#include "ardour/session.h"
#include "ardour/slave.h"
-#include "i18n.h"
+#include "pbd/i18n.h"
using namespace std;
using namespace ARDOUR;
-using namespace MIDI;
using namespace PBD;
using namespace Timecode;
* This filter is adaptive so that fast vari-speed signals
* will not be affected by it.
*/
-#define LTC_RISE_TIME(speed) MIN (100, MAX(25, (4000000 / ((speed==0)?1:speed) / engine().frame_rate())))
+#define LTC_RISE_TIME(speed) MIN (100, MAX(40, (4000000 / ((speed==0)?1:speed) / engine().sample_rate())))
+
+#define TV_STANDARD(tcf) \
+ (timecode_to_frames_per_second(tcf)==25.0 ? LTC_TV_625_50 : \
+ timecode_has_drop_frames(tcf)? LTC_TV_525_60 : LTC_TV_FILM_24)
void
Session::ltc_tx_initialize()
{
ltc_enc_tcformat = config.get_timecode_format();
+ ltc_tx_parse_offset();
DEBUG_TRACE (DEBUG::LTC, string_compose("LTC TX init sr: %1 fps: %2\n", nominal_frame_rate(), timecode_to_frames_per_second(ltc_enc_tcformat)));
ltc_encoder = ltc_encoder_create(nominal_frame_rate(),
timecode_to_frames_per_second(ltc_enc_tcformat),
- -2);
+ TV_STANDARD(ltc_enc_tcformat), 0);
ltc_encoder_set_bufsize(ltc_encoder, nominal_frame_rate(), 23.0);
ltc_encoder_set_filter(ltc_encoder, LTC_RISE_TIME(1.0));
* since the fps can change and A3's min fps: 24000/1001 */
ltc_enc_buf = (ltcsnd_sample_t*) calloc((nominal_frame_rate() / 23), sizeof(ltcsnd_sample_t));
ltc_speed = 0;
+ ltc_prev_cycle = -1;
ltc_tx_reset();
ltc_tx_resync_latency();
Xrun.connect_same_thread (*this, boost::bind (&Session::ltc_tx_reset, this));
Session::ltc_tx_cleanup()
{
DEBUG_TRACE (DEBUG::LTC, "LTC TX cleanup\n");
- if (ltc_enc_buf) free(ltc_enc_buf);
+ free(ltc_enc_buf);
+ ltc_enc_buf = NULL;
ltc_encoder_free(ltc_encoder);
ltc_encoder = NULL;
}
ltc_encoder_reset(ltc_encoder);
}
+void
+Session::ltc_tx_parse_offset() {
+ Timecode::Time offset_tc;
+ Timecode::parse_timecode_format(config.get_timecode_generator_offset(), offset_tc);
+ offset_tc.rate = timecode_frames_per_second();
+ offset_tc.drop = timecode_drop_frames();
+ timecode_to_sample(offset_tc, ltc_timecode_offset, false, false);
+ ltc_timecode_negative_offset = !offset_tc.negative;
+ ltc_prev_cycle = -1;
+}
+
void
Session::ltc_tx_recalculate_position()
{
Timecode::timecode_to_sample (a3tc, ltc_enc_pos, true, false,
(double)frame_rate(),
config.get_subframes_per_frame(),
- config.get_timecode_offset_negative(), config.get_timecode_offset()
+ ltc_timecode_negative_offset, ltc_timecode_offset
);
restarting = false;
}
TimecodeFormat cur_timecode = config.get_timecode_format();
if (cur_timecode != ltc_enc_tcformat) {
DEBUG_TRACE (DEBUG::LTC, string_compose("LTC TX1: TC format mismatch - reinit sr: %1 fps: %2\n", nominal_frame_rate(), timecode_to_frames_per_second(cur_timecode)));
- if (ltc_encoder_reinit(ltc_encoder, nominal_frame_rate(), timecode_to_frames_per_second(cur_timecode), -2)) {
+ if (ltc_encoder_reinit(ltc_encoder, nominal_frame_rate(),
+ timecode_to_frames_per_second(cur_timecode),
+ TV_STANDARD(cur_timecode), 0
+ )) {
PBD::error << _("LTC encoder: invalid framerate - LTC encoding is disabled for the remainder of this session.") << endmsg;
ltc_tx_cleanup();
return;
}
ltc_encoder_set_filter(ltc_encoder, LTC_RISE_TIME(ltc_speed));
ltc_enc_tcformat = cur_timecode;
+ ltc_tx_parse_offset();
ltc_tx_reset();
}
/* port latency compensation:
* The _generated timecode_ is offset by the port-latency,
* therefore the offset depends on the direction of transport.
+ *
+ * latency is compensated by adding it to the timecode to
+ * be generated. e.g. if the signal will reach the output in
+ * N samples time from now, generate the timecode for (now + N).
+ *
+ * sample-sync is achieved by further calculating the difference
+ * between the timecode and the session-transport and offsetting the
+ * buffer.
+ *
+ * The timecode is generated directly in the Session process callback
+ * using _transport_frame. It requires that the session has set the
+ * port's playback latency to worst_playback_latency() prior to
+ * calling ltc_tx_send_time_code_for_cycle().
