#include <cassert>
#include <algorithm>
+#include <boost/algorithm/string.hpp>
+
#include "pbd/xml++.h"
#include "pbd/enumwriter.h"
#include "pbd/memento_command.h"
#include "pbd/convert.h"
#include "pbd/boost_debug.h"
-#include "evoral/Curve.hpp"
-
#include "ardour/amp.h"
-#include "ardour/audio_port.h"
+#include "ardour/audio_buffer.h"
#include "ardour/audioengine.h"
#include "ardour/buffer.h"
#include "ardour/buffer_set.h"
-#include "ardour/configuration.h"
-#include "ardour/cycle_timer.h"
+#include "ardour/capturing_processor.h"
#include "ardour/debug.h"
#include "ardour/delivery.h"
-#include "ardour/dB.h"
-#include "ardour/internal_send.h"
#include "ardour/internal_return.h"
-#include "ardour/ladspa_plugin.h"
+#include "ardour/internal_send.h"
#include "ardour/meter.h"
-#include "ardour/mix.h"
#include "ardour/monitor_processor.h"
#include "ardour/pannable.h"
-#include "ardour/panner.h"
#include "ardour/panner_shell.h"
#include "ardour/plugin_insert.h"
#include "ardour/port.h"
#include "ardour/port_insert.h"
#include "ardour/processor.h"
-#include "ardour/profile.h"
#include "ardour/route.h"
#include "ardour/route_group.h"
#include "ardour/send.h"
#include "ardour/session.h"
-#include "ardour/timestamps.h"
-#include "ardour/utils.h"
-#include "ardour/graph.h"
#include "ardour/unknown_processor.h"
-#include "ardour/capturing_processor.h"
+#include "ardour/utils.h"
#include "i18n.h"
using namespace ARDOUR;
using namespace PBD;
-uint32_t Route::order_key_cnt = 0;
-PBD::Signal1<void,string const&> Route::SyncOrderKeys;
+PBD::Signal1<void,RouteSortOrderKey> Route::SyncOrderKeys;
PBD::Signal0<void> Route::RemoteControlIDChange;
Route::Route (Session& sess, string name, Flag flg, DataType default_type)
: SessionObject (sess, name)
, Automatable (sess)
- , GraphNode( sess.route_graph )
+ , GraphNode (sess._process_graph)
, _active (true)
, _signal_latency (0)
, _initial_delay (0)
, _default_type (default_type)
, _remote_control_id (0)
, _in_configure_processors (false)
+ , _custom_meter_position_noted (false)
+ , _last_custom_meter_was_at_end (false)
{
processor_max_streams.reset();
- order_keys[N_("signal")] = order_key_cnt++;
}
int
/* panning */
if (!(_flags & Route::MonitorOut)) {
- Pannable* p = new Pannable (_session);
-#ifdef BOOST_SP_ENABLE_DEBUG_HOOKS
- boost_debug_shared_ptr_mark_interesting (p, "Pannable");
-#endif
- _pannable.reset (p);
+ _pannable.reset (new Pannable (_session));
}
/* input and output objects */
_input->changed.connect_same_thread (*this, boost::bind (&Route::input_change_handler, this, _1, _2));
_input->PortCountChanging.connect_same_thread (*this, boost::bind (&Route::input_port_count_changing, this, _1));
+ _output->changed.connect_same_thread (*this, boost::bind (&Route::output_change_handler, this, _1, _2));
+
/* add amp processor */
_amp.reset (new Amp (_session));
{
/* run a configure so that the invisible processors get set up */
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
configure_processors (0);
}
be half-destroyed by now
*/
- Glib::RWLock::WriterLock lm (_processor_lock);
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
(*i)->drop_references ();
}
void
Route::set_remote_control_id (uint32_t id, bool notify_class_listeners)
{
- if (id != _remote_control_id) {
+ if (Config->get_remote_model() != UserOrdered) {
+ return;
+ }
+
+ if (id < 1) {
+ error << _("Remote Control ID's start at one, not zero") << endmsg;
+ return;
+ }
+
+ /* force IDs for master/monitor busses and prevent
+ any other route from accidentally getting these IDs
+ (i.e. legacy sessions)
+ */
+
+ if (is_master() && id != MasterBusRemoteControlID) {
+ id = MasterBusRemoteControlID;
+ }
+
+ if (is_monitor() && id != MonitorBusRemoteControlID) {
+ id = MonitorBusRemoteControlID;
+ }
+
+ /* don't allow it to collide */
+
+ if (!is_master () && !is_monitor() &&
+ (id == MasterBusRemoteControlID || id == MonitorBusRemoteControlID)) {
+ id += MonitorBusRemoteControlID;
+ }
+
+ if (id != remote_control_id()) {
_remote_control_id = id;
RemoteControlIDChanged ();
+
if (notify_class_listeners) {
RemoteControlIDChange ();
}
uint32_t
Route::remote_control_id() const
{
+ if (is_master()) {
+ return MasterBusRemoteControlID;
+ }
+
+ if (is_monitor()) {
+ return MonitorBusRemoteControlID;
+ }
+
return _remote_control_id;
}
-int32_t
-Route::order_key (std::string const & name) const
+bool
+Route::has_order_key (RouteSortOrderKey key) const
{
- OrderKeys::const_iterator i = order_keys.find (name);
+ return (order_keys.find (key) != order_keys.end());
+}
+
+uint32_t
+Route::order_key (RouteSortOrderKey key) const
+{
+ OrderKeys::const_iterator i = order_keys.find (key);
+
if (i == order_keys.end()) {
- return -1;
+ return 0;
}
return i->second;
}
void
-Route::set_order_key (std::string const & name, int32_t n)
+Route::sync_order_keys (RouteSortOrderKey base)
{
- bool changed = false;
+ /* this is called after changes to 1 or more route order keys have been
+ * made, and we want to sync up.
+ */
- /* This method looks more complicated than it should, but
- it's important that we don't emit order_key_changed unless
- it actually has, as expensive things happen on receipt of that
- signal.
- */
+ OrderKeys::iterator i = order_keys.find (base);
- if (order_keys.find(name) == order_keys.end() || order_keys[name] != n) {
- order_keys[name] = n;
- changed = true;
+ if (i == order_keys.end()) {
+ return;
}
- if (Config->get_sync_all_route_ordering()) {
- for (OrderKeys::iterator x = order_keys.begin(); x != order_keys.end(); ++x) {
- if (x->second != n) {
- x->second = n;
- changed = true;
- }
- }
- }
+ for (OrderKeys::iterator k = order_keys.begin(); k != order_keys.end(); ++k) {
- if (changed) {
- order_key_changed (); /* EMIT SIGNAL */
- _session.set_dirty ();
+ if (k->first != base) {
+ DEBUG_TRACE (DEBUG::OrderKeys, string_compose ("%1 set key for %2 to %3 from %4\n",
+ name(),
+ enum_2_string (k->first),
+ i->second,
+ enum_2_string (base)));
+
+ k->second = i->second;
+ }
}
}
-/** Set all order keys to be the same as that for `base', if such a key
- * exists in this route.
