update_pending = false;
have_timeout = false;
- _uses_gain_mapping = false;
no_draw = false;
_is_boolean = false;
terminal_points_can_slide = true;
trackview.session()->register_with_memento_command_factory(alist->id(), this);
- if (alist->parameter().type() == GainAutomation ||
- alist->parameter().type() == TrimAutomation ||
- alist->parameter().type() == EnvelopeAutomation) {
- set_uses_gain_mapping (true);
- }
-
interpolation_changed (alist->interpolation ());
connect_to_list ();
}
}
}
+}
+bool
+AutomationLine::get_uses_gain_mapping () const
+{
+ switch (_desc.type) {
+ case GainAutomation:
+ case EnvelopeAutomation:
+ case TrimAutomation:
+ return true;
+ default:
+ return false;
+ }
}
void
_line_color = color;
line->set_outline_color (color);
- ArdourCanvas::SVAModifier mod = UIConfiguration::instance().modifier ("automation line fill");
+ Gtkmm2ext::SVAModifier mod = UIConfiguration::instance().modifier ("automation line fill");
line->set_fill_color ((color & 0xffffff00) + mod.a()*255);
}
-void
-AutomationLine::set_uses_gain_mapping (bool yn)
-{
- if (yn != _uses_gain_mapping) {
- _uses_gain_mapping = yn;
- reset ();
- }
-}
-
ControlPoint*
AutomationLine::nth (uint32_t n)
{
string
AutomationLine::get_verbose_cursor_string (double fraction) const
{
- std::string s = fraction_to_string (fraction);
- if (_uses_gain_mapping) {
- s += " dB";
- }
-
- return s;
+ return fraction_to_string (fraction);
}
string
-AutomationLine::get_verbose_cursor_relative_string (double original, double fraction) const
+AutomationLine::get_verbose_cursor_relative_string (double fraction, double delta) const
{
std::string s = fraction_to_string (fraction);
- if (_uses_gain_mapping) {
- s += " dB";
- }
-
- std::string d = fraction_to_relative_string (original, fraction);
-
- if (!d.empty()) {
-
- s += " (\u0394";
- s += d;
-
- if (_uses_gain_mapping) {
- s += " dB";
- }
-
- s += ')';
- }
-
- return s;
+ std::string d = delta_to_string (delta);
+ return s + " (" + d + ")";
}
/**
string
AutomationLine::fraction_to_string (double fraction) const
{
- if (_uses_gain_mapping) {
- char buf[32];
- if (_desc.type == GainAutomation || _desc.type == EnvelopeAutomation || _desc.lower == 0) {
- if (fraction == 0.0) {
- snprintf (buf, sizeof (buf), "-inf");
- } else {
- snprintf (buf, sizeof (buf), "%.1f", accurate_coefficient_to_dB (slider_position_to_gain_with_max (fraction, _desc.upper)));
- }
- } else {
- const double lower_db = accurate_coefficient_to_dB (_desc.lower);
- const double range_db = accurate_coefficient_to_dB (_desc.upper) - lower_db;
- snprintf (buf, sizeof (buf), "%.1f", lower_db + fraction * range_db);
- }
- return buf;
- } else {
- view_to_model_coord_y (fraction);
- return ARDOUR::value_as_string (_desc, fraction);
- }
-
- return ""; /*NOTREACHED*/
+ view_to_model_coord_y (fraction);
+ return ARDOUR::value_as_string (_desc, fraction);
}
-/**
- * @param original an old y-axis fraction
- * @param fraction the new y fraction
- * @return string representation of the difference between original and fraction, using dB if appropriate.
- */
string
-AutomationLine::fraction_to_relative_string (double original, double fraction) const
+AutomationLine::delta_to_string (double delta) const
{
- char buf[32];
-
- if (original == fraction) {
- return "0";
- }
-
- if (_uses_gain_mapping) {
- if (original == 0.0) {
- /* there is no sensible representation of a relative
- change from -inf dB, so return an empty string.
