#include <sys/time.h>
+#include <glibmm/convert.h>
+
#include "midi++/port.h"
#include "pbd/compose.h"
#include "ardour/session.h"
#include "ardour/send.h"
#include "ardour/track.h"
+#include "ardour/midi_track.h"
#include "ardour/user_bundle.h"
#include "mackie_control_protocol.h"
#include "jog.h"
#include "meter.h"
-using namespace Mackie;
using namespace std;
using namespace ARDOUR;
using namespace PBD;
+using namespace ArdourSurface;
+using namespace Mackie;
-#define ui_context() MackieControlProtocol::instance() /* a UICallback-derived object that specifies the event loop for signal handling */
-#define ui_bind(f, ...) boost::protect (boost::bind (f, __VA_ARGS__))
+#ifndef timeradd /// only avail with __USE_BSD
+#define timeradd(a,b,result) \
+ do { \
+ (result)->tv_sec = (a)->tv_sec + (b)->tv_sec; \
+ (result)->tv_usec = (a)->tv_usec + (b)->tv_usec; \
+ if ((result)->tv_usec >= 1000000) \
+ { \
+ ++(result)->tv_sec; \
+ (result)->tv_usec -= 1000000; \
+ } \
+ } while (0)
+#endif
-extern PBD::EventLoop::InvalidationRecord* __invalidator (sigc::trackable& trackable, const char*, int);
-#define invalidator() __invalidator (*(MackieControlProtocol::instance()), __FILE__, __LINE__)
+#define ui_context() MackieControlProtocol::instance() /* a UICallback-derived object that specifies the event loop for signal handling */
Strip::Strip (Surface& s, const std::string& name, int index, const map<Button::ID,StripButtonInfo>& strip_buttons)
: Group (name)
, _vselect (0)
, _fader_touch (0)
, _vpot (0)
- , _vpot_mode (PanAzimuth)
- , _preflip_vpot_mode (PanAzimuth)
, _fader (0)
+ , _meter (0)
, _index (index)
, _surface (&s)
, _controls_locked (false)
- , _reset_display_at (0)
+ , _transport_is_rolling (false)
+ , _metering_active (true)
+ , _block_vpot_mode_redisplay_until (0)
+ , _block_screen_redisplay_until (0)
+ , _pan_mode (PanAzimuthAutomation)
+ , _trim_mode (TrimAutomation)
, _last_gain_position_written (-1.0)
- , _last_pan_position_written (-1.0)
+ , _last_pan_azi_position_written (-1.0)
+ , _last_pan_width_position_written (-1.0)
+ , _last_trim_position_written (-1.0)
+ , redisplay_requests (256)
{
_fader = dynamic_cast<Fader*> (Fader::factory (*_surface, index, "fader", *this));
_vpot = dynamic_cast<Pot*> (Pot::factory (*_surface, Pot::ID + index, "vpot", *this));
- _meter = dynamic_cast<Meter*> (Meter::factory (*_surface, index, "meter", *this));
+
+ if (s.mcp().device_info().has_meters()) {
+ _meter = dynamic_cast<Meter*> (Meter::factory (*_surface, index, "meter", *this));
+ }
for (map<Button::ID,StripButtonInfo>::const_iterator b = strip_buttons.begin(); b != strip_buttons.end(); ++b) {
Button* bb = dynamic_cast<Button*> (Button::factory (*_surface, b->first, b->second.base_id + index, b->second.name, *this));
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("surface %1 strip %2 new button BID %3 id %4 from base %5\n",
- _surface->number(), index, Button::id_to_name (bb->bid()),
+ _surface->number(), index, Button::id_to_name (bb->bid()),
bb->id(), b->second.base_id));
}
-}
+}
Strip::~Strip ()
{
/* surface is responsible for deleting all controls */
}
-void
+void
Strip::add (Control & control)
{
Button* button;
break;
case Button::FaderTouch:
_fader_touch = button;
+ break;
default:
break;
}
}
void
-Strip::set_route (boost::shared_ptr<Route> r)
+Strip::set_route (boost::shared_ptr<Route> r, bool /*with_messages*/)
{
if (_controls_locked) {
return;
}
route_connections.drop_connections ();
-
+
_solo->set_control (boost::shared_ptr<AutomationControl>());
_mute->set_control (boost::shared_ptr<AutomationControl>());
_select->set_control (boost::shared_ptr<AutomationControl>());
_route = r;
+ control_by_parameter.clear ();
+
+ control_by_parameter[PanAzimuthAutomation] = (Control*) 0;
+ control_by_parameter[PanWidthAutomation] = (Control*) 0;
+ control_by_parameter[PanElevationAutomation] = (Control*) 0;
+ control_by_parameter[PanFrontBackAutomation] = (Control*) 0;
+ control_by_parameter[PanLFEAutomation] = (Control*) 0;
+ control_by_parameter[GainAutomation] = (Control*) 0;
+ control_by_parameter[TrimAutomation] = (Control*) 0;
+ control_by_parameter[PhaseAutomation] = (Control*) 0;
+
+ reset_saved_values ();
+
if (!r) {
+ zero ();
return;
}
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Surface %1 strip %2 now mapping route %3\n",
_surface->number(), _index, _route->name()));
-
+
_solo->set_control (_route->solo_control());
_mute->set_control (_route->mute_control());
- set_vpot_mode (PanAzimuth);
-
- _route->solo_control()->Changed.connect(route_connections, invalidator(), ui_bind (&Strip::notify_solo_changed, this), ui_context());
- _route->mute_control()->Changed.connect(route_connections, invalidator(), ui_bind (&Strip::notify_mute_changed, this), ui_context());
+
+ _route->solo_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
+ _route->listen_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
+
+ _route->mute_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_mute_changed, this), ui_context());
+
+ if (_route->trim() && route()->trim()->active()) {
+ _route->trim_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trim_changed, this, false), ui_context());
+ }
+
+ if (_route->phase_invert().size()) {
+ _route->phase_invert_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_phase_changed, this, false), ui_context());
+ _route->phase_control()->set_channel(0);
+ }
boost::shared_ptr<Pannable> pannable = _route->pannable();
- if (pannable) {
- pannable->pan_azimuth_control->Changed.connect(route_connections, invalidator(), ui_bind (&Strip::notify_panner_changed, this, false), ui_context());
- pannable->pan_width_control->Changed.connect(route_connections, invalidator(), ui_bind (&Strip::notify_panner_changed, this, false), ui_context());
+ if (pannable && _route->panner()) {
+ pannable->pan_azimuth_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_azi_changed, this, false), ui_context());
+ pannable->pan_width_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_width_changed, this, false), ui_context());
}
- _route->gain_control()->Changed.connect(route_connections, invalidator(), ui_bind (&Strip::notify_gain_changed, this, false), ui_context());
- _route->PropertyChanged.connect (route_connections, invalidator(), ui_bind (&Strip::notify_property_changed, this, _1), ui_context());
-
+ _route->gain_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_gain_changed, this, false), ui_context());
+ _route->PropertyChanged.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_property_changed, this, _1), ui_context());
+
boost::shared_ptr<Track> trk = boost::dynamic_pointer_cast<ARDOUR::Track>(_route);
-
+
if (trk) {
_recenable->set_control (trk->rec_enable_control());
- trk->rec_enable_control()->Changed .connect(route_connections, invalidator(), ui_bind (&Strip::notify_record_enable_changed, this), ui_context());
+ trk->rec_enable_control()->Changed .connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_record_enable_changed, this), ui_context());
+
+
}
-
+
// TODO this works when a currently-banked route is made inactive, but not
// when a route is activated which should be currently banked.
