#include <stdio.h>
#include <string.h>
#include <stdlib.h>
+#include <math.h>
#include "openjpeg.h"
#include "compat/getopt.h"
#define BMP_DFMT 12
#define YUV_DFMT 13
#define TIF_DFMT 14
+#define RAW_DFMT 15
+#define TGA_DFMT 16
/* ----------------------------------------------------------------------- */
#define CINEMA_24_CS 1302083 /*Codestream length for 24fps*/
char set_imgdir;
/** Enable Cod Format for output*/
char set_out_format;
-
+ /** User specified rate stored in case of cinema option*/
+ float *rates;
}img_fol_t;
void encode_help_display() {
fprintf(stdout,"The markers written to the main_header are : SOC SIZ COD QCD COM.\n");
fprintf(stdout,"COD and QCD never appear in the tile_header.\n");
fprintf(stdout,"\n");
- fprintf(stdout,"- This coder can encode a mega image, a test was made on a 24000x24000 pixels \n");
- fprintf(stdout,"color image. You need enough disk space memory (twice the original) to encode \n");
- fprintf(stdout,"the image,i.e. for a 1.5 GB image you need a minimum of 3GB of disk memory)\n");
- fprintf(stdout,"\n");
fprintf(stdout,"By default:\n");
fprintf(stdout,"------------\n");
fprintf(stdout,"\n");
fprintf(stdout,"-OutFor \n");
fprintf(stdout," REQUIRED only if -ImgDir is used\n");
fprintf(stdout," Need to specify only format without filename <BMP> \n");
- fprintf(stdout," Currently accepts PGM, PPM, PNM, PGX, BMP format\n");
+ fprintf(stdout," Currently accepts PGM, PPM, PNM, PGX, BMP, TIF, RAW and TGA formats\n");
fprintf(stdout,"\n");
- fprintf(stdout,"-i : source file (-i source.pnm also *.pgm, *.ppm) \n");
+ fprintf(stdout,"-i : source file (-i source.pnm also *.pgm, *.ppm, *.bmp, *.tif, *.raw, *.tga) \n");
fprintf(stdout," When using this option -o must be used\n");
fprintf(stdout,"\n");
fprintf(stdout,"-o : destination file (-o dest.j2k or .jp2) \n");
fprintf(stdout,"\n");
fprintf(stdout,"-h : display the help information \n ");
fprintf(stdout,"\n");
- fprintf(stdout,"-cinema2k : Digital Cinema 2K profile compliant codestream for 2K resolution.(-cinema2k 24 or 48) \n");
+ fprintf(stdout,"-cinema2K : Digital Cinema 2K profile compliant codestream for 2K resolution.(-cinema2k 24 or 48) \n");
fprintf(stdout," Need to specify the frames per second for a 2K resolution. Only 24 or 48 fps is allowed\n");
fprintf(stdout,"\n");
- fprintf(stdout,"-cinema4k : Digital Cinema 4K profile compliant codestream for 4K resolution \n");
+ fprintf(stdout,"-cinema4K : Digital Cinema 4K profile compliant codestream for 4K resolution \n");
fprintf(stdout," Frames per second not required. Default value is 24fps\n");
fprintf(stdout,"\n");
fprintf(stdout,"-r : different compression ratios for successive layers (-r 20,10,5)\n ");
fprintf(stdout,"\n");
fprintf(stdout,"-ROI : c=%%d,U=%%d : quantization indices upshifted \n");
fprintf(stdout," for component c=%%d [%%d = 0,1,2]\n");
- fprintf(stdout," with a value of U=%%d [0 <= %%d <= 37] (i.e. -ROI:c=0,U=25) \n");
+ fprintf(stdout," with a value of U=%%d [0 <= %%d <= 37] (i.e. -ROI c=0,U=25) \n");
fprintf(stdout,"\n");
fprintf(stdout,"-d : offset of the origin of the image (-d 150,300) \n");
fprintf(stdout,"\n");
#ifdef USE_JPWL
fprintf(stdout,"-W : adoption of JPWL (Part 11) capabilities (-W params)\n");
fprintf(stdout," The parameters can be written and repeated in any order:\n");
- fprintf(stdout," [h<tile><=type>,s<tile><=method>,a=<addr>,z=<size>,g=<range>,...\n");
- fprintf(stdout," ...,p<tile:pack><=type>]\n");
+ fprintf(stdout," [h<tilepart><=type>,s<tilepart><=method>,a=<addr>,...\n");
+ fprintf(stdout," ...,z=<size>,g=<range>,p<tilepart:pack><=type>]\n");
fprintf(stdout,"\n");
fprintf(stdout," h selects the header error protection (EPB): 'type' can be\n");
fprintf(stdout," [0=none 1,absent=predefined 16=CRC-16 32=CRC-32 37-128=RS]\n");
- fprintf(stdout," if 'tile' is absent, it applies to main and tile headers\n");
- fprintf(stdout," if 'tile' is present, it applies from that tile\n");
- fprintf(stdout," onwards, up to the next h<tile> spec, or to the last tile\n");
+ fprintf(stdout," if 'tilepart' is absent, it is for main and tile headers\n");
+ fprintf(stdout," if 'tilepart' is present, it applies from that tile\n");
+ fprintf(stdout," onwards, up to the next h<> spec, or to the last tilepart\n");
fprintf(stdout," in the codestream (max. %d specs)\n", JPWL_MAX_NO_TILESPECS);
fprintf(stdout,"\n");
fprintf(stdout," p selects the packet error protection (EEP/UEP with EPBs)\n");
fprintf(stdout," to be applied to raw data: 'type' can be\n");
fprintf(stdout," [0=none 1,absent=predefined 16=CRC-16 32=CRC-32 37-128=RS]\n");
- fprintf(stdout," if 'tile:pack' is absent, it starts from tile 0, packet 0\n");