- */
- return "";
- } else if (fraction == 0.0) {
- snprintf (buf, sizeof (buf), "-inf");
- } else {
- double old_db = accurate_coefficient_to_dB (slider_position_to_gain_with_max (original, Config->get_max_gain()));
- double new_db = accurate_coefficient_to_dB (slider_position_to_gain_with_max (fraction, Config->get_max_gain()));
- snprintf (buf, sizeof (buf), "%.1f", new_db - old_db);
- }
+ if (!get_uses_gain_mapping () && _desc.logarithmic) {
+ return "x " + ARDOUR::value_as_string (_desc, delta);
} else {
- view_to_model_coord_y (original);
- view_to_model_coord_y (fraction);
- return ARDOUR::value_as_string (_desc, fraction - original);
+ return "\u0394 " + ARDOUR::value_as_string (_desc, delta);
}
-
- return buf;
}
/**
double
AutomationLine::string_to_fraction (string const & s) const
{
- if (s == "-inf") {
- return 0;
- }
-
double v;
sscanf (s.c_str(), "%lf", &v);
- if (_uses_gain_mapping) {
- v = gain_to_slider_position_with_max (dB_to_coefficient (v), Config->get_max_gain());
- } else {
- double dummy = 0.0;
- model_to_view_coord (dummy, v);
+ switch (_desc.type) {
+ case GainAutomation:
+ case EnvelopeAutomation:
+ case TrimAutomation:
+ if (s == "-inf") { /* translation */
+ v = 0;
+ } else {
+ v = dB_to_coefficient (v);
+ }
+ break;
+ default:
+ break;
}
-
+ model_to_view_coord_y (v);
return v;
}
}
void
-AutomationLine::ContiguousControlPoints::move (double dx, double dy)
+AutomationLine::ContiguousControlPoints::move (double dx, double dvalue)
{
for (std::list<ControlPoint*>::iterator i = begin(); i != end(); ++i) {
- (*i)->move_to ((*i)->get_x() + dx, (*i)->get_y() - line.height() * dy, ControlPoint::Full);
+ // compute y-axis delta
+ double view_y = 1.0 - (*i)->get_y() / line.height();
+ line.view_to_model_coord_y (view_y);
+ line.apply_delta (view_y, dvalue);
+ line.model_to_view_coord_y (view_y);
+ view_y = (1.0 - view_y) * line.height();
+
+ (*i)->move_to ((*i)->get_x() + dx, view_y, ControlPoint::Full);
line.reset_line_coords (**i);
}
}
* @param fraction New y fraction.
* @return x position and y fraction that were actually used (once clamped).
*/
-pair<double, float>
+pair<float, float>
AutomationLine::drag_motion (double const x, float fraction, bool ignore_x, bool with_push, uint32_t& final_index)
{
if (_drag_points.empty()) {
- return pair<double,float> (x,fraction);
+ return pair<double,float> (fraction, _desc.is_linear () ? 0 : 1);
}
double dx = ignore_x ? 0 : (x - _drag_x);
}
}
+ /* compute deflection */
+ double delta_value;
+ {
+ double value0 = _last_drag_fraction;
+ double value1 = _last_drag_fraction + dy;
+ view_to_model_coord_y (value0);
+ view_to_model_coord_y (value1);
+ delta_value = compute_delta (value0, value1);
+ }
+
+ /* special case -inf */
+ if (delta_value == 0 && dy > 0 && !_desc.is_linear ()) {
+ assert (_desc.lower == 0);
+ delta_value = 1.0;
+ }
+
/* clamp y */
for (list<ControlPoint*>::iterator i = _drag_points.begin(); i != _drag_points.end(); ++i) {
- double const y = ((_height - (*i)->get_y()) / _height) + dy;
- if (y < 0) {
- dy -= y;
+ double vy = 1.0 - (*i)->get_y() / _height;
+ view_to_model_coord_y (vy);
+ const double orig = vy;
+ apply_delta (vy, delta_value);
+ if (vy < _desc.lower) {
+ delta_value = compute_delta (orig, _desc.lower);
}
- if (y > 1) {
- dy -= (y - 1);
+ if (vy > _desc.upper) {
+ delta_value = compute_delta (orig, _desc.upper);
}
}
if (dx || dy) {
-
/* and now move each section */
-
for (vector<CCP>::iterator ccp = contiguous_points.begin(); ccp != contiguous_points.end(); ++ccp) {
- (*ccp)->move (dx, dy);
+ (*ccp)->move (dx, delta_value);
}
+
if (with_push) {
final_index = contiguous_points.back()->back()->view_index () + 1;
ControlPoint* p;
}
}
- /* update actual line coordinates (will queue a redraw)
- */
+ /* update actual line coordinates (will queue a redraw) */
if (line_points.size() > 1) {
line->set_steps (line_points, is_stepped());
}
}
+
+ /* calculate effective delta */
+ ControlPoint* cp = _drag_points.front();
+ double vy = 1.0 - cp->get_y() / (double)_height;
+ view_to_model_coord_y (vy);
+ float val = (*(cp->model ()))->value;
+ float effective_delta = _desc.compute_delta (val, vy);
+ /* special case recovery from -inf */
+ if (val == 0 && effective_delta == 0 && vy > 0) {
+ assert (!_desc.is_linear ());
+ effective_delta = HUGE_VAL; // +Infinity
+ }
+
double const result_frac = _last_drag_fraction + dy;
_drag_distance += dx;
_drag_x += dx;
_last_drag_fraction = result_frac;
did_push = with_push;
- return pair<double, float> (_drag_x + dx, result_frac);
+ return pair<float, float> (result_frac, effective_delta);
}
/** Should be called to indicate the end of a drag */
*/
double view_x = cp.get_x();
- double view_y = 1.0 - (cp.get_y() / _height);
+ double view_y = 1.0 - cp.get_y() / (double)_height;
/* if xval has not changed, set it directly from the model to avoid rounding errors */
return;
}
+ /* TODO: abort any drags in progress, e.g. draging points while writing automation
+ * (the control-point model, used by AutomationLine::drag_motion, will be invalid).
