#include "tooltips.h"
#include "ui_config.h"
-#include "i18n.h"
+#include "pbd/i18n.h"
using namespace std;
using namespace ARDOUR;
set_latency_label ();
smaller_hbox->pack_start (latency_button, false, false, 4);
+ smaller_hbox->pack_start (pin_management_button, false, false, 4);
smaller_hbox->pack_start (_preset_combo, false, false);
smaller_hbox->pack_start (_preset_modified, false, false);
smaller_hbox->pack_start (add_button, false, false);
prefheight = 0;
build ();
+
+ /* Listen for property changes that are not notified normally because
+ * AutomationControl has only support for numeric values currently.
+ * The only case is Variant::PATH for now */
+ plugin->PropertyChanged.connect(*this, invalidator(*this),
+ boost::bind(&GenericPluginUI::path_property_changed, this, _1, _2),
+ gui_context());
+
main_contents.show ();
}
}
control_uis.push_back(cui);
- input_controls_with_automation.push_back (cui);
}
}
automation_play_all_button.signal_clicked.connect(sigc::bind (sigc::mem_fun (*this, &GenericPluginUI::set_all_automation), ARDOUR::Play));
automation_write_all_button.signal_clicked.connect(sigc::bind (sigc::mem_fun (*this, &GenericPluginUI::set_all_automation), ARDOUR::Write));
automation_touch_all_button.signal_clicked.connect(sigc::bind (sigc::mem_fun (*this, &GenericPluginUI::set_all_automation), ARDOUR::Touch));
+
+ /* XXX This is a workaround for AutomationControl not knowing about preset loads */
+ plugin->PresetLoaded.connect (*this, invalidator (*this), boost::bind (&GenericPluginUI::update_input_displays, this), gui_context ());
}
, meterinfo (0)
, knobtable (0)
{
- automate_button.set_name ("PluginAutomateButton");
+ automate_button.set_name ("plugin automation state button");
set_tooltip (automate_button, _("Automation control"));
/* XXX translators: use a string here that will be at least as long
below). be sure to include a descender.
*/
- set_size_request_to_display_given_text (automate_button, _("Mgnual"), 12, 6);
+ automate_button.set_sizing_text(_("Mgnual"));
ignore_change = false;
update_pending = false;
// don't lock to avoid deadlock because we're triggered by
// AutomationControl::Changed() while the automation lock is taken
+ AutoState state = insert->get_parameter_automation_state (cui->parameter());
+
+ cui->automate_button.set_active((state != ARDOUR::Off));
+
if (cui->knobtable) {
cui->automate_button.set_text (
- GainMeterBase::astate_string (
- insert->get_parameter_automation_state (cui->parameter()))
- );
+ GainMeterBase::astate_string (state));
return;
}
- switch (insert->get_parameter_automation_state (cui->parameter()) & (ARDOUR::Off|Play|Touch|Write)) {
+ switch (state & (ARDOUR::Off|Play|Touch|Write)) {
case ARDOUR::Off:
cui->automate_button.set_text (S_("Automation|Manual"));
break;
if (is_input) {
- /* See if there any named values for our input value */
- control_ui->scale_points = desc.scale_points;
-
- /* If this parameter is an integer, work out the number of distinct values
- it can take on (assuming that lower and upper values are allowed).
- */
- int const steps = desc.integer_step ? (desc.upper - desc.lower + 1) / desc.step : 0;
-
- if (control_ui->scale_points && ((steps && int (control_ui->scale_points->size()) == steps) || desc.enumeration)) {
-
- /* Either:
- * a) There is a label for each possible value of this input, or
- * b) This port is marked as being an enumeration.