- fprintf(stdout," if 'tile:pack' is present, it applies from that tile\n");
+ fprintf(stdout," if 'tilepart:pack' is absent, it is from tile 0, packet 0\n");
+ fprintf(stdout," if 'tilepart:pack' is present, it applies from that tile\n");
fprintf(stdout," and that packet onwards, up to the next packet spec\n");
- fprintf(stdout," or to the last packet in the last tile in the codestream\n");
+ fprintf(stdout," or to the last packet in the last tilepart in the stream\n");
fprintf(stdout," (max. %d specs)\n", JPWL_MAX_NO_PACKSPECS);
fprintf(stdout,"\n");
fprintf(stdout," s enables sensitivity data insertion (ESD): 'method' can be\n");
fprintf(stdout," [-1=NO ESD 0=RELATIVE ERROR 1=MSE 2=MSE REDUCTION 3=PSNR\n");
fprintf(stdout," 4=PSNR INCREMENT 5=MAXERR 6=TSE 7=RESERVED]\n");
- fprintf(stdout," if 'tile' is absent, it applies to main header only\n");
- fprintf(stdout," if 'tile' is present, it applies from that tile\n");
- fprintf(stdout," onwards, up to the next s<tile> spec, or to the last tile\n");
+ fprintf(stdout," if 'tilepart' is absent, it is for main header only\n");
+ fprintf(stdout," if 'tilepart' is present, it applies from that tile\n");
+ fprintf(stdout," onwards, up to the next s<> spec, or to the last tilepart\n");
fprintf(stdout," in the codestream (max. %d specs)\n", JPWL_MAX_NO_TILESPECS);
fprintf(stdout,"\n");
fprintf(stdout," g determines the addressing mode: <range> can be\n");
fprintf(stdout," 1/2 bytes, for the transformed pseudo-floating point value\n");
fprintf(stdout,"\n");
fprintf(stdout," ex.:\n");
- fprintf(stdout," h,h0=64,h3=16,h5=32,p0=78,p0:24=56,p1,p3:0=0,p3:20=32,s=0,s0=6,s3=-1,a=0,g=1,z=1\n");
+ fprintf(stdout," h,h0=64,h3=16,h5=32,p0=78,p0:24=56,p1,p3:0=0,p3:20=32,s=0,\n");
+ fprintf(stdout," s0=6,s3=-1,a=0,g=1,z=1\n");
fprintf(stdout," means\n");
fprintf(stdout," predefined EPB in MH, rs(64,32) from TPH 0 to TPH 2,\n");
fprintf(stdout," CRC-16 in TPH 3 and TPH 4, CRC-32 in remaining TPHs,\n");
fprintf(stdout," UEP rs(78,32) for packets 0 to 23 of tile 0,\n");
- fprintf(stdout," UEP rs(56,32) for packets 24 to the last of tile 0,\n");
- fprintf(stdout," UEP rs default for packets of tile 1,\n");
- fprintf(stdout," no UEP for packets 0 to 19 of tile 3,\n");
- fprintf(stdout," UEP CRC-32 for packets 20 of tile 3 to last tile,\n");
+ fprintf(stdout," UEP rs(56,32) for packs. 24 to the last of tilepart 0,\n");
+ fprintf(stdout," UEP rs default for packets of tilepart 1,\n");
+ fprintf(stdout," no UEP for packets 0 to 19 of tilepart 3,\n");
+ fprintf(stdout," UEP CRC-32 for packs. 20 of tilepart 3 to last tilepart,\n");
fprintf(stdout," relative sensitivity ESD for MH,\n");
fprintf(stdout," TSE ESD from TPH 0 to TPH 2, byte range with automatic\n");
fprintf(stdout," size of addresses and 1 byte for each sensitivity value\n");
fprintf(stdout,"Image_height Image_width\n");
fprintf(stdout,"progression order\n");
fprintf(stdout,"Tiles_size_X Tiles_size_Y\n");
-/* UniPG>> */
fprintf(stdout,"Tiles_nb_X Tiles_nb_Y\n");
-/* <<UniPG */
fprintf(stdout,"Components_nb\n");
fprintf(stdout,"Layers_nb\n");
fprintf(stdout,"decomposition_levels\n");
fprintf(stdout,"[Precincts_size_X_res_Nr Precincts_size_Y_res_Nr]...\n");
fprintf(stdout," [Precincts_size_X_res_0 Precincts_size_Y_res_0]\n");
+ fprintf(stdout,"Main_header_start_position\n");
fprintf(stdout,"Main_header_end_position\n");
fprintf(stdout,"Codestream_size\n");
- fprintf(stdout,"Tile_0 start_pos end_Theader end_pos TotalDisto NumPix MaxMSE\n");
- fprintf(stdout,"Tile_1 '' '' '' '' '' ''\n");
+ fprintf(stdout,"\n");
+ fprintf(stdout,"INFO ON TILES\n");
+ fprintf(stdout,"tileno start_pos end_hd end_tile nbparts disto nbpix disto/nbpix\n");
+ fprintf(stdout,"Tile_0 start_pos end_Theader end_pos NumParts TotalDisto NumPix MaxMSE\n");
+ fprintf(stdout,"Tile_1 '' '' '' '' '' '' ''\n");
+ fprintf(stdout,"...\n");
+ fprintf(stdout,"Tile_Nt '' '' '' '' '' '' ''\n");
+ fprintf(stdout,"...\n");
+ fprintf(stdout,"TILE 0 DETAILS\n");
+ fprintf(stdout,"part_nb tileno num_packs start_pos end_tph_pos end_pos\n");
fprintf(stdout,"...\n");
- fprintf(stdout,"Tile_Nt '' '' '' '' '' ''\n");
+ fprintf(stdout,"Progression_string\n");
+ fprintf(stdout,"pack_nb tileno layno resno compno precno start_pos end_ph_pos end_pos disto\n");
fprintf(stdout,"Tpacket_0 Tile layer res. comp. prec. start_pos end_pos disto\n");
fprintf(stdout,"...\n");
fprintf(stdout,"Tpacket_Np '' '' '' '' '' '' '' ''\n");
int get_file_format(char *filename) {
unsigned int i;
static const char *extension[] = {
- "pgx", "pnm", "pgm", "ppm", "bmp","tif", "j2k", "jp2", "j2c"
+ "pgx", "pnm", "pgm", "ppm", "bmp", "tif", "raw", "tga", "j2k", "jp2", "j2c"
