This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <fcntl.h>
#include <iostream>
#include <algorithm>
#include <cmath>
#include <vector>
#include <iomanip>
-#define __STDC_FORMAT_MACROS
#include <inttypes.h>
#include <float.h>
#include <sys/time.h>
#include <boost/shared_array.hpp>
-#include <midi++/types.h>
-#include <midi++/port.h>
-#include <midi++/manager.h>
-#include <pbd/pthread_utils.h>
-#include <pbd/error.h>
-#include <pbd/memento_command.h>
-#include <pbd/convert.h>
-
-#include <ardour/route.h>
-#include <ardour/session.h>
-#include <ardour/location.h>
-#include <ardour/dB.h>
-#include <ardour/panner.h>
-#include <ardour/tempo.h>
-#include <ardour/types.h>
+#include "midi++/types.h"
+#include "midi++/port.h"
+#include "midi++/manager.h"
+#include "pbd/pthread_utils.h"
+#include "pbd/error.h"
+#include "pbd/memento_command.h"
+#include "pbd/convert.h"
+
+#include "ardour/dB.h"
+#include "ardour/debug.h"
+#include "ardour/location.h"
+#include "ardour/midi_ui.h"
+#include "ardour/panner.h"
+#include "ardour/panner_shell.h"
+#include "ardour/route.h"
+#include "ardour/session.h"
+#include "ardour/tempo.h"
+#include "ardour/types.h"
+#include "ardour/audioengine.h"
#include "mackie_control_protocol.h"
using namespace ARDOUR;
using namespace std;
-using namespace sigc;
using namespace Mackie;
using namespace PBD;
-using boost::shared_ptr;
-
#include "i18n.h"
MackieMidiBuilder builder;
+#define midi_ui_context() MidiControlUI::instance() /* a UICallback-derived object that specifies the event loop for signal handling */
+#define ui_bind(f, ...) boost::protect (boost::bind (f, __VA_ARGS__))
+
MackieControlProtocol::MackieControlProtocol (Session& session)
- : ControlProtocol (session, X_("Mackie"))
- , _current_initial_bank( 0 )
- , connections_back( _connections )
- , _surface( 0 )
- , _ports_changed( false )
- , _polling( true )
- , pfd( 0 )
- , nfds( 0 )
- , _jog_wheel( *this )
- , _timecode_type( ARDOUR::AnyTime::BBT )
-{
-#ifdef DEBUG
- cout << "MackieControlProtocol::MackieControlProtocol" << endl;
-#endif
- // will start reading from ports, as soon as there are some
- pthread_create_and_store (X_("mackie monitor"), &thread, 0, _monitor_work, this);
+ : ControlProtocol (session, X_("Mackie"), MidiControlUI::instance())
+ , _current_initial_bank (0)
+ , _surface (0)
+ , _jog_wheel (*this)
+ , _timecode_type (ARDOUR::AnyTime::BBT)
+ , _input_bundle (new ARDOUR::Bundle (_("Mackie Control In"), true))
+ , _output_bundle (new ARDOUR::Bundle (_("Mackie Control Out"), false))
+{
+ DEBUG_TRACE (DEBUG::MackieControl, "MackieControlProtocol::MackieControlProtocol\n");
}
MackieControlProtocol::~MackieControlProtocol()
{
-#ifdef DEBUG
- cout << "~MackieControlProtocol::MackieControlProtocol" << endl;
-#endif
- try
- {
+ DEBUG_TRACE (DEBUG::MackieControl, "MackieControlProtocol::~MackieControlProtocol\n");
+
+ try {
close();
}
- catch ( exception & e )
- {
+ catch (exception & e) {
cout << "~MackieControlProtocol caught " << e.what() << endl;
}
- catch ( ... )
- {
+ catch (...) {
cout << "~MackieControlProtocol caught unknown" << endl;
}
-#ifdef DEBUG
- cout << "finished ~MackieControlProtocol::MackieControlProtocol" << endl;
-#endif
+
+ DEBUG_TRACE (DEBUG::MackieControl, "finished ~MackieControlProtocol::MackieControlProtocol\n");
}
-Mackie::Surface & MackieControlProtocol::surface()
+Mackie::Surface&
+MackieControlProtocol::surface()
{
- if ( _surface == 0 )
- {
- throw MackieControlException( "_surface is 0 in MackieControlProtocol::surface" );
+ if (_surface == 0) {
+ throw MackieControlException ("_surface is 0 in MackieControlProtocol::surface");
}
return *_surface;
}
-const Mackie::SurfacePort & MackieControlProtocol::mcu_port() const
+const Mackie::SurfacePort&
+MackieControlProtocol::mcu_port() const
{
- if ( _ports.size() < 1 )
- {
+ if (_ports.size() < 1) {
return _dummy_port;
- }
- else
- {
- return dynamic_cast<const MackiePort &>( *_ports[0] );
+ } else {
+ return dynamic_cast<const MackiePort &> (*_ports[0]);
}
}
-Mackie::SurfacePort & MackieControlProtocol::mcu_port()
+Mackie::SurfacePort&
+MackieControlProtocol::mcu_port()
{
- if ( _ports.size() < 1 )
- {
+ if (_ports.size() < 1) {
return _dummy_port;
- }
- else
- {
- return dynamic_cast<MackiePort &>( *_ports[0] );
+ } else {
+ return dynamic_cast<MackiePort &> (*_ports[0]);
}
}
// go to the previous track.
// Assume that get_sorted_routes().size() > route_table.size()
-void MackieControlProtocol::prev_track()
+void
+MackieControlProtocol::prev_track()
{
- if ( _current_initial_bank >= 1 )
- {
+ if (_current_initial_bank >= 1) {
session->set_dirty();
- switch_banks( _current_initial_bank - 1 );
+ switch_banks (_current_initial_bank - 1);
}
}
// go to the next track.
// Assume that get_sorted_routes().size() > route_table.size()
-void MackieControlProtocol::next_track()
+void
+MackieControlProtocol::next_track()
{
Sorted sorted = get_sorted_routes();
- if ( _current_initial_bank + route_table.size() < sorted.size() )
+ if (_current_initial_bank + route_table.size() < sorted.size())
{
session->set_dirty();
- switch_banks( _current_initial_bank + 1 );
+ switch_banks (_current_initial_bank + 1);
}
}
-void MackieControlProtocol::clear_route_signals()
+void
+MackieControlProtocol::clear_route_signals()
{
- for( RouteSignals::iterator it = route_signals.begin(); it != route_signals.end(); ++it )
- {
+ for (RouteSignals::iterator it = route_signals.begin(); it != route_signals.end(); ++it) {
delete *it;
}
route_signals.clear();
// return the port for a given id - 0 based
// throws an exception if no port found
-MackiePort & MackieControlProtocol::port_for_id( uint32_t index )
+MackiePort&
+MackieControlProtocol::port_for_id (uint32_t index)
{
uint32_t current_max = 0;
- for( MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it )
- {
+ for (MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it) {
current_max += (*it)->strips();
- if ( index < current_max ) return **it;
+ if (index < current_max) return **it;
}
// oops - no matching port
ostringstream os;
os << "No port for index " << index;
- throw MackieControlException( os.str() );
+ throw MackieControlException (os.str());
}
// predicate for sort call in get_sorted_routes
struct RouteByRemoteId
{
- bool operator () ( const shared_ptr<Route> & a, const shared_ptr<Route> & b ) const
+ bool operator () (const boost::shared_ptr<Route> & a, const boost::shared_ptr<Route> & b) const
{
return a->remote_control_id() < b->remote_control_id();
}
- bool operator () ( const Route & a, const Route & b ) const
+ bool operator () (const Route & a, const Route & b) const
{
return a.remote_control_id() < b.remote_control_id();
}
- bool operator () ( const Route * a, const Route * b ) const
+ bool operator () (const Route * a, const Route * b) const
{
return a->remote_control_id() < b->remote_control_id();
}
};
-MackieControlProtocol::Sorted MackieControlProtocol::get_sorted_routes()
+MackieControlProtocol::Sorted
+MackieControlProtocol::get_sorted_routes()
{
Sorted sorted;
// routes with remote_id 0 should never be added
// TODO verify this with ardour devs
- // remote_ids.insert( 0 );
+ // remote_ids.insert (0);
// sort in remote_id order, and exclude master, control and hidden routes
// and any routes that are already set.
