#include "ardour/debug.h"
#include "ardour/midi_ui.h"
#include "ardour/meter.h"
+#include "ardour/monitor_control.h"
#include "ardour/plugin_insert.h"
#include "ardour/pannable.h"
#include "ardour/panner.h"
#include "ardour/panner_shell.h"
+#include "ardour/phase_control.h"
#include "ardour/rc_configuration.h"
+#include "ardour/record_enable_control.h"
#include "ardour/route.h"
#include "ardour/session.h"
#include "ardour/send.h"
+#include "ardour/solo_isolate_control.h"
#include "ardour/track.h"
#include "ardour/midi_track.h"
#include "ardour/user_bundle.h"
, return_to_vpot_mode_display_at (UINT64_MAX)
, eq_band (-1)
, _pan_mode (PanAzimuthAutomation)
- , vpot_parameter (PanAzimuthAutomation)
, _last_gain_position_written (-1.0)
, _last_pan_azi_position_written (-1.0)
, _last_pan_width_position_written (-1.0)
, _last_trim_position_written (-1.0)
- , _current_send (0)
{
_fader = dynamic_cast<Fader*> (Fader::factory (*_surface, index, "fader", *this));
_vpot = dynamic_cast<Pot*> (Pot::factory (*_surface, Pot::ID + index, "vpot", *this));
}
void
-Strip::set_route (boost::shared_ptr<Route> r, bool /*with_messages*/)
+Strip::set_stripable (boost::shared_ptr<Stripable> r, bool /*with_messages*/)
{
if (_controls_locked) {
return;
mb_pan_controllable.reset();
- route_connections.drop_connections ();
+ stripable_connections.drop_connections ();
_solo->set_control (boost::shared_ptr<AutomationControl>());
_mute->set_control (boost::shared_ptr<AutomationControl>());
_fader->set_control (boost::shared_ptr<AutomationControl>());
_vpot->set_control (boost::shared_ptr<AutomationControl>());
- _route = r;
-
- control_by_parameter.clear ();
-
- control_by_parameter[PanAzimuthAutomation] = (Control*) 0;
- control_by_parameter[PanWidthAutomation] = (Control*) 0;
- control_by_parameter[PanElevationAutomation] = (Control*) 0;
- control_by_parameter[PanFrontBackAutomation] = (Control*) 0;
- control_by_parameter[PanLFEAutomation] = (Control*) 0;
- control_by_parameter[GainAutomation] = (Control*) 0;
- control_by_parameter[PhaseAutomation] = (Control*) 0;
+ _stripable = r;
reset_saved_values ();
if (!r) {
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Surface %1 Strip %2 mapped to null route\n", _surface->number(), _index));
zero ();
return;
}
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Surface %1 strip %2 now mapping route %3\n",
- _surface->number(), _index, _route->name()));
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Surface %1 strip %2 now mapping stripable %3\n",
+ _surface->number(), _index, _stripable->name()));
- _solo->set_control (_route->solo_control());
- _mute->set_control (_route->mute_control());
+ _solo->set_control (_stripable->solo_control());
+ _mute->set_control (_stripable->mute_control());
- _route->solo_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
- _route->listen_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
+ _stripable->solo_control()->Changed.connect (stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
+ _stripable->mute_control()->Changed.connect(stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_mute_changed, this), ui_context());
- _route->mute_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_mute_changed, this), ui_context());
-
- boost::shared_ptr<AutomationControl> pan_control = _route->pan_azimuth_control();
+ boost::shared_ptr<AutomationControl> pan_control = _stripable->pan_azimuth_control();
if (pan_control) {
- pan_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_azi_changed, this, false), ui_context());
+ pan_control->Changed.connect(stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_azi_changed, this, false), ui_context());
}
- pan_control = _route->pan_width_control();
+ pan_control = _stripable->pan_width_control();
if (pan_control) {
- pan_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_width_changed, this, false), ui_context());
+ pan_control->Changed.connect(stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_width_changed, this, false), ui_context());
}
- _route->gain_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_gain_changed, this, false), ui_context());
- _route->PropertyChanged.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_property_changed, this, _1), ui_context());
+ _stripable->gain_control()->Changed.connect(stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_gain_changed, this, false), ui_context());
+ _stripable->PropertyChanged.connect (stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_property_changed, this, _1), ui_context());
+ _stripable->presentation_info().PropertyChanged.connect (stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_property_changed, this, _1), ui_context());
- boost::shared_ptr<Track> trk = boost::dynamic_pointer_cast<ARDOUR::Track>(_route);
+ boost::shared_ptr<AutomationControl> rec_enable_control = _stripable->rec_enable_control ();
- if (trk) {
- _recenable->set_control (trk->rec_enable_control());
- trk->rec_enable_control()->Changed .connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_record_enable_changed, this), ui_context());
+ if (rec_enable_control) {
+ _recenable->set_control (rec_enable_control);
+ rec_enable_control->Changed.connect (stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_record_enable_changed, this), ui_context());
}
- // TODO this works when a currently-banked route is made inactive, but not
- // when a route is activated which should be currently banked.
