#include "ardour/session.h"
#include "ardour/timestamps.h"
#include "ardour/utils.h"
-#include "ardour/graph.h"
#include "ardour/unknown_processor.h"
#include "ardour/capturing_processor.h"
Route::Route (Session& sess, string name, Flag flg, DataType default_type)
: SessionObject (sess, name)
, Automatable (sess)
- , GraphNode( sess.route_graph )
+ , GraphNode (sess._process_graph)
, _active (true)
, _signal_latency (0)
, _initial_delay (0)
, _default_type (default_type)
, _remote_control_id (0)
, _in_configure_processors (false)
+ , _custom_meter_position_noted (false)
+ , _last_custom_meter_was_at_end (false)
{
processor_max_streams.reset();
order_keys[N_("signal")] = order_key_cnt++;
+
+ if (is_master()) {
+ set_remote_control_id (MasterBusRemoteControlID);
+ } else if (is_monitor()) {
+ set_remote_control_id (MonitorBusRemoteControlID);
+ }
+
}
int
/* panning */
if (!(_flags & Route::MonitorOut)) {
- Pannable* p = new Pannable (_session);
-#ifdef BOOST_SP_ENABLE_DEBUG_HOOKS
- boost_debug_shared_ptr_mark_interesting (p, "Pannable");
-#endif
- _pannable.reset (p);
+ _pannable.reset (new Pannable (_session));
}
/* input and output objects */
void
Route::set_remote_control_id (uint32_t id, bool notify_class_listeners)
{
+ /* force IDs for master/monitor busses and prevent
+ any other route from accidentally getting these IDs
+ (i.e. legacy sessions)
+ */
+
+ if (is_master() && id != MasterBusRemoteControlID) {
+ id = MasterBusRemoteControlID;
+ }
+
+ if (is_monitor() && id != MonitorBusRemoteControlID) {
+ id = MonitorBusRemoteControlID;
+ }
+
+ /* don't allow it to collide */
+
+ if (!is_master () && !is_monitor() &&
+ (id == MasterBusRemoteControlID || id == MonitorBusRemoteControlID)) {
+ id += MonitorBusRemoteControlID;
+ }
+
if (id != _remote_control_id) {
_remote_control_id = id;
RemoteControlIDChanged ();
void
Route::process_output_buffers (BufferSet& bufs,
framepos_t start_frame, framepos_t end_frame, pframes_t nframes,
- bool /*with_processors*/, int declick,
- bool gain_automation_ok)
+ int declick, bool gain_automation_ok)
{
- bool monitor = should_monitor ();
-
- bufs.is_silent (false);
+ bufs.set_is_silent (false);
/* figure out if we're going to use gain automation */
if (gain_automation_ok) {
_amp->apply_gain_automation (false);
}
- /* tell main outs what to do about monitoring */
- _main_outs->no_outs_cuz_we_no_monitor (!monitor);
+ /* Tell main outs what to do about monitoring. We do this so that
+ on a transition between monitoring states we get a de-clicking gain
+ change in the _main_outs delivery.
+ */
+ _main_outs->no_outs_cuz_we_no_monitor (monitoring_state () == MonitoringSilence);
/* -------------------------------------------------------------------------------------------
and go ....
----------------------------------------------------------------------------------------- */
+ /* set this to be true if the meter will already have been ::run() earlier */
+ bool const meter_already_run = metering_state() == MeteringInput;
+
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
if (boost::dynamic_pointer_cast<UnknownProcessor> (*i)) {
break;
}
+ if (boost::dynamic_pointer_cast<PeakMeter> (*i) && meter_already_run) {
+ /* don't ::run() the meter, otherwise it will have its previous peak corrupted */
+ continue;
+ }
+
#ifndef NDEBUG
/* if it has any inputs, make sure they match */
if ((*i)->input_streams() != ChanCount::ZERO) {
}
}
#endif
+
/* should we NOT run plugins here if the route is inactive?
do we catch route != active somewhere higher?
