#include <gtkmm/scale.h>
#include <gtkmm2ext/utils.h>
#include <gtkmm2ext/slider_controller.h>
+#include <gtkmm2ext/gtk_ui.h>
#include "pbd/fpu.h"
#include "pbd/cpus.h"
-#include "midi++/manager.h"
-
#include "ardour/audioengine.h"
#include "ardour/dB.h"
#include "ardour/rc_configuration.h"
#include "ardour/control_protocol_manager.h"
+#include "ardour/plugin_manager.h"
#include "control_protocol/control_protocol.h"
#include "ardour_window.h"
Table* t = manage (new Table (2, 3));
t->set_spacings (4);
- Label* l = manage (new Label (_("Click audio file:")));
- l->set_alignment (0, 0.5);
+ Label* l = manage (left_aligned_label (_("Click audio file:")));
t->attach (*l, 0, 1, 0, 1, FILL);
t->attach (_click_path_entry, 1, 2, 0, 1, FILL);
Button* b = manage (new Button (_("Browse...")));
b->signal_clicked().connect (sigc::mem_fun (*this, &ClickOptions::click_browse_clicked));
t->attach (*b, 2, 3, 0, 1, FILL);
- l = manage (new Label (_("Click emphasis audio file:")));
- l->set_alignment (0, 0.5);
+ l = manage (left_aligned_label (_("Click emphasis audio file:")));
t->attach (*l, 0, 1, 1, 2, FILL);
t->attach (_click_emphasis_path_entry, 1, 2, 1, 2, FILL);
b = manage (new Button (_("Browse...")));
void click_browse_clicked ()
{
- SoundFileChooser sfdb (*_parent, _("Choose Click"));
-
- sfdb.show_all ();
- sfdb.present ();
+ SoundFileChooser sfdb (_("Choose Click"));
if (sfdb.run () == RESPONSE_OK) {
click_chosen (sfdb.get_filename());
void click_emphasis_browse_clicked ()
{
- SoundFileChooser sfdb (*_parent, _("Choose Click Emphasis"));
+ SoundFileChooser sfdb (_("Choose Click Emphasis"));
sfdb.show_all ();
sfdb.present ();
_limit_undo_spin.set_range (0, 512);
_limit_undo_spin.set_increments (1, 10);
t->attach (_limit_undo_spin, 1, 2, 0, 1, FILL | EXPAND);
- Label* l = manage (new Label (_("commands")));
- l->set_alignment (0, 0.5);
+ Label* l = manage (left_aligned_label (_("commands")));
t->attach (*l, 2, 3, 0, 1);
t->attach (_save_undo_button, 0, 1, 1, 2, FILL);
_save_undo_spin.set_range (0, 512);
_save_undo_spin.set_increments (1, 10);
t->attach (_save_undo_spin, 1, 2, 1, 2, FILL | EXPAND);
- l = manage (new Label (_("commands")));
- l->set_alignment (0, 0.5);
+ l = manage (left_aligned_label (_("commands")));
t->attach (*l, 2, 3, 1, 2);
_box->pack_start (*t);
Table* t = manage (new Table (4, 4));
t->set_spacings (4);
- Label* l = manage (new Label (_("Edit using:")));
+ Label* l = manage (left_aligned_label (_("Edit using:")));
l->set_name ("OptionsLabel");
- l->set_alignment (0, 0.5);
t->attach (*l, 0, 1, 0, 1, FILL | EXPAND, FILL);
t->attach (_edit_modifier_combo, 1, 2, 0, 1, FILL | EXPAND, FILL);
}
}
- l = manage (new Label (_("Delete using:")));
+ l = manage (left_aligned_label (_("Delete using:")));
l->set_name ("OptionsLabel");
- l->set_alignment (0, 0.5);
t->attach (*l, 0, 1, 1, 2, FILL | EXPAND, FILL);
t->attach (_delete_modifier_combo, 1, 2, 1, 2, FILL | EXPAND, FILL);
}
}
- l = manage (new Label (_("Insert note using:")));
+ l = manage (left_aligned_label (_("Insert note using:")));
l->set_name ("OptionsLabel");
- l->set_alignment (0, 0.5);
t->attach (*l, 0, 1, 2, 3, FILL | EXPAND, FILL);
t->attach (_insert_note_modifier_combo, 1, 2, 2, 3, FILL | EXPAND, FILL);
}
}
- l = manage (new Label (_("Toggle snap using:")));
+ l = manage (left_aligned_label (_("Ignore snap using:")));
l->set_name ("OptionsLabel");
- l->set_alignment (0, 0.5);
t->attach (*l, 0, 1, 3, 4, FILL | EXPAND, FILL);
t->attach (_snap_modifier_combo, 1, 2, 3, 4, FILL | EXPAND, FILL);
_keyboard_layout_selector.set_active_text (Keyboard::current_binding_name());
_keyboard_layout_selector.signal_changed().connect (sigc::mem_fun (*this, &KeyboardOptions::bindings_changed));
- l = manage (new Label (_("Keyboard layout:")));
+ l = manage (left_aligned_label (_("Keyboard layout:")));
l->set_name ("OptionsLabel");
- l->set_alignment (0, 0.5);
t->attach (*l, 0, 1, 4, 5, FILL | EXPAND, FILL);
t->attach (_keyboard_layout_selector, 1, 2, 4, 5, FILL | EXPAND, FILL);
_dpi_adjustment (50, 50, 250, 1, 10),
_dpi_slider (_dpi_adjustment)
{
- _dpi_adjustment.set_value (_rc_config->get_font_scale () / 1024);
+ _dpi_adjustment.set_value (floor (_rc_config->get_font_scale () / 1024));
Label* l = manage (new Label (_("Font scaling:")));
l->set_name ("OptionsLabel");
void parameter_changed (string const & p)
{
if (p == "font-scale") {
- _dpi_adjustment.set_value (_rc_config->get_font_scale() / 1024);
+ _dpi_adjustment.set_value (floor (_rc_config->get_font_scale() / 1024));
}
}
public:
ControlSurfacesOptions (Gtk::Window& parent)
: _parent (parent)
+ , _ignore_view_change (0)
{
_store = ListStore::create (_model);
_view.set_model (_store);
- _view.append_column (_("Name"), _model.name);
+ _view.append_column (_("Control Surface Protocol"), _model.name);
_view.get_column(0)->set_resizable (true);
_view.get_column(0)->set_expand (true);
_view.append_column_editable (_("Enabled"), _model.enabled);
