*/
#include <sstream>
+#include <vector>
+#include <climits>
+
#include <stdint.h>
-#include "strip.h"
#include <sys/time.h>
#include "ardour/debug.h"
#include "ardour/midi_ui.h"
#include "ardour/meter.h"
+#include "ardour/monitor_control.h"
#include "ardour/plugin_insert.h"
#include "ardour/pannable.h"
#include "ardour/panner.h"
#include "ardour/panner_shell.h"
+#include "ardour/phase_control.h"
#include "ardour/rc_configuration.h"
#include "ardour/route.h"
#include "ardour/session.h"
#include "ardour/send.h"
+#include "ardour/solo_isolate_control.h"
#include "ardour/track.h"
#include "ardour/midi_track.h"
#include "ardour/user_bundle.h"
#include "mackie_control_protocol.h"
#include "surface_port.h"
#include "surface.h"
+#include "strip.h"
#include "button.h"
#include "led.h"
#include "pot.h"
, _controls_locked (false)
, _transport_is_rolling (false)
, _metering_active (true)
- , _block_vpot_mode_redisplay_until (0)
, _block_screen_redisplay_until (0)
+ , return_to_vpot_mode_display_at (UINT64_MAX)
+ , eq_band (-1)
, _pan_mode (PanAzimuthAutomation)
- , _trim_mode (TrimAutomation)
, _last_gain_position_written (-1.0)
, _last_pan_azi_position_written (-1.0)
, _last_pan_width_position_written (-1.0)
, _last_trim_position_written (-1.0)
- , _current_send (0)
- , redisplay_requests (256)
{
_fader = dynamic_cast<Fader*> (Fader::factory (*_surface, index, "fader", *this));
_vpot = dynamic_cast<Pot*> (Pot::factory (*_surface, Pot::ID + index, "vpot", *this));
_route = r;
- control_by_parameter.clear ();
-
- control_by_parameter[PanAzimuthAutomation] = (Control*) 0;
- control_by_parameter[PanWidthAutomation] = (Control*) 0;
- control_by_parameter[PanElevationAutomation] = (Control*) 0;
- control_by_parameter[PanFrontBackAutomation] = (Control*) 0;
- control_by_parameter[PanLFEAutomation] = (Control*) 0;
- control_by_parameter[GainAutomation] = (Control*) 0;
- control_by_parameter[TrimAutomation] = (Control*) 0;
- control_by_parameter[PhaseAutomation] = (Control*) 0;
- control_by_parameter[SendAutomation] = (Control*) 0;
-
reset_saved_values ();
if (!r) {
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Surface %1 Strip %2 mapped to null route\n", _surface->number(), _index));
zero ();
return;
}
_solo->set_control (_route->solo_control());
_mute->set_control (_route->mute_control());
- _route->solo_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
- _route->listen_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
-
+ _route->solo_control()->Changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_solo_changed, this), ui_context());
_route->mute_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_mute_changed, this), ui_context());
- if (_route->trim() && route()->trim()->active()) {
- _route->trim_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trim_changed, this, false), ui_context());
+ boost::shared_ptr<AutomationControl> pan_control = _route->pan_azimuth_control();
+ if (pan_control) {
+ pan_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_azi_changed, this, false), ui_context());
}
- if (_route->phase_invert().size()) {
- _route->phase_invert_changed.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_phase_changed, this, false), ui_context());
- _route->phase_control()->set_channel(0);
+ pan_control = _route->pan_width_control();
+ if (pan_control) {
+ pan_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_width_changed, this, false), ui_context());
}
- boost::shared_ptr<Pannable> pannable = _route->pannable();
-
-if(Profile->get_mixbus()) {
- const uint32_t port_channel_post_pan = 2; // gtk2_ardour/mixbus_ports.h
- boost::shared_ptr<ARDOUR::PluginInsert> plug = _route->ch_post();
- mb_pan_controllable = boost::dynamic_pointer_cast<ARDOUR::AutomationControl> (plug->control (Evoral::Parameter (ARDOUR::PluginAutomation, 0, port_channel_post_pan)));
-
- mb_pan_controllable->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_azi_changed, this, false), ui_context());
-} else {
- if (pannable && _route->panner()) {
- pannable->pan_azimuth_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_azi_changed, this, false), ui_context());
