*/
#include <sstream>
+#include <vector>
+#include <climits>
+
#include <stdint.h>
-#include "strip.h"
#include <sys/time.h>
#include "ardour/debug.h"
#include "ardour/midi_ui.h"
#include "ardour/meter.h"
+#include "ardour/monitor_control.h"
+#include "ardour/plugin_insert.h"
#include "ardour/pannable.h"
#include "ardour/panner.h"
#include "ardour/panner_shell.h"
+#include "ardour/phase_control.h"
#include "ardour/rc_configuration.h"
+#include "ardour/record_enable_control.h"
#include "ardour/route.h"
#include "ardour/session.h"
#include "ardour/send.h"
+#include "ardour/solo_isolate_control.h"
#include "ardour/track.h"
+#include "ardour/midi_track.h"
#include "ardour/user_bundle.h"
+#include "ardour/profile.h"
#include "mackie_control_protocol.h"
#include "surface_port.h"
#include "surface.h"
+#include "strip.h"
#include "button.h"
#include "led.h"
#include "pot.h"
, _controls_locked (false)
, _transport_is_rolling (false)
, _metering_active (true)
- , _block_vpot_mode_redisplay_until (0)
, _block_screen_redisplay_until (0)
+ , return_to_vpot_mode_display_at (UINT64_MAX)
+ , eq_band (-1)
, _pan_mode (PanAzimuthAutomation)
, _last_gain_position_written (-1.0)
, _last_pan_azi_position_written (-1.0)
, _last_pan_width_position_written (-1.0)
, _last_trim_position_written (-1.0)
- , redisplay_requests (256)
{
_fader = dynamic_cast<Fader*> (Fader::factory (*_surface, index, "fader", *this));
_vpot = dynamic_cast<Pot*> (Pot::factory (*_surface, Pot::ID + index, "vpot", *this));
}
void
-Strip::set_route (boost::shared_ptr<Route> r, bool /*with_messages*/)
+Strip::set_stripable (boost::shared_ptr<Stripable> r, bool /*with_messages*/)
{
if (_controls_locked) {
return;
}
- route_connections.drop_connections ();
+ mb_pan_controllable.reset();
+
+ stripable_connections.drop_connections ();
_solo->set_control (boost::shared_ptr<AutomationControl>());
_mute->set_control (boost::shared_ptr<AutomationControl>());
_fader->set_control (boost::shared_ptr<AutomationControl>());
_vpot->set_control (boost::shared_ptr<AutomationControl>());
- _route = r;
-
- control_by_parameter.clear ();
-
- control_by_parameter[PanAzimuthAutomation] = (Control*) 0;
- control_by_parameter[PanWidthAutomation] = (Control*) 0;
- control_by_parameter[PanElevationAutomation] = (Control*) 0;
- control_by_parameter[PanFrontBackAutomation] = (Control*) 0;
- control_by_parameter[PanLFEAutomation] = (Control*) 0;
- control_by_parameter[GainAutomation] = (Control*) 0;
- control_by_parameter[TrimAutomation] = (Control*) 0;
+ _stripable = r;
reset_saved_values ();
if (!r) {
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Surface %1 Strip %2 mapped to null route\n", _surface->number(), _index));
zero ();
return;
}
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Surface %1 strip %2 now mapping route %3\n",
- _surface->number(), _index, _route->name()));
-
- _solo->set_control (_route->solo_control());
- _mute->set_control (_route->mute_control());
-
- _pan_mode = PanAzimuthAutomation;
- potmode_changed (true);
-
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Surface %1 strip %2 now mapping stripable %3\n",
+ _surface->number(), _index, _stripable->name()));
- _route->solo_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
- _route->listen_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
+ _solo->set_control (_stripable->solo_control());
+ _mute->set_control (_stripable->mute_control());
- _route->mute_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_mute_changed, this), ui_context());
+ _stripable->solo_control()->Changed.connect (stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
+ _stripable->mute_control()->Changed.connect(stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_mute_changed, this), ui_context());
- if (_route->trim()) {
- _route->trim_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trim_changed, this, false), ui_context());
+ boost::shared_ptr<AutomationControl> pan_control = _stripable->pan_azimuth_control();
+ if (pan_control) {
+ pan_control->Changed.connect(stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_azi_changed, this, false), ui_context());
}
- boost::shared_ptr<Pannable> pannable = _route->pannable();
-
- if (pannable && _route->panner()) {
- pannable->pan_azimuth_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_azi_changed, this, false), ui_context());
- pannable->pan_width_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_width_changed, this, false), ui_context());
+ pan_control = _stripable->pan_width_control();
+ if (pan_control) {
+ pan_control->Changed.connect(stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_width_changed, this, false), ui_context());
}
- _route->gain_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_gain_changed, this, false), ui_context());
- _route->PropertyChanged.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_property_changed, this, _1), ui_context());
-
- boost::shared_ptr<Track> trk = boost::dynamic_pointer_cast<ARDOUR::Track>(_route);
- if (trk) {
- _recenable->set_control (trk->rec_enable_control());
- trk->rec_enable_control()->Changed .connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_record_enable_changed, this), ui_context());
+ _stripable->gain_control()->Changed.connect(stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_gain_changed, this, false), ui_context());
+ _stripable->PropertyChanged.connect (stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_property_changed, this, _1), ui_context());
+ _stripable->presentation_info().PropertyChanged.connect (stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_property_changed, this, _1), ui_context());
+ boost::shared_ptr<AutomationControl> rec_enable_control = _stripable->rec_enable_control ();
+ if (rec_enable_control) {
+ _recenable->set_control (rec_enable_control);
+ rec_enable_control->Changed.connect (stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_record_enable_changed, this), ui_context());
}
- // TODO this works when a currently-banked route is made inactive, but not
- // when a route is activated which should be currently banked.
+ // TODO this works when a currently-banked stripable is made inactive, but not
+ // when a stripable is activated which should be currently banked.