- * @param base Base key.
- */
void
-Route::sync_order_keys (std::string const & base)
+Route::set_remote_control_id_from_order_key (RouteSortOrderKey key, uint32_t rid)
{
- if (order_keys.empty()) {
+ if (is_master() || is_monitor() || is_hidden()) {
+ /* hard-coded remote IDs, or no remote ID */
return;
}
- OrderKeys::iterator i;
- int32_t key;
-
- if ((i = order_keys.find (base)) == order_keys.end()) {
- /* key doesn't exist, use the first existing key (during session initialization) */
- i = order_keys.begin();
- key = i->second;
- ++i;
- } else {
- /* key exists - use it and reset all others (actually, itself included) */
- key = i->second;
- i = order_keys.begin();
+ if (_remote_control_id != rid) {
+ DEBUG_TRACE (DEBUG::OrderKeys, string_compose ("%1: set edit-based RID to %2\n", name(), rid));
+ _remote_control_id = rid;
+ RemoteControlIDChanged (); /* EMIT SIGNAL (per-route) */
}
- bool changed = false;
+ /* don't emit the class-level RID signal RemoteControlIDChange here,
+ leave that to the entity that changed the order key, so that we
+ don't get lots of emissions for no good reasons (e.g. when changing
+ all route order keys).
- for (; i != order_keys.end(); ++i) {
- if (i->second != key) {
- i->second = key;
- changed = true;
- }
- }
+ See Session::sync_remote_id_from_order_keys() for the (primary|only)
+ spot where that is emitted.
+ */
+}
- if (changed) {
- order_key_changed (); /* EMIT SIGNAL */
+void
+Route::set_order_key (RouteSortOrderKey key, uint32_t n)
+{
+ OrderKeys::iterator i = order_keys.find (key);
+
+ if (i != order_keys.end() && i->second == n) {
+ return;
}
+
+ order_keys[key] = n;
+
+ DEBUG_TRACE (DEBUG::OrderKeys, string_compose ("%1 order key %2 set to %3\n",
+ name(), enum_2_string (key), order_key (key)));
+
+ _session.set_dirty ();
}
string
void
Route::process_output_buffers (BufferSet& bufs,
framepos_t start_frame, framepos_t end_frame, pframes_t nframes,
- bool /*with_processors*/, int declick,
- bool gain_automation_ok)
+ int declick, bool gain_automation_ok)
{
- bool monitor = should_monitor ();
-
- bufs.is_silent (false);
+ bufs.set_is_silent (false);
/* figure out if we're going to use gain automation */
if (gain_automation_ok) {
+ _amp->set_gain_automation_buffer (_session.gain_automation_buffer ());
_amp->setup_gain_automation (start_frame, end_frame, nframes);
} else {
_amp->apply_gain_automation (false);
}
- /* tell main outs what to do about monitoring */
- _main_outs->no_outs_cuz_we_no_monitor (!monitor);
+ /* Tell main outs what to do about monitoring. We do this so that
+ on a transition between monitoring states we get a de-clicking gain
+ change in the _main_outs delivery.
+ */
+ _main_outs->no_outs_cuz_we_no_monitor (monitoring_state () == MonitoringSilence);
/* -------------------------------------------------------------------------------------------
and go ....
----------------------------------------------------------------------------------------- */
+ /* set this to be true if the meter will already have been ::run() earlier */
+ bool const meter_already_run = metering_state() == MeteringInput;
+
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- if (boost::dynamic_pointer_cast<UnknownProcessor> (*i)) {
- break;
+ if (meter_already_run && boost::dynamic_pointer_cast<PeakMeter> (*i)) {
+ /* don't ::run() the meter, otherwise it will have its previous peak corrupted */
+ continue;
}
#ifndef NDEBUG
/* if it has any inputs, make sure they match */
- if ((*i)->input_streams() != ChanCount::ZERO) {
+ if (boost::dynamic_pointer_cast<UnknownProcessor> (*i) == 0 && (*i)->input_streams() != ChanCount::ZERO) {
if (bufs.count() != (*i)->input_streams()) {
- cerr << _name << " bufs = " << bufs.count()
- << " input for " << (*i)->name() << " = " << (*i)->input_streams()
- << endl;
- abort ();
+ DEBUG_TRACE (
+ DEBUG::Processors, string_compose (
+ "%1 bufs = %2 input for %3 = %4\n",
+ _name, bufs.count(), (*i)->name(), (*i)->input_streams()
+ )
+ );
+ continue;
}
}
#endif
+
/* should we NOT run plugins here if the route is inactive?
do we catch route != active somewhere higher?
*/
}
write_out_of_band_data (bufs, start_frame, end_frame, nframes);
- process_output_buffers (bufs, start_frame, end_frame, nframes, true, declick, true);
+ process_output_buffers (bufs, start_frame, end_frame, nframes, declick, true);
}
void
Route::passthru_silence (framepos_t start_frame, framepos_t end_frame, pframes_t nframes, int declick)
{
BufferSet& bufs (_session.get_silent_buffers (n_process_buffers()));
+
bufs.set_count (_input->n_ports());
write_out_of_band_data (bufs, start_frame, end_frame, nframes);
- process_output_buffers (bufs, start_frame, end_frame, nframes, true, declick, false);
+ process_output_buffers (bufs, start_frame, end_frame, nframes, declick, false);
}
void
return;
}
+ if (_route_group && src != _route_group && _route_group->is_active() && _route_group->is_solo()) {
+ _route_group->foreach_route (boost::bind (&Route::set_listen, _1, yn, _route_group));
+ return;
+ }
+
if (_monitor_send) {
if (yn != _monitor_send->active()) {
if (yn) {
}
bool sends_only;
- bool does_feed = direct_feeds (*i, &sends_only); // we will recurse anyway, so don't use ::feeds()
+ bool does_feed = direct_feeds_according_to_graph (*i, &sends_only); // we will recurse anyway, so don't use ::feeds()
if (does_feed && !sends_only) {
(*i)->set_solo_isolated (yn, (*i)->route_group());
if (muted() != yn) {
_mute_master->set_muted_by_self (yn);
+ /* allow any derived classes to respond to the mute change
+ before anybody else knows about it.
+ */
+ act_on_mute ();
+ /* tell everyone else */
mute_changed (src); /* EMIT SIGNAL */
_mute_control->Changed (); /* EMIT SIGNAL */
}
cerr << name << " {" << endl;
for (list<boost::shared_ptr<Processor> >::const_iterator p = procs.begin();
p != procs.end(); ++p) {
- cerr << "\t" << (*p)->name() << " ID = " << (*p)->id() << endl;
+ cerr << "\t" << (*p)->name() << " ID = " << (*p)->id() << " @ " << (*p) << endl;
}
cerr << "}" << endl;
}
#endif
-int
-Route::add_processor (boost::shared_ptr<Processor> processor, Placement placement, ProcessorStreams* err, bool activation_allowed)
+/** Supposing that we want to insert a Processor at a given Placement, return
+ * the processor to add the new one before (or 0 to add at the end).