*/
}
write_out_of_band_data (bufs, start_frame, end_frame, nframes);
- process_output_buffers (bufs, start_frame, end_frame, nframes, true, declick, true);
+ process_output_buffers (bufs, start_frame, end_frame, nframes, declick, true);
}
void
Route::passthru_silence (framepos_t start_frame, framepos_t end_frame, pframes_t nframes, int declick)
{
BufferSet& bufs (_session.get_silent_buffers (n_process_buffers()));
+
bufs.set_count (_input->n_ports());
write_out_of_band_data (bufs, start_frame, end_frame, nframes);
- process_output_buffers (bufs, start_frame, end_frame, nframes, true, declick, false);
+ process_output_buffers (bufs, start_frame, end_frame, nframes, declick, false);
}
void
}
bool sends_only;
- bool does_feed = direct_feeds (*i, &sends_only); // we will recurse anyway, so don't use ::feeds()
+ bool does_feed = direct_feeds_according_to_graph (*i, &sends_only); // we will recurse anyway, so don't use ::feeds()
if (does_feed && !sends_only) {
(*i)->set_solo_isolated (yn, (*i)->route_group());
if (muted() != yn) {
_mute_master->set_muted_by_self (yn);
+ /* allow any derived classes to respond to the mute change
+ before anybody else knows about it.
+ */
+ act_on_mute ();
+ /* tell everyone else */
mute_changed (src); /* EMIT SIGNAL */
_mute_control->Changed (); /* EMIT SIGNAL */
}
}
+/** Add a processor to a route such that it ends up with a given index into the visible processors.
+ * @param index Index to add the processor at, or -1 to add at the end of the list.
+ */
+
+int
+Route::add_processor_by_index (boost::shared_ptr<Processor> processor, int index, ProcessorStreams* err, bool activation_allowed)
+{
+ /* XXX this is not thread safe - we don't hold the lock across determining the iter
+ to add before and actually doing the insertion. dammit.
+ */
+
+ if (index == -1) {
+ return add_processor (processor, _processors.end(), err, activation_allowed);
+ }
+
+ ProcessorList::iterator i = _processors.begin ();
+ int j = 0;
+ while (i != _processors.end() && j < index) {
+ if ((*i)->display_to_user()) {
+ ++j;
+ }
+
+ ++i;
+ }
+
+ return add_processor (processor, i, err, activation_allowed);
+}
+
/** Add a processor to the route.
* @param iter an iterator in _processors; the new processor will be inserted immediately before this location.
*/
}
int
-Route::remove_processor (boost::shared_ptr<Processor> processor, ProcessorStreams* err)
+Route::remove_processor (boost::shared_ptr<Processor> processor, ProcessorStreams* err, bool need_process_lock)
{
/* these can never be removed */
if (!removed) {
/* what? */
return 1;
- }
+ }
- {
+ if (need_process_lock) {
Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ if (configure_processors_unlocked (err)) {
+ pstate.restore ();
+ /* we know this will work, because it worked before :) */
+ configure_processors_unlocked (0);
+ return -1;
+ }
+ } else {
if (configure_processors_unlocked (err)) {
pstate.restore ();
/* we know this will work, because it worked before :) */
return 0;
}
-void
-Route::all_processors_flip ()
-{
- Glib::RWLock::ReaderLock lm (_processor_lock);
-
- if (_processors.empty()) {
- return;
- }
-
- bool first_is_on = _processors.front()->active();
-
- for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- if (first_is_on) {
- (*i)->deactivate ();
- } else {
- (*i)->activate ();
- }
- }
-
- _session.set_dirty ();
-}
-
-/** Set all processors with a given placement to a given active state.
- * @param p Placement of processors to change.
- * @param state New active state for those processors.
+/** Set all visible processors to a given active state (except Fader, whose state is not changed)
+ * @param state New active state for those processors.
