, return_to_vpot_mode_display_at (UINT64_MAX)
, eq_band (-1)
, _pan_mode (PanAzimuthAutomation)
- , _trim_mode (TrimAutomation)
- , vpot_parameter (PanAzimuthAutomation)
, _last_gain_position_written (-1.0)
, _last_pan_azi_position_written (-1.0)
, _last_pan_width_position_written (-1.0)
, _last_trim_position_written (-1.0)
- , _current_send (0)
{
_fader = dynamic_cast<Fader*> (Fader::factory (*_surface, index, "fader", *this));
_vpot = dynamic_cast<Pot*> (Pot::factory (*_surface, Pot::ID + index, "vpot", *this));
_route = r;
- control_by_parameter.clear ();
-
- control_by_parameter[PanAzimuthAutomation] = (Control*) 0;
- control_by_parameter[PanWidthAutomation] = (Control*) 0;
- control_by_parameter[PanElevationAutomation] = (Control*) 0;
- control_by_parameter[PanFrontBackAutomation] = (Control*) 0;
- control_by_parameter[PanLFEAutomation] = (Control*) 0;
- control_by_parameter[GainAutomation] = (Control*) 0;
- control_by_parameter[TrimAutomation] = (Control*) 0;
- control_by_parameter[PhaseAutomation] = (Control*) 0;
-
reset_saved_values ();
if (!r) {
_route->mute_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_mute_changed, this), ui_context());
- if (_route->trim() && route()->trim()->active()) {
- _route->trim_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trim_changed, this, false), ui_context());
- }
-
- if (_route->phase_invert().size()) {
- _route->phase_invert_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_phase_changed, this, false), ui_context());
- _route->phase_control()->set_channel(0);
- }
-
boost::shared_ptr<AutomationControl> pan_control = _route->pan_azimuth_control();
if (pan_control) {
pan_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_azi_changed, this, false), ui_context());
possible_pot_parameters.push_back (PanLFEAutomation);
}
- if (_route->trim() && route()->trim()->active()) {
- possible_pot_parameters.push_back (TrimAutomation);
- }
-
- possible_trim_parameters.clear();
+ _pan_mode = PanAzimuthAutomation;
- if (_route->trim() && route()->trim()->active()) {
- possible_trim_parameters.push_back (TrimAutomation);
- _trim_mode = TrimAutomation;
+ if (_surface->mcp().subview_mode() == MackieControlProtocol::None) {
+ set_vpot_parameter (_pan_mode);
}
- if (_route->phase_invert().size()) {
- possible_trim_parameters.push_back (PhaseAutomation);
- _route->phase_control()->set_channel(0);
- if (_trim_mode != TrimAutomation) {
- _trim_mode = PhaseAutomation;
- }
- }
- _current_send = 0;
- /* Update */
- _pan_mode = PanAzimuthAutomation;
- potmode_changed (false);
- notify_all ();
+ _fader->set_control (_route->gain_control());
+ notify_all ();
}
void
notify_panner_azi_changed ();
notify_panner_width_changed ();
notify_record_enable_changed ();
- notify_trim_changed ();
- notify_phase_changed ();
notify_processor_changed ();
}
void
Strip::notify_gain_changed (bool force_update)
{
- if (_route) {
-
- Control* control;
-
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- control = _vpot;
- } else {
- control = _fader;
- }
-
- boost::shared_ptr<AutomationControl> ac = _route->gain_control();
-
- float gain_coefficient = ac->get_value();
- float normalized_position = ac->internal_to_interface (gain_coefficient);
-
- if (force_update || normalized_position != _last_gain_position_written) {
-
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- if (!control->in_use()) {
- _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
- }
- do_parameter_display (GainAutomation, gain_coefficient);
- } else {
- if (!control->in_use()) {
- _surface->write (_fader->set_position (normalized_position));
- }
- do_parameter_display (GainAutomation, gain_coefficient);
- }
-
- _last_gain_position_written = normalized_position;
- }
+ if (!_route) {
+ return;
}
-}
-
-void
-Strip::notify_trim_changed (bool force_update)
-{
- if (_route) {
-
- if (!_route->trim() || !route()->trim()->active()) {
- return;
- }
- Control* control = 0;