};
static const int format[] = {
- PGX_DFMT, PXM_DFMT, PXM_DFMT, PXM_DFMT, BMP_DFMT,TIF_DFMT, J2K_CFMT, JP2_CFMT, J2K_CFMT
+ PGX_DFMT, PXM_DFMT, PXM_DFMT, PXM_DFMT, BMP_DFMT, TIF_DFMT, RAW_DFMT, TGA_DFMT, J2K_CFMT, JP2_CFMT, J2K_CFMT
};
char * ext = strrchr(filename, '.');
if (ext == NULL)
return format[i];
}
}
-
return -1;
}
char get_next_file(int imageno,dircnt_t *dirptr,img_fol_t *img_fol, opj_cparameters_t *parameters){
char image_filename[OPJ_PATH_LEN], infilename[OPJ_PATH_LEN],outfilename[OPJ_PATH_LEN],temp_ofname[OPJ_PATH_LEN];
+ char *temp_p, temp1[OPJ_PATH_LEN]="";
strcpy(image_filename,dirptr->filename[imageno]);
fprintf(stderr,"File Number %d \"%s\"\n",imageno,image_filename);
//Set output file
strcpy(temp_ofname,get_file_name(image_filename));
+ while((temp_p = strtok(NULL,".")) != NULL){
+ strcat(temp_ofname,temp1);
+ sprintf(temp1,".%s",temp_p);
+ }
if(img_fol->set_out_format==1){
sprintf(outfilename,"%s/%s.%s",img_fol->imgdirpath,temp_ofname,img_fol->out_format);
strncpy(parameters->outfile, outfilename, sizeof(outfilename));
}
-void cinema_setup_encoder(opj_cparameters_t *parameters,opj_image_t *image){
+void cinema_setup_encoder(opj_cparameters_t *parameters,opj_image_t *image, img_fol_t *img_fol){
int i;
float temp_rate;
opj_poc_t *POC = NULL;
parameters->numresolution = 6;
}
if (!((image->comps[0].w == 2048) | (image->comps[0].h == 1080))){
- fprintf(stdout,"Image coordinates %d x %d is not 2K compliant.\nJPEG Digital Cinema Profile-3 (2K profile) compliance requires that at least one of coordinates match 2048 x 1080\n",image->comps[0].w,image->comps[0].h);
+ fprintf(stdout,"Image coordinates %d x %d is not 2K compliant.\nJPEG Digital Cinema Profile-3 "
+ "(2K profile) compliance requires that at least one of coordinates match 2048 x 1080\n",
+ image->comps[0].w,image->comps[0].h);
parameters->cp_rsiz = STD_RSIZ;
}
break;
parameters->numresolution = 7;
}
if (!((image->comps[0].w == 4096) | (image->comps[0].h == 2160))){
- fprintf(stdout,"Image coordinates %d x %d is not 4K compliant.\nJPEG Digital Cinema Profile-4 (4K profile) compliance requires that atleast one of coordinates match 4096 x 2160\n",image->comps[0].w,image->comps[0].h);
+ fprintf(stdout,"Image coordinates %d x %d is not 4K compliant.\nJPEG Digital Cinema Profile-4"
+ "(4K profile) compliance requires that at least one of coordinates match 4096 x 2160\n",
+ image->comps[0].w,image->comps[0].h);
parameters->cp_rsiz = STD_RSIZ;
}
parameters->numpocs = initialise_4K_poc(parameters->POC,parameters->numresolution);
switch (parameters->cp_cinema){
case CINEMA2K_24:
case CINEMA4K_24:
- for(i=0;i<parameters->tcp_numlayers;i++){
+ for(i=0 ; i<parameters->tcp_numlayers ; i++){
temp_rate = 0 ;
- if (parameters->tcp_rates[i]== 0){
+ if (img_fol->rates[i]== 0){
parameters->tcp_rates[0]= ((float) (image->numcomps * image->comps[0].w * image->comps[0].h * image->comps[0].prec))/
(CINEMA_24_CS * 8 * image->comps[0].dx * image->comps[0].dy);
}else{
temp_rate =((float) (image->numcomps * image->comps[0].w * image->comps[0].h * image->comps[0].prec))/
- (parameters->tcp_rates[i] * 8 * image->comps[0].dx * image->comps[0].dy);
+ (img_fol->rates[i] * 8 * image->comps[0].dx * image->comps[0].dy);
if (temp_rate > CINEMA_24_CS ){
parameters->tcp_rates[i]= ((float) (image->numcomps * image->comps[0].w * image->comps[0].h * image->comps[0].prec))/
- (CINEMA_24_CS * 8 * image->comps[0].dx * image->comps[0].dy);
+ (CINEMA_24_CS * 8 * image->comps[0].dx * image->comps[0].dy);
+ }else{
+ parameters->tcp_rates[i]= img_fol->rates[i];
}
}
}
break;
case CINEMA2K_48:
- for(i=0;i<parameters->tcp_numlayers;i++){
+ for(i=0 ; i<parameters->tcp_numlayers ; i++){
temp_rate = 0 ;
- if (parameters->tcp_rates[i]== 0){
+ if (img_fol->rates[i]== 0){
parameters->tcp_rates[0]= ((float) (image->numcomps * image->comps[0].w * image->comps[0].h * image->comps[0].prec))/
(CINEMA_48_CS * 8 * image->comps[0].dx * image->comps[0].dy);
}else{
temp_rate =((float) (image->numcomps * image->comps[0].w * image->comps[0].h * image->comps[0].prec))/
- (parameters->tcp_rates[i] * 8 * image->comps[0].dx * image->comps[0].dy);
+ (img_fol->rates[i] * 8 * image->comps[0].dx * image->comps[0].dy);
if (temp_rate > CINEMA_48_CS ){
parameters->tcp_rates[0]= ((float) (image->numcomps * image->comps[0].w * image->comps[0].h * image->comps[0].prec))/
- (CINEMA_48_CS * 8 * image->comps[0].dx * image->comps[0].dy);
+ (CINEMA_48_CS * 8 * image->comps[0].dx * image->comps[0].dy);
+ }else{
+ parameters->tcp_rates[i]= img_fol->rates[i];
}
}
}
/* ------------------------------------------------------------------------------------ */