*/
void
-Route::all_processors_active (Placement p, bool state)
+Route::all_visible_processors_active (bool state)
{
Glib::RWLock::ReaderLock lm (_processor_lock);
if (_processors.empty()) {
return;
}
- ProcessorList::iterator start, end;
- placement_range(p, start, end);
-
- bool before_amp = true;
+
for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
- if ((*i) == _amp) {
- before_amp = false;
+ if (!(*i)->display_to_user() || boost::dynamic_pointer_cast<Amp> (*i)) {
continue;
}
- if (p == PreFader && before_amp) {
- if (state) {
- (*i)->activate ();
- } else {
- (*i)->deactivate ();
- }
+
+ if (state) {
+ (*i)->activate ();
+ } else {
+ (*i)->deactivate ();
}
}
_session.set_dirty ();
}
-bool
-Route::processor_is_prefader (boost::shared_ptr<Processor> p)
-{
- bool pre_fader = true;
- Glib::RWLock::ReaderLock lm (_processor_lock);
-
- for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
-
- /* semantic note: if p == amp, we want to return true, so test
- for equality before checking if this is the amp
- */
-
- if ((*i) == p) {
- break;
- }
-
- if ((*i) == _amp) {
- pre_fader = false;
- break;
- }
- }
-
- return pre_fader;
-}
-
int
Route::reorder_processors (const ProcessorList& new_order, ProcessorStreams* err)
{
_processors.insert (oiter, as_it_will_be.begin(), as_it_will_be.end());
+ /* If the meter is in a custom position, find it and make a rough note of its position */
+ maybe_note_meter_position ();
+
{
Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
node->add_child_nocopy((*i)->state (full_state));
}
- if (_extra_xml){
+ if (_extra_xml) {
node->add_child_copy (*_extra_xml);
}
+ if (_custom_meter_position_noted) {
+ boost::shared_ptr<Processor> after = _processor_after_last_custom_meter.lock ();
+ if (after) {
+ after->id().print (buf, sizeof (buf));
+ node->add_property (X_("processor-after-last-custom-meter"), buf);
+ }
+
+ node->add_property (X_("last-custom-meter-was-at-end"), _last_custom_meter_was_at_end ? "yes" : "no");
+ }
+
return *node;
}
int
Route::set_state (const XMLNode& node, int version)
-{
- return _set_state (node, version, true);
-}
-
-int
-Route::_set_state (const XMLNode& node, int version, bool /*call_base*/)
{
if (version < 3000) {
- return _set_state_2X (node, version);
+ return set_state_2X (node, version);
}
XMLNodeList nlist;
Route::set_name (prop->value());
}
- if ((prop = node.property ("id")) != 0) {
- _id = prop->value ();
- }
+ set_id (node);
if ((prop = node.property (X_("flags"))) != 0) {
_flags = Flag (string_2_enum (prop->value(), _flags));
}
}
+ if ((prop = node.property (X_("meter-point"))) != 0) {
+ MeterPoint mp = MeterPoint (string_2_enum (prop->value (), _meter_point));
+ set_meter_point (mp, true);
+ if (_meter) {
+ _meter->set_display_to_user (_meter_point == MeterCustom);
+ }
+ }
+
set_processor_state (processor_state);
if ((prop = node.property ("self-solo")) != 0) {
set_active (yn, this);
}
- if ((prop = node.property (X_("meter-point"))) != 0) {
- MeterPoint mp = MeterPoint (string_2_enum (prop->value (), _meter_point));
- set_meter_point (mp, true);
- if (_meter) {
- _meter->set_display_to_user (_meter_point == MeterCustom);
- }
- }
-
if ((prop = node.property (X_("order-keys"))) != 0) {
int32_t n;
}
}
+ if ((prop = node.property (X_("processor-after-last-custom-meter"))) != 0) {
+ PBD::ID id (prop->value ());
+ Glib::RWLock::ReaderLock lm (_processor_lock);
+ ProcessorList::const_iterator i = _processors.begin ();
+ while (i != _processors.end() && (*i)->id() != id) {
+ ++i;
+ }
+
+ if (i != _processors.end ()) {
+ _processor_after_last_custom_meter = *i;
+ _custom_meter_position_noted = true;
+ }
+ }
+
+ if ((prop = node.property (X_("last-custom-meter-was-at-end"))) != 0) {
+ _last_custom_meter_was_at_end = string_is_affirmative (prop->value ());
+ }
+
for (niter = nlist.begin(); niter != nlist.end(); ++niter){
child = *niter;
}
int
-Route::_set_state_2X (const XMLNode& node, int version)
+Route::set_state_2X (const XMLNode& node, int version)
{
