#include <boost/scoped_ptr.hpp>
-#include <glibmm/spawn.h>
#include <gtkmm/messagedialog.h>
#include "pbd/error.h"
#include "pbd/xml++.h"
+#include "pbd/unwind.h"
+#include <gtkmm/alignment.h>
#include <gtkmm/stock.h>
#include <gtkmm/notebook.h>
#include <gtkmm2ext/utils.h>
#include "ardour/audio_backend.h"
#include "ardour/audioengine.h"
+#include "ardour/mtdm.h"
#include "ardour/rc_configuration.h"
+#include "ardour/types.h"
#include "pbd/convert.h"
#include "pbd/error.h"
+#include "ardour_ui.h"
#include "engine_dialog.h"
+#include "gui_thread.h"
#include "i18n.h"
using namespace std;
EngineControl::EngineControl ()
: ArdourDialog (_("Audio/MIDI Setup"))
+ , basic_packer (9, 3)
, input_latency_adjustment (0, 0, 99999, 1)
, input_latency (input_latency_adjustment)
, output_latency_adjustment (0, 0, 99999, 1)
, output_channels (output_channels_adjustment)
, ports_adjustment (128, 8, 1024, 1, 16)
, ports_spinner (ports_adjustment)
- , control_app_button (_("Launch Control App"))
- , basic_packer (9, 3)
+ , control_app_button (_("Device Control Panel"))
+ , lm_start_stop_label (_("Measure latency"))
+ , lm_use_button (_("Use results"))
+ , lm_table (5, 2)
+ , have_lm_results (false)
+ , midi_refresh_button (_("Refresh list"))
+ , aj_button (_("Start MIDI ALSA/JACK bridge"))
+ , ignore_changes (0)
+ , _desired_sample_rate (0)
{
+ if (!ARDOUR::AudioEngine::instance()->setup_required()) {
+ _have_control = false;
+ } else {
+ _have_control = true;
+ }
+
+ set_name (X_("AudioMIDISetup"));
+
build_notebook ();
get_vbox()->set_border_width (12);
get_vbox()->pack_start (notebook);
- Gtk::HBox* hpacker = manage (new HBox);
- hpacker->pack_start (control_app_button, false, false);
- hpacker->show ();
- control_app_button.show();
- get_vbox()->pack_start (*hpacker);
-
control_app_button.signal_clicked().connect (mem_fun (*this, &EngineControl::control_app_button_clicked));
manage_control_app_sensitivity ();
- add_button (Gtk::Stock::CANCEL, Gtk::RESPONSE_CANCEL);
- add_button (Gtk::Stock::OK, Gtk::RESPONSE_OK);
- add_button (Gtk::Stock::APPLY, Gtk::RESPONSE_APPLY);
+ cancel_button = add_button (Gtk::Stock::CANCEL, Gtk::RESPONSE_CANCEL);
+ ok_button = add_button (Gtk::Stock::OK, Gtk::RESPONSE_OK);
+ apply_button = add_button (Gtk::Stock::APPLY, Gtk::RESPONSE_APPLY);
/* Pick up any existing audio setup configuration, if appropriate */
XMLNode* audio_setup = ARDOUR::Config->extra_xml ("AudioMIDISetup");
+ /* push a change as if we altered the backend */
+ backend_changed ();
+
if (audio_setup) {
set_state (*audio_setup);
- }
+ }
}
void
switch (response_id) {
case RESPONSE_APPLY:
- setup_engine (true);
+ push_state_to_backend (true);
break;
case RESPONSE_OK:
- setup_engine (true);
+ push_state_to_backend (true);
hide ();
break;
+ case RESPONSE_DELETE_EVENT: {
+ GdkEventButton ev;
+ ev.type = GDK_BUTTON_PRESS;
+ ev.button = 1;
+ on_delete_event ((GdkEventAny*) &ev);
+ break;
+ }
default:
hide ();
}
set_popdown_strings (backend_combo, strings);
backend_combo.set_active_text (strings.front());
- backend_combo.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::backend_changed));
- backend_changed ();
-
- driver_combo.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::driver_changed));
basic_packer.set_spacings (6);
basic_packer.set_border_width (12);
row = 0;
- const AttachOptions xopt = AttachOptions (FILL|EXPAND);
+ AttachOptions xopt = AttachOptions (FILL|EXPAND);
label = manage (left_aligned_label (_("Audio System:")));
basic_packer.attach (*label, 0, 1, row, row + 1, xopt, (AttachOptions) 0);
basic_packer.attach (sample_rate_combo, 1, 2, row, row + 1, xopt, (AttachOptions) 0);
row++;
- sr_connection = sample_rate_combo.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::sample_rate_changed));
label = manage (left_aligned_label (_("Buffer size:")));
basic_packer.attach (*label, 0, 1, row, row + 1, xopt, (AttachOptions) 0);
basic_packer.attach (buffer_size_duration_label, 2, 3, row, row+1, xopt, (AttachOptions) 0);
row++;
- bs_connection = buffer_size_combo.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::buffer_size_changed));
+ input_channels.set_name ("InputChannels");
+ input_channels.set_flags(Gtk::CAN_FOCUS);
+ input_channels.set_digits(0);
+ input_channels.set_wrap(false);
+ output_channels.set_editable (true);
label = manage (left_aligned_label (_("Input Channels:")));
basic_packer.attach (*label, 0, 1, row, row+1, xopt, (AttachOptions) 0);
basic_packer.attach (input_channels, 1, 2, row, row+1, xopt, (AttachOptions) 0);
++row;
- input_channels.signal_output().connect (sigc::bind (sigc::ptr_fun (&EngineControl::print_channel_count), &input_channels));