- */
-
- std::vector<std::string> labels;
- for (
- ARDOUR::ScalePoints::const_iterator i = control_ui->scale_points->begin();
- i != control_ui->scale_points->end();
- ++i) {
-
- labels.push_back(i->first);
- }
-
- // TODO use ArdourDropDown
- control_ui->combo = new Gtk::ComboBoxText();
- set_popdown_strings(*control_ui->combo, labels);
- control_ui->combo->signal_changed().connect(
- sigc::bind (sigc::mem_fun(*this, &GenericPluginUI::control_combo_changed),
- control_ui));
- mcontrol->Changed.connect(control_connections, invalidator(*this),
- boost::bind(&GenericPluginUI::ui_parameter_changed,
- this, control_ui),
- gui_context());
-
- if (use_knob) {
- control_ui->knobtable = manage (new Table());
- control_ui->pack_start(*control_ui->knobtable, true, false);
- control_ui->knobtable->attach (control_ui->label, 0, 1, 0, 1);
- control_ui->knobtable->attach (*control_ui->combo, 0, 1, 1, 2);
- } else {
- control_ui->pack_start(control_ui->label, true, true);
- control_ui->pack_start(*control_ui->combo, false, true);
- }
-
- update_control_display(control_ui);
-
- return control_ui;
- }
-
if (desc.datatype == Variant::PATH) {
+ /* We shouldn't get that type for input ports */
+ assert(param.type() == PluginPropertyAutomation);
+
/* Build a file selector button */
// Create/add controller
control_ui->pack_start (*control_ui->file_button, true, true);
}
- // Connect signals (TODO: do this via the Control)
+ // Monitor changes from the user.
control_ui->file_button->signal_file_set().connect(
- sigc::bind(sigc::mem_fun(*this, &GenericPluginUI::set_property),
+ sigc::bind(sigc::mem_fun(*this, &GenericPluginUI::set_path_property),
desc, control_ui->file_button));
- plugin->PropertyChanged.connect(*this, invalidator(*this),
- boost::bind(&GenericPluginUI::property_changed, this, _1, _2),
- gui_context());
- _property_controls.insert(std::make_pair(desc.key, control_ui->file_button));
- control_ui->file_button = control_ui->file_button;
+ /* Add the filebutton control to a map so that we can update it when
+ * the corresponding property changes. This doesn't go through the usual
+ * AutomationControls, because they don't support non-numeric values. */
+ _filepath_controls.insert(std::make_pair(desc.key, control_ui->file_button));
return control_ui;
}
- /* create the controller */
+ assert(mcontrol);
- /* XXX memory leak: SliderController not destroyed by ControlUI
- * destructor, and manage() reports object hierarchy
- * ambiguity.
- */
- if (mcontrol) {
- control_ui->controller = AutomationController::create(insert, mcontrol->parameter(), desc, mcontrol, use_knob);
- }
+ /* See if there any named values for our input value */
+ control_ui->scale_points = desc.scale_points;
- /* XXX this code is not right yet, because it doesn't handle
- the absence of bounds in any sensible fashion.
+ /* If this parameter is an integer, work out the number of distinct values
+ it can take on (assuming that lower and upper values are allowed).
*/
+ int const steps = desc.integer_step ? (desc.upper - desc.lower + 1) / desc.step : 0;
- Adjustment* adj = control_ui->controller->adjustment();
+ if (control_ui->scale_points && ((steps && int (control_ui->scale_points->size()) == steps) || desc.enumeration)) {
- if (desc.integer_step && !desc.toggled) {
- control_ui->clickbox = new ClickBox (adj, "PluginUIClickBox", true);
- Gtkmm2ext::set_size_request_to_display_given_text (*control_ui->clickbox, "g9999999", 2, 2);
- if (desc.unit == ParameterDescriptor::MIDI_NOTE) {
- control_ui->clickbox->set_printer (sigc::bind (sigc::mem_fun (*this, &GenericPluginUI::midinote_printer), control_ui));
- } else {
- control_ui->clickbox->set_printer (sigc::bind (sigc::mem_fun (*this, &GenericPluginUI::integer_printer), control_ui));
+ /* Either:
+ * a) There is a label for each possible value of this input, or
+ * b) This port is marked as being an enumeration.
+ */
+
+ control_ui->combo = new ArdourDropdown();
+ for (ARDOUR::ScalePoints::const_iterator i = control_ui->scale_points->begin();
+ i != control_ui->scale_points->end();
+ ++i) {
+ control_ui->combo->AddMenuElem(Menu_Helpers::MenuElem(
+ i->first,
+ sigc::bind(sigc::mem_fun(*this, &GenericPluginUI::control_combo_changed),
+ control_ui,
+ i->second)));
}
- } else if (desc.toggled) {
- control_ui->controller->set_size_request (req.height, req.height);
- } else if (use_knob) {
- control_ui->controller->set_size_request (req.height * 1.5, req.height * 1.5);
+
+ update_control_display(control_ui);
+
} else {
- control_ui->controller->set_size_request (200, req.height);
- control_ui->controller->set_name (X_("ProcessorControlSlider"));
- }
- if (!desc.integer_step && !desc.toggled && use_knob) {
- control_ui->spin_box = manage (new ArdourSpinner (mcontrol, adj, insert));
- }
+ /* create the controller */
- adj->set_value (mcontrol->internal_to_interface(value));
+ /* XXX memory leak: SliderController not destroyed by ControlUI
+ * destructor, and manage() reports object hierarchy
+ * ambiguity.