XMLNodeList nlist;
XMLNodeConstIterator niter;
Route::set_name (prop->value ());
}
- if ((prop = child->property (X_("id"))) != 0) {
- _id = prop->value ();
- }
+ set_id (*child);
if ((prop = child->property (X_("active"))) != 0) {
bool yn = string_is_affirmative (prop->value());
new_order.push_back (_amp);
} else if (prop->value() == "meter") {
_meter->set_state (**niter, Stateful::current_state_version);
+ new_order.push_back (_meter);
} else if (prop->value() == "main-outs") {
_main_outs->set_state (**niter, Stateful::current_state_version);
} else if (prop->value() == "intreturn") {
} else if (prop->value() == "ladspa" || prop->value() == "Ladspa" ||
prop->value() == "lv2" ||
prop->value() == "vst" ||
- prop->value() == "lxvst" ||
+ prop->value() == "lxvst" ||
prop->value() == "audiounit") {
processor.reset (new PluginInsert(_session));
void
Route::add_send_to_internal_return (InternalSend* send)
{
+ Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
Glib::RWLock::ReaderLock rm (_processor_lock);
for (ProcessorList::const_iterator x = _processors.begin(); x != _processors.end(); ++x) {
void
Route::remove_send_from_internal_return (InternalSend* send)
{
+ Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
Glib::RWLock::ReaderLock rm (_processor_lock);
for (ProcessorList::const_iterator x = _processors.begin(); x != _processors.end(); ++x) {
}
}
-/** Add a monitor send (if we don't already have one) but don't activate it */
-int
-Route::listen_via_monitor ()
+void
+Route::enable_monitor_send ()
{
- /* master never sends to control outs */
+ /* Caller must hold process lock */
+ assert (!AudioEngine::instance()->process_lock().trylock());
+
+ /* master never sends to monitor section via the normal mechanism */
assert (!is_master ());
/* make sure we have one */
}
/* set it up */
- Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
configure_processors (0);
-
- return 0;
}
-/** Add an internal send to a route.
+/** Add an aux send to a route.
* @param route route to send to.
* @param placement placement for the send.
*/
int
-Route::listen_via (boost::shared_ptr<Route> route, Placement placement)
+Route::add_aux_send (boost::shared_ptr<Route> route, Placement placement)
{
assert (route != _session.monitor_out ());
}
try {
- boost::shared_ptr<InternalSend> listener (new InternalSend (_session, _pannable, _mute_master, route, Delivery::Aux));
+
+ boost::shared_ptr<InternalSend> listener;
+
+ {
+ Glib::Mutex::Lock lm (AudioEngine::instance()->process_lock ());
+ listener.reset (new InternalSend (_session, _pannable, _mute_master, route, Delivery::Aux));
+ }
+
add_processor (listener, placement);
} catch (failed_constructor& err) {
}
void
-Route::drop_listen (boost::shared_ptr<Route> route)
+Route::remove_aux_or_listen (boost::shared_ptr<Route> route)
{
ProcessorStreams err;
ProcessorList::iterator tmp;
- Glib::RWLock::ReaderLock rl(_processor_lock);
- rl.acquire ();
-
- again:
- for (ProcessorList::iterator x = _processors.begin(); x != _processors.end(); ) {
-
- boost::shared_ptr<InternalSend> d = boost::dynamic_pointer_cast<InternalSend>(*x);
-
- if (d && d->target_route() == route) {
- rl.release ();
- remove_processor (*x, &err);
- rl.acquire ();
+ {
+ Glib::RWLock::ReaderLock rl(_processor_lock);
- /* list could have been demolished while we dropped the lock
- so start over.
- */
+ /* have to do this early because otherwise processor reconfig
+ * will put _monitor_send back in the list
+ */
- goto again;
+ if (route == _session.monitor_out()) {
+ _monitor_send.reset ();
}
- }
- rl.release ();
+ again:
+ for (ProcessorList::iterator x = _processors.begin(); x != _processors.end(); ++x) {
+
+ boost::shared_ptr<InternalSend> d = boost::dynamic_pointer_cast<InternalSend>(*x);
+
+ if (d && d->target_route() == route) {
+ rl.release ();
+ remove_processor (*x, &err, false);
+ rl.acquire ();
- if (route == _session.monitor_out()) {
- _monitor_send.reset ();
+ /* list could have been demolished while we dropped the lock
+ so start over.
