*/
-#include "pbd/i18n.h"
+#include "pbd/enumwriter.h"
+#include "pbd/memento_command.h"
+#include "ardour/audioengine.h"
+#include "ardour/audioplaylist.h"
+#include "ardour/audio_buffer.h"
+#include "ardour/butler.h"
#include "ardour/debug.h"
#include "ardour/disk_reader.h"
+#include "ardour/midi_ring_buffer.h"
+#include "ardour/midi_playlist.h"
+#include "ardour/midi_track.h"
+#include "ardour/pannable.h"
#include "ardour/playlist.h"
+#include "ardour/playlist_factory.h"
#include "ardour/session.h"
+#include "ardour/session_playlists.h"
+
+#include "pbd/i18n.h"
using namespace ARDOUR;
using namespace PBD;
using namespace std;
-ARDOUR::framecnt_t DiskReader::_chunk_frames = default_chunk_frames ();
+ARDOUR::samplecnt_t DiskReader::_chunk_samples = default_chunk_samples ();
+PBD::Signal0<void> DiskReader::Underrun;
+Sample* DiskReader::_mixdown_buffer = 0;
+gain_t* DiskReader::_gain_buffer = 0;
+samplecnt_t DiskReader::midi_readahead = 4096;
+bool DiskReader::_no_disk_output = false;
DiskReader::DiskReader (Session& s, string const & str, DiskIOProcessor::Flag f)
: DiskIOProcessor (s, str, f)
- , _roll_delay (0)
- , overwrite_frame (0)
- , overwrite_offset (0)
- , _pending_overwrite (false)
- , overwrite_queued (false)
- , file_frame (0)
- , playback_sample (0)
+ , overwrite_sample (0)
+ , overwrite_offset (0)
+ , _pending_overwrite (false)
+ , overwrite_queued (false)
+ , _gui_feed_buffer (AudioEngine::instance()->raw_buffer_size (DataType::MIDI))
{
+ file_sample[DataType::AUDIO] = 0;
+ file_sample[DataType::MIDI] = 0;
}
DiskReader::~DiskReader ()
{
- DEBUG_TRACE (DEBUG::Destruction, string_compose ("DiskReader %1 deleted\n", _name));
+ DEBUG_TRACE (DEBUG::Destruction, string_compose ("DiskReader %1 @ %2 deleted\n", _name, this));
+
+ for (uint32_t n = 0; n < DataType::num_types; ++n) {
+ if (_playlists[n]) {
+ _playlists[n]->release ();
+ }
+ }
+
+ {
+ RCUWriter<ChannelList> writer (channels);
+ boost::shared_ptr<ChannelList> c = writer.get_copy();
- if (_playlist) {
- _playlist->release ();
+ for (ChannelList::iterator chan = c->begin(); chan != c->end(); ++chan) {
+ delete *chan;
+ }
+
+ c->clear();
}
+
+ channels.flush ();
+
+ delete _midi_buf;
+}
+
+void
+DiskReader::allocate_working_buffers()
+{
+ /* with varifill buffer refilling, we compute the read size in bytes (to optimize
+ for disk i/o bandwidth) and then convert back into samples. These buffers
+ need to reflect the maximum size we could use, which is 4MB reads, or 2M samples
+ using 16 bit samples.
+ */
+ _mixdown_buffer = new Sample[2*1048576];
+ _gain_buffer = new gain_t[2*1048576];
+}
+
+void
+DiskReader::free_working_buffers()
+{
+ delete [] _mixdown_buffer;
+ delete [] _gain_buffer;
+ _mixdown_buffer = 0;
+ _gain_buffer = 0;
}
-framecnt_t
-DiskReader::default_chunk_frames()
+samplecnt_t
+DiskReader::default_chunk_samples()
{
return 65536;
}
bool
DiskReader::set_name (string const & str)
{
- if (_name != str) {
- assert (_playlist);
- _playlist->set_name (str);
- SessionObject::set_name(str);
+ string my_name = X_("player:");
+ my_name += str;
+
+ if (_name != my_name) {
+ SessionObject::set_name (my_name);
}
return true;
}
+XMLNode&
+DiskReader::state (bool full)
+{
+ XMLNode& node (DiskIOProcessor::state (full));
+ node.set_property(X_("type"), X_("diskreader"));
+ return node;
+}
+
+int
+DiskReader::set_state (const XMLNode& node, int version)
+{
+ if (DiskIOProcessor::set_state (node, version)) {
+ return -1;
+ }
+
+ return 0;
+}
+
+void
+DiskReader::realtime_handle_transport_stopped ()
+{
+ realtime_speed_change ();
+}
+
+void
+DiskReader::realtime_locate ()
+{
+}
+
+float
+DiskReader::buffer_load () const
+{
+ /* Note: for MIDI it's not trivial to differentiate the following two cases:
+
+ 1. The playback buffer is empty because the system has run out of time to fill it.
+ 2. The playback buffer is empty because there is no more data on the playlist.
+
+ If we use a simple buffer load computation, we will report that the MIDI diskstream
+ cannot keep up when #2 happens, when in fact it can. Since MIDI data rates
+ are so low compared to audio, just use the audio value here.
+ */
+
+ boost::shared_ptr<ChannelList> c = channels.reader();
+
+ if (c->empty ()) {
+ /* no channels, so no buffers, so completely full and ready to playback, sir! */
+ return 1.0;
+ }
+
+ PBD::RingBufferNPT<Sample> * b = c->front()->buf;
+ return (float) ((double) b->read_space() / (double) b->bufsize());
+}
+
+void
+DiskReader::adjust_buffering ()
+{
+ boost::shared_ptr<ChannelList> c = channels.reader();
+
+ for (ChannelList::iterator chan = c->begin(); chan != c->end(); ++chan) {
+ (*chan)->resize (_session.butler()->audio_diskstream_playback_buffer_size());
+ }
+}
+
void
DiskReader::playlist_changed (const PropertyChange&)
{
DiskReader::playlist_modified ()
{
if (!i_am_the_modifier && !overwrite_queued) {
- // !!!! _session.request_overwrite_buffer (this);
+ _session.request_overwrite_buffer (_route);
+ overwrite_queued = true;
+ }
+}
+
+int
+DiskReader::use_playlist (DataType dt, boost::shared_ptr<Playlist> playlist)
+{
+ bool prior_playlist = false;
+
+ if (_playlists[dt]) {
+ prior_playlist = true;
+ }
+
+ if (DiskIOProcessor::use_playlist (dt, playlist)) {
+ return -1;
+ }
+
+ /* don't do this if we've already asked for it *or* if we are setting up
+ the diskstream for the very first time - the input changed handling will
+ take care of the buffer refill.