+ */
+boost::shared_ptr<Processor>
+Route::before_processor_for_placement (Placement p)
{
- ProcessorList::iterator loc;
-
- /* XXX this is not thread safe - we don't hold the lock across determining the iter
- to add before and actually doing the insertion. dammit.
- */
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
- if (placement == PreFader) {
+ ProcessorList::iterator loc;
+
+ if (p == PreFader) {
/* generic pre-fader: insert immediately before the amp */
loc = find (_processors.begin(), _processors.end(), _amp);
} else {
loc = find (_processors.begin(), _processors.end(), _main_outs);
}
- return add_processor (processor, loc, err, activation_allowed);
+ return loc != _processors.end() ? *loc : boost::shared_ptr<Processor> ();
+}
+
+/** Supposing that we want to insert a Processor at a given index, return
+ * the processor to add the new one before (or 0 to add at the end).
+ */
+boost::shared_ptr<Processor>
+Route::before_processor_for_index (int index)
+{
+ if (index == -1) {
+ return boost::shared_ptr<Processor> ();
+ }
+
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
+
+ ProcessorList::iterator i = _processors.begin ();
+ int j = 0;
+ while (i != _processors.end() && j < index) {
+ if ((*i)->display_to_user()) {
+ ++j;
+ }
+
+ ++i;
+ }
+
+ return (i != _processors.end() ? *i : boost::shared_ptr<Processor> ());
+}
+
+/** Add a processor either pre- or post-fader
+ * @return 0 on success, non-0 on failure.
+ */
+int
+Route::add_processor (boost::shared_ptr<Processor> processor, Placement placement, ProcessorStreams* err, bool activation_allowed)
+{
+ return add_processor (processor, before_processor_for_placement (placement), err, activation_allowed);
}
+/** Add a processor to a route such that it ends up with a given index into the visible processors.
+ * @param index Index to add the processor at, or -1 to add at the end of the list.
+ * @return 0 on success, non-0 on failure.
+ */
+int
+Route::add_processor_by_index (boost::shared_ptr<Processor> processor, int index, ProcessorStreams* err, bool activation_allowed)
+{
+ return add_processor (processor, before_processor_for_index (index), err, activation_allowed);
+}
+
/** Add a processor to the route.
- * @param iter an iterator in _processors; the new processor will be inserted immediately before this location.
+ * @param before An existing processor in the list, or 0; the new processor will be inserted immediately before it (or at the end).
+ * @return 0 on success, non-0 on failure.
*/
int
-Route::add_processor (boost::shared_ptr<Processor> processor, ProcessorList::iterator iter, ProcessorStreams* err, bool activation_allowed)
+Route::add_processor (boost::shared_ptr<Processor> processor, boost::shared_ptr<Processor> before, ProcessorStreams* err, bool activation_allowed)
{
assert (processor != _meter);
assert (processor != _main_outs);
}
{
- Glib::RWLock::WriterLock lm (_processor_lock);
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
ProcessorState pstate (this);
boost::shared_ptr<PluginInsert> pi;
boost::shared_ptr<PortInsert> porti;
- ProcessorList::iterator loc = find(_processors.begin(), _processors.end(), processor);
-
if (processor == _amp) {
- // Ensure only one amp is in the list at any time
- if (loc != _processors.end()) {
- if (iter == loc) { // Already in place, do nothing
+ /* Ensure that only one amp is in the list at any time */
+ ProcessorList::iterator check = find (_processors.begin(), _processors.end(), processor);
+ if (check != _processors.end()) {
+ if (before == _amp) {
+ /* Already in position; all is well */
return 0;
- } else { // New position given, relocate
- _processors.erase (loc);
+ } else {
+ _processors.erase (check);
}
}
+ }
- } else {
- if (loc != _processors.end()) {
- cerr << "ERROR: Processor added to route twice!" << endl;
+ assert (find (_processors.begin(), _processors.end(), processor) == _processors.end ());
+
+ ProcessorList::iterator loc;
+ if (before) {
+ /* inserting before a processor; find it */
+ loc = find (_processors.begin(), _processors.end(), before);
+ if (loc == _processors.end ()) {
+ /* Not found */
return 1;
}
-
- loc = iter;
+ } else {
+ /* inserting at end */
+ loc = _processors.end ();
}
_processors.insert (loc, processor);
// configure redirect ports properly, etc.
{
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
if (configure_processors_unlocked (err)) {
pstate.restore ();
_output->set_user_latency (0);
}
+ reset_instrument_info ();
processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
set_processor_positions ();
if (prop->value() == "ladspa" || prop->value() == "Ladspa" ||
prop->value() == "lv2" ||
prop->value() == "vst" ||
+ prop->value() == "lxvst" ||
prop->value() == "audiounit") {
processor.reset (new PluginInsert (_session));
}
{
- Glib::RWLock::WriterLock lm (_processor_lock);
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
ProcessorState pstate (this);
for (ProcessorList::const_iterator i = others.begin(); i != others.end(); ++i) {
}
{
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
if (configure_processors_unlocked (err)) {
pstate.restore ();
configure_processors_unlocked (0); // it worked before we tried to add it ...