- for (RouteList::iterator it = routes->begin(); it != routes->end(); ++it )
+ for (RouteList::iterator it = routes->begin(); it != routes->end(); ++it)
{
Route & route = **it;
if (
route.active()
&& !route.is_master()
&& !route.is_hidden()
- && !route.is_control()
- && remote_ids.find( route.remote_control_id() ) == remote_ids.end()
+ && !route.is_monitor()
+ && remote_ids.find (route.remote_control_id()) == remote_ids.end()
)
{
- sorted.push_back( *it );
- remote_ids.insert( route.remote_control_id() );
+ sorted.push_back (*it);
+ remote_ids.insert (route.remote_control_id());
}
}
- sort( sorted.begin(), sorted.end(), RouteByRemoteId() );
+ sort (sorted.begin(), sorted.end(), RouteByRemoteId());
return sorted;
}
-void MackieControlProtocol::refresh_current_bank()
+void
+MackieControlProtocol::refresh_current_bank()
{
- switch_banks( _current_initial_bank );
+ switch_banks (_current_initial_bank);
}
-void MackieControlProtocol::switch_banks( int initial )
+void
+MackieControlProtocol::switch_banks (int initial)
{
// DON'T prevent bank switch if initial == _current_initial_bank
// because then this method can't be used as a refresh
// sanity checking
Sorted sorted = get_sorted_routes();
int delta = sorted.size() - route_table.size();
- if ( initial < 0 || ( delta > 0 && initial > delta ) )
+ if (initial < 0 || (delta > 0 && initial > delta))
{
-#ifdef DEBUG
- cout << "not switching to " << initial << endl;
-#endif
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("not switching to %1\n", initial));
return;
}
_current_initial_bank = initial;
clear_route_signals();
// now set the signals for new routes
- if ( _current_initial_bank <= sorted.size() )
+ if (_current_initial_bank <= sorted.size())
{
// fetch the bank start and end to switch to
- uint32_t end_pos = min( route_table.size(), sorted.size() );
+ uint32_t end_pos = min (route_table.size(), sorted.size());
Sorted::iterator it = sorted.begin() + _current_initial_bank;
Sorted::iterator end = sorted.begin() + _current_initial_bank + end_pos;
-#ifdef DEBUG
- cout << "switch to " << _current_initial_bank << ", " << end_pos << endl;
-#endif
+
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("switch to %1, %2\n", _current_initial_bank, end_pos));
// link routes to strips
uint32_t i = 0;
- for ( ; it != end && it != sorted.end(); ++it, ++i )
+ for (; it != end && it != sorted.end(); ++it, ++i)
{
boost::shared_ptr<Route> route = *it;
+
+ assert (surface().strips[i]);
Strip & strip = *surface().strips[i];
-#ifdef DEBUG
- cout << "remote id " << route->remote_control_id() << " connecting " << route->name() << " to " << strip.name() << " with port " << port_for_id(i) << endl;
-#endif
+
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("remote id %1 connecting %2 to %3 with port %4\n",
+ route->remote_control_id(), route->name(), strip.name(), port_for_id(i)));
route_table[i] = route;
- RouteSignal * rs = new RouteSignal (route, *this, strip, port_for_id(i) );
- route_signals.push_back( rs );
+ RouteSignal * rs = new RouteSignal (route, *this, strip, port_for_id(i));
+ route_signals.push_back (rs);
// update strip from route
rs->notify_all();
}
// create dead strips if there aren't enough routes to
// fill a bank
- for ( ; i < route_table.size(); ++i )
+ for (; i < route_table.size(); ++i)
{
Strip & strip = *surface().strips[i];
// send zero for this strip
MackiePort & port = port_for_id(i);
- port.write( builder.zero_strip( port, strip ) );
+ port.write (builder.zero_strip (port, strip));
}
}
// display the current start bank.
- surface().display_bank_start( mcu_port(), builder, _current_initial_bank );
+ surface().display_bank_start (mcu_port(), builder, _current_initial_bank);
}
-void MackieControlProtocol::zero_all()
+void
+MackieControlProtocol::zero_all()
{
- // TODO turn off SMPTE displays
+ // TODO turn off Timecode displays
// zero all strips
- for ( Surface::Strips::iterator it = surface().strips.begin(); it != surface().strips.end(); ++it )
+ for (Surface::Strips::iterator it = surface().strips.begin(); it != surface().strips.end(); ++it)
{
- MackiePort & port = port_for_id( (*it)->index() );
- port.write( builder.zero_strip( port, **it ) );
+ MackiePort & port = port_for_id ((*it)->index());
+ port.write (builder.zero_strip (port, **it));
}
// and the master strip
- mcu_port().write( builder.zero_strip( dynamic_cast<MackiePort&>( mcu_port() ), master_strip() ) );
+ mcu_port().write (builder.zero_strip (dynamic_cast<MackiePort&> (mcu_port()), master_strip()));
// turn off global buttons and leds
// global buttons are only ever on mcu_port, so we don't have
// to figure out which port.
- for ( Surface::Controls::iterator it = surface().controls.begin(); it != surface().controls.end(); ++it )
+ for (Surface::Controls::iterator it = surface().controls.begin(); it != surface().controls.end(); ++it)
{
Control & control = **it;
- if ( !control.group().is_strip() && control.accepts_feedback() )
+ if (!control.group().is_strip() && control.accepts_feedback())
{
- mcu_port().write( builder.zero_control( control ) );
+ mcu_port().write (builder.zero_control (control));
}
}
// any hardware-specific stuff
- surface().zero_all( mcu_port(), builder );
+ surface().zero_all (mcu_port(), builder);
}
-int MackieControlProtocol::set_active( bool yn )
+int
+MackieControlProtocol::set_active (bool yn)
{
- if ( yn != _active )
+ if (yn != _active)
{
try
{
// the reason for the locking and unlocking is that
// glibmm can't do a condition wait on a RecMutex
- if ( yn )
+ if (yn)
{
// TODO what happens if this fails half way?
// create MackiePorts
{
- Glib::Mutex::Lock lock( update_mutex );
+ Glib::Mutex::Lock lock (update_mutex);
create_ports();
}
- // make sure the ports are being listened to
- update_ports();
-
- // wait until poll thread is running, with ports to poll
- // the mutex is only there because conditions require a mutex
- {
- Glib::Mutex::Lock lock( update_mutex );
- while ( nfds == 0 ) update_cond.wait( update_mutex );
- }
-
// now initialise MackiePorts - ie exchange sysex messages
- for( MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it )
- {
+ for (MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it) {
(*it)->open();
}
// TODO a more sophisticated approach would
// allow things to start up with only an MCU, even if
// extenders were specified but not responding.
- for( MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it )
- {
+ for (MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it) {
(*it)->wait_for_init();
}
// send current control positions to surface
// must come after _active = true otherwise it won't run
update_surface();
- }
- else
- {
+ } else {
close();
_active = false;
}
}
- catch( exception & e )
- {
-#ifdef DEBUG
- cout << "set_active to false because exception caught: " << e.what() << endl;
-#endif
+
+ catch (exception & e) {
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("set_active to false because exception caught: %1\n", e.what()));
_active = false;
throw;
}
return 0;
}
-bool MackieControlProtocol::handle_strip_button( Control & control, ButtonState bs, boost::shared_ptr<Route> route )
+bool
+MackieControlProtocol::handle_strip_button (Control & control, ButtonState bs, boost::shared_ptr<Route> route)
{
bool state = false;
- if ( bs == press )
+ if (bs == press)
{
- if ( control.name() == "recenable" )
+ if (control.name() == "recenable")
{
state = !route->record_enabled();
- route->set_record_enable( state, this );
+ route->set_record_enabled (state, this);
}
- else if ( control.name() == "mute" )
+ else if (control.name() == "mute")
{
state = !route->muted();
- route->set_mute( state, this );
+ route->set_mute (state, this);
}
- else if ( control.name() == "solo" )
+ else if (control.name() == "solo")
{
state = !route->soloed();
- route->set_solo( state, this );
+ route->set_solo (state, this);
}
- else if ( control.name() == "select" )
+ else if (control.name() == "select")
{
// TODO make the track selected. Whatever that means.
- //state = default_button_press( dynamic_cast<Button&>( control ) );
+ //state = default_button_press (dynamic_cast<Button&> (control));
}
- else if ( control.name() == "vselect" )
+ else if (control.name() == "vselect")
{
// TODO could be used to select different things to apply the pot to?