+ */
+
+ if (!overwrite_queued && (prior_playlist || _session.loading())) {
+ _session.request_overwrite_buffer (_route);
overwrite_queued = true;
}
+
+ return 0;
}
void
-DiskReader::playlist_deleted (boost::weak_ptr<Playlist> wpl)
+DiskReader::run (BufferSet& bufs, samplepos_t start_sample, samplepos_t end_sample,
+ double speed, pframes_t nframes, bool result_required)
{
- boost::shared_ptr<Playlist> pl (wpl.lock());
+ uint32_t n;
+ boost::shared_ptr<ChannelList> c = channels.reader();
+ ChannelList::iterator chan;
+ sampleoffset_t disk_samples_to_consume;
+ MonitorState ms = _route->monitoring_state ();
+
+ if (_active) {
+ if (!_pending_active) {
+ _active = false;
+ return;
+ }
+ } else {
+ if (_pending_active) {
+ _active = true;
+ } else {
+ return;
+ }
+ }
- if (pl == _playlist) {
+ if (speed == 0.0) {
+ /* stopped. Don't accidentally pass any data from disk
+ * into our outputs (e.g. via interpolation)
+ * nor jump ahead playback_sample when not rolling
+ */
+ if (ms == MonitoringDisk) {
+ /* when monitoring disk, clear input data so far,
+ * everything before the disk processor is not relevant.
+ */
+ bufs.silence (nframes, 0);
+ }
+ return;
+ }
- /* this catches an ordering issue with session destruction. playlists
- are destroyed before disk readers. we have to invalidate any handles
- we have to the playlist.
- */
+ if (speed != 1.0f && speed != -1.0f) {
+ interpolation.set_speed (speed);
+ midi_interpolation.set_speed (speed);
+ disk_samples_to_consume = midi_interpolation.distance (nframes);
+ if (speed < 0.0) {
+ disk_samples_to_consume = -disk_samples_to_consume;
+ }
+ } else {
+ disk_samples_to_consume = nframes;
+ }
+
+ BufferSet& scratch_bufs (_session.get_scratch_buffers (bufs.count()));
+ const bool still_locating = _session.global_locate_pending();
+
+ if (!result_required || ((ms & MonitoringDisk) == 0) || still_locating || _no_disk_output) {
+
+ /* no need for actual disk data, just advance read pointer and return */
+
+ if (!still_locating || _no_disk_output) {
+ for (ChannelList::iterator chan = c->begin(); chan != c->end(); ++chan) {
+ (*chan)->buf->increment_read_ptr (disk_samples_to_consume);
+ }
+ }
+
+ /* if monitoring disk but locating put silence in the buffers */
+
+ if ((_no_disk_output || still_locating) && (ms == MonitoringDisk)) {
+ bufs.silence (nframes, 0);
+ }
+
+ } else {
+
+ /* we need audio data from disk */
+
+ size_t n_buffers = bufs.count().n_audio();
+ size_t n_chans = c->size();
+ gain_t scaling;
+
+ if (n_chans > n_buffers) {
+ scaling = ((float) n_buffers)/n_chans;
+ } else {
+ scaling = 1.0;
+ }
+
+ for (n = 0, chan = c->begin(); chan != c->end(); ++chan, ++n) {
+
+ ChannelInfo* chaninfo (*chan);
+ AudioBuffer& output (bufs.get_audio (n%n_buffers));
+ Sample* disk_signal = 0; /* assignment not really needed but it keeps the compiler quiet and helps track bugs */
+
+ if (ms & MonitoringInput) {
+ /* put disk stream in scratch buffer, blend at end */
+ disk_signal = scratch_bufs.get_audio(n).data ();
+ } else {
+ /* no input stream needed, just overwrite buffers */
+ disk_signal = output.data ();
+ }
+
+ if (start_sample < playback_sample) {
+ cerr << owner()->name() << " SS = " << start_sample << " PS = " << playback_sample << endl;
+ abort ();
+ }
+
+ if (start_sample != playback_sample) {
+ cerr << owner()->name() << " playback not aligned, jump ahead " << (start_sample - playback_sample) << endl;
+
+ if (can_internal_playback_seek (start_sample - playback_sample)) {
+ internal_playback_seek (start_sample - playback_sample);
+ } else {
+ cerr << owner()->name() << " playback not possible: ss = " << start_sample << " ps = " << playback_sample << endl;
+ goto midi;
+ }
+ }
+
+ chaninfo->buf->get_read_vector (&(*chan)->rw_vector);
+
+ if (disk_samples_to_consume <= (samplecnt_t) chaninfo->rw_vector.len[0]) {
+
+ if (fabsf (speed) != 1.0f) {
+ (void) interpolation.interpolate (
+ n, disk_samples_to_consume,
+ chaninfo->rw_vector.buf[0],
+ disk_signal);
+ } else if (speed != 0.0) {
+ memcpy (disk_signal, chaninfo->rw_vector.buf[0], sizeof (Sample) * disk_samples_to_consume);
+ }
+
+ } else {
+
+ const samplecnt_t total = chaninfo->rw_vector.len[0] + chaninfo->rw_vector.len[1];
+
+ if (disk_samples_to_consume <= total) {
+
+ /* We have enough samples, but not in one lump.
