/*
- * Copyright (c) 2002-2007, Communications and Remote Sensing Laboratory, Universite catholique de Louvain (UCL), Belgium
- * Copyright (c) 2002-2007, Professor Benoit Macq
+ * The copyright in this software is being made available under the 2-clauses
+ * BSD License, included below. This software may be subject to other third
+ * party and contributor rights, including patent rights, and no such rights
+ * are granted under this license.
+ *
+ * Copyright (c) 2002-2014, Universite catholique de Louvain (UCL), Belgium
+ * Copyright (c) 2002-2014, Professor Benoit Macq
* Copyright (c) 2001-2003, David Janssens
* Copyright (c) 2002-2003, Yannick Verschueren
- * Copyright (c) 2003-2007, Francois-Olivier Devaux and Antonin Descampe
+ * Copyright (c) 2003-2007, Francois-Olivier Devaux
+ * Copyright (c) 2003-2014, Antonin Descampe
* Copyright (c) 2005, Herve Drolon, FreeImage Team
* Copyright (c) 2006-2007, Parvatha Elangovan
* Copyright (c) 2008, Jerome Fimes, Communications & Systemes <jerome.fimes@c-s.fr>
* Copyright (c) 2010-2011, Kaori Hagihara
- * Copyright (c) 2011, Mickael Savinaud, Communications & Systemes <mickael.savinaud@c-s.fr>
+ * Copyright (c) 2011-2012, Centre National d'Etudes Spatiales (CNES), France
+ * Copyright (c) 2012, CS Systemes d'Information, France
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
==========================================================
*/
+/*
+The inline keyword is supported by C99 but not by C90.
+Most compilers implement their own version of this keyword ...
+*/
+#ifndef INLINE
+ #if defined(_MSC_VER)
+ #define INLINE __forceinline
+ #elif defined(__GNUC__)
+ #define INLINE __inline__
+ #elif defined(__MWERKS__)
+ #define INLINE inline
+ #else
+ /* add other compilers here ... */
+ #define INLINE
+ #endif /* defined(<Compiler>) */
+#endif /* INLINE */
+
/* deprecated attribute */
#ifdef __GNUC__
- #define DEPRECATED(func) func __attribute__ ((deprecated))
+ #define OPJ_DEPRECATED(func) func __attribute__ ((deprecated))
#elif defined(_MSC_VER)
- #define DEPRECATED(func) __declspec(deprecated) func
+ #define OPJ_DEPRECATED(func) __declspec(deprecated) func
#else
#pragma message("WARNING: You need to implement DEPRECATED for this compiler")
- #define DEPRECATED(func) func
+ #define OPJ_DEPRECATED(func) func
#endif
#if defined(OPJ_STATIC) || !defined(_WIN32)
/* http://gcc.gnu.org/wiki/Visibility */
-#if __GNUC__ >= 4
-#define OPJ_API __attribute__ ((visibility ("default")))
-#define OPJ_LOCAL __attribute__ ((visibility ("hidden")))
-#else
-#define OPJ_API
-#define OPJ_LOCAL
-#endif
-#define OPJ_CALLCONV
+# if __GNUC__ >= 4
+# if defined(OPJ_STATIC) /* static library uses "hidden" */
+# define OPJ_API __attribute__ ((visibility ("hidden")))
+# else
+# define OPJ_API __attribute__ ((visibility ("default")))
+# endif
+# define OPJ_LOCAL __attribute__ ((visibility ("hidden")))
+# else
+# define OPJ_API
+# define OPJ_LOCAL
+# endif
+# define OPJ_CALLCONV
#else
-#define OPJ_CALLCONV __stdcall
+# define OPJ_CALLCONV __stdcall
/*
The following ifdef block is the standard way of creating macros which make exporting
from a DLL simpler. All files within this DLL are compiled with the OPJ_EXPORTS
symbol defined on the command line. this symbol should not be defined on any project
that uses this DLL. This way any other project whose source files include this file see
-OPJ_API functions as being imported from a DLL, wheras this DLL sees symbols
+OPJ_API functions as being imported from a DLL, whereas this DLL sees symbols
defined with this macro as being exported.
