*/
#include <sstream>
+#include <vector>
+
#include <stdint.h>
-#include "strip.h"
#include <sys/time.h>
#include "ardour/debug.h"
#include "ardour/midi_ui.h"
#include "ardour/meter.h"
+#include "ardour/plugin_insert.h"
#include "ardour/pannable.h"
#include "ardour/panner.h"
#include "ardour/panner_shell.h"
#include "ardour/session.h"
#include "ardour/send.h"
#include "ardour/track.h"
+#include "ardour/midi_track.h"
#include "ardour/user_bundle.h"
+#include "ardour/profile.h"
#include "mackie_control_protocol.h"
#include "surface_port.h"
#include "surface.h"
+#include "strip.h"
#include "button.h"
#include "led.h"
#include "pot.h"
, _controls_locked (false)
, _transport_is_rolling (false)
, _metering_active (true)
- , _reset_display_at (0)
+ , _block_vpot_mode_redisplay_until (0)
+ , _block_screen_redisplay_until (0)
+ , eq_band (-1)
, _pan_mode (PanAzimuthAutomation)
+ , _trim_mode (TrimAutomation)
+ , vpot_parameter (PanAzimuthAutomation)
, _last_gain_position_written (-1.0)
, _last_pan_azi_position_written (-1.0)
, _last_pan_width_position_written (-1.0)
, _last_trim_position_written (-1.0)
+ , _current_send (0)
, redisplay_requests (256)
{
_fader = dynamic_cast<Fader*> (Fader::factory (*_surface, index, "fader", *this));
return;
}
+ mb_pan_controllable.reset();
+
route_connections.drop_connections ();
_solo->set_control (boost::shared_ptr<AutomationControl>());
_route = r;
control_by_parameter.clear ();
+
+ control_by_parameter[PanAzimuthAutomation] = (Control*) 0;
+ control_by_parameter[PanWidthAutomation] = (Control*) 0;
+ control_by_parameter[PanElevationAutomation] = (Control*) 0;
+ control_by_parameter[PanFrontBackAutomation] = (Control*) 0;
+ control_by_parameter[PanLFEAutomation] = (Control*) 0;
+ control_by_parameter[GainAutomation] = (Control*) 0;
+ control_by_parameter[TrimAutomation] = (Control*) 0;
+ control_by_parameter[PhaseAutomation] = (Control*) 0;
+ control_by_parameter[SendAutomation] = (Control*) 0;
+
reset_saved_values ();
if (!r) {
_solo->set_control (_route->solo_control());
_mute->set_control (_route->mute_control());
- _pan_mode = PanAzimuthAutomation;
- potmode_changed (true);
-
-
_route->solo_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
_route->listen_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
_route->mute_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_mute_changed, this), ui_context());
- if (_route->trim()) {
+ if (_route->trim() && route()->trim()->active()) {
_route->trim_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trim_changed, this, false), ui_context());
}
- boost::shared_ptr<Pannable> pannable = _route->pannable();
+ if (_route->phase_invert().size()) {
+ _route->phase_invert_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_phase_changed, this, false), ui_context());
+ _route->phase_control()->set_channel(0);
+ }
+
+ boost::shared_ptr<AutomationControl> pan_control = _route->pan_azimuth_control();
+ if (pan_control) {
+ pan_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_azi_changed, this, false), ui_context());
+ }
- if (pannable && _route->panner()) {
- pannable->pan_azimuth_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_azi_changed, this, false), ui_context());
- pannable->pan_width_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_width_changed, this, false), ui_context());
+ pan_control = _route->pan_width_control();
+ if (pan_control) {
+ pan_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_width_changed, this, false), ui_context());
}
+
_route->gain_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_gain_changed, this, false), ui_context());
_route->PropertyChanged.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_property_changed, this, _1), ui_context());
if (trk) {
_recenable->set_control (trk->rec_enable_control());
trk->rec_enable_control()->Changed .connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_record_enable_changed, this), ui_context());
-
-
}
// TODO this works when a currently-banked route is made inactive, but not
_route->active_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_active_changed, this), ui_context());
_route->DropReferences.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_route_deleted, this), ui_context());
- /* Update */
-
- notify_all ();
-
/* setup legal VPot modes for this route */
- build_input_list (_route->input()->n_ports());
- build_output_list (_route->output()->n_ports());
-
possible_pot_parameters.clear();
- if (pannable) {
- boost::shared_ptr<Panner> panner = _route->panner();
- if (panner) {
- set<Evoral::Parameter> automatable = panner->what_can_be_automated ();
- set<Evoral::Parameter>::iterator a;
+ if (_route->pan_azimuth_control()) {
+ possible_pot_parameters.push_back (PanAzimuthAutomation);
+ }
+ if (_route->pan_width_control()) {
+ possible_pot_parameters.push_back (PanWidthAutomation);
+ }
+ if (_route->pan_elevation_control()) {
+ possible_pot_parameters.push_back (PanElevationAutomation);
+ }
+ if (_route->pan_frontback_control()) {
+ possible_pot_parameters.push_back (PanFrontBackAutomation);
+ }
+ if (_route->pan_lfe_control()) {
+ possible_pot_parameters.push_back (PanLFEAutomation);
+ }
+
+ if (_route->trim() && route()->trim()->active()) {
+ possible_pot_parameters.push_back (TrimAutomation);
+ }
- if ((a = automatable.find (PanAzimuthAutomation)) != automatable.end()) {
- possible_pot_parameters.push_back (PanAzimuthAutomation);
- }
+ possible_trim_parameters.clear();
- if ((a = automatable.find (PanWidthAutomation)) != automatable.end()) {
- possible_pot_parameters.push_back (PanWidthAutomation);
- }
+ if (_route->trim() && route()->trim()->active()) {
+ possible_trim_parameters.push_back (TrimAutomation);
+ _trim_mode = TrimAutomation;
+ }
+
+ if (_route->phase_invert().size()) {
+ possible_trim_parameters.push_back (PhaseAutomation);