_output->set_user_latency (0);
}
+ reset_instrument_info ();
processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
set_processor_positions ();
void
Route::disable_processors (Placement p)
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
ProcessorList::iterator start, end;
placement_range(p, start, end);
void
Route::disable_processors ()
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
(*i)->deactivate ();
void
Route::disable_plugins (Placement p)
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
ProcessorList::iterator start, end;
placement_range(p, start, end);
void
Route::disable_plugins ()
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
if (boost::dynamic_pointer_cast<PluginInsert> (*i)) {
void
Route::ab_plugins (bool forward)
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
if (forward) {
}
{
- Glib::RWLock::WriterLock lm (_processor_lock);
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
ProcessorList new_list;
ProcessorStreams err;
bool seen_amp = false;
_processors = new_list;
{
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
configure_processors_unlocked (&err); // this can't fail
}
}
processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
set_processor_positions ();
+ reset_instrument_info ();
+
if (!already_deleting) {
_session.clear_deletion_in_progress();
}
}
int
-Route::remove_processor (boost::shared_ptr<Processor> processor, ProcessorStreams* err)
+Route::remove_processor (boost::shared_ptr<Processor> processor, ProcessorStreams* err, bool need_process_lock)
{
+ // TODO once the export point can be configured properly, do something smarter here
+ if (processor == _capturing_processor) {
+ _capturing_processor.reset();
+ }
+
/* these can never be removed */
if (processor == _amp || processor == _meter || processor == _main_outs) {
processor_max_streams.reset();
{
- Glib::RWLock::WriterLock lm (_processor_lock);
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
ProcessorState pstate (this);
ProcessorList::iterator i;
boost::shared_ptr<IOProcessor> iop;
if ((iop = boost::dynamic_pointer_cast<IOProcessor> (*i)) != 0) {
- if (iop->input()) {
- iop->input()->disconnect (this);
- }
- if (iop->output()) {
- iop->output()->disconnect (this);
- }
+ iop->disconnect ();
}
i = _processors.erase (i);
if (!removed) {
/* what? */
return 1;
- }
+ }
- {
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ if (need_process_lock) {
+ Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ if (configure_processors_unlocked (err)) {
+ pstate.restore ();
+ /* we know this will work, because it worked before :) */
+ configure_processors_unlocked (0);
+ return -1;
+ }
+ } else {
if (configure_processors_unlocked (err)) {
pstate.restore ();
/* we know this will work, because it worked before :) */
}
}
+ reset_instrument_info ();
processor->drop_references ();
processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
set_processor_positions ();
processor_max_streams.reset();
{
- Glib::RWLock::WriterLock lm (_processor_lock);
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
ProcessorState pstate (this);
ProcessorList::iterator i;
_output->set_user_latency (0);
{
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
if (configure_processors_unlocked (err)) {
pstate.restore ();
(*i)->drop_references ();
}
+ reset_instrument_info ();
processors_changed (RouteProcessorChange ()); /* EMIT SIGNAL */
set_processor_positions ();
return 0;
}
+void
+Route::reset_instrument_info ()
+{
+ boost::shared_ptr<Processor> instr = the_instrument();
+ _instrument_info.set_internal_instrument (instr);
+}
+
/** Caller must hold process lock */
int
Route::configure_processors (ProcessorStreams* err)
assert (!AudioEngine::instance()->process_lock().trylock());
if (!_in_configure_processors) {
- Glib::RWLock::WriterLock lm (_processor_lock);
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
return configure_processors_unlocked (err);
}
list<pair<ChanCount, ChanCount> >
Route::try_configure_processors (ChanCount in, ProcessorStreams* err)
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
return try_configure_processors_unlocked (in, err);
}
return 0;
}
-void
-Route::all_processors_flip ()
-{
- Glib::RWLock::ReaderLock lm (_processor_lock);
-
- if (_processors.empty()) {
- return;
- }
-
- bool first_is_on = _processors.front()->active();
-
- for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- if (first_is_on) {
- (*i)->deactivate ();
- } else {
- (*i)->activate ();
- }
- }
-
- _session.set_dirty ();
-}
-
-/** Set all processors with a given placement to a given active state.
- * @param p Placement of processors to change.
- * @param state New active state for those processors.
+/** Set all visible processors to a given active state (except Fader, whose state is not changed)
+ * @param state New active state for those processors.
*/
void
-Route::all_processors_active (Placement p, bool state)
+Route::all_visible_processors_active (bool state)
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
if (_processors.empty()) {
return;
}
- ProcessorList::iterator start, end;
- placement_range(p, start, end);
-
- bool before_amp = true;
+
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- if ((*i) == _amp) {
- before_amp = false;
+ if (!(*i)->display_to_user() || boost::dynamic_pointer_cast<Amp> (*i)) {
continue;
}
- if (p == PreFader && before_amp) {
- if (state) {
- (*i)->activate ();
- } else {
- (*i)->deactivate ();
- }
+
+ if (state) {
+ (*i)->activate ();
+ } else {
+ (*i)->deactivate ();
}
}
_session.set_dirty ();
}
-bool
-Route::processor_is_prefader (boost::shared_ptr<Processor> p)
-{
- bool pre_fader = true;
- Glib::RWLock::ReaderLock lm (_processor_lock);
-
- for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
-
- /* semantic note: if p == amp, we want to return true, so test
- for equality before checking if this is the amp
- */
-
- if ((*i) == p) {
- break;
- }
-
- if ((*i) == _amp) {
- pre_fader = false;
- break;
- }
- }
-
- return pre_fader;
-}
-
int
Route::reorder_processors (const ProcessorList& new_order, ProcessorStreams* err)
{
*/
{
- Glib::RWLock::WriterLock lm (_processor_lock);
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
ProcessorState pstate (this);
ProcessorList::iterator oiter;
_processors.insert (oiter, as_it_will_be.begin(), as_it_will_be.end());
+ /* If the meter is in a custom position, find it and make a rough note of its position */
+ maybe_note_meter_position ();
+
{
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
if (configure_processors_unlocked (err)) {
pstate.restore ();
OrderKeys::iterator x = order_keys.begin();
while (x != order_keys.end()) {
- order_string += string ((*x).first);
+ order_string += enum_2_string ((*x).first);
order_string += '=';
- snprintf (buf, sizeof(buf), "%ld", (*x).second);
+ snprintf (buf, sizeof(buf), "%" PRId32, (*x).second);
order_string += buf;
++x;
}
for (i = _processors.begin(); i != _processors.end(); ++i) {
+ if (!full_state) {
+ /* template save: do not include internal sends functioning as
+ aux sends because the chance of the target ID
+ in the session where this template is used
+ is not very likely.
+
+ similarly, do not save listen sends which connect to
+ the monitor section, because these will always be
+ added if necessary.