-
- _route->active_changed.connect (route_connections, invalidator(), ui_bind (&Strip::notify_active_changed, this), ui_context());
- _route->DropReferences.connect (route_connections, invalidator(), ui_bind (&Strip::notify_route_deleted, this), ui_context());
-
- /* Update */
-
- notify_all ();
+
+ _route->active_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_active_changed, this), ui_context());
+ _route->DropReferences.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_route_deleted, this), ui_context());
/* setup legal VPot modes for this route */
-
- build_input_list (_route->input()->n_ports());
- build_output_list (_route->output()->n_ports());
- current_pot_modes.clear();
+ possible_pot_parameters.clear();
if (pannable) {
- boost::shared_ptr<Panner> panner = pannable->panner();
+ boost::shared_ptr<Panner> panner = _route->panner();
if (panner) {
set<Evoral::Parameter> automatable = panner->what_can_be_automated ();
set<Evoral::Parameter>::iterator a;
-
+
if ((a = automatable.find (PanAzimuthAutomation)) != automatable.end()) {
- current_pot_modes.push_back (PanAzimuth);
+ possible_pot_parameters.push_back (PanAzimuthAutomation);
}
-
+
if ((a = automatable.find (PanWidthAutomation)) != automatable.end()) {
- current_pot_modes.push_back (PanWidth);
+ possible_pot_parameters.push_back (PanWidthAutomation);
}
}
}
- current_pot_modes.push_back (Input);
- current_pot_modes.push_back (Output);
-
- if (_route->nth_send (0) != 0) {
- current_pot_modes.push_back (Send1);
+ if (_route->trim() && route()->trim()->active()) {
+ possible_pot_parameters.push_back (TrimAutomation);
}
- if (_route->nth_send (1) != 0) {
- current_pot_modes.push_back (Send2);
- }
- if (_route->nth_send (2) != 0) {
- current_pot_modes.push_back (Send3);
- }
- if (_route->nth_send (3) != 0) {
- current_pot_modes.push_back (Send4);
- }
- if (_route->nth_send (4) != 0) {
- current_pot_modes.push_back (Send5);
- }
- if (_route->nth_send (5) != 0) {
- current_pot_modes.push_back (Send6);
- }
- if (_route->nth_send (6) != 0) {
- current_pot_modes.push_back (Send7);
+
+ possible_trim_parameters.clear();
+
+ if (_route->trim() && route()->trim()->active()) {
+ possible_trim_parameters.push_back (TrimAutomation);
+ _trim_mode = TrimAutomation;
}
- if (_route->nth_send (7) != 0) {
- current_pot_modes.push_back (Send8);
+
+ if (_route->phase_invert().size()) {
+ possible_trim_parameters.push_back (PhaseAutomation);
+ if (_trim_mode != TrimAutomation) {
+ _trim_mode = PhaseAutomation;
+ }
}
+
+ /* Update */
+ _pan_mode = PanAzimuthAutomation;
+ potmode_changed (false);
+ notify_all ();
+
}
-void
+void
Strip::notify_all()
{
+ if (!_route) {
+ zero ();
+ return;
+ }
+
notify_solo_changed ();
notify_mute_changed ();
notify_gain_changed ();
notify_property_changed (PBD::PropertyChange (ARDOUR::Properties::name));
- notify_panner_changed ();
+ notify_panner_azi_changed ();
+ notify_panner_width_changed ();
notify_record_enable_changed ();
+ notify_trim_changed ();
+ notify_phase_changed ();
}
-void
+void
Strip::notify_solo_changed ()
{
if (_route && _solo) {
- _surface->write (_solo->set_state (_route->soloed() ? on : off));
+ _surface->write (_solo->set_state ((_route->soloed() || _route->listening_via_monitor()) ? on : off));
}
}
-void
+void
Strip::notify_mute_changed ()
{
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Strip %1 mute changed\n", _index));
}
}
-void
+void
Strip::notify_record_enable_changed ()
{
if (_route && _recenable) {
}
}
-void
+void
Strip::notify_active_changed ()
{
_surface->mcp().refresh_current_bank();
}
-void
+void
Strip::notify_route_deleted ()
{
_surface->mcp().refresh_current_bank();
}
-void
+void
Strip::notify_gain_changed (bool force_update)
{
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("gain changed for strip %1, flip mode %2\n", _index, _surface->mcp().flip_mode()));
-
if (_route) {
-
+
Control* control;
- if (_surface->mcp().flip_mode()) {
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
control = _vpot;
} else {
control = _fader;
}
- if (!control->in_use()) {
+ boost::shared_ptr<AutomationControl> ac = _route->gain_control();
- float pos = _route->gain_control()->get_value();
+ float gain_coefficient = ac->get_value();
+ float normalized_position = ac->internal_to_interface (gain_coefficient);
- if (force_update || pos != _last_gain_position_written) {
- if (_surface->mcp().flip_mode()) {
- _surface->write (_vpot->set_all (pos, true, Pot::wrap));
- do_parameter_display (GainAutomation, pos);
- } else {
- _surface->write (_fader->set_position (pos));
- do_parameter_display (GainAutomation, pos);
- }
+ if (force_update || normalized_position != _last_gain_position_written) {
- queue_display_reset (2000);
- _last_gain_position_written = pos;
-
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ if (!control->in_use()) {
+ _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
+ }
+ queue_parameter_display (GainAutomation, gain_coefficient);
} else {
- DEBUG_TRACE (DEBUG::MackieControl, "value is stale, no message sent\n");
+ if (!control->in_use()) {
+ _surface->write (_fader->set_position (normalized_position));
+ }
+ queue_parameter_display (GainAutomation, gain_coefficient);
}
- } else {