-int parse_cmdline_encoder(int argc, char **argv, opj_cparameters_t *parameters,img_fol_t *img_fol) {
+/**
+Create an index and write it to a file
+@param cstr_info Codestream information
+@param index Index filename
+@return Returns 0 if successful, returns 1 otherwise
+*/
+int write_index_file(opj_codestream_info_t *cstr_info, char *index) {
+ int tileno, compno, layno, resno, precno, pack_nb, x, y;
+ FILE *stream = NULL;
+ double total_disto = 0;
+/* UniPG>> */
+ int tilepartno;
+
+#ifdef USE_JPWL
+ if (!strcmp(index, JPWL_PRIVATEINDEX_NAME))
+ return 0;
+#endif /* USE_JPWL */
+/* <<UniPG */
+
+ if (!cstr_info)
+ return 1;
+
+ stream = fopen(index, "w");
+ if (!stream) {
+ fprintf(stderr, "failed to open index file [%s] for writing\n", index);
+ return 1;
+ }
+
+ fprintf(stream, "%d %d\n", cstr_info->image_w, cstr_info->image_h);
+ fprintf(stream, "%d\n", cstr_info->prog);
+ fprintf(stream, "%d %d\n", cstr_info->tile_x, cstr_info->tile_y);
+ fprintf(stream, "%d %d\n", cstr_info->tw, cstr_info->th);
+ fprintf(stream, "%d\n", cstr_info->numcomps);
+ fprintf(stream, "%d\n", cstr_info->numlayers);
+ fprintf(stream, "%d\n", cstr_info->numdecompos);
+
+ for (resno = cstr_info->numdecompos[0]; resno >= 0; resno--) {
+ fprintf(stream, "[%d,%d] ",
+ (1 << cstr_info->tile[0].pdx[resno]), (1 << cstr_info->tile[0].pdx[resno])); /* based on tile 0 and component 0 */
+ }
+
+ fprintf(stream, "\n");
+/* UniPG>> */
+ fprintf(stream, "%d\n", cstr_info->main_head_start);
+/* <<UniPG */
+ fprintf(stream, "%d\n", cstr_info->main_head_end);
+ fprintf(stream, "%d\n", cstr_info->codestream_size);
+
+ fprintf(stream, "\nINFO ON TILES\n");
+ fprintf(stream, "tileno start_pos end_hd end_tile nbparts disto nbpix disto/nbpix\n");
+ for (tileno = 0; tileno < cstr_info->tw * cstr_info->th; tileno++) {
+ fprintf(stream, "%4d %9d %9d %9d %9d %9e %9d %9e\n",
+ cstr_info->tile[tileno].tileno,
+ cstr_info->tile[tileno].start_pos,
+ cstr_info->tile[tileno].end_header,
+ cstr_info->tile[tileno].end_pos,
+ cstr_info->tile[tileno].num_tps,
+ cstr_info->tile[tileno].distotile, cstr_info->tile[tileno].numpix,
+ cstr_info->tile[tileno].distotile / cstr_info->tile[tileno].numpix);
+ }
+
+ for (tileno = 0; tileno < cstr_info->tw * cstr_info->th; tileno++) {
+ int start_pos, end_ph_pos, end_pos;
+ double disto = 0;
+ int max_numdecompos = 0;
+ pack_nb = 0;
+
+ for (compno = 0; compno < cstr_info->numcomps; compno++) {
+ if (max_numdecompos < cstr_info->numdecompos[compno])
+ max_numdecompos = cstr_info->numdecompos[compno];
+ }
+
+ fprintf(stream, "\nTILE %d DETAILS\n", tileno);
+ fprintf(stream, "part_nb tileno start_pack num_packs start_pos end_tph_pos end_pos\n");
+ for (tilepartno = 0; tilepartno < cstr_info->tile[tileno].num_tps; tilepartno++)
+ fprintf(stream, "%4d %9d %9d %9d %9d %11d %9d\n",
+ tilepartno, tileno,
+ cstr_info->tile[tileno].tp[tilepartno].tp_start_pack,
+ cstr_info->tile[tileno].tp[tilepartno].tp_numpacks,
+ cstr_info->tile[tileno].tp[tilepartno].tp_start_pos,
+ cstr_info->tile[tileno].tp[tilepartno].tp_end_header,
+ cstr_info->tile[tileno].tp[tilepartno].tp_end_pos
+ );
+ if (cstr_info->prog == LRCP) { /* LRCP */
+ fprintf(stream, "LRCP\npack_nb tileno layno resno compno precno start_pos end_ph_pos end_pos disto\n");
+
+ for (layno = 0; layno < cstr_info->numlayers; layno++) {
+ for (resno = 0; resno < max_numdecompos + 1; resno++) {
+ for (compno = 0; compno < cstr_info->numcomps; compno++) {
+ int prec_max;
+ if (resno > cstr_info->numdecompos[compno])
+ break;
+ prec_max = cstr_info->tile[tileno].pw[resno] * cstr_info->tile[tileno].ph[resno];
+ for (precno = 0; precno < prec_max; precno++) {
+ start_pos = cstr_info->tile[tileno].packet[pack_nb].start_pos;
+ end_ph_pos = cstr_info->tile[tileno].packet[pack_nb].end_ph_pos;
+ end_pos = cstr_info->tile[tileno].packet[pack_nb].end_pos;
+ disto = cstr_info->tile[tileno].packet[pack_nb].disto;
+ fprintf(stream, "%4d %6d %7d %5d %6d %6d %6d %6d %7d %8e\n",
+ pack_nb, tileno, layno, resno, compno, precno, start_pos, end_ph_pos, end_pos, disto);
+ total_disto += disto;
+ pack_nb++;
+ }
+ }
+ }
+ }
+ } /* LRCP */
+ else if (cstr_info->prog == RLCP) { /* RLCP */
+
+ fprintf(stream, "RLCP\npack_nb tileno resno layno compno precno start_pos end_ph_pos end_pos disto\n");
+
+ for (resno = 0; resno < max_numdecompos + 1; resno++) {
+ for (layno = 0; layno < cstr_info->numlayers; layno++) {
+ for (compno = 0; compno < cstr_info->numcomps; compno++) {
+ int prec_max;
+ if (resno > cstr_info->numdecompos[compno])
+ break;
+ prec_max = cstr_info->tile[tileno].pw[resno] * cstr_info->tile[tileno].ph[resno];
+ for (precno = 0; precno < prec_max; precno++) {
