#include "ardour/panner.h"
#include "ardour/panner_shell.h"
#include "ardour/profile.h"
+#include "ardour/record_enable_control.h"
#include "ardour/route.h"
#include "ardour/route_group.h"
#include "ardour/session.h"
using namespace ArdourSurface;
using namespace Mackie;
-#include "i18n.h"
+#include "pbd/i18n.h"
#include "pbd/abstract_ui.cc" // instantiate template
_last_bank[i] = 0;
}
- StripableSelectionChanged.connect (gui_connections, MISSING_INVALIDATOR, boost::bind (&MackieControlProtocol::gui_track_selection_changed, this, _1, true), this);
+ PresentationInfo::Change.connect (gui_connections, MISSING_INVALIDATOR, boost::bind (&MackieControlProtocol::notify_presentation_info_changed, this), this);
_instance = this;
{
bool operator () (const boost::shared_ptr<Stripable> & a, const boost::shared_ptr<Stripable> & b) const
{
- return a->presentation_info() < b->presentation_info();
+ return a->presentation_info().order() < b->presentation_info().order();
}
bool operator () (const Stripable & a, const Stripable & b) const
{
- return a.presentation_info() < b.presentation_info();
+ return a.presentation_info().order() < b.presentation_info().order();
}
bool operator () (const Stripable * a, const Stripable * b) const
{
- return a->presentation_info() < b->presentation_info();
+ return a->presentation_info().order() < b->presentation_info().order();
}
};
switch (_view_mode) {
case Mixer:
- if (!is_hidden (s)) {
+ if (!s->presentation_info().hidden()) {
sorted.push_back (s);
}
break;
case AudioTracks:
- if (is_audio_track(s) && !is_hidden(s)) {
+ if (is_audio_track(s) && !s->presentation_info().hidden()) {
sorted.push_back (s);
}
break;
}
#endif
} else {
- if (!is_track(s) && !is_hidden(s)) {
+ if (!is_track(s) && !s->presentation_info().hidden()) {
sorted.push_back (s);
}
}
break;
case MidiTracks:
- if (is_midi_track(s) && !is_hidden(s)) {
+ if (is_midi_track(s) && !s->presentation_info().hidden()) {
sorted.push_back (s);
}
break;
break;
case Auxes: // in ardour, for now aux and buss are same. for mixbus, "Busses" are mixbuses, "Auxes" are ardour buses
#ifdef MIXBUS
- if (!s->mixbus() && !is_track() && !is_hidden(s))
+ if (!s->mixbus() && !is_track() && !s->presentation_info().hidden())
#else
- if (!is_track(s) && !is_hidden(s))
+ if (!is_track(s) && !s->presentation_info().hidden())
#endif
{
sorted.push_back (s);
}
break;
case Hidden: // Show all the tracks we have hidden
- if (is_hidden(s)) {
+ if (s->presentation_info().hidden()) {
// maybe separate groups
sorted.push_back (s);
}
break;
case Selected: // For example: a group (this is USER)
- if (selected(s) && !is_hidden(s)) {
+ if (s->presentation_info().selected() && !s->presentation_info().hidden()) {
sorted.push_back (s);
}
break;
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("clear all strips, bank target %1 is outside route range %2\n",
_current_initial_bank, sorted.size()));
for (Surfaces::iterator si = surfaces.begin(); si != surfaces.end(); ++si) {
- vector<boost::shared_ptr<Route> > routes;
- /* pass in an empty route list, so that all strips will be reset */
- (*si)->map_routes (routes);
+ vector<boost::shared_ptr<Stripable> > stripables;
+ /* pass in an empty stripables list, so that all strips will be reset */
+ (*si)->map_stripables (stripables);
}
return -1;
}
- /* make sure selection is correct */
-
- _gui_track_selection_changed (&_last_selected_stripables, false, false);
-
/* current bank has not been saved */
session->set_dirty();
// make sure remote id changed signals reach here
// see also notify_stripable_added
Sorted sorted = get_sorted_stripables();
-
- for (Sorted::iterator it = sorted.begin(); it != sorted.end(); ++it) {
- (*it)->PresentationInfoChanged.connect (stripable_connections, MISSING_INVALIDATOR, boost::bind (&MackieControlProtocol::notify_presentation_info_changed, this), this);
- }
}
void
refresh_current_bank();
// otherwise route added, but current bank needs no updating
-
- // make sure presentation info changes in the new stripables are handled
- typedef ARDOUR::RouteList ARS;
-
- for (ARS::iterator it = rl.begin(); it != rl.end(); ++it) {
- (*it)->PresentationInfoChanged.connect (stripable_connections, MISSING_INVALIDATOR, boost::bind (&MackieControlProtocol::notify_presentation_info_changed, this), this);
- }
}
void
}
void
-MackieControlProtocol::notify_presentation_info_changed()
+MackieControlProtocol::notify_presentation_info_changed ()
{
{
Glib::Threads::Mutex::Lock lm (surfaces_lock);
if (ioc & IO_IN) {
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("something happend on %1\n", port->name()));
+ // DEBUG_TRACE (DEBUG::MackieControl, string_compose ("something happend on %1\n", port->name()));
/* Devices using regular JACK MIDI ports will need to have
the x-thread FIFO drained to avoid burning endless CPU.