+ _route->phase_control()->set_channel(0);
+ if (_trim_mode != TrimAutomation) {
+ _trim_mode = PhaseAutomation;
}
}
+ _current_send = 0;
+ /* Update */
+ _pan_mode = PanAzimuthAutomation;
+ potmode_changed (false);
+ notify_all ();
+
}
void
zero ();
return;
}
+ // The active V-pot control may not be active for this strip
+ // But if we zero it in the controls function it may erase
+ // the one we do want
+ _surface->write (_vpot->zero());
notify_solo_changed ();
notify_mute_changed ();
notify_panner_width_changed ();
notify_record_enable_changed ();
notify_trim_changed ();
+ notify_phase_changed ();
+ notify_processor_changed ();
}
void
queue_parameter_display (GainAutomation, gain_coefficient);
}
- queue_display_reset (2000);
_last_gain_position_written = normalized_position;
}
}
{
if (_route) {
- if (!_route->trim()) {
- _surface->write (_vpot->zero());
+ if (!_route->trim() || !route()->trim()->active()) {
+ return;
+ }
+ Control* control = 0;
+ ControlParameterMap::iterator i = control_by_parameter.find (TrimAutomation);
+
+ if (i == control_by_parameter.end()) {
return;
}
- Control* control = control_by_parameter[TrimAutomation];
+
+ control = i->second;
boost::shared_ptr<AutomationControl> ac = _route->trim_control();
queue_parameter_display (TrimAutomation, gain_coefficient);
}
_last_trim_position_written = normalized_position;
+ }
+ }
+}
+
+void
+Strip::notify_phase_changed (bool force_update)
+{
+ if (_route) {
+ if (!_route->phase_invert().size()) {
+ return;
+ }
+
+ Control* control = 0;
+ ControlParameterMap::iterator i = control_by_parameter.find (PhaseAutomation);
+
+ if (i == control_by_parameter.end()) {
+ return;
+ }
+
+ control = i->second;
+
+ float normalized_position = _route->phase_control()->get_value();
+
+ if (control == _fader) {
+ if (!_fader->in_use()) {
+ _surface->write (_fader->set_position (normalized_position));
+ queue_parameter_display (PhaseAutomation, normalized_position);
+ }
+ } else if (control == _vpot) {
+ _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
+ queue_parameter_display (PhaseAutomation, normalized_position);
+ }
+ }
+}
+
+void
+Strip::notify_processor_changed (bool force_update)
+{
+ if (_route) {
+ boost::shared_ptr<Processor> p = _route->nth_send (_current_send);
+ if (!p) {
+ return;
+ }
+
+ Control* control = 0;
+ ControlParameterMap::iterator i = control_by_parameter.find (SendAutomation);
+
+ if (i == control_by_parameter.end()) {
+ return;
+ }
+
+ control = i->second;
+
+ boost::shared_ptr<Send> s = boost::dynamic_pointer_cast<Send>(p);
+ boost::shared_ptr<Amp> a = s->amp();
+ boost::shared_ptr<AutomationControl> ac = a->gain_control();
+
+ float gain_coefficient = ac->get_value();
+ float normalized_position = ac->internal_to_interface (gain_coefficient);
- queue_display_reset (2000);
+ if (control == _fader) {
+ if (!_fader->in_use()) {
+ _surface->write (_fader->set_position (normalized_position));
+ queue_parameter_display (SendAutomation, gain_coefficient);
+ }
+ } else if (control == _vpot) {
+ _surface->write (_vpot->set (normalized_position, true, Pot::dot));
+ queue_parameter_display (SendAutomation, gain_coefficient);
}
}
}
return;
}
- if (_route) {
- string line1;
- string fullname = _route->name();
+ show_route_name ();
+}
- if (fullname.length() <= 6) {
- line1 = fullname;
- } else {
- line1 = PBD::short_version (fullname, 6);
+void
+Strip::show_route_name ()
+{
+ MackieControlProtocol::SubViewMode svm = _surface->mcp().subview_mode();
+
+ if (svm != MackieControlProtocol::None) {
+ /* subview mode is responsible for upper line */
+ return;
+ }
+
+ string fullname = string();
+ if (!_route) {
+ // make sure first three strips get cleared of view mode
+ if (_index > 2) {
+ return;
}
+ } else {
+ fullname = _route->name();
+ }
+ string line1;
+
+ if (fullname.length() <= 6) {
+ line1 = fullname;
+ } else {
+ line1 = PBD::short_version (fullname, 6);
+ }
+
+ _surface->write (display (0, line1));
+}
+
+void
+Strip::notify_eq_change (AutomationType type, uint32_t band, bool force_update)
+{
+ boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+
+ if (!r) {
+ /* not in subview mode */
+ return;
+ }
+
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::EQ) {
+ /* no longer in EQ subview mode */
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> control;
+
+ switch (type) {
+ case EQGain:
+ control = r->eq_gain_controllable (band);
+ break;
+ case EQFrequency:
+ control = r->eq_freq_controllable (band);
+ break;
+ case EQQ:
+ control = r->eq_q_controllable (band);
+ break;
+ case EQShape:
+ control = r->eq_shape_controllable (band);
+ break;
+ case EQHPF:
+ control = r->eq_hpf_controllable ();
+ break;
+ case EQEnable:
+ control = r->eq_enable_controllable ();
+ break;
+ default:
+ break;
+ }
+
+ if (control) {
+ float val = control->get_value();
+ queue_parameter_display (type, val);
+ /* update pot/encoder */
+ _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
+ }
+}
+
+void
+Strip::notify_dyn_change (AutomationType type, bool force_update, bool propagate_mode)
+{
+ boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+
+ if (!r) {
+ /* not in subview mode */
+ return;
+ }
+
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::Dynamics) {
+ /* no longer in EQ subview mode */
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> control;
+ bool reset_all = false;
+
+ switch (type) {
+ case CompThreshold:
+ control = r->comp_threshold_controllable ();
+ break;
+ case CompSpeed:
+ control = r->comp_speed_controllable ();
+ break;
+ case CompMode:
+ control = r->comp_mode_controllable ();
+ reset_all = true;
+ break;
+ case CompMakeup:
+ control = r->comp_makeup_controllable ();
+ break;
+ case CompRedux:
+ control = r->comp_redux_controllable ();
+ break;
+ case CompEnable:
+ control = r->comp_enable_controllable ();
+ break;
+ default:
+ break;
+ }
+
+ if (propagate_mode && reset_all) {