- _route->active_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_active_changed, this), ui_context());
- _route->DropReferences.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_route_deleted, this), ui_context());
+ _stripable->DropReferences.connect (stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_stripable_deleted, this), ui_context());
- /* Update */
-
- notify_all ();
-
- /* setup legal VPot modes for this route */
+ /* setup legal VPot modes for this stripable */
possible_pot_parameters.clear();
- if (pannable) {
- boost::shared_ptr<Panner> panner = _route->panner();
- if (panner) {
- set<Evoral::Parameter> automatable = panner->what_can_be_automated ();
- set<Evoral::Parameter>::iterator a;
+ if (_stripable->pan_azimuth_control()) {
+ possible_pot_parameters.push_back (PanAzimuthAutomation);
+ }
+ if (_stripable->pan_width_control()) {
+ possible_pot_parameters.push_back (PanWidthAutomation);
+ }
+ if (_stripable->pan_elevation_control()) {
+ possible_pot_parameters.push_back (PanElevationAutomation);
+ }
+ if (_stripable->pan_frontback_control()) {
+ possible_pot_parameters.push_back (PanFrontBackAutomation);
+ }
+ if (_stripable->pan_lfe_control()) {
+ possible_pot_parameters.push_back (PanLFEAutomation);
+ }
- if ((a = automatable.find (PanAzimuthAutomation)) != automatable.end()) {
- possible_pot_parameters.push_back (PanAzimuthAutomation);
- }
+ _pan_mode = PanAzimuthAutomation;
- if ((a = automatable.find (PanWidthAutomation)) != automatable.end()) {
- possible_pot_parameters.push_back (PanWidthAutomation);
- }
- }
+ if (_surface->mcp().subview_mode() == MackieControlProtocol::None) {
+ set_vpot_parameter (_pan_mode);
}
+
+ _fader->set_control (_stripable->gain_control());
+
+ notify_all ();
}
void
Strip::notify_all()
{
- if (!_route) {
+ if (!_stripable) {
zero ();
return;
}
+ // The active V-pot control may not be active for this strip
+ // But if we zero it in the controls function it may erase
+ // the one we do want
+ _surface->write (_vpot->zero());
notify_solo_changed ();
notify_mute_changed ();
notify_gain_changed ();
notify_property_changed (PBD::PropertyChange (ARDOUR::Properties::name));
+ notify_property_changed (PBD::PropertyChange (ARDOUR::Properties::selected));
notify_panner_azi_changed ();
notify_panner_width_changed ();
notify_record_enable_changed ();
- notify_trim_changed ();
+ notify_processor_changed ();
}
void
Strip::notify_solo_changed ()
{
- if (_route && _solo) {
- _surface->write (_solo->set_state ((_route->soloed() || _route->listening_via_monitor()) ? on : off));
+ if (_stripable && _solo) {
+ _surface->write (_solo->set_state (_stripable->solo_control()->soloed() ? on : off));
}
}
Strip::notify_mute_changed ()
{
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Strip %1 mute changed\n", _index));
- if (_route && _mute) {
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("\troute muted ? %1\n", _route->muted()));
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("mute message: %1\n", _mute->set_state (_route->muted() ? on : off)));
+ if (_stripable && _mute) {
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("\tstripable muted ? %1\n", _stripable->mute_control()->muted()));
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("mute message: %1\n", _mute->set_state (_stripable->mute_control()->muted() ? on : off)));
- _surface->write (_mute->set_state (_route->muted() ? on : off));
+ _surface->write (_mute->set_state (_stripable->mute_control()->muted() ? on : off));
}
}
void
Strip::notify_record_enable_changed ()
{
- if (_route && _recenable) {
- _surface->write (_recenable->set_state (_route->record_enabled() ? on : off));
+ if (_stripable && _recenable) {
+ boost::shared_ptr<Track> trk = boost::dynamic_pointer_cast<Track> (_stripable);
+ if (trk) {
+ _surface->write (_recenable->set_state (trk->rec_enable_control()->get_value() ? on : off));
+ }
}
}
void
-Strip::notify_active_changed ()
-{
- _surface->mcp().refresh_current_bank();
-}
-
-void
-Strip::notify_route_deleted ()
+Strip::notify_stripable_deleted ()
{
+ _surface->mcp().notify_stripable_removed ();
_surface->mcp().refresh_current_bank();
}
void
Strip::notify_gain_changed (bool force_update)
{
- if (_route) {
+ if (!_stripable) {
+ return;
+ }
- Control* control;
+ boost::shared_ptr<AutomationControl> ac = _stripable->gain_control();
+ Control* control;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- control = _vpot;
- } else {
- control = _fader;
- }
+ if (!ac) {
+ /* doesn't seem possible but lets be safe */
+ return;
+ }
- boost::shared_ptr<AutomationControl> ac = _route->gain_control();
+ /* track gain control could be on vpot or fader, depending in
+ * flip mode.
+ */
- float gain_coefficient = ac->get_value();
- float normalized_position = ac->internal_to_interface (gain_coefficient);
+ if (_vpot->control() == ac) {
+ control = _vpot;
+ } else if (_fader->control() == ac) {
+ control = _fader;
+ } else {
+ return;
+ }
+ float gain_coefficient = ac->get_value();
+ float normalized_position = ac->internal_to_interface (gain_coefficient);
- if (force_update || normalized_position != _last_gain_position_written) {
+ if (force_update || normalized_position != _last_gain_position_written) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- if (!control->in_use()) {
- _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
- }
- queue_parameter_display (GainAutomation, gain_coefficient);
+ if (!control->in_use()) {
+ if (control == _vpot) {
+ _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
} else {
- if (!control->in_use()) {
- _surface->write (_fader->set_position (normalized_position));
- }
- queue_parameter_display (GainAutomation, gain_coefficient);
+ _surface->write (_fader->set_position (normalized_position));
}
-
- _last_gain_position_written = normalized_position;
}
+
+ do_parameter_display (GainAutomation, gain_coefficient);
+ _last_gain_position_written = normalized_position;
}
}
void
-Strip::notify_trim_changed (bool force_update)
+Strip::notify_processor_changed (bool force_update)
+{
+}
+
+void
+Strip::notify_property_changed (const PropertyChange& what_changed)
{
- if (_route) {
+ if (what_changed.contains (ARDOUR::Properties::name)) {
+ show_stripable_name ();
+ }
- if (!_route->trim()) {
- _surface->write (_vpot->zero());
- return;
+ if (what_changed.contains (ARDOUR::Properties::selected)) {
+ if (_stripable) {
+ _surface->write (_select->set_state (_stripable->is_selected()));
}
- Control* control = control_by_parameter[TrimAutomation];
+ }
+}
- boost::shared_ptr<AutomationControl> ac = _route->trim_control();
+void
+Strip::show_stripable_name ()
+{
+ MackieControlProtocol::SubViewMode svm = _surface->mcp().subview_mode();
- float gain_coefficient = ac->get_value();
- float normalized_position = ac->internal_to_interface (gain_coefficient);
+ if (svm != MackieControlProtocol::None) {
+ /* subview mode is responsible for upper line */
+ return;
+ }
- if (force_update || normalized_position != _last_trim_position_written) {
- if (control == _fader) {
- if (!_fader->in_use()) {
- _surface->write (_fader->set_position (normalized_position));
- queue_parameter_display (TrimAutomation, gain_coefficient);
- }
- } else if (control == _vpot) {
- _surface->write (_vpot->set (normalized_position, true, Pot::dot));
- queue_parameter_display (TrimAutomation, gain_coefficient);
- }
- _last_trim_position_written = normalized_position;
- }
+ string fullname = string();
+ if (!_stripable) {
+ fullname = string();
+ } else {
+ fullname = _stripable->name();
+ }
+
+ if (fullname.length() <= 6) {
+ pending_display[0] = fullname;
+ } else {
+ pending_display[0] = PBD::short_version (fullname, 6);
}
}
void
-Strip::notify_property_changed (const PropertyChange& what_changed)
+Strip::notify_send_level_change (AutomationType type, uint32_t send_num, bool force_update)
{
- if (!what_changed.contains (ARDOUR::Properties::name)) {
+ boost::shared_ptr<Stripable> r = _surface->mcp().subview_stripable();
+
+ if (!r) {
+ /* not in subview mode */
+ return;
+ }
+
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::Sends) {
+ /* no longer in Sends subview mode */
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> control = r->send_level_controllable (send_num);
+ if (!control) {
return;
}
- show_route_name ();
+ if (control) {
+ float val = control->get_value();
+ do_parameter_display (type, val);
+
+ if (_vpot->control() == control) {
+ /* update pot/encoder */
+ _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
+ }
+ }
}
void
-Strip::show_route_name ()
+Strip::notify_trackview_change (AutomationType type, uint32_t send_num, bool force_update)
{
- if (!_route) {
+ boost::shared_ptr<Stripable> r = _surface->mcp().subview_stripable();
+
+ if (!r) {
+ /* not in subview mode */
return;
}
- string line1;
- string fullname = _route->name();
- if (fullname.length() <= 6) {
- line1 = fullname;
- } else {
- line1 = PBD::short_version (fullname, 6);
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::TrackView) {
+ /* no longer in TrackViewsubview mode */
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> control;
+ boost::shared_ptr<Track> track = boost::dynamic_pointer_cast<Track> (r);
+
+ switch (type) {
+ case TrimAutomation:
+ control = r->trim_control();
+ break;
+ case SoloIsolateAutomation:
+ control = r->solo_isolate_control ();
+ break;
+ case SoloSafeAutomation:
+ control = r->solo_safe_control ();
+ break;
+ case MonitoringAutomation:
+ if (track) {
+ control = track->monitoring_control();
+ }
+ break;
+ case PhaseAutomation:
+ control = r->phase_control ();
+ break;
+ default:
+ break;
}
- _surface->write (display (0, line1));
+ if (control) {
+ float val = control->get_value();
+
+ /* Note: all of the displayed controllables require the display
+ * of their *actual* ("internal") value, not the version mapped
+ * into the normalized 0..1.0 ("interface") range.