- pannable->pan_width_control->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_panner_width_changed, this, false), ui_context());
- }
-}
-
_route->gain_control()->Changed.connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_gain_changed, this, false), ui_context());
_route->PropertyChanged.connect (route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_property_changed, this, _1), ui_context());
if (trk) {
_recenable->set_control (trk->rec_enable_control());
trk->rec_enable_control()->Changed .connect(route_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_record_enable_changed, this), ui_context());
-
-
}
// TODO this works when a currently-banked route is made inactive, but not
possible_pot_parameters.clear();
-if (Profile->get_mixbus()) {
- possible_pot_parameters.push_back (PanAzimuthAutomation);
-} else {
- if (pannable) {
- boost::shared_ptr<Panner> panner = _route->panner();
- if (panner) {
- set<Evoral::Parameter> automatable = panner->what_can_be_automated ();
- set<Evoral::Parameter>::iterator a;
-
- if ((a = automatable.find (PanAzimuthAutomation)) != automatable.end()) {
- possible_pot_parameters.push_back (PanAzimuthAutomation);
- }
-
- if ((a = automatable.find (PanWidthAutomation)) != automatable.end()) {
- possible_pot_parameters.push_back (PanWidthAutomation);
- }
- }
+ if (_route->pan_azimuth_control()) {
+ possible_pot_parameters.push_back (PanAzimuthAutomation);
}
-}
-
- if (_route->trim() && route()->trim()->active()) {
- possible_pot_parameters.push_back (TrimAutomation);
+ if (_route->pan_width_control()) {
+ possible_pot_parameters.push_back (PanWidthAutomation);
+ }
+ if (_route->pan_elevation_control()) {
+ possible_pot_parameters.push_back (PanElevationAutomation);
+ }
+ if (_route->pan_frontback_control()) {
+ possible_pot_parameters.push_back (PanFrontBackAutomation);
+ }
+ if (_route->pan_lfe_control()) {
+ possible_pot_parameters.push_back (PanLFEAutomation);
}
- possible_trim_parameters.clear();
+ _pan_mode = PanAzimuthAutomation;
- if (_route->trim() && route()->trim()->active()) {
- possible_trim_parameters.push_back (TrimAutomation);
- _trim_mode = TrimAutomation;
+ if (_surface->mcp().subview_mode() == MackieControlProtocol::None) {
+ set_vpot_parameter (_pan_mode);
}
- if (_route->phase_invert().size()) {
- possible_trim_parameters.push_back (PhaseAutomation);
- _route->phase_control()->set_channel(0);
- if (_trim_mode != TrimAutomation) {
- _trim_mode = PhaseAutomation;
- }
- }
- _current_send = 0;
- /* Update */
- _pan_mode = PanAzimuthAutomation;
- potmode_changed (false);
- notify_all ();
+ _fader->set_control (_route->gain_control());
+ notify_all ();
}
void
zero ();
return;
}
+ // The active V-pot control may not be active for this strip
+ // But if we zero it in the controls function it may erase
+ // the one we do want
+ _surface->write (_vpot->zero());
notify_solo_changed ();
notify_mute_changed ();
notify_panner_azi_changed ();
notify_panner_width_changed ();
notify_record_enable_changed ();
- notify_trim_changed ();
- notify_phase_changed ();
notify_processor_changed ();
}
Strip::notify_solo_changed ()
{
if (_route && _solo) {
- _surface->write (_solo->set_state ((_route->soloed() || _route->listening_via_monitor()) ? on : off));
+ _surface->write (_solo->set_state (_route->soloed() ? on : off));
}
}
Strip::notify_record_enable_changed ()
{
if (_route && _recenable) {
- _surface->write (_recenable->set_state (_route->record_enabled() ? on : off));
+ boost::shared_ptr<Track> trk = boost::dynamic_pointer_cast<Track> (_route);
+ if (trk) {
+ _surface->write (_recenable->set_state (trk->rec_enable_control()->get_value() ? on : off));
+ }
}
}
void
Strip::notify_gain_changed (bool force_update)
{
- if (_route) {
+ if (!_route) {
+ return;
+ }
- Control* control;
+ boost::shared_ptr<AutomationControl> ac = _route->gain_control();
+ Control* control;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- control = _vpot;
- } else {
- control = _fader;
- }
+ if (!ac) {
+ /* doesn't seem possible but lets be safe */
+ return;
+ }
- boost::shared_ptr<AutomationControl> ac = _route->gain_control();
+ /* track gain control could be on vpot or fader, depending in
+ * flip mode.