+ output_channels.set_name ("OutputChannels");
+ output_channels.set_flags(Gtk::CAN_FOCUS);
+ output_channels.set_digits(0);
+ output_channels.set_wrap(false);
+ output_channels.set_editable (true);
label = manage (left_aligned_label (_("Output Channels:")));
basic_packer.attach (*label, 0, 1, row, row+1, xopt, (AttachOptions) 0);
basic_packer.attach (output_channels, 1, 2, row, row+1, xopt, (AttachOptions) 0);
++row;
- output_channels.signal_output().connect (sigc::bind (sigc::ptr_fun (&EngineControl::print_channel_count), &output_channels));
+ input_latency.set_name ("InputLatency");
+ input_latency.set_flags(Gtk::CAN_FOCUS);
+ input_latency.set_digits(0);
+ input_latency.set_wrap(false);
+ input_latency.set_editable (true);
label = manage (left_aligned_label (_("Hardware input latency:")));
basic_packer.attach (*label, 0, 1, row, row+1, xopt, (AttachOptions) 0);
basic_packer.attach (*label, 2, 3, row, row+1, xopt, (AttachOptions) 0);
++row;
+ output_latency.set_name ("OutputLatency");
+ output_latency.set_flags(Gtk::CAN_FOCUS);
+ output_latency.set_digits(0);
+ output_latency.set_wrap(false);
+ output_latency.set_editable (true);
+
label = manage (left_aligned_label (_("Hardware output latency:")));
basic_packer.attach (*label, 0, 1, row, row+1, xopt, (AttachOptions) 0);
basic_packer.attach (output_latency, 1, 2, row, row+1, xopt, (AttachOptions) 0);
basic_packer.attach (*label, 2, 3, row, row+1, xopt, (AttachOptions) 0);
++row;
- device_combo.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::device_changed));
-
basic_hbox.pack_start (basic_packer, false, false);
+ basic_vbox.pack_start (basic_hbox, false, false);
+
+ Gtk::HBox* hpacker = manage (new HBox);
+ hpacker->set_border_width (12);
+ hpacker->pack_start (control_app_button, false, false);
+ hpacker->show ();
+ control_app_button.show();
+ basic_vbox.pack_start (*hpacker);
+
+ /* latency measurement tab */
+
+ lm_title.set_markup (string_compose ("<span size=\"large\" weight=\"bold\">%1</span>", _("Latency Measurement Tool")));
+
+ row = 0;
+ lm_table.set_row_spacings (12);
+
+ lm_table.attach (lm_title, 0, 2, row, row+1, xopt, (AttachOptions) 0);
+ row++;
+
+ Gtk::Label* preamble;
+
+ preamble = manage (new Label);
+ preamble->set_width_chars (60);
+ preamble->set_line_wrap (true);
+ preamble->set_markup (_("<span weight=\"bold\">Turn down the volume on your hardware to a very low level.</span>"));
+
+ lm_table.attach (*preamble, 0, 2, row, row+1, AttachOptions(FILL|EXPAND), (AttachOptions) 0);
+ row++;
+
+ preamble = manage (new Label);
+ preamble->set_width_chars (60);
+ preamble->set_line_wrap (true);
+ preamble->set_markup (_("Select two channels below and connect them using a cable or (less ideally) a speaker and microphone."));
+
+ lm_table.attach (*preamble, 0, 2, row, row+1, AttachOptions(FILL|EXPAND), (AttachOptions) 0);
+ row++;
+
+ label = manage (new Label (_("Output channel")));
+ lm_table.attach (*label, 0, 1, row, row+1, xopt, (AttachOptions) 0);
+
+ Gtk::Alignment* misc_align = manage (new Alignment (0.0, 0.5));
+ misc_align->add (lm_output_channel_combo);
+ lm_table.attach (*misc_align, 1, 2, row, row+1, xopt, (AttachOptions) 0);
+ ++row;
+
+ label = manage (new Label (_("Input channel")));
+ lm_table.attach (*label, 0, 1, row, row+1, xopt, (AttachOptions) 0);
+
+ misc_align = manage (new Alignment (0.0, 0.5));
+ misc_align->add (lm_input_channel_combo);
+ lm_table.attach (*misc_align, 1, 2, row, row+1, FILL, (AttachOptions) 0);
+ ++row;
- midi_packer.set_border_width (12);
+ xopt = AttachOptions(0);
- notebook.pages().push_back (TabElem (basic_hbox, _("Audio")));
- notebook.pages().push_back (TabElem (midi_hbox, _("MIDI")));
+ lm_measure_button.add (lm_start_stop_label);
+
+ lm_measure_button.signal_toggled().connect (sigc::mem_fun (*this, &EngineControl::latency_button_toggled));
+ lm_use_button.signal_clicked().connect (sigc::mem_fun (*this, &EngineControl::use_latency_button_clicked));
+ lm_use_button.set_sensitive (false);
+
+
+ preamble = manage (new Label);
+ preamble->set_width_chars (60);
+ preamble->set_line_wrap (true);
+ preamble->set_markup (_("Once the channels are connected, click the \"Measure latency\" button."));
+ lm_table.attach (*preamble, 0, 2, row, row+1, AttachOptions(FILL|EXPAND), (AttachOptions) 0);
+ row++;
+
+ lm_table.attach (lm_measure_button, 0, 2, row, row+1, xopt, (AttachOptions) 0);
+ ++row;
+ lm_table.attach (lm_results, 0, 2, row, row+1, AttachOptions(FILL|EXPAND), (AttachOptions) 0);
+ ++row;
+
+
+ preamble = manage (new Label);
+ preamble->set_width_chars (60);
+ preamble->set_line_wrap (true);
+ preamble->set_markup (_("When satisfied with the results, click the \"Use results\" button."));
