#include "pbd/xml++.h"
#include "pbd/enumwriter.h"
+#include "pbd/locale_guard.h"
#include "pbd/memento_command.h"
#include "pbd/stacktrace.h"
-#include "pbd/convert.h"
+#include "pbd/types_convert.h"
#include "pbd/unwind.h"
#include "ardour/amp.h"
#include "ardour/capturing_processor.h"
#include "ardour/debug.h"
#include "ardour/delivery.h"
+#include "ardour/disk_reader.h"
+#include "ardour/disk_writer.h"
#include "ardour/event_type_map.h"
#include "ardour/gain_control.h"
#include "ardour/internal_return.h"
#include "ardour/delayline.h"
#include "ardour/midi_buffer.h"
#include "ardour/midi_port.h"
+#include "ardour/monitor_control.h"
#include "ardour/monitor_processor.h"
#include "ardour/pannable.h"
#include "ardour/panner.h"
#include "ardour/parameter_descriptor.h"
#include "ardour/phase_control.h"
#include "ardour/plugin_insert.h"
+#include "ardour/polarity_processor.h"
#include "ardour/port.h"
#include "ardour/port_insert.h"
#include "ardour/processor.h"
#include "ardour/session.h"
#include "ardour/solo_control.h"
#include "ardour/solo_isolate_control.h"
+#include "ardour/types_convert.h"
#include "ardour/unknown_processor.h"
#include "ardour/utils.h"
#include "ardour/vca.h"
: Stripable (sess, name, PresentationInfo (flag))
, GraphNode (sess._process_graph)
, Muteable (sess, name)
- , Automatable (sess)
, _active (true)
, _signal_latency (0)
- , _signal_latency_at_amp_position (0)
- , _signal_latency_at_trim_position (0)
- , _initial_delay (0)
- , _roll_delay (0)
+ , _disk_io_point (DiskIOPreFader)
, _pending_process_reorder (0)
, _pending_signals (0)
, _pending_declick (true)
, _meter_type (MeterPeak)
, _denormal_protection (false)
, _recordable (true)
- , _silent (false)
, _declickable (false)
, _have_internal_generator (false)
, _default_type (default_type)
+ , _loop_location (NULL)
, _track_number (0)
+ , _strict_io (false)
, _in_configure_processors (false)
, _initial_io_setup (false)
, _in_sidechain_setup (false)
- , _strict_io (false)
, _custom_meter_position_noted (false)
, _pinmgr_proxy (0)
+ , _patch_selector_dialog (0)
{
processor_max_streams.reset();
}
boost::weak_ptr<Route>
Route::weakroute () {
- return boost::weak_ptr<Route> (shared_from_this ());
+ return boost::weak_ptr<Route> (boost::dynamic_pointer_cast<Route> (shared_from_this ()));
}
int
/* add standard controls */
_gain_control.reset (new GainControl (_session, GainAutomation));
- add_control (_gain_control);
-
_trim_control.reset (new GainControl (_session, TrimAutomation));
- add_control (_trim_control);
+ /* While the route has-a gain-control for consistency with Stripable and VCA
+ * ownership is handed over to the Amp Processor which manages the
+ * state of the Control and AutomationList as part of its
+ * Automatable API. -- Don't call add_control () here.
+ */
_solo_control.reset (new SoloControl (_session, X_("solo"), *this, *this));
add_control (_solo_control);
_amp.reset (new Amp (_session, X_("Fader"), _gain_control, true));
add_processor (_amp, PostFader);
+ _polarity.reset (new PolarityProcessor (_session, _phase_control));
+ _polarity->activate();
+ _polarity->set_owner (this);
+
if (is_monitor ()) {
_amp->set_display_name (_("Monitor"));
}
-#if 0 // not used - just yet
if (!is_master() && !is_monitor() && !is_auditioner()) {
- _delayline.reset (new DelayLine (_session, _name));
- add_processor (_delayline, PreFader);
+ _delayline.reset (new DelayLine (_session, name ()));
}
-#endif
/* and input trim */
}
void
-Route::maybe_declick (BufferSet&, framecnt_t, int)
+Route::maybe_declick (BufferSet&, samplecnt_t, int)
{
/* this is the "bus" implementation and they never declick.
*/
/** Process this route for one (sub) cycle (process thread)
*
* @param bufs Scratch buffers to use for the signal path
- * @param start_frame Initial transport frame
- * @param end_frame Final transport frame
- * @param nframes Number of frames to output (to ports)
+ * @param start_sample Initial transport sample
+ * @param end_sample Final transport sample
+ * @param nframes Number of samples to output (to ports)
*
- * Note that (end_frame - start_frame) may not be equal to nframes when the
+ * Note that (end_sample - start_sample) may not be equal to nframes when the
* transport speed isn't 1.0 (eg varispeed).
*/
void
Route::process_output_buffers (BufferSet& bufs,
- framepos_t start_frame, framepos_t end_frame, pframes_t nframes,
- int declick, bool gain_automation_ok)
+ samplepos_t start_sample, samplepos_t end_sample, pframes_t nframes,
+ int declick, bool gain_automation_ok, bool run_disk_reader)
{
/* Caller must hold process lock */
assert (!AudioEngine::instance()->process_lock().trylock());
Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
if (!lm.locked()) {
- // can this actually happen? functions calling process_output_buffers()
- // already take a reader-lock.
+ // can this actually happen?
+ // Places that need a WriterLock on (_processor_lock) must also take the process-lock.
bufs.silence (nframes, 0);
+ assert (0); // ...one way to find out.
return;
}
- _mute_control->automation_run (start_frame, nframes);
+ /* We should offset the route-owned ctrls by the given latency, however
+ * this only affects Mute. Other route-owned controls (solo, polarity..)
+ * are not automatable.
+ *
+ * Mute has its own issues since there's not a single mute-point,
+ * but in general
+ */
+ automation_run (start_sample, nframes);
+
+ if (_pannable) {
+ _pannable->automation_run (start_sample + _signal_latency, nframes);
+ }
/* figure out if we're going to use gain automation */
if (gain_automation_ok) {
_amp->set_gain_automation_buffer (_session.gain_automation_buffer ());
_amp->setup_gain_automation (
- start_frame + _signal_latency_at_amp_position,
- end_frame + _signal_latency_at_amp_position,
+ start_sample + _amp->output_latency (),
+ end_sample + _amp->output_latency (),
nframes);
_trim->set_gain_automation_buffer (_session.trim_automation_buffer ());
_trim->setup_gain_automation (
- start_frame + _signal_latency_at_trim_position,
- end_frame + _signal_latency_at_trim_position,
+ start_sample + _trim->output_latency (),
+ end_sample + _trim->output_latency (),
nframes);
+ }
+
+ /* We align the playhead to output. The user hears what the clock says:
+ * When the playhead/clock says 1:00:00:00 the user will hear the audio sample
+ * at 1:00:00:00. sample_start will be [sample at] 1:00:00:00
+ *
+ * e.g. clock says Time T = 0, sample_start = 0
+ * Disk-read(play) -> latent-plugin (+10) -> fader-automation -> output (+5)
+ * -> total playback latency "disk -> out" is 15.
+ * -> at Time T= -15, the disk-reader reads sample T=0.
+ * By the Time T=0 is reached (dt=15 later) that sample is audible.
+ */
+
+ const double speed = (is_auditioner() ? 1.0 : _session.transport_speed ());
+
+ const sampleoffset_t latency_offset = _signal_latency + _output->latency ();
+ if (speed < 0) {
+ /* when rolling backwards this can become negative */
+ start_sample -= latency_offset;
+ end_sample -= latency_offset;
} else {
- _amp->apply_gain_automation (false);
- _trim->apply_gain_automation (false);
+ start_sample += latency_offset;
+ end_sample += latency_offset;
}
- /* Tell main outs what to do about monitoring. We do this so that
- on a transition between monitoring states we get a de-clicking gain
- change in the _main_outs delivery, if config.get_use_monitor_fades()
- is true.
+ /* Note: during intial pre-roll 'start_sample' as passed as argument can be negative.
+ * Functions calling process_output_buffers() will set "run_disk_reader"
+ * to false if the pre-roll count-down is larger than playback_latency ().
+ *
+ * playback_latency() is guarnteed to be <= _signal_latency + _output->latency ()
+ */
+ assert (!_disk_reader || !run_disk_reader || start_sample >= 0 || speed < 0);
- We override this in the case where we have an internal generator.
- */
- bool silence = _have_internal_generator ? false : (monitoring_state () == MonitoringSilence);
+ /* however the disk-writer may need to pick up output from other tracks
+ * during pre-roll (in particular if this route has latent effects after the disk).
+ *
+ * e.g. track 1 play -> latency A --port--> track2 capture -> latency B ---> out
+ * total pre-roll = A + B.
+ *
+ * Note the disk-writer has built-in overlap detection (it's safe to run it early)
+ * given that
+ */
+ bool run_disk_writer = false;
+ if (_disk_writer && speed > 0) {
+ samplecnt_t latency_preroll = _session.remaining_latency_preroll ();
+ run_disk_writer = latency_preroll < nframes + (_signal_latency + _output->latency ());
+ if (end_sample - _disk_writer->input_latency () < _session.transport_sample ()) {
+ run_disk_writer = true;
+ }
+ }
+
+ /* Tell main outs what to do about monitoring. We do this so that
+ * on a transition between monitoring states we get a de-clicking gain
+ * change in the _main_outs delivery, if config.get_use_monitor_fades()
+ * is true.
+ *
+ * We override this in the case where we have an internal generator.
+ *
+ * FIXME: when punching in/out this also depends on latency compensated time
+ * for this route. monitoring_state() does not currently handle that correctly,.
+ *
+ * Also during remaining_latency_preroll, transport_rolling () is false, but
+ * we may need to monitor disk instead.
+ */
+ MonitorState ms = monitoring_state ();
+ bool silence = _have_internal_generator ? false : (ms == MonitoringSilence);
_main_outs->no_outs_cuz_we_no_monitor (silence);
GLOBAL DECLICK (for transport changes etc.)
----------------------------------------------------------------------------------------- */
+ // XXX not latency compensated. calls Amp::declick, but there may be
+ // plugins between disk and Fader.
maybe_declick (bufs, nframes, declick);
_pending_declick = 0;
/* -------------------------------------------------------------------------------------------
- DENORMAL CONTROL/PHASE INVERT
+ DENORMAL CONTROL
----------------------------------------------------------------------------------------- */
+ /* XXX We'll need to protect silent inputs as well as silent disk
+ * (when not monitoring input or monitoring disk and there's no region
+ * for a longer time).
+ *
+ * ...or simply drop that feature.
+ */
+ if (_denormal_protection || Config->get_denormal_protection()) {
- if (!_phase_control->none()) {
-
- int chn = 0;
-
- if (_denormal_protection || Config->get_denormal_protection()) {
-
- for (BufferSet::audio_iterator i = bufs.audio_begin(); i != bufs.audio_end(); ++i, ++chn) {
- Sample* const sp = i->data();
-
- if (_phase_control->inverted (chn)) {
- for (pframes_t nx = 0; nx < nframes; ++nx) {
- sp[nx] = -sp[nx];
- sp[nx] += 1.0e-27f;
- }
- } else {
- for (pframes_t nx = 0; nx < nframes; ++nx) {
- sp[nx] += 1.0e-27f;
- }
- }
- }
-
- } else {
-
- for (BufferSet::audio_iterator i = bufs.audio_begin(); i != bufs.audio_end(); ++i, ++chn) {
- Sample* const sp = i->data();
-
- if (_phase_control->inverted (chn)) {
- for (pframes_t nx = 0; nx < nframes; ++nx) {
- sp[nx] = -sp[nx];
- }
- }
- }
- }
-
- } else {
-
- if (_denormal_protection || Config->get_denormal_protection()) {
-
- for (BufferSet::audio_iterator i = bufs.audio_begin(); i != bufs.audio_end(); ++i) {
- Sample* const sp = i->data();
- for (pframes_t nx = 0; nx < nframes; ++nx) {
- sp[nx] += 1.0e-27f;
- }
+ for (BufferSet::audio_iterator i = bufs.audio_begin(); i != bufs.audio_end(); ++i) {
+ Sample* const sp = i->data();
+ for (pframes_t nx = 0; nx < nframes; ++nx) {
+ sp[nx] += 1.0e-27f;
}
-
}
}
+
/* -------------------------------------------------------------------------------------------
and go ....