+ */
- float gain_coefficient = ac->get_value();
- float normalized_position = ac->internal_to_interface (gain_coefficient);
+ if (_vpot->control() == ac) {
+ control = _vpot;
+ } else if (_fader->control() == ac) {
+ control = _fader;
+ } else {
+ return;
+ }
+ float gain_coefficient = ac->get_value();
+ float normalized_position = ac->internal_to_interface (gain_coefficient);
- if (force_update || normalized_position != _last_gain_position_written) {
+ if (force_update || normalized_position != _last_gain_position_written) {
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- if (!control->in_use()) {
- _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
- }
- queue_parameter_display (GainAutomation, gain_coefficient);
+ if (!control->in_use()) {
+ if (control == _vpot) {
+ _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
} else {
- if (!control->in_use()) {
- _surface->write (_fader->set_position (normalized_position));
- }
- queue_parameter_display (GainAutomation, gain_coefficient);
+ _surface->write (_fader->set_position (normalized_position));
}
-
- _last_gain_position_written = normalized_position;
}
+
+ do_parameter_display (GainAutomation, gain_coefficient);
+ _last_gain_position_written = normalized_position;
}
}
void
-Strip::notify_trim_changed (bool force_update)
+Strip::notify_processor_changed (bool force_update)
{
- if (_route) {
+}
- if (!_route->trim() || !route()->trim()->active()) {
- _surface->write (_vpot->zero());
- return;
- }
- Control* control = 0;
- ControlParameterMap::iterator i = control_by_parameter.find (TrimAutomation);
+void
+Strip::notify_property_changed (const PropertyChange& what_changed)
+{
+ if (!what_changed.contains (ARDOUR::Properties::name)) {
+ return;
+ }
- if (i == control_by_parameter.end()) {
- return;
- }
+ show_route_name ();
+}
- control = i->second;
+void
+Strip::show_route_name ()
+{
+ MackieControlProtocol::SubViewMode svm = _surface->mcp().subview_mode();
- boost::shared_ptr<AutomationControl> ac = _route->trim_control();
+ if (svm != MackieControlProtocol::None) {
+ /* subview mode is responsible for upper line */
+ return;
+ }
- float gain_coefficient = ac->get_value();
- float normalized_position = ac->internal_to_interface (gain_coefficient);
+ string fullname = string();
+ if (!_route) {
+ fullname = string();
+ } else {
+ fullname = _route->name();
+ }
- if (force_update || normalized_position != _last_trim_position_written) {
- if (control == _fader) {
- if (!_fader->in_use()) {
- _surface->write (_fader->set_position (normalized_position));
- queue_parameter_display (TrimAutomation, gain_coefficient);
- }
- } else if (control == _vpot) {
- _surface->write (_vpot->set (normalized_position, true, Pot::dot));
- queue_parameter_display (TrimAutomation, gain_coefficient);
- }
- _last_trim_position_written = normalized_position;
- }
+ if (fullname.length() <= 6) {
+ pending_display[0] = fullname;
+ } else {
+ pending_display[0] = PBD::short_version (fullname, 6);
}
}
void
-Strip::notify_phase_changed (bool force_update)
+Strip::notify_send_level_change (AutomationType type, uint32_t send_num, bool force_update)
{
- if (_route) {
- if (!_route->phase_invert().size()) {
- _surface->write (_vpot->zero());
- return;
- }
+ boost::shared_ptr<Route> r = _surface->mcp().subview_route();
- Control* control = 0;
- ControlParameterMap::iterator i = control_by_parameter.find (PhaseAutomation);
+ if (!r) {
+ /* not in subview mode */
+ return;
+ }
- if (i == control_by_parameter.end()) {
- return;
- }
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::Sends) {
+ /* no longer in Sends subview mode */
+ return;
+ }
- control = i->second;
+ boost::shared_ptr<AutomationControl> control = r->send_level_controllable (send_num);
+ if (!control) {
+ return;
+ }
- float normalized_position = _route->phase_control()->get_value();
+ if (control) {
+ float val = control->get_value();
+ do_parameter_display (type, val);
- if (control == _fader) {
- if (!_fader->in_use()) {