*/
-#if defined(OPJ_EXPORTS) || defined(DLL_EXPORT)
-#define OPJ_API __declspec(dllexport)
-#else
-#define OPJ_API __declspec(dllimport)
-#endif /* OPJ_EXPORTS */
+# if defined(OPJ_EXPORTS) || defined(DLL_EXPORT)
+# define OPJ_API __declspec(dllexport)
+# else
+# define OPJ_API __declspec(dllimport)
+# endif /* OPJ_EXPORTS */
#endif /* !OPJ_STATIC || !_WIN32 */
-typedef int opj_bool; /*FIXME it should be to follow the name of others OPJ_TYPE -> OPJ_BOOL*/
+typedef int OPJ_BOOL;
#define OPJ_TRUE 1
#define OPJ_FALSE 0
typedef int64_t OPJ_INT64;
typedef uint64_t OPJ_UINT64;
+typedef int64_t OPJ_OFF_T; /* 64-bit file offset type */
+
+#include <stdio.h>
+typedef size_t OPJ_SIZE_T;
+
/* Avoid compile-time warning because parameter is not used */
#define OPJ_ARG_NOT_USED(x) (void)(x)
#define OPJ_PATH_LEN 4096 /**< Maximum allowed size for filenames */
-#define J2K_MAXRLVLS 33 /**< Number of maximum resolution level authorized */
-#define J2K_MAXBANDS (3*J2K_MAXRLVLS-2) /**< Number of maximum sub-band linked to number of resolution level */
+#define OPJ_J2K_MAXRLVLS 33 /**< Number of maximum resolution level authorized */
+#define OPJ_J2K_MAXBANDS (3*OPJ_J2K_MAXRLVLS-2) /**< Number of maximum sub-band linked to number of resolution level */
-#define J2K_DEFAULT_NB_SEGS 10
-#define J2K_STREAM_CHUNK_SIZE 0x100000 /** 1 mega by default */
-#define J2K_DEFAULT_HEADER_SIZE 1000
-#define J2K_MCC_DEFAULT_NB_RECORDS 10
-#define J2K_MCT_DEFAULT_NB_RECORDS 10
+#define OPJ_J2K_DEFAULT_NB_SEGS 10
+#define OPJ_J2K_STREAM_CHUNK_SIZE 0x100000 /** 1 mega by default */
+#define OPJ_J2K_DEFAULT_HEADER_SIZE 1000
+#define OPJ_J2K_MCC_DEFAULT_NB_RECORDS 10
+#define OPJ_J2K_MCT_DEFAULT_NB_RECORDS 10
-/* UniPG>> */
+/* UniPG>> */ /* NOT YET USED IN THE V2 VERSION OF OPENJPEG */
#define JPWL_MAX_NO_TILESPECS 16 /**< Maximum number of tile parts expected by JPWL: increase at your will */
#define JPWL_MAX_NO_PACKSPECS 16 /**< Maximum number of packet parts expected by JPWL: increase at your will */
#define JPWL_MAX_NO_MARKERS 512 /**< Maximum number of JPWL markers: increase at your will */
/* <<UniPG */
/**
- * FIXME EXPERIMENTAL FOR THE MOMENT
- * Supported options about file information
+ * EXPERIMENTAL FOR THE MOMENT
+ * Supported options about file information used only in j2k_dump
*/
#define OPJ_IMG_INFO 1 /**< Basic image information provided to the user */
#define OPJ_J2K_MH_INFO 2 /**< Codestream information based only on the main header */
#define OPJ_J2K_TH_INFO 4 /**< Tile information based on the current tile header */
-/*FIXME #define OPJ_J2K_CSTR_INFO 6*/ /**< */
+#define OPJ_J2K_TCH_INFO 8 /**< Tile/Component information of all tiles */
#define OPJ_J2K_MH_IND 16 /**< Codestream index based only on the main header */
#define OPJ_J2K_TH_IND 32 /**< Tile index based on the current tile */
/*FIXME #define OPJ_J2K_CSTR_IND 48*/ /**< */
#define OPJ_JP2_INFO 128 /**< JP2 file information */
#define OPJ_JP2_IND 256 /**< JP2 file index */
+/**
+ * JPEG 2000 Profiles, see Table A.10 from 15444-1 (updated in various AMD)
+ * These values help chosing the RSIZ value for the J2K codestream.
+ * The RSIZ value triggers various encoding options, as detailed in Table A.10.
+ * If OPJ_PROFILE_PART2 is chosen, it has to be combined with one or more extensions
+ * described hereunder.
+ * Example: rsiz = OPJ_PROFILE_PART2 | OPJ_EXTENSION_MCT;
+ * For broadcast profiles, the OPJ_PROFILE value has to be combined with the targeted
+ * mainlevel (3-0 LSB, value between 0 and 11):
+ * Example: rsiz = OPJ_PROFILE_BC_MULTI | 0x0005; (here mainlevel 5)
+ * For IMF profiles, the OPJ_PROFILE value has to be combined with the targeted mainlevel
+ * (3-0 LSB, value between 0 and 11) and sublevel (7-4 LSB, value between 0 and 9):
+ * Example: rsiz = OPJ_PROFILE_IMF_2K | 0x0040 | 0x0005; (here main 5 and sublevel 4)
+ * */
+#define OPJ_PROFILE_NONE 0x0000 /** no profile, conform to 15444-1 */
+#define OPJ_PROFILE_0 0x0001 /** Profile 0 as described in 15444-1,Table A.45 */
+#define OPJ_PROFILE_1 0x0002 /** Profile 1 as described in 15444-1,Table A.45 */
+#define OPJ_PROFILE_PART2 0x8000 /** At least 1 extension defined in 15444-2 (Part-2) */