- DEBUG_TRACE (DEBUG::MackieControl, "fader in use, no message sent\n");
+
+ _last_gain_position_written = normalized_position;
+ }
+ }
+}
+
+void
+Strip::notify_trim_changed (bool force_update)
+{
+ if (_route) {
+
+ if (!_route->trim() || !route()->trim()->active()) {
+ _surface->write (_vpot->zero());
+ return;
+ }
+ Control* control = 0;
+ ControlParameterMap::iterator i = control_by_parameter.find (TrimAutomation);
+
+ if (i == control_by_parameter.end()) {
+ return;
+ }
+
+ control = i->second;
+
+ boost::shared_ptr<AutomationControl> ac = _route->trim_control();
+
+ float gain_coefficient = ac->get_value();
+ float normalized_position = ac->internal_to_interface (gain_coefficient);
+
+ if (force_update || normalized_position != _last_trim_position_written) {
+ if (control == _fader) {
+ if (!_fader->in_use()) {
+ _surface->write (_fader->set_position (normalized_position));
+ queue_parameter_display (TrimAutomation, gain_coefficient);
+ }
+ } else if (control == _vpot) {
+ _surface->write (_vpot->set (normalized_position, true, Pot::dot));
+ queue_parameter_display (TrimAutomation, gain_coefficient);
+ }
+ _last_trim_position_written = normalized_position;
+ }
+ }
+}
+
+void
+Strip::notify_phase_changed (bool force_update)
+{
+ if (_route) {
+ if (!_route->phase_invert().size()) {
+ _surface->write (_vpot->zero());
+ return;
+ }
+
+ Control* control = 0;
+ ControlParameterMap::iterator i = control_by_parameter.find (PhaseAutomation);
+
+ if (i == control_by_parameter.end()) {
+ return;
+ }
+
+ control = i->second;
+
+ float normalized_position = _route->phase_control()->get_value();
+
+ if (control == _fader) {
+ if (!_fader->in_use()) {
+ _surface->write (_fader->set_position (normalized_position));
+ queue_parameter_display (PhaseAutomation, normalized_position);
+ }
+ } else if (control == _vpot) {
+ _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
+ queue_parameter_display (PhaseAutomation, normalized_position);
}
- } else {
- DEBUG_TRACE (DEBUG::MackieControl, "no route or no fader\n");
}
}
-void
+void
Strip::notify_property_changed (const PropertyChange& what_changed)
{
if (!what_changed.contains (ARDOUR::Properties::name)) {
return;
}
- if (_route) {
- string line1;
- string fullname = _route->name();
-
- if (fullname.length() <= 6) {
- line1 = fullname;
- } else {
- line1 = PBD::short_version (fullname, 6);
- }
-
- _surface->write (display (0, line1));
+ show_route_name ();
+}
+
+void
+Strip::show_route_name ()
+{
+ if (!_route) {
+ return;
}
+ string line1;
+ string fullname = _route->name();
+
+ if (fullname.length() <= 6) {
+ line1 = fullname;
+ } else {
+ line1 = PBD::short_version (fullname, 6);
+ }
+
+ _surface->write (display (0, line1));
}
-void
-Strip::notify_panner_changed (bool force_update)
+void
+Strip::notify_panner_azi_changed (bool force_update)
{
if (_route) {
boost::shared_ptr<Pannable> pannable = _route->pannable();
- if (!pannable) {
+ if (!pannable || !_route->panner()) {
_surface->write (_vpot->zero());
return;
}
- Control* control;
+ Control* control = 0;
+ ControlParameterMap::iterator i = control_by_parameter.find (PanAzimuthAutomation);
- if (_surface->mcp().flip_mode()) {
- control = _fader;
- } else {
- control = _vpot;
+ if (i == control_by_parameter.end()) {
+ return;
}
- if (!control->in_use()) {
-
- double pos = pannable->pan_azimuth_control->internal_to_interface (pannable->pan_azimuth_control->get_value());
-
- if (force_update || pos != _last_pan_position_written) {
-
- if (_surface->mcp().flip_mode()) {
-
+ control = i->second;
+
+ double pos = pannable->pan_azimuth_control->internal_to_interface (pannable->pan_azimuth_control->get_value());
+
+ if (force_update || pos != _last_pan_azi_position_written) {
+
+ if (control == _fader) {
+ if (!_fader->in_use()) {
_surface->write (_fader->set_position (pos));
- do_parameter_display (PanAzimuthAutomation, pos);
- } else {
- _surface->write (_vpot->set_all (pos, true, Pot::dot));
- do_parameter_display (PanAzimuthAutomation, pos);
+ queue_parameter_display (PanAzimuthAutomation, pos);
+ }
+ } else if (control == _vpot) {
+ _surface->write (_vpot->set (pos, true, Pot::dot));
+ queue_parameter_display (PanAzimuthAutomation, pos);
+ }
+
+ _last_pan_azi_position_written = pos;
+ }
+ }
+}
+
+void
+Strip::notify_panner_width_changed (bool force_update)
+{
+ if (_route) {
+
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan width change for strip %1\n", _index));
+
+ boost::shared_ptr<Pannable> pannable = _route->pannable();
+
+ if (!pannable || !_route->panner()) {
+ _surface->write (_vpot->zero());
+ return;
+ }
+
+ Control* control = 0;
+ ControlParameterMap::iterator i = control_by_parameter.find (PanWidthAutomation);
+
+ if (i == control_by_parameter.end()) {
+ return;
+ }
+
+ control = i->second;
+
+ double pos = pannable->pan_width_control->internal_to_interface (pannable->pan_width_control->get_value());
+
+ if (force_update || pos != _last_pan_azi_position_written) {
+
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+
+ if (control == _fader) {
+ if (!control->in_use()) {
+ _surface->write (_fader->set_position (pos));
+ queue_parameter_display (PanWidthAutomation, pos);
+ }
}
- queue_display_reset (2000);