- _surface->write (_fader->set_position (normalized_position));
- queue_parameter_display (PhaseAutomation, normalized_position);
- }
- } else if (control == _vpot) {
- _surface->write (_vpot->set (normalized_position, true, Pot::wrap));
- queue_parameter_display (PhaseAutomation, normalized_position);
+ if (_vpot->control() == control) {
+ /* update pot/encoder */
+ _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
}
}
}
void
-Strip::notify_processor_changed (bool force_update)
+Strip::notify_trackview_change (AutomationType type, uint32_t send_num, bool force_update)
{
- if (_route) {
- boost::shared_ptr<Processor> p = _route->nth_send (_current_send);
- if (!p) {
- _surface->write (_vpot->zero());
- return;
- }
+ boost::shared_ptr<Route> r = _surface->mcp().subview_route();
- Control* control = 0;
- ControlParameterMap::iterator i = control_by_parameter.find (SendAutomation);
+ if (!r) {
+ /* not in subview mode */
+ return;
+ }
- if (i == control_by_parameter.end()) {
- return;
- }
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::TrackView) {
+ /* no longer in TrackViewsubview mode */
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> control;
+ boost::shared_ptr<Track> track = boost::dynamic_pointer_cast<Track> (r);
- control = i->second;
+ switch (type) {
+ case TrimAutomation:
+ control = r->trim_control();
+ break;
+ case SoloIsolateAutomation:
+ control = r->solo_isolate_control ();
+ break;
+ case SoloSafeAutomation:
+ control = r->solo_safe_control ();
+ break;
+ case MonitoringAutomation:
+ if (track) {
+ control = track->monitoring_control();
+ }
+ break;
+ case PhaseAutomation:
+ control = r->phase_control ();
+ break;
+ default:
+ break;
+ }
- boost::shared_ptr<Send> s = boost::dynamic_pointer_cast<Send>(p);
- boost::shared_ptr<Amp> a = s->amp();
- boost::shared_ptr<AutomationControl> ac = a->gain_control();
+ if (control) {
+ float val = control->get_value();
- float gain_coefficient = ac->get_value();
- float normalized_position = ac->internal_to_interface (gain_coefficient);
+ /* Note: all of the displayed controllables require the display
+ * of their *actual* ("internal") value, not the version mapped
+ * into the normalized 0..1.0 ("interface") range.
+ */
- if (control == _fader) {
- if (!_fader->in_use()) {
- _surface->write (_fader->set_position (normalized_position));
- queue_parameter_display (SendAutomation, gain_coefficient);
- }
- } else if (control == _vpot) {
- _surface->write (_vpot->set (normalized_position, true, Pot::dot));
- queue_parameter_display (SendAutomation, gain_coefficient);
- }
+ do_parameter_display (type, val);
+ /* update pot/encoder */
+ _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
}
}
void
-Strip::notify_property_changed (const PropertyChange& what_changed)
+Strip::notify_eq_change (AutomationType type, uint32_t band, bool force_update)
{
- if (!what_changed.contains (ARDOUR::Properties::name)) {
+ boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+
+ if (!r) {
+ /* not in subview mode */
return;
}
- show_route_name ();
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::EQ) {
+ /* no longer in EQ subview mode */
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> control;
+
+ switch (type) {
+ case EQGain:
+ control = r->eq_gain_controllable (band);
+ break;
+ case EQFrequency:
+ control = r->eq_freq_controllable (band);
+ break;
+ case EQQ:
+ control = r->eq_q_controllable (band);
+ break;
+ case EQShape:
+ control = r->eq_shape_controllable (band);
+ break;
+ case EQHPF:
+ control = r->eq_hpf_controllable ();
+ break;
+ case EQEnable:
+ control = r->eq_enable_controllable ();
+ break;
+ default:
+ break;
+ }
+
+ if (control) {
+ float val = control->get_value();
+ do_parameter_display (type, val);
+ /* update pot/encoder */
+ _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
+ }
}
void
-Strip::show_route_name ()
+Strip::notify_dyn_change (AutomationType type, bool force_update, bool propagate_mode)
{
- if (!_route) {
+ boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+
+ if (!r) {