+#define OPJ_PROFILE_CINEMA_2K 0x0003 /** 2K cinema profile defined in 15444-1 AMD1 */
+#define OPJ_PROFILE_CINEMA_4K 0x0004 /** 4K cinema profile defined in 15444-1 AMD1 */
+#define OPJ_PROFILE_CINEMA_S2K 0x0005 /** Scalable 2K cinema profile defined in 15444-1 AMD2 */
+#define OPJ_PROFILE_CINEMA_S4K 0x0006 /** Scalable 4K cinema profile defined in 15444-1 AMD2 */
+#define OPJ_PROFILE_CINEMA_LTS 0x0007 /** Long term storage cinema profile defined in 15444-1 AMD2 */
+#define OPJ_PROFILE_BC_SINGLE 0x0100 /** Single Tile Broadcast profile defined in 15444-1 AMD3 */
+#define OPJ_PROFILE_BC_MULTI 0x0200 /** Multi Tile Broadcast profile defined in 15444-1 AMD3 */
+#define OPJ_PROFILE_BC_MULTI_R 0x0300 /** Multi Tile Reversible Broadcast profile defined in 15444-1 AMD3 */
+#define OPJ_PROFILE_IMF_2K 0x0400 /** 2K Single Tile Lossy IMF profile defined in 15444-1 AMD 8 */
+#define OPJ_PROFILE_IMF_4K 0x0401 /** 4K Single Tile Lossy IMF profile defined in 15444-1 AMD 8 */
+#define OPJ_PROFILE_IMF_8K 0x0402 /** 8K Single Tile Lossy IMF profile defined in 15444-1 AMD 8 */
+#define OPJ_PROFILE_IMF_2K_R 0x0403 /** 2K Single/Multi Tile Reversible IMF profile defined in 15444-1 AMD 8 */
+#define OPJ_PROFILE_IMF_4K_R 0x0800 /** 4K Single/Multi Tile Reversible IMF profile defined in 15444-1 AMD 8 */
+#define OPJ_PROFILE_IMF_8K_R 0x0801 /** 8K Single/Multi Tile Reversible IMF profile defined in 15444-1 AMD 8 */
+
+/**
+ * JPEG 2000 Part-2 extensions
+ * */
+#define OPJ_EXTENSION_NONE 0x0000 /** No Part-2 extension */
+#define OPJ_EXTENSION_MCT 0x0100 /** Custom MCT support */
+
+/**
+ * JPEG 2000 profile macros
+ * */
+#define OPJ_IS_CINEMA(v) (((v) >= OPJ_PROFILE_CINEMA_2K)&&((v) <= OPJ_PROFILE_CINEMA_S4K))
+#define OPJ_IS_STORAGE(v) ((v) == OPJ_PROFILE_CINEMA_LTS)
+#define OPJ_IS_BROADCAST(v) (((v) >= OPJ_PROFILE_BC_SINGLE)&&((v) <= ((OPJ_PROFILE_BC_MULTI_R) | (0x000b))))
+#define OPJ_IS_IMF(v) (((v) >= OPJ_PROFILE_IMF_2K)&&((v) <= ((OPJ_PROFILE_IMF_8K_R) | (0x009b))))
+#define OPJ_IS_PART2(v) ((v) & OPJ_PROFILE_PART2)
+
+/**
+ * JPEG 2000 codestream and component size limits in cinema profiles
+ * */
+#define OPJ_CINEMA_24_CS 1302083 /** Maximum codestream length for 24fps */
+#define OPJ_CINEMA_48_CS 651041 /** Maximum codestream length for 48fps */
+#define OPJ_CINEMA_24_COMP 1041666 /** Maximum size per color component for 2K & 4K @ 24fps */
+#define OPJ_CINEMA_48_COMP 520833 /** Maximum size per color component for 2K @ 48fps */
/*
==========================================================
enum definitions
==========================================================
*/
-/**
+
+/**
+ * DEPRECATED: use RSIZ, OPJ_PROFILE_* and OPJ_EXTENSION_* instead
* Rsiz Capabilities
* */
typedef enum RSIZ_CAPABILITIES {
- STD_RSIZ = 0, /** Standard JPEG2000 profile*/
- CINEMA2K = 3, /** Profile name for a 2K image*/
- CINEMA4K = 4, /** Profile name for a 4K image*/
- MCT = 0x8100
+ OPJ_STD_RSIZ = 0, /** Standard JPEG2000 profile*/
+ OPJ_CINEMA2K = 3, /** Profile name for a 2K image*/
+ OPJ_CINEMA4K = 4, /** Profile name for a 4K image*/
+ OPJ_MCT = 0x8100
} OPJ_RSIZ_CAPABILITIES;
-/**
+/**
+ * DEPRECATED: use RSIZ, OPJ_PROFILE_* and OPJ_EXTENSION_* instead
* Digital cinema operation mode
* */
typedef enum CINEMA_MODE {
- OFF = 0, /** Not Digital Cinema*/
- CINEMA2K_24 = 1, /** 2K Digital Cinema at 24 fps*/
- CINEMA2K_48 = 2, /** 2K Digital Cinema at 48 fps*/
- CINEMA4K_24 = 3 /** 4K Digital Cinema at 24 fps*/
+ OPJ_OFF = 0, /** Not Digital Cinema*/
+ OPJ_CINEMA2K_24 = 1, /** 2K Digital Cinema at 24 fps*/
+ OPJ_CINEMA2K_48 = 2, /** 2K Digital Cinema at 48 fps*/
+ OPJ_CINEMA4K_24 = 3 /** 4K Digital Cinema at 24 fps*/
}OPJ_CINEMA_MODE;
/**
* Progression order
* */
typedef enum PROG_ORDER {
- PROG_UNKNOWN = -1, /**< place-holder */
- LRCP = 0, /**< layer-resolution-component-precinct order */
- RLCP = 1, /**< resolution-layer-component-precinct order */
- RPCL = 2, /**< resolution-precinct-component-layer order */
- PCRL = 3, /**< precinct-component-resolution-layer order */
- CPRL = 4 /**< component-precinct-resolution-layer order */
+ OPJ_PROG_UNKNOWN = -1, /**< place-holder */
+ OPJ_LRCP = 0, /**< layer-resolution-component-precinct order */
+ OPJ_RLCP = 1, /**< resolution-layer-component-precinct order */