- ControlParameterMap::iterator i = control_by_parameter.find (TrimAutomation);
-
- if (i == control_by_parameter.end()) {
- return;
- }
-
- control = i->second;
- boost::shared_ptr<AutomationControl> ac = _route->trim_control();
+ boost::shared_ptr<AutomationControl> ac = _route->gain_control();
+ Control* control;
- float gain_coefficient = ac->get_value();
- float normalized_position = ac->internal_to_interface (gain_coefficient);
-
- if (force_update || normalized_position != _last_trim_position_written) {
- if (control == _fader) {
- if (!_fader->in_use()) {
- _surface->write (_fader->set_position (normalized_position));
- do_parameter_display (TrimAutomation, gain_coefficient);
- }
- } else if (control == _vpot) {
- _surface->write (_vpot->set (normalized_position, true, Pot::dot));
- do_parameter_display (TrimAutomation, gain_coefficient);
- }
- _last_trim_position_written = normalized_position;
- }
+ if (!ac) {
+ /* doesn't seem possible but lets be safe */
+ return;
}
-}
-void
-Strip::notify_phase_changed (bool force_update)
-{
- if (_route) {
- if (!_route->phase_invert().size()) {
- return;
- }
-
- Control* control = 0;
- ControlParameterMap::iterator i = control_by_parameter.find (PhaseAutomation);
+ /* track gain control could be on vpot or fader, depending in
+ * flip mode.
+ */
- if (i == control_by_parameter.end()) {
- return;
- }
+ if (_vpot->control() == ac) {
+ control = _vpot;
+ } else if (_fader->control() == ac) {
+ control = _fader;
+ } else {
+ return;
+ }
- control = i->second;
+ float gain_coefficient = ac->get_value();
+ float normalized_position = ac->internal_to_interface (gain_coefficient);
- float normalized_position = _route->phase_control()->get_value();
+ if (force_update || normalized_position != _last_gain_position_written) {
- if (control == _fader) {
- if (!_fader->in_use()) {
+ if (!control->in_use()) {
+ if (control == _vpot) {
+ _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
+ } else {
_surface->write (_fader->set_position (normalized_position));
- do_parameter_display (PhaseAutomation, normalized_position);
}
- } else if (control == _vpot) {
- _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
- do_parameter_display (PhaseAutomation, normalized_position);
}
+
+ do_parameter_display (GainAutomation, gain_coefficient);
+ _last_gain_position_written = normalized_position;
}
}
}
if (_surface->mcp().subview_mode() != MackieControlProtocol::Sends) {
- /* no longer in EQ subview mode */
+ /* no longer in Sends subview mode */
return;
}
if (control) {
float val = control->get_value();
- do_parameter_display (type, control->internal_to_interface (val));
+ do_parameter_display (type, val);
+
+ if (_vpot->control() == control) {
+ /* update pot/encoder */
+ _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
+ }
+ }
+}
+
+void
+Strip::notify_trackview_change (AutomationType type, uint32_t send_num, bool force_update)
+{
+ boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+
+ if (!r) {
+ /* not in subview mode */
+ return;
+ }
+
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::TrackView) {
+ /* no longer in TrackViewsubview mode */
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> control;
+ boost::shared_ptr<Track> track = boost::dynamic_pointer_cast<Track> (r);
+
+ switch (type) {
+ case TrimAutomation:
+ control = r->trim_control();
+ break;
+ case SoloIsolateAutomation:
+ control = r->solo_isolate_control ();
+ break;
+ case SoloSafeAutomation:
+ control = r->solo_safe_control ();
+ break;
+ case MonitoringAutomation:
+ if (track) {
+ control = track->monitoring_control();
+ }
+ break;
+ case PhaseAutomation:
+ control = r->phase_control ();
+ break;
+ default:
+ break;
+ }
+
+ if (control) {
+ float val = control->get_value();
+
+ /* Note: all of the displayed controllables require the display
+ * of their *actual* ("internal") value, not the version mapped
+ * into the normalized 0..1.0 ("interface") range.