----------------------------------------------------------------------------------------- */
- /* set this to be true if the meter will already have been ::run() earlier */
- bool const meter_already_run = metering_state() == MeteringInput;
-
- framecnt_t latency = 0;
- const double speed = _session.transport_speed ();
+ samplecnt_t latency = 0;
for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
- if (meter_already_run && boost::dynamic_pointer_cast<PeakMeter> (*i)) {
- /* don't ::run() the meter, otherwise it will have its previous peak corrupted */
- continue;
- }
+ /* TODO check for split cycles here.
+ *
+ * start_frame, end_frame is adjusted by latency and may
+ * cross loop points.
+ */
#ifndef NDEBUG
/* if it has any inputs, make sure they match */
}
#endif
- /* should we NOT run plugins here if the route is inactive?
- do we catch route != active somewhere higher?
- */
+ bool re_inject_oob_data = false;
+ if ((*i) == _disk_reader) {
+ /* Well now, we've made it past the disk-writer and to the disk-reader.
+ * Time to decide what to do about monitoring.
+ *
+ * Even when not doing MonitoringDisk, we need to run the processors,
+ * so that it advances its internal buffers (IFF run_disk_reader is true).
+ *
+ */
+ if (ms == MonitoringDisk || ms == MonitoringSilence) {
+ /* this will clear out-of-band data, too (e.g. MIDI-PC, Panic etc.
+ * OOB data is written at the end of the cycle (nframes - 1),
+ * and jack does not re-order events, so we push them back later */
+ re_inject_oob_data = true;
+ bufs.silence (nframes, 0);
+ }
+ }
- if (boost::dynamic_pointer_cast<Send>(*i) != 0) {
- boost::dynamic_pointer_cast<Send>(*i)->set_delay_in(_signal_latency - latency);
+ double pspeed = speed;
+ if ((!run_disk_reader && (*i) == _disk_reader) || (!run_disk_writer && (*i) == _disk_writer)) {
+ /* run with speed 0, no-roll */
+ pspeed = 0;
}
- if (boost::dynamic_pointer_cast<PluginInsert>(*i) != 0) {
- const framecnt_t longest_session_latency = _initial_delay + _signal_latency;
- boost::dynamic_pointer_cast<PluginInsert>(*i)->set_sidechain_latency (
- _initial_delay + latency, longest_session_latency - latency);
+
+ if (speed < 0) {
+ (*i)->run (bufs, start_sample + latency, end_sample + latency, pspeed, nframes, *i != _processors.back());
+ } else {
+ (*i)->run (bufs, start_sample - latency, end_sample - latency, pspeed, nframes, *i != _processors.back());
}
- (*i)->run (bufs, start_frame - latency, end_frame - latency, speed, nframes, *i != _processors.back());
bufs.set_count ((*i)->output_streams());
+ /* Note: plugin latency may change. While the plugin does inform the session via
+ * processor_latency_changed(). But the session may not yet have gotten around to
+ * update the actual worste-case and update this track's _signal_latency.
+ *
+ * So there can be cases where adding up all latencies may not equal _signal_latency.
+ */
if ((*i)->active ()) {
latency += (*i)->signal_latency ();
}
+
+ if (re_inject_oob_data) {
+ write_out_of_band_data (bufs, nframes);
+ }
+
+#if 0
+ if ((*i) == _delayline) {
+ latency += _delayline->delay ();
+ }
+#endif
}
}
void
-Route::bounce_process (BufferSet& buffers, framepos_t start, framecnt_t nframes,
+Route::bounce_process (BufferSet& buffers, samplepos_t start, samplecnt_t nframes,
boost::shared_ptr<Processor> endpoint,
bool include_endpoint, bool for_export, bool for_freeze)
{
return;
}
- framecnt_t latency = bounce_get_latency(_amp, false, for_export, for_freeze);
+ samplecnt_t latency = bounce_get_latency(_amp, false, for_export, for_freeze);
_amp->set_gain_automation_buffer (_session.gain_automation_buffer ());
_amp->setup_gain_automation (start - latency, start - latency + nframes, nframes);
}
}
-framecnt_t
+samplecnt_t
Route::bounce_get_latency (boost::shared_ptr<Processor> endpoint,
bool include_endpoint, bool for_export, bool for_freeze) const
{
- framecnt_t latency = 0;
+ samplecnt_t latency = 0;
if (!endpoint && !include_endpoint) {
return latency;
}
}
void
-Route::monitor_run (framepos_t start_frame, framepos_t end_frame, pframes_t nframes, int declick)
+Route::monitor_run (samplepos_t start_sample, samplepos_t end_sample, pframes_t nframes, int declick)
{
assert (is_monitor());
- BufferSet& bufs (_session.get_route_buffers (n_process_buffers()));
- fill_buffers_with_input (bufs, _input, nframes);
- passthru (bufs, start_frame, end_frame, nframes, declick);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
+ run_route (start_sample, end_sample, nframes, declick, true, false);
}
void
-Route::passthru (BufferSet& bufs, framepos_t start_frame, framepos_t end_frame, pframes_t nframes, int declick)
+Route::run_route (samplepos_t start_sample, samplepos_t end_sample, pframes_t nframes, int declick, bool gain_automation_ok, bool run_disk_reader)
{
- _silent = false;
+ BufferSet& bufs (_session.get_route_buffers (n_process_buffers()));
+
+ fill_buffers_with_input (bufs, _input, nframes);
+
+ /* filter captured data before meter sees it */
+ filter_input (bufs);
if (is_monitor() && _session.listening() && !_session.is_auditioning()) {
bufs.silence (nframes, 0);
}
- write_out_of_band_data (bufs, start_frame, end_frame, nframes);
- process_output_buffers (bufs, start_frame, end_frame, nframes, declick, true);
-}
+ snapshot_out_of_band_data (nframes);
+ /* append immediate messages to the first MIDI buffer (thus sending it to the first output port) */
-void
-Route::passthru_silence (framepos_t start_frame, framepos_t end_frame, pframes_t nframes, int declick)
-{
- BufferSet& bufs (_session.get_route_buffers (n_process_buffers(), true));
+ write_out_of_band_data (bufs, nframes);
+
+ /* run processor chain */
+
+ process_output_buffers (bufs, start_sample, end_sample, nframes, declick, gain_automation_ok, run_disk_reader);
- bufs.set_count (_input->n_ports());
- write_out_of_band_data (bufs, start_frame, end_frame, nframes);
- process_output_buffers (bufs, start_frame, end_frame, nframes, declick, false);
+ /* map events (e.g. MIDI-CC) back to control-parameters */
+ update_controls (bufs);
+
+ flush_processor_buffers_locked (nframes);
}
void
//A2 uses the "active" flag in the toplevel redirect node, not in the child plugin/IO
if (i != children.end()) {
if ((prop = (*i)->property (X_("active"))) != 0) {
- if ( string_is_affirmative (prop->value()) && (!_session.get_bypass_all_loaded_plugins () || !processor->display_to_user () ) )
+ if ( string_to<bool> (prop->value()) && (!_session.get_bypass_all_loaded_plugins () || !processor->display_to_user () ) )
processor->activate();
else
processor->deactivate();
Route::add_processors (const ProcessorList& others, boost::shared_ptr<Processor> before, ProcessorStreams* err)
{
ProcessorList::iterator loc;
+ boost::shared_ptr <PluginInsert> fanout;
+
+ if (g_atomic_int_get (&_pending_process_reorder)) {
+ /* we need to flush any pending re-order changes */
+ Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
+ apply_processor_changes_rt ();
+ }
if (before) {
loc = find(_processors.begin(), _processors.end(), before);
loc = _processors.end ();
}
- if (!AudioEngine::instance()->connected()) {
- return 1;
- }
-
if (others.empty()) {
return 0;
}
flags &= mask;
if (flags != None) {
- boost::optional<int> rv = PluginSetup (shared_from_this (), pi, flags); /* EMIT SIGNAL */
- switch (rv.get_value_or (0)) {
+ boost::optional<int> rv = PluginSetup (boost::dynamic_pointer_cast<Route>(shared_from_this ()), pi, flags); /* EMIT SIGNAL */
+ int mode = rv.get_value_or (0);
+ switch (mode & 3) {
case 1:
to_skip.push_back (*i); // don't add this one;
break;
default:
break;
}
+ if ((mode & 5) == 4) {
+ fanout = pi;
+ }
}
}
processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
set_processor_positions ();
+ if (fanout && fanout->configured ()
+ && fanout->output_streams().n_audio() > 2
+ && boost::dynamic_pointer_cast<PluginInsert> (the_instrument ()) == fanout) {
+ fan_out (); /* EMIT SIGNAL */
+ }
return 0;
}
if (!boost::dynamic_pointer_cast<PluginInsert> (*i)) {
continue;
}
+ if (!(*i)->display_to_user ()) {
+ continue;
+ }
+#ifdef MIXBUS
+ if (boost::dynamic_pointer_cast<PluginInsert> (*i)->is_channelstrip()) {
+ continue;
+ }
+#endif
if ((*i)->enabled ()) {
(*i)->enable (false);
/* backward = if the redirect was marked to go active on the next ab, do so */
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
-
if (!boost::dynamic_pointer_cast<PluginInsert> (*i)) {
continue;
}
+ if (!(*i)->display_to_user ()) {
+ continue;
+ }
+#ifdef MIXBUS
+ if (boost::dynamic_pointer_cast<PluginInsert> (*i)->is_channelstrip()) {
+ continue;
+ }
+#endif
(*i)->enable ((*i)->get_next_ab_is_active ());
}
_session.set_deletion_in_progress();
}
+ ProcessorList old_list = _processors;
{
Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
Glib::Threads::RWLock::WriterLock lm (_processor_lock);
seen_amp = true;
}
- if ((*i) == _amp || (*i) == _meter || (*i) == _main_outs || (*i) == _delayline || (*i) == _trim) {
+ if (is_internal_processor (*i)) {
/* you can't remove these */
_processors = new_list;
configure_processors_unlocked (&err, &lm); // this can't fail
}
+ /* drop references w/o process-lock (I/O procs may re-take it in ~IO() */
+ old_list.clear ();
processor_max_streams.reset();
_have_internal_generator = false;
- processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
+ reset_instrument_info ();
set_processor_positions ();
- reset_instrument_info ();
+ processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
if (!already_deleting) {
_session.clear_deletion_in_progress();
}
}
+bool
+Route::is_internal_processor (boost::shared_ptr<Processor> p) const
+{
+ if (p == _amp || p == _meter || p == _main_outs || p == _delayline || p == _trim || p == _polarity) {
+ return true;
+ }
+ return false;
+}
+
int
Route::remove_processor (boost::shared_ptr<Processor> processor, ProcessorStreams* err, bool need_process_lock)
{
/* these can never be removed */
- if (processor == _amp || processor == _meter || processor == _main_outs || processor == _delayline || processor == _trim) {
+ if (is_internal_processor (processor)) {
return 0;
}
Route::replace_processor (boost::shared_ptr<Processor> old, boost::shared_ptr<Processor> sub, ProcessorStreams* err)
{
/* these can never be removed */
- if (old == _amp || old == _meter || old == _main_outs || old == _delayline || old == _trim) {
+ if (is_internal_processor (old)) {
return 1;
}
/* and can't be used as substitute, either */
- if (sub == _amp || sub == _meter || sub == _main_outs || sub == _delayline || sub == _trim) {
+ if (is_internal_processor (sub)) {
return 1;
}
/* these can never be removed */
- if (processor == _amp || processor == _meter || processor == _main_outs || processor == _delayline || processor == _trim) {
+ if (is_internal_processor (processor)) {
++i;
continue;
}
if (is_monitor()) {
// restriction for Monitor Section Processors
if (in.n_audio() != out.n_audio() || out.n_midi() > 0) {
- /* do not allow to add/remove channels (for now)
- * The Monitor follows the master-bus and has no panner (unpan)
- * but do allow processors with midi-in to be added (e.g VSTs with control that
- * will remain unconnected)
+ /* Note: The Monitor follows the master-bus and has no panner.
+ *
+ * The general idea is to only allow plugins that retain the channel-count
+ * and plugins with MIDI in (e.g VSTs with control that will remain unconnected).
+ * Then again 5.1 in, monitor stereo is a valid use-case.
+ *
+ * and worse: we only refuse adding plugins *here*.
