#include <fcntl.h>
#include <cstdlib>
#include <ctime>
+#include <strings.h> // for ffs(3)
#include <sys/stat.h>
#include <sys/mman.h>
, _note_mode(Sustained)
, _frames_written_to_ringbuffer(0)
, _frames_read_from_ringbuffer(0)
+ , _frames_pending_write(0)
+ , _num_captured_loops(0)
, _gui_feed_buffer(AudioEngine::instance()->raw_buffer_size (DataType::MIDI))
{
in_set_state = true;
, _note_mode(Sustained)
, _frames_written_to_ringbuffer(0)
, _frames_read_from_ringbuffer(0)
+ , _frames_pending_write(0)
+ , _num_captured_loops(0)
, _gui_feed_buffer(AudioEngine::instance()->raw_buffer_size (DataType::MIDI))
{
in_set_state = true;
seek (_session.transport_frame());
}
- if (_write_source) {
- _write_source->set_last_write_end (_session.transport_frame());
- }
+ g_atomic_int_set(const_cast<gint*> (&_frames_pending_write), 0);
+ g_atomic_int_set(const_cast<gint*> (&_num_captured_loops), 0);
}
int
_write_source->model()->set_note_mode(m);
}
+/** Get the start, end, and length of a location "atomically".
+ *
+ * Note: Locations don't get deleted, so all we care about when I say "atomic"
+ * is that we are always pointing to the same one and using start/length values
+ * obtained just once. Use this function to achieve this since location being
+ * a parameter achieves this.
+ */
+static void
+get_location_times(const Location* location,
+ framepos_t* start,
+ framepos_t* end,
+ framepos_t* length)
+{
+ if (location) {
+ *start = location->start();
+ *end = location->end();
+ *length = *end - *start;
+ }
+}
+
int
-MidiDiskstream::process (framepos_t transport_frame, pframes_t nframes, framecnt_t& playback_distance)
+MidiDiskstream::process (BufferSet& bufs, framepos_t transport_frame, pframes_t nframes, framecnt_t& playback_distance, bool need_disk_signal)
{
framecnt_t rec_offset = 0;
framecnt_t rec_nframes = 0;
return 1;
}
+ const Location* const loop_loc = loop_location;
+ framepos_t loop_start = 0;
+ framepos_t loop_end = 0;
+ framepos_t loop_length = 0;
+ get_location_times(loop_loc, &loop_start, &loop_end, &loop_length);
+
adjust_capture_position = 0;
if (nominally_recording || (re && was_recording && _session.get_record_enabled() && _session.config.get_punch_in())) {
calculate_record_range(ot, transport_frame, nframes, rec_nframes, rec_offset);
if (rec_nframes && !was_recording) {
- _write_source->mark_write_starting_now ();
- capture_captured = 0;
+ if (loop_loc) {
+ /* Loop recording, so pretend the capture started at the loop
+ start rgardless of what time it is now, so the source starts
+ at the loop start and can handle time wrapping around.
+ Otherwise, start the source right now as usual.
+ */
+ capture_captured = transport_frame - loop_start;
+ capture_start_frame = loop_start;
+ }
+ _write_source->mark_write_starting_now(
+ capture_start_frame, capture_captured, loop_length);
+ g_atomic_int_set(const_cast<gint*> (&_frames_pending_write), 0);
+ g_atomic_int_set(const_cast<gint*> (&_num_captured_loops), 0);
was_recording = true;
}
}
// Pump entire port buffer into the ring buffer (FIXME: split cycles?)
MidiBuffer& buf = sp->get_midi_buffer(nframes);
+ ChannelMode mode = AllChannels; // _track->get_capture_channel_mode ();
+ uint32_t mask = 0xffff; // _track->get_capture_channel_mask ();
+
for (MidiBuffer::iterator i = buf.begin(); i != buf.end(); ++i) {
- const Evoral::MIDIEvent<MidiBuffer::TimeType> ev(*i, false);
+ Evoral::MIDIEvent<MidiBuffer::TimeType> ev(*i, false);
#ifndef NDEBUG
if (DEBUG::MidiIO & PBD::debug_bits) {
const uint8_t* __data = ev.buffer();
DEBUG_TRACE (DEBUG::MidiIO, DEBUG_STR(a).str());
}
#endif
- _capture_buf->write(ev.time() + transport_frame, ev.type(), ev.size(), ev.buffer());
+ /* Write events to the capture buffer in frames from session start,
+ but ignoring looping so event time progresses monotonically.