+ lm_table.attach (*preamble, 0, 2, row, row+1, AttachOptions(FILL|EXPAND), (AttachOptions) 0);
+ row++;
+
+ lm_table.attach (lm_use_button, 0, 2, row, row+1, xopt, (AttachOptions) 0);
+ ++row;
+
+ lm_results.set_markup ("<i>No measurement results yet</i>");
+
+ lm_vbox.set_border_width (12);
+ lm_vbox.pack_start (lm_table, false, false);
+
+ /* pack it all up */
+
+ notebook.pages().push_back (TabElem (basic_vbox, _("Audio")));
+ notebook.pages().push_back (TabElem (midi_vbox, _("MIDI")));
+ notebook.pages().push_back (TabElem (lm_vbox, _("Latency")));
notebook.set_border_width (12);
notebook.set_tab_pos (POS_RIGHT);
notebook.set_name ("SettingsNotebook");
+ /* Connect to signals */
+
+ backend_combo.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::backend_changed));
+ driver_combo.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::driver_changed));
+ sample_rate_combo.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::sample_rate_changed));
+ buffer_size_combo.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::buffer_size_changed));
+ device_combo.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::device_changed));
+
+ input_latency.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::parameter_changed));
+ output_latency.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::parameter_changed));
+ input_channels.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::parameter_changed));
+ output_channels.signal_changed().connect (sigc::mem_fun (*this, &EngineControl::parameter_changed));
+
+ input_channels.signal_output().connect (sigc::bind (sigc::ptr_fun (&EngineControl::print_channel_count), &input_channels));
+ output_channels.signal_output().connect (sigc::bind (sigc::ptr_fun (&EngineControl::print_channel_count), &output_channels));
+
+ notebook.signal_switch_page().connect (sigc::mem_fun (*this, &EngineControl::on_switch_page));
}
EngineControl::~EngineControl ()
}
+void
+EngineControl::disable_latency_tab ()
+{
+ vector<string> empty;
+ set_popdown_strings (lm_output_channel_combo, empty);
+ set_popdown_strings (lm_input_channel_combo, empty);
+ lm_measure_button.set_sensitive (false);
+ lm_use_button.set_sensitive (false);
+}
+
+void
+EngineControl::enable_latency_tab ()
+{
+ vector<string> outputs;
+ ARDOUR::AudioEngine::instance()->get_physical_outputs (ARDOUR::DataType::AUDIO, outputs);
+ set_popdown_strings (lm_output_channel_combo, outputs);
+ lm_output_channel_combo.set_active_text (outputs.front());
+
+ vector<string> inputs;
+ ARDOUR::AudioEngine::instance()->get_physical_inputs (ARDOUR::DataType::AUDIO, inputs);
+ set_popdown_strings (lm_input_channel_combo, inputs);
+ lm_input_channel_combo.set_active_text (inputs.front());
+
+ lm_measure_button.set_sensitive (true);
+}
+
+void
+EngineControl::setup_midi_tab_for_backend ()
+{
+ string backend = backend_combo.get_active_text ();
+
+ Gtkmm2ext::container_clear (midi_vbox);
+
+ midi_vbox.set_border_width (12);
+ midi_device_table.set_border_width (12);
+
+ if (backend == "JACK") {
+ setup_midi_tab_for_jack ();
+ }
+
+ midi_vbox.pack_start (midi_device_table, true, true);
+ midi_vbox.pack_start (midi_refresh_button, false, false);
+ midi_vbox.show_all ();
+
+ midi_refresh_button.signal_clicked().connect (sigc::mem_fun (*this, &EngineControl::refresh_midi_display));
+}
+
+void
+EngineControl::setup_midi_tab_for_jack ()
+{
+ midi_vbox.pack_start (aj_button, false, false);
+}
+
+void
+EngineControl::refresh_midi_display ()
+{
+ boost::shared_ptr<ARDOUR::AudioBackend> backend = ARDOUR::AudioEngine::instance()->current_backend();
+ assert (backend);
+
+ vector<string> midi_inputs;
+ vector<string> midi_outputs;
+ int row = 0;
+ AttachOptions xopt = AttachOptions (FILL|EXPAND);
+ Gtk::Label* l;
+
+ Gtkmm2ext::container_clear (midi_device_table);
+
+ backend->get_physical_inputs (ARDOUR::DataType::MIDI, midi_inputs);
+ backend->get_physical_outputs (ARDOUR::DataType::MIDI, midi_outputs);
+
+ midi_device_table.set_spacings (6);
+ midi_device_table.set_homogeneous (true);
+ midi_device_table.resize (midi_inputs.size() + midi_outputs.size() + 3, 1);
+
+ l = manage (new Label);
+ l->set_markup (string_compose ("<span size=\"large\" weight=\"bold\">%1</span>", _("MIDI Inputs")));
+ midi_device_table.attach (*l, 0, 1, row, row + 1, xopt, AttachOptions (0));
+ l->set_alignment (0, 0.5);
+ row++;
+ l->show ();
+
+ for (vector<string>::iterator p = midi_inputs.begin(); p != midi_inputs.end(); ++p) {
+ l = manage (new Label ((*p).substr ((*p).find_last_of (':') + 1)));
+ l->set_alignment (0, 0.5);
+ midi_device_table.attach (*l, 0, 1, row, row + 1, xopt, AttachOptions (0));
+ l->show ();