+ */
+ control_ui->controller = AutomationController::create(insert, mcontrol->parameter(), desc, mcontrol, use_knob);
+
+ /* Control UI's don't need the rapid timer workaround */
+ control_ui->controller->stop_updating ();
+
+ /* XXX this code is not right yet, because it doesn't handle
+ the absence of bounds in any sensible fashion.
+ */
+
+ Adjustment* adj = control_ui->controller->adjustment();
+
+ if (desc.integer_step && !desc.toggled) {
+ control_ui->clickbox = new ClickBox (adj, "PluginUIClickBox", true);
+ Gtkmm2ext::set_size_request_to_display_given_text (*control_ui->clickbox, "g9999999", 2, 2);
+ if (desc.unit == ParameterDescriptor::MIDI_NOTE) {
+ control_ui->clickbox->set_printer (sigc::bind (sigc::mem_fun (*this, &GenericPluginUI::midinote_printer), control_ui));
+ } else {
+ control_ui->clickbox->set_printer (sigc::bind (sigc::mem_fun (*this, &GenericPluginUI::integer_printer), control_ui));
+ }
+ } else if (desc.toggled) {
+ ArdourButton* but = dynamic_cast<ArdourButton*> (control_ui->controller->widget());
+ assert(but);
+ but->set_tweaks(ArdourButton::Square);
+ } else if (use_knob) {
+ control_ui->controller->set_size_request (req.height * 1.5, req.height * 1.5);
+ } else {
+ control_ui->controller->set_size_request (200, -1);
+ control_ui->controller->set_name (X_("ProcessorControlSlider"));
+ }
+
+ if (!desc.integer_step && !desc.toggled && use_knob) {
+ control_ui->spin_box = manage (new ArdourSpinner (mcontrol, adj, insert));
+ }
+
+ adj->set_value (mcontrol->internal_to_interface(value));
+
+ }
if (use_knob) {
- set_size_request_to_display_given_text (control_ui->automate_button, "M", 2, 2);
+ control_ui->automate_button.set_sizing_text("M");
control_ui->label.set_alignment (0.5, 0.5);
control_ui->knobtable = manage (new Table());
control_ui->pack_start(*control_ui->knobtable, true, true);
- if (control_ui->clickbox) {
+ if (control_ui->combo) {
+ control_ui->knobtable->attach (control_ui->label, 0, 1, 0, 1);
+ control_ui->knobtable->attach (*control_ui->combo, 0, 1, 1, 2);
+ } else if (control_ui->clickbox) {
control_ui->knobtable->attach (*control_ui->clickbox, 0, 2, 0, 1);
control_ui->knobtable->attach (control_ui->label, 0, 1, 1, 2, FILL, SHRINK);
control_ui->knobtable->attach (control_ui->automate_button, 1, 2, 1, 2, SHRINK, SHRINK, 2, 0);
} else {
control_ui->pack_start (control_ui->label, true, true);
- if (control_ui->clickbox) {
+ if (control_ui->combo) {
+ control_ui->pack_start(*control_ui->combo, false, true);
+ } else if (control_ui->clickbox) {
control_ui->pack_start (*control_ui->clickbox, false, false);
} else if (control_ui->spin_box) {
control_ui->pack_start (*control_ui->spin_box, false, false);
control_ui->automate_button.set_sensitive (false);
set_tooltip(control_ui->automate_button, _("This control cannot be automated"));
} else {
- control_ui->automate_button.signal_clicked.connect (sigc::bind (sigc::mem_fun(*this, &GenericPluginUI::astate_clicked), control_ui));
- mcontrol->alist()->automation_state_changed.connect (control_connections, invalidator (*this), boost::bind (&GenericPluginUI::automation_state_changed, this, control_ui), gui_context());
+ control_ui->automate_button.signal_button_press_event().connect (
+ sigc::bind (sigc::mem_fun(*this, &GenericPluginUI::astate_button_event),
+ control_ui),
+ false);
+ mcontrol->alist()->automation_state_changed.connect (
+ control_connections,
+ invalidator (*this),
+ boost::bind (&GenericPluginUI::automation_state_changed, this, control_ui),
+ gui_context());
+ input_controls_with_automation.push_back (control_ui);
}
if (desc.toggled) {
automation_state_changed (control_ui);