+ /* not in subview mode */
return;
}
- string line1;
- string fullname = _route->name();
- if (fullname.length() <= 6) {
- line1 = fullname;
- } else {
- line1 = PBD::short_version (fullname, 6);
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::Dynamics) {
+ /* no longer in EQ subview mode */
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> control;
+ bool reset_all = false;
+
+ switch (type) {
+ case CompThreshold:
+ control = r->comp_threshold_controllable ();
+ break;
+ case CompSpeed:
+ control = r->comp_speed_controllable ();
+ break;
+ case CompMode:
+ control = r->comp_mode_controllable ();
+ reset_all = true;
+ break;
+ case CompMakeup:
+ control = r->comp_makeup_controllable ();
+ break;
+ case CompRedux:
+ control = r->comp_redux_controllable ();
+ break;
+ case CompEnable:
+ control = r->comp_enable_controllable ();
+ break;
+ default:
+ break;
+ }
+
+ if (propagate_mode && reset_all) {
+ _surface->subview_mode_changed ();
}
- _surface->write (display (0, line1));
+ if (control) {
+ float val = control->get_value();
+ do_parameter_display (type, val);
+ /* update pot/encoder */
+ _surface->write (_vpot->set (control->internal_to_interface (val), true, Pot::wrap));
+ }
}
void
Strip::notify_panner_azi_changed (bool force_update)
{
- if (_route) {
-
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan change for strip %1\n", _index));
-
- boost::shared_ptr<Pannable> pannable = _route->pannable();
+ if (!_route) {
+ return;
+ }
- if (!pannable || !_route->panner()) {
- _surface->write (_vpot->zero());
- return;
- }
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan change for strip %1\n", _index));
- Control* control = 0;
- ControlParameterMap::iterator i = control_by_parameter.find (PanAzimuthAutomation);
+ boost::shared_ptr<AutomationControl> pan_control = _route->pan_azimuth_control ();
- if (i == control_by_parameter.end()) {
- return;
- }
+ if (!pan_control) {
+ /* basically impossible, since we're here because that control
+ * changed, but sure, whatever.
+ */
+ return;
+ }
- control = i->second;
+ if (_vpot->control() != pan_control) {
+ return;
+ }
- double pos = mb_pan_controllable->internal_to_interface (mb_pan_controllable->get_value());
+ double normalized_pos = pan_control->internal_to_interface (pan_control->get_value());
+ double internal_pos = pan_control->get_value();
- if (force_update || pos != _last_pan_azi_position_written) {
+ if (force_update || (normalized_pos != _last_pan_azi_position_written)) {
- if (control == _fader) {
- if (!_fader->in_use()) {
- _surface->write (_fader->set_position (pos));
- queue_parameter_display (PanAzimuthAutomation, pos);
- }
- } else if (control == _vpot) {
- _surface->write (_vpot->set (pos, true, Pot::dot));
- queue_parameter_display (PanAzimuthAutomation, pos);
- }
+ _surface->write (_vpot->set (normalized_pos, true, Pot::dot));
+ /* show actual internal value to user */
+ do_parameter_display (PanAzimuthAutomation, internal_pos);
- _last_pan_azi_position_written = pos;
- }
+ _last_pan_azi_position_written = normalized_pos;
}
}
void
Strip::notify_panner_width_changed (bool force_update)
{
- if (_route) {
-
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan width change for strip %1\n", _index));
-
- boost::shared_ptr<Pannable> pannable = _route->pannable();
-
- if (!pannable || !_route->panner()) {
- _surface->write (_vpot->zero());
- return;
- }
-
- Control* control = 0;
- ControlParameterMap::iterator i = control_by_parameter.find (PanWidthAutomation);
+ if (!_route) {
+ return;
+ }
- if (i == control_by_parameter.end()) {
- return;
- }
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("pan width change for strip %1\n", _index));
- control = i->second;
+ boost::shared_ptr<AutomationControl> pan_control = _route->pan_width_control ();
- double pos = pannable->pan_width_control->internal_to_interface (pannable->pan_width_control->get_value());
+ if (!pan_control) {
+ /* basically impossible, since we're here because that control
+ * changed, but sure, whatever.