+ */
+ boost::shared_ptr<InternalSend> is;
+
+ if ((is = boost::dynamic_pointer_cast<InternalSend> (*i)) != 0) {
+ if (is->role() == Delivery::Aux || is->role() == Delivery::Listen) {
+ continue;
+ }
+ }
+ }
node->add_child_nocopy((*i)->state (full_state));
}
- if (_extra_xml){
+ if (_extra_xml) {
node->add_child_copy (*_extra_xml);
}
+ if (_custom_meter_position_noted) {
+ boost::shared_ptr<Processor> after = _processor_after_last_custom_meter.lock ();
+ if (after) {
+ after->id().print (buf, sizeof (buf));
+ node->add_property (X_("processor-after-last-custom-meter"), buf);
+ }
+
+ node->add_property (X_("last-custom-meter-was-at-end"), _last_custom_meter_was_at_end ? "yes" : "no");
+ }
+
return *node;
}
int
Route::set_state (const XMLNode& node, int version)
-{
- return _set_state (node, version, true);
-}
-
-int
-Route::_set_state (const XMLNode& node, int version, bool /*call_base*/)
{
if (version < 3000) {
- return _set_state_2X (node, version);
+ return set_state_2X (node, version);
}
XMLNodeList nlist;
Route::set_name (prop->value());
}
- if ((prop = node.property ("id")) != 0) {
- _id = prop->value ();
- }
+ set_id (node);
if ((prop = node.property (X_("flags"))) != 0) {
_flags = Flag (string_2_enum (prop->value(), _flags));
}
}
+ if ((prop = node.property (X_("meter-point"))) != 0) {
+ MeterPoint mp = MeterPoint (string_2_enum (prop->value (), _meter_point));
+ set_meter_point (mp, true);
+ if (_meter) {
+ _meter->set_display_to_user (_meter_point == MeterCustom);
+ }
+ }
+
set_processor_state (processor_state);
if ((prop = node.property ("self-solo")) != 0) {
set_active (yn, this);
}
- if ((prop = node.property (X_("meter-point"))) != 0) {
- MeterPoint mp = MeterPoint (string_2_enum (prop->value (), _meter_point));
- set_meter_point (mp, true);
- if (_meter) {
- _meter->set_display_to_user (_meter_point == MeterCustom);
- }
- }
-
if ((prop = node.property (X_("order-keys"))) != 0) {
int32_t n;
error << string_compose (_("badly formed order key string in state file! [%1] ... ignored."), remaining)
<< endmsg;
} else {
- set_order_key (remaining.substr (0, equal), n);
+ string keyname = remaining.substr (0, equal);
+ RouteSortOrderKey sk;
+
+ if (keyname == "signal") {
+ sk = MixerSort;
+ } else if (keyname == "editor") {
+ sk = EditorSort;
+ } else {
+ sk = (RouteSortOrderKey) string_2_enum (remaining.substr (0, equal), sk);
+ }
+
+ set_order_key (sk, n);
}
}
}
}
+ if ((prop = node.property (X_("processor-after-last-custom-meter"))) != 0) {
+ PBD::ID id (prop->value ());
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
+ ProcessorList::const_iterator i = _processors.begin ();
+ while (i != _processors.end() && (*i)->id() != id) {
+ ++i;
+ }
+
+ if (i != _processors.end ()) {
+ _processor_after_last_custom_meter = *i;
+ _custom_meter_position_noted = true;
+ }
+ }
+
+ if ((prop = node.property (X_("last-custom-meter-was-at-end"))) != 0) {
+ _last_custom_meter_was_at_end = string_is_affirmative (prop->value ());
+ }
+
for (niter = nlist.begin(); niter != nlist.end(); ++niter){
child = *niter;
} else if (child->name() == Controllable::xml_node_name && (prop = child->property("name")) != 0) {
if (prop->value() == "solo") {
_solo_control->set_state (*child, version);
+ } else if (prop->value() == "mute") {
+ _mute_control->set_state (*child, version);
}
} else if (child->name() == X_("RemoteControl")) {
}
int
-Route::_set_state_2X (const XMLNode& node, int version)
+Route::set_state_2X (const XMLNode& node, int version)
{
XMLNodeList nlist;
XMLNodeConstIterator niter;
}
if ((prop = node.property (X_("flags"))) != 0) {
- _flags = Flag (string_2_enum (prop->value(), _flags));
+ string f = prop->value ();
+ boost::replace_all (f, "ControlOut", "MonitorOut");
+ _flags = Flag (string_2_enum (f, _flags));
} else {
_flags = Flag (0);
}
error << string_compose (_("badly formed order key string in state file! [%1] ... ignored."), remaining)
<< endmsg;
} else {
- set_order_key (remaining.substr (0, equal), n);
+ string keyname = remaining.substr (0, equal);
+ RouteSortOrderKey sk;
+
+ if (keyname == "signal") {
+ sk = MixerSort;
+ } else if (keyname == "editor") {
+ sk = EditorSort;
+ } else {
+ sk = (RouteSortOrderKey) string_2_enum (remaining.substr (0, equal), sk);
+ }
+
+ set_order_key (sk, n);
}
}
Route::set_name (prop->value ());
}
- if ((prop = child->property (X_("id"))) != 0) {
- _id = prop->value ();
- }
+ set_id (*child);
if ((prop = child->property (X_("active"))) != 0) {
bool yn = string_is_affirmative (prop->value());
new_order.push_back (_amp);
} else if (prop->value() == "meter") {
_meter->set_state (**niter, Stateful::current_state_version);
+ new_order.push_back (_meter);
} else if (prop->value() == "main-outs") {
_main_outs->set_state (**niter, Stateful::current_state_version);
} else if (prop->value() == "intreturn") {
}
_monitor_control->set_state (**niter, Stateful::current_state_version);
} else if (prop->value() == "capture") {
- _capturing_processor.reset (new CapturingProcessor (_session));
+ /* CapturingProcessor should never be restored, it's always
+ added explicitly when needed */
} else {
ProcessorList::iterator o;
} else if (prop->value() == "ladspa" || prop->value() == "Ladspa" ||
prop->value() == "lv2" ||
prop->value() == "vst" ||
+ prop->value() == "lxvst" ||
prop->value() == "audiounit") {
processor.reset (new PluginInsert(_session));
}
{
- Glib::RWLock::WriterLock lm (_processor_lock);
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
_processors = new_order;
if (must_configure) {
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
configure_processors_unlocked (0);
}
}
}
+ reset_instrument_info ();
processors_changed (RouteProcessorChange ());
set_processor_positions ();
}
void
Route::silence (framecnt_t nframes)
{
- Glib::RWLock::ReaderLock lm (_processor_lock, Glib::TRY_LOCK);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
if (!lm.locked()) {
return;
}
void
Route::add_send_to_internal_return (InternalSend* send)
{
- Glib::RWLock::ReaderLock rm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock rm (_processor_lock);
for (ProcessorList::const_iterator x = _processors.begin(); x != _processors.end(); ++x) {
boost::shared_ptr<InternalReturn> d = boost::dynamic_pointer_cast<InternalReturn>(*x);
void
Route::remove_send_from_internal_return (InternalSend* send)
{
- Glib::RWLock::ReaderLock rm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock rm (_processor_lock);
for (ProcessorList::const_iterator x = _processors.begin(); x != _processors.end(); ++x) {
boost::shared_ptr<InternalReturn> d = boost::dynamic_pointer_cast<InternalReturn>(*x);
}
}
-/** Add a monitor send (if we don't already have one) but don't activate it */
-int
-Route::listen_via_monitor ()
+void
+Route::enable_monitor_send ()
{
- /* master never sends to control outs */
+ /* Caller must hold process lock */
+ assert (!AudioEngine::instance()->process_lock().trylock());
+
+ /* master never sends to monitor section via the normal mechanism */
assert (!is_master ());
/* make sure we have one */
}
/* set it up */
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
configure_processors (0);
-
- return 0;
}
-/** Add an internal send to a route.
+/** Add an aux send to a route.
* @param route route to send to.
- * @param placement placement for the send.
+ * @param before Processor to insert before, or 0 to insert at the end.