+ */
+
+ do_parameter_display (type, val);
/* update pot/encoder */
_surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
}
boost::shared_ptr<AutomationControl> pan_control = _route->pan_azimuth_control ();
if (!pan_control) {
+ /* basically impossible, since we're here because that control
+ * changed, but sure, whatever.
+ */
return;
}
- Control* control = 0;
- ControlParameterMap::iterator i = control_by_parameter.find (PanAzimuthAutomation);
-
- if (i == control_by_parameter.end()) {
+ if (_vpot->control() != pan_control) {
return;
}
- control = i->second;
-
double normalized_pos = pan_control->internal_to_interface (pan_control->get_value());
double internal_pos = pan_control->get_value();
if (force_update || (normalized_pos != _last_pan_azi_position_written)) {
- if (control == _fader) {
- if (!_fader->in_use()) {
- _surface->write (_fader->set_position (normalized_pos));
- /* show actual internal value to user */
- do_parameter_display (PanAzimuthAutomation, internal_pos);
- }
- } else if (control == _vpot) {
- _surface->write (_vpot->set (normalized_pos, true, Pot::dot));
- /* show actual internal value to user */
- do_parameter_display (PanAzimuthAutomation, internal_pos);
- }
+ _surface->write (_vpot->set (normalized_pos, true, Pot::dot));
+ /* show actual internal value to user */
+ do_parameter_display (PanAzimuthAutomation, internal_pos);
_last_pan_azi_position_written = normalized_pos;
}
boost::shared_ptr<AutomationControl> pan_control = _route->pan_width_control ();
if (!pan_control) {
+ /* basically impossible, since we're here because that control
+ * changed, but sure, whatever.
+ */
return;
}
- Control* control = 0;
- ControlParameterMap::iterator i = control_by_parameter.find (PanWidthAutomation);
-
- if (i == control_by_parameter.end()) {
+ if (_vpot->control() != pan_control) {
return;
}
- control = i->second;
-
double pos = pan_control->internal_to_interface (pan_control->get_value());
if (force_update || pos != _last_pan_width_position_written) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
-
- if (control == _fader) {
- if (!control->in_use()) {
- _surface->write (_fader->set_position (pos));
- do_parameter_display (PanWidthAutomation, pos);
- }
- }
-
- } else if (control == _vpot) {
- _surface->write (_vpot->set (pos, true, Pot::spread));
- do_parameter_display (PanWidthAutomation, pos);
- }
+ _surface->write (_vpot->set (pos, true, Pot::spread));
+ do_parameter_display (PanWidthAutomation, pos);
_last_pan_width_position_written = pos;
}
return;
}
+ Controllable::GroupControlDisposition gcd;
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
+ }
+
if (control->toggled()) {
if (control->toggled()) {
- control->set_value (!control->get_value(), Controllable::NoGroup);
+ control->set_value (!control->get_value(), gcd);
+ }
+
+ } else if (control->desc().enumeration || control->desc().integer_step) {
+
+ double val = control->get_value ();
+ if (val <= control->upper() - 1.0) {
+ control->set_value (val + 1.0, gcd);
+ } else {
+ control->set_value (control->lower(), gcd);
}
}
+
} else {
- /* Send mode: press enables/disables the relevant send */
+ /* Send mode: press enables/disables the relevant
+ * send, but the vpot is bound to the send-level so we
+ * need to lookup the enable/disable control
+ * explicitly.