- _last_pan_position_written = pos;
+ } else if (control == _vpot) {
+ _surface->write (_vpot->set (pos, true, Pot::spread));
+ queue_parameter_display (PanWidthAutomation, pos);
}
+
+ _last_pan_azi_position_written = pos;
}
}
}
void
-Strip::select_event (Button& button, ButtonState bs)
+Strip::select_event (Button&, ButtonState bs)
{
DEBUG_TRACE (DEBUG::MackieControl, "select button\n");
-
+
if (bs == press) {
-
- int ms = _surface->mcp().modifier_state();
+
+ int ms = _surface->mcp().main_modifier_state();
if (ms & MackieControlProtocol::MODIFIER_CMDALT) {
_controls_locked = !_controls_locked;
_surface->write (display (1,_controls_locked ? "Locked" : "Unlock"));
- queue_display_reset (1000);
- return;
+ block_vpot_mode_display_for (1000);
+ return;
}
-
+
if (ms & MackieControlProtocol::MODIFIER_SHIFT) {
/* reset to default */
- boost::shared_ptr<AutomationControl> ac = _vpot->control ();
+ boost::shared_ptr<AutomationControl> ac = _fader->control ();
if (ac) {
ac->set_value (ac->normal());
}
return;
}
-
+
DEBUG_TRACE (DEBUG::MackieControl, "add select button on press\n");
- _surface->mcp().add_down_select_button (_surface->number(), _index);
+ _surface->mcp().add_down_select_button (_surface->number(), _index);
_surface->mcp().select_range ();
-
+
} else {
DEBUG_TRACE (DEBUG::MackieControl, "remove select button on release\n");
- _surface->mcp().remove_down_select_button (_surface->number(), _index);
+ _surface->mcp().remove_down_select_button (_surface->number(), _index);
}
}
void
-Strip::vselect_event (Button& button, ButtonState bs)
+Strip::vselect_event (Button&, ButtonState bs)
{
if (bs == press) {
+ int ms = _surface->mcp().main_modifier_state();
- int ms = _surface->mcp().modifier_state();
-
if (ms & MackieControlProtocol::MODIFIER_SHIFT) {
- boost::shared_ptr<AutomationControl> ac = button.control ();
+
+ boost::shared_ptr<AutomationControl> ac = _vpot->control ();
if (ac) {
-
+
/* reset to default/normal value */
ac->set_value (ac->normal());
}
} else {
+
DEBUG_TRACE (DEBUG::MackieControl, "switching to next pot mode\n");
next_pot_mode ();
}
}
void
-Strip::fader_touch_event (Button& button, ButtonState bs)
+Strip::fader_touch_event (Button&, ButtonState bs)
{
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("fader touch, press ? %1\n", (bs == press)));
-
- /* never use the modified control for fader stuff */
-
+
if (bs == press) {
-
- _fader->set_in_use (true);
- _fader->start_touch (_surface->mcp().transport_frame());
+
boost::shared_ptr<AutomationControl> ac = _fader->control ();
+
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
if (ac) {
- do_parameter_display ((AutomationType) ac->parameter().type(), ac->internal_to_interface (ac->get_value()));
- queue_display_reset (2000);
+ ac->set_value (ac->normal());
}
-
+ } else {
+
+ _fader->set_in_use (true);
+ _fader->start_touch (_surface->mcp().transport_frame());
+
+ if (ac) {
+ queue_parameter_display ((AutomationType) ac->parameter().type(), ac->get_value());
+ }
+ }
+
} else {
-
+
_fader->set_in_use (false);
_fader->stop_touch (_surface->mcp().transport_frame(), true);
-
+
}
-}
+}
void
}
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("strip %1 handling button %2 press ? %3\n", _index, button.bid(), (bs == press)));
-
+
switch (button.bid()) {
case Button::Select:
select_event (button, bs);
break;
-
+
case Button::VSelect:
vselect_event (button, bs);
break;
if (bs == press) {
DEBUG_TRACE (DEBUG::MackieControl, "add button on press\n");
_surface->mcp().add_down_button ((AutomationType) control->parameter().type(), _surface->number(), _index);
-
+
float new_value;
- int ms = _surface->mcp().modifier_state();
-
+ int ms = _surface->mcp().main_modifier_state();
+
if (ms & MackieControlProtocol::MODIFIER_SHIFT) {
/* reset to default/normal value */
new_value = control->normal();
} else {
new_value = control->get_value() ? 0.0 : 1.0;
}
-
+
/* get all controls that either have their
* button down or are within a range of
* several down buttons
*/
-
+
MackieControlProtocol::ControlList controls = _surface->mcp().down_controls ((AutomationType) control->parameter().type());
-
-
+
+
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("there are %1 buttons down for control type %2, new value = %3\n",
controls.size(), control->parameter().type(), new_value));
/* apply change */
-
+
for (MackieControlProtocol::ControlList::iterator c = controls.begin(); c != controls.end(); ++c) {
(*c)->set_value (new_value);
}
-
+
} else {
DEBUG_TRACE (DEBUG::MackieControl, "remove button on release\n");
_surface->mcp().remove_down_button ((AutomationType) control->parameter().type(), _surface->number(), _index);
}
}
+void
+Strip::queue_parameter_display (AutomationType type, float val)
+{
+ RedisplayRequest req;
+
+ req.type = type;
+ req.val = val;
+
+ redisplay_requests.write (&req, 1);
+}
+
void
Strip::do_parameter_display (AutomationType type, float val)
{
- float dB;
+ bool screen_hold = false;
switch (type) {
case GainAutomation:
- std::cerr << "Updating displayed gain level from " << val;
- dB = fast_coefficient_to_dB (val);
- std::cerr << " dB = " << dB << std::endl;
if (val == 0.0) {
_surface->write (display (1, " -inf "));
} else {