+ row++;
+ }
+
+ row++; // extra row of spacing
+
+ l = manage (new Label);
+ l->set_markup (string_compose ("<span size=\"large\" weight=\"bold\">%1</span>", _("MIDI Outputs")));
+ midi_device_table.attach (*l, 0, 1, row, row + 1, xopt, AttachOptions (0));
+ l->set_alignment (0, 0.5);
+ row++;
+ l->show ();
+
+ for (vector<string>::iterator p = midi_outputs.begin(); p != midi_outputs.end(); ++p) {
+ l = manage (new Label ((*p).substr ((*p).find_last_of (':') + 1)));
+ l->set_alignment (0, 0.5);
+ midi_device_table.attach (*l, 0, 1, row, row + 1, xopt, AttachOptions (0));
+ l->show ();
+ row++;
+ }
+}
+
void
EngineControl::backend_changed ()
{
+ if (ignore_changes) {
+ return;
+ }
+
string backend_name = backend_combo.get_active_text();
boost::shared_ptr<ARDOUR::AudioBackend> backend;
if (!(backend = ARDOUR::AudioEngine::instance()->set_backend (backend_name, "ardour", ""))) {
- /* eh? */
+ /* eh? setting the backend failed... how ? */
return;
}
+ setup_midi_tab_for_backend ();
+
if (backend->requires_driver_selection()) {
vector<string> drivers = backend->enumerate_drivers();
driver_combo.set_sensitive (true);
list_devices ();
}
- maybe_set_state ();
+ maybe_display_saved_state ();
}
bool
available_devices.push_back (i->name);
}
+ ignore_changes++;
set_popdown_strings (device_combo, available_devices);
- set_popdown_strings (input_device_combo, available_devices);
- set_popdown_strings (output_device_combo, available_devices);
-
+ ignore_changes--;
+
if (!available_devices.empty()) {
+ sample_rate_combo.set_sensitive (true);
+ buffer_size_combo.set_sensitive (true);
+ input_latency.set_sensitive (true);
+ output_latency.set_sensitive (true);
+ input_channels.set_sensitive (true);
+ output_channels.set_sensitive (true);
+
+ /* changing the text in the combo will trigger device_changed()
+ which should populate the parameter controls
+ */
+
device_combo.set_active_text (available_devices.front());
- input_device_combo.set_active_text (available_devices.front());
- output_device_combo.set_active_text (available_devices.front());
+ } else {
+ sample_rate_combo.set_sensitive (true);
+ buffer_size_combo.set_sensitive (true);
+ input_latency.set_sensitive (true);
+ output_latency.set_sensitive (true);
+ input_channels.set_sensitive (true);
+ output_channels.set_sensitive (true);
}
-
- device_changed ();
}
void
EngineControl::driver_changed ()
{
+ if (ignore_changes) {
+ return;
+ }
+
boost::shared_ptr<ARDOUR::AudioBackend> backend = ARDOUR::AudioEngine::instance()->current_backend();
assert (backend);
backend->set_driver (driver_combo.get_active_text());
list_devices ();
- maybe_set_state ();
+ maybe_display_saved_state ();
}
void
EngineControl::device_changed ()
{
+ if (ignore_changes) {
+ return;
+ }
+
boost::shared_ptr<ARDOUR::AudioBackend> backend = ARDOUR::AudioEngine::instance()->current_backend();
assert (backend);
string device_name = device_combo.get_active_text ();
recursive call to this method.
*/
- sr_connection.block ();
+ ignore_changes++;
/* sample rates */
+
+ string desired;
vector<float> sr = backend->available_sample_rates (device_name);
for (vector<float>::const_iterator x = sr.begin(); x != sr.end(); ++x) {
- char buf[32];
- if (fmod (*x, 1000.0f)) {
- snprintf (buf, sizeof (buf), "%.1f kHz", (*x)/1000.0);
- } else {
- snprintf (buf, sizeof (buf), "%.0f kHz", (*x)/1000.0);
+ s.push_back (rate_as_string (*x));
+ if (*x == _desired_sample_rate) {
+ desired = s.back();
}
- s.push_back (buf);
}
- set_popdown_strings (sample_rate_combo, s);
- sample_rate_combo.set_active_text (s.front());
-
- sr_connection.unblock ();
+ if (!s.empty()) {
+ set_popdown_strings (sample_rate_combo, s);
+
+ if (desired.empty()) {
+ sample_rate_combo.set_active_text (s.front());
+ } else {
+ sample_rate_combo.set_active_text (desired);
+ }
+ } else {
+ /* hmm ... how to tell the user about the fact that we have no
+ * available sample rates.
+ */
+ }
+
vector<uint32_t> bs = backend->available_buffer_sizes(device_name);
s.clear ();
for (vector<uint32_t>::const_iterator x = bs.begin(); x != bs.end(); ++x) {
- char buf[32];
- /* Translators: "samples" is always plural here, so no
- need for plural+singular forms.
- */
- snprintf (buf, sizeof (buf), _("%u samples"), *x);
- s.push_back (buf);
+ s.push_back (bufsize_as_string (*x));
}
- set_popdown_strings (buffer_size_combo, s);
- buffer_size_combo.set_active_text (s.front());
- show_buffer_duration ();
+ if (!s.empty()) {
+ set_popdown_strings (buffer_size_combo, s);
+ buffer_size_combo.set_active_text (s.front());
+ show_buffer_duration ();
+ } else {
+ /* hmm ... how to tell the user about the fact that we have no
+ * available buffer sizes.