+ _surface->subview_mode_changed ();
+ }
- _surface->write (display (0, line1));
+ if (control) {
+ float val = control->get_value();
+ queue_parameter_display (type, val);
+ /* update pot/encoder */
+ _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
}
}
void
Strip::notify_panner_azi_changed (bool force_update)
{
- if (_route) {
+ if (!_route) {
+ return;
+ }
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan change for strip %1\n", _index));
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan change for strip %1\n", _index));
- boost::shared_ptr<Pannable> pannable = _route->pannable();
+ boost::shared_ptr<AutomationControl> pan_control = _route->pan_azimuth_control ();
- if (!pannable || !_route->panner()) {
- _surface->write (_vpot->zero());
- return;
- }
+ if (!pan_control) {
+ return;
+ }
- Control* control = control_by_parameter[PanAzimuthAutomation];
+ Control* control = 0;
+ ControlParameterMap::iterator i = control_by_parameter.find (PanAzimuthAutomation);
- if (!control) {
- return;
- }
+ if (i == control_by_parameter.end()) {
+ return;
+ }
- double pos = pannable->pan_azimuth_control->internal_to_interface (pannable->pan_azimuth_control->get_value());
+ control = i->second;
- if (force_update || pos != _last_pan_azi_position_written) {
+ double normalized_pos = pan_control->internal_to_interface (pan_control->get_value());
+ double internal_pos = pan_control->get_value();
- if (control == _fader) {
- if (!_fader->in_use()) {
- _surface->write (_fader->set_position (pos));
- queue_parameter_display (PanAzimuthAutomation, pos);
- }
- } else if (control == _vpot) {
- _surface->write (_vpot->set (pos, true, Pot::dot));
- queue_parameter_display (PanAzimuthAutomation, pos);
- }
+ if (force_update || (normalized_pos != _last_pan_azi_position_written)) {
- queue_display_reset (2000);
- _last_pan_azi_position_written = pos;
+ if (control == _fader) {
+ if (!_fader->in_use()) {
+ _surface->write (_fader->set_position (normalized_pos));
+ /* show actual internal value to user */
+ queue_parameter_display (PanAzimuthAutomation, internal_pos);
+ }
+ } else if (control == _vpot) {
+ _surface->write (_vpot->set (normalized_pos, true, Pot::dot));
+ /* show actual internal value to user */
+ queue_parameter_display (PanAzimuthAutomation, internal_pos);
}
+
+ _last_pan_azi_position_written = normalized_pos;
}
}
void
Strip::notify_panner_width_changed (bool force_update)
{
- if (_route) {
+ if (!_route) {
+ return;
+ }
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan width change for strip %1\n", _index));
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan width change for strip %1\n", _index));
- boost::shared_ptr<Pannable> pannable = _route->pannable();
+ boost::shared_ptr<AutomationControl> pan_control = _route->pan_width_control ();
- if (!pannable || !_route->panner()) {
- _surface->write (_vpot->zero());
- return;
- }
+ if (!pan_control) {
+ return;
+ }
+ Control* control = 0;
+ ControlParameterMap::iterator i = control_by_parameter.find (PanWidthAutomation);
- Control* control = control_by_parameter[PanWidthAutomation];
+ if (i == control_by_parameter.end()) {
+ return;
+ }
- if (!control) {
- return;
- }
+ control = i->second;
- double pos = pannable->pan_width_control->internal_to_interface (pannable->pan_width_control->get_value());
+ double pos = pan_control->internal_to_interface (pan_control->get_value());
- if (force_update || pos != _last_pan_azi_position_written) {
+ if (force_update || pos != _last_pan_width_position_written) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- if (control == _fader) {
- if (!control->in_use()) {
- _surface->write (_fader->set_position (pos));
- queue_parameter_display (PanWidthAutomation, pos);
- }
+ if (control == _fader) {
+ if (!control->in_use()) {
+ _surface->write (_fader->set_position (pos));
+ queue_parameter_display (PanWidthAutomation, pos);
}
-
- } else if (control == _vpot) {
- _surface->write (_vpot->set (pos, true, Pot::spread));
- queue_parameter_display (PanWidthAutomation, pos);
}
- queue_display_reset (2000);
- _last_pan_azi_position_written = pos;
+ } else if (control == _vpot) {
+ _surface->write (_vpot->set (pos, true, Pot::spread));
+ queue_parameter_display (PanWidthAutomation, pos);
}
+
+ _last_pan_width_position_written = pos;
}
}
if (ms & MackieControlProtocol::MODIFIER_CMDALT) {
_controls_locked = !_controls_locked;
_surface->write (display (1,_controls_locked ? "Locked" : "Unlock"));
- queue_display_reset (1000);
+ block_vpot_mode_display_for (1000);
return;
}
/* reset to default */
boost::shared_ptr<AutomationControl> ac = _fader->control ();
if (ac) {
- ac->set_value (ac->normal());
+ ac->set_value (ac->normal(), Controllable::NoGroup);
}
return;
}
void
Strip::vselect_event (Button&, ButtonState bs)
{
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+
+ /* subview mode: vpot press acts like a button for toggle parameters */
+
+ if (bs != press) {
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> control = _vpot->control ();
+ if (!control) {
+ return;
+ }
+
+ if (control->toggled()) {
+ if (control->toggled()) {
+ control->set_value (!control->get_value(), Controllable::NoGroup);
+ }
+ }
+
+ return;
+ }
+
if (bs == press) {
int ms = _surface->mcp().main_modifier_state();
if (ac) {
/* reset to default/normal value */
- ac->set_value (ac->normal());
+ ac->set_value (ac->normal(), Controllable::NoGroup);
}
} else {
if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
if (ac) {
- ac->set_value (ac->normal());
+ ac->set_value (ac->normal(), Controllable::NoGroup);
}
} else {
_fader->start_touch (_surface->mcp().transport_frame());
if (ac) {
- queue_parameter_display ((AutomationType) ac->parameter().type(), ac->internal_to_interface (ac->get_value()));
- queue_display_reset (2000);
+ queue_parameter_display ((AutomationType) ac->parameter().type(), ac->get_value());
