#include "ardour/internal_return.h"
#include "ardour/internal_send.h"
#include "ardour/meter.h"
+#include "ardour/delayline.h"
#include "ardour/midi_buffer.h"
#include "ardour/midi_port.h"
#include "ardour/monitor_processor.h"
, GraphNode (sess._process_graph)
, _active (true)
, _signal_latency (0)
+ , _signal_latency_at_amp_position (0)
, _initial_delay (0)
, _roll_delay (0)
, _flags (flg)
, _order_key (0)
, _has_order_key (false)
, _remote_control_id (0)
+ , _track_number (0)
, _in_configure_processors (false)
, _initial_io_setup (false)
, _custom_meter_position_noted (false)
_output->changed.connect_same_thread (*this, boost::bind (&Route::output_change_handler, this, _1, _2));
_output->PortCountChanging.connect_same_thread (*this, boost::bind (&Route::output_port_count_changing, this, _1));
+#if 0 // not used - just yet
+ if (!is_master() && !is_monitor() && !is_auditioner()) {
+ _delayline.reset (new DelayLine (_session, _name));
+ add_processor (_delayline, PreFader);
+ }
+#endif
+
/* add amp processor */
_amp.reset (new Amp (_session));
assert (!AudioEngine::instance()->process_lock().trylock());
Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
- assert(lm.locked());
+ if (!lm.locked()) {
+ bufs.silence (nframes, 0);
+ return;
+ }
/* figure out if we're going to use gain automation */
if (gain_automation_ok) {
_amp->set_gain_automation_buffer (_session.gain_automation_buffer ());
- _amp->setup_gain_automation (start_frame, end_frame, nframes);
+ _amp->setup_gain_automation (
+ start_frame + _signal_latency_at_amp_position,
+ end_frame + _signal_latency_at_amp_position,
+ nframes);
} else {
_amp->apply_gain_automation (false);
}
on a transition between monitoring states we get a de-clicking gain
change in the _main_outs delivery.
*/
+ bool silence = monitoring_state () == MonitoringSilence;
- _main_outs->no_outs_cuz_we_no_monitor (monitoring_state () == MonitoringSilence);
+ //but we override this in the case where we have an internal generator
+ if ( _have_internal_generator )
+ silence = false;
+
+ _main_outs->no_outs_cuz_we_no_monitor (silence);
/* -------------------------------------------------------------------------------------------
GLOBAL DECLICK (for transport changes etc.)
/* set this to be true if the meter will already have been ::run() earlier */
bool const meter_already_run = metering_state() == MeteringInput;
+ framecnt_t latency = 0;
+
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
if (meter_already_run && boost::dynamic_pointer_cast<PeakMeter> (*i)) {
do we catch route != active somewhere higher?
*/
- (*i)->run (bufs, start_frame, end_frame, nframes, *i != _processors.back());
+ if (boost::dynamic_pointer_cast<Send>(*i) != 0) {
+ boost::dynamic_pointer_cast<Send>(*i)->set_delay_in(_signal_latency - latency);
+ }
+
+ (*i)->run (bufs, start_frame - latency, end_frame - latency, nframes, *i != _processors.back());
bufs.set_count ((*i)->output_streams());
+
+ if ((*i)->active ()) {
+ latency += (*i)->signal_latency ();
+ }
}
}
void
Route::bounce_process (BufferSet& buffers, framepos_t start, framecnt_t nframes,
- boost::shared_ptr<Processor> endpoint, bool include_endpoint, bool for_export)
+ boost::shared_ptr<Processor> endpoint,
+ bool include_endpoint, bool for_export, bool for_freeze)
{
/* If no processing is required, there's no need to go any further. */
if (!endpoint && !include_endpoint) {
return;
}
+ framecnt_t latency = bounce_get_latency(_amp, false, for_export, for_freeze);
+ _amp->set_gain_automation_buffer (_session.gain_automation_buffer ());
+ _amp->setup_gain_automation (start - latency, start - latency + nframes, nframes);
+
+ latency = 0;
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
if (!include_endpoint && (*i) == endpoint) {
}
/* if we're not exporting, stop processing if we come across a routing processor. */
-
- if (!for_export && (*i)->does_routing()) {
+ if (!for_export && boost::dynamic_pointer_cast<PortInsert>(*i)) {
+ break;
+ }
+ if (!for_export && for_freeze && (*i)->does_routing() && (*i)->active()) {
break;
}
* oh, and don't bother with the peak meter either.