+ OPJ_RPCL = 2, /**< resolution-precinct-component-layer order */
+ OPJ_PCRL = 3, /**< precinct-component-resolution-layer order */
+ OPJ_CPRL = 4 /**< component-precinct-resolution-layer order */
} OPJ_PROG_ORDER;
/**
* Supported image color spaces
*/
typedef enum COLOR_SPACE {
- CLRSPC_UNKNOWN = -1, /**< not supported by the library */
- CLRSPC_UNSPECIFIED = 0, /**< not specified in the codestream */
- CLRSPC_SRGB = 1, /**< sRGB */
- CLRSPC_GRAY = 2, /**< grayscale */
- CLRSPC_SYCC = 3 /**< YUV */
+ OPJ_CLRSPC_UNKNOWN = -1, /**< not supported by the library */
+ OPJ_CLRSPC_UNSPECIFIED = 0, /**< not specified in the codestream */
+ OPJ_CLRSPC_SRGB = 1, /**< sRGB */
+ OPJ_CLRSPC_GRAY = 2, /**< grayscale */
+ OPJ_CLRSPC_SYCC = 3, /**< YUV */
+ OPJ_CLRSPC_EYCC = 4, /**< e-YCC */
+ OPJ_CLRSPC_CMYK = 5 /**< CMYK */
} OPJ_COLOR_SPACE;
/**
* Supported codec
*/
typedef enum CODEC_FORMAT {
- CODEC_UNKNOWN = -1, /**< place-holder */
- CODEC_J2K = 0, /**< JPEG-2000 codestream : read/write */
- CODEC_JPT = 1, /**< JPT-stream (JPEG 2000, JPIP) : read only */
- CODEC_JP2 = 2 /**< JPEG-2000 file format : read/write */
+ OPJ_CODEC_UNKNOWN = -1, /**< place-holder */
+ OPJ_CODEC_J2K = 0, /**< JPEG-2000 codestream : read/write */
+ OPJ_CODEC_JPT = 1, /**< JPT-stream (JPEG 2000, JPIP) : read only */
+ OPJ_CODEC_JP2 = 2, /**< JP2 file format : read/write */
+ OPJ_CODEC_JPP = 3, /**< JPP-stream (JPEG 2000, JPIP) : to be coded */
+ OPJ_CODEC_JPX = 4 /**< JPX file format (JPEG 2000 Part-2) : to be coded */
} OPJ_CODEC_FORMAT;
-/**
- * Limit decoding to certain portions of the codestream.
-*/
-typedef enum LIMIT_DECODING {
- NO_LIMITATION = 0, /**< No limitation for the decoding. The entire codestream will de decoded */
- LIMIT_TO_MAIN_HEADER = 1, /**< The decoding is limited to the Main Header */
- DECODE_ALL_BUT_PACKETS = 2 /**< Decode everything except the JPEG 2000 packets */
-} OPJ_LIMIT_DECODING;
-
/*
==========================================================
/**
* Callback function prototype for events
- * @param msg Event message
- * @param client_data
+ * @param msg Event message
+ * @param client_data Client object where will be return the event message
* */
typedef void (*opj_msg_callback) (const char *msg, void *client_data);
* */
typedef struct opj_cparameters {
/** size of tile: tile_size_on = false (not in argument) or = true (in argument) */
- opj_bool tile_size_on;
+ OPJ_BOOL tile_size_on;
/** XTOsiz */
int cp_tx0;
/** YTOsiz */
char *cp_comment;
/** csty : coding style */
int csty;
- /** progression order (default LRCP) */
+ /** progression order (default OPJ_LRCP) */
OPJ_PROG_ORDER prog_order;
/** progression order changes */
opj_poc_t POC[32];
/** number of progression order changes (POC), default to 0 */
- int numpocs;
+ OPJ_UINT32 numpocs;
/** number of layers */
int tcp_numlayers;
- /** rates of layers */
+ /** rates of layers - might be subsequently limited by the max_cs_size field */
float tcp_rates[100];
/** different psnr for successive layers */
float tcp_distoratio[100];
/* number of precinct size specifications */
int res_spec;
/** initial precinct width */
- int prcw_init[J2K_MAXRLVLS];
+ int prcw_init[OPJ_J2K_MAXRLVLS];
/** initial precinct height */
- int prch_init[J2K_MAXRLVLS];
+ int prch_init[OPJ_J2K_MAXRLVLS];
/**@name command line encoder parameters (not used inside the library) */
/*@{*/
int cod_format;
/*@}*/
-/* UniPG>> */
+/* UniPG>> */ /* NOT YET USED IN THE V2 VERSION OF OPENJPEG */
/**@name JPWL encoding parameters */
/*@{*/
/** enables writing of EPC in MH, thus activating JPWL */
- opj_bool jpwl_epc_on;
+ OPJ_BOOL jpwl_epc_on;
/** error protection method for MH (0,1,16,32,37-128) */
int jpwl_hprot_MH;
/** tile number of header protection specification (>=0) */
/*@}*/
/* <<UniPG */
- /** Digital Cinema compliance 0-not compliant, 1-compliant*/
- OPJ_CINEMA_MODE cp_cinema;
- /** Maximum rate for each component. If == 0, component size limitation is not considered */
+ /**
+ * DEPRECATED: use RSIZ, OPJ_PROFILE_* and MAX_COMP_SIZE instead
+ * Digital Cinema compliance 0-not compliant, 1-compliant
+ * */
+ OPJ_CINEMA_MODE cp_cinema;
+ /**
+ * Maximum size (in bytes) for each component.