+ */
+
+ if (fabsf (speed) != 1.0f) {
+ interpolation.interpolate (n, chaninfo->rw_vector.len[0],
+ chaninfo->rw_vector.buf[0],
+ disk_signal);
+ disk_signal += chaninfo->rw_vector.len[0];
+ interpolation.interpolate (n, disk_samples_to_consume - chaninfo->rw_vector.len[0],
+ chaninfo->rw_vector.buf[1],
+ disk_signal);
+ } else if (speed != 0.0) {
+ memcpy (disk_signal,
+ chaninfo->rw_vector.buf[0],
+ chaninfo->rw_vector.len[0] * sizeof (Sample));
+ memcpy (disk_signal + chaninfo->rw_vector.len[0],
+ chaninfo->rw_vector.buf[1],
+ (disk_samples_to_consume - chaninfo->rw_vector.len[0]) * sizeof (Sample));
+ }
+
+ } else {
+
+ cerr << _name << " Need " << disk_samples_to_consume << " total = " << total << endl;
+ cerr << "underrun for " << _name << endl;
+ DEBUG_TRACE (DEBUG::Butler, string_compose ("%1 underrun in %2, total space = %3\n",
+ DEBUG_THREAD_SELF, name(), total));
+ Underrun ();
+ return;
+
+ }
+ }
+
+ if (scaling != 1.0f && speed != 0.0) {
+ apply_gain_to_buffer (disk_signal, disk_samples_to_consume, scaling);
+ }
+
+ chaninfo->buf->increment_read_ptr (disk_samples_to_consume);
+
+ monitor_mix:
+
+ if (ms & MonitoringInput) {
+ /* mix the disk signal into the input signal (already in bufs) */
+ mix_buffers_no_gain (output.data(), disk_signal, disk_samples_to_consume);
+ }
+ }
+ }
+
+ /* MIDI data handling */
+
+ midi:
+ if (!_session.declick_out_pending() && bufs.count().n_midi()) {
+ MidiBuffer* dst;
+
+ if (_no_disk_output) {
+ dst = &scratch_bufs.get_midi(0);
+ } else {
+ dst = &bufs.get_midi (0);
+ }
- if (_playlist) {
- _playlist.reset ();
+ if ((ms & MonitoringDisk) && !still_locating) {
+ get_midi_playback (*dst, disk_samples_to_consume, ms, scratch_bufs, speed, disk_samples_to_consume);
}
}
+
+ if (!still_locating) {
+
+ bool butler_required = false;
+
+ if (speed < 0.0) {
+ playback_sample -= disk_samples_to_consume;
+ } else {
+ playback_sample += disk_samples_to_consume;
+ }
+
+ if (_playlists[DataType::AUDIO]) {
+ if (!c->empty()) {
+ if (_slaved) {
+ if (c->front()->buf->write_space() >= c->front()->buf->bufsize() / 2) {
+ DEBUG_TRACE (DEBUG::Butler, string_compose ("%1: slaved, write space = %2 of %3\n", name(), c->front()->buf->write_space(),
+ c->front()->buf->bufsize()));
+ butler_required = true;
+ }
+ } else {
+ if ((samplecnt_t) c->front()->buf->write_space() >= _chunk_samples) {
+ DEBUG_TRACE (DEBUG::Butler, string_compose ("%1: write space = %2 of %3\n", name(), c->front()->buf->write_space(),
+ _chunk_samples));
+ butler_required = true;
+ }
+ }
+ }
+ }
+
+ if (_playlists[DataType::MIDI]) {
+ /* MIDI butler needed part */
+
+ uint32_t samples_read = g_atomic_int_get(const_cast<gint*>(&_samples_read_from_ringbuffer));
+ uint32_t samples_written = g_atomic_int_get(const_cast<gint*>(&_samples_written_to_ringbuffer));
+
+ /*
+ cerr << name() << " MDS written: " << samples_written << " - read: " << samples_read <<
+ " = " << samples_written - samples_read
+ << " + " << disk_samples_to_consume << " < " << midi_readahead << " = " << need_butler << ")" << endl;
+ */
+
+ /* samples_read will generally be less than samples_written, but
+ * immediately after an overwrite, we can end up having read some data
+ * before we've written any. we don't need to trip an assert() on this,
+ * but we do need to check so that the decision on whether or not we
+ * need the butler is done correctly.
+ */
+
+ /* furthermore..
+ *
+ * Doing heavy GUI operations[1] can stall also the butler.
+ * The RT-thread meanwhile will happily continue and
+ * ‘samples_read’ (from buffer to output) will become larger
+ * than ‘samples_written’ (from disk to buffer).
+ *
+ * The disk-stream is now behind..
+ *
+ * In those cases the butler needs to be summed to refill the buffer (done now)
+ * AND we need to skip (samples_read - samples_written). ie remove old events
+ * before playback_sample from the rinbuffer.
+ *
+ * [1] one way to do so is described at #6170.
+ * For me just popping up the context-menu on a MIDI-track header
+ * of a track with a large (think beethoven :) midi-region also did the
+ * trick. The playhead stalls for 2 or 3 sec, until the context-menu shows.
+ *
+ * In both cases the root cause is that redrawing MIDI regions on the GUI is still very slow
+ * and can stall
+ */
+ if (samples_read <= samples_written) {
+ if ((samples_written - samples_read) + disk_samples_to_consume < midi_readahead) {
+ butler_required = true;
+ }
+ } else {
+ butler_required = true;
+ }
+
+ }
+
+ _need_butler = butler_required;
+ }
+
+ // DEBUG_TRACE (DEBUG::Butler, string_compose ("%1 reader run, needs butler = %2\n", name(), _need_butler));
+}
+
+void
+DiskReader::set_pending_overwrite (bool yn)
+{
+ /* called from audio thread, so we can use the read ptr and playback sample as we wish */
+
+ _pending_overwrite = yn;
+
+ overwrite_sample = playback_sample;
+
+ boost::shared_ptr<ChannelList> c = channels.reader ();
+ if (!c->empty ()) {
+ overwrite_offset = c->front()->buf->get_read_ptr();
+ }
}
int
-DiskReader::use_playlist (boost::shared_ptr<Playlist> playlist)
+DiskReader::overwrite_existing_buffers ()
{
- if (!playlist) {
- return 0;
- }
+ int ret = -1;
- bool prior_playlist = false;
+ boost::shared_ptr<ChannelList> c = channels.reader();
- {
- Glib::Threads::Mutex::Lock lm (state_lock);
+ overwrite_queued = false;
- if (playlist == _playlist) {
- return 0;
- }
+ DEBUG_TRACE (DEBUG::DiskIO, string_compose ("%1 overwriting existing buffers at %2\n", overwrite_sample));
+
+ if (!c->empty ()) {
+
+ /* AUDIO */
+
+ const bool reversed = _session.transport_speed() < 0.0f;
- playlist_connections.drop_connections ();
+ /* assume all are the same size */
+ samplecnt_t size = c->front()->buf->bufsize();
- if (_playlist) {
- _playlist->release();
- prior_playlist = true;
+ std::auto_ptr<Sample> mixdown_buffer (new Sample[size]);
+ std::auto_ptr<float> gain_buffer (new float[size]);
+
+ /* reduce size so that we can fill the buffer correctly (ringbuffers
+ can only handle size-1, otherwise they appear to be empty)
+ */
+ size--;
+
+ uint32_t n=0;
+ samplepos_t start;
+
+ for (ChannelList::iterator chan = c->begin(); chan != c->end(); ++chan, ++n) {
+
+ start = overwrite_sample;
+ samplecnt_t cnt = size;
+
+ /* to fill the buffer without resetting the playback sample, we need to
+ do it one or two chunks (normally two).