*/
int
-Route::listen_via (boost::shared_ptr<Route> route, Placement placement)
+Route::add_aux_send (boost::shared_ptr<Route> route, boost::shared_ptr<Processor> before)
{
assert (route != _session.monitor_out ());
{
- Glib::RWLock::ReaderLock rm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock rm (_processor_lock);
for (ProcessorList::iterator x = _processors.begin(); x != _processors.end(); ++x) {
}
try {
- boost::shared_ptr<InternalSend> listener (new InternalSend (_session, _pannable, _mute_master, route, Delivery::Aux));
- add_processor (listener, placement);
+
+ boost::shared_ptr<InternalSend> listener;
+
+ {
+ Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ listener.reset (new InternalSend (_session, _pannable, _mute_master, route, Delivery::Aux));
+ }
+
+ add_processor (listener, before);
} catch (failed_constructor& err) {
return -1;
}
void
-Route::drop_listen (boost::shared_ptr<Route> route)
+Route::remove_aux_or_listen (boost::shared_ptr<Route> route)
{
ProcessorStreams err;
ProcessorList::iterator tmp;
- Glib::RWLock::ReaderLock rl(_processor_lock);
- rl.acquire ();
-
- again:
- for (ProcessorList::iterator x = _processors.begin(); x != _processors.end(); ) {
-
- boost::shared_ptr<InternalSend> d = boost::dynamic_pointer_cast<InternalSend>(*x);
-
- if (d && d->target_route() == route) {
- rl.release ();
- remove_processor (*x, &err);
- rl.acquire ();
+ {
+ Glib::Threads::RWLock::ReaderLock rl(_processor_lock);
- /* list could have been demolished while we dropped the lock
- so start over.
- */
+ /* have to do this early because otherwise processor reconfig
+ * will put _monitor_send back in the list
+ */
- goto again;
+ if (route == _session.monitor_out()) {
+ _monitor_send.reset ();
}
- }
- rl.release ();
+ again:
+ for (ProcessorList::iterator x = _processors.begin(); x != _processors.end(); ++x) {
+
+ boost::shared_ptr<InternalSend> d = boost::dynamic_pointer_cast<InternalSend>(*x);
+
+ if (d && d->target_route() == route) {
+ rl.release ();
+ remove_processor (*x, &err, false);
+ rl.acquire ();
- if (route == _session.monitor_out()) {
- _monitor_send.reset ();
+ /* list could have been demolished while we dropped the lock
+ so start over.
+ */
+
+ goto again;
+ }
+ }
}
}
}
bool
-Route::direct_feeds (boost::shared_ptr<Route> other, bool* only_send)
+Route::direct_feeds_according_to_reality (boost::shared_ptr<Route> other, bool* via_send_only)
{
DEBUG_TRACE (DEBUG::Graph, string_compose ("Feeds? %1\n", _name));
if (_output->connected_to (other->input())) {
DEBUG_TRACE (DEBUG::Graph, string_compose ("\tdirect FEEDS %2\n", other->name()));
- if (only_send) {
- *only_send = false;
+ if (via_send_only) {
+ *via_send_only = false;
}
return true;
if ((iop = boost::dynamic_pointer_cast<IOProcessor>(*r)) != 0) {
if (iop->feeds (other)) {
DEBUG_TRACE (DEBUG::Graph, string_compose ("\tIOP %1 does feed %2\n", iop->name(), other->name()));
- if (only_send) {
- *only_send = true;
+ if (via_send_only) {
+ *via_send_only = true;
}
return true;
} else {
return false;
}
+bool
+Route::direct_feeds_according_to_graph (boost::shared_ptr<Route> other, bool* via_send_only)
+{
+ return _session._current_route_graph.has (shared_from_this (), other, via_send_only);
+}
+
/** Called from the (non-realtime) butler thread when the transport is stopped */
void
Route::nonrealtime_handle_transport_stopped (bool /*abort_ignored*/, bool did_locate, bool can_flush_processors)
framepos_t now = _session.transport_frame();
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
-
- if (!did_locate) {
- automation_snapshot (now, true);
- }
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
Automatable::transport_stopped (now);
_roll_delay = _initial_delay;
}
-/** Called with the process lock held if change contains ConfigurationChanged */
void
Route::input_change_handler (IOChange change, void * /*src*/)
{
+ bool need_to_queue_solo_change = true;
+
if ((change.type & IOChange::ConfigurationChanged)) {
+ /* This is called with the process lock held if change
+ contains ConfigurationChanged
+ */
+ need_to_queue_solo_change = false;
configure_processors (0);
_phase_invert.resize (_input->n_ports().n_audio ());
io_changed (); /* EMIT SIGNAL */
}
+
+ if (!_input->connected() && _soloed_by_others_upstream) {
+ if (need_to_queue_solo_change) {
+ _session.cancel_solo_after_disconnect (shared_from_this(), true);
+ } else {
+ cancel_solo_after_disconnect (true);
+ }
+ }
+}
+
+void
+Route::output_change_handler (IOChange change, void * /*src*/)
+{
+ bool need_to_queue_solo_change = true;
+
+ if ((change.type & IOChange::ConfigurationChanged)) {
+ /* This is called with the process lock held if change
+ contains ConfigurationChanged
+ */
+ need_to_queue_solo_change = false;
+ }
+
+ if (!_output->connected() && _soloed_by_others_downstream) {
+ if (need_to_queue_solo_change) {
+ _session.cancel_solo_after_disconnect (shared_from_this(), false);
+ } else {
+ cancel_solo_after_disconnect (false);
+ }
+ }
+}
+
+void
+Route::cancel_solo_after_disconnect (bool upstream)
+{
+ if (upstream) {
+ _soloed_by_others_upstream = 0;
+ } else {
+ _soloed_by_others_downstream = 0;
+ }
+ set_mute_master_solo ();
+ solo_changed (false, this);
}
uint32_t
}
int
-Route::no_roll (pframes_t nframes, framepos_t start_frame, framepos_t end_frame,
- bool session_state_changing, bool /*can_record*/, bool /*rec_monitors_input*/)
+Route::no_roll (pframes_t nframes, framepos_t start_frame, framepos_t end_frame, bool session_state_changing)
{
- Glib::RWLock::ReaderLock lm (_processor_lock, Glib::TRY_LOCK);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
if (!lm.locked()) {
return 0;
}
return 0;
}
-framecnt_t
-Route::check_initial_delay (framecnt_t nframes, framecnt_t& transport_frame)
-{
- if (_roll_delay > nframes) {
-
- _roll_delay -= nframes;
- silence_unlocked (nframes);
- /* transport frame is not legal for caller to use */
- return 0;
-
- } else if (_roll_delay > 0) {
-
- nframes -= _roll_delay;
- silence_unlocked (_roll_delay);
- transport_frame += _roll_delay;
-
- /* shuffle all the port buffers for things that lead "out" of this Route
- to reflect that we just wrote _roll_delay frames of silence.