+ */
+ }
manage_control_app_sensitivity ();
- maybe_set_state ();
+ ignore_changes--;
+
+ /* pick up any saved state for this device */
+
+ maybe_display_saved_state ();
+
+ /* and push it to the backend */
+
+ push_state_to_backend (false);
}
+string
+EngineControl::rate_as_string (float r)
+{
+ char buf[32];
+ if (fmod (r, 1000.0f)) {
+ snprintf (buf, sizeof (buf), "%.1f kHz", r/1000.0);
+ } else {
+ snprintf (buf, sizeof (buf), "%.0f kHz", r/1000.0);
+ }
+ return buf;
+}
+
+string
+EngineControl::bufsize_as_string (uint32_t sz)
+{
+ /* Translators: "samples" is always plural here, so no
+ need for plural+singular forms.
+ */
+ char buf[32];
+ snprintf (buf, sizeof (buf), _("%u samples"), sz);
+ return buf;
+}
+
void
EngineControl::sample_rate_changed ()
{
+ if (ignore_changes) {
+ return;
+ }
+
/* reset the strings for buffer size to show the correct msec value
(reflecting the new sample rate).
*/
void
EngineControl::buffer_size_changed ()
{
+ if (ignore_changes) {
+ return;
+ }
+
show_buffer_duration ();
save_state ();
}
}
void
-EngineControl::audio_mode_changed ()
+EngineControl::parameter_changed ()
{
- std::string str = audio_mode_combo.get_active_text();
-
- if (str == _("Playback/recording on 1 device")) {
- input_device_combo.set_sensitive (false);
- output_device_combo.set_sensitive (false);
- } else if (str == _("Playback/recording on 2 devices")) {
- input_device_combo.set_sensitive (true);
- output_device_combo.set_sensitive (true);
- } else if (str == _("Playback only")) {
- output_device_combo.set_sensitive (true);
- input_device_combo.set_sensitive (false);
- } else if (str == _("Recording only")) {
- input_device_combo.set_sensitive (true);
- output_device_combo.set_sensitive (false);
+ if (!ignore_changes) {
+ save_state ();
}
}
}
EngineControl::State*
-EngineControl::get_current_state ()
+EngineControl::get_saved_state_for_currently_displayed_backend_and_device ()
{
boost::shared_ptr<ARDOUR::AudioBackend> backend = ARDOUR::AudioEngine::instance()->current_backend();
if (backend) {
return get_matching_state (backend_combo.get_active_text(),
- (backend->requires_driver_selection() ? (std::string) driver_combo.get_active_text() : string()),
- device_combo.get_active_text());
+ (backend->requires_driver_selection() ? (std::string) driver_combo.get_active_text() : string()),
+ device_combo.get_active_text());
}
device_combo.get_active_text());
}
-void
+EngineControl::State*
EngineControl::save_state ()
{
bool existing = true;
- State* state = get_current_state ();
+ State* state = get_saved_state_for_currently_displayed_backend_and_device ();
if (!state) {
existing = false;
state = new State;
}
- state->backend = backend_combo.get_active_text ();
- state->driver = driver_combo.get_active_text ();
- state->device = device_combo.get_active_text ();
- state->buffer_size = buffer_size_combo.get_active_text ();
- state->sample_rate = sample_rate_combo.get_active_text ();
- state->input_latency = (uint32_t) input_latency.get_value();
- state->output_latency = (uint32_t) output_latency.get_value();
- state->input_channels = (uint32_t) input_channels.get_value();
- state->output_channels = (uint32_t) output_channels.get_value();
+ store_state (*state);
if (!existing) {
states.push_back (*state);
}
+
+ return state;
}
void
-EngineControl::maybe_set_state ()
+EngineControl::store_state (State& state)
{
- State* state = get_current_state ();
+ state.backend = get_backend ();
+ state.driver = get_driver ();
+ state.device = get_device_name ();
+ state.sample_rate = get_rate ();
+ state.buffer_size = get_buffer_size ();
+ state.input_latency = get_input_latency ();
+ state.output_latency = get_output_latency ();
+ state.input_channels = get_input_channels ();
+ state.output_channels = get_output_channels ();
+}
+
+void
+EngineControl::maybe_display_saved_state ()
+{
+ State* state = get_saved_state_for_currently_displayed_backend_and_device ();
if (state) {
- sr_connection.block ();
- bs_connection.block ();
- sample_rate_combo.set_active_text (state->sample_rate);
- buffer_size_combo.set_active_text (state->buffer_size);
+ ignore_changes++;
+ if (!_desired_sample_rate) {
+ sample_rate_combo.set_active_text (rate_as_string (state->sample_rate));
+ }
+ buffer_size_combo.set_active_text (bufsize_as_string (state->buffer_size));
+ /* call this explicitly because we're ignoring changes to
+ the controls at this point.