+ // TODO this works when a currently-banked stripable is made inactive, but not
+ // when a stripable is activated which should be currently banked.
- _route->active_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_active_changed, this), ui_context());
- _route->DropReferences.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_route_deleted, this), ui_context());
+ _stripable->DropReferences.connect (stripable_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_stripable_deleted, this), ui_context());
- /* setup legal VPot modes for this route */
+ /* setup legal VPot modes for this stripable */
possible_pot_parameters.clear();
- if (_route->pan_azimuth_control()) {
+ if (_stripable->pan_azimuth_control()) {
possible_pot_parameters.push_back (PanAzimuthAutomation);
}
- if (_route->pan_width_control()) {
+ if (_stripable->pan_width_control()) {
possible_pot_parameters.push_back (PanWidthAutomation);
}
- if (_route->pan_elevation_control()) {
+ if (_stripable->pan_elevation_control()) {
possible_pot_parameters.push_back (PanElevationAutomation);
}
- if (_route->pan_frontback_control()) {
+ if (_stripable->pan_frontback_control()) {
possible_pot_parameters.push_back (PanFrontBackAutomation);
}
- if (_route->pan_lfe_control()) {
+ if (_stripable->pan_lfe_control()) {
possible_pot_parameters.push_back (PanLFEAutomation);
}
- if (_route->phase_invert().size()) {
- possible_trim_parameters.push_back (PhaseAutomation);
- _route->phase_control()->set_channel(0);
- }
- _current_send = 0;
- /* Update */
_pan_mode = PanAzimuthAutomation;
- potmode_changed (false);
- notify_all ();
+ if (_surface->mcp().subview_mode() == MackieControlProtocol::None) {
+ set_vpot_parameter (_pan_mode);
+ }
+
+ _fader->set_control (_stripable->gain_control());
+
+ notify_all ();
}
void
Strip::notify_all()
{
- if (!_route) {
+ if (!_stripable) {
zero ();
return;
}
notify_mute_changed ();
notify_gain_changed ();
notify_property_changed (PBD::PropertyChange (ARDOUR::Properties::name));
+ notify_property_changed (PBD::PropertyChange (ARDOUR::Properties::selected));
notify_panner_azi_changed ();
notify_panner_width_changed ();
notify_record_enable_changed ();
void
Strip::notify_solo_changed ()
{
- if (_route && _solo) {
- _surface->write (_solo->set_state ((_route->soloed() || _route->listening_via_monitor()) ? on : off));
+ if (_stripable && _solo) {
+ _surface->write (_solo->set_state (_stripable->solo_control()->soloed() ? on : off));
}
}
Strip::notify_mute_changed ()
{
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Strip %1 mute changed\n", _index));
- if (_route && _mute) {
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("\troute muted ? %1\n", _route->muted()));
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("mute message: %1\n", _mute->set_state (_route->muted() ? on : off)));
+ if (_stripable && _mute) {
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("\tstripable muted ? %1\n", _stripable->mute_control()->muted()));
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("mute message: %1\n", _mute->set_state (_stripable->mute_control()->muted() ? on : off)));
- _surface->write (_mute->set_state (_route->muted() ? on : off));
+ _surface->write (_mute->set_state (_stripable->mute_control()->muted() ? on : off));
}
}
void
Strip::notify_record_enable_changed ()
{
- if (_route && _recenable) {
- _surface->write (_recenable->set_state (_route->record_enabled() ? on : off));
+ if (_stripable && _recenable) {
+ boost::shared_ptr<Track> trk = boost::dynamic_pointer_cast<Track> (_stripable);
+ if (trk) {
+ _surface->write (_recenable->set_state (trk->rec_enable_control()->get_value() ? on : off));
+ }
}
}
void
-Strip::notify_active_changed ()
-{
- _surface->mcp().refresh_current_bank();
-}
-
-void
-Strip::notify_route_deleted ()
+Strip::notify_stripable_deleted ()
{
+ _surface->mcp().notify_stripable_removed ();
_surface->mcp().refresh_current_bank();
}
void
Strip::notify_gain_changed (bool force_update)
{
- if (_route) {
+ if (!_stripable) {
+ return;
+ }
- Control* control;
+ boost::shared_ptr<AutomationControl> ac = _stripable->gain_control();
+ Control* control;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- control = _vpot;
- } else {
- control = _fader;
- }
+ if (!ac) {
+ /* doesn't seem possible but lets be safe */
+ return;
+ }
- boost::shared_ptr<AutomationControl> ac = _route->gain_control();
+ /* track gain control could be on vpot or fader, depending in
+ * flip mode.