*/
- framepos_t cycle_start_frame = (current_speed < 0) ? (start_frame - ltc_out_latency.max) : (start_frame + ltc_out_latency.max);
+ framepos_t cycle_start_frame;
+
+ if (current_speed < 0) {
+ cycle_start_frame = (start_frame - ltc_out_latency.max + worst_playback_latency());
+ } else if (current_speed > 0) {
+ cycle_start_frame = (start_frame + ltc_out_latency.max - worst_playback_latency());
+ } else {
+ /* There is no need to compensate for latency when not rolling
+ * rather send the accurate NOW timecode
+ * (LTC encoder compenates latency by sending earlier timecode)
+ */
+ cycle_start_frame = start_frame;
+ }
+
+ /* LTC TV standard offset */
+ if (current_speed != 0) {
+ /* ditto - send "NOW" if not rolling */
+ cycle_start_frame -= ltc_frame_alignment(frames_per_timecode_frame(), TV_STANDARD(cur_timecode));
+ }
/* cycle-start may become negative due to latency compensation */
if (cycle_start_frame < 0) { cycle_start_frame = 0; }
ltc_tx_reset();
}
- if (ltc_speed != new_ltc_speed) {
+ if (ltc_speed != new_ltc_speed
+ /* but only once if, current_speed changes to 0. In that case
+ * new_ltc_speed is > 0 because (end_frame - start_frame) == jack-period for no-roll
+ * but ltc_speed will still be 0
+ */
+ && (current_speed != 0 || ltc_speed != current_speed)
+ ) {
/* check ./libs/ardour/interpolation.cc CubicInterpolation::interpolate
* if target_speed != current_speed we should interpolate, too.
*
* end_frame is calculated from 'frames_moved' which includes the interpolation.
* so we're good.
*/
- DEBUG_TRACE (DEBUG::LTC, string_compose("LTC TX2: speed change old: %1 cur: %2 tgt: %3 ctd: %4\n", ltc_speed, current_speed, target_speed, fabs(current_speed) - target_speed));
+ DEBUG_TRACE (DEBUG::LTC, string_compose("LTC TX2: speed change old: %1 cur: %2 tgt: %3 ctd: %4\n", ltc_speed, current_speed, target_speed, fabs(current_speed) - target_speed, new_ltc_speed));
speed_changed = true;
ltc_encoder_set_filter(ltc_encoder, LTC_RISE_TIME(new_ltc_speed));
}
ltc_speed = new_ltc_speed;
return;
}
+ if (start_frame != ltc_prev_cycle) {
+ DEBUG_TRACE (DEBUG::LTC, string_compose("LTC TX2: no-roll seek from %1 to %2 (%3)\n", ltc_prev_cycle, start_frame, cycle_start_frame));
+ ltc_tx_reset();
+ }
}
if (fabs(new_ltc_speed) > 10.0) {
}
}
+ ltc_prev_cycle = start_frame;
ltc_speed = new_ltc_speed;
DEBUG_TRACE (DEBUG::LTC, string_compose("LTC TX2: transport speed %1.\n", ltc_speed));
timecode_drop_frames(),
(double)frame_rate(),
config.get_subframes_per_frame(),
- config.get_timecode_offset_negative(), config.get_timecode_offset()
+ ltc_timecode_negative_offset, ltc_timecode_offset
);
/* convert timecode back to sample-position */
Timecode::timecode_to_sample (tc_start, tc_sample_start, true, false,
(double)frame_rate(),
config.get_subframes_per_frame(),
- config.get_timecode_offset_negative(), config.get_timecode_offset()
+ ltc_timecode_negative_offset, ltc_timecode_offset
);
/* difference between current frame and TC frame in samples */
frameoffset_t soff = cycle_start_frame - tc_sample_start;
+ if (current_speed == 0) {
+ soff = 0;
+ }
DEBUG_TRACE (DEBUG::LTC, string_compose("LTC TX3: A3cycle: %1 = A3tc: %2 +off: %3\n",
cycle_start_frame, tc_sample_start, soff));
DEBUG_TRACE (DEBUG::LTC, string_compose("LTC TX4: now: %1 trs: %2 toff %3\n", cycle_start_frame, tc_sample_start, soff));
- uint32_t cyc_off;
+ int32_t cyc_off;
if (soff < 0 || soff >= fptcf) {
/* session framerate change between (2) and now */
ltc_tx_reset();
restarting = true;
}
- if (cyc_off > 0 && cyc_off <= nframes) {
+ if (cyc_off >= 0 && cyc_off <= (int32_t) nframes) {
/* offset in this cycle */
txf= rint(cyc_off / fabs(ltc_speed));
memset(out, 0, cyc_off * sizeof(Sample));
* To do better than this, resampling (or a rewrite of the
* encoder) is required.
*/
- ltc_speed -= ((ltc_enc_pos + ltc_enc_cnt - poff) - cycle_start_frame) / engine().frame_rate();
+ ltc_speed -= ((ltc_enc_pos + ltc_enc_cnt - poff) - cycle_start_frame) / engine().sample_rate();
}
projects / ardour.git / blobdiff