+ */
boost::shared_ptr<Route> r = _surface->mcp().subview_route();
if (control) {
bool currently_enabled = (bool) control->get_value();
- control->set_value (!currently_enabled, Controllable::UseGroup);
+ Controllable::GroupControlDisposition gcd;
+
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
+ }
+
+ control->set_value (!currently_enabled, gcd);
if (currently_enabled) {
/* we just turned it off */
} else {
+#ifdef MIXBUS
+ if (_route) {
+ boost::shared_ptr<AutomationControl> ac = _route->master_send_enable_controllable ();
+ if (ac) {
+ Controllable::GroupControlDisposition gcd;
+
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
+ }
+
+ bool enabled = ac->get_value();
+ ac->set_value (!enabled, gcd);
+ }
+ }
+#else
DEBUG_TRACE (DEBUG::MackieControl, "switching to next pot mode\n");
+ /* switch vpot to control next available parameter */
next_pot_mode ();
+#endif
}
}
Controllable::GroupControlDisposition gcd;
if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
- gcd = Controllable::NoGroup;
+ gcd = Controllable::InverseGroup;
} else {
gcd = Controllable::UseGroup;
}
switch (type) {
case GainAutomation:
+ case BusSendLevel:
if (val == 0.0) {
pending_display[1] = " -inf ";
} else {
case PhaseAutomation:
if (_route) {
- if (_route->phase_control()->get_value() < 0.5) {
+ if (val < 0.5) {
pending_display[1] = "Normal";
} else {
pending_display[1] = "Invert";
}
break;
- case BusSendLevel:
- if (_route) {
- float dB = accurate_coefficient_to_dB (val);
- snprintf (buf, sizeof (buf), "%6.1f", dB);
- pending_display[1] = buf;
- screen_hold = true;
- }
- break;
-
case EQGain:
case EQFrequency:
case EQQ:
pending_display[1] = _surface->mcp().subview_route()->comp_mode_name (val);
}
break;
+ case SoloSafeAutomation:
+ case SoloIsolateAutomation:
+ if (val >= 0.5) {
+ pending_display[1] = "on";
+ } else {
+ pending_display[1] = "off";
+ }
+ break;
+ case MonitoringAutomation:
+ switch (MonitorChoice ((int) val)) {
+ case MonitorAuto:
+ pending_display[1] = "auto";
+ break;
+ case MonitorInput:
+ pending_display[1] = "input";
+ break;
+ case MonitorDisk:
+ pending_display[1] = "disk";
+ break;
+ case MonitorCue: /* XXX not implemented as of jan 2016 */
+ pending_display[1] = "cue";
+ break;
+ }
+ break;
default:
break;
}
Controllable::GroupControlDisposition gcd = Controllable::UseGroup;
if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
- gcd = Controllable::NoGroup;
+ gcd = Controllable::InverseGroup;
}
fader.set_value (position, gcd);
if (!ac) {
return;
}
- double p = pot.get_value ();
- p += delta;
- // fader and pot should be the same and fader is hard coded 0 -> 1
- p = max (0.0, p);
- p = min (1.0, p);
- pot.set_value (p);
+
+ Controllable::GroupControlDisposition gcd;
+
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
+ }
+
+ if (ac->toggled()) {
+
+ /* make it like a single-step, directional switch */
+
+ if (delta > 0) {
+ ac->set_value (1.0, gcd);
+ } else {
+ ac->set_value (0.0, gcd);
+ }
+
+ } else if (ac->desc().enumeration || ac->desc().integer_step) {
+
+ /* use Controllable::get_value() to avoid the
+ * "scaling-to-interface" that takes place in
+ * Control::get_value() via the pot member.
+ *
+ * an enumeration with 4 values will have interface values of
+ * 0.0, 0.25, 0.5 and 0.75 or some similar oddness. Lets not
+ * deal with that.