+ *
+ * Note: reset() may also be called from an aborted drag (LineDrag::aborted)
+ * maybe abort in list_changed(), interpolation_changed() and ... ?
+ * XXX
+ */
+
alist->apply_to_points (*this, &AutomationLine::reset_callback);
}
void
AutomationLine::queue_reset ()
{
- /* this must be called from the GUI thread
- */
+ /* this must be called from the GUI thread */
if (trackview.editor().session()->transport_rolling() && alist->automation_write()) {
/* automation write pass ... defer to a timeout */
void
AutomationLine::view_to_model_coord_y (double& y) const
{
- /* TODO: This should be more generic (use ParameterDescriptor)
- * or better yet: Controllable -> set_interface();
- */
-
- if ( alist->parameter().type() == GainAutomation
- || alist->parameter().type() == EnvelopeAutomation
- || (_desc.logarithmic && _desc.lower == 0. && _desc.upper > _desc.lower)) {
- y = slider_position_to_gain_with_max (y, _desc.upper);
- y = max ((double)_desc.lower, y);
- y = min ((double)_desc.upper, y);
- } else if (alist->parameter().type() == TrimAutomation
- || (_desc.logarithmic && _desc.lower * _desc.upper > 0 && _desc.upper > _desc.lower)) {
- const double lower_db = accurate_coefficient_to_dB (_desc.lower);
- const double range_db = accurate_coefficient_to_dB (_desc.upper) - lower_db;
- y = max (0.0, y);
- y = min (1.0, y);
- y = dB_to_coefficient (lower_db + y * range_db);
- } else if (alist->parameter().type() == PanAzimuthAutomation ||
- alist->parameter().type() == PanElevationAutomation) {
- y = 1.0 - y;
- y = max ((double) _desc.lower, y);
- y = min ((double) _desc.upper, y);
- } else if (alist->parameter().type() == PanWidthAutomation) {
- y = 2.0 * y - 1.0;
- y = max ((double) _desc.lower, y);
- y = min ((double) _desc.upper, y);
- } else {
- y = y * (double)(_desc.upper - _desc.lower) + _desc.lower;
- if (_desc.integer_step) {
- y = round(y);
- } else if (_desc.toggled) {
- y = (y > 0.5) ? 1.0 : 0.0;
+ if (alist->default_interpolation () != alist->interpolation()) {
+ switch (alist->interpolation()) {
+ case AutomationList::Linear:
+ y = y * (_desc.upper - _desc.lower) + _desc.lower;
+ return;
+ default:
+ assert (0);
+ break;
}
- y = max ((double) _desc.lower, y);
- y = min ((double) _desc.upper, y);
}
+ y = _desc.from_interface (y);
+}
+
+double
+AutomationLine::compute_delta (double from, double to) const
+{
+ return _desc.compute_delta (from, to);
+}
+
+void
+AutomationLine::apply_delta (double& val, double delta) const
+{
+ if (val == 0 && !_desc.is_linear () && delta >= 1.0) {
+ /* recover from -inf */
+ val = 1.0 / _height;
+ view_to_model_coord_y (val);
+ return;
+ }
+ val = _desc.apply_delta (val, delta);
}
void
AutomationLine::model_to_view_coord_y (double& y) const
{
- /* TODO: This should be more generic (use ParameterDescriptor) */
- if ( alist->parameter().type() == GainAutomation
- || alist->parameter().type() == EnvelopeAutomation
- || (_desc.logarithmic && _desc.lower == 0. && _desc.upper > _desc.lower)) {
- y = gain_to_slider_position_with_max (y, _desc.upper);
- } else if (alist->parameter().type() == TrimAutomation
- || (_desc.logarithmic && _desc.lower * _desc.upper > 0 && _desc.upper > _desc.lower)) {
- const double lower_db = accurate_coefficient_to_dB (_desc.lower);
- const double range_db = accurate_coefficient_to_dB (_desc.upper) - lower_db;
- y = (accurate_coefficient_to_dB (y) - lower_db) / range_db;
- } else if (alist->parameter().type() == PanAzimuthAutomation ||
- alist->parameter().type() == PanElevationAutomation) {
- y = 1.0 - y;
- } else if (alist->parameter().type() == PanWidthAutomation) {
- y = .5 + y * .5;
- } else {
- y = (y - _desc.lower) / (double)(_desc.upper - _desc.lower);
+ if (alist->default_interpolation () != alist->interpolation()) {
+ switch (alist->interpolation()) {
+ case AutomationList::Linear:
+ y = (y - _desc.lower) / (_desc.upper - _desc.lower);
+ return;
+ default:
+ assert (0);
+ break;
+ }
}
+ y = _desc.to_interface (y);
}
void
AutomationLine::interpolation_changed (AutomationList::InterpolationStyle style)
{
if (line_points.size() > 1) {
+ reset ();
line->set_steps(line_points, is_stepped());
}
}