+ */
+ show_buffer_duration ();
input_latency.set_value (state->input_latency);
output_latency.set_value (state->output_latency);
- bs_connection.unblock ();
- sr_connection.unblock ();
+ ignore_changes--;
}
}
if ((prop = grandchild->property ("sample-rate")) == 0) {
continue;
}
- state.sample_rate = prop->value ();
+ state.sample_rate = atof (prop->value ());
if ((prop = grandchild->property ("buffer-size")) == 0) {
continue;
}
- state.buffer_size = prop->value ();
+ state.buffer_size = atoi (prop->value ());
if ((prop = grandchild->property ("input-latency")) == 0) {
continue;
for (StateList::const_iterator i = states.begin(); i != states.end(); ++i) {
if ((*i).active) {
- sr_connection.block ();
- bs_connection.block ();
+ ignore_changes++;
backend_combo.set_active_text ((*i).backend);
driver_combo.set_active_text ((*i).driver);
device_combo.set_active_text ((*i).device);
- sample_rate_combo.set_active_text ((*i).sample_rate);
- buffer_size_combo.set_active_text ((*i).buffer_size);
+ sample_rate_combo.set_active_text (rate_as_string ((*i).sample_rate));
+ buffer_size_combo.set_active_text (bufsize_as_string ((*i).buffer_size));
input_latency.set_value ((*i).input_latency);
output_latency.set_value ((*i).output_latency);
- sr_connection.unblock ();
- bs_connection.unblock ();
+ ignore_changes--;
break;
}
}
}
+
int
-EngineControl::setup_engine (bool start)
+EngineControl::push_state_to_backend (bool start)
{
boost::shared_ptr<ARDOUR::AudioBackend> backend = ARDOUR::AudioEngine::instance()->current_backend();
- assert (backend);
- /* grab the parameters from the GUI and apply them */
+ if (!backend) {
+ return 0;
+ }
+
+ /* figure out what is going to change */
+
+ bool restart_required = false;
+ bool was_running = ARDOUR::AudioEngine::instance()->running();
+ bool change_driver = false;
+ bool change_device = false;
+ bool change_rate = false;
+ bool change_bufsize = false;
+ bool change_latency = false;
+ bool change_channels = false;
+
+ uint32_t ochan = get_output_channels ();
+ uint32_t ichan = get_input_channels ();
+
+ if (_have_control) {
+
+ /* we can control the backend */
- try {
if (backend->requires_driver_selection()) {
- if (backend->set_driver (get_driver())) {
- return -1;
+ if (get_driver() != backend->driver_name()) {
+ change_driver = true;
}
}
- if (backend->set_device_name (get_device_name())) {
- return -1;
+ if (get_device_name() != backend->device_name()) {
+ change_device = true;
}
- if (backend->set_sample_rate (get_rate())) {
- error << string_compose (_("Cannot set sample rate to %1"), get_rate()) << endmsg;
- return -1;
+ if (get_rate() != backend->sample_rate()) {
+ change_rate = true;
}
- if (backend->set_buffer_size (get_buffer_size())) {
- error << string_compose (_("Cannot set buffer size to %1"), get_buffer_size()) << endmsg;
- return -1;
+
+ if (get_buffer_size() != backend->buffer_size()) {
+ change_bufsize = true;
}
- if (backend->set_input_channels (get_input_channels())) {
- error << string_compose (_("Cannot set input channels to %1"), get_input_channels()) << endmsg;
- return -1;
+
+ /* zero-requested channels means "all available" */
+
+ if (ichan == 0) {
+ ichan = backend->input_channels();
}
- if (backend->set_output_channels (get_output_channels())) {
- error << string_compose (_("Cannot set output channels to %1"), get_output_channels()) << endmsg;
- return -1;
+
+ if (ochan == 0) {
+ ochan = backend->output_channels();
}
- if (backend->set_systemic_input_latency (get_input_latency())) {
- error << string_compose (_("Cannot set input latency to %1"), get_input_latency()) << endmsg;
- return -1;
+
+ if (ichan != backend->input_channels()) {
+ change_channels = true;
}
- if (backend->set_systemic_output_latency (get_output_latency())) {
- error << string_compose (_("Cannot set output latency to %1"), get_output_latency()) << endmsg;
- return -1;
+
+ if (ochan != backend->output_channels()) {
+ change_channels = true;
}
- /* get a pointer to the current state object, creating one if
- * necessary
+ if (get_input_latency() != backend->systemic_input_latency() ||
+ get_output_latency() != backend->systemic_output_latency()) {
+ change_latency = true;
+ }
+
+ } else {
+
+ /* we have no control over the backend, meaning that we can
+ * only possibly change sample rate and buffer size.
*/
- State* state = get_current_state ();
- if (!state) {
- save_state ();
- state = get_current_state ();
- assert (state);
+ if (get_rate() != backend->sample_rate()) {
+ change_bufsize = true;
}
- /* all off */
-
- for (StateList::iterator i = states.begin(); i != states.end(); ++i) {
- (*i).active = false;
+ if (get_buffer_size() != backend->buffer_size()) {
+ change_bufsize = true;
}
+ }
- /* mark this one active (to be used next time the dialog is
- * shown)
+ if (!_have_control) {
+
+ /* We do not have control over the backend, so the best we can
+ * do is try to change the sample rate and/or bufsize and get
+ * out of here.