_box->pack_start (*label, false, false);
label->show ();
- _store->signal_row_changed().connect (sigc::mem_fun (*this, &ControlSurfacesOptions::model_changed));
+ ControlProtocolManager& m = ControlProtocolManager::instance ();
+ m.ProtocolStatusChange.connect (protocol_status_connection, MISSING_INVALIDATOR,
+ boost::bind (&ControlSurfacesOptions::protocol_status_changed, this, _1), gui_context());
+
+ _store->signal_row_changed().connect (sigc::mem_fun (*this, &ControlSurfacesOptions::view_changed));
_view.signal_button_press_event().connect_notify (sigc::mem_fun(*this, &ControlSurfacesOptions::edit_clicked));
}
private:
- void model_changed (TreeModel::Path const &, TreeModel::iterator const & i)
+ void protocol_status_changed (ControlProtocolInfo* cpi) {
+ /* find the row */
+ TreeModel::Children rows = _store->children();
+
+ for (TreeModel::Children::iterator x = rows.begin(); x != rows.end(); ++x) {
+ string n = ((*x)[_model.name]);
+
+ if ((*x)[_model.protocol_info] == cpi) {
+ _ignore_view_change++;
+ (*x)[_model.enabled] = (cpi->protocol || cpi->requested);
+ _ignore_view_change--;
+ break;
+ }
+ }
+ }
+
+ void view_changed (TreeModel::Path const &, TreeModel::iterator const & i)
{
TreeModel::Row r = *i;
+ if (_ignore_view_change) {
+ return;
+ }
+
ControlProtocolInfo* cpi = r[_model.protocol_info];
if (!cpi) {
return;
bool const was_enabled = (cpi->protocol != 0);
bool const is_enabled = r[_model.enabled];
+
if (was_enabled != is_enabled) {
+
if (!was_enabled) {
- ControlProtocolManager::instance().instantiate (*cpi);
+ ControlProtocolManager::instance().activate (*cpi);
} else {
- ControlProtocolManager::instance().teardown (*cpi);
+ Gtk::Window* win = r[_model.editor];
+ if (win) {
+ win->hide ();
+ }
+
+ ControlProtocolManager::instance().deactivate (*cpi);
+
+ if (win) {
+ delete win;
+ r[_model.editor] = 0;
+ }
}
}
ControlSurfacesModelColumns _model;
TreeView _view;
Gtk::Window& _parent;
+ PBD::ScopedConnection protocol_status_connection;
+ uint32_t _ignore_view_change;
+};
+
+class VideoTimelineOptions : public OptionEditorBox
+{
+public:
+ VideoTimelineOptions (RCConfiguration* c)
+ : _rc_config (c)
+ , _show_video_export_info_button (_("Show Video Export Info before export"))
+ , _show_video_server_dialog_button (_("Show Video Server Startup Dialog"))
+ , _video_advanced_setup_button (_("Advanced Setup (remote video server)"))
+ {
+ Table* t = manage (new Table (2, 6));
+ t->set_spacings (4);
+
+ t->attach (_video_advanced_setup_button, 0, 2, 0, 1);
+ _video_advanced_setup_button.signal_toggled().connect (sigc::mem_fun (*this, &VideoTimelineOptions::video_advanced_setup_toggled));
+ Gtkmm2ext::UI::instance()->set_tip (_video_advanced_setup_button,
+ _("<b>When enabled</b> you can speficify a custom video-server URL and docroot. - Do not enable this option unless you know what you are doing."));
+
+ Label* l = manage (new Label (_("Video Server URL:")));
+ l->set_alignment (0, 0.5);
+ t->attach (*l, 0, 1, 1, 2, FILL);
+ t->attach (_video_server_url_entry, 1, 2, 1, 2, FILL);
+ Gtkmm2ext::UI::instance()->set_tip (_video_server_url_entry,
+ _("Base URL of the video-server including http prefix. This is usually 'http://hostname.example.org:1554/' and defaults to 'http://localhost:1554/' when the video-server is running locally"));
+
+ l = manage (new Label (_("Video Folder:")));
+ l->set_alignment (0, 0.5);
+ t->attach (*l, 0, 1, 2, 3, FILL);
+ t->attach (_video_server_docroot_entry, 1, 2, 2, 3);
+ Gtkmm2ext::UI::instance()->set_tip (_video_server_docroot_entry,
+ _("Local path to the video-server document-root. Only files below this directory will be accessible by the video-server. If the server run on a remote host, it should point to a network mounted folder of the server's docroot or be left empty if it is unvailable. It is used for the local video-monitor and file-browsing when opening/adding a video file."));
+
+ /* small vspace y=3..4 */
+
+ t->attach (_show_video_export_info_button, 0, 2, 4, 5);
+ _show_video_export_info_button.signal_toggled().connect (sigc::mem_fun (*this, &VideoTimelineOptions::show_video_export_info_toggled));
+ Gtkmm2ext::UI::instance()->set_tip (_show_video_export_info_button,
+ _("<b>When enabled</b> an information window with details is displayed before the video-export dialog."));
+
+ t->attach (_show_video_server_dialog_button, 0, 2, 5, 6);
+ _show_video_server_dialog_button.signal_toggled().connect (sigc::mem_fun (*this, &VideoTimelineOptions::show_video_server_dialog_toggled));
+ Gtkmm2ext::UI::instance()->set_tip (_show_video_server_dialog_button,
+ _("<b>When enabled</b> the video server is never launched automatically without confirmation"));
+
+ _video_server_url_entry.signal_changed().connect (sigc::mem_fun(*this, &VideoTimelineOptions::server_url_changed));
+ _video_server_url_entry.signal_activate().connect (sigc::mem_fun(*this, &VideoTimelineOptions::server_url_changed));