+ * If == 0, component size limitation is not considered
+ * */
int max_comp_size;
- /** Profile name*/
- OPJ_RSIZ_CAPABILITIES cp_rsiz;
+ /**
+ * DEPRECATED: use RSIZ, OPJ_PROFILE_* and OPJ_EXTENSION_* instead
+ * Profile name
+ * */
+ OPJ_RSIZ_CAPABILITIES cp_rsiz;
/** Tile part generation*/
char tp_on;
/** Flag for Tile part generation*/
/** MCT (multiple component transform) */
char tcp_mct;
/** Enable JPIP indexing*/
- opj_bool jpip_on;
- /** Naive implementation of MCT restricted to a single reversible array based encoding without offset concerning all the components. */
+ OPJ_BOOL jpip_on;
+ /** Naive implementation of MCT restricted to a single reversible array based
+ encoding without offset concerning all the components. */
void * mct_data;
-} opj_cparameters_t;
+ /**
+ * Maximum size (in bytes) for the whole codestream.
+ * If == 0, codestream size limitation is not considered
+ * If it does not comply with tcp_rates, max_cs_size prevails
+ * and a warning is issued.
+ * */
+ int max_cs_size;
+ /** RSIZ value
+ To be used to combine OPJ_PROFILE_*, OPJ_EXTENSION_* and (sub)levels values. */
+ OPJ_UINT16 rsiz;
+} opj_cparameters_t;
#define OPJ_DPARAMETERS_IGNORE_PCLR_CMAP_CDEF_FLAG 0x0001
if != 0, then original dimension divided by 2^(reduce);
if == 0 or not used, image is decoded to the full resolution
*/
- int cp_reduce;
+ OPJ_UINT32 cp_reduce;
/**
Set the maximum number of quality layers to decode.
If there are less quality layers than the specified number, all the quality layers are decoded.
if != 0, then only the first "layer" layers are decoded;
if == 0 or not used, all the quality layers are decoded
*/
- int cp_layer;
+ OPJ_UINT32 cp_layer;
/**@name command line decoder parameters (not used inside the library) */
/*@{*/
/** Decoding area bottom boundary */
OPJ_UINT32 DA_y1;
/** Verbose mode */
- opj_bool m_verbose;
+ OPJ_BOOL m_verbose;
/** tile number ot the decoded tile*/
OPJ_UINT32 tile_index;
/*@}*/
-/* UniPG>> */
+/* UniPG>> */ /* NOT YET USED IN THE V2 VERSION OF OPENJPEG */
/**@name JPWL decoding parameters */
/*@{*/
/** activates the JPWL correction capabilities */
- opj_bool jpwl_correct;
+ OPJ_BOOL jpwl_correct;
/** expected number of components */
int jpwl_exp_comps;
/** maximum number of tiles */
/*@}*/
/* <<UniPG */
- /**
- Specify whether the decoding should be done on the entire codestream, or be limited to the main header
- Limiting the decoding to the main header makes it possible to extract the characteristics of the codestream
- if == NO_LIMITATION, the entire codestream is decoded;
- if == LIMIT_TO_MAIN_HEADER, only the main header is decoded;
- */
- OPJ_LIMIT_DECODING cp_limit_decoding;
-
unsigned int flags;
-} opj_dparameters_t;
-
+} opj_dparameters_t;
/**
==========================================================
*/
-/*
+/**
* Stream open flags.
- */
+ * */
/** The stream was opened for reading. */
-#define OPJ_STREAM_READ 0x0001
+#define OPJ_STREAM_READ OPJ_TRUE
/** The stream was opened for writing. */
-#define OPJ_STREAM_WRITE 0x0002
-
-
-
+#define OPJ_STREAM_WRITE OPJ_FALSE
/*
- * FIXME DOC
+ * Callback function prototype for read function
*/
typedef OPJ_SIZE_T (* opj_stream_read_fn) (void * p_buffer, OPJ_SIZE_T p_nb_bytes, void * p_user_data) ;
+
+/*
+ * Callback function prototype for write function
+ */
typedef OPJ_SIZE_T (* opj_stream_write_fn) (void * p_buffer, OPJ_SIZE_T p_nb_bytes, void * p_user_data) ;
+
+/*
+ * Callback function prototype for skip function
+ */
typedef OPJ_OFF_T (* opj_stream_skip_fn) (OPJ_OFF_T p_nb_bytes, void * p_user_data) ;
-typedef opj_bool (* opj_stream_seek_fn) (OPJ_OFF_T p_nb_bytes, void * p_user_data) ;
+
+/*
+ * Callback function prototype for seek function
+ */
+typedef OPJ_BOOL (* opj_stream_seek_fn) (OPJ_OFF_T p_nb_bytes, void * p_user_data) ;
+
+/*
+ * Callback function prototype for free user data function
+ */
+typedef void (* opj_stream_free_user_data_fn) (void * p_user_data) ;
/*
* JPEG2000 Stream.