+ */
+
+ do_parameter_display (type, val);
+ /* update pot/encoder */
+ _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
+ }
}
void
-Strip::notify_panner_azi_changed (bool force_update)
+Strip::notify_eq_change (AutomationType type, uint32_t band, bool force_update)
{
- if (_route) {
+ boost::shared_ptr<Stripable> r = _surface->mcp().subview_stripable();
+
+ if (!r) {
+ /* not in subview mode */
+ return;
+ }
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan change for strip %1\n", _index));
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::EQ) {
+ /* no longer in EQ subview mode */
+ return;
+ }
- boost::shared_ptr<Pannable> pannable = _route->pannable();
+ boost::shared_ptr<AutomationControl> control;
- if (!pannable || !_route->panner()) {
- _surface->write (_vpot->zero());
- return;
- }
+ switch (type) {
+ case EQGain:
+ control = r->eq_gain_controllable (band);
+ break;
+ case EQFrequency:
+ control = r->eq_freq_controllable (band);
+ break;
+ case EQQ:
+ control = r->eq_q_controllable (band);
+ break;
+ case EQShape:
+ control = r->eq_shape_controllable (band);
+ break;
+ case EQEnable:
+ control = r->eq_enable_controllable ();
+ break;
+#ifndef MIXBUS32C
+ case EQHPF:
+ control = r->eq_hpf_controllable ();
+ break;
+#endif
+ default:
+ break;
+ }
- Control* control = control_by_parameter[PanAzimuthAutomation];
+ if (control) {
+ float val = control->get_value();
+ do_parameter_display (type, val);
+ /* update pot/encoder */
+ _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
+ }
+}
- if (!control) {
- return;
- }
+void
+Strip::notify_dyn_change (AutomationType type, bool force_update, bool propagate_mode)
+{
+ boost::shared_ptr<Stripable> r = _surface->mcp().subview_stripable();
- double pos = pannable->pan_azimuth_control->internal_to_interface (pannable->pan_azimuth_control->get_value());
+ if (!r) {
+ /* not in subview mode */
+ return;
+ }
- if (force_update || pos != _last_pan_azi_position_written) {
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::Dynamics) {
+ /* no longer in EQ subview mode */
+ return;
+ }
- if (control == _fader) {
- if (!_fader->in_use()) {
- _surface->write (_fader->set_position (pos));
- queue_parameter_display (PanAzimuthAutomation, pos);
- }
- } else if (control == _vpot) {
- _surface->write (_vpot->set (pos, true, Pot::dot));
- queue_parameter_display (PanAzimuthAutomation, pos);
- }
+ boost::shared_ptr<AutomationControl> control;
+ bool reset_all = false;
- queue_parameter_display (PanAzimuthAutomation, pos);
- _last_pan_azi_position_written = pos;
- }
+ switch (type) {
+ case CompThreshold:
+ control = r->comp_threshold_controllable ();
+ break;
+ case CompSpeed:
+ control = r->comp_speed_controllable ();
+ break;
+ case CompMode:
+ control = r->comp_mode_controllable ();
+ reset_all = true;
+ break;
+ case CompMakeup:
+ control = r->comp_makeup_controllable ();
+ break;
+ case CompEnable:
+ control = r->comp_enable_controllable ();
+ break;
+#ifdef MIXBUS32C
+ case EQHPF:
+ control = r->eq_hpf_controllable ();
+ break;
+ case EQLPF:
+ control = r->eq_lpf_controllable ();
+ break;
+ case EQFilterEnable:
+ control = r->filter_enable_controllable ();
+ break;
+#endif
+ default:
+ break;
+ }
+
+ if (propagate_mode && reset_all) {
+ _surface->subview_mode_changed ();
+ }
+
+ if (control) {
+ float val = control->get_value();
+ do_parameter_display (type, val);
+ /* update pot/encoder */
+ _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
}
}
void
-Strip::notify_panner_width_changed (bool force_update)
+Strip::notify_panner_azi_changed (bool force_update)
{
- if (_route) {
+ if (!_stripable) {
+ return;
+ }
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan width change for strip %1\n", _index));
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan change for strip %1\n", _index));
- boost::shared_ptr<Pannable> pannable = _route->pannable();
+ boost::shared_ptr<AutomationControl> pan_control = _stripable->pan_azimuth_control ();
- if (!pannable || !_route->panner()) {
- _surface->write (_vpot->zero());
- return;
- }
+ if (!pan_control) {
+ /* basically impossible, since we're here because that control
+ * changed, but sure, whatever.
+ */
+ return;
+ }
+ if (_vpot->control() != pan_control) {
+ return;
+ }
- Control* control = control_by_parameter[PanWidthAutomation];
+ double normalized_pos = pan_control->internal_to_interface (pan_control->get_value());
+ double internal_pos = pan_control->get_value();
- if (!control) {
- return;
- }
+ if (force_update || (normalized_pos != _last_pan_azi_position_written)) {
- double pos = pannable->pan_width_control->internal_to_interface (pannable->pan_width_control->get_value());
+ _surface->write (_vpot->set (normalized_pos, true, Pot::dot));
+ /* show actual internal value to user */
+ do_parameter_display (PanAzimuthAutomation, internal_pos);
- if (force_update || pos != _last_pan_azi_position_written) {
+ _last_pan_azi_position_written = normalized_pos;
+ }
+}
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+void
+Strip::notify_panner_width_changed (bool force_update)
+{
+ if (!_stripable) {
+ return;
+ }
- if (control == _fader) {
- if (!control->in_use()) {
- _surface->write (_fader->set_position (pos));
- queue_parameter_display (PanWidthAutomation, pos);
- }
- }
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan width change for strip %1\n", _index));
- } else if (control == _vpot) {
- _surface->write (_vpot->set (pos, true, Pot::spread));
- queue_parameter_display (PanWidthAutomation, pos);
- }
+ boost::shared_ptr<AutomationControl> pan_control = _stripable->pan_width_control ();
- queue_parameter_display (PanWidthAutomation, pos);
- _last_pan_azi_position_written = pos;
- }
+ if (!pan_control) {
+ /* basically impossible, since we're here because that control
+ * changed, but sure, whatever.