+ *
+ * 1) stereo-master, stereo-mon, add a stereo-plugin, OK
+ * 2) change master-bus, add a channel
+ * 2a) monitor-secion follows
+ * 3) monitor processors fail to re-reconfigure (stereo plugin)
+ * 4) re-load session, monitor-processor remains unconfigured, crash.
*/
- DEBUG_TRACE (DEBUG::Processors, "Monitor: Channel configuration not allowed.\n");
- return list<pair<ChanCount, ChanCount> > ();
+ DEBUG_TRACE (DEBUG::Processors, "Monitor: Channel configuration change.\n");
}
if (boost::dynamic_pointer_cast<InternalSend> (*p)) {
// internal sends make no sense, only feedback
lm->acquire ();
return -1;
}
+
processor_max_streams = ChanCount::max(processor_max_streams, c->first);
processor_max_streams = ChanCount::max(processor_max_streams, c->second);
if (!(*i)->display_to_user() || boost::dynamic_pointer_cast<Amp> (*i)) {
continue;
}
+#ifdef MIXBUS
+ boost::shared_ptr<PluginInsert> pi;
+ if (0 != (pi = boost::dynamic_pointer_cast<PluginInsert>(*i))) {
+ if (pi->is_channelstrip ()) {
+ continue;
+ }
+ }
+#endif
(*i)->enable (state);
}
maybe_note_meter_position ();
}
+void
+Route::move_instrument_down (bool postfader)
+{
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
+ ProcessorList new_order;
+ boost::shared_ptr<Processor> instrument;
+ for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
+ boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert>(*i);
+ if (pi && pi->plugin ()->get_info ()->is_instrument ()) {
+ instrument = *i;
+ } else if (instrument && *i == _amp) {
+ if (postfader) {
+ new_order.push_back (*i);
+ new_order.push_back (instrument);
+ } else {
+ new_order.push_back (instrument);
+ new_order.push_back (*i);
+ }
+ } else {
+ new_order.push_back (*i);
+ }
+ }
+ if (!instrument) {
+ return;
+ }
+ lm.release ();
+ reorder_processors (new_order, 0);
+}
+
int
Route::reorder_processors (const ProcessorList& new_order, ProcessorStreams* err)
{
g_atomic_int_set (&_pending_process_reorder, 1);
}
+ /* update processor input/output latency
+ * (total signal_latency does not change)
+ */
+ update_signal_latency (true);
+
return 0;
}
XMLNode&
Route::get_state()
{
- return state(true);
+ return state (false);
}
XMLNode&
Route::get_template()
{
- return state(false);
+ return state (true);
}
XMLNode&
-Route::state(bool full_state)
+Route::state (bool save_template)
{
- LocaleGuard lg;
if (!_session._template_state_dir.empty()) {
foreach_processor (sigc::bind (sigc::mem_fun (*this, &Route::set_plugin_state_dir), _session._template_state_dir));
}
XMLNode *node = new XMLNode("Route");
ProcessorList::iterator i;
- char buf[32];
- id().print (buf, sizeof (buf));
- node->add_property("id", buf);
- node->add_property ("name", _name);
- node->add_property("default-type", _default_type.to_string());
- node->add_property ("strict-io", _strict_io);
+ node->set_property (X_("id"), id ());
+ node->set_property (X_("name"), name());
+ node->set_property (X_("default-type"), _default_type);
+ node->set_property (X_("strict-io"), _strict_io);
node->add_child_nocopy (_presentation_info.get_state());
- node->add_property("active", _active?"yes":"no");
- string p;
- node->add_property("denormal-protection", _denormal_protection?"yes":"no");
- node->add_property("meter-point", enum_2_string (_meter_point));
+ node->set_property (X_("active"), _active);
+ node->set_property (X_("denormal-protection"), _denormal_protection);
+ node->set_property (X_("meter-point"), _meter_point);
+ node->set_property (X_("disk-io-point"), _disk_io_point);
- node->add_property("meter-type", enum_2_string (_meter_type));
+ node->set_property (X_("meter-type"), _meter_type);
if (_route_group) {
- node->add_property("route-group", _route_group->name());
+ node->set_property (X_("route-group"), _route_group->name());
}
node->add_child_nocopy (_solo_control->get_state ());
node->add_child_nocopy (_solo_isolate_control->get_state ());
node->add_child_nocopy (_solo_safe_control->get_state ());
- node->add_child_nocopy (_input->state (full_state));
- node->add_child_nocopy (_output->state (full_state));
+ node->add_child_nocopy (_input->get_state ());
+ node->add_child_nocopy (_output->get_state ());
node->add_child_nocopy (_mute_master->get_state ());
node->add_child_nocopy (_mute_control->get_state ());
node->add_child_nocopy (_phase_control->get_state ());
- if (full_state) {
+ if (!skip_saving_automation) {
node->add_child_nocopy (Automatable::get_automation_xml_state ());
}
}
if (_pannable) {
- node->add_child_nocopy (_pannable->state (full_state));
+ node->add_child_nocopy (_pannable->get_state ());
}
{
Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
for (i = _processors.begin(); i != _processors.end(); ++i) {
- if (!full_state) {
+ if (*i == _delayline) {
+ continue;
+ }
+ if (save_template) {
/* template save: do not include internal sends functioning as
aux sends because the chance of the target ID
in the session where this template is used
}
}
}
- node->add_child_nocopy((*i)->state (full_state));
+ node->add_child_nocopy((*i)->get_state ());
}
}
if (_custom_meter_position_noted) {
boost::shared_ptr<Processor> after = _processor_after_last_custom_meter.lock ();
if (after) {
- after->id().print (buf, sizeof (buf));
- node->add_property (X_("processor-after-last-custom-meter"), buf);
+ node->set_property (X_("processor-after-last-custom-meter"), after->id());
}
}
XMLNodeList nlist;
XMLNodeConstIterator niter;
XMLNode *child;
- XMLProperty const * prop;
if (node.name() != "Route"){
error << string_compose(_("Bad node sent to Route::set_state() [%1]"), node.name()) << endmsg;
return -1;
}
- if ((prop = node.property (X_("name"))) != 0) {
- Route::set_name (prop->value());
+ std::string route_name;
+ if (node.get_property (X_("name"), route_name)) {
+ Route::set_name (route_name);
}
set_id (node);
Stripable::set_state (node, version);
- if ((prop = node.property (X_("strict-io"))) != 0) {
- _strict_io = string_is_affirmative (prop->value());
- }
+ node.get_property (X_("strict-io"), _strict_io);
if (is_monitor()) {
/* monitor bus does not get a panner, but if (re)created
child = *niter;
if (child->name() == IO::state_node_name) {
- if ((prop = child->property (X_("direction"))) == 0) {
+ std::string direction;
+ if (!child->get_property (X_("direction"), direction)) {
continue;
}
- if (prop->value() == "Input") {
+ if (direction == "Input") {
_input->set_state (*child, version);
- } else if (prop->value() == "Output") {
+ } else if (direction == "Output") {
_output->set_state (*child, version);
}
}
}
- if ((prop = node.property (X_("meter-point"))) != 0) {
- MeterPoint mp = MeterPoint (string_2_enum (prop->value (), _meter_point));
+ MeterPoint mp;
+ if (node.get_property (X_("meter-point"), mp)) {
set_meter_point (mp, true);
if (_meter) {
_meter->set_display_to_user (_meter_point == MeterCustom);
}
}
- if ((prop = node.property (X_("meter-type"))) != 0) {
- _meter_type = MeterType (string_2_enum (prop->value (), _meter_type));
+ DiskIOPoint diop;
+ if (node.get_property (X_("disk-io-point"), diop)) {
+ if (_disk_writer) {
+ _disk_writer->set_display_to_user (diop == DiskIOCustom);
+ }
+ if (_disk_reader) {
+ _disk_reader->set_display_to_user (diop == DiskIOCustom);
+ }
+ set_disk_io_point (diop);
}
+ node.get_property (X_("meter-type"), _meter_type);
+
_initial_io_setup = false;
set_processor_state (processor_state);
// this looks up the internal instrument in processors
reset_instrument_info();
- if ((prop = node.property (X_("denormal-protection"))) != 0) {
- set_denormal_protection (string_is_affirmative (prop->value()));
+ bool denormal_protection;
+ if (node.get_property (X_("denormal-protection"), denormal_protection)) {
+ set_denormal_protection (denormal_protection);
+ }
+
+ /* convert old 3001 state */
+ std::string phase_invert_str;
+ if (node.get_property (X_("phase-invert"), phase_invert_str)) {
+ _phase_control->set_phase_invert (boost::dynamic_bitset<> (phase_invert_str));
}
- if ((prop = node.property (X_("active"))) != 0) {
- bool yn = string_is_affirmative (prop->value());
- set_active (yn, this);
+ bool is_active;
+ if (node.get_property (X_("active"), is_active)) {
+ set_active (is_active, this);
}
- if ((prop = node.property (X_("processor-after-last-custom-meter"))) != 0) {
- PBD::ID id (prop->value ());
+ std::string id_string;
+ if (node.get_property (X_("processor-after-last-custom-meter"), id_string)) {
+ PBD::ID id (id_string);
Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
ProcessorList::const_iterator i = _processors.begin ();
while (i != _processors.end() && (*i)->id() != id) {
_comment = cmt->content();
} else if (child->name() == Controllable::xml_node_name) {
- if ((prop = child->property (X_("name"))) == 0) {
+ std::string control_name;
+ if (!child->get_property (X_("name"), control_name)) {
continue;
}
- if (prop->value() == _gain_control->name()) {
- _gain_control->set_state (*child, version);
- } else if (prop->value() == _solo_control->name()) {
+ if (control_name == _solo_control->name()) {
_solo_control->set_state (*child, version);
- } else if (prop->value() == _solo_safe_control->name()) {
+ } else if (control_name == _solo_safe_control->name()) {
_solo_safe_control->set_state (*child, version);
- } else if (prop->value() == _solo_isolate_control->name()) {
+ } else if (control_name == _solo_isolate_control->name()) {
_solo_isolate_control->set_state (*child, version);
- } else if (prop->value() == _mute_control->name()) {
+ } else if (control_name == _mute_control->name()) {
_mute_control->set_state (*child, version);
- } else if (prop->value() == _phase_control->name()) {
+ } else if (control_name == _phase_control->name()) {
_phase_control->set_state (*child, version);
} else {
- Evoral::Parameter p = EventTypeMap::instance().from_symbol (prop->value());
+ Evoral::Parameter p = EventTypeMap::instance().from_symbol (control_name);
if (p.type () >= MidiCCAutomation && p.type () < MidiSystemExclusiveAutomation) {
boost::shared_ptr<AutomationControl> ac = automation_control (p, true);
if (ac) {
}
}
+ if (_delayline) {
+ _delayline->set_name (name ());
+ }
+
return 0;
}
Stripable::set_state (node, version);
if ((prop = node.property (X_("denormal-protection"))) != 0) {
- set_denormal_protection (string_is_affirmative (prop->value()));
+ set_denormal_protection (string_to<bool> (prop->value()));
}
if ((prop = node.property (X_("muted"))) != 0) {
bool first = true;
- bool muted = string_is_affirmative (prop->value());
+ bool muted = string_to<bool> (prop->value());
if (muted) {
if ((prop = node.property (X_("mute-affects-pre-fader"))) != 0) {
- if (string_is_affirmative (prop->value())){
+ if (string_to<bool> (prop->value())){
mute_point = mute_point + "PreFader";
first = false;
}
if ((prop = node.property (X_("mute-affects-post-fader"))) != 0) {
- if (string_is_affirmative (prop->value())){
+ if (string_to<bool> (prop->value())){
if (!first) {
mute_point = mute_point + ",";
if ((prop = node.property (X_("mute-affects-control-outs"))) != 0) {
- if (string_is_affirmative (prop->value())){
+ if (string_to<bool> (prop->value())){
if (!first) {
mute_point = mute_point + ",";
if ((prop = node.property (X_("mute-affects-main-outs"))) != 0) {
- if (string_is_affirmative (prop->value())){
+ if (string_to<bool> (prop->value())){
if (!first) {
mute_point = mute_point + ",";
set_id (*child);
if ((prop = child->property (X_("active"))) != 0) {
- bool yn = string_is_affirmative (prop->value());
+ bool yn = string_to<bool> (prop->value());
_active = !yn; // force switch
set_active (yn, this);
}
{