OPJ_UINT32 factor;
/** image component data */
OPJ_INT32 *data;
+ /** alpha channel */
+ OPJ_UINT16 alpha;
} opj_image_comp_t;
/**
Information on the JPEG 2000 codestream
==========================================================
*/
+/* QUITE EXPERIMENTAL FOR THE MOMENT */
/**
* Index structure : Information concerning a packet inside tile
} opj_codestream_info_t;
/* <----------------------------------------------------------- */
-/* new output managment of the codestream information and index */
+/* new output management of the codestream information and index */
/**
* Tile-component coding parameters information
/** quantisation style */
OPJ_UINT32 qntsty;
/** stepsizes used for quantization */
- OPJ_UINT32 stepsizes_mant[J2K_MAXBANDS];
+ OPJ_UINT32 stepsizes_mant[OPJ_J2K_MAXBANDS];
/** stepsizes used for quantization */
- OPJ_UINT32 stepsizes_expn[J2K_MAXBANDS];
+ OPJ_UINT32 stepsizes_expn[OPJ_J2K_MAXBANDS];
/** number of guard bits */
OPJ_UINT32 numgbits;
/** Region Of Interest shift */
OPJ_INT32 roishift;
/** precinct width */
- OPJ_UINT32 prcw[J2K_MAXRLVLS];
+ OPJ_UINT32 prcw[OPJ_J2K_MAXRLVLS];
/** precinct height */
- OPJ_UINT32 prch[J2K_MAXRLVLS];
+ OPJ_UINT32 prch[OPJ_J2K_MAXRLVLS];
}
opj_tccp_info_t;
/** information concerning tile parts */
opj_tp_index_t *tp_index;
- /* UniPG>> */
+ /* UniPG>> */ /* NOT USED FOR THE MOMENT IN THE V2 VERSION */
/** number of markers */
OPJ_UINT32 marknum;
/** list of markers */
/** codestream's size */
OPJ_UINT64 codestream_size;
-/* UniPG>> */
+/* UniPG>> */ /* NOT USED FOR THE MOMENT IN THE V2 VERSION */
/** number of markers */
OPJ_UINT32 marknum;
/** list of markers */
/**
* Info structure of the JP2 file
- * FIXME
+ * EXPERIMENTAL FOR THE MOMENT
*/
typedef struct opj_jp2_metadata {
/** */
/**
* Index structure of the JP2 file
- * FIXME
+ * EXPERIMENTAL FOR THE MOMENT
*/
typedef struct opj_jp2_index {
/** */
==========================================================
*/
+/* Get the version of the openjpeg library*/
OPJ_API const char * OPJ_CALLCONV opj_version(void);
/*
/**
* Create an image
- * @param numcmpts number of components
- * @param cmptparms components parameters
- * @param clrspc image color space
- * @return returns a new image structure if successful, returns NULL otherwise
+ *
+ * @param numcmpts number of components
+ * @param cmptparms components parameters
+ * @param clrspc image color space
+ * @return returns a new image structure if successful, returns NULL otherwise
* */
OPJ_API opj_image_t* OPJ_CALLCONV opj_image_create(OPJ_UINT32 numcmpts, opj_image_cmptparm_t *cmptparms, OPJ_COLOR_SPACE clrspc);
/**
* Deallocate any resources associated with an image
- * @param image image to be destroyed
+ *
+ * @param image image to be destroyed
*/
OPJ_API void OPJ_CALLCONV opj_image_destroy(opj_image_t *image);
-
/**
* Creates an image without allocating memory for the image (used in the new version of the library).
*
- * @param numcmpts the number of components
- * @param cmptparms the components parameters
- * @param clrspc the image color space
+ * @param numcmpts the number of components
+ * @param cmptparms the components parameters
+ * @param clrspc the image color space
*
* @return a new image structure if successful, NULL otherwise.
*/
OPJ_API opj_image_t* OPJ_CALLCONV opj_image_tile_create(OPJ_UINT32 numcmpts, opj_image_cmptparm_t *cmptparms, OPJ_COLOR_SPACE clrspc);
-
/*
==========================================================
stream functions definitions
*
* @return a stream object.
*/
-OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_default_create(opj_bool p_is_input);
+OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_default_create(OPJ_BOOL p_is_input);
/**
* Creates an abstract stream. This function does nothing except allocating memory and initializing the abstract stream.
*
* @return a stream object.
*/
-OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create(OPJ_SIZE_T p_buffer_size, opj_bool p_is_input);
+OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create(OPJ_SIZE_T p_buffer_size, OPJ_BOOL p_is_input);
/**
* Destroys a stream created by opj_create_stream. This function does NOT close the abstract stream. If needed the user must
* @param p_stream the stream to destroy.