+ The source knows the loop length so it knows exactly where the
+ event occurs in the series of recorded loops and can implement
+ any desirable behaviour. We don't want to send event with
+ transport time here since that way the source can not
+ reconstruct their actual time; future clever MIDI looping should
+ probabl be implemented in the source instead of here.
+ */
+ const framecnt_t loop_offset = _num_captured_loops * loop_length;
+
+ switch (mode) {
+ case AllChannels:
+ _capture_buf->write(transport_frame + loop_offset + ev.time(),
+ ev.type(), ev.size(), ev.buffer());
+ break;
+ case FilterChannels:
+ if (ev.is_channel_event()) {
+ if ((1<<ev.channel()) & mask) {
+ _capture_buf->write(transport_frame + loop_offset + ev.time(),
+ ev.type(), ev.size(), ev.buffer());
+ }
+ } else {
+ _capture_buf->write(transport_frame + loop_offset + ev.time(),
+ ev.type(), ev.size(), ev.buffer());
+ }
+ break;
+ case ForceChannel:
+ if (ev.is_channel_event()) {
+ ev.set_channel (ffs(mask) - 1);
+ }
+ _capture_buf->write(transport_frame + loop_offset + ev.time(),
+ ev.type(), ev.size(), ev.buffer());
+ break;
+ }
}
+ g_atomic_int_add(const_cast<gint*>(&_frames_pending_write), nframes);
if (buf.size() != 0) {
Glib::Threads::Mutex::Lock lm (_gui_feed_buffer_mutex, Glib::Threads::TRY_LOCK);
}
+ if (need_disk_signal) {
+ /* copy the diskstream data to all output buffers */
+
+ MidiBuffer& mbuf (bufs.get_midi (0));
+ get_playback (mbuf, nframes);
+
+ /* leave the audio count alone */
+ ChanCount cnt (DataType::MIDI, 1);
+ cnt.set (DataType::AUDIO, bufs.count().n_audio());
+ bufs.set_count (cnt);
+ }
+
return 0;
}
+frameoffset_t
+MidiDiskstream::calculate_playback_distance (pframes_t nframes)
+{
+ frameoffset_t playback_distance = nframes;
+
+ /* XXX: should be doing varispeed stuff once it's implemented in ::process() above */
+
+ if (_actual_speed < 0.0) {
+ return -playback_distance;
+ } else {
+ return playback_distance;
+ }
+}
+
bool
MidiDiskstream::commit (framecnt_t playback_distance)
{
adjust_capture_position = 0;
}
- uint32_t frames_read = g_atomic_int_get(&_frames_read_from_ringbuffer);
- uint32_t frames_written = g_atomic_int_get(&_frames_written_to_ringbuffer);
+ uint32_t frames_read = g_atomic_int_get(const_cast<gint*>(&_frames_read_from_ringbuffer));
+ uint32_t frames_written = g_atomic_int_get(const_cast<gint*>(&_frames_written_to_ringbuffer));
/*
cerr << name() << " MDS written: " << frames_written << " - read: " << frames_read <<
int
MidiDiskstream::read (framepos_t& start, framecnt_t dur, bool reversed)
{
- framecnt_t this_read = 0;
- bool reloop = false;
- framepos_t loop_end = 0;
- framepos_t loop_start = 0;
- Location *loc = 0;
+ framecnt_t this_read = 0;
+ bool reloop = false;
+ framepos_t loop_end = 0;
+ framepos_t loop_start = 0;
+ framecnt_t loop_length = 0;
+ Location* loc = 0;
if (!reversed) {
- framecnt_t loop_length = 0;
-
- /* Make the use of a Location atomic for this read operation.
-
- Note: Locations don't get deleted, so all we care about
- when I say "atomic" is that we are always pointing to
- the same one and using a start/length values obtained
- just once.
- */
-
- if ((loc = loop_location) != 0) {
- loop_start = loc->start();
- loop_end = loc->end();
- loop_length = loop_end - loop_start;
- }
+ loc = loop_location;
+ get_location_times(loc, &loop_start, &loop_end, &loop_length);
/* if we are looping, ensure that the first frame we read is at the correct
position within the loop.