- //state = default_button_press( dynamic_cast<Button&>( control ) );
+ //state = default_button_press (dynamic_cast<Button&> (control));
}
}
- if ( control.name() == "fader_touch" )
+ if (control.name() == "fader_touch")
{
state = bs == press;
- control.strip().gain().in_use( state );
+ control.strip().gain().in_use (state);
}
return state;
}
-void MackieControlProtocol::update_led( Mackie::Button & button, Mackie::LedState ls )
+void
+MackieControlProtocol::update_led (Mackie::Button & button, Mackie::LedState ls)
{
- if ( ls != none )
+ if (ls != none)
{
SurfacePort * port = 0;
- if ( button.group().is_strip() )
+ if (button.group().is_strip())
{
- if ( button.group().is_master() )
+ if (button.group().is_master())
{
port = &mcu_port();
}
else
{
- port = &port_for_id( dynamic_cast<const Strip&>( button.group() ).index() );
+ port = &port_for_id (dynamic_cast<const Strip&> (button.group()).index());
}
}
else
{
port = &mcu_port();
}
- port->write( builder.build_led( button, ls ) );
+ port->write (builder.build_led (button, ls));
}
}
-void MackieControlProtocol::update_smpte_beats_led()
+void
+MackieControlProtocol::update_timecode_beats_led()
{
- switch ( _timecode_type )
+ switch (_timecode_type)
{
case ARDOUR::AnyTime::BBT:
- update_global_led( "beats", on );
- update_global_led( "smpte", off );
+ update_global_led ("beats", on);
+ update_global_led ("timecode", off);
break;
- case ARDOUR::AnyTime::SMPTE:
- update_global_led( "smpte", on );
- update_global_led( "beats", off );
+ case ARDOUR::AnyTime::Timecode:
+ update_global_led ("timecode", on);
+ update_global_led ("beats", off);
break;
default:
ostringstream os;
os << "Unknown Anytime::Type " << _timecode_type;
- throw runtime_error( os.str() );
+ throw runtime_error (os.str());
}
}
-void MackieControlProtocol::update_global_button( const string & name, LedState ls )
+void
+MackieControlProtocol::update_global_button (const string & name, LedState ls)
{
- if ( surface().controls_by_name.find( name ) != surface().controls_by_name.end() )
+ if (surface().controls_by_name.find (name) != surface().controls_by_name.end())
{
- Button * button = dynamic_cast<Button*>( surface().controls_by_name[name] );
- mcu_port().write( builder.build_led( button->led(), ls ) );
+ Button * button = dynamic_cast<Button*> (surface().controls_by_name[name]);
+ mcu_port().write (builder.build_led (button->led(), ls));
}
else
{
-#ifdef DEBUG
- cout << "Button " << name << " not found" << endl;
-#endif
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Button %1 not found\n", name));
}
}
-void MackieControlProtocol::update_global_led( const string & name, LedState ls )
+void
+MackieControlProtocol::update_global_led (const string & name, LedState ls)
{
- if ( surface().controls_by_name.find( name ) != surface().controls_by_name.end() )
+ if (surface().controls_by_name.find (name) != surface().controls_by_name.end())
{
- Led * led = dynamic_cast<Led*>( surface().controls_by_name[name] );
- mcu_port().write( builder.build_led( *led, ls ) );
+ Led * led = dynamic_cast<Led*> (surface().controls_by_name[name]);
+ mcu_port().write (builder.build_led (*led, ls));
}
else
{
-#ifdef DEBUG
- cout << "Led " << name << " not found" << endl;
-#endif
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Led %1 not found\n", name));
}
}
// send messages to surface to set controls to correct values
-void MackieControlProtocol::update_surface()
+void
+MackieControlProtocol::update_surface()
{
- if ( _active )
+ if (_active)
{
// do the initial bank switch to connect signals
// _current_initial_bank is initialised by set_state
- switch_banks( _current_initial_bank );
+ switch_banks (_current_initial_bank);
// create a RouteSignal for the master route
- boost::shared_ptr<Route> mr = master_route ();
- if (mr) {
- master_route_signal = shared_ptr<RouteSignal> (new RouteSignal (mr, *this, master_strip(), mcu_port()) );
- // update strip from route
- master_route_signal->notify_all();
- }
+ boost::shared_ptr<Route> mr = master_route ();
+ if (mr) {
+ master_route_signal = boost::shared_ptr<RouteSignal> (new RouteSignal (mr, *this, master_strip(), mcu_port()));
+ // update strip from route
+ master_route_signal->notify_all();
+ }
// sometimes the jog wheel is a pot
- surface().blank_jog_ring( mcu_port(), builder );
+ surface().blank_jog_ring (mcu_port(), builder);
// update global buttons and displays
notify_record_state_changed();
notify_transport_state_changed();
- update_smpte_beats_led();
+ update_timecode_beats_led();
}
}
-void MackieControlProtocol::connect_session_signals()
+void
+MackieControlProtocol::connect_session_signals()
{
// receive routes added
- connections_back = session->RouteAdded.connect( ( mem_fun (*this, &MackieControlProtocol::notify_route_added) ) );
+ session->RouteAdded.connect(session_connections, MISSING_INVALIDATOR, ui_bind (&MackieControlProtocol::notify_route_added, this, _1), midi_ui_context());
// receive record state toggled
- connections_back = session->RecordStateChanged.connect( ( mem_fun (*this, &MackieControlProtocol::notify_record_state_changed) ) );
+ session->RecordStateChanged.connect(session_connections, MISSING_INVALIDATOR, ui_bind (&MackieControlProtocol::notify_record_state_changed, this), midi_ui_context());
// receive transport state changed
- connections_back = session->TransportStateChange.connect( ( mem_fun (*this, &MackieControlProtocol::notify_transport_state_changed) ) );
+ session->TransportStateChange.connect(session_connections, MISSING_INVALIDATOR, ui_bind (&MackieControlProtocol::notify_transport_state_changed, this), midi_ui_context());
// receive punch-in and punch-out
- connections_back = Config->ParameterChanged.connect( ( mem_fun (*this, &MackieControlProtocol::notify_parameter_changed) ) );
- session->config.ParameterChanged.connect ( ( mem_fun (*this, &MackieControlProtocol::notify_parameter_changed) ) );
+ Config->ParameterChanged.connect(session_connections, MISSING_INVALIDATOR, ui_bind (&MackieControlProtocol::notify_parameter_changed, this, _1), midi_ui_context());
+ session->config.ParameterChanged.connect (session_connections, MISSING_INVALIDATOR, ui_bind (&MackieControlProtocol::notify_parameter_changed, this, _1), midi_ui_context());
// receive rude solo changed
- connections_back = session->SoloActive.connect( ( mem_fun (*this, &MackieControlProtocol::notify_solo_active_changed) ) );
+ session->SoloActive.connect(session_connections, MISSING_INVALIDATOR, ui_bind (&MackieControlProtocol::notify_solo_active_changed, this, _1), midi_ui_context());
// make sure remote id changed signals reach here
// see also notify_route_added
Sorted sorted = get_sorted_routes();
- for ( Sorted::iterator it = sorted.begin(); it != sorted.end(); ++it )
- {
- connections_back = (*it)->RemoteControlIDChanged.connect( ( mem_fun (*this, &MackieControlProtocol::notify_remote_id_changed) ) );
+
+ for (Sorted::iterator it = sorted.begin(); it != sorted.end(); ++it) {
+ (*it)->RemoteControlIDChanged.connect (route_connections, MISSING_INVALIDATOR, ui_bind(&MackieControlProtocol::notify_remote_id_changed, this), midi_ui_context());
}
}
-void MackieControlProtocol::add_port( MIDI::Port & midi_port, int number )
+void
+MackieControlProtocol::add_port (MIDI::Port & midi_input_port, MIDI::Port & midi_output_port, int number)
{
-#ifdef DEBUG
- cout << "add port " << midi_port.name() << ", " << midi_port.device() << ", " << midi_port.type() << endl;
- cout << "MIDI::Port::ALSA_Sequencer " << MIDI::Port::ALSA_Sequencer << endl;
- cout << "MIDI::Port::Unknown " << MIDI::Port::Unknown << endl;
-#endif
- if ( string( midi_port.device() ) == string( "ardour" ) && midi_port.type() == MIDI::Port::ALSA_Sequencer )
- {
- throw MackieControlException( "The Mackie MCU driver will not use a port with device=ardour" );
- }
- else if ( midi_port.type() == MIDI::Port::ALSA_Sequencer )
- {
- throw MackieControlException( "alsa/sequencer ports don't work with the Mackie MCU driver right now" );
- }
- else
- {
- MackiePort * sport = new MackiePort( *this, midi_port, number );
- _ports.push_back( sport );
-
- connections_back = sport->init_event.connect(
- sigc::bind (
- mem_fun (*this, &MackieControlProtocol::handle_port_init)
- , sport
- )
- );
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("add port %1 %2\n", midi_input_port.name(), midi_output_port.name()));
- connections_back = sport->active_event.connect(
- sigc::bind (
- mem_fun (*this, &MackieControlProtocol::handle_port_active)
- , sport
- )
- );
+ MackiePort * sport = new MackiePort (*this, midi_input_port, midi_output_port, number);
+ _ports.push_back (sport);
+
+ sport->init_event.connect_same_thread (port_connections, boost::bind (&MackieControlProtocol::handle_port_init, this, sport));
+ sport->active_event.connect_same_thread (port_connections, boost::bind (&MackieControlProtocol::handle_port_active, this, sport));
+ sport->inactive_event.connect_same_thread (port_connections, boost::bind (&MackieControlProtocol::handle_port_inactive, this, sport));
- connections_back = sport->inactive_event.connect(
- sigc::bind (
- mem_fun (*this, &MackieControlProtocol::handle_port_inactive)
- , sport
- )
+ _input_bundle->add_channel (
+ midi_input_port.name(),
+ ARDOUR::DataType::MIDI,
+ session->engine().make_port_name_non_relative (midi_input_port.name())
+ );
+
+ _output_bundle->add_channel (
+ midi_output_port.name(),
+ ARDOUR::DataType::MIDI,
+ session->engine().make_port_name_non_relative (midi_output_port.name())
);
-
- _ports_changed = true;
- }
}
-void MackieControlProtocol::create_ports()
+void
+MackieControlProtocol::create_ports()
{
MIDI::Manager * mm = MIDI::Manager::instance();
+ MIDI::Port * midi_input_port = mm->add_port (
+ new MIDI::Port (string_compose (_("%1 in"), default_port_name), MIDI::Port::IsInput, session->engine().jack())
+ );
+ MIDI::Port * midi_output_port = mm->add_port (
+ new MIDI::Port (string_compose (_("%1 out"), default_port_name), MIDI::Port::IsOutput, session->engine().jack())
+ );
- // open main port
- {
- MIDI::Port * midi_port = mm->port( default_port_name );
+ // open main port
- if ( midi_port == 0 ) {
- ostringstream os;
- os << string_compose( _("no MIDI port named \"%1\" exists - Mackie control disabled"), default_port_name );
- error << os.str() << endmsg;
- throw MackieControlException( os.str() );
- }
- add_port( *midi_port, 0 );
+ if (!midi_input_port->ok() || !midi_output_port->ok()) {
+ ostringstream os;
+ os << _("Mackie control MIDI ports could not be created; Mackie control disabled");
+ error << os.str() << endmsg;
+ throw MackieControlException (os.str());
}
+ add_port (*midi_input_port, *midi_output_port, 0);
+
// open extender ports. Up to 9. Should be enough.