+ /* Add to the list of CUIs that need manual update to workaround
+ * AutomationControl not knowing about preset loads */
input_controls.push_back (control_ui);
- input_controls_with_automation.push_back (control_ui);
- } else if (!is_input) {
+ } else {
control_ui->display = manage (new EventBox);
control_ui->display->set_name ("ParameterValueDisplay");
}
if (mcontrol) {
- mcontrol->Changed.connect (control_connections, invalidator (*this), boost::bind (&GenericPluginUI::ui_parameter_changed, this, control_ui), gui_context());
+ mcontrol->Changed.connect(control_connections, invalidator(*this),
+ boost::bind(&GenericPluginUI::ui_parameter_changed,
+ this, control_ui),
+ gui_context());
}
return control_ui;
}
-void
-GenericPluginUI::astate_clicked (ControlUI* cui)
+bool
+GenericPluginUI::astate_button_event (GdkEventButton* ev, ControlUI* cui)
{
+ if (ev->button != 1) {
+ return true;
+ }
+
using namespace Menu_Helpers;
if (automation_menu == 0) {
automation_menu = manage (new Menu);
automation_menu->set_name ("ArdourContextMenu");
+ automation_menu->set_reserve_toggle_size(false);
}
MenuList& items (automation_menu->items());
items.push_back (MenuElem (_("Touch"),
sigc::bind (sigc::mem_fun(*this, &GenericPluginUI::set_automation_state), (AutoState) Touch, cui)));
- automation_menu->popup (1, gtk_get_current_event_time());
+ anchored_menu_popup(automation_menu, &cui->automate_button, cui->automate_button.get_text(),
+ 1, ev->time);
+
+ return true;
}
void
if (cui->combo && cui->scale_points) {
for (ARDOUR::ScalePoints::iterator it = cui->scale_points->begin(); it != cui->scale_points->end(); ++it) {
if (it->second == val) {
- cui->combo->set_active_text(it->first);
+ cui->combo->set_text(it->first);
break;
}
}
}
void
-GenericPluginUI::control_combo_changed (ControlUI* cui)
+GenericPluginUI::update_input_displays ()
{
- if (!cui->ignore_change && cui->scale_points) {
- string value = cui->combo->get_active_text();
- insert->automation_control (cui->parameter())->set_value ((*cui->scale_points)[value], Controllable::NoGroup);
+ /* XXX This is a workaround for AutomationControl not knowing about preset loads */
+ for (vector<ControlUI*>::iterator i = input_controls.begin();
+ i != input_controls.end();
+ ++i) {
+ update_control_display(*i);
+ }
+ return;
+}
+
+void
+GenericPluginUI::control_combo_changed (ControlUI* cui, float value)
+{
+ if (!cui->ignore_change) {
+ insert->automation_control (cui->parameter())->set_value (value, Controllable::NoGroup);
}
}
bool
GenericPluginUI::stop_updating (GdkEventAny*)
{
- for (vector<ControlUI*>::iterator i = input_controls.begin(); i != input_controls.end(); ++i) {
- (*i)->controller->stop_updating ();
- }
-
if (output_controls.size() > 0 ) {
screen_update_connection.disconnect();
}
-
return false;
}
}
void
-GenericPluginUI::set_property (const ParameterDescriptor& desc,
- Gtk::FileChooserButton* widget)
+GenericPluginUI::set_path_property (const ParameterDescriptor& desc,
+ Gtk::FileChooserButton* widget)
{
plugin->set_property(desc.key, Variant(Variant::PATH, widget->get_filename()));
}
void
-GenericPluginUI::property_changed (uint32_t key, const Variant& value)
+GenericPluginUI::path_property_changed (uint32_t key, const Variant& value)
{
- PropertyControls::iterator c = _property_controls.find(key);
- if (c != _property_controls.end()) {
+ FilePathControls::iterator c = _filepath_controls.find(key);
+ if (c != _filepath_controls.end()) {
c->second->set_filename(value.get_path());
} else {
std::cerr << "warning: property change for property with no control" << std::endl;
projects / ardour.git / blobdiff