*/
OPJ_API void OPJ_CALLCONV opj_stream_destroy(opj_stream_t* p_stream);
-
+
/**
* Sets the given function to be used as a read function.
* @param p_stream the stream to modify
* Sets the given data to be used as a user data for the stream.
* @param p_stream the stream to modify
* @param p_data the data to set.
+ * @param p_function the function to free p_data when opj_stream_destroy() is called.
*/
-OPJ_API void OPJ_CALLCONV opj_stream_set_user_data (opj_stream_t* p_stream, void * p_data);
+OPJ_API void OPJ_CALLCONV opj_stream_set_user_data (opj_stream_t* p_stream, void * p_data, opj_stream_free_user_data_fn p_function);
/**
* Sets the length of the user data for the stream.
OPJ_API void OPJ_CALLCONV opj_stream_set_user_data_length(opj_stream_t* p_stream, OPJ_UINT64 data_length);
/**
- * Helper function.
- * Sets the stream to be a file stream. The FILE must have been open previously.
- * @param p_file the file stream to operate on
- * @param p_is_read_stream whether the stream is a read stream (true) or not (false)
+ * Create a stream from a file identified with its filename with default parameters (helper function)
+ * @param fname the filename of the file to stream
+ * @param p_is_read_stream whether the stream is a read stream (true) or not (false)
*/
-OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create_default_file_stream (FILE * p_file, opj_bool p_is_read_stream);
-
-/**
- * FIXME DOC
- * @param p_file the file stream to operate on
- * @param p_buffer_size FIXME DOC
- * @param p_is_read_stream FIXME DOC
+OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create_default_file_stream (const char *fname, OPJ_BOOL p_is_read_stream);
+
+/** Create a stream from a file identified with its filename with a specific buffer size
+ * @param fname the filename of the file to stream
+ * @param p_buffer_size size of the chunk used to stream
+ * @param p_is_read_stream whether the stream is a read stream (true) or not (false)
*/
-OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create_file_stream (FILE * p_file, OPJ_SIZE_T p_buffer_size, opj_bool p_is_read_stream);
-
-/* -----------> */
-
+OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create_file_stream (const char *fname,
+ OPJ_SIZE_T p_buffer_size,
+ OPJ_BOOL p_is_read_stream);
+
/*
==========================================================
event manager functions definitions
* Set the info handler use by openjpeg.
* @param p_codec the codec previously initialise
* @param p_callback the callback function which will be used
- * @param p_user_data FIXME DOC
+ * @param p_user_data client object where will be returned the message
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_set_info_handler(opj_codec_t * p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_info_handler(opj_codec_t * p_codec,
opj_msg_callback p_callback,
void * p_user_data);
/**
* Set the warning handler use by openjpeg.
* @param p_codec the codec previously initialise
* @param p_callback the callback function which will be used
- * @param p_user_data FIXME DOC
+ * @param p_user_data client object where will be returned the message
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_set_warning_handler(opj_codec_t * p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_warning_handler(opj_codec_t * p_codec,
opj_msg_callback p_callback,
void * p_user_data);
/**
* Set the error handler use by openjpeg.
* @param p_codec the codec previously initialise
* @param p_callback the callback function which will be used
- * @param p_user_data FIXME DOC
+ * @param p_user_data client object where will be returned the message
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_set_error_handler(opj_codec_t * p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_error_handler(opj_codec_t * p_codec,
opj_msg_callback p_callback,
void * p_user_data);
* @param p_codec the JPEG2000 codec to read.
* @param p_stream the JPEG2000 stream.
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_end_decompress ( opj_codec_t *p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_end_decompress ( opj_codec_t *p_codec,
opj_stream_t *p_stream);
*
* @return true if the decoder is correctly set
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_setup_decoder(opj_codec_t *p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_setup_decoder(opj_codec_t *p_codec,
opj_dparameters_t *parameters );
/**
*
* @return true if the main header of the codestream and the JP2 header is correctly read.
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_read_header ( opj_stream_t *p_stream,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_read_header ( opj_stream_t *p_stream,
opj_codec_t *p_codec,
opj_image_t **p_image);
* Sets the given area to be decoded. This function should be called right after opj_read_header and before any tile header reading.
*
* @param p_codec the jpeg2000 codec.
- * @param p_image FIXME DOC
+ * @param p_image the decoded image previously setted by opj_read_header
* @param p_start_x the left position of the rectangle to decode (in image coordinates).
* @param p_end_x the right position of the rectangle to decode (in image coordinates).
* @param p_start_y the up position of the rectangle to decode (in image coordinates).
*
* @return true if the area could be set.
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_set_decode_area( opj_codec_t *p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_decode_area( opj_codec_t *p_codec,
opj_image_t* p_image,
OPJ_INT32 p_start_x, OPJ_INT32 p_start_y,
OPJ_INT32 p_end_x, OPJ_INT32 p_end_y );
/**
* Decode an image from a JPEG-2000 codestream
+ *
* @param p_decompressor decompressor handle
* @param p_stream Input buffer stream
* @param p_image the decoded image
* @return true if success, otherwise false
* */
-OPJ_API opj_bool OPJ_CALLCONV opj_decode( opj_codec_t *p_decompressor,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_decode( opj_codec_t *p_decompressor,
opj_stream_t *p_stream,
opj_image_t *p_image);
/**
* Get the decoded tile from the codec
+ *
* @param p_codec the jpeg2000 codec.
