); ++i) {
1873 boost::shared_ptr<Track> tr = boost::dynamic_pointer_cast<Track> (*i);
1874 if (tr && !tr->is_private_route()) {
1875 if (tr->realtime_speed_change()) {
1876 non_rt_required = true;
1878 tr->set_slaved (_slave != 0);
1882 if (non_rt_required) {
1883 add_post_transport_work (PostTransportSpeed);
1884 _butler->schedule_transport_work ();
1891 Session::drop_sync_source ()
1893 request_sync_source (0);
1897 Session::switch_to_sync_source (SyncSource src)
1901 DEBUG_TRACE (DEBUG::Slave, string_compose ("Setting up sync source %1\n", enum_2_string (src)));
1905 if (_slave && dynamic_cast<MTC_Slave*>(_slave)) {
1910 new_slave = new MTC_Slave (*this, *_midi_ports->mtc_input_port());
1913 catch (failed_constructor& err) {
1919 if (_slave && dynamic_cast<LTC_Slave*>(_slave)) {
1924 new_slave = new LTC_Slave (*this);
1927 catch (failed_constructor& err) {
1934 if (_slave && dynamic_cast<MIDIClock_Slave*>(_slave)) {
1939 new_slave = new MIDIClock_Slave (*this, *_midi_ports->midi_clock_input_port(), 24);
1942 catch (failed_constructor& err) {
1948 if (_slave && dynamic_cast<Engine_Slave*>(_slave)) {
1952 if (config.get_video_pullup() != 0.0f) {
1956 new_slave = new Engine_Slave (*AudioEngine::instance());
1964 request_sync_source (new_slave);
1968 Session::unset_play_range ()
1970 _play_range = false;
1971 _clear_event_type (SessionEvent::RangeStop);
1972 _clear_event_type (SessionEvent::RangeLocate);
1976 Session::set_play_range (list<AudioRange>& range, bool leave_rolling)
1980 /* Called from event-processing context */
1982 unset_play_range ();
1984 if (range.empty()) {
1985 /* _play_range set to false in unset_play_range()
1987 if (!leave_rolling) {
1988 /* stop transport */
1989 SessionEvent* ev = new SessionEvent (SessionEvent::SetTransportSpeed, SessionEvent::Add, SessionEvent::Immediate, 0, 0.0f, false);
1997 /* cancel loop play */
2000 list<AudioRange>::size_type sz = range.size();
2004 list<AudioRange>::iterator i = range.begin();
2005 list<AudioRange>::iterator next;
2007 while (i != range.end()) {
2012 /* locating/stopping is subject to delays for declicking.
2015 framepos_t requested_frame = i->end;
2017 if (requested_frame > current_block_size) {
2018 requested_frame -= current_block_size;
2020 requested_frame = 0;
2023 if (next == range.end()) {
2024 ev = new SessionEvent (SessionEvent::RangeStop, SessionEvent::Add, requested_frame, 0, 0.0f);
2026 ev = new SessionEvent (SessionEvent::RangeLocate, SessionEvent::Add, requested_frame, (*next).start, 0.0f);
2034 } else if (sz == 1) {
2036 ev = new SessionEvent (SessionEvent::RangeStop, SessionEvent::Add, range.front().end, 0, 0.0f);
2041 /* save range so we can do auto-return etc. */
2043 current_audio_range = range;
2045 /* now start rolling at the right place */
2047 ev = new SessionEvent (SessionEvent::LocateRoll, SessionEvent::Add, SessionEvent::Immediate, range.front().start, 0.0f, false);
2050 DEBUG_TRACE (DEBUG::Transport, string_compose ("send TSC5 with speed = %1\n", _transport_speed));
2051 TransportStateChange ();
2055 Session::request_bounded_roll (framepos_t start, framepos_t end)
2057 AudioRange ar (start, end, 0);
2058 list<AudioRange> lar;
2061 request_play_range (&lar, true);
2065 Session::set_requested_return_frame (framepos_t return_to)
2067 _requested_return_frame = return_to;
2071 Session::request_roll_at_and_return (framepos_t start, framepos_t return_to)
2073 SessionEvent *ev = new SessionEvent (SessionEvent::LocateRollLocate, SessionEvent::Add, SessionEvent::Immediate, return_to, 1.0);
2074 ev->target2_frame = start;
2079 Session::engine_halted ()
2083 /* there will be no more calls to process(), so
2084 we'd better clean up for ourselves, right now.
2086 but first, make sure the butler is out of
2094 realtime_stop (false, true);
2095 non_realtime_stop (false, 0, ignored);
2096 transport_sub_state = 0;
2098 DEBUG_TRACE (DEBUG::Transport, string_compose ("send TSC6 with speed = %1\n", _transport_speed));
2099 TransportStateChange (); /* EMIT SIGNAL */
2104 Session::xrun_recovery ()
2108 Xrun (_transport_frame); /* EMIT SIGNAL */
2110 if (Config->get_stop_recording_on_xrun() && actively_recording()) {
2112 /* it didn't actually halt, but we need
2113 to handle things in the same way.
2121 Session::route_processors_changed (RouteProcessorChange c)
2123 if (g_atomic_int_get (&_ignore_route_processor_changes) > 0) {
2127 if (c.type == RouteProcessorChange::MeterPointChange) {
2132 if (c.type == RouteProcessorChange::RealTimeChange) {
2137 update_latency_compensation ();
2144 Session::allow_auto_play (bool yn)
2146 auto_play_legal = yn;
2150 Session::maybe_stop (framepos_t limit)
2152 if ((_transport_speed > 0.0f && _transport_frame >= limit) || (_transport_speed < 0.0f && _transport_frame == 0)) {
2153 if (synced_to_engine () && config.get_jack_time_master ()) {
2154 _engine.transport_stop ();
2155 } else if (!synced_to_engine ()) {
2164 Session::send_mmc_locate (framepos_t t)
2170 if (!_engine.freewheeling()) {
2171 Timecode::Time time;
2172 timecode_time_subframes (t, time);
2173 send_immediate_mmc (MIDI::MachineControlCommand (time));
2177 /** Ask the transport to not send timecode until further notice. The suspension
2178 * will come into effect some finite time after this call, and timecode_transmission_suspended()
2179 * should be checked by the caller to find out when.
2182 Session::request_suspend_timecode_transmission ()
2184 SessionEvent* ev = new SessionEvent (SessionEvent::SetTimecodeTransmission, SessionEvent::Add, SessionEvent::Immediate, 0, 0, false);
2189 Session::request_resume_timecode_transmission ()
2191 SessionEvent* ev = new SessionEvent (SessionEvent::SetTimecodeTransmission, SessionEvent::Add, SessionEvent::Immediate, 0, 0, true);
2196 Session::timecode_transmission_suspended () const
2198 return g_atomic_int_get (&_suspend_timecode_transmission) == 1;