*/
- state->active = true;
+ if (change_rate && !backend->can_change_sample_rate_when_running()) {
+ return 1;
+ }
+
+ if (change_bufsize && !backend->can_change_buffer_size_when_running()) {
+ return 1;
+ }
- if (start) {
- if (ARDOUR::AudioEngine::instance()->start()) {
- return -1;
- }
+ if (change_rate) {
+ backend->set_sample_rate (get_rate());
}
+
+ if (change_bufsize) {
+ backend->set_buffer_size (get_buffer_size());
+ }
+
+ post_push ();
- manage_control_app_sensitivity ();
return 0;
+ }
+
+ /* determine if we need to stop the backend before changing parameters */
+
+ if (change_driver || change_device || change_channels || change_latency ||
+ (change_rate && !backend->can_change_sample_rate_when_running()) ||
+ (change_bufsize && !backend->can_change_buffer_size_when_running())) {
+ restart_required = true;
+ } else {
+ restart_required = false;
+ }
+
+ if (was_running) {
+
+ if (!change_driver && !change_device && !change_channels && !change_latency) {
+ /* no changes in any parameters that absolutely require a
+ * restart, so check those that might be changeable without a
+ * restart
+ */
+
+ if (change_rate && !backend->can_change_sample_rate_when_running()) {
+ /* can't do this while running ... */
+ restart_required = true;
+ }
+
+ if (change_bufsize && !backend->can_change_buffer_size_when_running()) {
+ /* can't do this while running ... */
+ restart_required = true;
+ }
+ }
+ }
- } catch (...) {
- cerr << "exception thrown...\n";
+ if (was_running) {
+ if (restart_required) {
+ if (ARDOUR_UI::instance()->disconnect_from_engine ()) {
+ return -1;
+ }
+ }
+ }
+
+
+ if (change_driver && backend->set_driver (get_driver())) {
+ error << string_compose (_("Cannot set driver to %1"), get_driver()) << endmsg;
+ return -1;
+ }
+ if (change_device && backend->set_device_name (get_device_name())) {
+ error << string_compose (_("Cannot set device name to %1"), get_device_name()) << endmsg;
+ return -1;
+ }
+ if (change_rate && backend->set_sample_rate (get_rate())) {
+ error << string_compose (_("Cannot set sample rate to %1"), get_rate()) << endmsg;
+ return -1;
+ }
+ if (change_bufsize && backend->set_buffer_size (get_buffer_size())) {
+ error << string_compose (_("Cannot set buffer size to %1"), get_buffer_size()) << endmsg;
return -1;
}
+
+ if (change_channels || get_input_channels() == 0 || get_output_channels() == 0) {
+ if (backend->set_input_channels (get_input_channels())) {
+ error << string_compose (_("Cannot set input channels to %1"), get_input_channels()) << endmsg;
+ return -1;
+ }
+ if (backend->set_output_channels (get_output_channels())) {
+ error << string_compose (_("Cannot set output channels to %1"), get_output_channels()) << endmsg;
+ return -1;
+ }
+ }
+ if (change_latency) {
+ if (backend->set_systemic_input_latency (get_input_latency())) {
+ error << string_compose (_("Cannot set input latency to %1"), get_input_latency()) << endmsg;
+ return -1;
+ }
+ if (backend->set_systemic_output_latency (get_output_latency())) {
+ error << string_compose (_("Cannot set output latency to %1"), get_output_latency()) << endmsg;
+ return -1;
+ }
+ }
+
+ if (start || (was_running && restart_required)) {
+ if (ARDOUR_UI::instance()->reconnect_to_engine()) {
+ return -1;
+ }
+ }
+
+ post_push ();
+
+ return 0;
}
-uint32_t
+void
+EngineControl::post_push ()
+{
+ /* get a pointer to the current state object, creating one if
+ * necessary
+ */
+
+ State* state = get_saved_state_for_currently_displayed_backend_and_device ();
+
+ if (!state) {
+ state = save_state ();
+ assert (state);
+ }
+
+ /* all off */
+
+ for (StateList::iterator i = states.begin(); i != states.end(); ++i) {
+ (*i).active = false;
+ }
+
+ /* mark this one active (to be used next time the dialog is
+ * shown)
+ */
+
+ state->active = true;
+
+ manage_control_app_sensitivity ();
+
+ /* schedule a redisplay of MIDI ports */
+
+ Glib::signal_timeout().connect (sigc::bind_return (sigc::mem_fun (*this, &EngineControl::refresh_midi_display), false), 1000);
+}
+
+
+float
EngineControl::get_rate () const
{
- double r = atof (sample_rate_combo.get_active_text ());
+ float r = atof (sample_rate_combo.get_active_text ());
/* the string may have been translated with an abbreviation for
* thousands, so use a crude heuristic to fix this.
*/
if (r < 1000.0) {
r *= 1000.0;
}
- return lrint (r);
+ return r;
}
+
uint32_t
EngineControl::get_buffer_size () const
return (uint32_t) output_latency_adjustment.get_value();
}
+string
+EngineControl::get_backend () const
+{
+ return backend_combo.get_active_text ();
+}
+
string
EngineControl::get_driver () const
{
void
EngineControl::control_app_button_clicked ()
{
+ boost::shared_ptr<ARDOUR::AudioBackend> backend = ARDOUR::AudioEngine::instance()->current_backend();
+
+ if (!backend) {
+ return;
+ }
+
+ backend->launch_control_app ();
+}
- const string appname = g_getenv ("ARDOUR_DEVICE_CONTROL_APP");
-
- if (appname.empty()) {
- boost::shared_ptr<ARDOUR::AudioBackend> backend = ARDOUR::AudioEngine::instance()->current_backend();
-
- if (!backend) {
- return;
- }
-
- string appname = backend->control_app_name();
+void
+EngineControl::manage_control_app_sensitivity ()
+{
+ boost::shared_ptr<ARDOUR::AudioBackend> backend = ARDOUR::AudioEngine::instance()->current_backend();
+
+ if (!backend) {
+ return;
}
+
+ string appname = backend->control_app_name();
if (appname.empty()) {
- return;
+ control_app_button.set_sensitive (false);
+ } else {
+ control_app_button.set_sensitive (true);
}
+}
- std::list<string> args;
- args.push_back (appname);
- Glib::spawn_async ("", args, Glib::SPAWN_SEARCH_PATH);
+void
+EngineControl::set_desired_sample_rate (uint32_t sr)
+{
+ _desired_sample_rate = sr;
+ device_changed ();
}
void
-EngineControl::manage_control_app_sensitivity ()
+EngineControl::on_switch_page (GtkNotebookPage*, guint page_num)
{
- const string appname = g_getenv ("ARDOUR_DEVICE_CONTROL_APP");
+ if (page_num == 0) {
+ cancel_button->set_sensitive (true);
+ ok_button->set_sensitive (true);
+ apply_button->set_sensitive (true);
+ } else {
+ cancel_button->set_sensitive (false);
+ ok_button->set_sensitive (false);
+ apply_button->set_sensitive (false);
+ }
- if (appname.empty()) {
- boost::shared_ptr<ARDOUR::AudioBackend> backend = ARDOUR::AudioEngine::instance()->current_backend();
-
- if (!backend) {
- return;
+ if (page_num == 1) {
+ /* MIDI tab */
+ refresh_midi_display ();
+ }
+
+ if (page_num == 2) {
+ /* latency tab */
+
+ if (!ARDOUR::AudioEngine::instance()->running()) {
+
+ PBD::Unwinder<uint32_t> protect_ignore_changes (ignore_changes, ignore_changes + 1);
+
+ /* save any existing latency values */
+
+ uint32_t il = (uint32_t) input_latency.get_value ();
+ uint32_t ol = (uint32_t) input_latency.get_value ();
+
+ /* reset to zero so that our new test instance of JACK
+ will be clean of any existing latency measures.
