_intreturn.reset (new InternalReturn (_session));
_intreturn->activate ();
- /* the thing that provides proper control over a control/monitor/listen bus
+ /* the thing that provides proper control over a control/monitor/listen bus
(such as per-channel cut, dim, solo, invert, etc).
*/
_monitor_control.reset (new MonitorProcessor (_session));
{
DEBUG_TRACE (DEBUG::Destruction, string_compose ("route %1 destructor\n", _name));
- /* do this early so that we don't get incoming signals as we are going through destruction
+ /* do this early so that we don't get incoming signals as we are going through destruction
*/
drop_connections ();
/* don't use clear_processors here, as it depends on the session which may
- be half-destroyed by now
+ be half-destroyed by now
*/
Glib::RWLock::WriterLock lm (_processor_lock);
}
bool changed = false;
-
+
for (; i != order_keys.end(); ++i) {
if (i->second != key) {
i->second = key;
abort ();
}
}
-#endif
+#endif
/* should we NOT run plugins here if the route is inactive?
do we catch route != active somewhere higher?
*/
if (_solo_safe != yn) {
_solo_safe = yn;
solo_safe_changed (src);
- }
+ }
}
bool
DEBUG_TRACE (DEBUG::Solo, string_compose (
"%1 SbU delta %2 = %3 old = %4 sbd %5 ss %6 exclusive %7\n",
- name(), delta, _soloed_by_others_upstream, old_sbu,
+ name(), delta, _soloed_by_others_upstream, old_sbu,
_soloed_by_others_downstream, _self_solo, Config->get_exclusive_solo()));
- /* push the inverse solo change to everything that feeds us.
+ /* push the inverse solo change to everything that feeds us.
This is important for solo-within-group. When we solo 1 track out of N that
feed a bus, that track will cause mod_solo_by_upstream (+1) to be called
on the bus. The bus then needs to call mod_solo_by_downstream (-1) on all
tracks that feed it. This will silence them if they were audible because
- of a bus solo, but the newly soloed track will still be audible (because
+ of a bus solo, but the newly soloed track will still be audible (because
it is self-soloed).
but .. do this only when we are being told to solo-by-upstream (i.e delta = +1),
*/
if ((_self_solo || _soloed_by_others_downstream) &&
- ((old_sbu == 0 && _soloed_by_others_upstream > 0) ||
+ ((old_sbu == 0 && _soloed_by_others_upstream > 0) ||
(old_sbu > 0 && _soloed_by_others_upstream == 0))) {
if (delta > 0 || !Config->get_exclusive_solo()) {
sr->mod_solo_by_others_downstream (-delta);
}
}
- }
+ }
}
set_mute_master_solo ();
_route_group->foreach_route (boost::bind (&Route::set_solo_isolated, _1, yn, _route_group));
return;
}
-
+
/* forward propagate solo-isolate status to everything fed by this route, but not those via sends only */
boost::shared_ptr<RouteList> routes = _session.get_routes ();
bool sends_only;
bool does_feed = direct_feeds (*i, &sends_only); // we will recurse anyway, so don't use ::feeds()
-
+
if (does_feed && !sends_only) {
(*i)->set_solo_isolated (yn, (*i)->route_group());
}
DEBUG_TRACE (DEBUG::Processors, string_compose (
"%1 adding processor %2\n", name(), processor->name()));
-
+
ChanCount old_pms = processor_max_streams;
if (!_session.engine().connected() || !processor) {
XMLNodeList const & children = node.children ();
XMLNodeList::const_iterator i = children.begin ();
-
+
while (i != children.end() && (*i)->name() != X_("Redirect")) {
++i;
}
if ((prop = node.property ("type")) != 0) {
- if (prop->value() == "ladspa" || prop->value() == "Ladspa" ||
+ if (prop->value() == "ladspa" || prop->value() == "Ladspa" ||
prop->value() == "lv2" ||
prop->value() == "vst" ||
prop->value() == "audiounit") {
{
Glib::RWLock::WriterLock lm (_processor_lock);
ProcessorState pstate (this);
-
+
ProcessorList::iterator i;
bool removed = false;
{
Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
-
+
if (configure_processors_unlocked (err)) {
pstate.restore ();
/* we know this will work, because it worked before :) */
{
Glib::RWLock::WriterLock lm (_processor_lock);
ProcessorState pstate (this);
-
+
ProcessorList::iterator i;
boost::shared_ptr<Processor> processor;
{
Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
-
+
if (configure_processors_unlocked (err)) {
pstate.restore ();
/* we know this will work, because it worked before :) */
Route::configure_processors (ProcessorStreams* err)