}
}
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("data available on %1\n", port->name()));
+ // DEBUG_TRACE (DEBUG::MackieControl, string_compose ("data available on %1\n", port->name()));
framepos_t now = session->engine().sample_time();
port->parse (now);
}
int
MackieControlProtocol::set_subview_mode (SubViewMode sm, boost::shared_ptr<Stripable> r)
{
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("set subview mode %1 with stripable %2, current flip mode %3\n", sm, (r ? r->name() : string ("null")), _flip_mode));
+
if (_flip_mode != Normal) {
set_flip_mode (Normal);
}
if (!subview_mode_would_be_ok (sm, r)) {
+ DEBUG_TRACE (DEBUG::MackieControl, "subview mode not OK\n");
+
if (r) {
Glib::Threads::Mutex::Lock lm (surfaces_lock);
_subview_mode = sm;
_subview_stripable = r;
- if (_subview_route != old_stripable) {
- subview_route_connections.drop_connections ();
+ if (_subview_stripable != old_stripable) {
+ subview_stripable_connections.drop_connections ();
/* Catch the current subview stripable going away */
if (_subview_stripable) {
}
}
-void
-MackieControlProtocol::gui_track_selection_changed (ARDOUR::StripableNotificationListPtr rl, bool save_list)
-{
- _gui_track_selection_changed (rl.get(), save_list, true);
-}
-
-void
-MackieControlProtocol::_gui_track_selection_changed (ARDOUR::StripableNotificationList* rl, bool save_list, bool gui_selection_did_change)
-{
- /* We need to keep a list of the most recently selected routes around,
- but we are not allowed to keep shared_ptr<Stripable> unless we want to
- handle the complexities of route deletion. So instead, the GUI sends
- us a notification using weak_ptr<Stripable>, which we keep a copy
- of. For efficiency's sake, however, we convert the weak_ptr's into
- shared_ptr<Stripable> before passing them to however many surfaces (and
- thus strips) that we have.
- */
-
- StrongStripableNotificationList srl;
-
- for (ARDOUR::StripableNotificationList::const_iterator i = rl->begin(); i != rl->end(); ++i) {
- boost::shared_ptr<ARDOUR::Stripable> r = (*i).lock();
- if (r) {
- srl.push_back (r);
- }
- }
-
- {
- Glib::Threads::Mutex::Lock lm (surfaces_lock);
-
- for (Surfaces::iterator s = surfaces.begin(); s != surfaces.end(); ++s) {
- (*s)->gui_selection_changed (srl);
- }
- }
-
- if (save_list) {
- _last_selected_stripables = *rl;
- }
-
- if (gui_selection_did_change) {
-
- check_fader_automation_state ();
-
- /* note: this method is also called when we switch banks.
- * But ... we don't allow bank switching when in subview mode.
- *
- * so .. we only have to care about subview mode if the
- * GUI selection has changed.
- *
- * It is possible that first_selected_stripable() may return null if we
- * are no longer displaying/mapping that route. In that case,
- * we will exit subview mode. If first_selected_stripable() is
- * null, and subview mode is not None, then the first call to
- * set_subview_mode() will fail, and we will reset to None.
- */
-
- if (set_subview_mode (_subview_mode, first_selected_stripable())) {
- set_subview_mode (None, boost::shared_ptr<Stripable>());
- }
- }
-}
-
void
MackieControlProtocol::check_fader_automation_state ()
{
}
void
-MackieControlProtocol::select_range ()
+MackieControlProtocol::select_range (uint32_t pressed)
{
StripableList stripables;
- pull_stripable_range (_down_select_buttons, stripables);
+ pull_stripable_range (_down_select_buttons, stripables, pressed);
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("select range: found %1 stripables\n", stripables.size()));
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("select range: found %1 stripables, first = %2\n", stripables.size(), stripables.front()->name()));
if (stripables.empty()) {
return;
}
- for (StripableList::iterator s = stripables.begin(); s != stripables.end(); ++s) {
+ if (stripables.size() == 1 && ControlProtocol::last_selected().size() == 1 && stripables.front()->presentation_info().selected()) {
+ /* cancel selection for one and only selected stripable */
+ ToggleStripableSelection (stripables.front());
+ } else {
+ for (StripableList::iterator s = stripables.begin(); s != stripables.end(); ++s) {
- if (main_modifier_state() == MODIFIER_SHIFT) {
- /* XXX can only use numeric part of ID at present */
- ToggleStripableSelection ((*s)->presentation_info ().global_order());
- } else {
- if (s == stripables.begin()) {
- /* XXX can only use numeric part of ID at present */
- SetStripableSelection ((*s)->presentation_info().global_order());