*/
if (!(*i)->does_routing() && !boost::dynamic_pointer_cast<PeakMeter>(*i)) {
- (*i)->run (buffers, start, start+nframes, nframes, true);
+ (*i)->run (buffers, start - latency, start - latency + nframes, nframes, true);
+ buffers.set_count ((*i)->output_streams());
+ latency += (*i)->signal_latency ();
}
- buffers.set_count ((*i)->output_streams());
-
if ((*i) == endpoint) {
break;
}
}
framecnt_t
-Route::bounce_get_latency (boost::shared_ptr<Processor> endpoint, bool include_endpoint, bool for_export) const
+Route::bounce_get_latency (boost::shared_ptr<Processor> endpoint,
+ bool include_endpoint, bool for_export, bool for_freeze) const
{
framecnt_t latency = 0;
if (!endpoint && !include_endpoint) {
}
for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
-
if (!include_endpoint && (*i) == endpoint) {
break;
}
- if (!for_export && (*i)->does_routing()) {
+ if (!for_export && boost::dynamic_pointer_cast<PortInsert>(*i)) {
+ break;
+ }
+ if (!for_export && for_freeze && (*i)->does_routing() && (*i)->active()) {
break;
}
if (!(*i)->does_routing() && !boost::dynamic_pointer_cast<PeakMeter>(*i)) {
}
ChanCount
-Route::bounce_get_output_streams (ChanCount &cc, boost::shared_ptr<Processor> endpoint, bool include_endpoint, bool for_export) const
+Route::bounce_get_output_streams (ChanCount &cc, boost::shared_ptr<Processor> endpoint,
+ bool include_endpoint, bool for_export, bool for_freeze) const
{
if (!endpoint && !include_endpoint) {
return cc;
}
for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
-
if (!include_endpoint && (*i) == endpoint) {
break;
}
- if (!for_export && (*i)->does_routing()) {
+ if (!for_export && boost::dynamic_pointer_cast<PortInsert>(*i)) {
+ break;
+ }
+ if (!for_export && for_freeze && (*i)->does_routing() && (*i)->active()) {
break;
}
if (!(*i)->does_routing() && !boost::dynamic_pointer_cast<PeakMeter>(*i)) {
return;
}
+ if (is_master() || is_monitor() || is_auditioner()) {
+ DEBUG_TRACE (DEBUG::Solo, string_compose ("%1 ignore solo change (master, monitor or auditioner)\n", name()));
+ return;
+ }
+
if (_route_group && src != _route_group && _route_group->is_active() && _route_group->is_solo()) {
_route_group->foreach_route (boost::bind (&Route::set_solo, _1, yn, _route_group));
return;
if (processor->set_state (node, version)) {
return false;
}
+
+ //A2 uses the "active" flag in the toplevel redirect node, not in the child plugin/IO
+ if (i != children.end()) {
+ if ((prop = (*i)->property (X_("active"))) != 0) {
+ if ( string_is_affirmative (prop->value()) && !_session.get_disable_all_loaded_plugins() )
+ processor->activate();
+ else
+ processor->deactivate();
+ }
+ }
- return (add_processor (processor, placement) == 0);
+ return (add_processor (processor, placement, 0, false) == 0);
}
catch (failed_constructor &err) {
seen_amp = true;
}
- if ((*i) == _amp || (*i) == _meter || (*i) == _main_outs) {
+ if ((*i) == _amp || (*i) == _meter || (*i) == _main_outs || (*i) == _delayline) {
/* you can't remove these */
/* these can never be removed */
- if (processor == _amp || processor == _meter || processor == _main_outs) {
+ if (processor == _amp || processor == _meter || processor == _main_outs || processor == _delayline) {
return 0;
}
/* these can never be removed */
- if (processor == _amp || processor == _meter || processor == _main_outs) {
+ if (processor == _amp || processor == _meter || processor == _main_outs || processor == _delayline) {
++i;
continue;
}
node->add_child_nocopy (_mute_control->get_state ());
node->add_child_nocopy (_mute_master->get_state ());
+ if (full_state) {
+ node->add_child_nocopy (Automatable::get_automation_xml_state ());
+ }
+
XMLNode* remote_control_node = new XMLNode (X_("RemoteControl"));
snprintf (buf, sizeof (buf), "%d", _remote_control_id);