+
+ |----------------------------------------------------------------------|
+
+ ^
+ overwrite_offset
+ |<- second chunk->||<----------------- first chunk ------------------>|
+
+ */
+
+ samplecnt_t to_read = size - overwrite_offset;
+
+ if (audio_read ((*chan)->buf->buffer() + overwrite_offset, mixdown_buffer.get(), gain_buffer.get(), start, to_read, n, reversed)) {
+ error << string_compose(_("DiskReader %1: when refilling, cannot read %2 from playlist at sample %3"),
+ id(), size, playback_sample) << endmsg;
+ goto midi;
+ }
+
+ if (cnt > to_read) {
+
+ cnt -= to_read;
+
+ if (audio_read ((*chan)->buf->buffer(), mixdown_buffer.get(), gain_buffer.get(), start, cnt, n, reversed)) {
+ error << string_compose(_("DiskReader %1: when refilling, cannot read %2 from playlist at sample %3"),
+ id(), size, playback_sample) << endmsg;
+ goto midi;
+ }
+ }
}
- _playlist = playlist;
- _playlist->use();
+ ret = 0;
- _playlist->ContentsChanged.connect_same_thread (playlist_connections, boost::bind (&DiskReader::playlist_modified, this));
- _playlist->LayeringChanged.connect_same_thread (playlist_connections, boost::bind (&DiskReader::playlist_modified, this));
- _playlist->DropReferences.connect_same_thread (playlist_connections, boost::bind (&DiskReader::playlist_deleted, this, boost::weak_ptr<Playlist>(_playlist)));
- _playlist->RangesMoved.connect_same_thread (playlist_connections, boost::bind (&DiskReader::playlist_ranges_moved, this, _1, _2));
}
- /* don't do this if we've already asked for it *or* if we are setting up
- the diskstream for the very first time - the input changed handling will
- take care of the buffer refill.
- */
+ midi:
- if (!overwrite_queued && prior_playlist) {
- // !!! _session.request_overwrite_buffer (this);
- overwrite_queued = true;
+ if (_midi_buf && _playlists[DataType::MIDI]) {
+
+ /* Clear the playback buffer contents. This is safe as long as the butler
+ thread is suspended, which it should be.
+ */
+ _midi_buf->reset ();
+ _midi_buf->reset_tracker ();
+
+ g_atomic_int_set (&_samples_read_from_ringbuffer, 0);
+ g_atomic_int_set (&_samples_written_to_ringbuffer, 0);
+
+ /* Resolve all currently active notes in the playlist. This is more
+ aggressive than it needs to be: ideally we would only resolve what is
+ absolutely necessary, but this seems difficult and/or impossible without
+ having the old data or knowing what change caused the overwrite.
+ */
+ midi_playlist()->resolve_note_trackers (*_midi_buf, overwrite_sample);
+
+ midi_read (overwrite_sample, _chunk_samples, false);
+ file_sample[DataType::MIDI] = overwrite_sample; // overwrite_sample was adjusted by ::midi_read() to the new position
+ }
+
+ _pending_overwrite = false;
+
+ return ret;
+}
+
+int
+DiskReader::seek (samplepos_t sample, bool complete_refill)
+{
+ uint32_t n;
+ int ret = -1;
+ ChannelList::iterator chan;
+ boost::shared_ptr<ChannelList> c = channels.reader();
+
+ //sample = std::max ((samplecnt_t)0, sample -_session.worst_output_latency ());
+
+ for (n = 0, chan = c->begin(); chan != c->end(); ++chan, ++n) {
+ (*chan)->buf->reset ();
+ }
+
+ if (g_atomic_int_get (&_samples_read_from_ringbuffer) == 0) {
+ /* we haven't read anything since the last seek,
+ so flush all note trackers to prevent
+ wierdness
+ */
+ reset_tracker ();
+ }
+
+ _midi_buf->reset();
+ g_atomic_int_set(&_samples_read_from_ringbuffer, 0);
+ g_atomic_int_set(&_samples_written_to_ringbuffer, 0);
+
+ playback_sample = sample;
+ file_sample[DataType::AUDIO] = sample;
+ file_sample[DataType::MIDI] = sample;
+
+ if (complete_refill) {
+ /* call _do_refill() to refill the entire buffer, using
+ the largest reads possible.
+ */
+ while ((ret = do_refill_with_alloc (false)) > 0) ;
+ } else {
+ /* call _do_refill() to refill just one chunk, and then
+ return.
+ */
+ ret = do_refill_with_alloc (true);
+ }
+
+
+ return ret;
+}
+
+int
+DiskReader::can_internal_playback_seek (samplecnt_t distance)
+{
+ /* 1. Audio */
+
+ ChannelList::iterator chan;
+ boost::shared_ptr<ChannelList> c = channels.reader();
+
+ for (chan = c->begin(); chan != c->end(); ++chan) {
+ if ((*chan)->buf->read_space() < (size_t) distance) {
+ return false;
+ }
+ }
+
+ /* 2. MIDI */
+
+ uint32_t samples_read = g_atomic_int_get(&_samples_read_from_ringbuffer);
+ uint32_t samples_written = g_atomic_int_get(&_samples_written_to_ringbuffer);
+
+ return ((samples_written - samples_read) < distance);
+}
+
+int
+DiskReader::internal_playback_seek (samplecnt_t distance)
+{
+ ChannelList::iterator chan;
+ boost::shared_ptr<ChannelList> c = channels.reader();
+
+ for (chan = c->begin(); chan != c->end(); ++chan) {
+ (*chan)->buf->increment_read_ptr (::llabs(distance));
}
- PlaylistChanged (); /* EMIT SIGNAL */
- _session.set_dirty ();
+ playback_sample += distance;
return 0;
}
-void
-DiskReader::set_roll_delay (ARDOUR::framecnt_t nframes)
+static
+void swap_by_ptr (Sample *first, Sample *last)
{
- _roll_delay = nframes;
+ while (first < last) {
+ Sample tmp = *first;
+ *first++ = *last;
+ *last-- = tmp;
+ }
}
+/** Read some data for 1 channel from our playlist into a buffer.
+ * @param buf Buffer to write to.
+ * @param start Session sample to start reading from; updated to where we end up
+ * after the read.
+ * @param cnt Count of samples to read.
+ * @param reversed true if we are running backwards, otherwise false.
+ */
int
-DiskReader::set_state (const XMLNode& node, int version)
+DiskReader::audio_read (Sample* buf, Sample* mixdown_buffer, float* gain_buffer,
+ samplepos_t& start, samplecnt_t cnt,
+ int channel, bool reversed)
{
- XMLProperty const * prop;
+ samplecnt_t this_read = 0;
+ bool reloop = false;
+ samplepos_t loop_end = 0;
+ samplepos_t loop_start = 0;
+ samplecnt_t offset = 0;
+ Location *loc = 0;
- if (DiskIOProcessor::set_state (node, version)) {
- return -1;
+ if (!_playlists[DataType::AUDIO]) {
+ memset (buf, 0, sizeof (Sample) * cnt);
+ return 0;
}
- if ((prop = node.property ("playlist")) == 0) {
- return -1;
+ /* XXX we don't currently play loops in reverse. not sure why */
+
+ if (!reversed) {
+
+ samplecnt_t loop_length = 0;
+
+ /* Make the use of a Location atomic for this read operation.