XMLNode* root = new XMLNode (X_("redirects"));
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- root->add_child_nocopy ((*i)->state (true));
+ root->add_child_nocopy ((*i)->get_state ());
}
return *root;
} else if (prop->value() == "meter") {
_meter->set_state (**niter, Stateful::current_state_version);
new_order.push_back (_meter);
+ } else if (prop->value() == "polarity") {
+ _polarity->set_state (**niter, Stateful::current_state_version);
+ new_order.push_back (_polarity);
} else if (prop->value() == "delay") {
- if (_delayline) {
- _delayline->set_state (**niter, Stateful::current_state_version);
- new_order.push_back (_delayline);
- }
+ // skip -- internal
} else if (prop->value() == "main-outs") {
_main_outs->set_state (**niter, Stateful::current_state_version);
} else if (prop->value() == "intreturn") {
} else if (prop->value() == "capture") {
/* CapturingProcessor should never be restored, it's always
added explicitly when needed */
+ } else if (prop->value() == "diskreader" && _disk_reader) {
+ _disk_reader->set_state (**niter, Stateful::current_state_version);
+ new_order.push_back (_disk_reader);
+ } else if (prop->value() == "diskwriter" && _disk_writer) {
+ _disk_writer->set_state (**niter, Stateful::current_state_version);
+ new_order.push_back (_disk_writer);
} else {
- ProcessorList::iterator o;
-
- for (o = _processors.begin(); o != _processors.end(); ++o) {
- XMLProperty const * id_prop = (*niter)->property(X_("id"));
- if (id_prop && (*o)->id() == id_prop->value()) {
- (*o)->set_state (**niter, Stateful::current_state_version);
- new_order.push_back (*o);
- break;
- }
- }
-
- // If the processor (*niter) is not on the route then create it
-
- if (o == _processors.end()) {
-
- boost::shared_ptr<Processor> processor;
-
- if (prop->value() == "intsend") {
-
- processor.reset (new InternalSend (_session, _pannable, _mute_master, boost::dynamic_pointer_cast<ARDOUR::Route>(shared_from_this()), boost::shared_ptr<Route>(), Delivery::Aux, true));
-
- } else if (prop->value() == "ladspa" || prop->value() == "Ladspa" ||
- prop->value() == "lv2" ||
- prop->value() == "windows-vst" ||
- prop->value() == "mac-vst" ||
- prop->value() == "lxvst" ||
- prop->value() == "luaproc" ||
- prop->value() == "audiounit") {
-
- if (_session.get_disable_all_loaded_plugins ()) {
- processor.reset (new UnknownProcessor (_session, **niter));
- } else {
- processor.reset (new PluginInsert (_session));
- processor->set_owner (this);
- if (_strict_io) {
- boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert>(processor);
- pi->set_strict_io (true);
- }
-
- }
- } else if (prop->value() == "port") {
-
- processor.reset (new PortInsert (_session, _pannable, _mute_master));
-
- } else if (prop->value() == "send") {
-
- processor.reset (new Send (_session, _pannable, _mute_master, Delivery::Send, true));
- boost::shared_ptr<Send> send = boost::dynamic_pointer_cast<Send> (processor);
- send->SelfDestruct.connect_same_thread (*this,
- boost::bind (&Route::processor_selfdestruct, this, boost::weak_ptr<Processor> (processor)));
-
- } else {
- error << string_compose(_("unknown Processor type \"%1\"; ignored"), prop->value()) << endmsg;
- continue;
- }
-
- if (processor->set_state (**niter, Stateful::current_state_version) != 0) {
- /* This processor could not be configured. Turn it into a UnknownProcessor */
- processor.reset (new UnknownProcessor (_session, **niter));
- }
-
- /* subscribe to Sidechain IO changes */
- boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert> (processor);
- if (pi && pi->has_sidechain ()) {
- pi->sidechain_input ()->changed.connect_same_thread (*this, boost::bind (&Route::sidechain_change_handler, this, _1, _2));
- }
-
- /* we have to note the monitor send here, otherwise a new one will be created
- and the state of this one will be lost.
- */
- boost::shared_ptr<InternalSend> isend = boost::dynamic_pointer_cast<InternalSend> (processor);
- if (isend && isend->role() == Delivery::Listen) {
- _monitor_send = isend;
- }
-
- /* it doesn't matter if invisible processors are added here, as they
- will be sorted out by setup_invisible_processors () shortly.
- */
-
- new_order.push_back (processor);
- must_configure = true;
- }
+ set_processor_state (**niter, prop, new_order, must_configure);
}
}
+ ProcessorList old_list = _processors; // keep a copy
{
Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
Glib::Threads::RWLock::WriterLock lm (_processor_lock);
}
}
}
+ /* drop references w/o process-lock (I/O procs may re-take it in ~IO() */
+ old_list.clear ();
reset_instrument_info ();
processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
set_processor_positions ();
}
+bool
+Route::set_processor_state (XMLNode const & node, XMLProperty const* prop, ProcessorList& new_order, bool& must_configure)
+{
+ ProcessorList::iterator o;
+
+ for (o = _processors.begin(); o != _processors.end(); ++o) {
+ XMLProperty const * id_prop = node.property(X_("id"));
+ if (id_prop && (*o)->id() == id_prop->value()) {
+ (*o)->set_state (node, Stateful::current_state_version);
+ new_order.push_back (*o);
+ break;
+ }
+ }
+
+ // If the processor (node) is not on the route then create it
+
+ if (o == _processors.end()) {
+
+ boost::shared_ptr<Processor> processor;
+
+ if (prop->value() == "intsend") {
+
+ processor.reset (new InternalSend (_session, _pannable, _mute_master, boost::dynamic_pointer_cast<ARDOUR::Route>(shared_from_this()), boost::shared_ptr<Route>(), Delivery::Aux, true));
+
+ } else if (prop->value() == "ladspa" || prop->value() == "Ladspa" ||
+ prop->value() == "lv2" ||
+ prop->value() == "windows-vst" ||
+ prop->value() == "mac-vst" ||
+ prop->value() == "lxvst" ||
+ prop->value() == "luaproc" ||
+ prop->value() == "audiounit") {
+
+ if (_session.get_disable_all_loaded_plugins ()) {
+ processor.reset (new UnknownProcessor (_session, node));
+ } else {
+ processor.reset (new PluginInsert (_session));
+ processor->set_owner (this);
+ if (_strict_io) {
+ boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert>(processor);
+ pi->set_strict_io (true);
+ }
+
+ }
+ } else if (prop->value() == "port") {
+
+ processor.reset (new PortInsert (_session, _pannable, _mute_master));
+
+ } else if (prop->value() == "send") {
+
+ processor.reset (new Send (_session, _pannable, _mute_master, Delivery::Send, true));
+ boost::shared_ptr<Send> send = boost::dynamic_pointer_cast<Send> (processor);
+ send->SelfDestruct.connect_same_thread (*this,
+ boost::bind (&Route::processor_selfdestruct, this, boost::weak_ptr<Processor> (processor)));
+
+ } else {
+ return false;
+ }
+
+ if (processor->set_state (node, Stateful::current_state_version) != 0) {
+ /* This processor could not be configured. Turn it into a UnknownProcessor */
+ processor.reset (new UnknownProcessor (_session, node));
+ }
+
+ /* subscribe to Sidechain IO changes */
+ boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert> (processor);
+ if (pi && pi->has_sidechain ()) {
+ pi->sidechain_input ()->changed.connect_same_thread (*this, boost::bind (&Route::sidechain_change_handler, this, _1, _2));
+ }
+
+ /* we have to note the monitor send here, otherwise a new one will be created
+ and the state of this one will be lost.
+ */
+ boost::shared_ptr<InternalSend> isend = boost::dynamic_pointer_cast<InternalSend> (processor);
+ if (isend && isend->role() == Delivery::Listen) {
+ _monitor_send = isend;
+ }
+
+ /* it doesn't matter if invisible processors are added here, as they
+ will be sorted out by setup_invisible_processors () shortly.
+ */
+
+ new_order.push_back (processor);
+ must_configure = true;
+ }
+ return true;
+}
+
void
Route::curve_reallocate ()
{
}
void
-Route::silence (framecnt_t nframes)
+Route::silence (samplecnt_t nframes)
{
Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
if (!lm.locked()) {
}
void
-Route::silence_unlocked (framecnt_t nframes)
+Route::silence_unlocked (samplecnt_t nframes)
{
/* Must be called with the processor lock held */
- const framepos_t now = _session.transport_frame ();
-
- if (!_silent) {
+ const samplepos_t now = _session.transport_sample ();
- _output->silence (nframes);
+ _output->silence (nframes);
- for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- boost::shared_ptr<PluginInsert> pi;
+ // update owned automated controllables
+ automation_run (now, nframes);
+ if (_pannable) {
+ _pannable->automation_run (now, nframes);
+ }
- if (!_active && (pi = boost::dynamic_pointer_cast<PluginInsert> (*i)) != 0) {
- // skip plugins, they don't need anything when we're not active
- continue;
- }
+ for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
+ boost::shared_ptr<PluginInsert> pi;
- (*i)->silence (nframes, now);
+ if (!_active && (pi = boost::dynamic_pointer_cast<PluginInsert> (*i)) != 0) {
+ /* evaluate automated automation controls */
+ pi->automation_run (now, nframes);
+ /* skip plugins, they don't need anything when we're not active */
+ continue;
}
- if (nframes == _session.get_block_size()) {
- // _silent = true;
- }
+ (*i)->silence (nframes, now);
}
}
bool
Route::direct_feeds_according_to_graph (boost::shared_ptr<Route> other, bool* via_send_only)
{
- return _session._current_route_graph.has (shared_from_this (), other, via_send_only);
+ return _session._current_route_graph.has (boost::dynamic_pointer_cast<Route> (shared_from_this ()), other, via_send_only);
}
bool
Route::feeds_according_to_graph (boost::shared_ptr<Route> other)
{
- return _session._current_route_graph.feeds (shared_from_this (), other);
+ return _session._current_route_graph.feeds (boost::dynamic_pointer_cast<Route> (shared_from_this ()), other);
}
/** Called from the (non-realtime) butler thread when the transport is stopped */
void
-Route::nonrealtime_handle_transport_stopped (bool /*abort_ignored*/, bool /*did_locate*/, bool can_flush_processors)
+Route::non_realtime_transport_stop (samplepos_t now, bool flush)
{
- framepos_t now = _session.transport_frame();
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
- {
- Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
+ Automatable::non_realtime_transport_stop (now, flush);
- Automatable::transport_stopped (now);
+ for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
-
- if (!_have_internal_generator && (Config->get_plugins_stop_with_transport() && can_flush_processors)) {
- (*i)->flush ();
- }
-
- (*i)->transport_stopped (now);
+ if (!_have_internal_generator && (Config->get_plugins_stop_with_transport() && flush)) {
+ (*i)->flush ();
}
- }
- _roll_delay = _initial_delay;
+ (*i)->non_realtime_transport_stop (now, flush);
+ }
}
void
contains ConfigurationChanged
*/
configure_processors (0);
- _phase_control->resize (_input->n_ports().n_audio ());
io_changed (); /* EMIT SIGNAL */
}
continue;
}
bool sends_only;
- bool does_feed = (*i)->direct_feeds_according_to_reality (shared_from_this(), &sends_only);
+ bool does_feed = (*i)->direct_feeds_according_to_reality (boost::dynamic_pointer_cast<Route> (shared_from_this()), &sends_only);
if (does_feed && !sends_only) {
if ((*i)->soloed()) {
++sbou;
io_changed (); /* EMIT SIGNAL */
}
- if (_solo_control->soloed_by_others_downstream()) {
- int sbod = 0;
- /* checking all all downstream routes for
- * explicit of implict solo is a rather drastic measure,
- * ideally the input_change_handler() of the other route
- * would propagate the change to us.
+ if ((change.type & IOChange::ConnectionsChanged)) {
+
+ /* do this ONLY if connections have changed. Configuration
+ * changes do not, by themselves alter solo upstream or
+ * downstream status.