- */
-
- Glib::RWLock::ReaderLock lm (_processor_lock);
- for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- boost::shared_ptr<IOProcessor> iop = boost::dynamic_pointer_cast<IOProcessor> (*i);
- if (iop) {
- iop->increment_port_buffer_offset (_roll_delay);
- }
- }
- _output->increment_port_buffer_offset (_roll_delay);
-
- _roll_delay = 0;
-
- }
-
- return nframes;
-}
-
int
-Route::roll (pframes_t nframes, framepos_t start_frame, framepos_t end_frame, int declick,
- bool /*can_record*/, bool /*rec_monitors_input*/, bool& /* need_butler */)
+Route::roll (pframes_t nframes, framepos_t start_frame, framepos_t end_frame, int declick, bool& /* need_butler */)
{
- Glib::RWLock::ReaderLock lm (_processor_lock, Glib::TRY_LOCK);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
if (!lm.locked()) {
return 0;
}
- automation_snapshot (_session.transport_frame(), false);
-
if (n_outputs().n_total() == 0) {
return 0;
}
return 0;
}
- framecnt_t unused = 0;
+ framepos_t unused = 0;
if ((nframes = check_initial_delay (nframes, unused)) == 0) {
return 0;
}
int
-Route::silent_roll (pframes_t nframes, framepos_t /*start_frame*/, framepos_t /*end_frame*/,
- bool /*can_record*/, bool /*rec_monitors_input*/, bool& /* need_butler */)
+Route::silent_roll (pframes_t nframes, framepos_t /*start_frame*/, framepos_t /*end_frame*/, bool& /* need_butler */)
{
silence (nframes);
return 0;
}
-void
-Route::toggle_monitor_input ()
-{
- for (PortSet::iterator i = _input->ports().begin(); i != _input->ports().end(); ++i) {
- i->ensure_monitor_input( ! i->monitoring_input());
- }
-}
-
-bool
-Route::has_external_redirects () const
-{
- // FIXME: what about sends? - they don't return a signal back to ardour?
-
- boost::shared_ptr<const PortInsert> pi;
-
- for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
-
- if ((pi = boost::dynamic_pointer_cast<const PortInsert>(*i)) != 0) {
-
- for (PortSet::const_iterator port = pi->output()->ports().begin(); port != pi->output()->ports().end(); ++port) {
-
- string port_name = port->name();
- string client_name = port_name.substr (0, port_name.find(':'));
-
- /* only say "yes" if the redirect is actually in use */
-
- if (client_name != "ardour" && pi->active()) {
- return true;
- }
- }
- }
- }
-
- return false;
-}
-
void
Route::flush_processors ()
{
this is called from the RT audio thread.
*/
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
(*i)->flush ();
return;
}
- _meter_point = p;
-
bool meter_was_visible_to_user = _meter->display_to_user ();
{
- Glib::RWLock::WriterLock lm (_processor_lock);
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
+
+ maybe_note_meter_position ();
+
+ _meter_point = p;
if (_meter_point != MeterCustom) {
setup_invisible_processors ();
- ProcessorList::iterator loc = find (_processors.begin(), _processors.end(), _meter);
+ } else {
- ChanCount m_in;
+ _meter->set_display_to_user (true);
- if (loc == _processors.begin()) {
- m_in = _input->n_ports();
- } else {
- ProcessorList::iterator before = loc;
- --before;
- m_in = (*before)->output_streams ();
+ /* If we have a previous position for the custom meter, try to put it there */
+ if (_custom_meter_position_noted) {
+ boost::shared_ptr<Processor> after = _processor_after_last_custom_meter.lock ();
+
+ if (after) {
+ ProcessorList::iterator i = find (_processors.begin(), _processors.end(), after);
+ if (i != _processors.end ()) {
+ _processors.remove (_meter);
+ _processors.insert (i, _meter);
+ }
+ } else if (_last_custom_meter_was_at_end) {
+ _processors.remove (_meter);
+ _processors.push_back (_meter);
+ }
}
+ }
- _meter->reflect_inputs (m_in);
-
- /* we do not need to reconfigure the processors, because the meter
- (a) is always ready to handle processor_max_streams
- (b) is always an N-in/N-out processor, and thus moving
- it doesn't require any changes to the other processors.
- */
+ /* Set up the meter for its new position */
+ ProcessorList::iterator loc = find (_processors.begin(), _processors.end(), _meter);
+
+ ChanCount m_in;
+
+ if (loc == _processors.begin()) {
+ m_in = _input->n_ports();
} else {
-
- // just make it visible and let the user move it
-
- _meter->set_display_to_user (true);
+ ProcessorList::iterator before = loc;
+ --before;
+ m_in = (*before)->output_streams ();
}
+
+ _meter->reflect_inputs (m_in);
+
+ /* we do not need to reconfigure the processors, because the meter
+ (a) is always ready to handle processor_max_streams
+ (b) is always an N-in/N-out processor, and thus moving
+ it doesn't require any changes to the other processors.
+ */
}
meter_change (); /* EMIT SIGNAL */
Route::listen_position_changed ()
{
{
- Glib::RWLock::WriterLock lm (_processor_lock);
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
ProcessorState pstate (this);
{
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
if (configure_processors_unlocked (0)) {
pstate.restore ();
_capturing_processor->activate ();
{
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
configure_processors (0);
}
}
}
-void
-Route::automation_snapshot (framepos_t now, bool force)
-{
- if (_pannable) {
- _pannable->automation_snapshot (now, force);
- }
-
- for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- (*i)->automation_snapshot (now, force);
- }
-}
-
Route::SoloControllable::SoloControllable (std::string name, boost::shared_ptr<Route> r)
: AutomationControl (r->session(), Evoral::Parameter (SoloAutomation),
boost::shared_ptr<AutomationList>(), name)
(*i)->protect_automation();
}
+/** @param declick 1 to set a pending declick fade-in,
+ * -1 to set a pending declick fade-out
+ */
void
Route::set_pending_declick (int declick)
{
if (_declickable) {
- /* this call is not allowed to turn off a pending declick unless "force" is true */
+ /* this call is not allowed to turn off a pending declick */
if (declick) {
_pending_declick = declick;
}
- // cerr << _name << ": after setting to " << declick << " pending declick = " << _pending_declick << endl;
} else {
_pending_declick = 0;
}
-
}
/** Shift automation forwards from a particular place, thereby inserting time.
/* redirect automation */
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
for (ProcessorList::iterator i = _processors.begin (); i != _processors.end (); ++i) {
set<Evoral::Parameter> parameters = (*i)->what_can_be_automated();
return ret;
}
+/** Set the name of a route in an XML description.
+ * @param node XML <Route> node to set the name in.
+ * @param name New name.