char buf[16];
-
+ float dB = accurate_coefficient_to_dB (val);
snprintf (buf, sizeof (buf), "%6.1f", dB);
_surface->write (display (1, buf));
- }
+ screen_hold = true;
+ }
break;
case PanAzimuthAutomation:
if (_route) {
boost::shared_ptr<Pannable> p = _route->pannable();
- if (p && p->panner()) {
- string str = p->panner()->value_as_string (p->pan_azimuth_control);
+ if (p && _route->panner()) {
+ string str =_route->panner()->value_as_string (p->pan_azimuth_control);
_surface->write (display (1, str));
+ screen_hold = true;
}
}
+ break;
+
+ case PanWidthAutomation:
+ if (_route) {
+ char buf[16];
+ snprintf (buf, sizeof (buf), "%5ld%%", lrintf ((val * 200.0)-100));
+ _surface->write (display (1, buf));
+ screen_hold = true;
+ }
+ break;
+
+ case TrimAutomation:
+ if (_route) {
+ char buf[16];
+ float dB = accurate_coefficient_to_dB (val);
+ snprintf (buf, sizeof (buf), "%6.1f", dB);
+ _surface->write (display (1, buf));
+ screen_hold = true;
+ }
+ break;
+
+ case PhaseAutomation:
+ if (_route) {
+ if (_route->phase_control()->get_value() < 0.5) {
+ _surface->write (display (1, "Normal"));
+ } else {
+ _surface->write (display (1, "Invert"));
+ }
+ screen_hold = true;
+ }
+ break;
+
default:
break;
}
+
+ if (screen_hold) {
+ block_vpot_mode_display_for (1000);
+ }
+}
+
+void
+Strip::handle_fader_touch (Fader& fader, bool touch_on)
+{
+ if (touch_on) {
+ fader.start_touch (_surface->mcp().transport_frame());
+ } else {
+ fader.stop_touch (_surface->mcp().transport_frame(), false);
+ }
}
void
Strip::handle_fader (Fader& fader, float position)
{
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("fader to %1\n", position));
+ boost::shared_ptr<AutomationControl> ac = fader.control();
+ if (!ac) {
+ return;
+ }
fader.set_value (position);
- fader.start_touch (_surface->mcp().transport_frame());
- queue_display_reset (2000);
- // must echo bytes back to slider now, because
- // the notifier only works if the fader is not being
- // touched. Which it is if we're getting input.
+ /* From the Mackie Control MIDI implementation docs:
+
+ In order to ensure absolute synchronization with the host software,
+ Mackie Control uses a closed-loop servo system for the faders,
+ meaning the faders will always move to their last received position.
+ When a host receives a Fader Position Message, it must then
+ re-transmit that message to the Mackie Control or else the faders
+ will return to their last position.
+ */
_surface->write (fader.set_position (position));
}
/* Pots only emit events when they move, not when they
stop moving. So to get a stop event, we need to use a timeout.
*/
-
- pot.start_touch (_surface->mcp().transport_frame());
+ boost::shared_ptr<AutomationControl> ac = pot.control();
+ if (!ac) {
+ return;
+ }
double p = pot.get_value ();
p += delta;
- p = min (1.0, p);
- p = max (0.0, p);
+ p = max (ac->lower(), p);
+ p = min (ac->upper(), p);
pot.set_value (p);
}
void
-Strip::periodic (uint64_t usecs)
+Strip::periodic (ARDOUR::microseconds_t now)
{
+ bool reshow_vpot_mode = false;
+ bool reshow_name = false;
+
if (!_route) {
return;
}
- update_automation ();
+ if (_block_screen_redisplay_until >= now) {
+ if (_surface->mcp().device_info().has_separate_meters()) {
+ goto meters;
+ }
+ /* no drawing here, for now */
+ return;
+
+ } else if (_block_screen_redisplay_until) {
+
+ /* timeout reached, reset */
+
+ _block_screen_redisplay_until = 0;
+ reshow_vpot_mode = true;
+ reshow_name = true;
+ }
+
+ if (_block_vpot_mode_redisplay_until >= now) {
+ return;
+ } else if (_block_vpot_mode_redisplay_until) {
+
+ /* timeout reached, reset */
+
+ _block_vpot_mode_redisplay_until = 0;
+ reshow_vpot_mode = true;
+ }
+
+ if (reshow_name) {
+ show_route_name ();
+ }
+
+ if (reshow_vpot_mode) {
+ return_to_vpot_mode_display ();
+ } else {
+ /* no point doing this if we just switched back to vpot mode
+ display */
+ update_automation ();
+ }
+
+ meters:
update_meter ();
+}
+
+void
+Strip::redisplay (ARDOUR::microseconds_t now)
+{
+ RedisplayRequest req;
+ bool have_request = false;
+
+ while (redisplay_requests.read (&req, 1) == 1) {
+ /* read them all */
+ have_request = true;
+ }
- if (_reset_display_at && _reset_display_at < usecs) {
- reset_display ();
+ if (_block_screen_redisplay_until >= now) {
+ return;
+ }
+
+ if (have_request) {
+ do_parameter_display (req.type, req.val);
}
}
-void
+void
Strip::update_automation ()
{
ARDOUR::AutoState gain_state = _route->gain_control()->automation_state();
if (_route->panner()) {
ARDOUR::AutoState panner_state = _route->panner()->automation_state();
if (panner_state == Touch || panner_state == Play) {
- notify_panner_changed (false);
+ notify_panner_azi_changed (false);
+ notify_panner_width_changed (false);
+ }
+ }
+ if (_route->trim() && route()->trim()->active()) {
+ ARDOUR::AutoState trim_state = _route->trim_control()->automation_state();
+ if (trim_state == Touch || trim_state == Play) {
+ notify_trim_changed (false);
}
}
}
void
Strip::update_meter ()
{
- if (_meter) {
- float dB = const_cast<PeakMeter&> (_route->peak_meter()).peak_power (0);
- _surface->write (_meter->update_message (dB));
+ if (_meter && _transport_is_rolling && _metering_active) {