*/
- boost::shared_ptr<RouteList> routes = _session.get_routes ();
- if (_output->connected()) {
- for (RouteList::iterator i = routes->begin(); i != routes->end(); ++i) {
- if ((*i).get() == this || (*i)->is_master() || (*i)->is_monitor() || (*i)->is_auditioner()) {
- continue;
- }
- bool sends_only;
- bool does_feed = direct_feeds_according_to_reality (*i, &sends_only);
- if (does_feed && !sends_only) {
- if ((*i)->soloed()) {
- ++sbod;
- break;
+
+ if (_solo_control->soloed_by_others_downstream()) {
+ int sbod = 0;
+ /* checking all all downstream routes for
+ * explicit of implict solo is a rather drastic measure,
+ * ideally the input_change_handler() of the other route
+ * would propagate the change to us.
+ */
+ boost::shared_ptr<RouteList> routes = _session.get_routes ();
+ if (_output->connected()) {
+ for (RouteList::iterator i = routes->begin(); i != routes->end(); ++i) {
+ if ((*i).get() == this || (*i)->is_master() || (*i)->is_monitor() || (*i)->is_auditioner()) {
+ continue;
+ }
+ bool sends_only;
+ bool does_feed = direct_feeds_according_to_reality (*i, &sends_only);
+ if (does_feed && !sends_only) {
+ if ((*i)->soloed()) {
+ ++sbod;
+ break;
+ }
}
}
}
- }
- int delta = sbod - _solo_control->soloed_by_others_downstream();
- if (delta <= 0) {
- // do not allow new connections to change implicit solo (no propagation)
- _solo_control->mod_solo_by_others_downstream (delta);
- // Session::route_solo_changed() does not propagate indirect solo-changes
- // propagate upstream to tracks
- for (RouteList::iterator i = routes->begin(); i != routes->end(); ++i) {
- if ((*i).get() == this || !can_solo()) {
- continue;
- }
- bool sends_only;
- bool does_feed = (*i)->feeds (shared_from_this(), &sends_only);
- if (delta != 0 && does_feed && !sends_only) {
- (*i)->solo_control()->mod_solo_by_others_downstream (delta);
+
+ int delta = sbod - _solo_control->soloed_by_others_downstream();
+ if (delta <= 0) {
+ // do not allow new connections to change implicit solo (no propagation)
+ _solo_control->mod_solo_by_others_downstream (delta);
+ // Session::route_solo_changed() does not propagate indirect solo-changes
+ // propagate upstream to tracks
+ boost::shared_ptr<Route> shared_this = boost::dynamic_pointer_cast<Route> (shared_from_this());
+ for (RouteList::iterator i = routes->begin(); i != routes->end(); ++i) {
+ if ((*i).get() == this || !can_solo()) {
+ continue;
+ }
+ bool sends_only;
+ bool does_feed = (*i)->feeds (shared_this, &sends_only);
+ if (delta != 0 && does_feed && !sends_only) {
+ (*i)->solo_control()->mod_solo_by_others_downstream (delta);
+ }
}
- }
+ }
}
}
}
}
void
-Route::flush_processor_buffers_locked (framecnt_t nframes)
+Route::flush_processor_buffers_locked (samplecnt_t nframes)
{
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
boost::shared_ptr<Delivery> d = boost::dynamic_pointer_cast<Delivery> (*i);
}
}
-int
-Route::no_roll (pframes_t nframes, framepos_t start_frame, framepos_t end_frame, bool session_state_changing)
+void
+Route::flush_processors ()
{
- Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
- if (!lm.locked()) {
- return 0;
+ for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
+ (*i)->flush ();
}
+}
- if (n_outputs().n_total() == 0) {
- return 0;
+samplecnt_t
+Route::playback_latency (bool incl_downstream) const
+{
+ samplecnt_t rv;
+ if (_disk_reader) {
+ rv = _disk_reader->output_latency ();
+ } else {
+ rv = _signal_latency;
}
-
- if (!_active || n_inputs() == ChanCount::ZERO) {
- silence_unlocked (nframes);
- return 0;
+ if (incl_downstream) {
+ rv += _output->connected_latency (true);
+ } else {
+ rv += _output->latency ();
}
+ return rv;
+}
- if (session_state_changing) {
- if (_session.transport_speed() != 0.0f) {
- /* we're rolling but some state is changing (e.g. our diskstream contents)
- so we cannot use them. Be silent till this is over.
-
- XXX note the absurdity of ::no_roll() being called when we ARE rolling!
- */
- silence_unlocked (nframes);
- return 0;
- }
- /* we're really not rolling, so we're either delivery silence or actually
- monitoring, both of which are safe to do while session_state_changing is true.
- */
+pframes_t
+Route::latency_preroll (pframes_t nframes, samplepos_t& start_sample, samplepos_t& end_sample)
+{
+ samplecnt_t latency_preroll = _session.remaining_latency_preroll ();
+ if (latency_preroll == 0) {
+ return nframes;
}
-
- BufferSet& bufs = _session.get_route_buffers (n_process_buffers());
-
- fill_buffers_with_input (bufs, _input, nframes);
-
- if (_meter_point == MeterInput) {
- _meter->run (bufs, start_frame, end_frame, 0.0, nframes, true);
+ if (!_disk_reader) {
+ start_sample -= latency_preroll;
+ end_sample -= latency_preroll;
+ return nframes;
}
- _amp->apply_gain_automation (false);
- _trim->apply_gain_automation (false);
- passthru (bufs, start_frame, end_frame, nframes, 0);
-
- flush_processor_buffers_locked (nframes);
+ if (latency_preroll > playback_latency ()) {
+ no_roll_unlocked (nframes, start_sample - latency_preroll, end_sample - latency_preroll, false);
+ return 0;
+ }
- return 0;
+ start_sample -= latency_preroll;
+ end_sample -= latency_preroll;
+ return nframes;
}
int
-Route::roll (pframes_t nframes, framepos_t start_frame, framepos_t end_frame, int declick, bool& /* need_butler */)
+Route::roll (pframes_t nframes, samplepos_t start_sample, samplepos_t end_sample, int declick, bool& need_butler)
{
Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
+
if (!lm.locked()) {
return 0;
}
- if (n_outputs().n_total() == 0) {
+ if (!_active) {
+ silence_unlocked (nframes);
+ _meter->reset();
return 0;
}
- if (!_active || n_inputs().n_total() == 0) {
- silence_unlocked (nframes);
+ if ((nframes = latency_preroll (nframes, start_sample, end_sample)) == 0) {
return 0;
}
- framepos_t unused = 0;
+ run_route (start_sample, end_sample, nframes, declick, (!_disk_writer || !_disk_writer->record_enabled()) && _session.transport_rolling(), true);
- if ((nframes = check_initial_delay (nframes, unused)) == 0) {
- return 0;
+ if ((_disk_reader && _disk_reader->need_butler()) || (_disk_writer && _disk_writer->need_butler())) {
+ need_butler = true;
}
+ return 0;
+}
- _silent = false;
+int
+Route::no_roll (pframes_t nframes, samplepos_t start_sample, samplepos_t end_sample, bool session_state_changing)
+{
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
- BufferSet& bufs = _session.get_route_buffers (n_process_buffers());
+ if (!lm.locked()) {
+ return 0;
+ }
- fill_buffers_with_input (bufs, _input, nframes);
+ return no_roll_unlocked (nframes, start_sample, end_sample, session_state_changing);
+}
- if (_meter_point == MeterInput) {
- _meter->run (bufs, start_frame, end_frame, 1.0, nframes, true);
+int
+Route::no_roll_unlocked (pframes_t nframes, samplepos_t start_sample, samplepos_t end_sample, bool session_state_changing)
+{
+ /* Must be called with the processor lock held */
+
+ if (!_active) {
+ silence_unlocked (nframes);
+ _meter->reset();
+ return 0;
}
- passthru (bufs, start_frame, end_frame, nframes, declick);
+ if (session_state_changing) {
+ if (_session.transport_speed() != 0.0f) {
+ /* we're rolling but some state is changing (e.g. our diskstream contents)
+ so we cannot use them. Be silent till this is over.
- flush_processor_buffers_locked (nframes);
+ XXX note the absurdity of ::no_roll() being called when we ARE rolling!
+ */
+ silence_unlocked (nframes);
+ _meter->reset();
+ return 0;
+ }
+ /* we're really not rolling, so we're either delivery silence or actually
+ monitoring, both of which are safe to do while session_state_changing is true.
+ */
+ }
+ run_route (start_sample, end_sample, nframes, 0, false, false);
return 0;
}
int
-Route::silent_roll (pframes_t nframes, framepos_t /*start_frame*/, framepos_t /*end_frame*/, bool& /* need_butler */)
+Route::silent_roll (pframes_t nframes, samplepos_t /*start_sample*/, samplepos_t /*end_sample*/, bool& /* need_butler */)
{
silence (nframes);
flush_processor_buffers_locked (nframes);
return 0;
}
-void
-Route::flush_processors ()
-{
- /* XXX shouldn't really try to take this lock, since
- this is called from the RT audio thread.
- */
-
- Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
-
- for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- (*i)->flush ();
- }
-}
-
#ifdef __clang__
__attribute__((annotate("realtime")))
#endif
}
if (changed) {
set_processor_positions ();
+ /* update processor input/output latency
+ * (total signal_latency does not change)
+ */
+ update_signal_latency (true);
}
if (emissions != 0) {
g_atomic_int_set (&_pending_signals, emissions);
Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
Glib::Threads::RWLock::WriterLock lw (_processor_lock);
- // this aligns all tracks; but not tracks + busses
- assert (_session.worst_track_latency () >= _initial_delay);
- _capturing_processor.reset (new CapturingProcessor (_session, _session.worst_track_latency () - _initial_delay));
- _capturing_processor->activate ();
-
+ /* Align all tracks for stem-export w/o processing.
+ * Compensate for all plugins between the this route's disk-reader
+ * and the common final downstream output (ie alignment point for playback).
+ */
+ _capturing_processor.reset (new CapturingProcessor (_session, playback_latency (true)));
configure_processors_unlocked (0, &lw);
-
+ _capturing_processor->activate ();
}
return _capturing_processor;
}
-framecnt_t
-Route::update_signal_latency ()
+samplecnt_t
+Route::update_signal_latency (bool apply_to_delayline)
{
- framecnt_t l = _output->user_latency();
- framecnt_t lamp = 0;
- bool before_amp = true;
- framecnt_t ltrim = 0;
- bool before_trim = true;
+ // TODO: bail out if !active() and set/assume _signal_latency = 0,
+ // here or in Session::* ? -> also zero send latencies,
+ // and make sure that re-enabling a route updates things again...