+ */
+
+ input_latency.set_value (0);
+ output_latency.set_value (0);
+
+ /* reset control */
+
+ input_latency.set_value (il);
+ output_latency.set_value (ol);
+
+ }
+
+ if (ARDOUR::AudioEngine::instance()->prepare_for_latency_measurement()) {
+ disable_latency_tab ();
}
-
- string appname = backend->control_app_name();
+
+ enable_latency_tab ();
+
+ } else {
+ ARDOUR::AudioEngine::instance()->stop_latency_detection();
}
+}
- if (appname.empty()) {
- control_app_button.set_sensitive (false);
+/* latency measurement */
+
+bool
+EngineControl::check_latency_measurement ()
+{
+ MTDM* mtdm = ARDOUR::AudioEngine::instance()->mtdm ();
+
+ if (mtdm->resolve () < 0) {
+ lm_results.set_markup (string_compose ("<span foreground=\"red\">%1</span>", _("No signal detected ")));
+ return true;
+ }
+
+ if (mtdm->err () > 0.3) {
+ mtdm->invert ();
+ mtdm->resolve ();
+ }
+
+ char buf[128];
+ ARDOUR::framecnt_t const sample_rate = ARDOUR::AudioEngine::instance()->sample_rate();
+
+ if (sample_rate == 0) {
+ lm_results.set_text (_("Disconnected from audio engine"));
+ ARDOUR::AudioEngine::instance()->stop_latency_detection ();
+ return false;
+ }
+
+ uint32_t frames_total = mtdm->del();
+ uint32_t extra = frames_total - ARDOUR::AudioEngine::instance()->latency_signal_delay();
+
+ snprintf (buf, sizeof (buf), "%u samples %10.3lf ms", extra, extra * 1000.0f/sample_rate);
+
+ bool solid = true;
+
+ if (mtdm->err () > 0.2) {
+ strcat (buf, " ??");
+ solid = false;
+ }
+
+ if (mtdm->inv ()) {
+ strcat (buf, " (Inv)");
+ solid = false;
+ }
+
+ if (solid) {
+ lm_measure_button.set_active (false);
+ lm_use_button.set_sensitive (true);
+ strcat (buf, " (set)");
+ have_lm_results = true;
+ }
+
+ lm_results.set_text (buf);
+
+ return true;
+}
+
+void
+EngineControl::start_latency_detection ()
+{
+ ARDOUR::AudioEngine::instance()->set_latency_input_port (lm_input_channel_combo.get_active_text());
+ ARDOUR::AudioEngine::instance()->set_latency_output_port (lm_output_channel_combo.get_active_text());
+ ARDOUR::AudioEngine::instance()->start_latency_detection ();
+ lm_results.set_text (_("Detecting ..."));
+ latency_timeout = Glib::signal_timeout().connect (mem_fun (*this, &EngineControl::check_latency_measurement), 250);
+ lm_start_stop_label.set_text (_("Cancel measurement"));
+ have_lm_results = false;
+ lm_input_channel_combo.set_sensitive (false);
+ lm_output_channel_combo.set_sensitive (false);
+}
+
+void
+EngineControl::end_latency_detection ()
+{
+ ARDOUR::AudioEngine::instance()->stop_latency_detection ();
+ latency_timeout.disconnect ();
+ lm_start_stop_label.set_text (_("Measure latency"));
+ if (!have_lm_results) {
+ lm_results.set_markup ("<i>No measurement results yet</i>");
+ }
+ lm_input_channel_combo.set_sensitive (true);
+ lm_output_channel_combo.set_sensitive (true);
+}
+
+void
+EngineControl::latency_button_toggled ()
+{
+ if (lm_measure_button.get_active ()) {
+ start_latency_detection ();
} else {
- control_app_button.set_sensitive (true);
+ end_latency_detection ();
+ }
+}
+
+void
+EngineControl::use_latency_button_clicked ()
+{
+ MTDM* mtdm = ARDOUR::AudioEngine::instance()->mtdm ();
+
+ if (!mtdm) {
+ return;
+ }
+
+ uint32_t frames_total = mtdm->del();
+ uint32_t extra = frames_total - ARDOUR::AudioEngine::instance()->latency_signal_delay();
+ uint32_t one_way = extra/2;
+
+ input_latency_adjustment.set_value (one_way);
+ output_latency_adjustment.set_value (one_way);
+}
+
+bool
+EngineControl::on_delete_event (GdkEventAny* ev)
+{
+ if (notebook.get_current_page() == 2) {
+ /* currently on latency tab - be sure to clean up */
+ end_latency_detection ();
}
+ return ArdourDialog::on_delete_event (ev);
}
+