remote_control_node->add_property (X_("id"), buf);
} else if (child->name() == X_("MuteMaster")) {
_mute_master->set_state (*child, version);
+
+ } else if (child->name() == Automatable::xml_node_name) {
+ set_automation_xml_state (*child, Evoral::Parameter(NullAutomation));
}
}
int
Route::set_state_2X (const XMLNode& node, int version)
{
+ LocaleGuard lg (X_("C"));
XMLNodeList nlist;
XMLNodeConstIterator niter;
XMLNode *child;
} else if (prop->value() == "meter") {
_meter->set_state (**niter, Stateful::current_state_version);
new_order.push_back (_meter);
+ } else if (prop->value() == "delay") {
+ if (_delayline) {
+ _delayline->set_state (**niter, Stateful::current_state_version);
+ new_order.push_back (_delayline);
+ }
} else if (prop->value() == "main-outs") {
_main_outs->set_state (**niter, Stateful::current_state_version);
} else if (prop->value() == "intreturn") {
if (prop->value() == "intsend") {
- processor.reset (new InternalSend (_session, _pannable, _mute_master, boost::shared_ptr<Route>(), Delivery::Aux, true));
+ processor.reset (new InternalSend (_session, _pannable, _mute_master, boost::dynamic_pointer_cast<ARDOUR::Route>(shared_from_this()), boost::shared_ptr<Route>(), Delivery::Aux, true));
} else if (prop->value() == "ladspa" || prop->value() == "Ladspa" ||
prop->value() == "lv2" ||
/* make sure we have one */
if (!_monitor_send) {
- _monitor_send.reset (new InternalSend (_session, _pannable, _mute_master, _session.monitor_out(), Delivery::Listen));
+ _monitor_send.reset (new InternalSend (_session, _pannable, _mute_master, boost::dynamic_pointer_cast<ARDOUR::Route>(shared_from_this()), _session.monitor_out(), Delivery::Listen));
_monitor_send->set_display_to_user (false);
}
{
Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
boost::shared_ptr<Pannable> sendpan (new Pannable (_session));
- listener.reset (new InternalSend (_session, sendpan, _mute_master, route, Delivery::Aux));
+ listener.reset (new InternalSend (_session, sendpan, _mute_master, boost::dynamic_pointer_cast<ARDOUR::Route>(shared_from_this()), route, Delivery::Aux));
}
add_processor (listener, before);
Route::update_signal_latency ()
{
framecnt_t l = _output->user_latency();
+ framecnt_t lamp = 0;
+ bool before_amp = true;
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
if ((*i)->active ()) {
l += (*i)->signal_latency ();
}
+ if ((*i) == _amp) {
+ before_amp = false;
+ }
+ if (before_amp) {
+ lamp = l;
+ }
}
DEBUG_TRACE (DEBUG::Latency, string_compose ("%1: internal signal latency = %2\n", _name, l));
+ _signal_latency_at_amp_position = lamp;
if (_signal_latency != l) {
_signal_latency = l;
signal_latency_changed (); /* EMIT SIGNAL */
}
Route::SoloControllable::SoloControllable (std::string name, boost::shared_ptr<Route> r)
- : AutomationControl (r->session(), Evoral::Parameter (SoloAutomation),
- boost::shared_ptr<AutomationList>(), name)
+ : AutomationControl (r->session(),
+ Evoral::Parameter (SoloAutomation),
+ ParameterDescriptor(Evoral::Parameter (SoloAutomation)),
+ boost::shared_ptr<AutomationList>(), name)
, _route (r)
{
boost::shared_ptr<AutomationList> gl(new AutomationList(Evoral::Parameter(SoloAutomation)));
+ gl->set_interpolation(Evoral::ControlList::Discrete);
set_list (gl);
}
void
Route::SoloControllable::set_value (double val)
{
- bool bval = ((val >= 0.5f) ? true: false);
+ const bool bval = ((val >= 0.5) ? true : false);
boost::shared_ptr<RouteList> rl (new RouteList);
}
Route::MuteControllable::MuteControllable (std::string name, boost::shared_ptr<Route> r)
- : AutomationControl (r->session(), Evoral::Parameter (MuteAutomation),
- boost::shared_ptr<AutomationList>(), name)
+ : AutomationControl (r->session(),
+ Evoral::Parameter (MuteAutomation),
