#include "gtkmm2ext/actions.h"
#include "gtkmm2ext/motionfeedback.h"
-#include "ardour/dB.h"
#include "ardour/monitor_processor.h"
#include "ardour/route.h"
-#include "ardour/utils.h"
#include "ardour_ui.h"
#include "gui_thread.h"
: AxisView (s)
, RouteUI (s)
, _tearoff (0)
+ , channel_table_viewport (*channel_table_scroller.get_hadjustment(),
+ *channel_table_scroller.get_vadjustment ())
, gain_control (0)
, dim_control (0)
, solo_boost_control (0)
, solo_cut_control (0)
- , solo_in_place_button (solo_model_group, _("SiP"))
- , afl_button (solo_model_group, _("AFL"))
- , pfl_button (solo_model_group, _("PFL"))
- , cut_all_button (ArdourButton::led_default_elements)
- , dim_all_button (ArdourButton::led_default_elements)
- , mono_button (ArdourButton::led_default_elements)
+ , solo_in_place_button (_("SiP"), ArdourButton::led_default_elements)
+ , afl_button (_("AFL"), ArdourButton::led_default_elements)
+ , pfl_button (_("PFL"), ArdourButton::led_default_elements)
, exclusive_solo_button (ArdourButton::led_default_elements)
, solo_mute_override_button (ArdourButton::led_default_elements)
+ , _inhibit_solo_model_update (false)
{
Glib::RefPtr<Action> act;
rude_audition_button.signal_button_press_event().connect (sigc::mem_fun(*this, &MonitorSection::cancel_audition));
UI::instance()->set_tip (rude_audition_button, _("When active, auditioning is active.\nClick to stop the audition"));
+ solo_in_place_button.set_name ("monitor section solo model");
+ afl_button.set_name ("monitor section solo model");
+ pfl_button.set_name ("monitor section solo model");
+
solo_model_box.set_spacing (6);
solo_model_box.pack_start (solo_in_place_button, true, false);
solo_model_box.pack_start (afl_button, true, false);
act = ActionManager::get_action (X_("Solo"), X_("solo-use-in-place"));
ARDOUR_UI::instance()->tooltips().set_tip (solo_in_place_button, _("Solo controls affect solo-in-place"));
if (act) {
- act->connect_proxy (solo_in_place_button);
+ solo_in_place_button.set_related_action (act);
}
act = ActionManager::get_action (X_("Solo"), X_("solo-use-afl"));
ARDOUR_UI::instance()->tooltips().set_tip (afl_button, _("Solo controls toggle after-fader-listen"));
if (act) {
- act->connect_proxy (afl_button);
+ afl_button.set_related_action (act);
}
act = ActionManager::get_action (X_("Solo"), X_("solo-use-pfl"));
ARDOUR_UI::instance()->tooltips().set_tip (pfl_button, _("Solo controls toggle pre-fader-listen"));
if (act) {
- act->connect_proxy (pfl_button);
+ pfl_button.set_related_action (act);
}
/* Solo Boost */
act = ActionManager::get_action (X_("Monitor"), X_("monitor-cut-all"));
if (act) {
cut_all_button.set_related_action (act);
- }
+ }
dim_all_button.set_text (_("dim"));
dim_all_button.set_name ("monitor section dim");
channel_table_scroller.set_size_request (-1, 150);
channel_table_scroller.set_shadow_type (Gtk::SHADOW_NONE);
channel_table_scroller.show ();
-
+ channel_table_scroller.add (channel_table_viewport);
+
channel_size_group = SizeGroup::create (SIZE_GROUP_HORIZONTAL);
channel_size_group->add_widget (channel_table_header);
channel_size_group->add_widget (channel_table);
Label* l1 = manage (new Label (X_("out")));
l1->set_name (X_("MonitorSectionLabel"));
channel_table_header.attach (*l1, 0, 1, 0, 1, EXPAND|FILL);
- l1 = manage (new Label (X_("cut")));
+ l1 = manage (new Label (X_("mute")));
l1->set_name (X_("MonitorSectionLabel"));
channel_table_header.attach (*l1, 1, 2, 0, 1, EXPAND|FILL);
l1 = manage (new Label (X_("dim")));
/* catch changes that affect us */
- Config->ParameterChanged.connect (config_connection, invalidator (*this), ui_bind (&MonitorSection::parameter_changed, this, _1), gui_context());
+ Config->ParameterChanged.connect (config_connection, invalidator (*this), boost::bind (&MonitorSection::parameter_changed, this, _1), gui_context());
}
MonitorSection::~MonitorSection ()
if (channel_table_scroller.get_parent()) {
/* scroller is packed, so remove it */
channel_table_packer.remove (channel_table_scroller);
- /* remove the table_hpacker from the scroller */
- channel_table_scroller.remove ();
}
- if (table_hpacker.get_parent ()) {
+ if (table_hpacker.get_parent () == &channel_table_packer) {
/* this occurs when the table hpacker is directly
packed, so remove it.