+
+ Note: Locations don't get deleted, so all we care about
+ when I say "atomic" is that we are always pointing to
+ the same one and using a start/length values obtained
+ just once.
+ */
+
+ if ((loc = loop_location) != 0) {
+ loop_start = loc->start();
+ loop_end = loc->end();
+ loop_length = loop_end - loop_start;
+ }
+
+ /* if we are looping, ensure that the first sample we read is at the correct
+ position within the loop.
+ */
+
+ if (loc && start >= loop_end) {
+ start = loop_start + ((start - loop_start) % loop_length);
+ }
+
}
- if (find_and_use_playlist (prop->value())) {
- return -1;
+ if (reversed) {
+ start -= cnt;
}
- return 0;
+ /* We need this while loop in case we hit a loop boundary, in which case our read from
+ the playlist must be split into more than one section.
+ */
+
+ while (cnt) {
+
+ /* take any loop into account. we can't read past the end of the loop. */
+
+ if (loc && (loop_end - start < cnt)) {
+ this_read = loop_end - start;
+ reloop = true;
+ } else {
+ reloop = false;
+ this_read = cnt;
+ }
+
+ if (this_read == 0) {
+ break;
+ }
+
+ this_read = min(cnt,this_read);
+
+ if (audio_playlist()->read (buf+offset, mixdown_buffer, gain_buffer, start, this_read, channel) != this_read) {
+ error << string_compose(_("DiskReader %1: cannot read %2 from playlist at sample %3"), id(), this_read,
+ start) << endmsg;
+ return -1;
+ }
+
+ if (reversed) {
+
+ swap_by_ptr (buf, buf + this_read - 1);
+
+ } else {
+
+ /* if we read to the end of the loop, go back to the beginning */
+
+ if (reloop) {
+ start = loop_start;
+ } else {
+ start += this_read;
+ }
+ }
+
+ cnt -= this_read;
+ offset += this_read;
+ }
+
+ return 0;
+}
+
+int
+DiskReader::_do_refill_with_alloc (bool partial_fill)
+{
+ /* We limit disk reads to at most 4MB chunks, which with floating point
+ samples would be 1M samples. But we might use 16 or 14 bit samples,
+ in which case 4MB is more samples than that. Therefore size this for
+ the smallest sample value .. 4MB = 2M samples (16 bit).
+ */
+
+ {
+ std::auto_ptr<Sample> mix_buf (new Sample[2*1048576]);
+ std::auto_ptr<float> gain_buf (new float[2*1048576]);
+
+ int ret = refill_audio (mix_buf.get(), gain_buf.get(), (partial_fill ? _chunk_samples : 0));
+
+ if (ret) {
+ return ret;
+ }
+ }
+
+ return refill_midi ();
+}
+
+int
+DiskReader::refill (Sample* mixdown_buffer, float* gain_buffer, samplecnt_t fill_level)
+{
+ int ret = refill_audio (mixdown_buffer, gain_buffer, fill_level);
+
+ if (ret) {
+ return ret;
+ }
+
+ return refill_midi ();
+}
+
+
+/** Get some more data from disk and put it in our channels' bufs,
+ * if there is suitable space in them.
+ *
+ * If fill_level is non-zero, then we will refill the buffer so that there is
+ * still at least fill_level samples of space left to be filled. This is used
+ * after locates so that we do not need to wait to fill the entire buffer.
+ *
+ */
+
+int
+DiskReader::refill_audio (Sample* mixdown_buffer, float* gain_buffer, samplecnt_t fill_level)
+{
+ /* do not read from disk while session is marked as Loading, to avoid
+ useless redundant I/O.
+ */
+
+ if (_session.loading()) {
+ return 0;
+ }
+
+ int32_t ret = 0;
+ samplecnt_t to_read;
+ RingBufferNPT<Sample>::rw_vector vector;
+ bool const reversed = _session.transport_speed() < 0.0f;
+ samplecnt_t total_space;
+ samplecnt_t zero_fill;
+ uint32_t chan_n;
+ ChannelList::iterator i;
+ boost::shared_ptr<ChannelList> c = channels.reader();
+ samplecnt_t ts;
+
+ if (c->empty()) {
+ return 0;
+ }
+
+ assert(mixdown_buffer);
+ assert(gain_buffer);
+
+ vector.buf[0] = 0;
+ vector.len[0] = 0;
+ vector.buf[1] = 0;
+ vector.len[1] = 0;
+
+ c->front()->buf->get_write_vector (&vector);
+
+ if ((total_space = vector.len[0] + vector.len[1]) == 0) {
+ DEBUG_TRACE (DEBUG::DiskIO, string_compose ("%1: no space to refill\n", name()));
+ /* nowhere to write to */
+ return 0;
+ }
+
+ if (fill_level) {
+ if (fill_level < total_space) {
+ total_space -= fill_level;
+ } else {
+ /* we can't do anything with it */
+ fill_level = 0;
+ }
+ }
+
+ /* if we're running close to normal speed and there isn't enough
+ space to do disk_read_chunk_samples of I/O, then don't bother.
+
+ at higher speeds, just do it because the sync between butler
+ and audio thread may not be good enough.
+
+ Note: it is a design assumption that disk_read_chunk_samples is smaller
+ than the playback buffer size, so this check should never trip when
+ the playback buffer is empty.
+ */
+
+ DEBUG_TRACE (DEBUG::DiskIO, string_compose ("%1: space to refill %2 vs. chunk %3 (speed = %4)\n", name(), total_space, _chunk_samples, _session.transport_speed()));
+ if ((total_space < _chunk_samples) && fabs (_session.transport_speed()) < 2.0f) {
+ return 0;
+ }
+
+ /* when slaved, don't try to get too close to the read pointer. this
+ leaves space for the buffer reversal to have something useful to
+ work with.