+ */
+
+ goto again;
+ }
+ }
}
}
}
bool
-Route::direct_feeds (boost::shared_ptr<Route> other, bool* only_send)
+Route::direct_feeds_according_to_reality (boost::shared_ptr<Route> other, bool* via_send_only)
{
DEBUG_TRACE (DEBUG::Graph, string_compose ("Feeds? %1\n", _name));
if (_output->connected_to (other->input())) {
DEBUG_TRACE (DEBUG::Graph, string_compose ("\tdirect FEEDS %2\n", other->name()));
- if (only_send) {
- *only_send = false;
+ if (via_send_only) {
+ *via_send_only = false;
}
return true;
if ((iop = boost::dynamic_pointer_cast<IOProcessor>(*r)) != 0) {
if (iop->feeds (other)) {
DEBUG_TRACE (DEBUG::Graph, string_compose ("\tIOP %1 does feed %2\n", iop->name(), other->name()));
- if (only_send) {
- *only_send = true;
+ if (via_send_only) {
+ *via_send_only = true;
}
return true;
} else {
return false;
}
+bool
+Route::direct_feeds_according_to_graph (boost::shared_ptr<Route> other, bool* via_send_only)
+{
+ return _session._current_route_graph.has (shared_from_this (), other, via_send_only);
+}
+
/** Called from the (non-realtime) butler thread when the transport is stopped */
void
Route::nonrealtime_handle_transport_stopped (bool /*abort_ignored*/, bool did_locate, bool can_flush_processors)
}
int
-Route::no_roll (pframes_t nframes, framepos_t start_frame, framepos_t end_frame,
- bool session_state_changing, bool /*can_record*/)
+Route::no_roll (pframes_t nframes, framepos_t start_frame, framepos_t end_frame, bool session_state_changing)
{
Glib::RWLock::ReaderLock lm (_processor_lock, Glib::TRY_LOCK);
if (!lm.locked()) {
}
int
-Route::roll (pframes_t nframes, framepos_t start_frame, framepos_t end_frame, int declick,
- bool /*can_record*/, bool& /* need_butler */)
+Route::roll (pframes_t nframes, framepos_t start_frame, framepos_t end_frame, int declick, bool& /* need_butler */)
{
Glib::RWLock::ReaderLock lm (_processor_lock, Glib::TRY_LOCK);
if (!lm.locked()) {
}
int
-Route::silent_roll (pframes_t nframes, framepos_t /*start_frame*/, framepos_t /*end_frame*/,
- bool /*can_record*/, bool& /* need_butler */)
+Route::silent_roll (pframes_t nframes, framepos_t /*start_frame*/, framepos_t /*end_frame*/, bool& /* need_butler */)
{
silence (nframes);
return 0;
}
-void
-Route::toggle_monitor_input ()
-{
- for (PortSet::iterator i = _input->ports().begin(); i != _input->ports().end(); ++i) {
- i->ensure_monitor_input( ! i->monitoring_input());
- }
-}
-
bool
Route::has_external_redirects () const
{
return;
}
- _meter_point = p;
-
bool meter_was_visible_to_user = _meter->display_to_user ();
{
Glib::RWLock::WriterLock lm (_processor_lock);
+ maybe_note_meter_position ();
+
+ _meter_point = p;
+
if (_meter_point != MeterCustom) {
_meter->set_display_to_user (false);
setup_invisible_processors ();
- ProcessorList::iterator loc = find (_processors.begin(), _processors.end(), _meter);
+ } else {
- ChanCount m_in;
+ _meter->set_display_to_user (true);
- if (loc == _processors.begin()) {
- m_in = _input->n_ports();
- } else {
- ProcessorList::iterator before = loc;
- --before;
- m_in = (*before)->output_streams ();
+ /* If we have a previous position for the custom meter, try to put it there */
+ if (_custom_meter_position_noted) {
+ boost::shared_ptr<Processor> after = _processor_after_last_custom_meter.lock ();
+
+ if (after) {
+ ProcessorList::iterator i = find (_processors.begin(), _processors.end(), after);
+ if (i != _processors.end ()) {
+ _processors.remove (_meter);
+ _processors.insert (i, _meter);
+ }
+ } else if (_last_custom_meter_was_at_end) {
+ _processors.remove (_meter);
+ _processors.push_back (_meter);
+ }
}
+ }
- _meter->reflect_inputs (m_in);
-
- /* we do not need to reconfigure the processors, because the meter
- (a) is always ready to handle processor_max_streams
- (b) is always an N-in/N-out processor, and thus moving
- it doesn't require any changes to the other processors.