{
assert (!AudioEngine::instance()->process_lock().trylock());
-
+
if (!_in_configure_processors) {
Glib::RWLock::WriterLock lm (_processor_lock);
return configure_processors_unlocked (err);
}
-
+
return 0;
}
DEBUG_TRACE (DEBUG::Processors, "--- CONFIGURE ABORTED due to unknown processor.\n");
break;
}
-
+
if ((*p)->can_support_io_configuration(in, out)) {
DEBUG_TRACE (DEBUG::Processors, string_compose ("\t%1 ID=%2 in=%3 out=%4\n",(*p)->name(), (*p)->id(), in, out));
configuration.push_back(make_pair(in, out));
}
DEBUG_TRACE (DEBUG::Processors, "}\n");
-
+
return configuration;
}
if (boost::dynamic_pointer_cast<UnknownProcessor> (*p)) {
break;
}
-
+
(*p)->configure_io(c->first, c->second);
processor_max_streams = ChanCount::max(processor_max_streams, c->first);
processor_max_streams = ChanCount::max(processor_max_streams, c->second);
{
Glib::RWLock::WriterLock lm (_processor_lock);
ProcessorState pstate (this);
-
+
ProcessorList::iterator oiter;
ProcessorList::const_iterator niter;
ProcessorList as_it_will_be;
{
Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
-
+
if (configure_processors_unlocked (err)) {
pstate.restore ();
return -1;
} else {
_flags = Flag (0);
}
-
+
if ((prop = node.property (X_("phase-invert"))) != 0) {
boost::dynamic_bitset<> p (_input->n_ports().n_audio ());
if (string_is_affirmative (prop->value ())) {
p.set ();
- }
+ }
set_phase_invert (p);
}
}
if ((prop = node.property (X_("muted"))) != 0) {
-
+
bool first = true;
bool muted = string_is_affirmative (prop->value());
-
+
if (muted) {
string mute_point;
-
+
if ((prop = node.property (X_("mute-affects-pre-fader"))) != 0) {
-
+
if (string_is_affirmative (prop->value())){
mute_point = mute_point + "PreFader";
first = false;
}
}
-
+
if ((prop = node.property (X_("mute-affects-post-fader"))) != 0) {
-
+
if (string_is_affirmative (prop->value())){
-
+
if (!first) {
mute_point = mute_point + ",";
}
-
+
mute_point = mute_point + "PostFader";
first = false;
}
}
if ((prop = node.property (X_("mute-affects-control-outs"))) != 0) {
-
+
if (string_is_affirmative (prop->value())){
-
+
if (!first) {
mute_point = mute_point + ",";
}
-
+
mute_point = mute_point + "Listen";
first = false;
}
}
if ((prop = node.property (X_("mute-affects-main-outs"))) != 0) {
-
+
if (string_is_affirmative (prop->value())){
-
+
if (!first) {
mute_point = mute_point + ",";
}
-
+
mute_point = mute_point + "Main";
}
}
-
+
_mute_master->set_mute_points (mute_point);
_mute_master->set_muted_by_self (true);
}
_active = !yn; // force switch
set_active (yn, this);
}
-
+
if ((prop = child->property (X_("gain"))) != 0) {
gain_t val;
_amp->gain_control()->set_value (val);
}
}
-
+
/* Set up Panners in the IO */
XMLNodeList io_nlist = child->children ();
-
+
XMLNodeConstIterator io_niter;
XMLNode *io_child;
-
+
for (io_niter = io_nlist.begin(); io_niter != io_nlist.end(); ++io_niter) {
io_child = *io_niter;
-
+
if (io_child->name() == X_("Panner")) {
_main_outs->panner_shell()->set_state(*io_child, version);
} else if (io_child->name() == X_("Automation")) {
set_remote_control_id (x);
}
- }
+ }
}
return 0;
}
}
- // If the processor (*niter) is not on the route then create it
+ // If the processor (*niter) is not on the route then create it
if (o == _processors.end()) {
Route::silence_unlocked (framecnt_t nframes)
{
/* Must be called with the processor lock held */
-
+
if (!_silent) {
_output->silence (nframes);
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
boost::shared_ptr<PluginInsert> pi;
-
+
if (!_active && (pi = boost::dynamic_pointer_cast<PluginInsert> (*i)) != 0) {
// skip plugins, they don't need anything when we're not active
continue;
}
-
+
(*i)->silence (nframes);
}
-
+
if (nframes == _session.get_block_size()) {
// _silent = true;
}
{
/* master never sends to control outs */
assert (!is_master ());
-
+
/* make sure we have one */
if (!_monitor_send) {
_monitor_send.reset (new InternalSend (_session, _pannable, _mute_master, _session.monitor_out(), Delivery::Listen));
_monitor_send->set_display_to_user (false);
}
-
+
/* set it up */
Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
configure_processors (0);
return 0;
}
-/** Add an internal send to a route.
+/** Add an internal send to a route.
* @param route route to send to.