+ float dB = const_cast<PeakMeter&> (_route->peak_meter()).meter_level (0, MeterMCP);
+ _meter->send_update (*_surface, dB);
}
}
-MidiByteArray
+void
Strip::zero ()
{
- MidiByteArray retval;
-
for (Group::Controls::const_iterator it = _controls.begin(); it != _controls.end(); ++it) {
- retval << (*it)->zero ();
+ _surface->write ((*it)->zero ());
}
- retval << blank_display (0);
- retval << blank_display (1);
-
- return retval;
+ _surface->write (blank_display (0));
+ _surface->write (blank_display (1));
}
MidiByteArray
// sysex header
retval << _surface->sysex_hdr();
-
+
// code for display
retval << 0x12;
// offset (0 to 0x37 first line, 0x38 to 0x6f for second line)
retval << (_index * 7 + (line_number * 0x38));
-
- // ascii data to display
- retval << line;
+
+ // ascii data to display. @param line is UTF-8
+ string ascii = Glib::convert_with_fallback (line, "UTF-8", "ISO-8859-1", "_");
+ string::size_type len = ascii.length();
+ if (len > 6) {
+ ascii = ascii.substr (0, 6);
+ len = 6;
+ }
+ retval << ascii;
// pad with " " out to 6 chars
- for (int i = line.length(); i < 6; ++i) {
+ for (int i = len; i < 6; ++i) {
retval << ' ';
}
-
+
// column spacer, unless it's the right-hand column
if (_index < 7) {
retval << ' ';
// sysex trailer
retval << MIDI::eox;
-
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("MackieMidiBuilder::strip_display midi: %1\n", retval));
return retval;
}
_controls_locked = false;
}
-MidiByteArray
-Strip::gui_selection_changed (ARDOUR::RouteNotificationListPtr rl)
+void
+Strip::gui_selection_changed (const ARDOUR::StrongRouteNotificationList& rl)
{
- for (ARDOUR::RouteNotificationList::iterator i = rl->begin(); i != rl->end(); ++i) {
+ for (ARDOUR::StrongRouteNotificationList::const_iterator i = rl.begin(); i != rl.end(); ++i) {
if ((*i) == _route) {
- return _select->set_state (on);
+ _surface->write (_select->set_state (on));
+ return;
}
}
- return _select->set_state (off);
+ _surface->write (_select->set_state (off));
}
string
Strip::vpot_mode_string () const
{
- switch (_vpot_mode) {
- case Gain:
+ boost::shared_ptr<AutomationControl> ac = _vpot->control();
+
+ if (!ac) {
+ return string();
+ }
+
+ switch (ac->parameter().type()) {
+ case GainAutomation:
return "Fader";
- case PanAzimuth:
+ case TrimAutomation:
+ return "Trim";
+ case PhaseAutomation:
+ return string_compose ("Phase%1", _route->phase_control()->channel() + 1);
+ case PanAzimuthAutomation:
return "Pan";
- case PanWidth:
+ case PanWidthAutomation:
return "Width";
- case PanElevation:
+ case PanElevationAutomation:
return "Elev";
- case PanFrontBack:
+ case PanFrontBackAutomation:
return "F/Rear";
- case PanLFE:
+ case PanLFEAutomation:
return "LFE";
- case Input:
- return "Input";
- case Output:
- return "Output";
- case Send1:
- return "Send 1";
- case Send2:
- return "Send 2";
- case Send3:
- return "Send 3";
- case Send4:
- return "Send 4";
- case Send5:
- return "Send 5";
- case Send6:
- return "Send 6";
- case Send7:
- return "Send 7";
- case Send8:
- return "Send 8";
}
return "???";
}
-void
-Strip::flip_mode_changed (bool notify)
+ void
+Strip::potmode_changed (bool notify)
{
if (!_route) {
return;
}
- boost::shared_ptr<AutomationControl> fader_controllable = _fader->control ();
- boost::shared_ptr<AutomationControl> vpot_controllable = _vpot->control ();
-
- _fader->set_control (vpot_controllable);
- _vpot->set_control (fader_controllable);
-
- _surface->write (display (1, vpot_mode_string ()));
+ // WIP
+ int pm = _surface->mcp().pot_mode();
+ switch (pm) {
+ case MackieControlProtocol::Pan:
+ // This needs to set current pan mode (azimuth or width... or whatever)
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Assign pot to Pan mode %1\n", enum_2_string (_pan_mode)));
+ set_vpot_parameter (_pan_mode);
+ break;
+ case MackieControlProtocol::Trim:
+ DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Trim mode.\n");
+ set_vpot_parameter (_trim_mode);
+ break;
+ case MackieControlProtocol::Send:
+ DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Send mode.\n");
+ set_vpot_parameter (SendAutomation);
+ break;
+ }
if (notify) {
notify_all ();
}
void
-Strip::queue_display_reset (uint32_t msecs)
+Strip::block_screen_display_for (uint32_t msecs)
{
- struct timeval now;
- struct timeval delta;
- struct timeval when;
- gettimeofday (&now, 0);
-
- delta.tv_sec = msecs/1000;
- delta.tv_usec = (msecs - ((msecs/1000) * 1000)) * 1000;
-
- timeradd (&now, &delta, &when);
-
- _reset_display_at = (when.tv_sec * 1000000) + when.tv_usec;
+ _block_screen_redisplay_until = ARDOUR::get_microseconds() + (msecs * 1000);
}
void
-Strip::clear_display_reset ()
+Strip::block_vpot_mode_display_for (uint32_t msecs)
{
- _reset_display_at = 0;
+ _block_vpot_mode_redisplay_until = ARDOUR::get_microseconds() + (msecs * 1000);
}
void
-Strip::reset_display ()
+Strip::return_to_vpot_mode_display ()
{
- _surface->write (display (1, vpot_mode_string()));
- clear_display_reset ();
-}
-
-struct RouteCompareByName {
- bool operator() (boost::shared_ptr<Route> a, boost::shared_ptr<Route> b) {
- return a->name().compare (b->name()) < 0;
- }
-};
+ /* returns the second line of the two-line per-strip display
+ back the mode where it shows what the VPot controls.