+ */
+
+ if (_slaved && total_space < (samplecnt_t) (c->front()->buf->bufsize() / 2)) {
+ DEBUG_TRACE (DEBUG::DiskIO, string_compose ("%1: not enough to refill while slaved\n", this));
+ return 0;
+ }
+
+ samplepos_t ffa = file_sample[DataType::AUDIO];
+
+ if (reversed) {
+
+ if (ffa == 0) {
+
+ /* at start: nothing to do but fill with silence */
+
+ for (chan_n = 0, i = c->begin(); i != c->end(); ++i, ++chan_n) {
+
+ ChannelInfo* chan (*i);
+ chan->buf->get_write_vector (&vector);
+ memset (vector.buf[0], 0, sizeof(Sample) * vector.len[0]);
+ if (vector.len[1]) {
+ memset (vector.buf[1], 0, sizeof(Sample) * vector.len[1]);
+ }
+ chan->buf->increment_write_ptr (vector.len[0] + vector.len[1]);
+ }
+ return 0;
+ }
+
+ if (ffa < total_space) {
+
+ /* too close to the start: read what we can,
+ and then zero fill the rest
+ */
+
+ zero_fill = total_space - ffa;
+ total_space = ffa;
+
+ } else {
+
+ zero_fill = 0;
+ }
+
+ } else {
+
+ if (ffa == max_samplepos) {
+
+ /* at end: nothing to do but fill with silence */
+
+ for (chan_n = 0, i = c->begin(); i != c->end(); ++i, ++chan_n) {
+
+ ChannelInfo* chan (*i);
+ chan->buf->get_write_vector (&vector);
+ memset (vector.buf[0], 0, sizeof(Sample) * vector.len[0]);
+ if (vector.len[1]) {
+ memset (vector.buf[1], 0, sizeof(Sample) * vector.len[1]);
+ }
+ chan->buf->increment_write_ptr (vector.len[0] + vector.len[1]);
+ }
+ return 0;
+ }
+
+ if (ffa > max_samplepos - total_space) {
+
+ /* to close to the end: read what we can, and zero fill the rest */
+
+ zero_fill = total_space - (max_samplepos - ffa);
+ total_space = max_samplepos - ffa;
+
+ } else {
+ zero_fill = 0;
+ }
+ }
+
+ samplepos_t file_sample_tmp = 0;
+
+ /* total_space is in samples. We want to optimize read sizes in various sizes using bytes */
+
+ const size_t bits_per_sample = format_data_width (_session.config.get_native_file_data_format());
+ size_t total_bytes = total_space * bits_per_sample / 8;
+
+ /* chunk size range is 256kB to 4MB. Bigger is faster in terms of MB/sec, but bigger chunk size always takes longer
+ */
+ size_t byte_size_for_read = max ((size_t) (256 * 1024), min ((size_t) (4 * 1048576), total_bytes));
+
+ /* find nearest (lower) multiple of 16384 */
+
+ byte_size_for_read = (byte_size_for_read / 16384) * 16384;
+
+ /* now back to samples */
+
+ samplecnt_t samples_to_read = byte_size_for_read / (bits_per_sample / 8);
+
+ DEBUG_TRACE (DEBUG::DiskIO, string_compose ("%1: will refill %2 channels with %3 samples\n", name(), c->size(), total_space));
+
+ // uint64_t before = g_get_monotonic_time ();
+ // uint64_t elapsed;
+
+ for (chan_n = 0, i = c->begin(); i != c->end(); ++i, ++chan_n) {
+
+ ChannelInfo* chan (*i);
+ Sample* buf1;
+ Sample* buf2;
+ samplecnt_t len1, len2;
+
+ chan->buf->get_write_vector (&vector);
+
+ if ((samplecnt_t) vector.len[0] > samples_to_read) {
+
+ /* we're not going to fill the first chunk, so certainly do not bother with the
+ other part. it won't be connected with the part we do fill, as in:
+
+ .... => writable space
+ ++++ => readable space
+ ^^^^ => 1 x disk_read_chunk_samples that would be filled
+
+ |......|+++++++++++++|...............................|
+ buf1 buf0
+ ^^^^^^^^^^^^^^^
+
+
+ So, just pretend that the buf1 part isn't there.
+
+ */
+
+ vector.buf[1] = 0;
+ vector.len[1] = 0;
+
+ }
+
+ ts = total_space;
+ file_sample_tmp = ffa;
+
+ buf1 = vector.buf[0];
+ len1 = vector.len[0];
+ buf2 = vector.buf[1];
+ len2 = vector.len[1];
+
+ to_read = min (ts, len1);
+ to_read = min (to_read, (samplecnt_t) samples_to_read);
+
+ assert (to_read >= 0);
+
+ if (to_read) {
+
+ if (audio_read (buf1, mixdown_buffer, gain_buffer, file_sample_tmp, to_read, chan_n, reversed)) {
+ ret = -1;
+ goto out;
+ }
+ chan->buf->increment_write_ptr (to_read);
+ ts -= to_read;
+ }
+
+ to_read = min (ts, len2);
+
+ if (to_read) {
+
+ /* we read all of vector.len[0], but it wasn't the
+ entire samples_to_read of data, so read some or
+ all of vector.len[1] as well.
+ */
+
+ if (audio_read (buf2, mixdown_buffer, gain_buffer, file_sample_tmp, to_read, chan_n, reversed)) {
+ ret = -1;
+ goto out;
+ }
+
+ chan->buf->increment_write_ptr (to_read);
+ }
+
+ if (zero_fill) {
+ /* XXX: do something */
+ }
+
+ }
+
+ // elapsed = g_get_monotonic_time () - before;
+ // cerr << '\t' << name() << ": bandwidth = " << (byte_size_for_read / 1048576.0) / (elapsed/1000000.0) << "MB/sec\n";
+
+ file_sample[DataType::AUDIO] = file_sample_tmp;
+ assert (file_sample[DataType::AUDIO] >= 0);
+
+ ret = ((total_space - samples_to_read) > _chunk_samples);
+
+ c->front()->buf->get_write_vector (&vector);
+
+ out:
+ return ret;
+}
+
+void
+DiskReader::playlist_ranges_moved (list< Evoral::RangeMove<samplepos_t> > const & movements_samples, bool from_undo)
+{
+ /* If we're coming from an undo, it will have handled
+ automation undo (it must, since automation-follows-regions
+ can lose automation data). Hence we can do nothing here.