+ */
+ return;
+ }
- if (force_update || pos != _last_pan_width_position_written) {
+ if (_vpot->control() != pan_control) {
+ return;
+ }
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
+ double pos = pan_control->internal_to_interface (pan_control->get_value());
- if (control == _fader) {
- if (!control->in_use()) {
- _surface->write (_fader->set_position (pos));
- queue_parameter_display (PanWidthAutomation, pos);
- }
- }
+ if (force_update || pos != _last_pan_width_position_written) {
- } else if (control == _vpot) {
- _surface->write (_vpot->set (pos, true, Pot::spread));
- queue_parameter_display (PanWidthAutomation, pos);
- }
+ _surface->write (_vpot->set (pos, true, Pot::spread));
+ do_parameter_display (PanWidthAutomation, pos);
- _last_pan_width_position_written = pos;
- }
+ _last_pan_width_position_written = pos;
}
}
return;
}
- if (ms & MackieControlProtocol::MODIFIER_SHIFT) {
- /* reset to default */
- boost::shared_ptr<AutomationControl> ac = _fader->control ();
- if (ac) {
- ac->set_value (ac->normal());
- }
- return;
- }
-
DEBUG_TRACE (DEBUG::MackieControl, "add select button on press\n");
_surface->mcp().add_down_select_button (_surface->number(), _index);
_surface->mcp().select_range ();
void
Strip::vselect_event (Button&, ButtonState bs)
{
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+
+ /* most subview modes: vpot press acts like a button for toggle parameters */
+
+ if (bs != press) {
+ return;
+ }
+
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::Sends) {
+
+ boost::shared_ptr<AutomationControl> control = _vpot->control ();
+ if (!control) {
+ return;
+ }
+
+ Controllable::GroupControlDisposition gcd;
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
+ }
+
+ if (control->toggled()) {
+ if (control->toggled()) {
+ control->set_value (!control->get_value(), gcd);
+ }
+
+ } else if (control->desc().enumeration || control->desc().integer_step) {
+
+ double val = control->get_value ();
+ if (val <= control->upper() - 1.0) {
+ control->set_value (val + 1.0, gcd);
+ } else {
+ control->set_value (control->lower(), gcd);
+ }
+ }
+
+ } else {
+
+ /* Send mode: press enables/disables the relevant
+ * send, but the vpot is bound to the send-level so we
+ * need to lookup the enable/disable control
+ * explicitly.
+ */
+
+ boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+
+ if (r) {
+
+ const uint32_t global_pos = _surface->mcp().global_index (*this);
+ boost::shared_ptr<AutomationControl> control = r->send_enable_controllable (global_pos);
+
+ if (control) {
+ bool currently_enabled = (bool) control->get_value();
+ Controllable::GroupControlDisposition gcd;
+
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
+ }
+
+ control->set_value (!currently_enabled, gcd);
+
+ if (currently_enabled) {
+ /* we just turned it off */
+ pending_display[1] = "off";
+ } else {
+ /* we just turned it on, show the level
+ */
+ control = _route->send_level_controllable (global_pos);
+ do_parameter_display (BusSendLevel, control->get_value());
+ }
+ }
+ }
+ }
+
+ /* done with this event in subview mode */
+
+ return;
+ }
+
if (bs == press) {
int ms = _surface->mcp().main_modifier_state();
if (ac) {
/* reset to default/normal value */
- ac->set_value (ac->normal());
+ ac->set_value (ac->normal(), Controllable::NoGroup);
}
} else {
+#ifdef MIXBUS
+ if (_route) {
+ boost::shared_ptr<AutomationControl> ac = _route->master_send_enable_controllable ();
+ if (ac) {
+ Controllable::GroupControlDisposition gcd;
+
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
+ }
+
+ bool enabled = ac->get_value();
+ ac->set_value (!enabled, gcd);
+ }
+ }
+#else
DEBUG_TRACE (DEBUG::MackieControl, "switching to next pot mode\n");
+ /* switch vpot to control next available parameter */
next_pot_mode ();
+#endif
}
}
boost::shared_ptr<AutomationControl> ac = _fader->control ();
- if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
- if (ac) {
- ac->set_value (ac->normal());
- }