+ */
+ return;
+ }
+
+ if (_vpot->control() != pan_control) {
+ return;
+ }
+
+ double pos = pan_control->internal_to_interface (pan_control->get_value());
+
+ if (force_update || pos != _last_pan_width_position_written) {
+
+ _surface->write (_vpot->set (pos, true, Pot::spread));
+ do_parameter_display (PanWidthAutomation, pos);
+
+ _last_pan_width_position_written = pos;
}
}
return;
}
- if (ms & MackieControlProtocol::MODIFIER_SHIFT) {
- /* reset to default */
- boost::shared_ptr<AutomationControl> ac = _fader->control ();
- if (ac) {
- ac->set_value (ac->normal());
- }
- return;
- }
-
DEBUG_TRACE (DEBUG::MackieControl, "add select button on press\n");
_surface->mcp().add_down_select_button (_surface->number(), _index);
- _surface->mcp().select_range ();
+ _surface->mcp().select_range (_surface->mcp().global_index (*this));
} else {
DEBUG_TRACE (DEBUG::MackieControl, "remove select button on release\n");
void
Strip::vselect_event (Button&, ButtonState bs)
{
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+
+ /* most subview modes: vpot press acts like a button for toggle parameters */
+
+ if (bs != press) {
+ return;
+ }
+
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::Sends) {
+
+ boost::shared_ptr<AutomationControl> control = _vpot->control ();
+ if (!control) {
+ return;
+ }
+
+ Controllable::GroupControlDisposition gcd;
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
+ }
+
+ if (control->toggled()) {
+ if (control->toggled()) {
+ control->set_value (!control->get_value(), gcd);
+ }
+
+ } else if (control->desc().enumeration || control->desc().integer_step) {
+
+ double val = control->get_value ();
+ if (val <= control->upper() - 1.0) {
+ control->set_value (val + 1.0, gcd);
+ } else {
+ control->set_value (control->lower(), gcd);
+ }
+ }
+
+ } else {
+
+ /* Send mode: press enables/disables the relevant
+ * send, but the vpot is bound to the send-level so we
+ * need to lookup the enable/disable control
+ * explicitly.
+ */
+
+ boost::shared_ptr<Stripable> r = _surface->mcp().subview_stripable();
+
+ if (r) {
+
+ const uint32_t global_pos = _surface->mcp().global_index (*this);
+ boost::shared_ptr<AutomationControl> control = r->send_enable_controllable (global_pos);
+
+ if (control) {
+ bool currently_enabled = (bool) control->get_value();
+ Controllable::GroupControlDisposition gcd;
+
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
+ }
+
+ control->set_value (!currently_enabled, gcd);
+
+ if (currently_enabled) {
+ /* we just turned it off */
+ pending_display[1] = "off";
+ } else {
+ /* we just turned it on, show the level
+ */
+ control = _stripable->send_level_controllable (global_pos);
+ do_parameter_display (BusSendLevel, control->get_value());
+ }
+ }
+ }
+ }
+
+ /* done with this event in subview mode */
+
+ return;
+ }
+
if (bs == press) {
int ms = _surface->mcp().main_modifier_state();
if (ac) {
/* reset to default/normal value */
- ac->set_value (ac->normal());
+ ac->set_value (ac->normal(), Controllable::NoGroup);
}
} else {
+#ifdef MIXBUS
+ if (_stripable) {
+ boost::shared_ptr<AutomationControl> ac = _stripable->master_send_enable_controllable ();
+ if (ac) {
+ Controllable::GroupControlDisposition gcd;
+
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
+ }
+
+ bool enabled = ac->get_value();
+ ac->set_value (!enabled, gcd);
+ }
+ }
+#else
DEBUG_TRACE (DEBUG::MackieControl, "switching to next pot mode\n");
+ /* switch vpot to control next available parameter */
next_pot_mode ();
+#endif
}
}
boost::shared_ptr<AutomationControl> ac = _fader->control ();
- if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
- if (ac) {
- ac->set_value (ac->normal());
- }
- } else {
-
- _fader->set_in_use (true);
- _fader->start_touch (_surface->mcp().transport_frame());
+ _fader->set_in_use (true);
+ _fader->start_touch (_surface->mcp().transport_frame());
- if (ac) {
- queue_parameter_display ((AutomationType) ac->parameter().type(), ac->internal_to_interface (ac->get_value()));
- }
+ if (ac) {
+ do_parameter_display ((AutomationType) ac->parameter().type(), ac->get_value());
}
} else {
DEBUG_TRACE (DEBUG::MackieControl, "add button on press\n");
_surface->mcp().add_down_button ((AutomationType) control->parameter().type(), _surface->number(), _index);
- float new_value;
- int ms = _surface->mcp().main_modifier_state();
-
- if (ms & MackieControlProtocol::MODIFIER_SHIFT) {
- /* reset to default/normal value */
- new_value = control->normal();
- } else {
- new_value = control->get_value() ? 0.0 : 1.0;
- }
+ float new_value = control->get_value() ? 0.0 : 1.0;
/* get all controls that either have their
* button down or are within a range of
* several down buttons
*/
- MackieControlProtocol::ControlList controls = _surface->mcp().down_controls ((AutomationType) control->parameter().type());
+ MackieControlProtocol::ControlList controls = _surface->mcp().down_controls ((AutomationType) control->parameter().type(),
+ _surface->mcp().global_index(*this));
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("there are %1 buttons down for control type %2, new value = %3\n",
controls.size(), control->parameter().type(), new_value));
- /* apply change */
+ /* apply change, with potential modifier semantics */
+
+ Controllable::GroupControlDisposition gcd;
+
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
+ }
for (MackieControlProtocol::ControlList::iterator c = controls.begin(); c != controls.end(); ++c) {
- (*c)->set_value (new_value);
+ (*c)->set_value (new_value, gcd);
}
} else {
}
}
-void
-Strip::queue_parameter_display (AutomationType type, float val)
-{
- RedisplayRequest req;
-
- req.type = type;
- req.val = val;
-
- redisplay_requests.write (&req, 1);
-}
-
void
Strip::do_parameter_display (AutomationType type, float val)
{
bool screen_hold = false;
+ char buf[16];
switch (type) {
case GainAutomation:
if (val == 0.0) {
- _surface->write (display (1, " -inf "));
+ pending_display[1] = " -inf ";
} else {
- char buf[16];
float dB = accurate_coefficient_to_dB (val);
snprintf (buf, sizeof (buf), "%6.1f", dB);
- _surface->write (display (1, buf));
+ pending_display[1] = buf;