+ */
+
+ if (delta > 0) {
+ ac->set_value (min (ac->upper(), ac->get_value() + 1.0), gcd);
+ } else {
+ ac->set_value (max (ac->lower(), ac->get_value() - 1.0), gcd);
+ }
+
+ } else {
+
+ double p = ac->get_value();
+
+ p += delta;
+
+ p = max (ac->lower(), p);
+ p = min (ac->upper(), p);
+
+ ac->set_value (p, gcd);
+ }
}
void
notify_panner_width_changed (false);
}
}
-
- if (_route->trim() && route()->trim()->active()) {
- ARDOUR::AutoState trim_state = _route->trim_control()->automation_state();
- if (trim_state == Touch || trim_state == Play) {
- notify_trim_changed (false);
- }
- }
}
void
string
Strip::vpot_mode_string ()
{
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return string();
+ }
+
boost::shared_ptr<AutomationControl> ac = _vpot->control();
+
if (!ac) {
return string();
}
- if (control_by_parameter.find (GainAutomation)->second == _vpot) {
- return "Fader";
- } else if (control_by_parameter.find (TrimAutomation)->second == _vpot) {
- return "Trim";
- } else if (control_by_parameter.find (PhaseAutomation)->second == _vpot) {
- return string_compose ("Phase%1", _route->phase_control()->channel() + 1);
- } else if (control_by_parameter.find (PanAzimuthAutomation)->second == _vpot) {
+ switch (ac->desc().type) {
+ case PanAzimuthAutomation:
return "Pan";
- } else if (control_by_parameter.find (PanWidthAutomation)->second == _vpot) {
+ case PanWidthAutomation:
return "Width";
- } else if (control_by_parameter.find (PanElevationAutomation)->second == _vpot) {
+ case PanElevationAutomation:
return "Elev";
- } else if (control_by_parameter.find (PanFrontBackAutomation)->second == _vpot) {
+ case PanFrontBackAutomation:
return "F/Rear";
- } else if (control_by_parameter.find (PanLFEAutomation)->second == _vpot) {
+ case PanLFEAutomation:
return "LFE";
- }
-
- if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
- return string();
+ default:
+ break;
}
return "???";
}
- void
-Strip::potmode_changed (bool notify)
+void
+Strip::flip_mode_changed ()
{
- if (!_route) {
- return;
- }
+ if (_surface->mcp().subview_mode() == MackieControlProtocol::Sends) {
- // WIP
- int pm = _surface->mcp().pot_mode();
- switch (pm) {
- case MackieControlProtocol::Pan:
- // This needs to set current pan mode (azimuth or width... or whatever)
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Assign pot to Pan mode %1\n", enum_2_string (_pan_mode)));
- set_vpot_parameter (_pan_mode);
- break;
- case MackieControlProtocol::Trim:
- DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Trim mode.\n");
- set_vpot_parameter (_trim_mode);
- break;
- }
+ boost::shared_ptr<AutomationControl> pot_control = _vpot->control();
+ boost::shared_ptr<AutomationControl> fader_control = _fader->control();
+
+ if (pot_control && fader_control) {
+ _vpot->set_control (fader_control);
+ _fader->set_control (pot_control);
+ }
+
+ if (_surface->mcp().flip_mode() == MackieControlProtocol::Normal) {
+ do_parameter_display (GainAutomation, fader_control->get_value());
+ } else {
+ do_parameter_display (BusSendLevel, fader_control->get_value());
+ }
+
+ /* update fader */
+
+ _surface->write (_fader->set_position (pot_control->internal_to_interface (pot_control->get_value ())));
+
+ /* update pot */
+
+ _surface->write (_vpot->set (fader_control->internal_to_interface (fader_control->get_value()), true, Pot::wrap));
- if (notify) {
- notify_all ();
+
+ } else {
+ /* do nothing */
}
}
}
- if (_surface->mcp().pot_mode() == MackieControlProtocol::Pan) {
-
- if (possible_pot_parameters.empty() || (possible_pot_parameters.size() == 1 && possible_pot_parameters.front() == ac->parameter().type())) {
- return;
- }
-
- for (i = possible_pot_parameters.begin(); i != possible_pot_parameters.end(); ++i) {
- if ((*i) == ac->parameter().type()) {
- break;
- }
- }
-
- /* move to the next mode in the list, or back to the start (which will
- also happen if the current mode is not in the current pot mode list)
- */
-
- if (i != possible_pot_parameters.end()) {
- ++i;
- }
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return;
+ }
- if (i == possible_pot_parameters.end()) {
- i = possible_pot_parameters.begin();
- }