// could also use mm->get_midi_ports()
- string ext_port_base = "mcu_xt_";
- for ( int index = 1; index <= 9; ++index )
- {
- ostringstream os;
- os << ext_port_base << index;
- MIDI::Port * midi_port = mm->port( os.str() );
- if ( midi_port != 0 ) add_port( *midi_port, index );
+
+ for (int index = 1; index <= 9; ++index) {
+ MIDI::Port * midi_input_port = mm->add_port (
+ new MIDI::Port (string_compose (_("mcu_xt_%1 in"), index), MIDI::Port::IsInput, session->engine().jack())
+ );
+ MIDI::Port * midi_output_port = mm->add_port (
+ new MIDI::Port (string_compose (_("mcu_xt_%1 out"), index), MIDI::Port::IsOutput, session->engine().jack())
+ );
+ if (midi_input_port->ok() && midi_output_port->ok()) {
+ add_port (*midi_input_port, *midi_output_port, index);
+ }
}
}
-shared_ptr<Route> MackieControlProtocol::master_route()
+boost::shared_ptr<Route>
+MackieControlProtocol::master_route()
{
return session->master_out ();
}
-Strip & MackieControlProtocol::master_strip()
+Strip&
+MackieControlProtocol::master_strip()
{
- return dynamic_cast<Strip&>( *surface().groups["master"] );
+ return dynamic_cast<Strip&> (*surface().groups["master"]);
}
-void MackieControlProtocol::initialize_surface()
+void
+MackieControlProtocol::initialize_surface()
{
// set up the route table
int strips = 0;
- for( MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it )
- {
+ for (MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it) {
strips += (*it)->strips();
}
- set_route_table_size( strips );
+ set_route_table_size (strips);
// TODO same as code in mackie_port.cc
string emulation = ARDOUR::Config->get_mackie_emulation();
- if ( emulation == "bcf" )
+ if (emulation == "bcf")
{
- _surface = new BcfSurface( strips );
+ _surface = new BcfSurface (strips);
}
- else if ( emulation == "mcu" )
+ else if (emulation == "mcu")
{
- _surface = new MackieSurface( strips );
+ _surface = new MackieSurface (strips);
}
else
{
ostringstream os;
os << "no Surface class found for emulation: " << emulation;
- throw MackieControlException( os.str() );
+ throw MackieControlException (os.str());
}
_surface->init();
// Connect events. Must be after route table otherwise there will be trouble
- for( MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it )
- {
- connections_back = (*it)->control_event.connect( ( mem_fun (*this, &MackieControlProtocol::handle_control_event) ) );
+
+ for (MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it) {
+ (*it)->control_event.connect_same_thread (port_connections, boost::bind (&MackieControlProtocol::handle_control_event, this, _1, _2, _3));
}
}
-void MackieControlProtocol::close()
+void
+MackieControlProtocol::close()
{
- // stop polling, and wait for it...
+
// must be before other shutdown otherwise polling loop
// calls methods on objects that are deleted
- _polling = false;
- pthread_join( thread, 0 );
-
- // TODO disconnect port active/inactive signals
- // Or at least put a lock here
- // disconnect global signals from Session
- // TODO Since *this is a sigc::trackable, this shouldn't be necessary
- // but it is for some reason
-#if 0
- for( vector<sigc::connection>::iterator it = _connections.begin(); it != _connections.end(); ++it )
- {
- it->disconnect();
- }
-#endif
+ port_connections.drop_connections ();
+ session_connections.drop_connections ();
+ route_connections.drop_connections ();
- if ( _surface != 0 )
- {
+ if (_surface != 0) {
// These will fail if the port has gone away.
// So catch the exception and do the rest of the
// close afterwards
// because the bcf doesn't respond to the next 3 sysex messages
- try
- {
+ try {
zero_all();
}
- catch ( exception & e )
- {
-#ifdef DEBUG
- cout << "MackieControlProtocol::close caught exception: " << e.what() << endl;
-#endif
+
+ catch (exception & e) {
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("MackieControlProtocol::close caught exception: %1\n", e.what()));
}
- for( MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it )
- {
- try
- {
+ for (MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it) {
+ try {
MackiePort & port = **it;
// faders to minimum
- port.write_sysex( 0x61 );
+ port.write_sysex (0x61);
// All LEDs off
- port.write_sysex( 0x62 );
+ port.write_sysex (0x62);
// Reset (reboot into offline mode)
- port.write_sysex( 0x63 );
+ port.write_sysex (0x63);
}
- catch ( exception & e )
- {
-#ifdef DEBUG
- cout << "MackieControlProtocol::close caught exception: " << e.what() << endl;
-#endif
+ catch (exception & e) {
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("MackieControlProtocol::close caught exception: %1\n", e.what()));
}
}
// disconnect routes from strips
clear_route_signals();
-
delete _surface;
_surface = 0;
}
// shut down MackiePorts
- for( MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it )
- {
+ for (MackiePorts::iterator it = _ports.begin(); it != _ports.end(); ++it) {
delete *it;
}
- _ports.clear();
- // this is done already in monitor_work. But it's here so we know.
- delete[] pfd;
- pfd = 0;
- nfds = 0;
-}
-
-void* MackieControlProtocol::_monitor_work (void* arg)
-{
- return static_cast<MackieControlProtocol*>(arg)->monitor_work ();
+ _ports.clear();
}
-XMLNode & MackieControlProtocol::get_state()
+XMLNode&
+MackieControlProtocol::get_state()
{
-#ifdef DEBUG
- cout << "MackieControlProtocol::get_state" << endl;
-#endif
+ DEBUG_TRACE (DEBUG::MackieControl, "MackieControlProtocol::get_state\n");
// add name of protocol
- XMLNode* node = new XMLNode( X_("Protocol") );
- node->add_property( X_("name"), _name );
+ XMLNode* node = new XMLNode (X_("Protocol"));
+ node->add_property (X_("name"), _name);
// add current bank
ostringstream os;
os << _current_initial_bank;
- node->add_property( X_("bank"), os.str() );
+ node->add_property (X_("bank"), os.str());
return *node;
}
-int MackieControlProtocol::set_state (const XMLNode & node, int /*version*/)
+int
+MackieControlProtocol::set_state (const XMLNode & node, int /*version*/)
{
-#ifdef DEBUG
- cout << "MackieControlProtocol::set_state: active " << _active << endl;
-#endif
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("MackieControlProtocol::set_state: active %1\n", _active));
+
int retval = 0;
// fetch current bank
- if ( node.property( X_("bank") ) != 0 )
- {
- string bank = node.property( X_("bank") )->value();
- try
- {
- set_active( true );
- uint32_t new_bank = atoi( bank.c_str() );
- if ( _current_initial_bank != new_bank ) switch_banks( new_bank );
+
+ if (node.property (X_("bank")) != 0) {
+ string bank = node.property (X_("bank"))->value();
+ try {
+ set_active (true);
+ uint32_t new_bank = atoi (bank.c_str());
+ if (_current_initial_bank != new_bank) {
+ switch_banks (new_bank);
+ }
}
- catch ( exception & e )
- {
-#ifdef DEBUG
- cout << "exception in MackieControlProtocol::set_state: " << e.what() << endl;
-#endif
+ catch (exception & e) {
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("exception in MackieControlProtocol::set_state: %1\n", e.what()));
return -1;
}
}
return retval;
}
-void MackieControlProtocol::handle_control_event( SurfacePort & port, Control & control, const ControlState & state )
+void
+MackieControlProtocol::handle_control_event (SurfacePort & port, Control & control, const ControlState & state)
{
// find the route for the control, if there is one
boost::shared_ptr<Route> route;
- if ( control.group().is_strip() )
- {
- if ( control.group().is_master() )
- {
+ if (control.group().is_strip()) {
+ if (control.group().is_master()) {
route = master_route();
- }
- else
- {
- uint32_t index = control.ordinal() - 1 + ( port.number() * port.strips() );
- if ( index < route_table.size() )
+ } else {
+ uint32_t index = control.ordinal() - 1 + (port.number() * port.strips());
+ if (index < route_table.size())
route = route_table[index];
else
cerr << "Warning: index is " << index << " which is not in the route table, size: " << route_table.size() << endl;
// This handles control element events from the surface
// the state of the controls on the surface is usually updated
// from UI events.