- for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- if ((*i)->active ()) {
- l += (*i)->signal_latency ();
+ samplecnt_t capt_lat_in = _input->connected_latency (false);
+ samplecnt_t play_lat_out = _output->connected_latency (true);
+
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
+
+ samplecnt_t l_in = 0;
+ samplecnt_t l_out = _output->user_latency();
+ for (ProcessorList::reverse_iterator i = _processors.rbegin(); i != _processors.rend(); ++i) {
+ if (boost::shared_ptr<Send> snd = boost::dynamic_pointer_cast<Send> (*i)) {
+ snd->set_delay_in (l_out + _output->latency());
}
- if ((*i) == _amp) {
- before_amp = false;
+
+ if (boost::shared_ptr<PluginInsert> pi = boost::dynamic_pointer_cast<PluginInsert> (*i)) {
+ if (boost::shared_ptr<IO> pio = pi->sidechain_input ()) {
+ samplecnt_t lat = l_out + _output->latency();
+ pio->set_private_port_latencies (lat, true);
+ pio->set_public_port_latencies (lat, true);
+ }
}
- if ((*i) == _trim) {
- before_amp = false;
+ (*i)->set_output_latency (l_out);
+ if ((*i)->active ()) {
+ l_out += (*i)->signal_latency ();
}
- if (before_amp) {
- lamp = l;
+ }
+
+ DEBUG_TRACE (DEBUG::Latency, string_compose ("%1: internal signal latency = %2\n", _name, l_out));
+
+ _signal_latency = l_out;
+
+ for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
+
+ /* set sidechain, send and insert port latencies */
+ if (boost::shared_ptr<PortInsert> pi = boost::dynamic_pointer_cast<PortInsert> (*i)) {
+ if (pi->input ()) {
+ /* propagate playback latency from output to input */
+ pi->input ()->set_private_port_latencies (play_lat_out + l_in, true);
+ }
+ if (pi->output ()) {
+ /* propagate capture latency from input to output */
+ pi->output ()->set_private_port_latencies (capt_lat_in + l_in, false);
+ }
+
+ } else if (boost::shared_ptr<Send> snd = boost::dynamic_pointer_cast<Send> (*i)) {
+ if (snd->output ()) {
+ /* set capture latency */
+ snd->output ()->set_private_port_latencies (capt_lat_in + l_in, false);
+ /* take send-target's playback latency into account */
+ snd->set_delay_out (snd->output ()->connected_latency (true));
+ }
}
- if (before_trim) {
- lamp = l;
+
+ (*i)->set_input_latency (l_in);
+ (*i)->set_playback_offset (_signal_latency + _output->latency ());
+ (*i)->set_capture_offset (_input->latency ());
+ if ((*i)->active ()) {
+ l_in += (*i)->signal_latency ();
}
}
- DEBUG_TRACE (DEBUG::Latency, string_compose ("%1: internal signal latency = %2\n", _name, l));
+ lm.release ();
- // TODO: (lamp - _signal_latency) to sync to output (read-ahed), currently _roll_delay shifts this around
- _signal_latency_at_amp_position = lamp;
- _signal_latency_at_trim_position = ltrim;
+ if (apply_to_delayline) {
+ /* see also Session::post_playback_latency() */
+ apply_latency_compensation ();
+ }
- if (_signal_latency != l) {
- _signal_latency = l;
+ if (_signal_latency != l_out) {
signal_latency_changed (); /* EMIT SIGNAL */
}
}
void
-Route::set_user_latency (framecnt_t nframes)
+Route::set_user_latency (samplecnt_t nframes)
{
_output->set_user_latency (nframes);
_session.update_latency_compensation ();
}
void
-Route::set_latency_compensation (framecnt_t longest_session_latency)
+Route::apply_latency_compensation ()
{
- framecnt_t old = _initial_delay;
+ if (_delayline) {
+ samplecnt_t old = _delayline->delay ();
- if (_signal_latency < longest_session_latency) {
- _initial_delay = longest_session_latency - _signal_latency;
- } else {
- _initial_delay = 0;
- }
+ samplecnt_t play_lat_in = _input->connected_latency (true);
+ samplecnt_t play_lat_out = _output->connected_latency (true);
+ samplecnt_t latcomp = play_lat_in - play_lat_out - _signal_latency;
- DEBUG_TRACE (DEBUG::Latency, string_compose (
- "%1: compensate for maximum latency of %2,"
- "given own latency of %3, using initial delay of %4\n",
- name(), longest_session_latency, _signal_latency, _initial_delay));
+#if 0 // DEBUG
+ samplecnt_t capt_lat_in = _input->connected_latency (false);
+ samplecnt_t capt_lat_out = _output->connected_latency (false);
+ samplecnt_t latcomp_capt = capt_lat_out - capt_lat_in - _signal_latency;
- if (_initial_delay != old) {
- initial_delay_changed (); /* EMIT SIGNAL */
- }
+ cout << "ROUTE " << name() << " delay for " << latcomp << " (c: " << latcomp_capt << ")" << endl;
+#endif
- if (_session.transport_stopped()) {
- _roll_delay = _initial_delay;
+ _delayline->set_delay (latcomp > 0 ? latcomp : 0);
+
+ if (old != _delayline->delay ()) {
+ signal_latency_updated (); /* EMIT SIGNAL */
+ }
}
}
* Adds undo commands for any shifts that are performed.
*
* @param pos Position to start shifting from.
- * @param frames Amount to shift forwards by.
+ * @param samples Amount to shift forwards by.
*/
void
-Route::shift (framepos_t pos, framecnt_t frames)
+Route::shift (samplepos_t pos, samplecnt_t samples)
{
/* gain automation */
{
boost::shared_ptr<AutomationControl> gc = _amp->gain_control();
XMLNode &before = gc->alist()->get_state ();
- gc->alist()->shift (pos, frames);
+ gc->alist()->shift (pos, samples);
XMLNode &after = gc->alist()->get_state ();
_session.add_command (new MementoCommand<AutomationList> (*gc->alist().get(), &before, &after));
}
boost::shared_ptr<AutomationControl> gc = _trim->gain_control();
XMLNode &before = gc->alist()->get_state ();
- gc->alist()->shift (pos, frames);
+ gc->alist()->shift (pos, samples);
XMLNode &after = gc->alist()->get_state ();
_session.add_command (new MementoCommand<AutomationList> (*gc->alist().get(), &before, &after));
}
if (pc) {
boost::shared_ptr<AutomationList> al = pc->alist();
XMLNode& before = al->get_state ();
- al->shift (pos, frames);
+ al->shift (pos, samples);
XMLNode& after = al->get_state ();
_session.add_command (new MementoCommand<AutomationList> (*al.get(), &before, &after));
}
if (ac) {
boost::shared_ptr<AutomationList> al = ac->alist();
XMLNode &before = al->get_state ();
- al->shift (pos, frames);
+ al->shift (pos, samples);
XMLNode &after = al->get_state ();
_session.add_command (new MementoCommand<AutomationList> (*al.get(), &before, &after));
}
}
int
-Route::save_as_template (const string& path, const string& name)
+Route::save_as_template (const string& path, const string& name, const string& description)
{
std::string state_dir = path.substr (0, path.find_last_of ('.')); // strip template_suffix
PBD::Unwinder<std::string> uw (_session._template_state_dir, state_dir);
XMLNode& node (state (false));
+ node.set_property (X_("name"), name);
+
+ node.remove_nodes (X_("description"));
+ if (!description.empty()) {
+ XMLNode* desc = new XMLNode(X_("description"));
+ XMLNode* desc_cont = new XMLNode(X_("content"), description);
+ desc->add_child_nocopy (*desc_cont);
+
+ node.add_child_nocopy (*desc);
+ }
XMLTree tree;
bool
Route::set_name (const string& str)
{
+ if (str.empty ()) {
+ return false;
+ }
+
if (str == name()) {
return true;
}
void
Route::set_name_in_state (XMLNode& node, string const & name, bool rename_playlist)
{
- node.add_property (X_("name"), name);
+ node.set_property (X_("name"), name);
XMLNodeList children = node.children();
for (XMLNodeIterator i = children.begin(); i != children.end(); ++i) {
} else if ((*i)->name() == X_("Processor")) {
- XMLProperty const * role = (*i)->property (X_("role"));
- if (role && role->value() == X_("Main")) {
- (*i)->add_property (X_("name"), name);
+ std::string str;
+ if ((*i)->get_property (X_("role"), str) && str == X_("Main")) {
+ (*i)->set_property (X_("name"), name);
}
} else if ((*i)->name() == X_("Diskstream")) {
if (rename_playlist) {
- (*i)->add_property (X_("playlist"), string_compose ("%1.1", name).c_str());
+ (*i)->set_property (X_("playlist"), name + ".1");
}
- (*i)->add_property (X_("name"), name);
+ (*i)->set_property (X_("name"), name);
}
}
_active = yn;
_input->set_active (yn);
_output->set_active (yn);
+ flush_processors ();
active_changed (); // EMIT SIGNAL
_session.set_dirty ();
}
}
-framecnt_t
-Route::update_port_latencies (PortSet& from, PortSet& to, bool playback, framecnt_t our_latency) const
+samplecnt_t
+Route::update_port_latencies (PortSet& from, PortSet& to, bool playback, samplecnt_t our_latency) const
{
/* we assume that all our input ports feed all our output ports. its not
universally true, but the alternative is way too corner-case to worry about.
return all_connections.max;
}
-framecnt_t
+samplecnt_t
Route::set_private_port_latencies (bool playback) const
{
- framecnt_t own_latency = 0;
+ samplecnt_t own_latency = 0;
/* Processor list not protected by lock: MUST BE CALLED FROM PROCESS THREAD
OR LATENCY CALLBACK.
*/
for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
+
if ((*i)->active ()) {
own_latency += (*i)->signal_latency ();
}
}
void
-Route::set_public_port_latencies (framecnt_t value, bool playback) const
+Route::set_public_port_latencies (samplecnt_t value, bool playback) const
{
- /* this is called to set the JACK-visible port latencies, which take
- latency compensation into account.
- */
-
- LatencyRange range;
-
- range.min = value;
- range.max = value;
-
- {
- const PortSet& ports (_input->ports());
- for (PortSet::const_iterator p = ports.begin(); p != ports.end(); ++p) {
- p->set_public_latency_range (range, playback);
+ /* publish private latencies */
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
+ for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
+ boost::shared_ptr<IOProcessor> iop = boost::dynamic_pointer_cast<IOProcessor>(*i);
+ if (!iop) {
+ continue;
}
- }
-
- {
- const PortSet& ports (_output->ports());
- for (PortSet::const_iterator p = ports.begin(); p != ports.end(); ++p) {
- p->set_public_latency_range (range, playback);
+ if (iop->input ()) {
+ iop->input ()->set_public_port_latencies (iop->input()->latency(), true);
+ }
+ if (iop->output ()) {
+ iop->output ()->set_public_port_latencies (iop->output()->latency(), false);
}
}
+
+ /* this is called to set the JACK-visible port latencies, which take
+ * latency compensation into account.
+ */
+ _input->set_public_port_latencies (value, playback);
+ _output->set_public_port_latencies (value, playback);
}
/** Put the invisible processors in the right place in _processors.
*/
ProcessorList new_processors;
+ ProcessorList::iterator dr;
+ ProcessorList::iterator dw;
/* find visible processors */
ProcessorList::iterator after_amp = amp;
++after_amp;
- /* METER */
+ /* Pre-fader METER */
- if (_meter) {
- switch (_meter_point) {
- case MeterInput:
- assert (!_meter->display_to_user ());
- new_processors.push_front (_meter);
- break;
- case MeterPreFader:
- assert (!_meter->display_to_user ());
- new_processors.insert (amp, _meter);
- break;
- case MeterPostFader:
- /* do nothing here */
- break;
- case MeterOutput:
- /* do nothing here */
- break;
- case MeterCustom:
- /* the meter is visible, so we don't touch it here */
- break;
- }
+ if (_meter && _meter_point == MeterPreFader) {
+ /* add meter just before the fader */
+ assert (!_meter->display_to_user ());
+ new_processors.insert (amp, _meter);
}
/* MAIN OUTS */
}
}
-#if 0 // not used - just yet
- if (!is_master() && !is_monitor() && !is_auditioner()) {
- new_processors.push_front (_delayline);
- }
-#endif
-
/* MONITOR CONTROL */
if (_monitor_control && is_monitor ()) {
/* TRIMÂ CONTROL */
- if (_trim && _trim->active()) {
+ ProcessorList::iterator trim = new_processors.end();
+
+ if (_trim->active()) {
assert (!_trim->display_to_user ());
new_processors.push_front (_trim);
+ trim = new_processors.begin();
}
/* INTERNAL RETURN */
new_processors.push_front (_intreturn);
}
- /* EXPORT PROCESSOR */
+ /* DISK READER & WRITER (for Track objects) */
+
+ if (_disk_reader || _disk_writer) {
+ switch (_disk_io_point) {
+ case DiskIOPreFader:
+ if (trim != new_processors.end()) {
+ /* insert BEFORE TRIM */
+ if (_disk_writer) {
+ new_processors.insert (trim, _disk_writer);
+ }
+ if (_disk_reader) {
+ new_processors.insert (trim, _disk_reader);
+ }
+ } else {
+ if (_disk_writer) {
+ new_processors.push_front (_disk_writer);
+ }
+ if (_disk_reader) {
+ new_processors.push_front (_disk_reader);
+ }
+ }
+ break;
+ case DiskIOPostFader:
+ /* insert BEFORE main outs */
+ if (_disk_writer) {
+ new_processors.insert (main, _disk_writer);
+ }
+ if (_disk_reader) {
+ new_processors.insert (main, _disk_reader);
+ }
+ break;
+ case DiskIOCustom:
+ /* reader and writer are visible under this condition, so they
+ * are not invisible and thus not handled here.