+ if (possible_pot_parameters.empty() || (possible_pot_parameters.size() == 1 && possible_pot_parameters.front() == ac->parameter().type())) {
+ return;
+ }
- set_vpot_parameter (*i);
- } else if (_surface->mcp().pot_mode() == MackieControlProtocol::Trim) {
- if (possible_trim_parameters.empty() || (possible_trim_parameters.size() == 1 && possible_trim_parameters.front() == ac->parameter().type())) {
- return;
+ for (i = possible_pot_parameters.begin(); i != possible_pot_parameters.end(); ++i) {
+ if ((*i) == ac->parameter().type()) {
+ break;
}
+ }
- for (i = possible_trim_parameters.begin(); i != possible_trim_parameters.end(); ++i) {
- if ((*i) == ac->parameter().type()) {
- break;
- }
- }
- if ((*i) == PhaseAutomation && _route->phase_invert().size() > 1) {
- // There are more than one channel of phase
- if ((_route->phase_control()->channel() + 1) < _route->phase_invert().size()) {
- _route->phase_control()->set_channel(_route->phase_control()->channel() + 1);
- set_vpot_parameter (*i);
- return;
- } else {
- _route->phase_control()->set_channel(0);
- }
- }
- /* move to the next mode in the list, or back to the start (which will
- also happen if the current mode is not in the current pot mode list)
- */
+ /* move to the next mode in the list, or back to the start (which will
+ also happen if the current mode is not in the current pot mode list)
+ */
- if (i != possible_trim_parameters.end()) {
- ++i;
- }
+ if (i != possible_pot_parameters.end()) {
+ ++i;
+ }
- if (i == possible_trim_parameters.end()) {
- i = possible_trim_parameters.begin();
- }
- set_vpot_parameter (*i);
+ if (i == possible_pot_parameters.end()) {
+ i = possible_pot_parameters.begin();
}
+
+ set_vpot_parameter (*i);
}
void
switch (_surface->mcp().subview_mode()) {
case MackieControlProtocol::None:
- set_vpot_parameter (vpot_parameter);
+ set_vpot_parameter (_pan_mode);
/* need to show strip name again */
show_route_name ();
notify_metering_state_changed ();
}
eq_band = -1;
break;
+ case MackieControlProtocol::TrackView:
+ if (r) {
+ setup_trackview_vpot (r);
+ } else {
+ /* leave it as it was */
+ }
+ eq_band = -1;
+ break;
}
}
notify_send_level_change (BusSendLevel, global_pos, true);
}
+void
+Strip::setup_trackview_vpot (boost::shared_ptr<Route> r)
+{
+ if (!r) {
+ return;
+ }
+
+ const uint32_t global_pos = _surface->mcp().global_index (*this);
+
+ if (global_pos >= 8) {
+ pending_display[0] = string();
+ pending_display[1] = string();
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> pc;
+ boost::shared_ptr<Track> track = boost::dynamic_pointer_cast<Track> (r);
+ string label;
+
+ switch (global_pos) {
+ case 0:
+ pc = r->trim_control ();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, TrimAutomation, global_pos, false), ui_context());
+ pending_display[0] = "Trim";
+ notify_trackview_change (TrimAutomation, global_pos, true);
+ }
+ break;
+ case 1:
+ if (track) {
+ pc = track->monitoring_control();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, MonitoringAutomation, global_pos, false), ui_context());
+ pending_display[0] = "Mon";
+ notify_trackview_change (MonitoringAutomation, global_pos, true);
+ }
+ }
+ break;
+ case 2:
+ pc = r->solo_isolate_control ();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, SoloIsolateAutomation, global_pos, false), ui_context());
+ notify_trackview_change (SoloIsolateAutomation, global_pos, true);
+ pending_display[0] = "S-Iso";
+ }
+ break;
+ case 3:
+ pc = r->solo_safe_control ();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, SoloSafeAutomation, global_pos, false), ui_context());
+ notify_trackview_change (SoloSafeAutomation, global_pos, true);
+ pending_display[0] = "S-Safe";
+ }
+ break;
+ case 4:
+ pc = r->phase_control();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, PhaseAutomation, global_pos, false), ui_context());
+ notify_trackview_change (PhaseAutomation, global_pos, true);
+ pending_display[0] = "Phase";
+ }
+ break;
+ case 5:
+ // pc = r->trim_control ();
+ break;
+ case 6:
+ // pc = r->trim_control ();
+ break;
+ case 7:
+ // pc = r->trim_control ();
+ break;
+ }
+
+ if (!pc) {
+ pending_display[0] = string();
+ pending_display[1] = string();
+ return;
+ }
+
+ _vpot->set_control (pc);
+}
+
void
Strip::set_vpot_parameter (AutomationType p)
{