screen_hold = true;
}
break;
- case PanAzimuthAutomation:
- if (_route) {
- boost::shared_ptr<Pannable> p = _route->pannable();
- if (p && _route->panner()) {
- string str =_route->panner()->value_as_string (p->pan_azimuth_control);
- _surface->write (display (1, str));
- screen_hold = true;
+ case BusSendLevel:
+ if (Profile->get_mixbus()) { //Mixbus sends are already stored in dB
+ snprintf (buf, sizeof (buf), "%2.1f", val);
+ pending_display[1] = buf;
+ screen_hold = true;
+ } else {
+ if (val == 0.0) {
+ pending_display[1] = " -inf ";
+ } else {
+ float dB = accurate_coefficient_to_dB (val);
+ snprintf (buf, sizeof (buf), "%6.1f", dB);
+ pending_display[1] = buf;
+ screen_hold = true;
+ }
+ }
+ break;
+
+ case PanAzimuthAutomation:
+ if (Profile->get_mixbus()) {
+ snprintf (buf, sizeof (buf), "%2.1f", val);
+ pending_display[1] = buf;
+ screen_hold = true;
+ } else {
+ if (_stripable) {
+ boost::shared_ptr<AutomationControl> pa = _stripable->pan_azimuth_control();
+ if (pa) {
+ pending_display[1] = pa->get_user_string ();
+ screen_hold = true;
+ }
}
}
break;
case PanWidthAutomation:
- if (_route) {
- char buf[16];
+ if (_stripable) {
snprintf (buf, sizeof (buf), "%5ld%%", lrintf ((val * 200.0)-100));
- _surface->write (display (1, buf));
+ pending_display[1] = buf;
screen_hold = true;
}
break;
case TrimAutomation:
- if (_route) {
- char buf[16];
+ if (_stripable) {
float dB = accurate_coefficient_to_dB (val);
snprintf (buf, sizeof (buf), "%6.1f", dB);
- _surface->write (display (1, buf));
+ pending_display[1] = buf;
+ screen_hold = true;
}
break;
+ case PhaseAutomation:
+ if (_stripable) {
+ if (val < 0.5) {
+ pending_display[1] = "Normal";
+ } else {
+ pending_display[1] = "Invert";
+ }
+ screen_hold = true;
+ }
+ break;
+
+ case EQGain:
+ case EQFrequency:
+ case EQQ:
+ case EQShape:
+ case EQHPF:
+ case EQLPF:
+ case CompThreshold:
+ case CompSpeed:
+ case CompMakeup:
+ case CompRedux:
+ snprintf (buf, sizeof (buf), "%6.1f", val);
+ pending_display[1] = buf;
+ screen_hold = true;
+ break;
+ case EQFilterEnable:
+ case EQEnable:
+ case CompEnable:
+ if (val >= 0.5) {
+ pending_display[1] = "on";
+ } else {
+ pending_display[1] = "off";
+ }
+ break;
+ case CompMode:
+ if (_surface->mcp().subview_stripable()) {
+ pending_display[1] = _surface->mcp().subview_stripable()->comp_mode_name (val);
+ }
+ break;
+ case SoloSafeAutomation:
+ case SoloIsolateAutomation:
+ if (val >= 0.5) {
+ pending_display[1] = "on";
+ } else {
+ pending_display[1] = "off";
+ }
+ break;
+ case MonitoringAutomation:
+ switch (MonitorChoice ((int) val)) {
+ case MonitorAuto:
+ pending_display[1] = "auto";
+ break;
+ case MonitorInput:
+ pending_display[1] = "input";
+ break;
+ case MonitorDisk:
+ pending_display[1] = "disk";
+ break;
+ case MonitorCue: /* XXX not implemented as of jan 2016 */
+ pending_display[1] = "cue";
+ break;
+ }
+ break;
default:
break;
}
if (screen_hold) {
+ /* we just queued up a parameter to be displayed.
+ 1 second from now, switch back to vpot mode display.
+ */
block_vpot_mode_display_for (1000);
}
}
Strip::handle_fader (Fader& fader, float position)
{
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("fader to %1\n", position));
+ boost::shared_ptr<AutomationControl> ac = fader.control();
+ if (!ac) {
+ return;
+ }
+
+ Controllable::GroupControlDisposition gcd = Controllable::UseGroup;
- fader.set_value (position);
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ }
+
+ fader.set_value (position, gcd);
/* From the Mackie Control MIDI implementation docs:
*/
boost::shared_ptr<AutomationControl> ac = pot.control();
- double p = pot.get_value ();
- p += delta;
- p = max (ac->lower(), p);
- p = min (ac->upper(), p);
- pot.set_value (p);
-}
+ if (!ac) {
+ return;
+ }
-void
-Strip::periodic (ARDOUR::microseconds_t now)
-{
- bool reshow_vpot_mode = false;
- bool reshow_name = false;
+ Controllable::GroupControlDisposition gcd;
- if (!_route) {
- return;
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
}
- if (_block_screen_redisplay_until >= now) {
+ if (ac->toggled()) {
- /* no drawing here, for now */
- return;
+ /* make it like a single-step, directional switch */
- } else if (_block_screen_redisplay_until) {
+ if (delta > 0) {
+ ac->set_value (1.0, gcd);
+ } else {
+ ac->set_value (0.0, gcd);
+ }
- /* timeout reached, reset */
+ } else if (ac->desc().enumeration || ac->desc().integer_step) {
- _block_screen_redisplay_until = 0;
- reshow_vpot_mode = true;
- reshow_name = true;
- }
+ /* use Controllable::get_value() to avoid the
+ * "scaling-to-interface" that takes place in
+ * Control::get_value() via the pot member.
+ *
+ * an enumeration with 4 values will have interface values of
+ * 0.0, 0.25, 0.5 and 0.75 or some similar oddness. Lets not
+ * deal with that.
+ */
- if (_block_vpot_mode_redisplay_until >= now) {
- return;
- } else if (_block_vpot_mode_redisplay_until) {
+ if (delta > 0) {
+ ac->set_value (min (ac->upper(), ac->get_value() + 1.0), gcd);
+ } else {
+ ac->set_value (max (ac->lower(), ac->get_value() - 1.0), gcd);
+ }
- /* timeout reached, reset */
+ } else {
- _block_vpot_mode_redisplay_until = 0;
- reshow_vpot_mode = true;
- }
+ double p = ac->get_interface();
- if (reshow_name) {
- show_route_name ();
- }
+ p += delta;
- if (reshow_vpot_mode) {
- return_to_vpot_mode_display ();
- } else {
- /* no point doing this if we just switched back to vpot mode
- display */
- update_automation ();
+ p = max (0.0, p);
+ p = min (1.0, p);
+
+ ac->set_value ( ac->interface_to_internal(p), gcd);
}
+}
+void
+Strip::periodic (ARDOUR::microseconds_t now)
+{
update_meter ();
+ update_automation ();
}
void
-Strip::redisplay (ARDOUR::microseconds_t now)
+Strip::redisplay (ARDOUR::microseconds_t now, bool force)
{
- RedisplayRequest req;
- bool have_request = false;
+ if (_block_screen_redisplay_until >= now) {
+ /* no drawing allowed */
+ return;
+ }
- while (redisplay_requests.read (&req, 1) == 1) {
- /* read them all */
- have_request = true;
+ if (_block_screen_redisplay_until) {
+ /* we were blocked, but the time period has elapsed, so we must
+ * force a redraw.