}
}
/* apply change */
for (MackieControlProtocol::ControlList::iterator c = controls.begin(); c != controls.end(); ++c) {
- (*c)->set_value (new_value);
+ (*c)->set_value (new_value, Controllable::NoGroup);
}
} else {
void
Strip::do_parameter_display (AutomationType type, float val)
{
+ bool screen_hold = false;
+ char buf[16];
+
switch (type) {
case GainAutomation:
if (val == 0.0) {
_surface->write (display (1, " -inf "));
} else {
- char buf[16];
float dB = accurate_coefficient_to_dB (val);
snprintf (buf, sizeof (buf), "%6.1f", dB);
_surface->write (display (1, buf));
+ screen_hold = true;
}
break;
case PanAzimuthAutomation:
- if (_route) {
- boost::shared_ptr<Pannable> p = _route->pannable();
- if (p && _route->panner()) {
- string str =_route->panner()->value_as_string (p->pan_azimuth_control);
- _surface->write (display (1, str));
+ if (Profile->get_mixbus()) {
+ snprintf (buf, sizeof (buf), "%2.1f", val);
+ _surface->write (display (1, buf));
+ screen_hold = true;
+ } else {
+ if (_route) {
+ boost::shared_ptr<Pannable> p = _route->pannable();
+ if (p && _route->panner()) {
+ string str =_route->panner()->value_as_string (p->pan_azimuth_control);
+ _surface->write (display (1, str));
+ screen_hold = true;
+ }
}
}
break;
case PanWidthAutomation:
if (_route) {
- char buf[16];
snprintf (buf, sizeof (buf), "%5ld%%", lrintf ((val * 200.0)-100));
_surface->write (display (1, buf));
+ screen_hold = true;
}
break;
case TrimAutomation:
if (_route) {
- char buf[16];
float dB = accurate_coefficient_to_dB (val);
snprintf (buf, sizeof (buf), "%6.1f", dB);
_surface->write (display (1, buf));
+ screen_hold = true;
+ }
+ break;
+
+ case PhaseAutomation:
+ if (_route) {
+ if (_route->phase_control()->get_value() < 0.5) {
+ _surface->write (display (1, "Normal"));
+ } else {
+ _surface->write (display (1, "Invert"));
+ }
+ screen_hold = true;
}
break;
+ case SendAutomation:
+ if (val == 0.0) {
+ _surface->write (display (1, " -inf "));
+ } else {
+ float dB = accurate_coefficient_to_dB (val);
+ snprintf (buf, sizeof (buf), "%6.1f", dB);
+ _surface->write (display (1, buf));
+ screen_hold = true;
+ }
+ break;
+ case EQGain:
+ case EQFrequency:
+ case EQQ:
+ case EQShape:
+ case EQHPF:
+ case CompThreshold:
+ case CompSpeed:
+ case CompMakeup:
+ case CompRedux:
+ snprintf (buf, sizeof (buf), "%6.1f", val);
+ _surface->write (display (1, buf));
+ screen_hold = true;
+ break;
+ case EQEnable:
+ case CompEnable:
+ if (val >= 0.5) {
+ _surface->write (display (1, "on"));
+ } else {
+ _surface->write (display (1, "off"));
+ }
+ break;
+ case CompMode:
+ if (_surface->mcp().subview_route()) {
+ _surface->write (display (1, _surface->mcp().subview_route()->comp_mode_name (val)));
+ }
+ break;
default:
break;
}
+
+ if (screen_hold) {
+ block_vpot_mode_display_for (1000);
+ }
}
void
Strip::handle_fader (Fader& fader, float position)
{
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("fader to %1\n", position));
+ boost::shared_ptr<AutomationControl> ac = fader.control();
+ if (!ac) {
+ return;
+ }
fader.set_value (position);
*/
boost::shared_ptr<AutomationControl> ac = pot.control();
+ if (!ac) {
+ return;
+ }
double p = pot.get_value ();
p += delta;
- p = max (ac->lower(), p);
- p = min (ac->upper(), p);
+ // fader and pot should be the same and fader is hard coded 0 -> 1
+ p = max (0.0, p);
+ p = min (1.0, p);
pot.set_value (p);
}
void
-Strip::periodic (uint64_t usecs)
+Strip::periodic (ARDOUR::microseconds_t now)
{
+ bool reshow_vpot_mode = false;
+ bool reshow_name = false;
+ bool good_strip = true;
+
if (!_route) {
+ // view mode may cover as many as 3 strips
+ // needs to be cleared when there are less than 3 routes
+ if (_index > 2) {
+ return;
+ } else {
+ good_strip = false;
+ }
+ }
+
+ if (_block_screen_redisplay_until >= now) {
+ if (_surface->mcp().device_info().has_separate_meters()) {
+ goto meters;
+ }
+ /* no drawing here, for now */
+ return;
+
+ } else if (_block_screen_redisplay_until) {
+
+ /* timeout reached, reset */
+
+ _block_screen_redisplay_until = 0;
+ reshow_vpot_mode = (true && good_strip);
+ reshow_name = true;
+ }
+
+ if (_block_vpot_mode_redisplay_until >= now) {
return;
+ } else if (_block_vpot_mode_redisplay_until) {
+
+ /* timeout reached, reset */
+
+ _block_vpot_mode_redisplay_until = 0;
+ reshow_vpot_mode = (true && good_strip);
+ }
+
+ if (reshow_name) {
+ show_route_name ();
}
- update_automation ();
- update_meter ();
+ if (reshow_vpot_mode) {
+ return_to_vpot_mode_display ();
+ } else if (good_strip) {
+ /* no point doing this if we just switched back to vpot mode
+ display */
+ update_automation ();
+ }
- if (_reset_display_at && _reset_display_at < usecs) {
- reset_display ();
+ meters:
+ if (good_strip) {
+ update_meter ();
}
}
void
-Strip::redisplay ()
+Strip::redisplay (ARDOUR::microseconds_t now)
{
RedisplayRequest req;
bool have_request = false;
have_request = true;
}
+ if (_block_screen_redisplay_until >= now) {
+ return;
+ }
+
if (have_request) {
do_parameter_display (req.type, req.val);
}
void
Strip::update_automation ()
{
- ARDOUR::AutoState gain_state = _route->gain_control()->automation_state();
+ if (!_route) {
+ return;
+ }
- if (gain_state == Touch || gain_state == Play) {
+ ARDOUR::AutoState state = _route->gain_control()->automation_state();
+
+ if (state == Touch || state == Play) {
notify_gain_changed (false);
}
- if (_route->panner()) {
- ARDOUR::AutoState panner_state = _route->panner()->automation_state();
- if (panner_state == Touch || panner_state == Play) {
+ boost::shared_ptr<AutomationControl> pan_control = _route->pan_azimuth_control ();
+ if (pan_control) {
+ state = pan_control->automation_state ();
+ if (state == Touch || state == Play) {
notify_panner_azi_changed (false);
+ }
+ }
+
+ pan_control = _route->pan_width_control ();
+ if (pan_control) {