* @param placement placement for the send.
*/
Route::listen_via (boost::shared_ptr<Route> route, Placement placement)
{
assert (route != _session.monitor_out ());
-
+
{
Glib::RWLock::ReaderLock rm (_processor_lock);
return true;
}
-
+
for (ProcessorList::iterator r = _processors.begin(); r != _processors.end(); ++r) {
boost::shared_ptr<IOProcessor> iop;
} else {
DEBUG_TRACE (DEBUG::Graph, string_compose ("\tPROC %1 is not an IOP\n", (*r)->name()));
}
-
+
}
DEBUG_TRACE (DEBUG::Graph, string_compose ("\tdoes NOT feed %1\n", other->name()));
if (_session.transport_speed() != 0.0f) {
/* we're rolling but some state is changing (e.g. our diskstream contents)
so we cannot use them. Be silent till this is over.
-
+
XXX note the absurdity of ::no_roll() being called when we ARE rolling!
*/
silence_unlocked (nframes);
_roll_delay = 0;
- }
+ }
return nframes;
}
if (!lm.locked()) {
return 0;
}
-
+
automation_snapshot (_session.transport_frame(), false);
if (n_outputs().n_total() == 0) {
}
_meter_point = p;
-
+
bool meter_was_visible_to_user = _meter->display_to_user ();
{
Glib::RWLock::WriterLock lm (_processor_lock);
-
+
if (_meter_point != MeterCustom) {
_meter->set_display_to_user (false);
-
+
setup_invisible_processors ();
-
+
ProcessorList::iterator loc = find (_processors.begin(), _processors.end(), _meter);
ChanCount m_in;
-
+
if (loc == _processors.begin()) {
m_in = _input->n_ports();
} else {
--before;
m_in = (*before)->output_streams ();
}
-
+
_meter->reflect_inputs (m_in);
-
+
/* we do not need to reconfigure the processors, because the meter
(a) is always ready to handle processor_max_streams
(b) is always an N-in/N-out processor, and thus moving
it doesn't require any changes to the other processors.
*/
-
+
} else {
-
+
// just make it visible and let the user move it
-
+
_meter->set_display_to_user (true);
}
}
meter_change (); /* EMIT SIGNAL */
bool const meter_visibly_changed = (_meter->display_to_user() != meter_was_visible_to_user);
-
+
processors_changed (RouteProcessorChange (RouteProcessorChange::MeterPointChange, meter_visibly_changed)); /* EMIT SIGNAL */
}
{
Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
-
+
if (configure_processors_unlocked (0)) {
pstate.restore ();
configure_processors_unlocked (0); // it worked before we tried to add it ...
Route::add_export_point()
{
if (!_capturing_processor) {
-
+
_capturing_processor.reset (new CapturingProcessor (_session));
_capturing_processor->activate ();
}
}
-
+
return _capturing_processor;
}
if (!r) {
return;
}
-
+
rl->push_back (r);
if (Config->get_solo_control_is_listen_control()) {
if (!r) {
return 0;
}
-
+
if (Config->get_solo_control_is_listen_control()) {
return r->listening_via_monitor() ? 1.0f : 0.0f;
} else {
if (!r) {
return;
}
-
+
rl->push_back (r);
_session.set_mute (rl, bval);
}
if (!r) {
return 0;
}
-
+
return r->muted() ? 1.0f : 0.0f;
}
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
(*i)->set_block_size (nframes);
}
-
+
_session.ensure_buffers (n_process_buffers ());
}
* just fine as it is (it will not contain the route
* name if its a port insert, port send or port return).
*/
-
+
if (_main_outs) {
if (_main_outs->set_name (name)) {
/* XXX returning false here is stupid because
_route_group->foreach_route (boost::bind (&Route::set_active, _1, yn, _route_group));
return;
}
-
+
if (_active != yn) {
_active = yn;
_input->set_active (yn);
if (n-- == 0) {
return *i;
}
- }
+ }
}
return boost::shared_ptr<Processor> ();
Route::unknown_processors () const
{
list<string> p;
-
+
Glib::RWLock::ReaderLock lm (_processor_lock);
for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
if (boost::dynamic_pointer_cast<UnknownProcessor const> (*i)) {
}
/* we'll build this new list here and then use it */
-
+
ProcessorList new_processors;
/* find visible processors */
-
+
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
if ((*i)->display_to_user ()) {
new_processors.push_back (*i);
assert (!_monitor_control->display_to_user ());
new_processors.push_front (_monitor_control);
}
-
+
/* INTERNAL RETURN */
/* doing this here means that any monitor control will come just after
}
/* EXPORT PROCESSOR */
-
+
if (_capturing_processor) {
assert (!_capturing_processor->display_to_user ());
new_processors.push_front (_capturing_processor);
projects / ardour.git / blobdiff