* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
-#ifndef __T1_H
-#define __T1_H
+#ifndef OPJ_T1_H
+#define OPJ_T1_H
/**
@file t1.h
@brief Implementation of the tier-1 coding (coding of code-block coefficients) (T1)
/* ----------------------------------------------------------------------- */
#define T1_NMSEDEC_BITS 7
-/* CAUTION: the value of those constants must not be changed, otherwise the */
-/* optimization of opj_t1_updateflags() will break! */
-/* BEGINNING of flags that apply to opj_flag_t */
-#define T1_SIG_NE 0x0001U /**< Context orientation : North-East direction */
-#define T1_SIG_SE 0x0002U /**< Context orientation : South-East direction */
-#define T1_SIG_SW 0x0004U /**< Context orientation : South-West direction */
-#define T1_SIG_NW 0x0008U /**< Context orientation : North-West direction */
-#define T1_SIG_N 0x0010U /**< Context orientation : North direction */
-#define T1_SIG_E 0x0020U /**< Context orientation : East direction */
-#define T1_SIG_S 0x0040U /**< Context orientation : South direction */
-#define T1_SIG_W 0x0080U /**< Context orientation : West direction */
-#define T1_SIG_OTH (T1_SIG_N|T1_SIG_NE|T1_SIG_E|T1_SIG_SE|T1_SIG_S|T1_SIG_SW|T1_SIG_W|T1_SIG_NW)
-#define T1_SIG_PRIM (T1_SIG_N|T1_SIG_E|T1_SIG_S|T1_SIG_W)
-
-#define T1_SGN_N 0x0100U
-#define T1_SGN_E 0x0200U
-#define T1_SGN_S 0x0400U
-#define T1_SGN_W 0x0800U
-#define T1_SGN (T1_SGN_N|T1_SGN_E|T1_SGN_S|T1_SGN_W)
-
-#ifdef CONSISTENCY_CHECK
-#define T1_SIG 0x1000U /**< No longer used by decoder */
-#define T1_VISIT 0x4000U /**< No longer used by decoder */
-#endif
-
-/* END of flags that apply to opj_flag_t */
-
#define T1_NUMCTXS_ZC 9
#define T1_NUMCTXS_SC 5
#define T1_NUMCTXS_MAG 3
#define T1_TYPE_MQ 0 /**< Normal coding using entropy coder */
#define T1_TYPE_RAW 1 /**< No encoding the information is store under raw format in codestream (mode switch RAW)*/
-/* Those flags are used by opj_colflag_t */
-#define T1_COLFLAG_RBS 4U /* RBS = Row Bit Shift */
-#define T1_COLFLAG_SIG_OTHER_ROW_0 (1U << 0U) /**< This sample has at least one significant neighbour */
-#define T1_COLFLAG_SIG_ROW_0 (1U << 1U) /**< This sample is significant */
-#define T1_COLFLAG_VISIT_ROW_0 (1U << 2U) /**< This sample has been visited */
-#define T1_COLFLAG_REFINE_ROW_0 (1U << 3U) /**< This sample has been refined */
-#define T1_COLFLAG_SIG_OTHER_ROW_1 (T1_COLFLAG_SIG_OTHER_ROW_0 << (1U * T1_COLFLAG_RBS))
-#define T1_COLFLAG_SIG_ROW_1 (T1_COLFLAG_SIG_ROW_0 << (1U * T1_COLFLAG_RBS))
-#define T1_COLFLAG_VISIT_ROW_1 (T1_COLFLAG_VISIT_ROW_0 << (1U * T1_COLFLAG_RBS))
-#define T1_COLFLAG_REFINE_ROW_1 (T1_COLFLAG_REFINE_ROW_0 << (1U * T1_COLFLAG_RBS))
-#define T1_COLFLAG_SIG_OTHER_ROW_2 (T1_COLFLAG_SIG_OTHER_ROW_0 << (2U * T1_COLFLAG_RBS))
-#define T1_COLFLAG_SIG_ROW_2 (T1_COLFLAG_SIG_ROW_0 << (2U * T1_COLFLAG_RBS))
-#define T1_COLFLAG_VISIT_ROW_2 (T1_COLFLAG_VISIT_ROW_0 << (2U * T1_COLFLAG_RBS))
-#define T1_COLFLAG_REFINE_ROW_2 (T1_COLFLAG_REFINE_ROW_0 << (2U * T1_COLFLAG_RBS))
-#define T1_COLFLAG_SIG_OTHER_ROW_3 (T1_COLFLAG_SIG_OTHER_ROW_0 << (3U * T1_COLFLAG_RBS))
-#define T1_COLFLAG_SIG_ROW_3 (T1_COLFLAG_SIG_ROW_0 << (3U * T1_COLFLAG_RBS))
-#define T1_COLFLAG_VISIT_ROW_3 (T1_COLFLAG_VISIT_ROW_0 << (3U * T1_COLFLAG_RBS))
-#define T1_COLFLAG_REFINE_ROW_3 (T1_COLFLAG_REFINE_ROW_0 << (3U * T1_COLFLAG_RBS))
-
-
-/* BEGINNING of flags that apply to opj_flag_enc_t */
+/* BEGINNING of flags that apply to opj_flag_t */
/** We hold the state of individual data points for the T1 encoder using
* a single 32-bit flags word to hold the state of 4 data points. This corresponds
* to the 4-point-high columns that the data is processed in.