+ */
-void
-Strip::maybe_add_to_bundle_map (BundleMap& bm, boost::shared_ptr<Bundle> b, bool for_input, const ChanCount& channels)
-{
- if (b->ports_are_outputs() == !for_input || b->nchannels() != channels) {
- return;
+ if (_route) {
+ _surface->write (display (1, vpot_mode_string()));
+ } else {
+ _surface->write (blank_display (1));
}
-
- bm[b->name()] = b;
}
void
-Strip::build_input_list (const ChanCount& channels)
+Strip::next_pot_mode ()
{
- boost::shared_ptr<ARDOUR::BundleList> b = _surface->mcp().get_session().bundles ();
-
- input_bundles.clear ();
+ vector<Evoral::Parameter>::iterator i;
- /* give user bundles first chance at being in the menu */
-
- for (ARDOUR::BundleList::iterator i = b->begin(); i != b->end(); ++i) {
- if (boost::dynamic_pointer_cast<UserBundle> (*i)) {
- maybe_add_to_bundle_map (input_bundles, *i, true, channels);
- }
- }
-
- for (ARDOUR::BundleList::iterator i = b->begin(); i != b->end(); ++i) {
- if (boost::dynamic_pointer_cast<UserBundle> (*i) == 0) {
- maybe_add_to_bundle_map (input_bundles, *i, true, channels);
- }
- }
-
- boost::shared_ptr<ARDOUR::RouteList> routes = _surface->mcp().get_session().get_routes ();
- RouteList copy = *routes;
- copy.sort (RouteCompareByName ());
-
- for (ARDOUR::RouteList::const_iterator i = copy.begin(); i != copy.end(); ++i) {
- maybe_add_to_bundle_map (input_bundles, (*i)->output()->bundle(), true, channels);
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ /* do not change vpot mode while in flipped mode */
+ DEBUG_TRACE (DEBUG::MackieControl, "not stepping pot mode - in flip mode\n");
+ _surface->write (display (1, "Flip"));
+ block_vpot_mode_display_for (1000);
+ return;
}
-}
-
-void
-Strip::build_output_list (const ChanCount& channels)
-{
- boost::shared_ptr<ARDOUR::BundleList> b = _surface->mcp().get_session().bundles ();
- output_bundles.clear ();
+ boost::shared_ptr<AutomationControl> ac = _vpot->control();
- /* give user bundles first chance at being in the menu */
-
- for (ARDOUR::BundleList::iterator i = b->begin(); i != b->end(); ++i) {
- if (boost::dynamic_pointer_cast<UserBundle> (*i)) {
- maybe_add_to_bundle_map (output_bundles, *i, false, channels);
- }
+ if (!ac) {
+ return;
}
-
- for (ARDOUR::BundleList::iterator i = b->begin(); i != b->end(); ++i) {
- if (boost::dynamic_pointer_cast<UserBundle> (*i) == 0) {
- maybe_add_to_bundle_map (output_bundles, *i, false, channels);
+ if (_surface->mcp().pot_mode() == MackieControlProtocol::Pan) {
+ if (possible_pot_parameters.empty() || (possible_pot_parameters.size() == 1 && possible_pot_parameters.front() == ac->parameter())) {
+ return;
}
- }
-
- boost::shared_ptr<ARDOUR::RouteList> routes = _surface->mcp().get_session().get_routes ();
- RouteList copy = *routes;
- copy.sort (RouteCompareByName ());
- for (ARDOUR::RouteList::const_iterator i = copy.begin(); i != copy.end(); ++i) {
- maybe_add_to_bundle_map (output_bundles, (*i)->input()->bundle(), false, channels);
- }
-}
+ for (i = possible_pot_parameters.begin(); i != possible_pot_parameters.end(); ++i) {
+ if ((*i) == ac->parameter()) {
+ break;
+ }
+ }
-void
-Strip::next_pot_mode ()
-{
- vector<PotMode>::iterator i;
+ /* move to the next mode in the list, or back to the start (which will
+ also happen if the current mode is not in the current pot mode list)
+ */
- if (_surface->mcp().flip_mode()) {
- /* do not change vpot mode while in flipped mode */
- DEBUG_TRACE (DEBUG::MackieControl, "not stepping pot mode - in flip mode\n");
- _surface->write (display (1, "Flip"));
- queue_display_reset (2000);
- return;
- }
+ if (i != possible_pot_parameters.end()) {
+ ++i;
+ }
- for (i = current_pot_modes.begin(); i != current_pot_modes.end(); ++i) {
- if ((*i) == _vpot_mode) {
- break;
+ if (i == possible_pot_parameters.end()) {
+ i = possible_pot_parameters.begin();
+ }
+ set_vpot_parameter (*i);
+ } else if (_surface->mcp().pot_mode() == MackieControlProtocol::Trim) {
+ if (possible_trim_parameters.empty() || (possible_trim_parameters.size() == 1 && possible_trim_parameters.front() == ac->parameter())) {
+ return;
}
- }
- /* move to the next mode in the list, or back to the start (which will
- also happen if the current mode is not in the current pot mode list)
- */
+ for (i = possible_trim_parameters.begin(); i != possible_trim_parameters.end(); ++i) {
+ if ((*i) == ac->parameter()) {
+ break;
+ }
+ }
+ if ((*i).type() == PhaseAutomation && _route->phase_invert().size() > 1) {
+ // There are more than one channel of phase
+ if ((_route->phase_control()->channel() + 1) < _route->phase_invert().size()) {
+ _route->phase_control()->set_channel(_route->phase_control()->channel() + 1);
+ set_vpot_parameter (*i);
+ return;
+ } else {
+ _route->phase_control()->set_channel(0);
+ }
+ }
+ /* move to the next mode in the list, or back to the start (which will
+ also happen if the current mode is not in the current pot mode list)
+ */
- if (i != current_pot_modes.end()) {
- ++i;
- }
+ if (i != possible_trim_parameters.end()) {
+ ++i;
+ }
- if (i == current_pot_modes.end()) {
- i = current_pot_modes.begin();
+ if (i == possible_trim_parameters.end()) {
+ i = possible_trim_parameters.begin();
+ }
+ set_vpot_parameter (*i);
}
- set_vpot_mode (*i);
}
void
-Strip::set_vpot_mode (PotMode m)
+Strip::set_vpot_parameter (Evoral::Parameter p)
{
- boost::shared_ptr<Send> send;
boost::shared_ptr<Pannable> pannable;
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("switch to vpot mode %1\n", m));
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("switch to vpot mode %1\n", p.type()));
- if (!_route) {
- return;
- }
+ reset_saved_values ();
- _vpot_mode = m;
+ /* unset any mapping between the vpot and any existing parameters */
- switch (_vpot_mode) {
- case Gain:
- break;
- case PanAzimuth:
+ for (ControlParameterMap::iterator i = control_by_parameter.begin(); i != control_by_parameter.end(); ++i) {
+
+ if (i != control_by_parameter.end() && i->second == _vpot) {
+ i->second = 0;
+ }
+ }
+
+ switch (p.type()) {
+ case PanAzimuthAutomation:
+ _pan_mode = PanAzimuthAutomation;
pannable = _route->pannable ();
- if (pannable) {
- if (_surface->mcp().flip_mode()) {
- /* gain to vpot, pan azi to fader */
- _vpot->set_control (_route->gain_control());
- if (pannable) {
- _fader->set_control (pannable->pan_azimuth_control);