+ start_pos = cstr_info->tile[tileno].packet[pack_nb].start_pos;
+ end_ph_pos = cstr_info->tile[tileno].packet[pack_nb].end_ph_pos;
+ end_pos = cstr_info->tile[tileno].packet[pack_nb].end_pos;
+ disto = cstr_info->tile[tileno].packet[pack_nb].disto;
+ fprintf(stream, "%4d %6d %5d %7d %6d %6d %9d %9d %7d %8e\n",
+ pack_nb, tileno, resno, layno, compno, precno, start_pos, end_ph_pos, end_pos, disto);
+ total_disto += disto;
+ pack_nb++;
+ }
+ }
+ }
+ }
+ } /* RLCP */
+ else if (cstr_info->prog == RPCL) { /* RPCL */
+
+ fprintf(stream, "RPCL\npack_nb tileno resno precno compno layno start_pos end_ph_pos end_pos disto\n");
+
+ for (resno = 0; resno < max_numdecompos + 1; resno++) {
+ /* I suppose components have same XRsiz, YRsiz */
+ int x0 = cstr_info->tile_Ox + tileno - (int)floor((float)tileno/(float)cstr_info->tw ) * cstr_info->tw * cstr_info->tile_x;
+ int y0 = cstr_info->tile_Ox + (int)floor( (float)tileno/(float)cstr_info->tw ) * cstr_info->tile_y;
+ int x1 = x0 + cstr_info->tile_x;
+ int y1 = y0 + cstr_info->tile_y;
+ for (compno = 0; compno < cstr_info->numcomps; compno++) {
+ int prec_max = cstr_info->tile[tileno].pw[resno] * cstr_info->tile[tileno].ph[resno];
+ if (resno > cstr_info->numdecompos[compno])
+ break;
+ for (precno = 0; precno < prec_max; precno++) {
+ int pcnx = cstr_info->tile[tileno].pw[resno];
+ int pcx = (int) pow( 2, cstr_info->tile[tileno].pdx[resno] + cstr_info->numdecompos[compno] - resno );
+ int pcy = (int) pow( 2, cstr_info->tile[tileno].pdy[resno] + cstr_info->numdecompos[compno] - resno );
+ int precno_x = precno - (int) floor( (float)precno/(float)pcnx ) * pcnx;
+ int precno_y = (int) floor( (float)precno/(float)pcnx );
+ for(y = y0; y < y1; y++) {
+ if (precno_y*pcy == y ) {
+ for (x = x0; x < x1; x++) {
+ if (precno_x*pcx == x ) {
+ for (layno = 0; layno < cstr_info->numlayers; layno++) {
+ start_pos = cstr_info->tile[tileno].packet[pack_nb].start_pos;
+ end_ph_pos = cstr_info->tile[tileno].packet[pack_nb].end_ph_pos;
+ end_pos = cstr_info->tile[tileno].packet[pack_nb].end_pos;
+ disto = cstr_info->tile[tileno].packet[pack_nb].disto;
+ fprintf(stream, "%4d %6d %5d %6d %6d %7d %9d %9d %7d %8e\n",
+ pack_nb, tileno, resno, precno, compno, layno, start_pos, end_ph_pos, end_pos, disto);
+ total_disto += disto;
+ pack_nb++;
+ }
+ }
+ }/* x = x0..x1 */
+ }
+ } /* y = y0..y1 */
+ } /* precno */
+ } /* compno */
+ } /* resno */
+ } /* RPCL */
+ else if (cstr_info->prog == PCRL) { /* PCRL */
+ /* I suppose components have same XRsiz, YRsiz */
+ int x0 = cstr_info->tile_Ox + tileno - (int)floor( (float)tileno/(float)cstr_info->tw ) * cstr_info->tw * cstr_info->tile_x;
+ int y0 = cstr_info->tile_Ox + (int)floor( (float)tileno/(float)cstr_info->tw ) * cstr_info->tile_y;
+ int x1 = x0 + cstr_info->tile_x;
+ int y1 = y0 + cstr_info->tile_y;
+
+ fprintf(stream, "PCRL\npack_nb tileno precno compno resno layno start_pos end_ph_pos end_pos disto\n");
+
+ for (compno = 0; compno < cstr_info->numcomps; compno++) {
+ for (resno = 0; resno < cstr_info->numdecompos[compno] + 1; resno++) {
+ int prec_max = cstr_info->tile[tileno].pw[resno] * cstr_info->tile[tileno].ph[resno];
+ for (precno = 0; precno < prec_max; precno++) {
+ int pcnx = cstr_info->tile[tileno].pw[resno];
+ int pcx = (int) pow( 2, cstr_info->tile[tileno].pdx[resno] + cstr_info->numdecompos[compno] - resno );
+ int pcy = (int) pow( 2, cstr_info->tile[tileno].pdy[resno] + cstr_info->numdecompos[compno] - resno );
+ int precno_x = precno - (int) floor( (float)precno/(float)pcnx ) * pcnx;
+ int precno_y = (int) floor( (float)precno/(float)pcnx );
+ for(y = y0; y < y1; y++) {
+ if (precno_y*pcy == y ) {
+ for (x = x0; x < x1; x++) {
+ if (precno_x*pcx == x ) {
+ for (layno = 0; layno < cstr_info->numlayers; layno++) {
+ start_pos = cstr_info->tile[tileno].packet[pack_nb].start_pos;
+ end_ph_pos = cstr_info->tile[tileno].packet[pack_nb].end_ph_pos;
+ end_pos = cstr_info->tile[tileno].packet[pack_nb].end_pos;
+ disto = cstr_info->tile[tileno].packet[pack_nb].disto;
+ fprintf(stream, "%4d %6d %6d %6d %5d %7d %9d %9d %7d %8e\n",
+ pack_nb, tileno, precno, compno, resno, layno, start_pos, end_ph_pos, end_pos, disto);
+ total_disto += disto;
+ pack_nb++;
+ }
+ }
+ }/* x = x0..x1 */
+ }
+ } /* y = y0..y1 */
+ } /* precno */
+ } /* resno */
+ } /* compno */
+ } /* PCRL */
+ else { /* CPRL */
+
+ fprintf(stream, "CPRL\npack_nb tileno compno precno resno layno start_pos end_ph_pos end_pos disto\n");
+
+ for (compno = 0; compno < cstr_info->numcomps; compno++) {
+ /* I suppose components have same XRsiz, YRsiz */
+ int x0 = cstr_info->tile_Ox + tileno - (int)floor( (float)tileno/(float)cstr_info->tw ) * cstr_info->tw * cstr_info->tile_x;