+ */
- float gain_coefficient = ac->get_value();
- float normalized_position = ac->internal_to_interface (gain_coefficient);
+ if (_vpot->control() == ac) {
+ control = _vpot;
+ } else if (_fader->control() == ac) {
+ control = _fader;
+ } else {
+ return;
+ }
- if (force_update || normalized_position != _last_gain_position_written) {
+ float gain_coefficient = ac->get_value();
+ float normalized_position = ac->internal_to_interface (gain_coefficient);
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- if (!control->in_use()) {
- _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
- }
- do_parameter_display (GainAutomation, gain_coefficient);
+ if (force_update || normalized_position != _last_gain_position_written) {
+
+ if (!control->in_use()) {
+ if (control == _vpot) {
+ _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
} else {
- if (!control->in_use()) {
- _surface->write (_fader->set_position (normalized_position));
- }
- do_parameter_display (GainAutomation, gain_coefficient);
+ _surface->write (_fader->set_position (normalized_position));
}
-
- _last_gain_position_written = normalized_position;
}
+
+ do_parameter_display (GainAutomation, gain_coefficient);
+ _last_gain_position_written = normalized_position;
}
}
void
Strip::notify_property_changed (const PropertyChange& what_changed)
{
- if (!what_changed.contains (ARDOUR::Properties::name)) {
- return;
+ if (what_changed.contains (ARDOUR::Properties::name)) {
+ show_stripable_name ();
}
- show_route_name ();
+ if (what_changed.contains (ARDOUR::Properties::selected)) {
+ if (_stripable) {
+ _surface->write (_select->set_state (_stripable->is_selected()));
+ }
+ }
}
void
-Strip::show_route_name ()
+Strip::show_stripable_name ()
{
MackieControlProtocol::SubViewMode svm = _surface->mcp().subview_mode();
}
string fullname = string();
- if (!_route) {
- // make sure first three strips get cleared of view mode
- if (_index > 2) {
- return;
- }
+ if (!_stripable) {
+ fullname = string();
} else {
- fullname = _route->name();
+ fullname = _stripable->name();
}
- string line1;
if (fullname.length() <= 6) {
- line1 = fullname;
+ pending_display[0] = fullname;
} else {
- line1 = PBD::short_version (fullname, 6);
+ pending_display[0] = PBD::short_version (fullname, 6);
}
-
- pending_display[0] = line1;
}
void
Strip::notify_send_level_change (AutomationType type, uint32_t send_num, bool force_update)
{
- boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+ boost::shared_ptr<Stripable> r = _surface->mcp().subview_stripable();
if (!r) {
/* not in subview mode */
if (control) {
float val = control->get_value();
do_parameter_display (type, val);
- /* update pot/encoder */
- _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
+
+ if (_vpot->control() == control) {
+ /* update pot/encoder */
+ _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
+ }
}
}
void
Strip::notify_trackview_change (AutomationType type, uint32_t send_num, bool force_update)
{
- boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+ boost::shared_ptr<Stripable> r = _surface->mcp().subview_stripable();
if (!r) {
/* not in subview mode */
}
boost::shared_ptr<AutomationControl> control;
-
boost::shared_ptr<Track> track = boost::dynamic_pointer_cast<Track> (r);
-
+
switch (type) {
case TrimAutomation:
control = r->trim_control();
if (control) {
float val = control->get_value();
- if (control->desc().enumeration || control->desc().integer_step) {
- do_parameter_display (type, val);
- } else {
- do_parameter_display (type, control->internal_to_interface (val));
- }
+
+ /* Note: all of the displayed controllables require the display
+ * of their *actual* ("internal") value, not the version mapped
+ * into the normalized 0..1.0 ("interface") range.
+ */
+
+ do_parameter_display (type, val);
/* update pot/encoder */
_surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
}
void
Strip::notify_eq_change (AutomationType type, uint32_t band, bool force_update)
{
- boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+ boost::shared_ptr<Stripable> r = _surface->mcp().subview_stripable();
if (!r) {
/* not in subview mode */
case EQShape:
control = r->eq_shape_controllable (band);
break;
- case EQHPF:
- control = r->eq_hpf_controllable ();
- break;
case EQEnable:
control = r->eq_enable_controllable ();
break;
+#ifndef MIXBUS32C
+ case EQHPF:
+ control = r->eq_hpf_controllable ();
+ break;
+#endif
default:
break;
}
void
Strip::notify_dyn_change (AutomationType type, bool force_update, bool propagate_mode)
{
- boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+ boost::shared_ptr<Stripable> r = _surface->mcp().subview_stripable();
if (!r) {
/* not in subview mode */
case CompMakeup:
control = r->comp_makeup_controllable ();
break;
- case CompRedux:
- control = r->comp_redux_controllable ();
- break;
case CompEnable:
control = r->comp_enable_controllable ();
break;
+#ifdef MIXBUS32C
+ case EQHPF:
+ control = r->eq_hpf_controllable ();
+ break;
+ case EQLPF:
+ control = r->eq_lpf_controllable ();
+ break;
+ case EQFilterEnable:
+ control = r->filter_enable_controllable ();
+ break;
+#endif
default:
break;
}
void
Strip::notify_panner_azi_changed (bool force_update)
{
- if (!_route) {
+ if (!_stripable) {
return;
}
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan change for strip %1\n", _index));
- boost::shared_ptr<AutomationControl> pan_control = _route->pan_azimuth_control ();
+ boost::shared_ptr<AutomationControl> pan_control = _stripable->pan_azimuth_control ();
if (!pan_control) {
+ /* basically impossible, since we're here because that control
+ * changed, but sure, whatever.