- switch ( control.type() )
- {
+ switch (control.type()) {
case Control::type_fader:
// find the route in the route table for the id
// if the route isn't available, skip it
// at which point the fader should just reset itself
- if ( route != 0 )
+ if (route != 0)
{
- route->gain_control()->set_value( state.pos );
+ route->gain_control()->set_value (state.pos);
// must echo bytes back to slider now, because
// the notifier only works if the fader is not being
// touched. Which it is if we're getting input.
- port.write( builder.build_fader( (Fader&)control, state.pos ) );
+ port.write (builder.build_fader ((Fader&)control, state.pos));
}
break;
case Control::type_button:
- if ( control.group().is_strip() )
- {
+ if (control.group().is_strip()) {
// strips
- if ( route != 0 )
- {
- handle_strip_button( control, state.button_state, route );
- }
- else
- {
+ if (route != 0) {
+ handle_strip_button (control, state.button_state, route);
+ } else {
// no route so always switch the light off
// because no signals will be emitted by a non-route
- port.write( builder.build_led( control.led(), off ) );
+ port.write (builder.build_led (control.led(), off));
}
- }
- else if ( control.group().is_master() )
- {
+ } else if (control.group().is_master()) {
// master fader touch
- if ( route != 0 )
- {
- handle_strip_button( control, state.button_state, route );
+ if (route != 0) {
+ handle_strip_button (control, state.button_state, route);
}
- }
- else
- {
+ } else {
// handle all non-strip buttons
- surface().handle_button( *this, state.button_state, dynamic_cast<Button&>( control ) );
+ surface().handle_button (*this, state.button_state, dynamic_cast<Button&> (control));
}
break;
// pot (jog wheel, external control)
case Control::type_pot:
- if ( control.group().is_strip() )
- {
- if ( route != 0 && route->panner() )
- {
+ if (control.group().is_strip()) {
+ if (route) {
+ boost::shared_ptr<Panner> panner = route->panner_shell()->panner();
// pan for mono input routes, or stereo linked panners
- if ( route->panner()->npanners() == 1 || ( route->panner()->npanners() == 2 && route->panner()->linked() ) )
- {
- // assume pan for now
- float xpos;
- route->panner()->streampanner (0).get_effective_position (xpos);
-
- // calculate new value, and trim
- xpos += state.delta * state.sign;
- if ( xpos > 1.0 )
- xpos = 1.0;
- else if ( xpos < 0.0 )
- xpos = 0.0;
-
- route->panner()->streampanner (0).set_position( xpos );
+ if (panner) {
+ double p = panner->position ();
+
+ // calculate new value, and adjust
+ p += state.delta * state.sign;
+ p = min (1.0, p);
+ p = max (0.0, p);
+ panner->set_position (p);
}
}
else
{
// it's a pot for an umnapped route, so turn all the lights off
- port.write( builder.build_led_ring( dynamic_cast<Pot &>( control ), off ) );
+ port.write (builder.build_led_ring (dynamic_cast<Pot &> (control), off));
}
}
else
{
- if ( control.is_jog() )
+ if (control.is_jog())
{
- _jog_wheel.jog_event( port, control, state );
+ _jog_wheel.jog_event (port, control, state);
}
else
{
/////////////////////////////////////////////////
// handlers for Route signals
// TODO should these be part of RouteSignal?
-// They started off as sigc handlers for signals
+// They started off as signal/slot handlers for signals
// from Route, but they're also used in polling for automation
/////////////////////////////////////////////////
-void MackieControlProtocol::notify_solo_changed( RouteSignal * route_signal )
+void
+MackieControlProtocol::notify_solo_changed (RouteSignal * route_signal)
{
try
{
Button & button = route_signal->strip().solo();
- route_signal->port().write( builder.build_led( button, route_signal->route()->soloed() ) );
+ route_signal->port().write (builder.build_led (button, route_signal->route()->soloed()));
}
- catch( exception & e )
+ catch (exception & e)
{
cout << e.what() << endl;
}
}
-void MackieControlProtocol::notify_mute_changed( RouteSignal * route_signal )
+void
+MackieControlProtocol::notify_mute_changed (RouteSignal * route_signal)
{
try
{
Button & button = route_signal->strip().mute();
- route_signal->port().write( builder.build_led( button, route_signal->route()->muted() ) );
+ route_signal->port().write (builder.build_led (button, route_signal->route()->muted()));
}
- catch( exception & e )
+ catch (exception & e)
{
cout << e.what() << endl;
}
}
-void MackieControlProtocol::notify_record_enable_changed( RouteSignal * route_signal )
+void
+MackieControlProtocol::notify_record_enable_changed (RouteSignal * route_signal)
{
try
{
Button & button = route_signal->strip().recenable();
- route_signal->port().write( builder.build_led( button, route_signal->route()->record_enabled() ) );
+ route_signal->port().write (builder.build_led (button, route_signal->route()->record_enabled()));
}
- catch( exception & e )
+ catch (exception & e)
{
cout << e.what() << endl;
}
{
try
{
-#ifdef DEBUG
- cout << "MackieControlProtocol::notify_active_changed" << endl;
-#endif
+ DEBUG_TRACE (DEBUG::MackieControl, "MackieControlProtocol::notify_active_changed\n");
refresh_current_bank();
}
- catch( exception & e )
+ catch (exception & e)
{
cout << e.what() << endl;
}
}
-void MackieControlProtocol::notify_gain_changed( RouteSignal * route_signal, bool force_update )
+void
+MackieControlProtocol::notify_gain_changed (RouteSignal * route_signal, bool force_update)
{
try
{
Fader & fader = route_signal->strip().gain();
- if ( !fader.in_use() )
+ if (!fader.in_use())
{
float gain_value = route_signal->route()->gain_control()->get_value();
// check that something has actually changed
- if ( force_update || gain_value != route_signal->last_gain_written() )
+ if (force_update || gain_value != route_signal->last_gain_written())
{
- route_signal->port().write( builder.build_fader( fader, gain_value ) );
- route_signal->last_gain_written( gain_value );
+ route_signal->port().write (builder.build_fader (fader, gain_value));
+ route_signal->last_gain_written (gain_value);
}
}
}
- catch( exception & e )
+ catch (exception & e)
{
cout << e.what() << endl;
}
}
-void MackieControlProtocol::notify_name_changed( RouteSignal * route_signal )
+void
+MackieControlProtocol::notify_property_changed (const PropertyChange& what_changed, RouteSignal * route_signal)
{
+ if (!what_changed.contains (Properties::name)) {
+ return;
+ }
+
try
{
Strip & strip = route_signal->strip();
- if ( !strip.is_master() )
+
+ /* XXX: not sure about this check to only display stuff for strips of index < 8 */
+ if (!strip.is_master() && strip.index() < 8)
{
string line1;
string fullname = route_signal->route()->name();
- if ( fullname.length() <= 6 )
+ if (fullname.length() <= 6)
{
line1 = fullname;
}
else
{
- line1 = PBD::short_version( fullname, 6 );
+ line1 = PBD::short_version (fullname, 6);
}
SurfacePort & port = route_signal->port();
- port.write( builder.strip_display( port, strip, 0, line1 ) );
- port.write( builder.strip_display_blank( port, strip, 1 ) );
+ port.write (builder.strip_display (port, strip, 0, line1));
+ port.write (builder.strip_display_blank (port, strip, 1));
}
}
- catch( exception & e )
+ catch (exception & e)
{
cout << e.what() << endl;
}
}
-void MackieControlProtocol::notify_panner_changed( RouteSignal * route_signal, bool force_update )
+void
+MackieControlProtocol::notify_panner_changed (RouteSignal * route_signal, bool force_update)
{
try
{
Pot & pot = route_signal->strip().vpot();
boost::shared_ptr<Panner> panner = route_signal->route()->panner();
- if ( (panner && panner->npanners() == 1) || ( panner->npanners() == 2 && panner->linked() ) )
- {
- float pos;
- route_signal->route()->panner()->streampanner(0).get_effective_position( pos );
+ if (panner) {
+ double pos = panner->position ();
// cache the MidiByteArray here, because the mackie led control is much lower