* @param p_stream input streamm
* @param p_image output image
*
* @return true if success, otherwise false
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_get_decoded_tile( opj_codec_t *p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_get_decoded_tile( opj_codec_t *p_codec,
opj_stream_t *p_stream,
opj_image_t *p_image,
OPJ_UINT32 tile_index);
*
* @return true if success, otherwise false
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_set_decoded_resolution_factor(opj_codec_t *p_codec, OPJ_UINT32 res_factor);
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_decoded_resolution_factor(opj_codec_t *p_codec, OPJ_UINT32 res_factor);
/**
* Writes a tile with the given data.
*
- * @param p_codec the jpeg2000 codec.
+ * @param p_codec the jpeg2000 codec.
* @param p_tile_index the index of the tile to write. At the moment, the tiles must be written from 0 to n-1 in sequence.
* @param p_data pointer to the data to write. Data is arranged in sequence, data_comp0, then data_comp1, then ... NO INTERLEAVING should be set.
- * @param p_data_size this value os used to make sure the data being written is correct. The size must be equal to the sum for each component of tile_width * tile_height * component_size. component_size can be 1,2 or 4 bytes, depending on the precision of the given component.
+ * @param p_data_size this value os used to make sure the data being written is correct. The size must be equal to the sum for each component of
+ * tile_width * tile_height * component_size. component_size can be 1,2 or 4 bytes, depending on the precision of the given component.
* @param p_stream the stream to write data to.
*
* @return true if the data could be written.
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_write_tile ( opj_codec_t *p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_write_tile ( opj_codec_t *p_codec,
OPJ_UINT32 p_tile_index,
OPJ_BYTE * p_data,
OPJ_UINT32 p_data_size,
opj_stream_t *p_stream );
/**
- * Reads a tile header. This function is compulsory and allows one to know the size of the tile thta will be decoded.
+ * Reads a tile header. This function is compulsory and allows one to know the size of the tile that will be decoded.
* The user may need to refer to the image got by opj_read_header to understand the size being taken by the tile.
*
* @param p_codec the jpeg2000 codec.
* @return true if the tile header could be decoded. In case the decoding should end, the returned value is still true.
* returning false may be the result of a shortage of memory or an internal error.
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_read_tile_header( opj_codec_t *p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_read_tile_header( opj_codec_t *p_codec,
opj_stream_t * p_stream,
OPJ_UINT32 * p_tile_index,
OPJ_UINT32 * p_data_size,
OPJ_INT32 * p_tile_x0, OPJ_INT32 * p_tile_y0,
OPJ_INT32 * p_tile_x1, OPJ_INT32 * p_tile_y1,
OPJ_UINT32 * p_nb_comps,
- opj_bool * p_should_go_on );
+ OPJ_BOOL * p_should_go_on );
/**
* Reads a tile data. This function is compulsory and allows one to decode tile data. opj_read_tile_header should be called before.
*
* @return true if the data could be decoded.
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_decode_tile_data( opj_codec_t *p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_decode_tile_data( opj_codec_t *p_codec,
OPJ_UINT32 p_tile_index,
OPJ_BYTE * p_data,
OPJ_UINT32 p_data_size,
* @param parameters Compression parameters
* @param image Input filled image
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_setup_encoder(opj_codec_t *p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_setup_encoder(opj_codec_t *p_codec,
opj_cparameters_t *parameters,
opj_image_t *image);
/**
+ * Start to compress the current image.
+ * @param p_codec Compressor handle
+ * @param image Input filled image
+ * @param p_stream Input stgream
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_start_compress ( opj_codec_t *p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_start_compress ( opj_codec_t *p_codec,
opj_image_t * p_image,
- opj_stream_t *p_cio);
+ opj_stream_t *p_stream);
/**
+ * End to compress the current image.
+ * @param p_codec Compressor handle
+ * @param p_stream Input stgream
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_end_compress (opj_codec_t *p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_end_compress (opj_codec_t *p_codec,
opj_stream_t *p_stream);
/**
*
* @return Returns true if successful, returns false otherwise
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_encode(opj_codec_t *p_codec,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_encode(opj_codec_t *p_codec,
opj_stream_t *p_stream);
-
+/*
+==========================================================
+ codec output functions definitions
+==========================================================
+*/
+/* EXPERIMENTAL FUNCTIONS FOR NOW, USED ONLY IN J2K_DUMP*/
/**
Destroy Codestream information after compression or decompression
OPJ_API void OPJ_CALLCONV opj_destroy_cstr_info(opj_codestream_info_v2_t **cstr_info);
-
-/*
-==========================================================
- codec output functions definitions
-==========================================================
-*/
-
/**
* Dump the codec information into the output stream
*
/*
==========================================================
- new functions
+ MCT functions
==========================================================
*/
*
* @return true if the parameters could be set.
*/
-OPJ_API opj_bool OPJ_CALLCONV opj_set_MCT( opj_cparameters_t *parameters,
+OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_MCT( opj_cparameters_t *parameters,
OPJ_FLOAT32 * pEncodingMatrix,
OPJ_INT32 * p_dc_shift,
OPJ_UINT32 pNbComp);