+ */
return;
}
- Control* control = 0;
- ControlParameterMap::iterator i = control_by_parameter.find (PanAzimuthAutomation);
-
- if (i == control_by_parameter.end()) {
+ if (_vpot->control() != pan_control) {
return;
}
- control = i->second;
-
double normalized_pos = pan_control->internal_to_interface (pan_control->get_value());
double internal_pos = pan_control->get_value();
if (force_update || (normalized_pos != _last_pan_azi_position_written)) {
- if (control == _fader) {
- if (!_fader->in_use()) {
- _surface->write (_fader->set_position (normalized_pos));
- /* show actual internal value to user */
- do_parameter_display (PanAzimuthAutomation, internal_pos);
- }
- } else if (control == _vpot) {
- _surface->write (_vpot->set (normalized_pos, true, Pot::dot));
- /* show actual internal value to user */
- do_parameter_display (PanAzimuthAutomation, internal_pos);
- }
+ _surface->write (_vpot->set (normalized_pos, true, Pot::dot));
+ /* show actual internal value to user */
+ do_parameter_display (PanAzimuthAutomation, internal_pos);
_last_pan_azi_position_written = normalized_pos;
}
void
Strip::notify_panner_width_changed (bool force_update)
{
- if (!_route) {
+ if (!_stripable) {
return;
}
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan width change for strip %1\n", _index));
- boost::shared_ptr<AutomationControl> pan_control = _route->pan_width_control ();
+ boost::shared_ptr<AutomationControl> pan_control = _stripable->pan_width_control ();
if (!pan_control) {
+ /* basically impossible, since we're here because that control
+ * changed, but sure, whatever.
+ */
return;
}
- Control* control = 0;
- ControlParameterMap::iterator i = control_by_parameter.find (PanWidthAutomation);
-
- if (i == control_by_parameter.end()) {
+ if (_vpot->control() != pan_control) {
return;
}
- control = i->second;
-
double pos = pan_control->internal_to_interface (pan_control->get_value());
if (force_update || pos != _last_pan_width_position_written) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
-
- if (control == _fader) {
- if (!control->in_use()) {
- _surface->write (_fader->set_position (pos));
- do_parameter_display (PanWidthAutomation, pos);
- }
- }
-
- } else if (control == _vpot) {
- _surface->write (_vpot->set (pos, true, Pot::spread));
- do_parameter_display (PanWidthAutomation, pos);
- }
+ _surface->write (_vpot->set (pos, true, Pot::spread));
+ do_parameter_display (PanWidthAutomation, pos);
_last_pan_width_position_written = pos;
}
return;
}
- if (ms & MackieControlProtocol::MODIFIER_SHIFT) {
- /* reset to default */
- boost::shared_ptr<AutomationControl> ac = _fader->control ();
- if (ac) {
- ac->set_value (ac->normal(), Controllable::NoGroup);
- }
- return;
- }
-
DEBUG_TRACE (DEBUG::MackieControl, "add select button on press\n");
_surface->mcp().add_down_select_button (_surface->number(), _index);
- _surface->mcp().select_range ();
+ _surface->mcp().select_range (_surface->mcp().global_index (*this));
} else {
DEBUG_TRACE (DEBUG::MackieControl, "remove select button on release\n");
* explicitly.