// resolution than the panner control. So we save lots of byte
// sends in spite of more work on the comparison
- MidiByteArray bytes = builder.build_led_ring( pot, ControlState( on, pos ), MackieMidiBuilder::midi_pot_mode_dot );
+ MidiByteArray bytes = builder.build_led_ring (pot, ControlState (on, pos), MackieMidiBuilder::midi_pot_mode_dot);
// check that something has actually changed
- if ( force_update || bytes != route_signal->last_pan_written() )
+ if (force_update || bytes != route_signal->last_pan_written())
{
- route_signal->port().write( bytes );
- route_signal->last_pan_written( bytes );
+ route_signal->port().write (bytes);
+ route_signal->last_pan_written (bytes);
}
}
else
{
- route_signal->port().write( builder.zero_control( pot ) );
+ route_signal->port().write (builder.zero_control (pot));
}
}
- catch( exception & e )
+ catch (exception & e)
{
cout << e.what() << endl;
}
}
// TODO handle plugin automation polling
-void MackieControlProtocol::update_automation( RouteSignal & rs )
+void
+MackieControlProtocol::update_automation (RouteSignal & rs)
{
ARDOUR::AutoState gain_state = rs.route()->gain_control()->automation_state();
- if ( gain_state == Touch || gain_state == Play )
+
+ if (gain_state == Touch || gain_state == Play)
{
- notify_gain_changed( &rs, false );
+ notify_gain_changed (&rs, false);
}
- if ( rs.route()->panner() ) {
+ if (rs.route()->panner()) {
ARDOUR::AutoState panner_state = rs.route()->panner()->automation_state();
- if ( panner_state == Touch || panner_state == Play )
+ if (panner_state == Touch || panner_state == Play)
{
- notify_panner_changed( &rs, false );
+ notify_panner_changed (&rs, false);
}
}
- _automation_last.start();
}
-string MackieControlProtocol::format_bbt_timecode( nframes_t now_frame )
+string
+MackieControlProtocol::format_bbt_timecode (framepos_t now_frame)
{
- BBT_Time bbt_time;
- session->bbt_time( now_frame, bbt_time );
+ Timecode::BBT_Time bbt_time;
+ session->bbt_time (now_frame, bbt_time);
// According to the Logic docs
// digits: 888/88/88/888
os << setw(2) << setfill('0') << bbt_time.beats;
// figure out subdivisions per beat
- const Meter & meter = session->tempo_map().meter_at( now_frame );
+ const Meter & meter = session->tempo_map().meter_at (now_frame);
int subdiv = 2;
- if ( meter.note_divisor() == 8 && (meter.beats_per_bar() == 12.0 || meter.beats_per_bar() == 9.0 || meter.beats_per_bar() == 6.0) )
+ if (meter.note_divisor() == 8 && (meter.beats_per_bar() == 12.0 || meter.beats_per_bar() == 9.0 || meter.beats_per_bar() == 6.0))
{
subdiv = 3;
}
- uint32_t subdivisions = bbt_time.ticks / uint32_t( Meter::ticks_per_beat / subdiv );
- uint32_t ticks = bbt_time.ticks % uint32_t( Meter::ticks_per_beat / subdiv );
+ uint32_t subdivisions = bbt_time.ticks / uint32_t (Timecode::BBT_Time::ticks_per_beat / subdiv);
+ uint32_t ticks = bbt_time.ticks % uint32_t (Timecode::BBT_Time::ticks_per_beat / subdiv);
os << setw(2) << setfill('0') << subdivisions + 1;
os << setw(3) << setfill('0') << ticks;
return os.str();
}
-string MackieControlProtocol::format_smpte_timecode( nframes_t now_frame )
+string
+MackieControlProtocol::format_timecode_timecode (framepos_t now_frame)
{
- SMPTE::Time smpte;
- session->smpte_time( now_frame, smpte );
+ Timecode::Time timecode;
+ session->timecode_time (now_frame, timecode);
// According to the Logic docs
// digits: 888/88/88/888
- // SMPTE mode: Hours/Minutes/Seconds/Frames
+ // Timecode mode: Hours/Minutes/Seconds/Frames
ostringstream os;
- os << setw(3) << setfill('0') << smpte.hours;
- os << setw(2) << setfill('0') << smpte.minutes;
- os << setw(2) << setfill('0') << smpte.seconds;
- os << setw(3) << setfill('0') << smpte.frames;
+ os << setw(3) << setfill('0') << timecode.hours;
+ os << setw(2) << setfill('0') << timecode.minutes;
+ os << setw(2) << setfill('0') << timecode.seconds;
+ os << setw(3) << setfill('0') << timecode.frames;
return os.str();
}
-void MackieControlProtocol::update_timecode_display()
+void
+MackieControlProtocol::update_timecode_display()
{
- if ( surface().has_timecode_display() )
+ if (surface().has_timecode_display())
{
// do assignment here so current_frame is fixed
- nframes_t current_frame = session->transport_frame();
+ framepos_t current_frame = session->transport_frame();
string timecode;
- switch ( _timecode_type )
+ switch (_timecode_type)
{
case ARDOUR::AnyTime::BBT:
- timecode = format_bbt_timecode( current_frame );
+ timecode = format_bbt_timecode (current_frame);
break;
- case ARDOUR::AnyTime::SMPTE:
- timecode = format_smpte_timecode( current_frame );
+ case ARDOUR::AnyTime::Timecode:
+ timecode = format_timecode_timecode (current_frame);
break;
default:
ostringstream os;
os << "Unknown timecode: " << _timecode_type;
- throw runtime_error( os.str() );
+ throw runtime_error (os.str());
}
// only write the timecode string to the MCU if it's changed
// since last time. This is to reduce midi bandwidth used.
- if ( timecode != _timecode_last )
+ if (timecode != _timecode_last)
{
- surface().display_timecode( mcu_port(), builder, timecode, _timecode_last );
+ surface().display_timecode (mcu_port(), builder, timecode, _timecode_last);
_timecode_last = timecode;
}
}
}
-void MackieControlProtocol::poll_session_data()
+void
+MackieControlProtocol::poll_session_data()
{
- if ( _active && _automation_last.elapsed() >= 20 )
- {
+ // XXX need to attach this to a timer in the MIDI UI event loop (20msec)
+
+ if (_active) {
// do all currently mapped routes
- for( RouteSignals::iterator it = route_signals.begin(); it != route_signals.end(); ++it )
- {
- update_automation( **it );
+ for (RouteSignals::iterator it = route_signals.begin(); it != route_signals.end(); ++it) {
+ update_automation (**it);
}
// and the master strip
- if ( master_route_signal != 0 )
- {
- update_automation( *master_route_signal );
+ if (master_route_signal != 0) {
+ update_automation (*master_route_signal);
}
update_timecode_display();
-
- _automation_last.start();
}
}
// Transport Buttons
/////////////////////////////////////
-LedState MackieControlProtocol::frm_left_press (Button &)
+LedState
+MackieControlProtocol::frm_left_press (Button &)
{
// can use first_mark_before/after as well
unsigned long elapsed = _frm_left_last.restart();
);
// allow a quick double to go past a previous mark
- if ( session->transport_rolling() && elapsed < 500 && loc != 0 )
+ if (session->transport_rolling() && elapsed < 500 && loc != 0)
{
- Location * loc_two_back = session->locations()->first_location_before ( loc->start() );
- if ( loc_two_back != 0 )
+ Location * loc_two_back = session->locations()->first_location_before (loc->start());
+ if (loc_two_back != 0)
{
loc = loc_two_back;
}
}
// move to the location, if it's valid
- if ( loc != 0 )
+ if (loc != 0)
{
- session->request_locate( loc->start(), session->transport_rolling() );
+ session->request_locate (loc->start(), session->transport_rolling());
}
return on;
}
-LedState MackieControlProtocol::frm_left_release (Button &)
+LedState
+MackieControlProtocol::frm_left_release (Button &)
{
return off;
}
-LedState MackieControlProtocol::frm_right_press (Button &)
+LedState
+MackieControlProtocol::frm_right_press (Button &)
{
// can use first_mark_before/after as well
Location * loc = session->locations()->first_location_after (
session->transport_frame()
);
- if ( loc != 0 ) session->request_locate( loc->start(), session->transport_rolling() );
+ if (loc != 0) session->request_locate (loc->start(), session->transport_rolling());
return on;
}
-LedState MackieControlProtocol::frm_right_release (Button &)
+LedState
+MackieControlProtocol::frm_right_release (Button &)
{
return off;
}
-LedState MackieControlProtocol::stop_press (Button &)
+LedState
+MackieControlProtocol::stop_press (Button &)
{
session->request_stop();
return on;
}