+ state = pan_control->automation_state ();
+ if (state == Touch || state == Play) {
notify_panner_width_changed (false);
}
}
- if (_route->trim()) {
+
+ if (_route->trim() && route()->trim()->active()) {
ARDOUR::AutoState trim_state = _route->trim_control()->automation_state();
if (trim_state == Touch || trim_state == Play) {
notify_trim_changed (false);
void
Strip::update_meter ()
{
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return;
+ }
+
if (_meter && _transport_is_rolling && _metering_active) {
float dB = const_cast<PeakMeter&> (_route->peak_meter()).meter_level (0, MeterMCP);
_meter->send_update (*_surface, dB);
}
string
-Strip::vpot_mode_string () const
+Strip::vpot_mode_string ()
{
boost::shared_ptr<AutomationControl> ac = _vpot->control();
-
if (!ac) {
return string();
}
- switch (ac->parameter().type()) {
- case GainAutomation:
+ if (control_by_parameter.find (GainAutomation)->second == _vpot) {
return "Fader";
- case TrimAutomation:
+ } else if (control_by_parameter.find (TrimAutomation)->second == _vpot) {
return "Trim";
- case PanAzimuthAutomation:
+ } else if (control_by_parameter.find (PhaseAutomation)->second == _vpot) {
+ return string_compose ("Phase%1", _route->phase_control()->channel() + 1);
+ } else if (control_by_parameter.find (SendAutomation)->second == _vpot) {
+ // should be bus name
+ boost::shared_ptr<Processor> p = _route->nth_send (_current_send);
+ if (p) {
+ return p->name();
+ }
+ } else if (control_by_parameter.find (PanAzimuthAutomation)->second == _vpot) {
return "Pan";
- case PanWidthAutomation:
+ } else if (control_by_parameter.find (PanWidthAutomation)->second == _vpot) {
return "Width";
- case PanElevationAutomation:
+ } else if (control_by_parameter.find (PanElevationAutomation)->second == _vpot) {
return "Elev";
- case PanFrontBackAutomation:
+ } else if (control_by_parameter.find (PanFrontBackAutomation)->second == _vpot) {
return "F/Rear";
- case PanLFEAutomation:
+ } else if (control_by_parameter.find (PanLFEAutomation)->second == _vpot) {
return "LFE";
}
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return string();
+ }
+
return "???";
}
return;
}
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* do not change vpot mode while in flipped mode */
- DEBUG_TRACE (DEBUG::MackieControl, "not stepping pot mode - in flip mode\n");
- _surface->write (display (1, "Flip"));
- queue_display_reset (1000);
- return;
- }
// WIP
int pm = _surface->mcp().pot_mode();
switch (pm) {
- case MackieControlProtocol::Pan:
- // This needs to set current pan mode (azimuth or width... or whatever)
- set_vpot_parameter (_pan_mode);
- DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Pan mode.\n");
- break;
- case MackieControlProtocol::Tracks: // should change the Tracks to Trim
- DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Trim mode.\n");
- set_vpot_parameter (TrimAutomation);
- break;
- case MackieControlProtocol::Send:
- DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Send mode.\n");
- // set to current send
- break;
- default:
- break;
- }
-
- if (notify) {
- notify_all ();
- }
-}
-
-void
-Strip::flip_mode_changed (bool notify)
-{
- if (!_route) {
- return;
+ case MackieControlProtocol::Pan:
+ // This needs to set current pan mode (azimuth or width... or whatever)
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Assign pot to Pan mode %1\n", enum_2_string (_pan_mode)));
+ set_vpot_parameter (_pan_mode);
+ break;
+ case MackieControlProtocol::Trim:
+ DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Trim mode.\n");
+ set_vpot_parameter (_trim_mode);
+ break;
+ case MackieControlProtocol::Send:
+ // _current_send has the number of the send we will show
+ DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Send mode.\n");
+ set_vpot_parameter (SendAutomation);
+ break;
}
- reset_saved_values ();
-
- boost::shared_ptr<AutomationControl> fader_controllable = _fader->control ();
- boost::shared_ptr<AutomationControl> vpot_controllable = _vpot->control ();
-
- _fader->set_control (vpot_controllable);
- _vpot->set_control (fader_controllable);
-
- control_by_parameter[fader_controllable->parameter()] = _vpot;
- control_by_parameter[vpot_controllable->parameter()] = _fader;
-
- _surface->write (display (1, vpot_mode_string ()));
-
if (notify) {
notify_all ();
}
}
void
-Strip::queue_display_reset (uint32_t msecs)
+Strip::block_screen_display_for (uint32_t msecs)
{
- struct timeval now;
- struct timeval delta;
- struct timeval when;
- gettimeofday (&now, 0);
-
- delta.tv_sec = msecs/1000;
- delta.tv_usec = (msecs - ((msecs/1000) * 1000)) * 1000;
-
- timeradd (&now, &delta, &when);
-
- _reset_display_at = (when.tv_sec * 1000000) + when.tv_usec;
+ _block_screen_redisplay_until = ARDOUR::get_microseconds() + (msecs * 1000);
}
void
-Strip::clear_display_reset ()
+Strip::block_vpot_mode_display_for (uint32_t msecs)
{
- _reset_display_at = 0;
+ _block_vpot_mode_redisplay_until = ARDOUR::get_microseconds() + (msecs * 1000);
}
void
-Strip::reset_display ()
+Strip::return_to_vpot_mode_display ()
{
- if (_route) {
+ /* returns the second line of the two-line per-strip display
+ back the mode where it shows what the VPot controls.
+ */
+
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ /* do nothing - second line shows value of current subview parameter */
+ return;
+ } else if (_route) {
_surface->write (display (1, vpot_mode_string()));
} else {
_surface->write (blank_display (1));
}
-
- clear_display_reset ();
}
-struct RouteCompareByName {
- bool operator() (boost::shared_ptr<Route> a, boost::shared_ptr<Route> b) {
- return a->name().compare (b->name()) < 0;
- }
-};
-
void
-Strip::maybe_add_to_bundle_map (BundleMap& bm, boost::shared_ptr<Bundle> b, bool for_input, const ChanCount& channels)
+Strip::next_pot_mode ()
{
- if (b->ports_are_outputs() == !for_input || b->nchannels() != channels) {