+ int y0 = cstr_info->tile_Ox + (int)floor( (float)tileno/(float)cstr_info->tw ) * cstr_info->tile_y;
+ int x1 = x0 + cstr_info->tile_x;
+ int y1 = y0 + cstr_info->tile_y;
+
+ for (resno = 0; resno < cstr_info->numdecompos[compno] + 1; resno++) {
+ int prec_max = cstr_info->tile[tileno].pw[resno] * cstr_info->tile[tileno].ph[resno];
+ for (precno = 0; precno < prec_max; precno++) {
+ int pcnx = cstr_info->tile[tileno].pw[resno];
+ int pcx = (int) pow( 2, cstr_info->tile[tileno].pdx[resno] + cstr_info->numdecompos[compno] - resno );
+ int pcy = (int) pow( 2, cstr_info->tile[tileno].pdy[resno] + cstr_info->numdecompos[compno] - resno );
+ int precno_x = precno - (int) floor( (float)precno/(float)pcnx ) * pcnx;
+ int precno_y = (int) floor( (float)precno/(float)pcnx );
+ for(y = y0; y < y1; y++) {
+ if (precno_y*pcy == y ) {
+ for (x = x0; x < x1; x++) {
+ if (precno_x*pcx == x ) {
+ for (layno = 0; layno < cstr_info->numlayers; layno++) {
+ start_pos = cstr_info->tile[tileno].packet[pack_nb].start_pos;
+ end_ph_pos = cstr_info->tile[tileno].packet[pack_nb].end_ph_pos;
+ end_pos = cstr_info->tile[tileno].packet[pack_nb].end_pos;
+ disto = cstr_info->tile[tileno].packet[pack_nb].disto;
+ fprintf(stream, "%4d %6d %6d %6d %5d %7d %9d %9d %7d %8e\n",
+ pack_nb, tileno, compno, precno, resno, layno, start_pos, end_ph_pos, end_pos, disto);
+ total_disto += disto;
+ pack_nb++;
+ }
+ }
+ }/* x = x0..x1 */
+ }
+ } /* y = y0..y1 */
+ } /* precno */
+ } /* resno */
+ } /* compno */
+ } /* CPRL */
+ } /* tileno */
+
+ fprintf(stream, "%8e\n", cstr_info->D_max); /* SE max */
+ fprintf(stream, "%.8e\n", total_disto); /* SE totale */
+/* UniPG>> */
+ /* print the markers' list */
+ fprintf(stream, "\nMARKER LIST\n");
+ fprintf(stream, "%d\n", cstr_info->marknum);
+ fprintf(stream, "type\tstart_pos length\n");
+ for (x = 0; x < cstr_info->marknum; x++)
+ fprintf(stream, "%X\t%9d %9d\n", cstr_info->marker[x].type, cstr_info->marker[x].pos, cstr_info->marker[x].len);
+/* <<UniPG */
+ fclose(stream);
+
+ fprintf(stderr,"Generated index file %s\n", index);
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------------------ */
+
+int parse_cmdline_encoder(int argc, char **argv, opj_cparameters_t *parameters,
+ img_fol_t *img_fol, raw_cparameters_t *raw_cp, char *indexfilename) {
int i, j,totlen;
option_t long_option[]={
{"cinema2K",REQ_ARG, NULL ,'w'},
{"EPH",NO_ARG, NULL ,'E'},
{"OutFor",REQ_ARG, NULL ,'O'},
{"POC",REQ_ARG, NULL ,'P'},
+ {"ROI",REQ_ARG, NULL ,'R'},
};
/* parse the command line */
-/* UniPG>> */
- const char optlist[] = "i:o:hr:q:n:b:c:t:p:s:SEM:x:R:d:T:If:P:C:"
+ const char optlist[] = "i:o:hr:q:n:b:c:t:p:s:SEM:x:R:d:T:If:P:C:F:"
#ifdef USE_JPWL
"W:"
#endif /* USE_JPWL */
totlen=sizeof(long_option);
img_fol->set_out_format=0;
+ raw_cp->rawWidth = 0;
while (1) {
int c = getopt_long(argc, argv, optlist,long_option,totlen);
-/* <<UniPG */
if (c == -1)
break;
switch (c) {
case PXM_DFMT:
case BMP_DFMT:
case TIF_DFMT:
+ case RAW_DFMT:
+ case TGA_DFMT:
break;
default:
fprintf(stderr,
"!! Unrecognized format for infile : %s "
- "[accept only *.pnm, *.pgm, *.ppm, *.pgx, *.bmp or *.tif] !!\n\n",
+ "[accept only *.pnm, *.pgm, *.ppm, *.pgx, *.bmp, *.tif, *.raw or *.tga] !!\n\n",
infile);
return 1;
}
case JP2_CFMT:
break;
default:
- fprintf(stderr, "Unknown output format image %s [only *.j2k, *.jp2]!! \n", outfile);
+ fprintf(stderr, "Unknown output format image %s [only *.j2k, *.j2c or *.jp2]!! \n", outfile);
return 1;
}
strncpy(parameters->outfile, outfile, sizeof(parameters->outfile)-1);
img_fol->out_format = optarg;
break;
default:
- fprintf(stderr, "Unknown output format image [only j2k, jp2]!! \n");
+ fprintf(stderr, "Unknown output format image [only j2k, j2c, jp2]!! \n");
return 1;
}
}
/* ----------------------------------------------------- */
+
+ case 'F': /* Raw image format parameters */
+ {
+ char signo;
+ char *s = optarg;
+ if (sscanf(s, "%d,%d,%d,%d,%c", &raw_cp->rawWidth, &raw_cp->rawHeight, &raw_cp->rawComp, &raw_cp->rawBitDepth, &signo) == 5) {
+ if (signo == 's') {
+ raw_cp->rawSigned = true;
+ fprintf(stdout,"\nRaw file parameters: %d,%d,%d,%d Signed\n", raw_cp->rawWidth, raw_cp->rawHeight, raw_cp->rawComp, raw_cp->rawBitDepth);
+ }
+ else if (signo == 'u') {
+ raw_cp->rawSigned = false;
+ fprintf(stdout,"\nRaw file parameters: %d,%d,%d,%d Unsigned\n", raw_cp->rawWidth, raw_cp->rawHeight, raw_cp->rawComp, raw_cp->rawBitDepth);
+ }
+ else {
+ fprintf(stderr,"\nError: invalid raw image parameters: Unknown sign of raw file\n");
+ fprintf(stderr,"Please use the Format option -F:\n");
+ fprintf(stderr,"-F rawWidth,rawHeight,rawComp,rawBitDepth,s/u (Signed/Unsigned)\n");