+ if (main_modifier_state() == MODIFIER_SHIFT) {
+ ToggleStripableSelection (*s);
} else {
- /* XXX can only use numeric part of ID at present */
- AddStripableToSelection ((*s)->presentation_info().global_order());
+ if (s == stripables.begin()) {
+ SetStripableSelection (*s);
+ } else {
+ AddStripableToSelection (*s);
+ }
}
}
}
}
MackieControlProtocol::ControlList
-MackieControlProtocol::down_controls (AutomationType p)
+MackieControlProtocol::down_controls (AutomationType p, uint32_t pressed)
{
ControlList controls;
StripableList stripables;
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("looking for down buttons for %1, got %2\n",
p, m->second.size()));
- pull_stripable_range (m->second, stripables);
+ pull_stripable_range (m->second, stripables, pressed);
switch (p) {
case GainAutomation:
break;
case RecEnableAutomation:
for (StripableList::iterator s = stripables.begin(); s != stripables.end(); ++s) {
- boost::shared_ptr<AutomationControl> ac = (*s)->recenable_control();
+ boost::shared_ptr<AutomationControl> ac = (*s)->rec_enable_control();
if (ac) {
controls.push_back (ac);
}
};
void
-MackieControlProtocol::pull_stripable_range (DownButtonList& down, StripableList& selected)
+MackieControlProtocol::pull_stripable_range (DownButtonList& down, StripableList& selected, uint32_t pressed)
{
ButtonRangeSorter cmp;
(*s)->number(), fs, ls));
for (uint32_t n = fs; n < ls; ++n) {
- boost::shared_ptr<Stripable> r = (*s)->nth_strip (n)->stripable();
+ Strip* strip = (*s)->nth_strip (n);
+ boost::shared_ptr<Stripable> r = strip->stripable();
if (r) {
- selected.push_back (r);
+ if (global_index_locked (*strip) == pressed) {
+ selected.push_front (r);
+ } else {
+ selected.push_back (r);
+ }
}
}
}
}
+
}
void
}
bool
-MackieControlProtocol::selected (boost::shared_ptr<Stripable> r) const
+MackieControlProtocol::is_mapped (boost::shared_ptr<Stripable> r) const
{
- const StripableNotificationList* rl = &_last_selected_stripables;
+ Glib::Threads::Mutex::Lock lm (surfaces_lock);
- for (ARDOUR::StripableNotificationList::const_iterator i = rl->begin(); i != rl->end(); ++i) {
- boost::shared_ptr<ARDOUR::Stripable> rt = (*i).lock();
- if (rt == r) {
+ for (Surfaces::const_iterator s = surfaces.begin(); s != surfaces.end(); ++s) {
+ if ((*s)->stripable_is_mapped (r)) {
return true;
}
}
+
return false;
}
-bool
-MackieControlProtocol::is_hidden (boost::shared_ptr<Stripable> r) const
+void
+MackieControlProtocol::update_selected (boost::shared_ptr<Stripable> s, bool became_selected)
{
- if (!r) {
- return false;
- }
- return (r->presentation_info().flags() & PresentationInfo::Hidden);
-}
+ if (became_selected) {
-bool
-MackieControlProtocol::is_mapped (boost::shared_ptr<Stripable> r) const
-{
- Glib::Threads::Mutex::Lock lm (surfaces_lock);
+ check_fader_automation_state ();
- for (Surfaces::const_iterator s = surfaces.begin(); s != surfaces.end(); ++s) {
- if ((*s)->stripable_is_mapped (r)) {
- return true;
+ /* It is possible that first_selected_route() may return null if we
+ * are no longer displaying/mapping that route. In that case,
+ * we will exit subview mode. If first_selected_route() is
+ * null, and subview mode is not None, then the first call to
+ * set_subview_mode() will fail, and we will reset to None.
+ */
+
+ if (set_subview_mode (_subview_mode, first_selected_stripable())) {
+ set_subview_mode (None, boost::shared_ptr<Stripable>());
}
- }
- return false;
+ }
}
boost::shared_ptr<Stripable>
MackieControlProtocol::first_selected_stripable () const
{
- if (_last_selected_stripables.empty()) {
- return boost::shared_ptr<Stripable>();
- }
+ boost::shared_ptr<Stripable> s = ControlProtocol::first_selected_stripable();
- boost::shared_ptr<Stripable> r = _last_selected_stripables.front().lock();
-
- if (r) {
+ if (s) {
/* check it is on one of our surfaces */
- if (is_mapped (r)) {
- return r;
+ if (is_mapped (s)) {
+ return s;
}
/* stripable is not mapped. thus, the currently selected stripable is
* no currently selected stripable.
*/
- r.reset ();
+ s.reset ();
}
- return r; /* may be null */
+ return s; /* may be null */
}
boost::shared_ptr<Stripable>
MackieControlProtocol::global_index (Strip& strip)
{
Glib::Threads::Mutex::Lock lm (surfaces_lock);
+ return global_index_locked (strip);
+}
+
+uint32_t
+MackieControlProtocol::global_index_locked (Strip& strip)
+{
uint32_t global = 0;
for (Surfaces::const_iterator s = surfaces.begin(); s != surfaces.end(); ++s) {
projects / ardour.git / blobdiff