+ vector<AutomationType>::iterator i;
+
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ /* do not change vpot mode while in flipped mode */
+ DEBUG_TRACE (DEBUG::MackieControl, "not stepping pot mode - in flip mode\n");
+ _surface->write (display (1, "Flip"));
+ block_vpot_mode_display_for (1000);
return;
}
- bm[b->name()] = b;
-}
-void
-Strip::build_input_list (const ChanCount& channels)
-{
- boost::shared_ptr<ARDOUR::BundleList> b = _surface->mcp().get_session().bundles ();
+ boost::shared_ptr<AutomationControl> ac = _vpot->control();
+
+ if (!ac) {
+ return;
+ }
- input_bundles.clear ();
- /* give user bundles first chance at being in the menu */
+ if (_surface->mcp().pot_mode() == MackieControlProtocol::Pan) {
- for (ARDOUR::BundleList::iterator i = b->begin(); i != b->end(); ++i) {
- if (boost::dynamic_pointer_cast<UserBundle> (*i)) {
- maybe_add_to_bundle_map (input_bundles, *i, true, channels);
+ if (possible_pot_parameters.empty() || (possible_pot_parameters.size() == 1 && possible_pot_parameters.front() == ac->parameter().type())) {
+ return;
}
- }
- for (ARDOUR::BundleList::iterator i = b->begin(); i != b->end(); ++i) {
- if (boost::dynamic_pointer_cast<UserBundle> (*i) == 0) {
- maybe_add_to_bundle_map (input_bundles, *i, true, channels);
+ for (i = possible_pot_parameters.begin(); i != possible_pot_parameters.end(); ++i) {
+ if ((*i) == ac->parameter().type()) {
+ break;
+ }
}
- }
- boost::shared_ptr<ARDOUR::RouteList> routes = _surface->mcp().get_session().get_routes ();
- RouteList copy = *routes;
- copy.sort (RouteCompareByName ());
+ /* move to the next mode in the list, or back to the start (which will
+ also happen if the current mode is not in the current pot mode list)
+ */
- for (ARDOUR::RouteList::const_iterator i = copy.begin(); i != copy.end(); ++i) {
- maybe_add_to_bundle_map (input_bundles, (*i)->output()->bundle(), true, channels);
- }
+ if (i != possible_pot_parameters.end()) {
+ ++i;
+ }
+
+ if (i == possible_pot_parameters.end()) {
+ i = possible_pot_parameters.begin();
+ }
+
+ set_vpot_parameter (*i);
+ } else if (_surface->mcp().pot_mode() == MackieControlProtocol::Trim) {
+ if (possible_trim_parameters.empty() || (possible_trim_parameters.size() == 1 && possible_trim_parameters.front() == ac->parameter().type())) {
+ return;
+ }
+ for (i = possible_trim_parameters.begin(); i != possible_trim_parameters.end(); ++i) {
+ if ((*i) == ac->parameter().type()) {
+ break;
+ }
+ }
+ if ((*i) == PhaseAutomation && _route->phase_invert().size() > 1) {
+ // There are more than one channel of phase
+ if ((_route->phase_control()->channel() + 1) < _route->phase_invert().size()) {
+ _route->phase_control()->set_channel(_route->phase_control()->channel() + 1);
+ set_vpot_parameter (*i);
+ return;
+ } else {
+ _route->phase_control()->set_channel(0);
+ }
+ }
+ /* move to the next mode in the list, or back to the start (which will
+ also happen if the current mode is not in the current pot mode list)
+ */
+
+ if (i != possible_trim_parameters.end()) {
+ ++i;
+ }
+
+ if (i == possible_trim_parameters.end()) {
+ i = possible_trim_parameters.begin();
+ }
+ set_vpot_parameter (*i);
+ } else if (_surface->mcp().pot_mode() == MackieControlProtocol::Send) {
+ boost::shared_ptr<Processor> p = _route->nth_send (_current_send);
+ if (!p) {
+ return;
+ }
+ p = _route->nth_send (_current_send + 1);
+ if (p) {
+ _current_send++;
+ if (p->name() == "Monitor 1") { // skip monitor
+ p = _route->nth_send (_current_send + 1);
+ if (p) {
+ _current_send++;
+ } else {
+ _current_send = 0;
+ }
+ }
+ } else {
+ _current_send = 0;
+ }
+ set_vpot_parameter (SendAutomation);
+ }
}
void
-Strip::build_output_list (const ChanCount& channels)
+Strip::subview_mode_changed ()
{
- boost::shared_ptr<ARDOUR::BundleList> b = _surface->mcp().get_session().bundles ();
+ boost::shared_ptr<Route> r = _surface->mcp().subview_route();
- output_bundles.clear ();
+ subview_connections.drop_connections ();
- /* give user bundles first chance at being in the menu */
+ switch (_surface->mcp().subview_mode()) {
+ case MackieControlProtocol::None:
+ set_vpot_parameter (vpot_parameter);
+ notify_metering_state_changed ();
+ eq_band = -1;
+ break;
- for (ARDOUR::BundleList::iterator i = b->begin(); i != b->end(); ++i) {
- if (boost::dynamic_pointer_cast<UserBundle> (*i)) {
- maybe_add_to_bundle_map (output_bundles, *i, false, channels);
+ case MackieControlProtocol::EQ:
+ if (r) {
+ setup_eq_vpot (r);
+ } else {
+ /* leave it as it was */
}
- }
+ break;
- for (ARDOUR::BundleList::iterator i = b->begin(); i != b->end(); ++i) {
- if (boost::dynamic_pointer_cast<UserBundle> (*i) == 0) {
- maybe_add_to_bundle_map (output_bundles, *i, false, channels);
+ case MackieControlProtocol::Dynamics:
+ if (r) {
+ setup_dyn_vpot (r);
+ } else {
+ /* leave it as it was */
}
+ break;
}
+}
- boost::shared_ptr<ARDOUR::RouteList> routes = _surface->mcp().get_session().get_routes ();
- RouteList copy = *routes;
- copy.sort (RouteCompareByName ());
+void
+Strip::setup_dyn_vpot (boost::shared_ptr<Route> r)
+{
+ if (!r) {
+ return;
+ }
- for (ARDOUR::RouteList::const_iterator i = copy.begin(); i != copy.end(); ++i) {
- maybe_add_to_bundle_map (output_bundles, (*i)->input()->bundle(), false, channels);
+ boost::shared_ptr<AutomationControl> tc = r->comp_threshold_controllable ();
+ boost::shared_ptr<AutomationControl> sc = r->comp_speed_controllable ();
+ boost::shared_ptr<AutomationControl> mc = r->comp_mode_controllable ();
+ boost::shared_ptr<AutomationControl> kc = r->comp_makeup_controllable ();
+ boost::shared_ptr<AutomationControl> rc = r->comp_redux_controllable ();
+ boost::shared_ptr<AutomationControl> ec = r->comp_enable_controllable ();
+
+ uint32_t pos = _surface->mcp().global_index (*this);
+
+ /* we will control the pos-th available parameter, from the list in the
+ * order shown above.