*/
channel_table_packer.remove (table_hpacker);
+ } else if (table_hpacker.get_parent()) {
+ channel_table_viewport.remove ();
}
if (_monitor->output_streams().n_audio() > 7) {
/* put the table into a scrolled window, and then put
* that into the channel vpacker, after the table header
*/
- channel_table_scroller.add (table_hpacker);
+ channel_table_viewport.add (table_hpacker);
channel_table_packer.pack_start (channel_table_scroller, true, true);
+ channel_table_viewport.show ();
channel_table_scroller.show ();
} else {
}
MonitorSection::ChannelButtonSet::ChannelButtonSet ()
- : cut (ArdourButton::just_led_default_elements)
- , dim (ArdourButton::just_led_default_elements)
- , solo (ArdourButton::just_led_default_elements)
- , invert (ArdourButton::just_led_default_elements)
{
cut.set_diameter (3);
dim.set_diameter (3);
channel_table.show_all ();
}
-void
-MonitorSection::set_button_names ()
-{
- rec_enable_button_label.set_text ("rec");
- mute_button_label.set_text ("rec");
- solo_button_label.set_text ("rec");
-}
-
void
MonitorSection::toggle_exclusive_solo ()
{
if (act) {
Glib::RefPtr<ToggleAction> tact = Glib::RefPtr<ToggleAction>::cast_dynamic(act);
_monitor->set_cut_all (tact->get_active());
- }
+ }
}
void
if (act) {
Glib::RefPtr<RadioAction> ract = Glib::RefPtr<RadioAction>::cast_dynamic (act);
if (ract) {
+ if (!ract->get_active ()) {
+ /* We are turning SiP off, which means that AFL or PFL will be turned on
+ shortly; don't update the solo model in the mean time, as if the currently
+ configured listen position is not the one that is about to be turned on,
+ things will go wrong.
+ */
+ _inhibit_solo_model_update = true;
+ }
Config->set_solo_control_is_listen_control (!ract->get_active());
+ _inhibit_solo_model_update = false;
}
}
}
Glib::RefPtr<RadioAction> ract = Glib::RefPtr<RadioAction>::cast_dynamic (act);
if (ract) {
if (ract->get_active()) {
- Config->set_listen_position (AfterFaderListen);
Config->set_solo_control_is_listen_control (true);
+ Config->set_listen_position (AfterFaderListen);
}
}
}
active.
*/
- Glib::RefPtr<Action> act = ActionManager::get_action (X_("Solo"), X_("solo-use-afl"));
+ Glib::RefPtr<Action> act = ActionManager::get_action (X_("Solo"), X_("solo-use-pfl"));
if (act) {
Glib::RefPtr<RadioAction> ract = Glib::RefPtr<RadioAction>::cast_dynamic (act);
if (ract) {
if (ract->get_active()) {
- Config->set_listen_position (PreFaderListen);
Config->set_solo_control_is_listen_control (true);
+ Config->set_listen_position (PreFaderListen);
}
}
}
void
MonitorSection::update_solo_model ()
{
+ if (_inhibit_solo_model_update) {
+ return;
+ }
+
const char* action_name = 0;
Glib::RefPtr<Action> act;
act = ActionManager::get_action (X_("Solo"), action_name);
if (act) {
+
Glib::RefPtr<RadioAction> ract = Glib::RefPtr<RadioAction>::cast_dynamic (act);
if (ract) {
+ /* because these are radio buttons, one of them will be
+ active no matter what. to trigger a change in the
+ action so that the view picks it up, toggle it.
+ */
+ if (ract->get_active()) {
+ ract->set_active (false);
+ }
ract->set_active (true);
}
+
}
}
}
if (_session->is_auditioning()) {
- if (onoff) {
- rude_audition_button.set_active_state (Gtkmm2ext::Active);
- } else {
- rude_audition_button.unset_active_state ();
- }
+ rude_audition_button.set_active (onoff);
} else {
- rude_audition_button.unset_active_state ();
+ rude_audition_button.set_active (false);
}
}
}
if (_session->soloing() || _session->listening()) {
- if (onoff) {
- rude_solo_button.set_active_state (Gtkmm2ext::Active);
- } else {
- rude_solo_button.unset_active_state ();
- }
+ rude_solo_button.set_active (onoff);
if (_session->soloing()) {
if (_session->solo_isolated()) {
- rude_iso_button.set_active_state (Gtkmm2ext::Active);
+ rude_iso_button.set_active (false);
}
- }
+ }
} else {
- // rude_solo_button.set_active (false);
- rude_solo_button.unset_active_state ();
- rude_iso_button.unset_active_state ();
+ rude_solo_button.set_active (false);
+ rude_iso_button.set_active (false);
}
}
void
MonitorSection::parameter_changed (std::string name)
{
- if (name == "solo-control-is-listen-control" ||
- name == "listen-position") {
+ if (name == "solo-control-is-listen-control") {
+ update_solo_model ();
+ } else if (name == "listen-position") {
update_solo_model ();
}
}
projects / ardour.git / blobdiff