+ _video_server_docroot_entry.signal_changed().connect (sigc::mem_fun(*this, &VideoTimelineOptions::server_docroot_changed));
+ _video_server_docroot_entry.signal_activate().connect (sigc::mem_fun(*this, &VideoTimelineOptions::server_docroot_changed));
+
+ _box->pack_start (*t,true,true);
+ }
+
+ void server_url_changed ()
+ {
+ _rc_config->set_video_server_url (_video_server_url_entry.get_text());
+ }
+
+ void server_docroot_changed ()
+ {
+ _rc_config->set_video_server_docroot (_video_server_docroot_entry.get_text());
+ }
+
+ void show_video_export_info_toggled ()
+ {
+ bool const x = _show_video_export_info_button.get_active ();
+ _rc_config->set_show_video_export_info (x);
+ }
+
+ void show_video_server_dialog_toggled ()
+ {
+ bool const x = _show_video_server_dialog_button.get_active ();
+ _rc_config->set_show_video_server_dialog (x);
+ }
+
+ void video_advanced_setup_toggled ()
+ {
+ bool const x = _video_advanced_setup_button.get_active ();
+ _rc_config->set_video_advanced_setup(x);
+ }
+
+ void parameter_changed (string const & p)
+ {
+ if (p == "video-server-url") {
+ _video_server_url_entry.set_text (_rc_config->get_video_server_url());
+ } else if (p == "video-server-docroot") {
+ _video_server_docroot_entry.set_text (_rc_config->get_video_server_docroot());
+ } else if (p == "show-video-export-info") {
+ bool const x = _rc_config->get_show_video_export_info();
+ _show_video_export_info_button.set_active (x);
+ } else if (p == "show-video-server-dialog") {
+ bool const x = _rc_config->get_show_video_server_dialog();
+ _show_video_server_dialog_button.set_active (x);
+ } else if (p == "video-advanced-setup") {
+ bool const x = _rc_config->get_video_advanced_setup();
+ _video_advanced_setup_button.set_active(x);
+ _video_server_docroot_entry.set_sensitive(x);
+ _video_server_url_entry.set_sensitive(x);
+ }
+ }
+
+ void set_state_from_config ()
+ {
+ parameter_changed ("video-server-url");
+ parameter_changed ("video-server-docroot");
+ parameter_changed ("video-monitor-setup-dialog");
+ parameter_changed ("show-video-export-info");
+ parameter_changed ("show-video-server-dialog");
+ parameter_changed ("video-advanced-setup");
+ }
+
+private:
+ RCConfiguration* _rc_config;
+ Entry _video_server_url_entry;
+ Entry _video_server_docroot_entry;
+ CheckButton _show_video_export_info_button;
+ CheckButton _show_video_server_dialog_button;
+ CheckButton _video_advanced_setup_button;
};
/** A class which allows control of visibility of some editor components usign
add_widget_to_page (p, _visibility_group->list_view ());
}
+ Gtk::Widget& tip_widget() { return *_visibility_group->list_view (); }
+
private:
void changed ()
{
};
+
RCOptionEditor::RCOptionEditor ()
: OptionEditor (Config, string_compose (_("%1 Preferences"), PROGRAM_NAME))
, _rc_config (Config)
/* MISC */
uint32_t hwcpus = hardware_concurrency ();
+ BoolOption* bo;
+ BoolComboOption* bco;
if (hwcpus > 1) {
add_option (_("Misc"), new OptionEditorHeading (_("DSP CPU Utilization")));
sigc::mem_fun (*_rc_config, &RCConfiguration::set_periodic_safety_backups)
));
- add_option (_("Misc"), new OptionEditorHeading (_("Misc")));
+ add_option (_("Misc"), new OptionEditorHeading (_("Session Management")));
add_option (_("Misc"),
new BoolOption (
add_option (_("Misc"),
new FaderOption (
"click-gain",
- _("Click Gain Level"),
+ _("Click gain level"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_click_gain),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_click_gain)
));
+ add_option (_("Misc"), new OptionEditorHeading (_("Automation")));
+
+ add_option (_("Misc"),
+ new SpinOption<double> (
+ "automation-thinning-factor",
+ _("Thinning factor (larger value => less data)"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_automation_thinning_factor),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_automation_thinning_factor),
+ 0, 1000, 1, 20
+ ));
+
+ add_option (_("Misc"),
+ new SpinOption<double> (
+ "automation-interval-msecs",
+ _("Automation sampling interval (milliseconds)"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_automation_interval_msecs),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_automation_interval_msecs),
+ 1, 1000, 1, 20
+ ));
+
/* TRANSPORT */
- add_option (_("Transport"),
- new BoolOption (
+ BoolOption* tsf;
+
+ tsf = new BoolOption (
"latched-record-enable",
_("Keep record-enable engaged on stop"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_latched_record_enable),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_latched_record_enable)
- ));
+ );
+ // Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _(""));
+ add_option (_("Transport"), tsf);
- add_option (_("Transport"),
- new BoolOption (
+ tsf = new BoolOption (
"stop-recording-on-xrun",
_("Stop recording when an xrun occurs"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_stop_recording_on_xrun),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_stop_recording_on_xrun)
- ));
+ );
+ Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(),
+ string_compose (_("<b>When enabled</b> %1 will stop recording if an over- or underrun is detected by the audio engine"),
+ PROGRAM_NAME));
+ add_option (_("Transport"), tsf);
- add_option (_("Transport"),
- new BoolOption (
+ tsf = new BoolOption (
"create-xrun-marker",
_("Create markers where xruns occur"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_create_xrun_marker),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_create_xrun_marker)
- ));
+ );
+ // Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _(""));
+ add_option (_("Transport"), tsf);
- add_option (_("Transport"),
- new BoolOption (
+ tsf = new BoolOption (
"stop-at-session-end",
_("Stop at the end of the session"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_stop_at_session_end),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_stop_at_session_end)
- ));
-
- add_option (_("Transport"),
- new BoolOption (
+ );
+ Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(),
+ string_compose (_("<b>When enabled</b> if %1 is <b>not recording</b>, it will stop the transport "
+ "when it reaches the current session end marker\n\n"
+ "<b>When disabled</b> %1 will continue to roll past the session end marker at all times"),
+ PROGRAM_NAME));
+ add_option (_("Transport"), tsf);
+
+ tsf = new BoolOption (
"seamless-loop",
- _("Do seamless looping (not possible when slaved to MTC, JACK etc)"),
+ _("Do seamless looping (not possible when slaved to MTC, LTC etc)"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_seamless_loop),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_seamless_loop)
- ));
-
- add_option (_("Transport"),
- new BoolOption (
- "primary-clock-delta-edit-cursor",
- _("Primary clock delta to edit cursor"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_primary_clock_delta_edit_cursor),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_primary_clock_delta_edit_cursor)
- ));
-
- add_option (_("Transport"),
- new BoolOption (
- "secondary-clock-delta-edit-cursor",
- _("Secondary clock delta to edit cursor"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_secondary_clock_delta_edit_cursor),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_secondary_clock_delta_edit_cursor)
- ));
-
- add_option (_("Transport"),
- new BoolOption (
+ );
+ Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(),
+ string_compose (_("<b>When enabled</b> this will loop by reading ahead and wrapping around at the loop point, "
+ "preventing any need to do a transport locate at the end of the loop\n\n"
+ "<b>When disabled</b> looping is done by locating back to the start of the loop when %1 reaches the end "
+ "which will often cause a small click or delay"), PROGRAM_NAME));
+ add_option (_("Transport"), tsf);
+
+ tsf = new BoolOption (
"disable-disarm-during-roll",
_("Disable per-track record disarm while rolling"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_disable_disarm_during_roll),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_disable_disarm_during_roll)
- ));
+ );
+ Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _("<b>When enabled</b> this will prevent you from accidentally stopping specific tracks recording during a take"));
+ add_option (_("Transport"), tsf);
- add_option (_("Transport"),
- new BoolOption (
+ tsf = new BoolOption (
"quieten_at_speed",
_("12dB gain reduction during fast-forward and fast-rewind"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_quieten_at_speed),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_quieten_at_speed)
- ));
+ );
+ Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _("This will reduce the unpleasant increase in perceived volume "
+ "that occurs when fast-forwarding or rewinding through some kinds of audio"));
+ add_option (_("Transport"), tsf);
+
+ add_option (_("Transport"), new OptionEditorHeading (S_("Sync/Slave")));
+
+ _sync_source = new ComboOption<SyncSource> (
+ "sync-source",
+ _("External timecode source"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_sync_source),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_sync_source)
+ );
+
+ populate_sync_options ();
+ add_option (_("Transport"), _sync_source);
+
+ _sync_framerate = new BoolOption (
+ "timecode-sync-frame-rate",
+ _("Match session video frame rate to external timecode"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_timecode_sync_frame_rate),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_timecode_sync_frame_rate)
+ );
+ Gtkmm2ext::UI::instance()->set_tip
+ (_sync_framerate->tip_widget(),
+ string_compose (_("This option controls the value of the video frame rate <i>while chasing</i> an external timecode source.\n\n"
+ "<b>When enabled</b> the session video frame rate will be changed to match that of the selected external timecode source.\n\n"
+ "<b>When disabled</b> the session video frame rate will not be changed to match that of the selected external timecode source."