+ ParameterDescriptor (Evoral::Parameter (MuteAutomation)),
+ boost::shared_ptr<AutomationList>(),
+ name)
, _route (r)
{
boost::shared_ptr<AutomationList> gl(new AutomationList(Evoral::Parameter(MuteAutomation)));
+ gl->set_interpolation(Evoral::ControlList::Discrete);
set_list (gl);
}
void
-Route::MuteControllable::set_value (double val)
+Route::MuteControllable::set_superficial_value(bool muted)
{
- bool bval = ((val >= 0.5f) ? true: false);
+ /* Note we can not use AutomationControl::set_value here since it will emit
+ Changed(), but the value will not be correct to the observer. */
- boost::shared_ptr<RouteList> rl (new RouteList);
+ bool to_list = _list && ((AutomationList*)_list.get())->automation_write();
+
+ Control::set_double (muted, _session.transport_frame(), to_list);
+}
+
+void
+Route::MuteControllable::set_value (double val)
+{
+ const bool bval = ((val >= 0.5) ? true : false);
boost::shared_ptr<Route> r = _route.lock ();
if (!r) {
return;
}
- rl->push_back (r);
- _session.set_mute (rl, bval);
+ if (_list && ((AutomationList*)_list.get())->automation_playback()) {
+ // Playing back automation, set route mute directly
+ r->set_mute (bval, this);
+ } else {
+ // Set from user, queue mute event
+ boost::shared_ptr<RouteList> rl (new RouteList);
+ rl->push_back (r);
+ _session.set_mute (rl, bval, Session::rt_cleanup);
+ }
+
+ // Set superficial/automation value to drive controller (and possibly record)
+ set_superficial_value(bval);
}
double
Route::MuteControllable::get_value () const
{
- boost::shared_ptr<Route> r = _route.lock ();
- if (!r) {
- return 0;
+ if (_list && ((AutomationList*)_list.get())->automation_playback()) {
+ // Playing back automation, get the value from the list
+ return AutomationControl::get_value();
}
- return r->muted() ? 1.0f : 0.0f;
+ // Not playing back automation, get the actual route mute value
+ boost::shared_ptr<Route> r = _route.lock ();
+ return (r && r->muted()) ? 1.0 : 0.0;
}
void
bool
Route::set_name (const string& str)
{
- bool ret;
- string ioproc_name;
- string name;
+ if (str == name()) {
+ return true;
+ }
- name = Route::ensure_track_or_route_name (str, _session);
+ string name = Route::ensure_track_or_route_name (str, _session);
SessionObject::set_name (name);
- ret = (_input->set_name(name) && _output->set_name(name));
+ bool ret = (_input->set_name(name) && _output->set_name(name));
if (ret) {
/* rename the main outs. Leave other IO processors
void
Route::set_active (bool yn, void* src)
{
+ if (_session.transport_rolling()) {
+ return;
+ }
+
if (_route_group && src != _route_group && _route_group->is_active() && _route_group->is_route_active()) {
_route_group->foreach_route (boost::bind (&Route::set_active, _1, yn, _route_group));
return;
void
Route::meter ()
{
- Glib::Threads::RWLock::ReaderLock rm (_processor_lock, Glib::Threads::TRY_LOCK);
+ Glib::Threads::RWLock::ReaderLock rm (_processor_lock);
assert (_meter);
/* maybe one of our processors does or ... */
- Glib::Threads::RWLock::ReaderLock rm (_processor_lock, Glib::Threads::TRY_LOCK);
+ Glib::Threads::RWLock::ReaderLock rm (_processor_lock);
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
if ((c = boost::dynamic_pointer_cast<AutomationControl>((*i)->control (param))) != 0) {
break;
}
}
+#if 0 // not used - just yet
+ if (!is_master() && !is_monitor() && !is_auditioner()) {
+ new_processors.push_front (_delayline);
+ }
+#endif
+
/* MONITOR CONTROL */
if (_monitor_control && is_monitor ()) {
_pannable->transport_located (pos);
}
+ if (_delayline.get()) {
+ _delayline.get()->flush();
+ }
+
{
//Glib::Threads::Mutex::Lock lx (AudioEngine::instance()->process_lock ());
Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
projects / ardour.git / blobdiff