+ fprintf(stderr,"Example: -i lena.raw -o lena.j2k -F 512,512,3,8,u\n");
+ fprintf(stderr,"Aborting\n");
+ }
+ }
+ else {
+ fprintf(stderr,"\nError: invalid raw image parameters\n");
+ fprintf(stderr,"Please use the Format option -F:\n");
+ fprintf(stderr,"-F rawWidth,rawHeight,rawComp,rawBitDepth,s/u (Signed/Unsigned)\n");
+ fprintf(stderr,"Example: -i lena.raw -o lena.j2k -F 512,512,3,8,u\n");
+ fprintf(stderr,"Aborting\n");
+ return 1;
+ }
+ }
+ break;
+
+ /* ----------------------------------------------------- */
+
case 'q': /* add fixed_quality */
{
char *s = optarg;
case 'x': /* creation of index file */
{
char *index = optarg;
- strncpy(parameters->index, index, sizeof(parameters->index)-1);
- parameters->index_on = 1;
+ strncpy(indexfilename, index, OPJ_PATH_LEN);
}
break;
case 'R': /* ROI */
{
- if (sscanf(optarg, "OI:c=%d,U=%d", ¶meters->roi_compno,
+ if (sscanf(optarg, "c=%d,U=%d", ¶meters->roi_compno,
¶meters->roi_shift) != 2) {
- fprintf(stderr, "ROI error !! [-ROI:c='compno',U='shift']\n");
+ fprintf(stderr, "ROI error !! [-ROI c='compno',U='shift']\n");
return 1;
}
}
int hprot, pprot, sens, addr, size, range;
/* we need to enable indexing */
- if (!parameters->index_on) {
- strncpy(parameters->index, JPWL_PRIVATEINDEX_NAME, sizeof(parameters->index)-1);
- parameters->index_on = 1;
+ if (!indexfilename) {
+ strncpy(indexfilename, JPWL_PRIVATEINDEX_NAME, OPJ_PATH_LEN);
}
/* search for different protection methods */
/* Tile part header, specified */
if (!((hprot == 0) || (hprot == 1) || (hprot == 16) || (hprot == 32) ||
((hprot >= 37) && (hprot <= 128)))) {
- fprintf(stderr, "ERROR -> invalid tile header protection method h = %d\n", hprot);
+ fprintf(stderr, "ERROR -> invalid tile part header protection method h = %d\n", hprot);
return 1;
}
if (tile < 0) {
- fprintf(stderr, "ERROR -> invalid tile number on protection method t = %d\n", tile);
+ fprintf(stderr, "ERROR -> invalid tile part number on protection method t = %d\n", tile);
return 1;
}
if (tilespec < JPWL_MAX_NO_TILESPECS) {
} else if(sscanf(token, "h%d", &tile) == 1) {
/* Tile part header, unspecified */
if (tile < 0) {
- fprintf(stderr, "ERROR -> invalid tile number on protection method t = %d\n", tile);
+ fprintf(stderr, "ERROR -> invalid tile part number on protection method t = %d\n", tile);
return 1;
}
if (tilespec < JPWL_MAX_NO_TILESPECS) {
return 1;
}
if (tile < 0) {
- fprintf(stderr, "ERROR -> invalid tile number on protection method p = %d\n", tile);
+ fprintf(stderr, "ERROR -> invalid tile part number on protection method p = %d\n", tile);
return 1;
}
if (packspec < JPWL_MAX_NO_PACKSPECS) {
return 1;
}
if (tile < 0) {
- fprintf(stderr, "ERROR -> invalid tile number on protection method p = %d\n", tile);
+ fprintf(stderr, "ERROR -> invalid tile part number on protection method p = %d\n", tile);
return 1;
}
if (pack < 0) {
return 1;
}
if (tile < 0) {
- fprintf(stderr, "ERROR -> invalid tile number on protection method p = %d\n", tile);
+ fprintf(stderr, "ERROR -> invalid tile part number on protection method p = %d\n", tile);
return 1;
}
if (pack < 0) {
} else if (sscanf(token, "p%d", &tile) == 1) {
/* default from a tile on */
if (tile < 0) {
- fprintf(stderr, "ERROR -> invalid tile number on protection method p = %d\n", tile);
+ fprintf(stderr, "ERROR -> invalid tile part number on protection method p = %d\n", tile);
return 1;
}
if (packspec < JPWL_MAX_NO_PACKSPECS) {
} else if(sscanf(token, "s%d=%d", &tile, &sens) == 2) {
/* Tile part header, specified */
if ((sens < -1) || (sens > 7)) {
- fprintf(stderr, "ERROR -> invalid tile header sensitivity method s = %d\n", sens);
+ fprintf(stderr, "ERROR -> invalid tile part header sensitivity method s = %d\n", sens);
return 1;
}
if (tile < 0) {
- fprintf(stderr, "ERROR -> invalid tile number on sensitivity method t = %d\n", tile);
+ fprintf(stderr, "ERROR -> invalid tile part number on sensitivity method t = %d\n", tile);
return 1;
}
if (tilespec < JPWL_MAX_NO_TILESPECS) {
} else if(sscanf(token, "s%d", &tile) == 1) {
/* Tile part header, unspecified */
if (tile < 0) {
- fprintf(stderr, "ERROR -> invalid tile number on sensitivity method t = %d\n", tile);
+ fprintf(stderr, "ERROR -> invalid tile part number on sensitivity method t = %d\n", tile);
return 1;
}
if (tilespec < JPWL_MAX_NO_TILESPECS) {
}
}
+ if (parameters->decod_format == RAW_DFMT && raw_cp->rawWidth == 0) {
+ fprintf(stderr,"\nError: invalid raw image parameters\n");
+ fprintf(stderr,"Please use the Format option -F:\n");
+ fprintf(stderr,"-F rawWidth,rawHeight,rawComp,rawBitDepth,s/u (Signed/Unsigned)\n");