MidiDiskstream::do_flush (RunContext /*context*/, bool force_flush)
{
framecnt_t to_write;
- framecnt_t total;
int32_t ret = 0;
if (!_write_source) {
return 0;
}
- total = _session.transport_frame() - _write_source->last_write_end();
+ const framecnt_t total = g_atomic_int_get(const_cast<gint*> (&_frames_pending_write));
if (total == 0 ||
_capture_buf->read_space() == 0 ||
}
/* if there are 2+ chunks of disk i/o possible for
- this track, let the caller know so that it can arrange
+ this track), let the caller know so that it can arrange
for us to be called again, ASAP.
if we are forcing a flush, then if there is* any* extra
error << string_compose(_("MidiDiskstream %1: cannot write to disk"), id()) << endmsg;
return -1;
}
+ g_atomic_int_add(const_cast<gint*> (&_frames_pending_write), -to_write);
}
out:
}
void
-MidiDiskstream::transport_looped (framepos_t transport_frame)
+MidiDiskstream::transport_looped (framepos_t)
{
+ /* Here we only keep track of the number of captured loops so monotonic
+ event times can be delivered to the write source in process(). Trying
+ to be clever here is a world of trouble, it is better to simply record
+ the input in a straightforward non-destructive way. In the future when
+ we want to implement more clever MIDI looping modes it should be done in
+ the Source and/or entirely after the capture is finished.
+ */
if (was_recording) {
-
- // adjust the capture length knowing that the data will be recorded to disk
- // only necessary after the first loop where we're recording
- if (capture_info.size() == 0) {
- capture_captured += _capture_offset;
-
- if (_alignment_style == ExistingMaterial) {
- capture_captured += _session.worst_output_latency();
- } else {
- capture_captured += _roll_delay;
- }
- }
-
- finish_capture ();
-
- // the next region will start recording via the normal mechanism
- // we'll set the start position to the current transport pos
- // no latency adjustment or capture offset needs to be made, as that already happened the first time
- capture_start_frame = transport_frame;
- first_recordable_frame = transport_frame; // mild lie
- last_recordable_frame = max_framepos;
- was_recording = true;
- }
-
- if (!Config->get_seamless_loop()) {
- reset_tracker ();
+ g_atomic_int_add(const_cast<gint*> (&_num_captured_loops), 1);
}
}
boost::shared_ptr<MidiPort> sp = _source_port.lock ();
if (sp && Config->get_monitoring_model() == HardwareMonitoring) {
- sp->request_jack_monitors_input (!(_session.config.get_auto_input() && rolling));
+ sp->request_input_monitoring (!(_session.config.get_auto_input() && rolling));
}
return true;
char buf[64];
LocaleGuard lg (X_("POSIX"));
- node.add_property("channel-mode", enum_2_string(get_channel_mode()));
- snprintf (buf, sizeof(buf), "0x%x", get_channel_mask());
- node.add_property("channel-mask", buf);
-
if (_write_source && _session.get_record_enabled()) {
XMLNode* cs_child = new XMLNode (X_("CapturingSources"));
int
MidiDiskstream::set_state (const XMLNode& node, int version)
{
- const XMLProperty* prop;
XMLNodeList nlist = node.children();
XMLNodeIterator niter;
XMLNode* capture_pending_node = 0;
return -1;
}
- ChannelMode channel_mode = AllChannels;
- if ((prop = node.property ("channel-mode")) != 0) {
- channel_mode = ChannelMode (string_2_enum(prop->value(), channel_mode));
- }
-
- unsigned int channel_mask = 0xFFFF;
- if ((prop = node.property ("channel-mask")) != 0) {
- sscanf (prop->value().c_str(), "0x%x", &channel_mask);
- if (channel_mask & (~0xFFFF)) {
- warning << _("MidiDiskstream: XML property channel-mask out of range") << endmsg;
- }
- }
-
-
if (capture_pending_node) {
use_pending_capture_data (*capture_pending_node);
}
- set_channel_mode (channel_mode, channel_mask);
-
in_set_state = false;
return 0;
}
void
-MidiDiskstream::ensure_jack_monitors_input (bool yn)
+MidiDiskstream::ensure_input_monitoring (bool yn)
{
boost::shared_ptr<MidiPort> sp = _source_port.lock ();
if (sp) {
- sp->ensure_jack_monitors_input (yn);
+ sp->ensure_input_monitoring (yn);
}
}
projects / ardour.git / blobdiff