+ */
+ force = true;
+ _block_screen_redisplay_until = 0;
}
- if (_block_screen_redisplay_until >= now) {
- return;
+ if (force || (current_display[0] != pending_display[0])) {
+ _surface->write (display (0, pending_display[0]));
+ current_display[0] = pending_display[0];
+ }
+
+ if (return_to_vpot_mode_display_at <= now) {
+ return_to_vpot_mode_display_at = UINT64_MAX;
+ return_to_vpot_mode_display ();
}
- if (have_request) {
- do_parameter_display (req.type, req.val);
+ if (force || (current_display[1] != pending_display[1])) {
+ _surface->write (display (1, pending_display[1]));
+ current_display[1] = pending_display[1];
}
}
void
Strip::update_automation ()
{
- ARDOUR::AutoState gain_state = _route->gain_control()->automation_state();
+ if (!_stripable) {
+ return;
+ }
+
+ ARDOUR::AutoState state = _stripable->gain_control()->automation_state();
- if (gain_state == Touch || gain_state == Play) {
+ if (state == Touch || state == Play) {
notify_gain_changed (false);
}
- if (_route->panner()) {
- ARDOUR::AutoState panner_state = _route->panner()->automation_state();
- if (panner_state == Touch || panner_state == Play) {
+ boost::shared_ptr<AutomationControl> pan_control = _stripable->pan_azimuth_control ();
+ if (pan_control) {
+ state = pan_control->automation_state ();
+ if (state == Touch || state == Play) {
notify_panner_azi_changed (false);
- notify_panner_width_changed (false);
}
}
- if (_route->trim()) {
- ARDOUR::AutoState trim_state = _route->trim_control()->automation_state();
- if (trim_state == Touch || trim_state == Play) {
- notify_trim_changed (false);
+
+ pan_control = _stripable->pan_width_control ();
+ if (pan_control) {
+ state = pan_control->automation_state ();
+ if (state == Touch || state == Play) {
+ notify_panner_width_changed (false);
}
}
}
void
Strip::update_meter ()
{
- if (_meter && _transport_is_rolling && _metering_active) {
- float dB = const_cast<PeakMeter&> (_route->peak_meter()).meter_level (0, MeterMCP);
+ if (!_stripable) {
+ return;
+ }
+
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return;
+ }
+
+ if (_meter && _transport_is_rolling && _metering_active && _stripable->peak_meter()) {
+ float dB = _stripable->peak_meter()->meter_level (0, MeterMCP);
_meter->send_update (*_surface, dB);
+ return;
}
}
_surface->write (blank_display (0));
_surface->write (blank_display (1));
+ pending_display[0] = string();
+ pending_display[1] = string();
+ current_display[0] = string();
+ current_display[1] = string();
}
MidiByteArray
_controls_locked = false;
}
-void
-Strip::gui_selection_changed (const ARDOUR::StrongRouteNotificationList& rl)
+string
+Strip::vpot_mode_string ()
{
- for (ARDOUR::StrongRouteNotificationList::const_iterator i = rl.begin(); i != rl.end(); ++i) {
- if ((*i) == _route) {
- _surface->write (_select->set_state (on));
- return;
- }
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return string();
}
- _surface->write (_select->set_state (off));
-}
-
-string
-Strip::vpot_mode_string () const
-{
boost::shared_ptr<AutomationControl> ac = _vpot->control();
if (!ac) {
return string();
}
- switch (ac->parameter().type()) {
- case GainAutomation:
- return "Fader";
- case TrimAutomation:
- return "Trim";
+ switch (ac->desc().type) {
case PanAzimuthAutomation:
return "Pan";
case PanWidthAutomation:
return "F/Rear";
case PanLFEAutomation:
return "LFE";
+ default:
+ break;
}
+#ifdef MIXBUS
+ //"None" mode, by definition (currently) shows the pan control above the fader.
+ //Mixbus controllers are created from a LADSPA so they don't have ac->desc().type
+ //For the forseeable future, we will just return "Pan" here.
+ return "Pan";
+#endif
return "???";
}
- void
-Strip::potmode_changed (bool notify)
+void
+Strip::flip_mode_changed ()
{
- if (!_route) {
- return;
- }
+ if (_surface->mcp().subview_mode() == MackieControlProtocol::Sends) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* do not change vpot mode while in flipped mode */
- DEBUG_TRACE (DEBUG::MackieControl, "not stepping pot mode - in flip mode\n");
- _surface->write (display (1, "Flip"));
- block_vpot_mode_display_for (1000);
- return;
- }
- // WIP
- int pm = _surface->mcp().pot_mode();
- switch (pm) {
- case MackieControlProtocol::Pan:
- // This needs to set current pan mode (azimuth or width... or whatever)
- set_vpot_parameter (_pan_mode);
- DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Pan mode.\n");
- break;
- case MackieControlProtocol::Tracks: // should change the Tracks to Trim
- DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Trim mode.\n");
- set_vpot_parameter (TrimAutomation);
- break;
- case MackieControlProtocol::Send:
- DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Send mode.\n");
- // set to current send
- break;
- default:
- break;
- }
+ boost::shared_ptr<AutomationControl> pot_control = _vpot->control();
+ boost::shared_ptr<AutomationControl> fader_control = _fader->control();
- if (notify) {
- notify_all ();
- }
-}
+ if (pot_control && fader_control) {
-void
-Strip::flip_mode_changed (bool notify)
-{
- if (!_route) {
- return;
- }
+ _vpot->set_control (fader_control);
+ _fader->set_control (pot_control);
- reset_saved_values ();
+ /* update fader with pot value */
- boost::shared_ptr<AutomationControl> fader_controllable = _fader->control ();
- boost::shared_ptr<AutomationControl> vpot_controllable = _vpot->control ();
+ _surface->write (_fader->set_position (pot_control->internal_to_interface (pot_control->get_value ())));
- _fader->set_control (vpot_controllable);
- _vpot->set_control (fader_controllable);
+ /* update pot with fader value */
- control_by_parameter[fader_controllable->parameter()] = _vpot;
- control_by_parameter[vpot_controllable->parameter()] = _fader;
+ _surface->write (_vpot->set (fader_control->internal_to_interface (fader_control->get_value()), true, Pot::wrap));
- _surface->write (display (1, vpot_mode_string ()));
- if (notify) {
- notify_all ();
+ if (_surface->mcp().flip_mode() == MackieControlProtocol::Normal) {
+ do_parameter_display (GainAutomation, fader_control->get_value());
+ } else {
+ do_parameter_display (BusSendLevel, pot_control->get_value());
+ }
+
+ }
+
+ } else {
+ /* do nothing */
}
}
void
Strip::block_vpot_mode_display_for (uint32_t msecs)
{
- _block_vpot_mode_redisplay_until = ARDOUR::get_microseconds() + (msecs * 1000);
+ return_to_vpot_mode_display_at = ARDOUR::get_microseconds() + (msecs * 1000);
}
void
back the mode where it shows what the VPot controls.