+ */
+
+ if (from_undo) {
+ return;
+ }
+
+ if (!_route || Config->get_automation_follows_regions () == false) {
+ return;
+ }
+
+ list< Evoral::RangeMove<double> > movements;
+
+ for (list< Evoral::RangeMove<samplepos_t> >::const_iterator i = movements_samples.begin();
+ i != movements_samples.end();
+ ++i) {
+
+ movements.push_back(Evoral::RangeMove<double>(i->from, i->length, i->to));
+ }
+
+ /* move panner automation */
+ boost::shared_ptr<Pannable> pannable = _route->pannable();
+ Evoral::ControlSet::Controls& c (pannable->controls());
+
+ for (Evoral::ControlSet::Controls::iterator ci = c.begin(); ci != c.end(); ++ci) {
+ boost::shared_ptr<AutomationControl> ac = boost::dynamic_pointer_cast<AutomationControl>(ci->second);
+ if (!ac) {
+ continue;
+ }
+ boost::shared_ptr<AutomationList> alist = ac->alist();
+ if (!alist->size()) {
+ continue;
+ }
+ XMLNode & before = alist->get_state ();
+ bool const things_moved = alist->move_ranges (movements);
+ if (things_moved) {
+ _session.add_command (new MementoCommand<AutomationList> (
+ *alist.get(), &before, &alist->get_state ()));
+ }
+ }
+ /* move processor automation */
+ _route->foreach_processor (boost::bind (&DiskReader::move_processor_automation, this, _1, movements_samples));
+}
+
+void
+DiskReader::move_processor_automation (boost::weak_ptr<Processor> p, list< Evoral::RangeMove<samplepos_t> > const & movements_samples)
+{
+ boost::shared_ptr<Processor> processor (p.lock ());
+ if (!processor) {
+ return;
+ }
+
+ list< Evoral::RangeMove<double> > movements;
+ for (list< Evoral::RangeMove<samplepos_t> >::const_iterator i = movements_samples.begin(); i != movements_samples.end(); ++i) {
+ movements.push_back(Evoral::RangeMove<double>(i->from, i->length, i->to));
+ }
+
+ set<Evoral::Parameter> const a = processor->what_can_be_automated ();
+
+ for (set<Evoral::Parameter>::const_iterator i = a.begin (); i != a.end (); ++i) {
+ boost::shared_ptr<AutomationList> al = processor->automation_control(*i)->alist();
+ if (!al->size()) {
+ continue;
+ }
+ XMLNode & before = al->get_state ();
+ bool const things_moved = al->move_ranges (movements);
+ if (things_moved) {
+ _session.add_command (
+ new MementoCommand<AutomationList> (
+ *al.get(), &before, &al->get_state ()
+ )
+ );
+ }
+ }
+}
+
+boost::shared_ptr<MidiBuffer>
+DiskReader::get_gui_feed_buffer () const
+{
+ boost::shared_ptr<MidiBuffer> b (new MidiBuffer (AudioEngine::instance()->raw_buffer_size (DataType::MIDI)));
+
+ Glib::Threads::Mutex::Lock lm (_gui_feed_buffer_mutex);
+ b->copy (_gui_feed_buffer);
+ return b;
+}
+
+void
+DiskReader::reset_tracker ()
+{
+ _midi_buf->reset_tracker ();
+
+ boost::shared_ptr<MidiPlaylist> mp (midi_playlist());
+
+ if (mp) {
+ mp->reset_note_trackers ();
+ }
+}
+
+void
+DiskReader::resolve_tracker (Evoral::EventSink<samplepos_t>& buffer, samplepos_t time)
+{
+ _midi_buf->resolve_tracker(buffer, time);
+
+ boost::shared_ptr<MidiPlaylist> mp (midi_playlist());
+
+ if (mp) {
+ mp->reset_note_trackers ();
+ }
+}
+
+/** Writes playback events from playback_sample for nframes to dst, translating time stamps
+ * so that an event at playback_sample has time = 0
+ */
+void
+DiskReader::get_midi_playback (MidiBuffer& dst, samplecnt_t nframes, MonitorState ms, BufferSet& scratch_bufs, double speed, samplecnt_t disk_samples_to_consume)
+{
+ MidiBuffer* target;
+
+ if ((ms & MonitoringInput) == 0) {
+ dst.clear();
+ target = &dst;
+ } else {
+ target = &scratch_bufs.get_midi (0);
+ }
+
+ if (ms & MonitoringDisk) {
+ /* no disk data needed */
+
+ Location* loc = loop_location;
+
+ DEBUG_TRACE (DEBUG::MidiDiskstreamIO, string_compose (
+ "%1 MDS pre-read read %8 offset = %9 @ %4..%5 from %2 write to %3, LOOPED ? %6 .. %7\n", _name,
+ _midi_buf->get_read_ptr(), _midi_buf->get_write_ptr(), playback_sample, playback_sample + nframes,
+ (loc ? loc->start() : -1), (loc ? loc->end() : -1), nframes, Port::port_offset()));
+
+ //cerr << "======== PRE ========\n";
+ //_midi_buf->dump (cerr);
+ //cerr << "----------------\n";
+
+ size_t events_read = 0;
+
+ if (loc) {
+ samplepos_t effective_start;
+
+ Evoral::Range<samplepos_t> loop_range (loc->start(), loc->end() - 1);
+ effective_start = loop_range.squish (playback_sample);
+
+ DEBUG_TRACE (DEBUG::MidiDiskstreamIO, string_compose ("looped, effective start adjusted to %1\n", effective_start));
+
+ if (effective_start == loc->start()) {
+ /* We need to turn off notes that may extend
+ beyond the loop end.