+ fprintf(stderr,"Example: -i lena.raw -o lena.j2k -F 512,512,3,8,u\n");
+ fprintf(stderr,"Aborting\n");
+ return 1;
+ }
+
if ((parameters->cp_disto_alloc || parameters->cp_fixed_alloc || parameters->cp_fixed_quality)
&& (!(parameters->cp_disto_alloc ^ parameters->cp_fixed_alloc ^ parameters->cp_fixed_quality))) {
fprintf(stderr, "Error: options -r -q and -f cannot be used together !!\n");
int i,num_images;
int imageno;
dircnt_t *dirptr;
+ raw_cparameters_t raw_cp;
+ opj_codestream_info_t cstr_info; /* Codestream information structure */
+ char indexfilename[OPJ_PATH_LEN]; /* index file name */
/*
configure the event callbacks (not required)
/* set encoding parameters to default values */
opj_set_default_encoder_parameters(¶meters);
+ /* Initialize indexfilename and img_fol */
+ *indexfilename = 0;
+ memset(&img_fol,0,sizeof(img_fol_t));
+
/* parse input and get user encoding parameters */
- if(parse_cmdline_encoder(argc, argv, ¶meters,&img_fol) == 1) {
- return 0;
+ if(parse_cmdline_encoder(argc, argv, ¶meters,&img_fol, &raw_cp, indexfilename) == 1) {
+ return 1;
}
if (parameters.cp_cinema){
+ img_fol.rates = (float*)malloc(parameters.tcp_numlayers * sizeof(float));
+ for(i=0; i< parameters.tcp_numlayers; i++){
+ img_fol.rates[i] = parameters.tcp_rates[i];
+ }
cinema_parameters(¶meters);
- }
-
+ }
/* Create comment for codestream */
if(parameters.cp_comment == NULL) {
sprintf(parameters.cp_comment,"%s%s", comment, version);
#endif
/* <<UniPG */
-
}
/* Read directory if necessary */
-
if(img_fol.set_imgdir==1){
num_images=get_num_images(img_fol.imgdirpath);
-
dirptr=(dircnt_t*)malloc(sizeof(dircnt_t));
if(dirptr){
dirptr->filename_buf = (char*)malloc(num_images*OPJ_PATH_LEN*sizeof(char)); // Stores at max 10 image file names
dirptr->filename = (char**) malloc(num_images*sizeof(char*));
-
if(!dirptr->filename_buf){
return 0;
}
num_images=1;
}
/*Encoding image one by one*/
- for(imageno=0;imageno<num_images;imageno++)
- {
-
+ for(imageno=0;imageno<num_images;imageno++) {
image = NULL;
fprintf(stderr,"\n");
-
if(img_fol.set_imgdir==1){
if (get_next_file(imageno, dirptr,&img_fol, ¶meters)) {
fprintf(stderr,"skipping file...\n");
break;
case TIF_DFMT:
break;
-
+ case RAW_DFMT:
+ break;
+ case TGA_DFMT:
+ break;
default:
fprintf(stderr,"skipping file...\n");
continue;
return 1;
}
break;
+
+ case RAW_DFMT:
+ image = rawtoimage(parameters.infile, ¶meters, &raw_cp);
+ if (!image) {
+ fprintf(stderr, "Unable to load raw file\n");
+ return 1;
+ }
+ break;
+
+ case TGA_DFMT:
+ image = tgatoimage(parameters.infile, ¶meters);
+ if (!image) {
+ fprintf(stderr, "Unable to load tga file\n");
+ return 1;
+ }
+ break;
}
/* Decide if MCT should be used */
parameters.tcp_mct = image->numcomps == 3 ? 1 : 0;
if(parameters.cp_cinema){
- cinema_setup_encoder(¶meters,image);
+ cinema_setup_encoder(¶meters,image,&img_fol);
}
/* encode the destination image */
cio = opj_cio_open((opj_common_ptr)cinfo, NULL, 0);
/* encode the image */
- bSuccess = opj_encode(cinfo, cio, image, parameters.index);
+ if (*indexfilename) // If need to extract codestream information
+ bSuccess = opj_encode_with_info(cinfo, cio, image, &cstr_info);
+ else
+ bSuccess = opj_encode(cinfo, cio, image, NULL);
if (!bSuccess) {
opj_cio_close(cio);
fprintf(stderr, "failed to encode image\n");
/* close and free the byte stream */
opj_cio_close(cio);
+ /* Write the index to disk */
+ if (*indexfilename) {
+ bSuccess = write_index_file(&cstr_info, indexfilename);
+ if (bSuccess) {
+ fprintf(stderr, "Failed to output index file\n");
+ }
+ }
+
/* free remaining compression structures */
opj_destroy_compress(cinfo);
-
+ if (*indexfilename)
+ opj_destroy_cstr_info(&cstr_info);
} else { /* JP2 format output */
int codestream_length;
opj_cio_t *cio = NULL;
cio = opj_cio_open((opj_common_ptr)cinfo, NULL, 0);
/* encode the image */
- bSuccess = opj_encode(cinfo, cio, image, parameters.index);
+ if (*indexfilename) // If need to extract codestream information
+ bSuccess = opj_encode_with_info(cinfo, cio, image, &cstr_info);
+ else
+ bSuccess = opj_encode(cinfo, cio, image, NULL);
if (!bSuccess) {
opj_cio_close(cio);
fprintf(stderr, "failed to encode image\n");
fprintf(stderr,"Generated outfile %s\n",parameters.outfile);
/* close and free the byte stream */
opj_cio_close(cio);
+
+ /* Write the index to disk */
+ if (*indexfilename) {
+ bSuccess = write_index_file(&cstr_info, indexfilename);
+ if (bSuccess) {
+ fprintf(stderr, "Failed to output index file\n");
+ }
+ }
/* free remaining compression structures */
opj_destroy_compress(cinfo);
-
+ if (*indexfilename)
+ opj_destroy_cstr_info(&cstr_info);
}
/* free image data */
return 0;
}
-
projects / openjpeg.git / blobdiff