*/
- boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+ boost::shared_ptr<Stripable> r = _surface->mcp().subview_stripable();
if (r) {
} else {
/* we just turned it on, show the level
*/
- control = _route->send_level_controllable (global_pos);
+ control = _stripable->send_level_controllable (global_pos);
do_parameter_display (BusSendLevel, control->get_value());
}
}
} else {
#ifdef MIXBUS
- if (_route) {
- boost::shared_ptr<AutomationControl> ac = _route->master_send_enable_controllable ();
+ if (_stripable) {
+ boost::shared_ptr<AutomationControl> ac = _stripable->master_send_enable_controllable ();
if (ac) {
Controllable::GroupControlDisposition gcd;
bool enabled = ac->get_value();
ac->set_value (!enabled, gcd);
}
+ }
#else
DEBUG_TRACE (DEBUG::MackieControl, "switching to next pot mode\n");
+ /* switch vpot to control next available parameter */
next_pot_mode ();
#endif
}
* several down buttons
*/
- MackieControlProtocol::ControlList controls = _surface->mcp().down_controls ((AutomationType) control->parameter().type());
+ MackieControlProtocol::ControlList controls = _surface->mcp().down_controls ((AutomationType) control->parameter().type(),
+ _surface->mcp().global_index(*this));
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("there are %1 buttons down for control type %2, new value = %3\n",
}
break;
+ case BusSendLevel:
+ if (Profile->get_mixbus()) { //Mixbus sends are already stored in dB
+ snprintf (buf, sizeof (buf), "%2.1f", val);
+ pending_display[1] = buf;
+ screen_hold = true;
+ } else {
+ if (val == 0.0) {
+ pending_display[1] = " -inf ";
+ } else {
+ float dB = accurate_coefficient_to_dB (val);
+ snprintf (buf, sizeof (buf), "%6.1f", dB);
+ pending_display[1] = buf;
+ screen_hold = true;
+ }
+ }
+ break;
+
case PanAzimuthAutomation:
if (Profile->get_mixbus()) {
snprintf (buf, sizeof (buf), "%2.1f", val);
pending_display[1] = buf;
screen_hold = true;
} else {
- if (_route) {
- boost::shared_ptr<Pannable> p = _route->pannable();
- if (p && _route->panner()) {
- pending_display[1] =_route->panner()->value_as_string (p->pan_azimuth_control);
+ if (_stripable) {
+ boost::shared_ptr<AutomationControl> pa = _stripable->pan_azimuth_control();
+ if (pa) {
+ pending_display[1] = pa->get_user_string ();
screen_hold = true;
}
}
break;
case PanWidthAutomation:
- if (_route) {
+ if (_stripable) {
snprintf (buf, sizeof (buf), "%5ld%%", lrintf ((val * 200.0)-100));
pending_display[1] = buf;
screen_hold = true;
break;
case TrimAutomation:
- if (_route) {
+ if (_stripable) {
float dB = accurate_coefficient_to_dB (val);
snprintf (buf, sizeof (buf), "%6.1f", dB);
pending_display[1] = buf;
break;
case PhaseAutomation:
- if (_route) {
+ if (_stripable) {
if (val < 0.5) {
pending_display[1] = "Normal";
} else {
}
break;
- case BusSendLevel:
- if (_route) {
- float dB = accurate_coefficient_to_dB (val);
- snprintf (buf, sizeof (buf), "%6.1f", dB);
- pending_display[1] = buf;
- screen_hold = true;
- }
- break;
-
case EQGain:
case EQFrequency:
case EQQ:
case EQShape:
case EQHPF:
+ case EQLPF:
case CompThreshold:
case CompSpeed:
case CompMakeup:
pending_display[1] = buf;
screen_hold = true;
break;
+ case EQFilterEnable:
case EQEnable:
case CompEnable:
if (val >= 0.5) {
}
break;
case CompMode:
- if (_surface->mcp().subview_route()) {
- pending_display[1] = _surface->mcp().subview_route()->comp_mode_name (val);
+ if (_surface->mcp().subview_stripable()) {
+ pending_display[1] = _surface->mcp().subview_stripable()->comp_mode_name (val);
}
break;
case SoloSafeAutomation:
} else {
- double p = ac->get_value();
+ double p = ac->get_interface();
p += delta;
- p = max (ac->lower(), p);
- p = min (ac->upper(), p);
+ p = max (0.0, p);
+ p = min (1.0, p);
- ac->set_value (p, gcd);
+ ac->set_value ( ac->interface_to_internal(p), gcd);
}
}
void
Strip::update_automation ()
{
- if (!_route) {
+ if (!_stripable) {
return;
}
- ARDOUR::AutoState state = _route->gain_control()->automation_state();
+ ARDOUR::AutoState state = _stripable->gain_control()->automation_state();
if (state == Touch || state == Play) {
notify_gain_changed (false);
}
- boost::shared_ptr<AutomationControl> pan_control = _route->pan_azimuth_control ();
+ boost::shared_ptr<AutomationControl> pan_control = _stripable->pan_azimuth_control ();
if (pan_control) {
state = pan_control->automation_state ();
if (state == Touch || state == Play) {
}
}
- pan_control = _route->pan_width_control ();
+ pan_control = _stripable->pan_width_control ();
if (pan_control) {
state = pan_control->automation_state ();
if (state == Touch || state == Play) {
void
Strip::update_meter ()
{
- if (!_route) {
+ if (!_stripable) {
return;
}
return;
}
- if (_meter && _transport_is_rolling && _metering_active) {
- float dB = const_cast<PeakMeter&> (_route->peak_meter()).meter_level (0, MeterMCP);
+ if (_meter && _transport_is_rolling && _metering_active && _stripable->peak_meter()) {
+ float dB = _stripable->peak_meter()->meter_level (0, MeterMCP);
_meter->send_update (*_surface, dB);
return;
}
_controls_locked = false;
}
-void
-Strip::gui_selection_changed (const ARDOUR::StrongRouteNotificationList& rl)
-{
- for (ARDOUR::StrongRouteNotificationList::const_iterator i = rl.begin(); i != rl.end(); ++i) {
- if ((*i) == _route) {
- _surface->write (_select->set_state (on));
- return;
- }
- }
-
- _surface->write (_select->set_state (off));
-}
-
string
Strip::vpot_mode_string ()
{
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return string();
+ }
+
boost::shared_ptr<AutomationControl> ac = _vpot->control();
+
if (!ac) {
return string();
}
- if (control_by_parameter.find (GainAutomation)->second == _vpot) {
- return "Fader";
- } else if (control_by_parameter.find (TrimAutomation)->second == _vpot) {
- return "Trim";
- } else if (control_by_parameter.find (PhaseAutomation)->second == _vpot) {
- return string_compose ("Phase%1", _route->phase_control()->channel() + 1);
- } else if (control_by_parameter.find (PanAzimuthAutomation)->second == _vpot) {
+ switch (ac->desc().type) {
+ case PanAzimuthAutomation:
return "Pan";
- } else if (control_by_parameter.find (PanWidthAutomation)->second == _vpot) {
+ case PanWidthAutomation:
return "Width";
- } else if (control_by_parameter.find (PanElevationAutomation)->second == _vpot) {
+ case PanElevationAutomation:
return "Elev";
- } else if (control_by_parameter.find (PanFrontBackAutomation)->second == _vpot) {
+ case PanFrontBackAutomation:
return "F/Rear";
- } else if (control_by_parameter.find (PanLFEAutomation)->second == _vpot) {
+ case PanLFEAutomation:
return "LFE";
+ default:
+ break;
}
-
- if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
- return string();
- }
+#ifdef MIXBUS
+ //"None" mode, by definition (currently) shows the pan control above the fader.