+ "Instead the frame rate indication in the main clock will flash red and %1 will convert between the external "
+ "timecode standard and the session standard."), PROGRAM_NAME));
+
+ add_option (_("Transport"), _sync_framerate);
+
+ _sync_genlock = new BoolOption (
+ "timecode-source-is-synced",
+ _("External timecode is sync locked"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_timecode_source_is_synced),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_timecode_source_is_synced)
+ );
+ Gtkmm2ext::UI::instance()->set_tip
+ (_sync_genlock->tip_widget(),
+ _("<b>When enabled</b> indicates that the selected external timecode source shares sync (Black & Burst, Wordclock, etc) with the audio interface."));
+
+
+ add_option (_("Transport"), _sync_genlock);
+
+ _sync_source_2997 = new BoolOption (
+ "timecode-source-2997",
+ _("Lock to 29.9700 fps instead of 30000/1001"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_timecode_source_2997),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_timecode_source_2997)
+ );
+ Gtkmm2ext::UI::instance()->set_tip
+ (_sync_source_2997->tip_widget(),
+ _("<b>When enabled</b> the external timecode source is assumed to use 29.97 fps instead of 30000/1001.\n"
+ "SMPTE 12M-1999 specifies 29.97df as 30000/1001. The spec further mentions that "
+ "drop-frame timecode has an accumulated error of -86ms over a 24-hour period.\n"
+ "Drop-frame timecode would compensate exactly for a NTSC color frame rate of 30 * 0.9990 (ie 29.970000). "
+ "That is not the actual rate. However, some vendors use that rate - despite it being against the specs - "
+ "because the variant of using exactly 29.97 fps has zero timecode drift.\n"
+ ));
+
+ add_option (_("Transport"), _sync_source_2997);
+
+ add_option (_("Transport"), new OptionEditorHeading (S_("LTC Reader")));
+
+ _ltc_port = new ComboStringOption (
+ "ltc-source-port",
+ _("LTC incoming port"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_ltc_source_port),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_ltc_source_port)
+ );
+
+ vector<string> physical_inputs;
+ physical_inputs.push_back (_("None"));
+ AudioEngine::instance()->get_physical_inputs (DataType::AUDIO, physical_inputs);
+ _ltc_port->set_popdown_strings (physical_inputs);
+
+ add_option (_("Transport"), _ltc_port);
+
+ // TODO; rather disable this button than not compile it..
+ add_option (_("Transport"), new OptionEditorHeading (S_("LTC Generator")));
+
+ add_option (_("Transport"),
+ new BoolOption (
+ "send-ltc",
+ _("Enable LTC generator"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_send_ltc),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_send_ltc)
+ ));
+
+ _ltc_send_continuously = new BoolOption (
+ "ltc-send-continuously",
+ _("send LTC while stopped"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_ltc_send_continuously),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_ltc_send_continuously)
+ );
+ Gtkmm2ext::UI::instance()->set_tip
+ (_ltc_send_continuously->tip_widget(),
+ string_compose (_("<b>When enabled</b> %1 will continue to send LTC information even when the transport (playhead) is not moving"), PROGRAM_NAME));
+ add_option (_("Transport"), _ltc_send_continuously);
+
+ _ltc_volume_adjustment = new Gtk::Adjustment(-18, -50, 0, .5, 5);
+ _ltc_volume_adjustment->set_value (20 * log10(_rc_config->get_ltc_output_volume()));
+ _ltc_volume_adjustment->signal_value_changed().connect (sigc::mem_fun (*this, &RCOptionEditor::ltc_generator_volume_changed));
+ _ltc_volume_slider = new HSliderOption("ltcvol", _("LTC generator level"), *_ltc_volume_adjustment);
+
+ Gtkmm2ext::UI::instance()->set_tip
+ (_ltc_volume_slider->tip_widget(),
+ _("Specify the Peak Volume of the generated LTC signal in dbFS. A good value is 0dBu ^= -18dbFS in an EBU calibrated system"));
+
+ add_option (_("Transport"), _ltc_volume_slider);
+ parameter_changed ("send-ltc");
+
+ parameter_changed ("sync-source");
/* EDITOR */
add_option (_("Editor"),
new BoolOption (
+ "show-editor-meter",
+ _("Display master-meter in the toolbar"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_show_editor_meter),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_show_editor_meter)
+ ));
+
+ bco = new BoolComboOption (
"use-overlap-equivalency",
- _("Use overlap equivalency for regions"),
+ _("Regions in active edit groups are edited together"),
+ _("whenever they overlap in time"),
+ _("only if they have identical length, position and origin"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_use_overlap_equivalency),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_use_overlap_equivalency)
- ));
+ );
+
+ add_option (_("Editor"), bco);
add_option (_("Editor"),
new BoolOption (
));
add_option (_("Editor"),
- new BoolOption (
+ new BoolComboOption (
"show-region-gain-envelopes",
_("Show gain envelopes in audio regions"),
+ _("in all modes"),
+ _("only in region gain mode"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_show_region_gain),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_show_region_gain)
));
sigc::mem_fun (*_rc_config, &RCConfiguration::set_update_editor_during_summary_drag)
));
- add_option (_("Editor"),
- new BoolOption (
- "sync-all-route-ordering",
- _("Synchronise editor and mixer track order"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_sync_all_route_ordering),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_sync_all_route_ordering)
- ));
-
add_option (_("Editor"),
new BoolOption (
"link-editor-and-mixer-selection",
sigc::mem_fun (*_rc_config, &RCConfiguration::set_link_editor_and_mixer_selection)
));
- add_option (_("Editor"),
- new BoolOption (
+ bo = new BoolOption (
"name-new-markers",
_("Name new markers"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_name_new_markers),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_name_new_markers)
- ));
+ );
+
+ add_option (_("Editor"), bo);
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(), _("If enabled, popup a dialog when a new marker is created to allow its name to be set as it is created."