- */
+ /* Set up the meter for its new position */
+ ProcessorList::iterator loc = find (_processors.begin(), _processors.end(), _meter);
+
+ ChanCount m_in;
+
+ if (loc == _processors.begin()) {
+ m_in = _input->n_ports();
} else {
-
- // just make it visible and let the user move it
-
- _meter->set_display_to_user (true);
+ ProcessorList::iterator before = loc;
+ --before;
+ m_in = (*before)->output_streams ();
}
+
+ _meter->reflect_inputs (m_in);
+
+ /* we do not need to reconfigure the processors, because the meter
+ (a) is always ready to handle processor_max_streams
+ (b) is always an N-in/N-out processor, and thus moving
+ it doesn't require any changes to the other processors.
+ */
}
meter_change (); /* EMIT SIGNAL */
return ret;
}
+/** Set the name of a route in an XML description.
+ * @param node XML <Route> node to set the name in.
+ * @param name New name.
+ */
+void
+Route::set_name_in_state (XMLNode& node, string const & name)
+{
+ node.add_property (X_("name"), name);
+
+ XMLNodeList children = node.children();
+ for (XMLNodeIterator i = children.begin(); i != children.end(); ++i) {
+
+ if ((*i)->name() == X_("IO")) {
+
+ IO::set_name_in_state (**i, name);
+
+ } else if ((*i)->name() == X_("Processor")) {
+
+ XMLProperty* role = (*i)->property (X_("role"));
+ if (role && role->value() == X_("Main")) {
+ (*i)->add_property (X_("name"), name);
+ }
+
+ } else if ((*i)->name() == X_("Diskstream")) {
+
+ (*i)->add_property (X_("playlist"), string_compose ("%1.1", name).c_str());
+ (*i)->add_property (X_("name"), name);
+
+ }
+ }
+}
+
boost::shared_ptr<Send>
Route::internal_send_for (boost::shared_ptr<const Route> target) const
{
}
}
-bool
-Route::should_monitor () const
-{
- switch (Config->get_monitoring_model()) {
- case HardwareMonitoring:
- case ExternalMonitoring:
- return !record_enabled() || (_session.config.get_auto_input() && !_session.actively_recording());
- break;
- default:
- break;
- }
-
- return true;
-}
-
void
Route::unpan ()
{
}
}
}
+
+/** If the meter point is `Custom', make a note of where the meter is.
+ * This is so that if the meter point is subsequently set to something else,
+ * and then back to custom, we can put the meter back where it was last time
+ * custom was enabled.
+ *
+ * Must be called with the _processor_lock held.
+ */
+void
+Route::maybe_note_meter_position ()
+{
+ if (_meter_point != MeterCustom) {
+ return;
+ }
+
+ _custom_meter_position_noted = true;
+ for (ProcessorList::iterator i = _processors.begin(); i != _processors.end(); ++i) {
+ if (boost::dynamic_pointer_cast<PeakMeter> (*i)) {
+ ProcessorList::iterator j = i;
+ ++j;
+ if (j != _processors.end ()) {
+ _processor_after_last_custom_meter = *j;
+ _last_custom_meter_was_at_end = false;
+ } else {
+ _last_custom_meter_was_at_end = true;
+ }
+ }
+ }
+}
+
+boost::shared_ptr<Processor>
+Route::processor_by_id (PBD::ID id) const
+{
+ Glib::RWLock::ReaderLock lm (_processor_lock);
+ for (ProcessorList::const_iterator i = _processors.begin(); i != _processors.end(); ++i) {
+ if ((*i)->id() == id) {
+ return *i;
+ }
+ }
+
+ return boost::shared_ptr<Processor> ();
+}
+
+/** @return the monitoring state, or in other words what data we are pushing
+ * into the route (data from the inputs, data from disk or silence)
+ */
+MonitorState
+Route::monitoring_state () const
+{
+ return MonitoringInput;
+}
+
+/** @return what we should be metering; either the data coming from the input
+ * IO or the data that is flowing through the route.
+ */
+MeterState
+Route::metering_state () const
+{
+ return MeteringRoute;
+}
projects / ardour.git / blobdiff