+ //Mixbus controllers are created from a LADSPA so they don't have ac->desc().type
+ //For the forseeable future, we will just return "Pan" here.
+ return "Pan";
+#endif
return "???";
}
- void
-Strip::potmode_changed (bool notify)
+void
+Strip::flip_mode_changed ()
{
- if (!_route) {
- return;
- }
+ if (_surface->mcp().subview_mode() == MackieControlProtocol::Sends) {
- // WIP
- int pm = _surface->mcp().pot_mode();
- switch (pm) {
- case MackieControlProtocol::Pan:
- // This needs to set current pan mode (azimuth or width... or whatever)
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Assign pot to Pan mode %1\n", enum_2_string (_pan_mode)));
- set_vpot_parameter (_pan_mode);
- break;
- }
+ boost::shared_ptr<AutomationControl> pot_control = _vpot->control();
+ boost::shared_ptr<AutomationControl> fader_control = _fader->control();
- if (notify) {
- notify_all ();
+ if (pot_control && fader_control) {
+
+ _vpot->set_control (fader_control);
+ _fader->set_control (pot_control);
+
+ /* update fader with pot value */
+
+ _surface->write (_fader->set_position (pot_control->internal_to_interface (pot_control->get_value ())));
+
+ /* update pot with fader value */
+
+ _surface->write (_vpot->set (fader_control->internal_to_interface (fader_control->get_value()), true, Pot::wrap));
+
+
+ if (_surface->mcp().flip_mode() == MackieControlProtocol::Normal) {
+ do_parameter_display (GainAutomation, fader_control->get_value());
+ } else {
+ do_parameter_display (BusSendLevel, pot_control->get_value());
+ }
+
+ }
+
+ } else {
+ /* do nothing */
}
}
if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
/* do nothing - second line shows value of current subview parameter */
return;
- } else if (_route) {
+ } else if (_stripable) {
pending_display[1] = vpot_mode_string();
} else {
pending_display[1] = string();
}
- if (_surface->mcp().pot_mode() == MackieControlProtocol::Pan) {
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return;
+ }
- if (possible_pot_parameters.empty() || (possible_pot_parameters.size() == 1 && possible_pot_parameters.front() == ac->parameter().type())) {
- return;
- }
+ if (possible_pot_parameters.empty() || (possible_pot_parameters.size() == 1 && possible_pot_parameters.front() == ac->parameter().type())) {
+ return;
+ }
- for (i = possible_pot_parameters.begin(); i != possible_pot_parameters.end(); ++i) {
- if ((*i) == ac->parameter().type()) {
- break;
- }
+ for (i = possible_pot_parameters.begin(); i != possible_pot_parameters.end(); ++i) {
+ if ((*i) == ac->parameter().type()) {
+ break;
}
+ }
- /* move to the next mode in the list, or back to the start (which will
- also happen if the current mode is not in the current pot mode list)
- */
-
- if (i != possible_pot_parameters.end()) {
- ++i;
- }
+ /* move to the next mode in the list, or back to the start (which will
+ also happen if the current mode is not in the current pot mode list)
+ */
- if (i == possible_pot_parameters.end()) {
- i = possible_pot_parameters.begin();
- }
+ if (i != possible_pot_parameters.end()) {
+ ++i;
+ }
- set_vpot_parameter (*i);
+ if (i == possible_pot_parameters.end()) {
+ i = possible_pot_parameters.begin();
}
+
+ set_vpot_parameter (*i);
}
void
Strip::subview_mode_changed ()
{
- boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+ boost::shared_ptr<Stripable> r = _surface->mcp().subview_stripable();
subview_connections.drop_connections ();
switch (_surface->mcp().subview_mode()) {
case MackieControlProtocol::None:
- set_vpot_parameter (vpot_parameter);
+ set_vpot_parameter (_pan_mode);
/* need to show strip name again */
- show_route_name ();
+ show_stripable_name ();
+ if (!_stripable) {
+ _surface->write (_vpot->set (0, true, Pot::wrap));
+ _surface->write (_fader->set_position (0.0));
+ }
notify_metering_state_changed ();
eq_band = -1;
break;
}
void
-Strip::setup_dyn_vpot (boost::shared_ptr<Route> r)
+Strip::setup_dyn_vpot (boost::shared_ptr<Stripable> r)
{
if (!r) {
return;
boost::shared_ptr<AutomationControl> sc = r->comp_speed_controllable ();
boost::shared_ptr<AutomationControl> mc = r->comp_mode_controllable ();
boost::shared_ptr<AutomationControl> kc = r->comp_makeup_controllable ();
- boost::shared_ptr<AutomationControl> rc = r->comp_redux_controllable ();