+ */
+
+ _midi_buf->resolve_tracker (*target, 0);
+ }
+
+ /* for split-cycles we need to offset the events */
+
+ if (loc->end() >= effective_start && loc->end() < effective_start + nframes) {
+
+ /* end of loop is within the range we are reading, so
+ split the read in two, and lie about the location
+ for the 2nd read
+ */
+
+ samplecnt_t first, second;
+
+ first = loc->end() - effective_start;
+ second = nframes - first;
+
+ DEBUG_TRACE (DEBUG::MidiDiskstreamIO, string_compose ("loop read for eff %1 end %2: %3 and %4, cycle offset %5\n",
+ effective_start, loc->end(), first, second));
+
+ if (first) {
+ DEBUG_TRACE (DEBUG::MidiDiskstreamIO, string_compose ("loop read #1, from %1 for %2\n",
+ effective_start, first));
+ events_read = _midi_buf->read (*target, effective_start, first);
+ }
+
+ if (second) {
+ DEBUG_TRACE (DEBUG::MidiDiskstreamIO, string_compose ("loop read #2, from %1 for %2\n",
+ loc->start(), second));
+ events_read += _midi_buf->read (*target, loc->start(), second);
+ }
+
+ } else {
+ DEBUG_TRACE (DEBUG::MidiDiskstreamIO, string_compose ("loop read #3, adjusted start as %1 for %2\n",
+ effective_start, nframes));
+ events_read = _midi_buf->read (*target, effective_start, effective_start + nframes);
+ }
+ } else {
+ const size_t n_skipped = _midi_buf->skip_to (playback_sample);
+ if (n_skipped > 0) {
+ warning << string_compose(_("MidiDiskstream %1: skipped %2 events, possible underflow"), id(), n_skipped) << endmsg;
+ }
+ DEBUG_TRACE (DEBUG::MidiDiskstreamIO, string_compose ("playback buffer read, from %1 to %2 (%3)", playback_sample, playback_sample + nframes, nframes));
+ events_read = _midi_buf->read (*target, playback_sample, playback_sample + nframes);
+ }
+
+ DEBUG_TRACE (DEBUG::MidiDiskstreamIO, string_compose (
+ "%1 MDS events read %2 range %3 .. %4 rspace %5 wspace %6 r@%7 w@%8\n",
+ _name, events_read, playback_sample, playback_sample + nframes,
+ _midi_buf->read_space(), _midi_buf->write_space(),
+ _midi_buf->get_read_ptr(), _midi_buf->get_write_ptr()));
+ }
+
+ g_atomic_int_add (&_samples_read_from_ringbuffer, nframes);
+
+ /* vari-speed */
+
+ if (speed != 0.0 && fabsf (speed) != 1.0f) {
+ for (MidiBuffer::iterator i = target->begin(); i != target->end(); ++i) {
+ MidiBuffer::TimeType *tme = i.timeptr();
+ *tme = (*tme) * nframes / disk_samples_to_consume;
+ }
+ }
+
+ if (ms & MonitoringInput) {
+ dst.merge_from (*target, nframes);
+ }
+
+ //cerr << "======== POST ========\n";
+ //_midi_buf->dump (cerr);
+ //cerr << "----------------\n";
+}
+
+/** @a start is set to the new sample position (TIME) read up to */
+int
+DiskReader::midi_read (samplepos_t& start, samplecnt_t dur, bool reversed)
+{
+ samplecnt_t this_read = 0;
+ samplepos_t loop_end = 0;
+ samplepos_t loop_start = 0;
+ samplecnt_t loop_length = 0;
+ Location* loc = loop_location;
+ samplepos_t effective_start = start;
+ Evoral::Range<samplepos_t>* loop_range (0);
+
+ DEBUG_TRACE (DEBUG::MidiDiskstreamIO, string_compose ("MDS::midi_read @ %1 cnt %2\n", start, dur));
+
+ boost::shared_ptr<MidiTrack> mt = boost::dynamic_pointer_cast<MidiTrack>(_route);
+ MidiChannelFilter* filter = mt ? &mt->playback_filter() : 0;
+ sampleoffset_t loop_offset = 0;
+
+ if (!reversed && loc) {
+ get_location_times (loc, &loop_start, &loop_end, &loop_length);
+ }
+
+ while (dur) {
+
+ /* take any loop into account. we can't read past the end of the loop. */
+
+ if (loc && !reversed) {
+
+ if (!loop_range) {
+ loop_range = new Evoral::Range<samplepos_t> (loop_start, loop_end-1); // inclusive semantics require -1
+ }
+
+ /* if we are (seamlessly) looping, ensure that the first sample we read is at the correct
+ position within the loop.
+ */
+
+ effective_start = loop_range->squish (effective_start);
+
+ if ((loop_end - effective_start) <= dur) {
+ /* too close to end of loop to read "dur", so
+ shorten it.
+ */
+ this_read = loop_end - effective_start;
+ } else {
+ this_read = dur;
+ }
+
+ } else {
+ this_read = dur;
+ }
+
+ if (this_read == 0) {
+ break;
+ }
+
+ this_read = min (dur,this_read);
+
+ DEBUG_TRACE (DEBUG::MidiDiskstreamIO, string_compose ("MDS ::read at %1 for %2 loffset %3\n", effective_start, this_read, loop_offset));
+
+ if (midi_playlist()->read (*_midi_buf, effective_start, this_read, loop_range, 0, filter) != this_read) {
+ error << string_compose(
+ _("MidiDiskstream %1: cannot read %2 from playlist at sample %3"),
+ id(), this_read, start) << endmsg;
+ return -1;
+ }
+
+ g_atomic_int_add (&_samples_written_to_ringbuffer, this_read);
+
+ if (reversed) {
+
+ // Swap note ons with note offs here. etc?
+ // Fully reversing MIDI requires look-ahead (well, behind) to find previous
+ // CC values etc. hard.
+
+ } else {
+
+ /* adjust passed-by-reference argument (note: this is
+ monotonic and does not reflect looping.
+ */
+ start += this_read;
+
+ /* similarly adjust effective_start, but this may be
+ readjusted for seamless looping as we continue around
+ the loop.
+ */
+ effective_start += this_read;
+ }
+
+ dur -= this_read;
+ }
+
+ return 0;
+}
+
+int
+DiskReader::refill_midi ()
+{
+ if (!_playlists[DataType::MIDI]) {
+ return 0;
+ }
+
+ const size_t write_space = _midi_buf->write_space();
+ const bool reversed = _session.transport_speed() < 0.0f;
+
+ DEBUG_TRACE (DEBUG::DiskIO, string_compose ("MIDI refill, write space = %1 file sample = %2\n", write_space, file_sample[DataType::MIDI]));
+
+ /* no space to write */
+ if (write_space == 0) {
+ return 0;
+ }
+
+ if (reversed) {
+ return 0;
+ }
+
+ /* at end: nothing to do */
+
+ samplepos_t ffm = file_sample[DataType::MIDI];
+
+ if (ffm == max_samplepos) {
+ return 0;
+ }
+
+ int ret = 0;
+ const uint32_t samples_read = g_atomic_int_get (&_samples_read_from_ringbuffer);
+ const uint32_t samples_written = g_atomic_int_get (&_samples_written_to_ringbuffer);
+
+ if ((samples_read < samples_written) && (samples_written - samples_read) >= midi_readahead) {
+ return 0;
+ }
+
+ samplecnt_t to_read = midi_readahead - ((samplecnt_t)samples_written - (samplecnt_t)samples_read);
+
+ to_read = min (to_read, (samplecnt_t) (max_samplepos - ffm));
+ to_read = min (to_read, (samplecnt_t) write_space);
+
+ if (midi_read (ffm, to_read, reversed)) {
+ ret = -1;
+ }
+
+ file_sample[DataType::MIDI] = ffm;
+
+ return ret;
+}
+
+void
+DiskReader::set_no_disk_output (bool yn)
+{
+ /* this MUST be called as part of the process call tree, before any
+ disk readers are invoked. We use it when the session needs the
+ transport (and thus effective read position for DiskReaders) to keep
+ advancing as part of syncing up with a transport master, but we
+ don't want any actual disk output yet because we are still not
+ synced.
+ */
+ _no_disk_output = yn;
}