+ */
+
+ vector<boost::shared_ptr<AutomationControl> > available;
+ vector<AutomationType> params;
+
+ if (tc) { available.push_back (tc); params.push_back (CompThreshold); }
+ if (sc) { available.push_back (sc); params.push_back (CompSpeed); }
+ if (mc) { available.push_back (mc); params.push_back (CompMode); }
+ if (kc) { available.push_back (kc); params.push_back (CompMakeup); }
+ if (rc) { available.push_back (rc); params.push_back (CompRedux); }
+ if (ec) { available.push_back (ec); params.push_back (CompEnable); }
+
+ if (pos >= available.size()) {
+ /* this knob is not needed to control the available parameters */
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ _surface->write (display (0, string()));
+ _surface->write (display (1, string()));
+ return;
}
+
+ boost::shared_ptr<AutomationControl> pc;
+ AutomationType param;
+
+ pc = available[pos];
+ param = params[pos];
+
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_dyn_change, this, param, false, true), ui_context());
+ _vpot->set_control (pc);
+
+ string pot_id;
+
+ switch (param) {
+ case CompThreshold:
+ pot_id = "Thresh";
+ break;
+ case CompSpeed:
+ if (mc) {
+ pot_id = r->comp_speed_name (mc->get_value());
+ } else {
+ pot_id = "Speed";
+ }
+ break;
+ case CompMode:
+ pot_id = "Mode";
+ break;
+ case CompMakeup:
+ pot_id = "Makeup";
+ break;
+ case CompRedux:
+ pot_id = "Redux";
+ break;
+ case CompEnable:
+ pot_id = "on/off";
+ break;
+ default:
+ break;
+ }
+
+ if (!pot_id.empty()) {
+ _surface->write (display (0, pot_id));
+ }
+
+ notify_dyn_change (param, true, false);
}
void
-Strip::next_pot_mode ()
+Strip::setup_eq_vpot (boost::shared_ptr<Route> r)
{
- vector<Evoral::Parameter>::iterator i;
+ uint32_t bands = r->eq_band_cnt ();
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* do not change vpot mode while in flipped mode */
- DEBUG_TRACE (DEBUG::MackieControl, "not stepping pot mode - in flip mode\n");
- _surface->write (display (1, "Flip"));
- queue_display_reset (1000);
+ if (bands == 0) {
+ /* should never get here */
return;
}
+ /* figure out how many params per band are available */
- boost::shared_ptr<AutomationControl> ac = _vpot->control();
+ boost::shared_ptr<AutomationControl> pc;
+ uint32_t params_per_band = 0;
- if (!ac) {
- return;
+ if ((pc = r->eq_gain_controllable (0))) {
+ params_per_band += 1;
}
- if (_surface->mcp().pot_mode() == MackieControlProtocol::Pan) {
- if (possible_pot_parameters.empty() || (possible_pot_parameters.size() == 1 && possible_pot_parameters.front() == ac->parameter())) {
- return;
+ if ((pc = r->eq_freq_controllable (0))) {
+ params_per_band += 1;
+ }
+ if ((pc = r->eq_q_controllable (0))) {
+ params_per_band += 1;
+ }
+ if ((pc = r->eq_shape_controllable (0))) {
+ params_per_band += 1;
+ }
+
+ /* pick the one for this strip, based on its global position across
+ * all surfaces
+ */
+
+ pc.reset ();
+
+ const uint32_t total_band_parameters = bands * params_per_band;
+ const uint32_t global_pos = _surface->mcp().global_index (*this);
+ AutomationType param = NullAutomation;
+ string band_name;
+
+ eq_band = -1;
+
+ if (global_pos < total_band_parameters) {
+
+ /* show a parameter for an EQ band */
+
+ const uint32_t parameter = global_pos % params_per_band;
+ eq_band = global_pos / params_per_band;
+ band_name = r->eq_band_name (eq_band);
+
+ switch (parameter) {
+ case 0:
+ pc = r->eq_gain_controllable (eq_band);
+ param = EQGain;
+ break;
+ case 1:
+ pc = r->eq_freq_controllable (eq_band);
+ param = EQFrequency;
+ break;
+ case 2:
+ pc = r->eq_q_controllable (eq_band);
+ param = EQQ;
+ break;
+ case 3:
+ pc = r->eq_shape_controllable (eq_band);
+ param = EQShape;
+ break;
}
- for (i = possible_pot_parameters.begin(); i != possible_pot_parameters.end(); ++i) {
- if ((*i) == ac->parameter()) {
- break;
- }
+ } else {
+
+ /* show a non-band parameter (HPF or enable)
+ */
+
+ uint32_t parameter = global_pos - total_band_parameters;
+
+ switch (parameter) {
+ case 0: /* first control after band parameters */
+ pc = r->eq_hpf_controllable();
+ param = EQHPF;
+ break;
+ case 1: /* second control after band parameters */
+ pc = r->eq_enable_controllable();
+ param = EQEnable;
+ break;
+ default:
+ /* nothing to control */
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ _surface->write (display (0, string()));
+ _surface->write (display (1, string()));
+ /* done */
+ return;
+ break;
}
- /* move to the next mode in the list, or back to the start (which will
- also happen if the current mode is not in the current pot mode list)
- */
+ }
- if (i != possible_pot_parameters.end()) {
- ++i;
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_eq_change, this, param, eq_band, false), ui_context());
+ _vpot->set_control (pc);
+
+ string pot_id;
+
+ switch (param) {
+ case EQGain:
+ pot_id = band_name + "Gain";
+ break;
+ case EQFrequency:
+ pot_id = band_name + "Freq";
+ break;
+ case EQQ:
+ pot_id = band_name + " Q";
+ break;
+ case EQShape:
+ pot_id = band_name + " Shp";
+ break;
+ case EQHPF:
+ pot_id = "HPFreq";
+ break;
+ case EQEnable:
+ pot_id = "on/off";
+ break;
+ default:
+ break;
}
- if (i == possible_pot_parameters.end()) {
- i = possible_pot_parameters.begin();
+ if (!pot_id.empty()) {
+ _surface->write (display (0, pot_id));
}
- set_vpot_parameter (*i);
+
+ notify_eq_change (param, eq_band, true);
}
}
void
-Strip::set_vpot_parameter (Evoral::Parameter p)
+Strip::set_vpot_parameter (AutomationType p)
{
- boost::shared_ptr<Pannable> pannable;
+ if (!_route || (p == NullAutomation)) {
+ control_by_parameter[vpot_parameter] = 0;
+ vpot_parameter = NullAutomation;
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ _surface->write (display (1, string()));
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> pan_control;
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("switch to vpot mode %1\n", p));
reset_saved_values ();
- for (int i = 0; i <= TrimAutomation; ++i) {
- if (control_by_parameter[i] == _vpot) {
- control_by_parameter[i] = 0;
+
+ /* unset any mapping between the vpot and any existing parameters */
+
+ for (ControlParameterMap::iterator i = control_by_parameter.begin(); i != control_by_parameter.end(); ++i) {
+
+ if (i != control_by_parameter.end() && i->second == _vpot) {
+ i->second = 0;
}
}
- switch (p.type()) {
+ switch (p) {
case PanAzimuthAutomation:
- _pan_mode = PanAzimuthAutomation;
- pannable = _route->pannable ();
- if (pannable) {
+ if ((pan_control = _route->pan_azimuth_control ())) {
if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, pan azi to fader */
- _vpot->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- if (pannable) {
- _fader->set_control (pannable->pan_azimuth_control);
+ _pan_mode = PanAzimuthAutomation;
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ /* gain to vpot, pan azi to fader */
+ _vpot->set_control (_route->gain_control());
+ vpot_parameter = GainAutomation;
+ control_by_parameter[GainAutomation] = _vpot;