+ */
+ break;
+ }
+ }
+
+ /* ensure dist-writer is before disk-reader */
+ if (_disk_reader && _disk_writer) {
+ ProcessorList::iterator reader_pos = find (new_processors.begin(), new_processors.end(), _disk_reader);
+ ProcessorList::iterator writer_pos = find (new_processors.begin(), new_processors.end(), _disk_writer);
+ assert (reader_pos != new_processors.end ());
+ assert (writer_pos != new_processors.end ());
+ if (std::distance (new_processors.begin(), reader_pos) < std::distance (new_processors.begin(), writer_pos)) {
+ new_processors.erase (reader_pos);
+ assert (writer_pos == find (new_processors.begin(), new_processors.end(), _disk_writer));
+ new_processors.insert (++writer_pos, _disk_reader);
+ }
+ }
+ /* EXPORT PROCESSOR */
if (_capturing_processor) {
assert (!_capturing_processor->display_to_user ());
- new_processors.push_front (_capturing_processor);
+ ProcessorList::iterator reader_pos = find (new_processors.begin(), new_processors.end(), _disk_reader);
+ if (reader_pos != new_processors.end()) {
+ /* insert after disk-reader */
+ new_processors.insert (++reader_pos, _capturing_processor);
+ } else {
+ ProcessorList::iterator return_pos = find (new_processors.begin(), new_processors.end(), _intreturn);
+ /* insert after return */
+ if (return_pos != new_processors.end()) {
+ new_processors.insert (++return_pos, _capturing_processor);
+ } else {
+ new_processors.push_front (_capturing_processor);
+ }
+ }
+ }
+
+ /* Polarity Invert */
+ if (_polarity) {
+ ProcessorList::iterator reader_pos = find (new_processors.begin(), new_processors.end(), _disk_reader);
+ if (reader_pos != new_processors.end()) {
+ /* insert after disk-reader */
+ new_processors.insert (++reader_pos, _polarity);
+ } else {
+ ProcessorList::iterator return_pos = find (new_processors.begin(), new_processors.end(), _intreturn);
+ /* insert after return */
+ if (return_pos != new_processors.end()) {
+ new_processors.insert (++return_pos, _polarity);
+ } else {
+ new_processors.push_front (_polarity);
+ }
+ }
+ }
+
+ /* Input meter */
+ if (_meter && _meter_point == MeterInput) {
+ /* add meter just before the disk-writer (if any)
+ * otherwise at the top, but after the latency delayline
+ * (perhaps it should also be after intreturn on busses ??)
+ */
+ assert (!_meter->display_to_user ());
+ ProcessorList::iterator writer_pos = find (new_processors.begin(), new_processors.end(), _disk_writer);
+ if (writer_pos != new_processors.end()) {
+ /* insert before disk-writer */
+ new_processors.insert (writer_pos, _meter);
+ } else {
+ ProcessorList::iterator return_pos = find (new_processors.begin(), new_processors.end(), _intreturn);
+ /* insert after return */
+ if (return_pos != new_processors.end()) {
+ new_processors.insert (++return_pos, _meter);
+ } else {
+ new_processors.push_front (_meter);
+ }
+ }
+ }
+
+ if (!is_master() && !is_monitor() && !is_auditioner()) {
+ ProcessorList::iterator reader_pos = find (new_processors.begin(), new_processors.end(), _disk_reader);
+ if (reader_pos != new_processors.end()) {
+ /* insert before disk-reader */
+ new_processors.insert (reader_pos, _delayline);
+ } else {
+ new_processors.push_front (_delayline);
+ }
}
_processors = new_processors;
return boost::shared_ptr<Processor> ();
}
-/** @return the monitoring state, or in other words what data we are pushing
- * into the route (data from the inputs, data from disk or silence)
- */
-MonitorState
-Route::monitoring_state () const
-{
- return MonitoringInput;
-}
-
/** @return what we should be metering; either the data coming from the input
* IO or the data that is flowing through the route.
*/
return boost::shared_ptr<Processor>();
}
-
+bool
+Route::is_track()
+{
+ return dynamic_cast<Track*>(this) != 0;
+}
void
-Route::non_realtime_locate (framepos_t pos)
+Route::non_realtime_locate (samplepos_t pos)
{
+ Automatable::non_realtime_locate (pos);
+
if (_pannable) {
- _pannable->transport_located (pos);
+ _pannable->non_realtime_locate (pos);
}
- if (_delayline.get()) {
- _delayline.get()->flush();
+#if 0 // XXX mayhaps clear delayline here (and at stop?)
+ if (_delayline) {
+ _delayline->flush ();
}
+#endif
{
//Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- (*i)->transport_located (pos);
+ (*i)->non_realtime_locate (pos);
}
}
- _roll_delay = _initial_delay;
}
void
boost::shared_ptr<AudioPort> source_port = io->audio (i);
AudioBuffer& buf (bufs.get_audio (i%n_buffers));
-
if (i < n_buffers) {
/* first time through just copy a channel into
Route::pan_azimuth_control() const
{
#ifdef MIXBUS
+# undef MIXBUS_PORTS_H
+# include "../../gtk2_ardour/mixbus_ports.h"
boost::shared_ptr<ARDOUR::PluginInsert> plug = ch_post();
if (!plug) {
return boost::shared_ptr<AutomationControl>();
}
- const uint32_t port_channel_post_pan = 2; // gtk2_ardour/mixbus_ports.h
return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (plug->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_channel_post_pan)));
#else
if (!_pannable || !panner()) {
boost::shared_ptr<AutomationControl>
Route::pan_width_control() const
{
+#ifdef MIXBUS
+ if (mixbus() && _ch_pre) {
+ //mono blend
+ return boost::dynamic_pointer_cast<ARDOUR::AutomationControl>(_ch_pre->control(Evoral::Parameter(PluginAutomation, 0, 5)));
+ }
+#endif
if (Profile->get_mixbus() || !_pannable || !panner()) {
return boost::shared_ptr<AutomationControl>();
}
Route::eq_band_cnt () const
{
if (Profile->get_mixbus()) {
+#ifdef MIXBUS32C
+ if (is_master() || mixbus()) {
+ return 3;
+ } else {
+ return 4;
+ }
+#else
return 3;
+#endif
} else {
/* Ardour has no well-known EQ object */
return 0;
}
uint32_t port_number;
- switch (band) {
- case 0:
- if (is_master() || mixbus()) {
- port_number = 4;
- } else {
- port_number = 8;
+ if (is_master() || mixbus()) {
+ switch (band) {
+ case 0: port_number = 4; break;
+ case 1: port_number = 3; break;
+ case 2: port_number = 2; break;
+ default:
+ return boost::shared_ptr<AutomationControl>();
}
- break;
- case 1:
- if (is_master() || mixbus()) {
- port_number = 3;
- } else {
- port_number = 6;
+ } else {
+#ifdef MIXBUS32C
+ switch (band) {
+ case 0: port_number = 14; break;
+ case 1: port_number = 12; break;
+ case 2: port_number = 10; break;
+ case 3: port_number = 8; break;
+ default:
+ return boost::shared_ptr<AutomationControl>();
}
- break;
- case 2:
- if (is_master() || mixbus()) {
- port_number = 2;
- } else {
- port_number = 4;
+#else
+ switch (band) {
+ case 0: port_number = 8; break;
+ case 1: port_number = 6; break;
+ case 2: port_number = 4; break;
+ default:
+ return boost::shared_ptr<AutomationControl>();
}
- break;
- default:
- return boost::shared_ptr<AutomationControl>();
+#endif
}
return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_number)));
Route::eq_freq_controllable (uint32_t band) const
{
#ifdef MIXBUS
-
if (mixbus() || is_master()) {
/* no frequency controls for mixbusses or master */
return boost::shared_ptr<AutomationControl>();
}
uint32_t port_number;
+#ifdef MIXBUS32C
switch (band) {
- case 0:
- port_number = 7;
- break;
- case 1:
- port_number = 5;
- break;
- case 2:
- port_number = 3;
- break;
- default:
- return boost::shared_ptr<AutomationControl>();
+ case 0: port_number = 13; break; // lo
+ case 1: port_number = 11; break; // lo mid
+ case 2: port_number = 9; break; // hi mid
+ case 3: port_number = 7; break; // hi
+ default:
+ return boost::shared_ptr<AutomationControl>();
+ }
+#else
+ switch (band) {
+ case 0: port_number = 7; break;
+ case 1: port_number = 5; break;
+ case 2: port_number = 3; break;
+ default:
+ return boost::shared_ptr<AutomationControl>();
}
+#endif
return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_number)));
#else
boost::shared_ptr<AutomationControl>
Route::eq_shape_controllable (uint32_t band) const
{
+#ifdef MIXBUS32C
+ boost::shared_ptr<PluginInsert> eq = ch_eq();
+ if (is_master() || mixbus() || !eq) {
+ return boost::shared_ptr<AutomationControl>();
+ }
+ switch (band) {
+ case 0:
+ return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 4))); // lo bell
+ break;
+ case 3:
+ return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 3))); // hi bell
+ break;
+ default:
+ break;
+ }
+#endif
return boost::shared_ptr<AutomationControl>();
}
}
boost::shared_ptr<AutomationControl>
-Route::eq_hpf_controllable () const
+Route::filter_freq_controllable (bool hpf) const
{
#ifdef MIXBUS
boost::shared_ptr<PluginInsert> eq = ch_eq();
- if (!eq) {
+ if (is_master() || mixbus() || !eq) {
+ return boost::shared_ptr<AutomationControl>();
+ }
+ if (hpf) {
+#ifdef MIXBUS32C
+ return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 5))); // HPF freq
+#else
+ return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 2)));
+#endif
+ } else {
+#ifdef MIXBUS32C
+ return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (eq->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 6))); // LPF freq
+#else
+ return boost::shared_ptr<AutomationControl>();
+#endif
+ }
+
+#else
+ return boost::shared_ptr<AutomationControl>();
+#endif
+}
+
+boost::shared_ptr<AutomationControl>
+Route::filter_slope_controllable (bool) const
+{
+ return boost::shared_ptr<AutomationControl>();
+}
+
+boost::shared_ptr<AutomationControl>
+Route::filter_enable_controllable (bool) const
+{
+#ifdef MIXBUS32C
+ boost::shared_ptr<PluginInsert> eq = ch_eq();
+
+ if (is_master() || mixbus() || !eq) {
return boost::shared_ptr<AutomationControl>();
}
#endif
}
+boost::shared_ptr<AutomationControl>
+Route::tape_drive_controllable () const
+{
+#ifdef MIXBUS
+
+ if ( _ch_pre && (is_master() || mixbus()) ) {
+ return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (_ch_pre->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 4)));
+ }
+#endif
+
+ return boost::shared_ptr<AutomationControl>();
+}
+
string
Route::eq_band_name (uint32_t band) const
{
+#ifdef MIXBUS32C
+ if (is_master() || mixbus()) {
+#endif
if (Profile->get_mixbus()) {
switch (band) {
- case 0:
- return _("lo");
- case 1:
- return _("mid");
- case 2:
- return _("hi");
- default:
- return string();
+ case 0: return _("lo");
+ case 1: return _("mid");
+ case 2: return _("hi");
+ default: return string();
}
} else {
return string ();
}
+#ifdef MIXBUS32C
+ } else {
+ switch (band) {
+ case 0: return _("lo");
+ case 1: return _("lo mid");
+ case 2: return _("hi mid");
+ case 3: return _("hi");
+ default: return string();
+ }
+ }
+#endif
}
boost::shared_ptr<AutomationControl>
return boost::shared_ptr<AutomationControl>();
#endif
}
-boost::shared_ptr<AutomationControl>
+boost::shared_ptr<ReadOnlyControl>
Route::comp_redux_controllable () const
{
#ifdef MIXBUS
boost::shared_ptr<PluginInsert> comp = ch_comp();
if (!comp) {
- return boost::shared_ptr<AutomationControl>();
+ return boost::shared_ptr<ReadOnlyControl>();
+ }
+ if (is_master()) {
+ return comp->control_output (2);
+ } else {
+ return comp->control_output (6);
}
- return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (comp->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, 6)));
#else
- return boost::shared_ptr<AutomationControl>();
+ return boost::shared_ptr<ReadOnlyControl>();
#endif
}
}
boost::shared_ptr<AutomationControl>
-Route::send_level_controllable (uint32_t n) const
+Route::send_pan_azi_controllable (uint32_t n) const
{
#ifdef MIXBUS
+# undef MIXBUS_PORTS_H
+# include "../../gtk2_ardour/mixbus_ports.h"