+ "\n\nYou can always rename markers by right-clicking on them"));
+
+ add_option (_("Editor"),
+ new BoolOption (
+ "autoscroll-editor",
+ _("Auto-scroll editor window when dragging near its edges"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_autoscroll_editor),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_autoscroll_editor)
+ ));
/* AUDIO */
add_option (_("Audio"), new OptionEditorHeading (_("Monitoring")));
- add_option (_("Audio"),
- new BoolOption (
- "use-monitor-bus",
- _("Use a monitor bus (allows AFL/PFL and more control)"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_use_monitor_bus),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_use_monitor_bus)
- ));
-
ComboOption<MonitorModel>* mm = new ComboOption<MonitorModel> (
"monitoring-model",
_("Record monitoring handled by"),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_monitoring_model)
);
-#ifndef __APPLE__
- /* no JACK monitoring on CoreAudio */
- if (AudioEngine::instance()->can_request_hardware_monitoring()) {
- mm->add (HardwareMonitoring, _("JACK"));
+ if (AudioEngine::instance()->port_engine().can_monitor_input()) {
+ mm->add (HardwareMonitoring, _("via Audio Driver"));
}
-#endif
+
mm->add (SoftwareMonitoring, _("ardour"));
mm->add (ExternalMonitoring, _("audio hardware"));
add_option (_("Audio"),
new BoolOption (
"plugins-stop-with-transport",
- _("Flush plugins when the transport is stopped"),
+ _("Silence plugins when the transport is stopped"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_plugins_stop_with_transport),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_plugins_stop_with_transport)
));
- add_option (_("Audio"),
- new BoolOption (
- "do-not-record-plugins",
- _("Disable plugins during recording"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_do_not_record_plugins),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_do_not_record_plugins)
- ));
-
add_option (_("Audio"),
new BoolOption (
"new-plugins-active",
/* SOLO AND MUTE */
+ add_option (_("Solo / mute"), new OptionEditorHeading (_("Solo")));
+
add_option (_("Solo / mute"),
new FaderOption (
"solo-mute-gain",
sigc::mem_fun (*_rc_config, &RCConfiguration::set_mute_affects_main_outs)
));
+ add_option (_("Solo / mute"), new OptionEditorHeading (_("Send Routing")));
+
+ add_option (_("Solo / mute"),
+ new BoolOption (
+ "link-send-and-route-panner",
+ _("Link panners of Aux and External Sends with main panner by default"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_link_send_and_route_panner),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_link_send_and_route_panner)
+ ));
+
add_option (_("MIDI"),
new BoolOption (
"send-midi-clock",
sigc::mem_fun (*_rc_config, &RCConfiguration::set_sound_midi_notes)
));
+ add_option (_("MIDI"), new OptionEditorHeading (_("Midi Audition")));
+
+ ComboOption<std::string>* audition_synth = new ComboOption<std::string> (
+ "midi-audition-synth-uri",
+ _("Midi Audition Synth (LV2)"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_midi_audition_synth_uri),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_midi_audition_synth_uri)
+ );
+
+ audition_synth->add(X_(""), _("None"));
+ PluginInfoList all_plugs;
+ PluginManager& manager (PluginManager::instance());
+#ifdef LV2_SUPPORT
+ all_plugs.insert (all_plugs.end(), manager.lv2_plugin_info().begin(), manager.lv2_plugin_info().end());
+
+ for (PluginInfoList::const_iterator i = all_plugs.begin(); i != all_plugs.end(); ++i) {
+ if (manager.get_status (*i) == PluginManager::Hidden) continue;
+ if (!(*i)->is_instrument()) continue;
+ if ((*i)->type != ARDOUR::LV2) continue;
+ audition_synth->add((*i)->unique_id, (*i)->name);
+ }
+#endif
+
+ add_option (_("MIDI"), audition_synth);
+
/* USER INTERACTION */
+ if (getenv ("ARDOUR_BUNDLED")) {
+ add_option (_("User interaction"),
+ new BoolOption (
+ "enable-translation",
+ string_compose (_("Use translations of %1 messages\n"
+ " <i>(requires a restart of %1 to take effect)</i>\n"
+ " <i>(if available for your language preferences)</i>"), PROGRAM_NAME),
+ sigc::ptr_fun (ARDOUR::translations_are_enabled),
+ sigc::ptr_fun (ARDOUR::set_translations_enabled)));
+ }
+
add_option (_("User interaction"), new OptionEditorHeading (_("Keyboard")));
add_option (_("User interaction"), new KeyboardOptions);