+ _fader->set_control (pan_control);
control_by_parameter[PanAzimuthAutomation] = _fader;
} else {
_fader->set_control (boost::shared_ptr<AutomationControl>());
}
} else {
/* gain to fader, pan azi to vpot */
+ vpot_parameter = PanAzimuthAutomation;
_fader->set_control (_route->gain_control());
control_by_parameter[GainAutomation] = _fader;
- if (pannable) {
- _vpot->set_control (pannable->pan_azimuth_control);
- control_by_parameter[PanAzimuthAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanAzimuthAutomation] = 0;
- }
+ _vpot->set_control (pan_control);
+ control_by_parameter[PanAzimuthAutomation] = _vpot;
}
+ } else {
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[PanAzimuthAutomation] = 0;
}
break;
+
case PanWidthAutomation:
- _pan_mode = PanWidthAutomation;
- pannable = _route->pannable ();
- if (pannable) {
+ if ((pan_control = _route->pan_width_control ())) {
if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, pan width to fader */
- _vpot->set_control (_route->gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- if (pannable) {
- _fader->set_control (pannable->pan_width_control);
+ _pan_mode = PanWidthAutomation;
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ /* gain to vpot, pan width to fader */
+ _vpot->set_control (_route->gain_control());
+ vpot_parameter = GainAutomation;
+ control_by_parameter[GainAutomation] = _vpot;
+ _fader->set_control (pan_control);
control_by_parameter[PanWidthAutomation] = _fader;
} else {
_fader->set_control (boost::shared_ptr<AutomationControl>());
}
} else {
/* gain to fader, pan width to vpot */
+ vpot_parameter = PanWidthAutomation;
_fader->set_control (_route->gain_control());
control_by_parameter[GainAutomation] = _fader;
- if (pannable) {
- _vpot->set_control (pannable->pan_width_control);
- control_by_parameter[PanWidthAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanWidthAutomation] = 0;
- }
+ _vpot->set_control (pan_control);
+ control_by_parameter[PanWidthAutomation] = _vpot;
}
+ } else {
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[PanWidthAutomation] = 0;
}
break;
+
case PanElevationAutomation:
break;
case PanFrontBackAutomation:
case PanLFEAutomation:
break;
case TrimAutomation:
- if (_route->trim()) {
+ _trim_mode = TrimAutomation;
+ vpot_parameter = TrimAutomation;
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ /* gain to vpot, trim to fader */
+ _vpot->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _vpot;
+ if (_route->trim() && route()->trim()->active()) {
+ _fader->set_control (_route->trim_control());
+ control_by_parameter[TrimAutomation] = _fader;
+ } else {
+ _fader->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[TrimAutomation] = 0;
+ }
+ } else {
+ /* gain to fader, trim to vpot */
+ _fader->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _fader;
+ if (_route->trim() && route()->trim()->active()) {
+ _vpot->set_control (_route->trim_control());
+ control_by_parameter[TrimAutomation] = _vpot;
+ } else {
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[TrimAutomation] = 0;
+ }
+ }
+ break;
+ case PhaseAutomation:
+ _trim_mode = PhaseAutomation;
+ vpot_parameter = PhaseAutomation;
+ if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ /* gain to vpot, phase to fader */
+ _vpot->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _vpot;
+ if (_route->phase_invert().size()) {
+ _fader->set_control (_route->phase_control());
+ control_by_parameter[PhaseAutomation] = _fader;
+ } else {
+ _fader->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[PhaseAutomation] = 0;
+ }
+ } else {
+ /* gain to fader, phase to vpot */
+ _fader->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _fader;
+ if (_route->phase_invert().size()) {
+ _vpot->set_control (_route->phase_control());
+ control_by_parameter[PhaseAutomation] = _vpot;
+ } else {
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[PhaseAutomation] = 0;
+ }
+ }
+ break;
+ case SendAutomation:
+ if (!Profile->get_mixbus()) {
if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, trim to fader */
+ // gain to vpot, send to fader
_vpot->set_control (_route->gain_control());
control_by_parameter[GainAutomation] = _vpot;
- _fader->set_control (_route->trim_control());
- control_by_parameter[TrimAutomation] = _fader;
+ // test for send to control
+ boost::shared_ptr<Processor> p = _route->nth_send (_current_send);
+ if (p && p->name() != "Monitor 1") {
+ boost::shared_ptr<Send> s = boost::dynamic_pointer_cast<Send>(p);
+ boost::shared_ptr<Amp> a = s->amp();
+ _fader->set_control (a->gain_control());
+ // connect to signal
+ send_connections.drop_connections ();
+ a->gain_control()->Changed.connect(send_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_processor_changed, this, false), ui_context());
+ control_by_parameter[SendAutomation] = _fader;
+ } else {
+ _fader->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[SendAutomation] = 0;
+ }
} else {
- /* gain to fader, trim to vpot */
+ // gain to fader, send to vpot
_fader->set_control (_route->gain_control());
control_by_parameter[GainAutomation] = _fader;
- _vpot->set_control (_route->trim_control());
- control_by_parameter[TrimAutomation] = _vpot;
+ boost::shared_ptr<Processor> p = _route->nth_send (_current_send);
+ if (p && p->name() != "Monitor 1") {
+ boost::shared_ptr<Send> s = boost::dynamic_pointer_cast<Send>(p);
+ boost::shared_ptr<Amp> a = s->amp();
+ _vpot->set_control (a->gain_control());
+ // connect to signal
+ send_connections.drop_connections ();
+ a->gain_control()->Changed.connect(send_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_processor_changed, this, false), ui_context());
+ control_by_parameter[SendAutomation] = _vpot;
+ } else {
+ // gain to fader, send to vpot
+ _fader->set_control (_route->gain_control());
+ control_by_parameter[GainAutomation] = _fader;
+ boost::shared_ptr<Processor> p = _route->nth_send (_current_send);
+ if (p && p->name() != "Monitor 1") {
+ boost::shared_ptr<Send> s = boost::dynamic_pointer_cast<Send>(p);
+ boost::shared_ptr<Amp> a = s->amp();
+ _vpot->set_control (a->gain_control());
+ // connect to signal
+ send_connections.drop_connections ();
+ a->gain_control()->Changed.connect(send_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_processor_changed, this, false), ui_context());
+ control_by_parameter[SendAutomation] = _vpot;
+ } else {
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ control_by_parameter[SendAutomation] = 0;
+ }
+ }
}
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[TrimAutomation] = 0;
}
break;
default:
_surface->write (display (1, vpot_mode_string()));
}
+bool
+Strip::is_midi_track () const
+{
+ return boost::dynamic_pointer_cast<MidiTrack>(_route) != 0;
+}
+
void
Strip::reset_saved_values ()
{
void
Strip::notify_metering_state_changed()
{
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return;
+ }
+
if (!_route || !_meter) {
return;
}
projects / ardour.git / blobdiff