*
- * These #defines declare the layout of a 32-bit flags word.
+ * These \#defines declare the layout of a 32-bit flags word.
*
* This is currently done for encoding only.
* The values must NOT be changed, otherwise this is going to break a lot of
#define T1_MU_3 (1U << 29)
#define T1_PI_3 (1U << 30)
#define T1_CHI_5 (1U << 31)
+#define T1_CHI_5_I 31
/** As an example, the bits T1_SIGMA_3, T1_SIGMA_4 and T1_SIGMA_5
* indicate the significance state of the west neighbour of data point zero
* word right by 3 bits and look at the same bit positions to see the
* values for data point 1.
*
- * The #defines below help a bit with this; say you have a flags word
+ * The \#defines below help a bit with this; say you have a flags word
* f, you can do things like
*
* (f & T1_SIGMA_THIS)
#define T1_LUT_SIG_E (1U << 5)
#define T1_LUT_SGN_S (1U << 6)
#define T1_LUT_SIG_S (1U << 7)
-/* END of flags that apply to opj_flag_enc_t */
+/* END of flags that apply to opj_flag_t */
/* ----------------------------------------------------------------------- */
-typedef OPJ_UINT16 opj_flag_t;
-
/** Flags for 4 consecutive rows of a column */
-typedef OPJ_UINT16 opj_colflag_t;
-
-typedef OPJ_UINT32 opj_flag_enc_t;
+typedef OPJ_UINT32 opj_flag_t;
/**
Tier-1 coding (coding of code-block coefficients)
typedef struct opj_t1 {
/** MQC component */
- opj_mqc_t *mqc;
- /** RAW component */
- opj_raw_t *raw;
+ opj_mqc_t mqc;
OPJ_INT32 *data;
- /** Flags used by decoder */
- opj_flag_t *flags;
- /** Addition flag array such that colflags[1+0] is for state of col=0,row=0..3,
- colflags[1+1] for col=1, row=0..3, colflags[1+flags_stride] for col=0,row=4..7, ...
+ /** Flags used by decoder and encoder.
+ * Such that flags[1+0] is for state of col=0,row=0..3,
+ flags[1+1] for col=1, row=0..3, flags[1+flags_stride] for col=0,row=4..7, ...
This array avoids too much cache trashing when processing by 4 vertical samples
as done in the various decoding steps. */
- opj_colflag_t* colflags;
- /** Flags used by encoder */
- opj_flag_enc_t *enc_flags;
+ opj_flag_t *flags;
+
OPJ_UINT32 w;
OPJ_UINT32 h;
OPJ_UINT32 datasize;
OPJ_UINT32 flagssize;
- OPJ_UINT32 flags_stride;
- OPJ_UINT32 colflags_size;
OPJ_UINT32 data_stride;
OPJ_BOOL encoder;
-} opj_t1_t;
-#define MACRO_t1_flags(x,y) t1->flags[((x)*(t1->flags_stride))+(y)]
+ /* Thre 3 variables below are only used by the decoder */
+ /* set to TRUE in multithreaded context */
+ OPJ_BOOL mustuse_cblkdatabuffer;
+ /* Temporary buffer to concatenate all chunks of a codebock */
+ OPJ_BYTE *cblkdatabuffer;
+ /* Maximum size available in cblkdatabuffer */
+ OPJ_UINT32 cblkdatabuffersize;
+} opj_t1_t;
/** @name Exported functions */
/*@{*/
/**
Decode the code-blocks of a tile
-@param t1 T1 handle
+@param tcd TCD handle
+@param pret Pointer to return value
@param tilec The tile to decode
@param tccp Tile coding parameters
+@param p_manager the event manager
+@param p_manager_mutex mutex for the event manager
+@param check_pterm whether PTERM correct termination should be checked
*/
-void opj_t1_decode_cblks(opj_thread_pool_t* tp,
+void opj_t1_decode_cblks(opj_tcd_t* tcd,
volatile OPJ_BOOL* pret,
opj_tcd_tilecomp_t* tilec,
- opj_tccp_t* tccp);
+ opj_tccp_t* tccp,
+ opj_event_mgr_t *p_manager,
+ opj_mutex_t* p_manager_mutex,
+ OPJ_BOOL check_pterm);
/*@}*/
-#endif /* __T1_H */
+#endif /* OPJ_T1_H */