-LedState MackieControlProtocol::stop_release (Button &)
+LedState
+MackieControlProtocol::stop_release (Button &)
{
return session->transport_stopped();
}
-LedState MackieControlProtocol::play_press (Button &)
+LedState
+MackieControlProtocol::play_press (Button &)
{
- session->request_transport_speed( 1.0 );
+ session->request_transport_speed (1.0);
return on;
}
-LedState MackieControlProtocol::play_release (Button &)
+LedState
+MackieControlProtocol::play_release (Button &)
{
return session->transport_rolling();
}
-LedState MackieControlProtocol::record_press (Button &)
+LedState
+MackieControlProtocol::record_press (Button &)
{
- if ( session->get_record_enabled() )
- session->disable_record( false );
- else
+ if (session->get_record_enabled()) {
+ session->disable_record (false);
+ } else {
session->maybe_enable_record();
+ }
return on;
}
-LedState MackieControlProtocol::record_release (Button &)
+LedState
+MackieControlProtocol::record_release (Button &)
{
- if ( session->get_record_enabled() )
- {
- if ( session->transport_rolling() )
+ if (session->get_record_enabled()) {
+ if (session->transport_rolling()) {
return on;
- else
+ } else {
return flashing;
- }
- else
+ }
+ } else {
return off;
+ }
}
-LedState MackieControlProtocol::rewind_press (Button &)
+LedState
+MackieControlProtocol::rewind_press (Button &)
{
- _jog_wheel.push( JogWheel::speed );
- _jog_wheel.transport_direction( -1 );
- session->request_transport_speed( -_jog_wheel.transport_speed() );
+ _jog_wheel.push (JogWheel::speed);
+ _jog_wheel.transport_direction (-1);
+ session->request_transport_speed (-_jog_wheel.transport_speed());
return on;
}
-LedState MackieControlProtocol::rewind_release (Button &)
+LedState
+MackieControlProtocol::rewind_release (Button &)
{
_jog_wheel.pop();
- _jog_wheel.transport_direction( 0 );
- if ( _transport_previously_rolling )
- session->request_transport_speed( 1.0 );
+ _jog_wheel.transport_direction (0);
+ if (_transport_previously_rolling)
+ session->request_transport_speed (1.0);
else
session->request_stop();
return off;
}
-LedState MackieControlProtocol::ffwd_press (Button &)
+LedState
+MackieControlProtocol::ffwd_press (Button &)
{
- _jog_wheel.push( JogWheel::speed );
- _jog_wheel.transport_direction( 1 );
- session->request_transport_speed( _jog_wheel.transport_speed() );
+ _jog_wheel.push (JogWheel::speed);
+ _jog_wheel.transport_direction (1);
+ session->request_transport_speed (_jog_wheel.transport_speed());
return on;
}
-LedState MackieControlProtocol::ffwd_release (Button &)
+LedState
+MackieControlProtocol::ffwd_release (Button &)
{
_jog_wheel.pop();
- _jog_wheel.transport_direction( 0 );
- if ( _transport_previously_rolling )
- session->request_transport_speed( 1.0 );
+ _jog_wheel.transport_direction (0);
+ if (_transport_previously_rolling)
+ session->request_transport_speed (1.0);
else
session->request_stop();
return off;
}
-LedState MackieControlProtocol::loop_press (Button &)
+LedState
+MackieControlProtocol::loop_press (Button &)
{
- session->request_play_loop( !session->get_play_loop() );
+ session->request_play_loop (!session->get_play_loop());
return on;
}
-LedState MackieControlProtocol::loop_release (Button &)
+LedState
+MackieControlProtocol::loop_release (Button &)
{
return session->get_play_loop();
}
-LedState MackieControlProtocol::punch_in_press (Button &)
+LedState
+MackieControlProtocol::punch_in_press (Button &)
{
bool state = !session->config.get_punch_in();
- session->config.set_punch_in( state );
+ session->config.set_punch_in (state);
return state;
}
-LedState MackieControlProtocol::punch_in_release (Button &)
+LedState
+MackieControlProtocol::punch_in_release (Button &)
{
return session->config.get_punch_in();
}
-LedState MackieControlProtocol::punch_out_press (Button &)
+LedState
+MackieControlProtocol::punch_out_press (Button &)
{
bool state = !session->config.get_punch_out();
- session->config.set_punch_out( state );
+ session->config.set_punch_out (state);
return state;
}
-LedState MackieControlProtocol::punch_out_release (Button &)
+LedState
+MackieControlProtocol::punch_out_release (Button &)
{
return session->config.get_punch_out();
}
-LedState MackieControlProtocol::home_press (Button &)
+LedState
+MackieControlProtocol::home_press (Button &)
{
session->goto_start();
return on;
}
-LedState MackieControlProtocol::home_release (Button &)
+LedState
+MackieControlProtocol::home_release (Button &)
{
return off;
}
-LedState MackieControlProtocol::end_press (Button &)
+LedState
+MackieControlProtocol::end_press (Button &)
{
session->goto_end();
return on;
}
-LedState MackieControlProtocol::end_release (Button &)
+LedState
+MackieControlProtocol::end_release (Button &)
{
return off;
}
-LedState MackieControlProtocol::clicking_press (Button &)
+LedState
+MackieControlProtocol::clicking_press (Button &)
{
bool state = !Config->get_clicking();
- Config->set_clicking( state );
+ Config->set_clicking (state);
return state;
}
-LedState MackieControlProtocol::clicking_release (Button &)
+LedState
+MackieControlProtocol::clicking_release (Button &)
{
return Config->get_clicking();
}
LedState MackieControlProtocol::global_solo_press (Button &)
{
bool state = !session->soloing();
- session->set_all_solo ( state );
+ session->set_solo (session->get_routes(), state);
return state;
}
void MackieControlProtocol::notify_parameter_changed (std::string const & p)
{
- if ( p == "punch-in" )
+ if (p == "punch-in")
{
- update_global_button( "punch_in", session->config.get_punch_in() );
+ update_global_button ("punch_in", session->config.get_punch_in());
}
- else if ( p == "punch-out" )
+ else if (p == "punch-out")
{
- update_global_button( "punch_out", session->config.get_punch_out() );
+ update_global_button ("punch_out", session->config.get_punch_out());
}
- else if ( p == "clicking" )
+ else if (p == "clicking")
{
- update_global_button( "clicking", Config->get_clicking() );
+ update_global_button ("clicking", Config->get_clicking());
}
else
{
-#ifdef DEBUG
- cout << "parameter changed: " << p << endl;
-#endif
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("parameter changed: %1\n", p));
}
}
// RouteList is the set of routes that have just been added
-void MackieControlProtocol::notify_route_added( ARDOUR::RouteList & rl )
+void
+MackieControlProtocol::notify_route_added (ARDOUR::RouteList & rl)
{
// currently assigned banks are less than the full set of
// strips, so activate the new strip now.
- if ( route_signals.size() < route_table.size() )
+ if (route_signals.size() < route_table.size())
{
refresh_current_bank();
}
// make sure remote id changes in the new route are handled
typedef ARDOUR::RouteList ARS;
- for ( ARS::iterator it = rl.begin(); it != rl.end(); ++it )
- {
- connections_back = (*it)->RemoteControlIDChanged.connect( ( mem_fun (*this, &MackieControlProtocol::notify_remote_id_changed) ) );
+
+ for (ARS::iterator it = rl.begin(); it != rl.end(); ++it) {
+ (*it)->RemoteControlIDChanged.connect (route_connections, MISSING_INVALIDATOR, ui_bind (&MackieControlProtocol::notify_remote_id_changed, this), midi_ui_context());
}
}
-void MackieControlProtocol::notify_solo_active_changed( bool active )
+void
+MackieControlProtocol::notify_solo_active_changed (bool active)
{
- Button * rude_solo = reinterpret_cast<Button*>( surface().controls_by_name["solo"] );
- mcu_port().write( builder.build_led( *rude_solo, active ? flashing : off ) );
+ Button * rude_solo = reinterpret_cast<Button*> (surface().controls_by_name["solo"]);
+ mcu_port().write (builder.build_led (*rude_solo, active ? flashing : off));
}
-void MackieControlProtocol::notify_remote_id_changed()
+void
+MackieControlProtocol::notify_remote_id_changed()
{
Sorted sorted = get_sorted_routes();
// if a remote id has been moved off the end, we need to shift
// the current bank backwards.