- add_option (_("User interaction"), new OptionEditorHeading (_("Control surfaces")));
+ /* Control Surfaces */
- add_option (_("User interaction"), new ControlSurfacesOptions (*this));
+ add_option (_("Control Surfaces"), new ControlSurfacesOptions (*this));
ComboOption<RemoteModel>* rm = new ComboOption<RemoteModel> (
"remote-model",
rm->add (UserOrdered, _("assigned by user"));
rm->add (MixerOrdered, _("follows order of mixer"));
- rm->add (EditorOrdered, _("follows order of editor"));
- add_option (_("User interaction"), rm);
+ add_option (_("Control Surfaces"), rm);
+
+ /* VIDEO Timeline */
+ add_option (_("Video"), new VideoTimelineOptions (_rc_config));
/* INTERFACE */
- add_option (S_("Visual|Interface"),
+ add_option (S_("Preferences|GUI"),
new BoolOption (
"widget-prelight",
_("Graphically indicate mouse pointer hovering over various widgets"),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_widget_prelight)
));
+ add_option (S_("Preferences|GUI"),
+ new BoolOption (
+ "use-tooltips",
+ _("Show tooltips if mouse hovers over a control"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_use_tooltips),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_use_tooltips)
+ ));
+
#ifndef GTKOSX
/* font scaling does nothing with GDK/Quartz */
- add_option (S_("Visual|Interface"), new FontScalingOptions (_rc_config));
+ add_option (S_("Preferences|GUI"), new FontScalingOptions (_rc_config));
#endif
- add_option (S_("Visual|Interface"),
+
+ add_option (S_("GUI"),
new BoolOption (
- "use-own-plugin-gui",
- _("Use plugins' own interface instead of a builtin one"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_use_plugin_own_gui),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_use_plugin_own_gui)
+ "super-rapid-clock-update",
+ _("update transport clock display every 40ms instead of every 100ms"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_super_rapid_clock_update),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_super_rapid_clock_update)
));
/* The names of these controls must be the same as those given in MixerStrip
_mixer_strip_visibility.add (0, X_("SoloSafe"), _("Solo Safe"));
_mixer_strip_visibility.add (0, X_("SoloIsolated"), _("Solo Isolated"));
_mixer_strip_visibility.add (0, X_("Comments"), _("Comments"));
- _mixer_strip_visibility.add (0, X_("Group"), _("Group"));
_mixer_strip_visibility.add (0, X_("MeterPoint"), _("Meter Point"));
add_option (
- S_("Visual|Interface"),
+ S_("Preferences|GUI"),
new VisibilityOption (
_("Mixer Strip"),
&_mixer_strip_visibility,
)
);
- add_option (S_("Visual|Interface"),
+ add_option (S_("Preferences|GUI"),
new BoolOption (
"default-narrow_ms",
- _("Use narrow mixer strips by default"),
+ _("Use narrow strips in the mixer by default"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_default_narrow_ms),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_default_narrow_ms)
));
- add_option (S_("Visual|Interface"), new OptionEditorHeading (_("Metering")));
+ add_option (S_("Preferences|GUI"), new OptionEditorHeading (_("Metering")));
ComboOption<float>* mht = new ComboOption<float> (
"meter-hold",
- _("Meter hold time"),
+ _("Peak hold time"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_hold),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_hold)
);
mht->add (MeterHoldMedium, _("medium"));
mht->add (MeterHoldLong, _("long"));
- add_option (S_("Visual|Interface"), mht);
+ add_option (S_("Preferences|GUI"), mht);
ComboOption<float>* mfo = new ComboOption<float> (
"meter-falloff",
- _("Meter fall-off"),
+ _("DPM fall-off"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_falloff),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_falloff)
);
- mfo->add (METER_FALLOFF_OFF, _("off"));
- mfo->add (METER_FALLOFF_SLOWEST, _("slowest"));
- mfo->add (METER_FALLOFF_SLOW, _("slow"));
- mfo->add (METER_FALLOFF_MEDIUM, _("medium"));
- mfo->add (METER_FALLOFF_FAST, _("fast"));
- mfo->add (METER_FALLOFF_FASTER, _("faster"));
- mfo->add (METER_FALLOFF_FASTEST, _("fastest"));
+ mfo->add (METER_FALLOFF_OFF, _("off"));
+ mfo->add (METER_FALLOFF_SLOWEST, _("slowest [6.6dB/sec]"));
+ mfo->add (METER_FALLOFF_SLOW, _("slow [8.6dB/sec] (BBC PPM, EBU PPM)"));
+ mfo->add (METER_FALLOFF_SLOWISH, _("slowish [12.0dB/sec] (DIN)"));
+ mfo->add (METER_FALLOFF_MODERATE, _("moderate [13.3dB/sec] (EBU Digi PPM, IRT Digi PPM)"));