boost::shared_ptr<AutomationControl> ec = r->comp_enable_controllable ();
+#ifdef MIXBUS32C //Mixbus32C needs to spill the filter controls into the comp section
+ boost::shared_ptr<AutomationControl> hpfc = r->eq_hpf_controllable ();
+ boost::shared_ptr<AutomationControl> lpfc = r->eq_lpf_controllable ();
+ boost::shared_ptr<AutomationControl> fec = r->filter_enable_controllable ();
+#endif
+
uint32_t pos = _surface->mcp().global_index (*this);
/* we will control the pos-th available parameter, from the list in the
if (sc) { available.push_back (sc); params.push_back (CompSpeed); }
if (mc) { available.push_back (mc); params.push_back (CompMode); }
if (kc) { available.push_back (kc); params.push_back (CompMakeup); }
- if (rc) { available.push_back (rc); params.push_back (CompRedux); }
if (ec) { available.push_back (ec); params.push_back (CompEnable); }
+#ifdef MIXBUS32C //Mixbus32C needs to spill the filter controls into the comp section
+ if (hpfc) { available.push_back (hpfc); params.push_back (EQHPF); }
+ if (lpfc) { available.push_back (lpfc); params.push_back (EQLPF); }
+ if (fec) { available.push_back (fec); params.push_back (EQFilterEnable); }
+#endif
+
if (pos >= available.size()) {
/* this knob is not needed to control the available parameters */
_vpot->set_control (boost::shared_ptr<AutomationControl>());
case CompRedux:
pot_id = "Redux";
break;
+#ifdef MIXBUS32C
+ case CompEnable:
+ pot_id = "CompIn";
+ break;
+ case EQHPF:
+ pot_id = "HPF";
+ break;
+ case EQLPF:
+ pot_id = "LPF";
+ break;
+ case EQFilterEnable:
+ pot_id = "FiltIn";
+ break;
+#else
case CompEnable:
pot_id = "on/off";
break;
+#endif
default:
break;
}
}
void
-Strip::setup_eq_vpot (boost::shared_ptr<Route> r)
+Strip::setup_eq_vpot (boost::shared_ptr<Stripable> r)
{
uint32_t bands = r->eq_band_cnt ();
band_name = r->eq_band_name (eq_band);
switch (parameter) {
+#ifdef MIXBUS32C //in 32C, we swap the order of freq/gain to match the GUI
+ case 0:
+ pc = r->eq_freq_controllable (eq_band);
+ param = EQFrequency;
+ break;
+ case 1:
+ pc = r->eq_gain_controllable (eq_band);
+ param = EQGain;
+ break;
+#else
case 0:
pc = r->eq_gain_controllable (eq_band);
param = EQGain;
pc = r->eq_freq_controllable (eq_band);
param = EQFrequency;
break;
+#endif
case 2:
pc = r->eq_q_controllable (eq_band);
param = EQQ;
uint32_t parameter = global_pos - total_band_parameters;
switch (parameter) {
+#ifndef MIXBUS32C
case 0: /* first control after band parameters */
pc = r->eq_hpf_controllable();
param = EQHPF;
pc = r->eq_enable_controllable();
param = EQEnable;
break;
+#endif
default:
/* nothing to control */
_vpot->set_control (boost::shared_ptr<AutomationControl>());
case EQShape:
pot_id = band_name + " Shp";
break;
- case EQHPF:
- pot_id = "HPFreq";
- break;
case EQEnable:
pot_id = "on/off";
break;
+#ifndef MIXBUS32C
+ case EQHPF:
+ pot_id = "HPFreq";
+ break;
+#endif
default:
break;
}
}
void
-Strip::setup_sends_vpot (boost::shared_ptr<Route> r)
+Strip::setup_sends_vpot (boost::shared_ptr<Stripable> r)
{
if (!r) {
return;
boost::shared_ptr<AutomationControl> pc = r->send_level_controllable (global_pos);
if (!pc) {
+ /* nothing to control */
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
pending_display[0] = string();
pending_display[1] = string();
return;
pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_send_level_change, this, BusSendLevel, global_pos, false), ui_context());
_vpot->set_control (pc);
- pending_display[0] = r->send_name (global_pos);
+ pending_display[0] = PBD::short_version (r->send_name (global_pos), 6);
notify_send_level_change (BusSendLevel, global_pos, true);
}
void
-Strip::setup_trackview_vpot (boost::shared_ptr<Route> r)
+Strip::setup_trackview_vpot (boost::shared_ptr<Stripable> r)
{
if (!r) {
return;
const uint32_t global_pos = _surface->mcp().global_index (*this);
if (global_pos >= 8) {
+ /* nothing to control */
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
pending_display[0] = string();
pending_display[1] = string();
return;
void
Strip::set_vpot_parameter (AutomationType p)
{
- if (!_route || (p == NullAutomation)) {
- control_by_parameter[vpot_parameter] = 0;
- vpot_parameter = NullAutomation;
+ if (!_stripable || (p == NullAutomation)) {
_vpot->set_control (boost::shared_ptr<AutomationControl>());
pending_display[1] = string();