- if ( sorted.size() - _current_initial_bank < route_signals.size() )
+ if (sorted.size() - _current_initial_bank < route_signals.size())
{
// but don't shift backwards past the zeroth channel
- switch_banks( max((Sorted::size_type) 0, sorted.size() - route_signals.size() ) );
+ switch_banks (max((Sorted::size_type) 0, sorted.size() - route_signals.size()));
}
// Otherwise just refresh the current bank
else
// Transport signals
///////////////////////////////////////////
-void MackieControlProtocol::notify_record_state_changed()
+void
+MackieControlProtocol::notify_record_state_changed()
{
// switch rec button on / off / flashing
- Button * rec = reinterpret_cast<Button*>( surface().controls_by_name["record"] );
- mcu_port().write( builder.build_led( *rec, record_release( *rec ) ) );
+ Button * rec = reinterpret_cast<Button*> (surface().controls_by_name["record"]);
+ mcu_port().write (builder.build_led (*rec, record_release (*rec)));
}
-void MackieControlProtocol::notify_transport_state_changed()
+void
+MackieControlProtocol::notify_transport_state_changed()
{
// switch various play and stop buttons on / off
- update_global_button( "play", session->transport_rolling() );
- update_global_button( "stop", !session->transport_rolling() );
- update_global_button( "loop", session->get_play_loop() );
+ update_global_button ("play", session->transport_rolling());
+ update_global_button ("stop", !session->transport_rolling());
+ update_global_button ("loop", session->get_play_loop());
_transport_previously_rolling = session->transport_rolling();
// rec is special because it's tristate
- Button * rec = reinterpret_cast<Button*>( surface().controls_by_name["record"] );
- mcu_port().write( builder.build_led( *rec, record_release( *rec ) ) );
+ Button * rec = reinterpret_cast<Button*> (surface().controls_by_name["record"]);
+ mcu_port().write (builder.build_led (*rec, record_release (*rec)));
}
/////////////////////////////////////
// Bank Switching
/////////////////////////////////////
-LedState MackieControlProtocol::left_press (Button &)
+LedState
+MackieControlProtocol::left_press (Button &)
{
Sorted sorted = get_sorted_routes();
- if ( sorted.size() > route_table.size() )
+ if (sorted.size() > route_table.size())
{
int new_initial = _current_initial_bank - route_table.size();
- if ( new_initial < 0 ) new_initial = 0;
- if ( new_initial != int( _current_initial_bank ) )
+ if (new_initial < 0) new_initial = 0;
+ if (new_initial != int (_current_initial_bank))
{
session->set_dirty();
- switch_banks( new_initial );
+ switch_banks (new_initial);
}
return on;
}
}
-LedState MackieControlProtocol::left_release (Button &)
+LedState
+MackieControlProtocol::left_release (Button &)
{
return off;
}
-LedState MackieControlProtocol::right_press (Button &)
+LedState
+MackieControlProtocol::right_press (Button &)
{
Sorted sorted = get_sorted_routes();
- if ( sorted.size() > route_table.size() )
- {
- uint32_t delta = sorted.size() - ( route_table.size() + _current_initial_bank );
- if ( delta > route_table.size() ) delta = route_table.size();
- if ( delta > 0 )
- {
+ if (sorted.size() > route_table.size()) {
+ uint32_t delta = sorted.size() - (route_table.size() + _current_initial_bank);
+ if (delta > route_table.size()) delta = route_table.size();
+ if (delta > 0) {
session->set_dirty();
- switch_banks( _current_initial_bank + delta );
+ switch_banks (_current_initial_bank + delta);
}
return on;
- }
- else
- {
+ } else {
return flashing;
}
}
-LedState MackieControlProtocol::right_release (Button &)
+LedState
+MackieControlProtocol::right_release (Button &)
{
return off;
}
-LedState MackieControlProtocol::channel_left_press (Button &)
+LedState
+MackieControlProtocol::channel_left_press (Button &)
{
Sorted sorted = get_sorted_routes();
- if ( sorted.size() > route_table.size() )
+ if (sorted.size() > route_table.size())
{
prev_track();
return on;
}
}
-LedState MackieControlProtocol::channel_left_release (Button &)
+LedState
+MackieControlProtocol::channel_left_release (Button &)
{
return off;
}
-LedState MackieControlProtocol::channel_right_press (Button &)
+LedState
+MackieControlProtocol::channel_right_press (Button &)
{
Sorted sorted = get_sorted_routes();
- if ( sorted.size() > route_table.size() )
+ if (sorted.size() > route_table.size())
{
next_track();
return on;
}
}
-LedState MackieControlProtocol::channel_right_release (Button &)
+LedState
+MackieControlProtocol::channel_right_release (Button &)
{
return off;
}
/////////////////////////////////////
// Functions
/////////////////////////////////////
-LedState MackieControlProtocol::marker_press (Button &)
+LedState
+MackieControlProtocol::marker_press (Button &)
{
// cut'n'paste from LocationUI::add_new_location()
string markername;
- nframes_t where = session->audible_frame();
+ framepos_t where = session->audible_frame();
session->locations()->next_available_name(markername,"mcu");
- Location *location = new Location (where, where, markername, Location::IsMark);
+ Location *location = new Location (*session, where, where, markername, Location::IsMark);
session->begin_reversible_command (_("add marker"));
XMLNode &before = session->locations()->get_state();
session->locations()->add (location, true);
return on;
}
-LedState MackieControlProtocol::marker_release (Button &)
+LedState
+MackieControlProtocol::marker_release (Button &)
{
return off;
}
-void jog_wheel_state_display( JogWheel::State state, SurfacePort & port )
+void
+jog_wheel_state_display (JogWheel::State state, SurfacePort & port)
{
- switch( state )
+ switch (state)
{
- case JogWheel::zoom: port.write( builder.two_char_display( "Zm" ) ); break;
- case JogWheel::scroll: port.write( builder.two_char_display( "Sc" ) ); break;
- case JogWheel::scrub: port.write( builder.two_char_display( "Sb" ) ); break;
- case JogWheel::shuttle: port.write( builder.two_char_display( "Sh" ) ); break;
- case JogWheel::speed: port.write( builder.two_char_display( "Sp" ) ); break;
- case JogWheel::select: port.write( builder.two_char_display( "Se" ) ); break;
+ case JogWheel::zoom: port.write (builder.two_char_display ("Zm")); break;
+ case JogWheel::scroll: port.write (builder.two_char_display ("Sc")); break;
+ case JogWheel::scrub: port.write (builder.two_char_display ("Sb")); break;
+ case JogWheel::shuttle: port.write (builder.two_char_display ("Sh")); break;
+ case JogWheel::speed: port.write (builder.two_char_display ("Sp")); break;
+ case JogWheel::select: port.write (builder.two_char_display ("Se")); break;
}
}
-Mackie::LedState MackieControlProtocol::zoom_press( Mackie::Button & )
+Mackie::LedState
+MackieControlProtocol::zoom_press (Mackie::Button &)
{
_jog_wheel.zoom_state_toggle();
- update_global_button( "scrub", _jog_wheel.jog_wheel_state() == JogWheel::scrub );
- jog_wheel_state_display( _jog_wheel.jog_wheel_state(), mcu_port() );
+ update_global_button ("scrub", _jog_wheel.jog_wheel_state() == JogWheel::scrub);
+ jog_wheel_state_display (_jog_wheel.jog_wheel_state(), mcu_port());
return _jog_wheel.jog_wheel_state() == JogWheel::zoom;
}
-Mackie::LedState MackieControlProtocol::zoom_release( Mackie::Button & )
+Mackie::LedState
+MackieControlProtocol::zoom_release (Mackie::Button &)
{
return _jog_wheel.jog_wheel_state() == JogWheel::zoom;
}
-Mackie::LedState MackieControlProtocol::scrub_press( Mackie::Button & )
+Mackie::LedState
+MackieControlProtocol::scrub_press (Mackie::Button &)
{
_jog_wheel.scrub_state_cycle();
- update_global_button( "zoom", _jog_wheel.jog_wheel_state() == JogWheel::zoom );
- jog_wheel_state_display( _jog_wheel.jog_wheel_state(), mcu_port() );
+ update_global_button ("zoom", _jog_wheel.jog_wheel_state() == JogWheel::zoom);
+ jog_wheel_state_display (_jog_wheel.jog_wheel_state(), mcu_port());
return
_jog_wheel.jog_wheel_state() == JogWheel::scrub
||
;
}
-Mackie::LedState MackieControlProtocol::scrub_release( Mackie::Button & )
+Mackie::LedState
+MackieControlProtocol::scrub_release (Mackie::Button &)
{
return
_jog_wheel.jog_wheel_state() == JogWheel::scrub
;
}
-LedState MackieControlProtocol::drop_press (Button &)
+LedState
+MackieControlProtocol::drop_press (Button &)
{
session->remove_last_capture();
return on;
}
-LedState MackieControlProtocol::drop_release (Button &)
+LedState
+MackieControlProtocol::drop_release (Button &)
{
return off;
}
-LedState MackieControlProtocol::save_press (Button &)
+LedState
+MackieControlProtocol::save_press (Button &)
{
- session->save_state( "" );
+ session->save_state ("");
return on;
}
-LedState MackieControlProtocol::save_release (Button &)
+LedState
+MackieControlProtocol::save_release (Button &)
{
return off;
}
-LedState MackieControlProtocol::smpte_beats_press (Button &)
+LedState
+MackieControlProtocol::timecode_beats_press (Button &)
{
- switch ( _timecode_type )
+ switch (_timecode_type)
{
case ARDOUR::AnyTime::BBT:
- _timecode_type = ARDOUR::AnyTime::SMPTE;
+ _timecode_type = ARDOUR::AnyTime::Timecode;
break;
- case ARDOUR::AnyTime::SMPTE:
+ case ARDOUR::AnyTime::Timecode:
_timecode_type = ARDOUR::AnyTime::BBT;
break;
default:
ostringstream os;
os << "Unknown Anytime::Type " << _timecode_type;
- throw runtime_error( os.str() );
+ throw runtime_error (os.str());
}
- update_smpte_beats_led();
+ update_timecode_beats_led();
return on;
}
-LedState MackieControlProtocol::smpte_beats_release( Button & )
+LedState
+MackieControlProtocol::timecode_beats_release (Button &)
{
return off;
}
+
+list<boost::shared_ptr<ARDOUR::Bundle> >
+MackieControlProtocol::bundles ()
+{
+ list<boost::shared_ptr<ARDOUR::Bundle> > b;
+ b.push_back (_input_bundle);
+ b.push_back (_output_bundle);
+ return b;
+}
projects / ardour.git / blobdiff