if (!_route || (p == NullAutomation)) {
- control_by_parameter[vpot_parameter] = 0;
- vpot_parameter = NullAutomation;
_vpot->set_control (boost::shared_ptr<AutomationControl>());
pending_display[1] = string();
return;
reset_saved_values ();
- /* unset any mapping between the vpot and any existing parameters */
-
- for (ControlParameterMap::iterator i = control_by_parameter.begin(); i != control_by_parameter.end(); ++i) {
-
- if (i != control_by_parameter.end() && i->second == _vpot) {
- i->second = 0;
- }
- }
-
switch (p) {
case PanAzimuthAutomation:
- if ((pan_control = _route->pan_azimuth_control ())) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- _pan_mode = PanAzimuthAutomation;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, pan azi to fader */
- _vpot->set_control (_route->gain_control());
- vpot_parameter = GainAutomation;
- control_by_parameter[GainAutomation] = _vpot;
- _fader->set_control (pan_control);
- control_by_parameter[PanAzimuthAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanAzimuthAutomation] = 0;
- }
- } else {
- /* gain to fader, pan azi to vpot */
- vpot_parameter = PanAzimuthAutomation;
- _fader->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _fader;
- _vpot->set_control (pan_control);
- control_by_parameter[PanAzimuthAutomation] = _vpot;
- }
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanAzimuthAutomation] = 0;
- }
+ pan_control = _route->pan_azimuth_control ();
break;
-
case PanWidthAutomation:
- if ((pan_control = _route->pan_width_control ())) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- _pan_mode = PanWidthAutomation;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, pan width to fader */
- _vpot->set_control (_route->gain_control());
- vpot_parameter = GainAutomation;
- control_by_parameter[GainAutomation] = _vpot;
- _fader->set_control (pan_control);
- control_by_parameter[PanWidthAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanWidthAutomation] = 0;
- }
- } else {
- /* gain to fader, pan width to vpot */
- vpot_parameter = PanWidthAutomation;
- _fader->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _fader;
- _vpot->set_control (pan_control);
- control_by_parameter[PanWidthAutomation] = _vpot;
- }
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanWidthAutomation] = 0;
- }
+ pan_control = _route->pan_width_control ();
break;
-
case PanElevationAutomation:
break;
case PanFrontBackAutomation:
break;
case PanLFEAutomation:
break;
- case TrimAutomation:
- _trim_mode = TrimAutomation;
- vpot_parameter = TrimAutomation;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, trim to fader */
- _vpot->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- if (_route->trim() && route()->trim()->active()) {
- _fader->set_control (_route->trim_control());
- control_by_parameter[TrimAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[TrimAutomation] = 0;
- }
- } else {
- /* gain to fader, trim to vpot */
- _fader->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _fader;
- if (_route->trim() && route()->trim()->active()) {
- _vpot->set_control (_route->trim_control());
- control_by_parameter[TrimAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[TrimAutomation] = 0;
- }
- }
- break;
- case PhaseAutomation:
- _trim_mode = PhaseAutomation;
- vpot_parameter = PhaseAutomation;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, phase to fader */
- _vpot->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- if (_route->phase_invert().size()) {
- _fader->set_control (_route->phase_control());
- control_by_parameter[PhaseAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PhaseAutomation] = 0;
- }
- } else {
- /* gain to fader, phase to vpot */
- _fader->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _fader;
- if (_route->phase_invert().size()) {
- _vpot->set_control (_route->phase_control());
- control_by_parameter[PhaseAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PhaseAutomation] = 0;
- }
- }
- break;
default:
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("vpot mode %1 not known.\n", p));
- break;
+ return;
+ }
+ if (pan_control) {
+ _pan_mode = p;
+ _vpot->set_control (pan_control);
}
pending_display[1] = vpot_mode_string ();