*/
- if (_route) {
- _surface->write (display (1, vpot_mode_string()));
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ /* do nothing - second line shows value of current subview parameter */
+ return;
+ } else if (_stripable) {
+ pending_display[1] = vpot_mode_string();
} else {
- _surface->write (blank_display (1));
+ pending_display[1] = string();
}
}
void
Strip::next_pot_mode ()
{
- vector<Evoral::Parameter>::iterator i;
+ vector<AutomationType>::iterator i;
if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
/* do not change vpot mode while in flipped mode */
DEBUG_TRACE (DEBUG::MackieControl, "not stepping pot mode - in flip mode\n");
- _surface->write (display (1, "Flip"));
+ pending_display[1] = "Flip";
block_vpot_mode_display_for (1000);
return;
}
if (!ac) {
return;
}
- if (_surface->mcp().pot_mode() == MackieControlProtocol::Pan) {
- if (possible_pot_parameters.empty() || (possible_pot_parameters.size() == 1 && possible_pot_parameters.front() == ac->parameter())) {
- return;
+
+
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return;
+ }
+
+ if (possible_pot_parameters.empty() || (possible_pot_parameters.size() == 1 && possible_pot_parameters.front() == ac->parameter().type())) {
+ return;
+ }
+
+ for (i = possible_pot_parameters.begin(); i != possible_pot_parameters.end(); ++i) {
+ if ((*i) == ac->parameter().type()) {
+ break;
}
+ }
- for (i = possible_pot_parameters.begin(); i != possible_pot_parameters.end(); ++i) {
- if ((*i) == ac->parameter()) {
- break;
- }
+ /* move to the next mode in the list, or back to the start (which will
+ also happen if the current mode is not in the current pot mode list)
+ */
+
+ if (i != possible_pot_parameters.end()) {
+ ++i;
+ }
+
+ if (i == possible_pot_parameters.end()) {
+ i = possible_pot_parameters.begin();
+ }
+
+ set_vpot_parameter (*i);
+}
+
+void
+Strip::subview_mode_changed ()
+{
+ boost::shared_ptr<Stripable> r = _surface->mcp().subview_stripable();
+
+ subview_connections.drop_connections ();
+
+ switch (_surface->mcp().subview_mode()) {
+ case MackieControlProtocol::None:
+ set_vpot_parameter (_pan_mode);
+ /* need to show strip name again */
+ show_stripable_name ();
+ if (!_stripable) {
+ _surface->write (_vpot->set (0, true, Pot::wrap));
+ _surface->write (_fader->set_position (0.0));
}
+ notify_metering_state_changed ();
+ eq_band = -1;
+ break;
- /* move to the next mode in the list, or back to the start (which will
- also happen if the current mode is not in the current pot mode list)
- */
+ case MackieControlProtocol::EQ:
+ if (r) {
+ setup_eq_vpot (r);
+ } else {
+ /* leave it as it was */
+ }
+ break;
- if (i != possible_pot_parameters.end()) {
- ++i;
+ case MackieControlProtocol::Dynamics:
+ if (r) {
+ setup_dyn_vpot (r);
+ } else {
+ /* leave it as it was */
}
+ eq_band = -1;
+ break;
- if (i == possible_pot_parameters.end()) {
- i = possible_pot_parameters.begin();
+ case MackieControlProtocol::Sends:
+ if (r) {
+ setup_sends_vpot (r);
+ } else {
+ /* leave it as it was */
+ }
+ eq_band = -1;
+ break;
+ case MackieControlProtocol::TrackView:
+ if (r) {
+ setup_trackview_vpot (r);
+ } else {
+ /* leave it as it was */
}
- set_vpot_parameter (*i);
+ eq_band = -1;
+ break;
}
}
void
-Strip::set_vpot_parameter (Evoral::Parameter p)
+Strip::setup_dyn_vpot (boost::shared_ptr<Stripable> r)
{
- boost::shared_ptr<Pannable> pannable;
+ if (!r) {
+ return;
+ }
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("switch to vpot mode %1\n", p));
+ boost::shared_ptr<AutomationControl> tc = r->comp_threshold_controllable ();
+ boost::shared_ptr<AutomationControl> sc = r->comp_speed_controllable ();
+ boost::shared_ptr<AutomationControl> mc = r->comp_mode_controllable ();
+ boost::shared_ptr<AutomationControl> kc = r->comp_makeup_controllable ();
+ boost::shared_ptr<AutomationControl> ec = r->comp_enable_controllable ();
- reset_saved_values ();
- for (int i = 0; i <= TrimAutomation; ++i) {
- if (control_by_parameter[i] == _vpot) {
- control_by_parameter[i] = 0;
+#ifdef MIXBUS32C //Mixbus32C needs to spill the filter controls into the comp section
+ boost::shared_ptr<AutomationControl> hpfc = r->eq_hpf_controllable ();
+ boost::shared_ptr<AutomationControl> lpfc = r->eq_lpf_controllable ();
+ boost::shared_ptr<AutomationControl> fec = r->filter_enable_controllable ();
+#endif
+
+ uint32_t pos = _surface->mcp().global_index (*this);
+
+ /* we will control the pos-th available parameter, from the list in the
+ * order shown above.
+ */
+
+ vector<boost::shared_ptr<AutomationControl> > available;
+ vector<AutomationType> params;
+
+ if (tc) { available.push_back (tc); params.push_back (CompThreshold); }
+ if (sc) { available.push_back (sc); params.push_back (CompSpeed); }
+ if (mc) { available.push_back (mc); params.push_back (CompMode); }
+ if (kc) { available.push_back (kc); params.push_back (CompMakeup); }
+ if (ec) { available.push_back (ec); params.push_back (CompEnable); }
+
+#ifdef MIXBUS32C //Mixbus32C needs to spill the filter controls into the comp section
+ if (hpfc) { available.push_back (hpfc); params.push_back (EQHPF); }
+ if (lpfc) { available.push_back (lpfc); params.push_back (EQLPF); }
+ if (fec) { available.push_back (fec); params.push_back (EQFilterEnable); }
+#endif
+
+ if (pos >= available.size()) {
+ /* this knob is not needed to control the available parameters */
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ pending_display[0] = string();
+ pending_display[1] = string();
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> pc;
+ AutomationType param;
+
+ pc = available[pos];
+ param = params[pos];
+
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_dyn_change, this, param, false, true), ui_context());
+ _vpot->set_control (pc);
+
+ string pot_id;
+
+ switch (param) {
+ case CompThreshold:
+ pot_id = "Thresh";
+ break;
+ case CompSpeed:
+ if (mc) {
+ pot_id = r->comp_speed_name (mc->get_value());
+ } else {
+ pot_id = "Speed";
}
+ break;
+ case CompMode:
+ pot_id = "Mode";
+ break;
+ case CompMakeup:
+ pot_id = "Makeup";
+ break;
+ case CompRedux:
+ pot_id = "Redux";
+ break;
+#ifdef MIXBUS32C
+ case CompEnable:
+ pot_id = "CompIn";
+ break;
+ case EQHPF:
+ pot_id = "HPF";
+ break;
+ case EQLPF:
+ pot_id = "LPF";
+ break;
+ case EQFilterEnable:
+ pot_id = "FiltIn";
+ break;
+#else
+ case CompEnable:
+ pot_id = "on/off";
+ break;
+#endif
+ default:
+ break;
}
- switch (p.type()) {
- case PanAzimuthAutomation:
- _pan_mode = PanAzimuthAutomation;
- pannable = _route->pannable ();
- if (pannable) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, pan azi to fader */
- _vpot->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- if (pannable) {
- _fader->set_control (pannable->pan_azimuth_control);
- control_by_parameter[PanAzimuthAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanAzimuthAutomation] = 0;
- }
- } else {
- /* gain to fader, pan azi to vpot */
- _fader->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _fader;
- if (pannable) {
- _vpot->set_control (pannable->pan_azimuth_control);
- control_by_parameter[PanAzimuthAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanAzimuthAutomation] = 0;
- }
- }
+ if (!pot_id.empty()) {
+ pending_display[0] = pot_id;
+ } else {
+ pending_display[0] = string();
+ }
+
+ notify_dyn_change (param, true, false);
+}
+
+void
+Strip::setup_eq_vpot (boost::shared_ptr<Stripable> r)
+{
+ uint32_t bands = r->eq_band_cnt ();
+
+ if (bands == 0) {
+ /* should never get here */
+ return;
+ }
+
+ /* figure out how many params per band are available */
+
+ boost::shared_ptr<AutomationControl> pc;
+ uint32_t params_per_band = 0;
+
+ if ((pc = r->eq_gain_controllable (0))) {
+ params_per_band += 1;
+ }
+ if ((pc = r->eq_freq_controllable (0))) {
+ params_per_band += 1;
+ }
+ if ((pc = r->eq_q_controllable (0))) {
+ params_per_band += 1;
+ }
+ if ((pc = r->eq_shape_controllable (0))) {