+ mfo->add (METER_FALLOFF_MEDIUM, _("medium [20dB/sec]"));
+ mfo->add (METER_FALLOFF_FAST, _("fast [32dB/sec]"));
+ mfo->add (METER_FALLOFF_FASTER, _("faster [46dB/sec]"));
+ mfo->add (METER_FALLOFF_FASTEST, _("fastest [70dB/sec]"));
+
+ add_option (S_("Preferences|GUI"), mfo);
+
+ ComboOption<MeterLineUp>* mlu = new ComboOption<MeterLineUp> (
+ "meter-line-up-level",
+ _("Meter line-up level; 0dBu"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_line_up_level),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_line_up_level)
+ );
+
+ mlu->add (MeteringLineUp24, _("-24dBFS (SMPTE US: 4dBu = -20dBFS)"));
+ mlu->add (MeteringLineUp20, _("-20dBFS (SMPTE RP.0155)"));
+ mlu->add (MeteringLineUp18, _("-18dBFS (EBU, BBC)"));
+ mlu->add (MeteringLineUp15, _("-15dBFS (DIN)"));
+
+ Gtkmm2ext::UI::instance()->set_tip (mlu->tip_widget(), _("Configure meter-marks and color-knee point for dBFS scale DPM, set reference level for IEC1/Nordic, IEC2 PPM and VU meter."));
+
+ add_option (S_("Preferences|GUI"), mlu);
+
+ ComboOption<MeterLineUp>* mld = new ComboOption<MeterLineUp> (
+ "meter-line-up-din",
+ _("IEC1/DIN Meter line-up level; 0dBu"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_line_up_din),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_line_up_din)
+ );
+
+ mld->add (MeteringLineUp24, _("-24dBFS (SMPTE US: 4dBu = -20dBFS)"));
+ mld->add (MeteringLineUp20, _("-20dBFS (SMPTE RP.0155)"));
+ mld->add (MeteringLineUp18, _("-18dBFS (EBU, BBC)"));
+ mld->add (MeteringLineUp15, _("-15dBFS (DIN)"));
+
+ Gtkmm2ext::UI::instance()->set_tip (mld->tip_widget(), _("Reference level for IEC1/DIN meter."));
+
+ add_option (S_("Preferences|GUI"), mld);
+
+ ComboOption<VUMeterStandard>* mvu = new ComboOption<VUMeterStandard> (
+ "meter-vu-standard",
+ _("VU Meter standard"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_vu_standard),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_vu_standard)
+ );
+
+ mvu->add (MeteringVUfrench, _("0VU = -2dBu (France)"));
+ mvu->add (MeteringVUamerican, _("0VU = 0dBu (North America, Australia)"));
+ mvu->add (MeteringVUstandard, _("0VU = +4dBu (standard)"));
+ mvu->add (MeteringVUeight, _("0VU = +8dBu"));
+
+ add_option (S_("Preferences|GUI"), mvu);
+
+ Gtk::Adjustment *mpk = manage (new Gtk::Adjustment(0, -10, 0, .1, .1));
+ HSliderOption *mpks = new HSliderOption("meter-peak",
+ _("Peak threshold [dBFS]"),
+ mpk,
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_peak),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_peak)
+ );
+
+ Gtkmm2ext::UI::instance()->set_tip
+ (mpks->tip_widget(),
+ _("Specify the audio signal level in dbFS at and above which the meter-peak indicator will flash red."));
+
+ add_option (S_("Preferences|GUI"), mpks);
+
+ add_option (S_("Preferences|GUI"),
+ new BoolOption (
+ "meter-style-led",
+ _("LED meter style"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_style_led),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_style_led)
+ ));
- add_option (S_("Visual|Interface"), mfo);
}
void
}
_solo_control_is_listen_control->set_sensitive (s);
_listen_position->set_sensitive (s);
+ } else if (p == "sync-source") {
+ _sync_source->set_sensitive (true);
+ if (_session) {
+ _sync_source->set_sensitive (!_session->config.get_external_sync());
+ }
+ switch(Config->get_sync_source()) {
+ case ARDOUR::MTC:
+ case ARDOUR::LTC:
+ _sync_genlock->set_sensitive (true);
+ _sync_framerate->set_sensitive (true);
+ _sync_source_2997->set_sensitive (true);
+ break;
+ default:
+ _sync_genlock->set_sensitive (false);
+ _sync_framerate->set_sensitive (false);
+ _sync_source_2997->set_sensitive (false);
+ break;
+ }
+ } else if (p == "send-ltc") {
+ bool const s = Config->get_send_ltc ();
+ _ltc_send_continuously->set_sensitive (s);
+ _ltc_volume_slider->set_sensitive (s);
+ }
+}
+
+void RCOptionEditor::ltc_generator_volume_changed () {
+ _rc_config->set_ltc_output_volume (pow(10, _ltc_volume_adjustment->get_value() / 20));
+}
+
+void
+RCOptionEditor::populate_sync_options ()
+{
+ vector<SyncSource> sync_opts = ARDOUR::get_available_sync_options ();
+
+ _sync_source->clear ();
+
+ for (vector<SyncSource>::iterator i = sync_opts.begin(); i != sync_opts.end(); ++i) {
+ _sync_source->add (*i, sync_source_to_string (*i));
}
}