- }
- _vpot_mode = Gain;
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ /* gain to vpot, pan azi to fader */
+ _vpot->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _vpot;
+ if (pannable) {
+ _fader->set_control (pannable->pan_azimuth_control);
+ control_by_parameter[PanAzimuthAutomation] = _fader;
} else {
- /* gain to fader, pan azi to vpot */
- _fader->set_control (_route->gain_control());
- if (pannable) {
- _vpot->set_control (pannable->pan_azimuth_control);
- }
+ _fader->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[PanAzimuthAutomation] = 0;
+ }
+ } else {
+ /* gain to fader, pan azi to vpot */
+ _fader->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _fader;
+ if (pannable) {
+ _vpot->set_control (pannable->pan_azimuth_control);
+ control_by_parameter[PanAzimuthAutomation] = _vpot;
+ } else {
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[PanAzimuthAutomation] = 0;
}
}
break;
- case PanWidth:
+ case PanWidthAutomation:
+ _pan_mode = PanWidthAutomation;
pannable = _route->pannable ();
- if (pannable) {
- if (_surface->mcp().flip_mode()) {
- /* gain to vpot, pan width to fader */
- _vpot->set_control (_route->gain_control());
- if (pannable) {
- _fader->set_control (pannable->pan_width_control);
- }
- _vpot_mode = Gain;
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ /* gain to vpot, pan width to fader */
+ _vpot->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _vpot;
+ if (pannable) {
+ _fader->set_control (pannable->pan_width_control);
+ control_by_parameter[PanWidthAutomation] = _fader;
} else {
- /* gain to fader, pan width to vpot */
- _fader->set_control (_route->gain_control());
- if (pannable) {
- _vpot->set_control (pannable->pan_width_control);
- }
+ _fader->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[PanWidthAutomation] = 0;
+ }
+ } else {
+ /* gain to fader, pan width to vpot */
+ _fader->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _fader;
+ if (pannable) {
+ _vpot->set_control (pannable->pan_width_control);
+ control_by_parameter[PanWidthAutomation] = _vpot;
+ } else {
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[PanWidthAutomation] = 0;
}
}
break;
- case PanElevation:
- break;
- case PanFrontBack:
+ case PanElevationAutomation:
break;
- case PanLFE:
+ case PanFrontBackAutomation:
break;
- case Input:
+ case PanLFEAutomation:
break;
- case Output:
- break;
- case Send1:
- send = boost::dynamic_pointer_cast<Send> (_route->nth_send (0));
- if (send) {
- if (_surface->mcp().flip_mode()) {
- /* route gain to vpot, send gain to fader */
- _fader->set_control (send->amp()->gain_control());
- _vpot->set_control (_route->gain_control());
- _vpot_mode = Gain;
- } else {
- /* route gain to fader, send gain to vpot */
- _vpot->set_control (send->amp()->gain_control());
- _fader->set_control (_route->gain_control());
+ case TrimAutomation:
+ _trim_mode = TrimAutomation;
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ /* gain to vpot, trim to fader */
+ _vpot->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _vpot;
+ if (_route->trim() && route()->trim()->active()) {
+ _fader->set_control (_route->trim_control());
+ control_by_parameter[TrimAutomation] = _fader;
+ } else {
+ _fader->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[TrimAutomation] = 0;
+ }
+ } else {
+ /* gain to fader, trim to vpot */
+ _fader->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _fader;
+ if (_route->trim() && route()->trim()->active()) {
+ _vpot->set_control (_route->trim_control());
+ control_by_parameter[TrimAutomation] = _vpot;
+ } else {
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[TrimAutomation] = 0;
}
}
break;
- case Send2:
- break;
- case Send3:
- break;
- case Send4:
- break;
- case Send5:
- break;
- case Send6:
+ case PhaseAutomation:
+ _trim_mode = PhaseAutomation;
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ /* gain to vpot, phase to fader */
+ _vpot->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _vpot;
+ if (_route->phase_invert().size()) {
+ _fader->set_control (_route->phase_control());
+ control_by_parameter[PhaseAutomation] = _fader;
+ } else {
+ _fader->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[PhaseAutomation] = 0;
+ }
+ } else {
+ /* gain to fader, phase to vpot */
+ _fader->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _fader;
+ if (_route->phase_invert().size()) {
+ _vpot->set_control (_route->phase_control());
+ control_by_parameter[PhaseAutomation] = _vpot;
+ } else {
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[PhaseAutomation] = 0;
+ }
+ }
break;
- case Send7:
+ case SendAutomation:
+ // deal with sends ... needs sends yet :)
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ // gain to vpot, trim to fader
+ _vpot->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _vpot;
+ _fader->set_control (boost::shared_ptr<AutomationControl>());
+ } else {
+ // gain to fader, trim to vpot
+ _fader->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _fader;
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ }
break;
- case Send8:
+ default:
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("vpot mode %1 not known.\n", p));
break;
- };
+
+ }
_surface->write (display (1, vpot_mode_string()));
}
+
+bool
+Strip::is_midi_track () const
+{
+ return boost::dynamic_pointer_cast<MidiTrack>(_route) != 0;
+}
+
+void
+Strip::reset_saved_values ()
+{
+ _last_pan_azi_position_written = -1.0;
+ _last_pan_width_position_written = -1.0;
+ _last_gain_position_written = -1.0;
+ _last_trim_position_written = -1.0;
+
+}
+
+void
+Strip::notify_metering_state_changed()
+{
+ if (!_route || !_meter) {
+ return;
+ }
+
+ bool transport_is_rolling = (_surface->mcp().get_transport_speed () != 0.0f);
+ bool metering_active = _surface->mcp().metering_active ();
+
+ if ((_transport_is_rolling == transport_is_rolling) && (_metering_active == metering_active)) {
+ return;
+ }
+
+ _meter->notify_metering_state_changed (*_surface, transport_is_rolling, metering_active);
+
+ if (!transport_is_rolling || !metering_active) {
+ notify_property_changed (PBD::PropertyChange (ARDOUR::Properties::name));
+ notify_panner_azi_changed (true);
+ }
+
+ _transport_is_rolling = transport_is_rolling;
+ _metering_active = metering_active;
+}
projects / ardour.git / blobdiff