boost::shared_ptr<ARDOUR::PluginInsert> plug = ch_post();
- if (!plug) {
- return boost::shared_ptr<AutomationControl>();
- }
+ if (plug && !mixbus()) {
+ uint32_t port_id = 0;
+ switch (n) {
+# ifdef MIXBUS32C
+ case 0: port_id = port_channel_post_aux0_pan; break; //32c mb "pan" controls use zero-based names, unlike levels. ugh
+ case 1: port_id = port_channel_post_aux1_pan; break;
+ case 2: port_id = port_channel_post_aux2_pan; break;
+ case 3: port_id = port_channel_post_aux3_pan; break;
+ case 4: port_id = port_channel_post_aux4_pan; break;
+ case 5: port_id = port_channel_post_aux5_pan; break;
+ case 6: port_id = port_channel_post_aux6_pan; break;
+ case 7: port_id = port_channel_post_aux7_pan; break;
+ case 8: port_id = port_channel_post_aux8_pan; break;
+ case 9: port_id = port_channel_post_aux9_pan; break;
+ case 10: port_id = port_channel_post_aux10_pan; break;
+ case 11: port_id = port_channel_post_aux11_pan; break;
+# endif
+ default:
+ break;
+ }
- if (n >= 8) {
- /* no such bus */
- return boost::shared_ptr<AutomationControl>();
+ if (port_id > 0) {
+ return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (plug->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_id)));
+ }
}
+#endif
+
+ return boost::shared_ptr<AutomationControl>();
+}
- const uint32_t port_id = port_channel_post_aux1_level + (2*n); // gtk2_ardour/mixbus_ports.h
- return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (plug->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_id)));
-#else
+boost::shared_ptr<AutomationControl>
+Route::send_level_controllable (uint32_t n) const
+{
+#ifdef MIXBUS
+# undef MIXBUS_PORTS_H
+# include "../../gtk2_ardour/mixbus_ports.h"
+ boost::shared_ptr<ARDOUR::PluginInsert> plug = ch_post();
+ if (plug && !mixbus()) {
+ uint32_t port_id = 0;
+ switch (n) {
+ case 0: port_id = port_channel_post_aux1_level; break;
+ case 1: port_id = port_channel_post_aux2_level; break;
+ case 2: port_id = port_channel_post_aux3_level; break;
+ case 3: port_id = port_channel_post_aux4_level; break;
+ case 4: port_id = port_channel_post_aux5_level; break;
+ case 5: port_id = port_channel_post_aux6_level; break;
+ case 6: port_id = port_channel_post_aux7_level; break;
+ case 7: port_id = port_channel_post_aux8_level; break;
+# ifdef MIXBUS32C
+ case 8: port_id = port_channel_post_aux9_level; break;
+ case 9: port_id = port_channel_post_aux10_level; break;
+ case 10: port_id = port_channel_post_aux11_level; break;
+ case 11: port_id = port_channel_post_aux12_level; break;
+# endif
+ default:
+ break;
+ }
+
+ if (port_id > 0) {
+ return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (plug->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_id)));
+ }
+# ifdef MIXBUS32C
+ assert (n > 11);
+ n -= 12;
+# else
+ assert (n > 7);
+ n -= 8;
+# endif
+ }
+#endif
boost::shared_ptr<Send> s = boost::dynamic_pointer_cast<Send>(nth_send (n));
if (!s) {
return boost::shared_ptr<AutomationControl>();
}
return s->gain_control ();
-#endif
}
boost::shared_ptr<AutomationControl>
Route::send_enable_controllable (uint32_t n) const
{
#ifdef MIXBUS
+# undef MIXBUS_PORTS_H
+# include "../../gtk2_ardour/mixbus_ports.h"
boost::shared_ptr<ARDOUR::PluginInsert> plug = ch_post();
- if (!plug) {
- return boost::shared_ptr<AutomationControl>();
- }
+ if (plug && !mixbus()) {
+ uint32_t port_id = 0;
+ switch (n) {
+ case 0: port_id = port_channel_post_aux1_asgn; break;
+ case 1: port_id = port_channel_post_aux2_asgn; break;
+ case 2: port_id = port_channel_post_aux3_asgn; break;
+ case 3: port_id = port_channel_post_aux4_asgn; break;
+ case 4: port_id = port_channel_post_aux5_asgn; break;
+ case 5: port_id = port_channel_post_aux6_asgn; break;
+ case 6: port_id = port_channel_post_aux7_asgn; break;
+ case 7: port_id = port_channel_post_aux8_asgn; break;
+# ifdef MIXBUS32C
+ case 8: port_id = port_channel_post_aux9_asgn; break;
+ case 9: port_id = port_channel_post_aux10_asgn; break;
+ case 10: port_id = port_channel_post_aux11_asgn; break;
+ case 11: port_id = port_channel_post_aux12_asgn; break;
+# endif
+ default:
+ break;
+ }
- if (n >= 8) {
- /* no such bus */
- return boost::shared_ptr<AutomationControl>();
+ if (port_id > 0) {
+ return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (plug->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_id)));
+ }
+# ifdef MIXBUS32C
+ assert (n > 11);
+ n -= 12;
+# else
+ assert (n > 7);
+ n -= 8;
+# endif
}
-
- const uint32_t port_id = port_channel_post_aux1_asgn + (2*n); // gtk2_ardour/mixbus_ports.h
- return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (plug->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_id)));
-#else
+#endif
/* although Ardour sends have enable/disable as part of the Processor
- API, it is not exposed as a controllable.
-
- XXX: we should fix this.
- */
+ * API, it is not exposed as a controllable.
+ *
+ * XXX: we should fix this (make it click-free, automatable enable-control)
+ */
return boost::shared_ptr<AutomationControl>();
-#endif
}
string
Route::send_name (uint32_t n) const
{
#ifdef MIXBUS
- if (n >= 8) {
- return string();
- }
- boost::shared_ptr<Route> r = _session.get_mixbus (n);
- assert (r);
- return r->name();
+ boost::shared_ptr<ARDOUR::PluginInsert> plug = ch_post();
+ if (plug && !mixbus()) {
+# ifdef MIXBUS32C
+ if (n < 12) {
+ return _session.get_mixbus (n)->name();
+ }
+ n -= 12;
#else
+ if (n < 8) {
+ return _session.get_mixbus (n)->name();
+ }
+ n -= 8;
+# endif
+ }
+#endif
boost::shared_ptr<Processor> p = nth_send (n);
if (p) {
return p->name();
} else {
return string();
}
-#endif
}
boost::shared_ptr<AutomationControl>
if (!plug) {
return boost::shared_ptr<AutomationControl>();
}
+# undef MIXBUS_PORTS_H
+# include "../../gtk2_ardour/mixbus_ports.h"
return boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (plug->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_channel_post_mstr_assign)));
#else
return boost::shared_ptr<AutomationControl>();
{
_solo_control->clear_all_solo_state ();
}
+
+boost::shared_ptr<AutomationControl>
+Route::automation_control_recurse (PBD::ID const & id) const
+{
+ boost::shared_ptr<AutomationControl> ac = Automatable::automation_control (id);
+
+ if (ac) {
+ return ac;
+ }
+
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
+
+ for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
+ if ((ac = (*i)->automation_control (id))) {
+ return ac;
+ }
+ }
+
+ return boost::shared_ptr<AutomationControl> ();
+}
+
+SlavableControlList
+Route::slavables () const
+{
+ SlavableControlList rv;
+ rv.push_back (_gain_control);
+ rv.push_back (_mute_control);
+ rv.push_back (_solo_control);
+ return rv;
+}
+
+void
+Route::set_disk_io_point (DiskIOPoint diop)
+{
+ bool display = false;
+
+ cerr << "set disk io to " << enum_2_string (diop) << endl;
+
+ switch (diop) {
+ case DiskIOCustom:
+ display = true;
+ break;
+ default:
+ display = false;
+ }
+
+ if (_disk_writer) {
+ _disk_writer->set_display_to_user (display);
+ }
+
+ if (_disk_reader) {
+ _disk_reader->set_display_to_user (display);
+ }
+
+ const bool changed = (diop != _disk_io_point);
+
+ _disk_io_point = diop;
+
+ if (changed) {
+ Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
+ configure_processors (0);
+ }
+
+ processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
+}
+
+void
+Route::set_loop (Location* l)
+{
+ _loop_location = l;
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
+ for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
+ (*i)->set_loop (l);
+ }
+}
+
+#ifdef USE_TRACKS_CODE_FEATURES
+
+/* This is the Tracks version of Track::monitoring_state().
+ *
+ * Ardour developers: try to flag or fix issues if parts of the libardour API
+ * change in ways that invalidate this
+ */
+
+MonitorState
+Route::monitoring_state () const
+{
+ /* Explicit requests */
+
+ if (_monitoring != MonitorInput) {
+ return MonitoringInput;
+ }
+
+ if (_monitoring & MonitorDisk) {
+ return MonitoringDisk;
+ }
+
+ /* This is an implementation of the truth table in doc/monitor_modes.pdf;
+ I don't think it's ever going to be too pretty too look at.
+ */
+
+ // GZ: NOT USED IN TRACKS
+ //bool const auto_input = _session.config.get_auto_input ();
+ //bool const software_monitor = Config->get_monitoring_model() == SoftwareMonitoring;
+ //bool const tape_machine_mode = Config->get_tape_machine_mode ();
+
+ bool const roll = _session.transport_rolling ();
+ bool const track_rec = _diskstream->record_enabled ();
+ bool session_rec = _session.actively_recording ();
+
+ if (track_rec) {
+
+ if (!session_rec && roll) {
+ return MonitoringDisk;
+ } else {
+ return MonitoringInput;
+ }
+
+ } else {
+
+ if (roll) {
+ return MonitoringDisk;
+ }
+ }
+
+ return MonitoringSilence;
+}
+
+#else
+
+/* This is the Ardour/Mixbus version of Track::monitoring_state().
+ *
+ * Tracks developers: do NOT modify this method under any circumstances.
+ */
+
+MonitorState
+Route::monitoring_state () const
+{
+ if (!_disk_reader) {
+ return MonitoringInput;
+ }
+
+ /* Explicit requests */
+ MonitorChoice m (_monitoring_control->monitoring_choice());
+
+ if (m != MonitorAuto) {
+
+ MonitorState ms ((MonitorState) 0);
+
+ if (m & MonitorInput) {
+ ms = MonitoringInput;
+ }
+
+ if (m & MonitorDisk) {
+ ms = MonitorState (ms | MonitoringDisk);
+ }
+
+ return ms;
+ }
+
+ switch (_session.config.get_session_monitoring ()) {
+ case MonitorDisk:
+ return MonitoringDisk;
+ break;
+ case MonitorInput:
+ return MonitoringInput;
+ break;
+ default:
+ break;
+ }
+
+ /* This is an implementation of the truth table in doc/monitor_modes.pdf;
+ I don't think it's ever going to be too pretty too look at.
+ */
+
+ bool const roll = _session.transport_rolling ();
+ bool const track_rec = _disk_writer->record_enabled ();
+ bool const auto_input = _session.config.get_auto_input ();
+ bool const software_monitor = Config->get_monitoring_model() == SoftwareMonitoring;
+ bool const tape_machine_mode = Config->get_tape_machine_mode ();
+ bool session_rec;
+
+ /* I suspect that just use actively_recording() is good enough all the
+ * time, but just to keep the semantics the same as they were before
+ * sept 26th 2012, we differentiate between the cases where punch is
+ * enabled and those where it is not.
+ *
+ * rg: sept 30 2017: Above is not the case: punch-in/out location is
+ * global session playhead position.
+ * When this method is called from process_output_buffers() we need
+ * to use delay-compensated route's process-position.
+ *
+ * NB. Disk reader/writer may also be offset by a same amount of time.
+ *
+ * Also keep in mind that _session.transport_rolling() is false during
+ * pre-roll but the disk already produces output.
+ *
+ * TODO: FIXME
+ */
+
+ if (_session.config.get_punch_in() || _session.config.get_punch_out()) {
+ session_rec = _session.actively_recording ();
+ } else {
+ session_rec = _session.get_record_enabled();
+ }
+
+ if (track_rec) {
+
+ if (!session_rec && roll && auto_input) {
+ return MonitoringDisk;
+ } else {
+ return software_monitor ? MonitoringInput : MonitoringSilence;
+ }
+
+ } else {
+
+ if (tape_machine_mode) {
+
+ return MonitoringDisk;
+
+ } else {
+
+ if (!roll && auto_input) {
+ return software_monitor ? MonitoringInput : MonitoringSilence;
+ } else {
+ return MonitoringDisk;
+ }
+
+ }
+ }
+
+ abort(); /* NOTREACHED */
+ return MonitoringSilence;
+}
+#endif