+ params_per_band += 1;
+ }
+
+ /* pick the one for this strip, based on its global position across
+ * all surfaces
+ */
+
+ pc.reset ();
+
+ const uint32_t total_band_parameters = bands * params_per_band;
+ const uint32_t global_pos = _surface->mcp().global_index (*this);
+ AutomationType param = NullAutomation;
+ string band_name;
+
+ eq_band = -1;
+
+ if (global_pos < total_band_parameters) {
+
+ /* show a parameter for an EQ band */
+
+ const uint32_t parameter = global_pos % params_per_band;
+ eq_band = global_pos / params_per_band;
+ band_name = r->eq_band_name (eq_band);
+
+ switch (parameter) {
+#ifdef MIXBUS32C //in 32C, we swap the order of freq/gain to match the GUI
+ case 0:
+ pc = r->eq_freq_controllable (eq_band);
+ param = EQFrequency;
+ break;
+ case 1:
+ pc = r->eq_gain_controllable (eq_band);
+ param = EQGain;
+ break;
+#else
+ case 0:
+ pc = r->eq_gain_controllable (eq_band);
+ param = EQGain;
+ break;
+ case 1:
+ pc = r->eq_freq_controllable (eq_band);
+ param = EQFrequency;
+ break;
+#endif
+ case 2:
+ pc = r->eq_q_controllable (eq_band);
+ param = EQQ;
+ break;
+ case 3:
+ pc = r->eq_shape_controllable (eq_band);
+ param = EQShape;
+ break;
+ }
+
+ } else {
+
+ /* show a non-band parameter (HPF or enable)
+ */
+
+ uint32_t parameter = global_pos - total_band_parameters;
+
+ switch (parameter) {
+#ifndef MIXBUS32C
+ case 0: /* first control after band parameters */
+ pc = r->eq_hpf_controllable();
+ param = EQHPF;
+ break;
+ case 1: /* second control after band parameters */
+ pc = r->eq_enable_controllable();
+ param = EQEnable;
+ break;
+#endif
+ default:
+ /* nothing to control */
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ pending_display[0] = string();
+ pending_display[1] = string();
+ /* done */
+ return;
+ break;
+ }
+
+ }
+
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_eq_change, this, param, eq_band, false), ui_context());
+ _vpot->set_control (pc);
+
+ string pot_id;
+
+ switch (param) {
+ case EQGain:
+ pot_id = band_name + "Gain";
+ break;
+ case EQFrequency:
+ pot_id = band_name + "Freq";
+ break;
+ case EQQ:
+ pot_id = band_name + " Q";
+ break;
+ case EQShape:
+ pot_id = band_name + " Shp";
+ break;
+ case EQEnable:
+ pot_id = "on/off";
+ break;
+#ifndef MIXBUS32C
+ case EQHPF:
+ pot_id = "HPFreq";
+ break;
+#endif
+ default:
+ break;
+ }
+
+ if (!pot_id.empty()) {
+ pending_display[0] = pot_id;
+ } else {
+ pending_display[0] = string();
+ }
+
+ notify_eq_change (param, eq_band, true);
+ }
+}
+
+void
+Strip::setup_sends_vpot (boost::shared_ptr<Stripable> r)
+{
+ if (!r) {
+ return;
+ }
+
+ const uint32_t global_pos = _surface->mcp().global_index (*this);
+
+ boost::shared_ptr<AutomationControl> pc = r->send_level_controllable (global_pos);
+
+ if (!pc) {
+ /* nothing to control */
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ pending_display[0] = string();
+ pending_display[1] = string();
+ return;
+ }
+
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_send_level_change, this, BusSendLevel, global_pos, false), ui_context());
+ _vpot->set_control (pc);
+
+ pending_display[0] = PBD::short_version (r->send_name (global_pos), 6);
+
+ notify_send_level_change (BusSendLevel, global_pos, true);
+}
+
+void
+Strip::setup_trackview_vpot (boost::shared_ptr<Stripable> r)
+{
+ if (!r) {
+ return;
+ }
+
+ const uint32_t global_pos = _surface->mcp().global_index (*this);
+
+ if (global_pos >= 8) {
+ /* nothing to control */
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ pending_display[0] = string();
+ pending_display[1] = string();
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> pc;
+ boost::shared_ptr<Track> track = boost::dynamic_pointer_cast<Track> (r);
+ string label;
+
+ switch (global_pos) {
+ case 0:
+ pc = r->trim_control ();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, TrimAutomation, global_pos, false), ui_context());
+ pending_display[0] = "Trim";
+ notify_trackview_change (TrimAutomation, global_pos, true);
}
break;
- case PanWidthAutomation:
- _pan_mode = PanWidthAutomation;
- pannable = _route->pannable ();
- if (pannable) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, pan width to fader */
- _vpot->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- if (pannable) {
- _fader->set_control (pannable->pan_width_control);
- control_by_parameter[PanWidthAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanWidthAutomation] = 0;
- }
- } else {
- /* gain to fader, pan width to vpot */
- _fader->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _fader;
- if (pannable) {
- _vpot->set_control (pannable->pan_width_control);
- control_by_parameter[PanWidthAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanWidthAutomation] = 0;
- }
+ case 1:
+ if (track) {
+ pc = track->monitoring_control();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, MonitoringAutomation, global_pos, false), ui_context());
+ pending_display[0] = "Mon";
+ notify_trackview_change (MonitoringAutomation, global_pos, true);
}
}
break;
+ case 2:
+ pc = r->solo_isolate_control ();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, SoloIsolateAutomation, global_pos, false), ui_context());
+ notify_trackview_change (SoloIsolateAutomation, global_pos, true);
+ pending_display[0] = "S-Iso";
+ }
+ break;
+ case 3:
+ pc = r->solo_safe_control ();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, SoloSafeAutomation, global_pos, false), ui_context());
+ notify_trackview_change (SoloSafeAutomation, global_pos, true);
+ pending_display[0] = "S-Safe";
+ }
+ break;
+ case 4:
+ pc = r->phase_control();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, PhaseAutomation, global_pos, false), ui_context());
+ notify_trackview_change (PhaseAutomation, global_pos, true);
+ pending_display[0] = "Phase";
+ }
+ break;
+ case 5:
+ // pc = r->trim_control ();
+ break;
+ case 6:
+ // pc = r->trim_control ();
+ break;
+ case 7:
+ // pc = r->trim_control ();
+ break;
+ }
+
+ if (!pc) {
+ pending_display[0] = string();
+ pending_display[1] = string();
+ return;
+ }
+
+ _vpot->set_control (pc);
+}
+
+void
+Strip::set_vpot_parameter (AutomationType p)
+{
+ if (!_stripable || (p == NullAutomation)) {
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ pending_display[1] = string();
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> pan_control;
+
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("switch to vpot mode %1\n", p));
+
+ reset_saved_values ();
+
+ switch (p) {
+ case PanAzimuthAutomation:
+ pan_control = _stripable->pan_azimuth_control ();
+ break;
+ case PanWidthAutomation:
+ pan_control = _stripable->pan_width_control ();
+ break;
case PanElevationAutomation:
break;
case PanFrontBackAutomation:
break;
case PanLFEAutomation:
break;
- case TrimAutomation:
- if (_route->trim()) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, trim to fader */
- _vpot->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- _fader->set_control (_route->trim_control());
- control_by_parameter[TrimAutomation] = _fader;
- } else {
- /* gain to fader, trim to vpot */
- _fader->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _fader;
- _vpot->set_control (_route->trim_control());
- control_by_parameter[TrimAutomation] = _vpot;
- }
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[TrimAutomation] = 0;
- }
- break;
default:
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("vpot mode %1 not known.\n", p));
- break;
+ return;
+ }
+ if (pan_control) {
+ _pan_mode = p;
+ _vpot->set_control (pan_control);
}
- _surface->write (display (1, vpot_mode_string()));
+ pending_display[1] = vpot_mode_string ();
+}
+
+bool
+Strip::is_midi_track () const
+{
+ return boost::dynamic_pointer_cast<MidiTrack>(_stripable) != 0;
}
void
void
Strip::notify_metering_state_changed()
{
- if (!_route || !_meter) {
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return;
+ }
+
+ if (!_stripable || !_meter) {
return;
}