+ */
+void
+Route::set_name_in_state (XMLNode& node, string const & name)
+{
+ node.add_property (X_("name"), name);
+
+ XMLNodeList children = node.children();
+ for (XMLNodeIterator i = children.begin(); i != children.end(); ++i) {
+
+ if ((*i)->name() == X_("IO")) {
+
+ IO::set_name_in_state (**i, name);
+
+ } else if ((*i)->name() == X_("Processor")) {
+
+ XMLProperty* role = (*i)->property (X_("role"));
+ if (role && role->value() == X_("Main")) {
+ (*i)->add_property (X_("name"), name);
+ }
+
+ } else if ((*i)->name() == X_("Diskstream")) {
+
+ (*i)->add_property (X_("playlist"), string_compose ("%1.1", name).c_str());
+ (*i)->add_property (X_("name"), name);
+
+ }
+ }
+}
+
boost::shared_ptr<Send>
Route::internal_send_for (boost::shared_ptr<const Route> target) const
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
boost::shared_ptr<InternalSend> send;
void
Route::meter ()
{
- Glib::RWLock::ReaderLock rm (_processor_lock, Glib::TRY_LOCK);
+ Glib::Threads::RWLock::ReaderLock rm (_processor_lock, Glib::Threads::TRY_LOCK);
assert (_meter);
/* maybe one of our processors does or ... */
- Glib::RWLock::ReaderLock rm (_processor_lock, Glib::TRY_LOCK);
+ Glib::Threads::RWLock::ReaderLock rm (_processor_lock, Glib::Threads::TRY_LOCK);
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
if ((c = boost::dynamic_pointer_cast<AutomationControl>((*i)->control (param))) != 0) {
break;
boost::shared_ptr<Processor>
Route::nth_plugin (uint32_t n)
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
ProcessorList::iterator i;
for (i = _processors.begin(); i != _processors.end(); ++i) {
boost::shared_ptr<Processor>
Route::nth_send (uint32_t n)
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
ProcessorList::iterator i;
for (i = _processors.begin(); i != _processors.end(); ++i) {
bool
Route::has_io_processor_named (const string& name)
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
ProcessorList::iterator i;
for (i = _processors.begin(); i != _processors.end(); ++i) {
void
Route::set_processor_positions ()
{
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
bool had_amp = false;
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
{
list<string> p;
- Glib::RWLock::ReaderLock lm (_processor_lock);
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
if (boost::dynamic_pointer_cast<UnknownProcessor const> (*i)) {
p.push_back ((*i)->name ());
jack_latency_range_t all_connections;
- all_connections.min = ~((jack_nframes_t) 0);
- all_connections.max = 0;
-
- /* iterate over all "from" ports and determine the latency range for all of their
- connections to the "outside" (outside of this Route).
- */
-
- for (PortSet::iterator p = from.begin(); p != from.end(); ++p) {
-
- jack_latency_range_t range;
-
- p->get_connected_latency_range (range, playback);
-
- all_connections.min = min (all_connections.min, range.min);
- all_connections.max = max (all_connections.max, range.max);
+ if (from.empty()) {
+ all_connections.min = 0;
+ all_connections.max = 0;
+ } else {
+ all_connections.min = ~((jack_nframes_t) 0);
+ all_connections.max = 0;
+
+ /* iterate over all "from" ports and determine the latency range for all of their
+ connections to the "outside" (outside of this Route).
+ */
+
+ for (PortSet::iterator p = from.begin(); p != from.end(); ++p) {
+
+ jack_latency_range_t range;
+
+ p->get_connected_latency_range (range, playback);
+
+ all_connections.min = min (all_connections.min, range.min);
+ all_connections.max = max (all_connections.max, range.max);
+ }
}
/* set the "from" port latencies to the max/min range of all their connections */
Route::setup_invisible_processors ()
{
#ifndef NDEBUG
- Glib::RWLock::WriterLock lm (_processor_lock, Glib::TRY_LOCK);
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock, Glib::Threads::TRY_LOCK);
assert (!lm.locked ());
#endif
}
}
-bool
-Route::should_monitor () const
-{
- switch (Config->get_monitoring_model()) {
- case HardwareMonitoring:
- case ExternalMonitoring:
- return !record_enabled() || (_session.config.get_auto_input() && !_session.actively_recording());
- break;
- default:
- break;
- }
-
- return true;
-}
-
void
Route::unpan ()
{
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
- Glib::RWLock::ReaderLock lp (_processor_lock);
+ Glib::Threads::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ Glib::Threads::RWLock::ReaderLock lp (_processor_lock);
_pannable.reset ();
}
}
}
+
+/** If the meter point is `Custom', make a note of where the meter is.
+ * This is so that if the meter point is subsequently set to something else,
+ * and then back to custom, we can put the meter back where it was last time
+ * custom was enabled.
+ *
+ * Must be called with the _processor_lock held.
+ */
+void
+Route::maybe_note_meter_position ()
+{
+ if (_meter_point != MeterCustom) {
+ return;
+ }
+
+ _custom_meter_position_noted = true;
+ for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
+ if (boost::dynamic_pointer_cast<PeakMeter> (*i)) {
+ ProcessorList::iterator j = i;
+ ++j;
+ if (j != _processors.end ()) {
+ _processor_after_last_custom_meter = *j;
+ _last_custom_meter_was_at_end = false;
+ } else {
+ _last_custom_meter_was_at_end = true;
+ }
+ }
+ }
+}
+
+boost::shared_ptr<Processor>
+Route::processor_by_id (PBD::ID id) const
+{
+ Glib::Threads::RWLock::ReaderLock lm (_processor_lock);
+ for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
+ if ((*i)->id() == id) {
+ return *i;
+ }
+ }
+
+ return boost::shared_ptr<Processor> ();
+}
+
+/** @return the monitoring state, or in other words what data we are pushing
+ * into the route (data from the inputs, data from disk or silence)
+ */
+MonitorState
+Route::monitoring_state () const
+{
+ return MonitoringInput;
+}
+
+/** @return what we should be metering; either the data coming from the input
+ * IO or the data that is flowing through the route.
+ */
+MeterState
+Route::metering_state () const
+{
+ return MeteringRoute;
+}
+
+bool
+Route::has_external_redirects () const
+{
+ for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
+
+ /* ignore inactive processors and obviously ignore the main
+ * outs since everything has them and we don't care.
+ */
+
+ if ((*i)->active() && (*i) != _main_outs && (*i)->does_routing()) {
+ return true;;
+ }
+ }
+
+ return false;
+}
+
+boost::shared_ptr<Processor>
+Route::the_instrument () const
+{
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
+ for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
+ if (boost::dynamic_pointer_cast<PluginInsert>(*i)) {
+ if ((*i)->input_streams().n_midi() > 0 &&
+ (*i)->output_streams().n_audio() > 0) {
+ return (*i);
+ }
+ }
+ }
+ return boost::shared_ptr<Processor>();
+}
+
+void
+Route::non_realtime_locate (framepos_t pos)
+{
+ if (_pannable) {
+ _pannable->transport_located (pos);
+ }
+
+ {
+ Glib::Threads::RWLock::WriterLock lm (_processor_lock);
+
+ for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
+ (*i)->transport_located (pos);
+ }
+ }
+}
projects / ardour.git / blobdiff