return;
reset_saved_values ();
- /* unset any mapping between the vpot and any existing parameters */
-
- for (ControlParameterMap::iterator i = control_by_parameter.begin(); i != control_by_parameter.end(); ++i) {
-
- if (i != control_by_parameter.end() && i->second == _vpot) {
- i->second = 0;
- }
- }
-
switch (p) {
case PanAzimuthAutomation:
- if ((pan_control = _route->pan_azimuth_control ())) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- _pan_mode = PanAzimuthAutomation;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, pan azi to fader */
- _vpot->set_control (_route->gain_control());
- vpot_parameter = GainAutomation;
- control_by_parameter[GainAutomation] = _vpot;
- _fader->set_control (pan_control);
- control_by_parameter[PanAzimuthAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanAzimuthAutomation] = 0;
- }
- } else {
- /* gain to fader, pan azi to vpot */
- vpot_parameter = PanAzimuthAutomation;
- _fader->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _fader;
- _vpot->set_control (pan_control);
- control_by_parameter[PanAzimuthAutomation] = _vpot;
- }
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanAzimuthAutomation] = 0;
- }
+ pan_control = _stripable->pan_azimuth_control ();
break;
-
case PanWidthAutomation:
- if ((pan_control = _route->pan_width_control ())) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- _pan_mode = PanWidthAutomation;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, pan width to fader */
- _vpot->set_control (_route->gain_control());
- vpot_parameter = GainAutomation;
- control_by_parameter[GainAutomation] = _vpot;
- _fader->set_control (pan_control);
- control_by_parameter[PanWidthAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanWidthAutomation] = 0;
- }
- } else {
- /* gain to fader, pan width to vpot */
- vpot_parameter = PanWidthAutomation;
- _fader->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _fader;
- _vpot->set_control (pan_control);
- control_by_parameter[PanWidthAutomation] = _vpot;
- }
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanWidthAutomation] = 0;
- }
+ pan_control = _stripable->pan_width_control ();
break;
-
case PanElevationAutomation:
break;
case PanFrontBackAutomation:
break;
case PanLFEAutomation:
break;
- case TrimAutomation:
- _trim_mode = TrimAutomation;
- vpot_parameter = TrimAutomation;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, trim to fader */
- _vpot->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- if (_route->trim() && route()->trim()->active()) {
- _fader->set_control (_route->trim_control());
- control_by_parameter[TrimAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[TrimAutomation] = 0;
- }
- } else {
- /* gain to fader, trim to vpot */
- _fader->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _fader;
- if (_route->trim() && route()->trim()->active()) {
- _vpot->set_control (_route->trim_control());
- control_by_parameter[TrimAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[TrimAutomation] = 0;
- }
- }
- break;
- case PhaseAutomation:
- _trim_mode = PhaseAutomation;
- vpot_parameter = PhaseAutomation;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, phase to fader */
- _vpot->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- if (_route->phase_invert().size()) {
- _fader->set_control (_route->phase_control());
- control_by_parameter[PhaseAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PhaseAutomation] = 0;
- }
- } else {
- /* gain to fader, phase to vpot */
- _fader->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _fader;
- if (_route->phase_invert().size()) {
- _vpot->set_control (_route->phase_control());
- control_by_parameter[PhaseAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PhaseAutomation] = 0;
- }
- }
- break;
default:
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("vpot mode %1 not known.\n", p));
- break;
+ return;
+ }
+ if (pan_control) {
+ _pan_mode = p;
+ _vpot->set_control (pan_control);
}
pending_display[1] = vpot_mode_string ();
bool
Strip::is_midi_track () const
{
- return boost::dynamic_pointer_cast<MidiTrack>(_route) != 0;
+ return boost::dynamic_pointer_cast<MidiTrack>(_stripable) != 0;
}
void
return;
}
- if (!_route || !_meter) {
+ if (!_stripable || !_meter) {
return;
}