- } else {
-
- _fader->set_in_use (true);
- _fader->start_touch (_surface->mcp().transport_frame());
+ _fader->set_in_use (true);
+ _fader->start_touch (_surface->mcp().transport_frame());
- if (ac) {
- queue_parameter_display ((AutomationType) ac->parameter().type(), ac->get_value());
- }
+ if (ac) {
+ do_parameter_display ((AutomationType) ac->parameter().type(), ac->get_value());
}
} else {
DEBUG_TRACE (DEBUG::MackieControl, "add button on press\n");
_surface->mcp().add_down_button ((AutomationType) control->parameter().type(), _surface->number(), _index);
- float new_value;
- int ms = _surface->mcp().main_modifier_state();
-
- if (ms & MackieControlProtocol::MODIFIER_SHIFT) {
- /* reset to default/normal value */
- new_value = control->normal();
- } else {
- new_value = control->get_value() ? 0.0 : 1.0;
- }
+ float new_value = control->get_value() ? 0.0 : 1.0;
/* get all controls that either have their
* button down or are within a range of
DEBUG_TRACE (DEBUG::MackieControl, string_compose ("there are %1 buttons down for control type %2, new value = %3\n",
controls.size(), control->parameter().type(), new_value));
- /* apply change */
+ /* apply change, with potential modifier semantics */
+
+ Controllable::GroupControlDisposition gcd;
+
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
+ }
for (MackieControlProtocol::ControlList::iterator c = controls.begin(); c != controls.end(); ++c) {
- (*c)->set_value (new_value);
+ (*c)->set_value (new_value, gcd);
}
} else {
}
void
-Strip::queue_parameter_display (AutomationType type, float val)
-{
- RedisplayRequest req;
-
- req.type = type;
- req.val = val;
-
- redisplay_requests.write (&req, 1);
-}
-
-void
-Strip::do_parameter_display (AutomationType type, float val)
+Strip::do_parameter_display (AutomationType type, float val)
{
bool screen_hold = false;
+ char buf[16];
switch (type) {
case GainAutomation:
if (val == 0.0) {
- _surface->write (display (1, " -inf "));
+ pending_display[1] = " -inf ";
} else {
- char buf[16];
float dB = accurate_coefficient_to_dB (val);
snprintf (buf, sizeof (buf), "%6.1f", dB);
- _surface->write (display (1, buf));
+ pending_display[1] = buf;
screen_hold = true;
}
break;
- case PanAzimuthAutomation:
-if (Profile->get_mixbus()) {
- char buf[16];
- snprintf (buf, sizeof (buf), "%2.1f", val);
- _surface->write (display (1, buf));
- screen_hold = true;
-} else {
- if (_route) {
- boost::shared_ptr<Pannable> p = _route->pannable();
- if (p && _route->panner()) {
- string str =_route->panner()->value_as_string (p->pan_azimuth_control);
- _surface->write (display (1, str));
+ case BusSendLevel:
+ if (Profile->get_mixbus()) { //Mixbus sends are already stored in dB
+ snprintf (buf, sizeof (buf), "%2.1f", val);
+ pending_display[1] = buf;
+ screen_hold = true;
+ } else {
+ if (val == 0.0) {
+ pending_display[1] = " -inf ";
+ } else {
+ float dB = accurate_coefficient_to_dB (val);
+ snprintf (buf, sizeof (buf), "%6.1f", dB);
+ pending_display[1] = buf;
screen_hold = true;
}
}
-}
+ break;
+
+ case PanAzimuthAutomation:
+ if (Profile->get_mixbus()) {
+ snprintf (buf, sizeof (buf), "%2.1f", val);
+ pending_display[1] = buf;
+ screen_hold = true;
+ } else {
+ if (_route) {
+ boost::shared_ptr<Pannable> p = _route->pannable();
+ if (p && _route->panner()) {
+ pending_display[1] =_route->panner()->value_as_string (p->pan_azimuth_control);
+ screen_hold = true;
+ }
+ }
+ }
break;
case PanWidthAutomation:
if (_route) {
- char buf[16];
snprintf (buf, sizeof (buf), "%5ld%%", lrintf ((val * 200.0)-100));
- _surface->write (display (1, buf));
+ pending_display[1] = buf;
screen_hold = true;
}
break;
case TrimAutomation:
if (_route) {
- char buf[16];
float dB = accurate_coefficient_to_dB (val);
snprintf (buf, sizeof (buf), "%6.1f", dB);
- _surface->write (display (1, buf));
+ pending_display[1] = buf;
screen_hold = true;
}
break;
case PhaseAutomation:
if (_route) {
- if (_route->phase_control()->get_value() < 0.5) {
- _surface->write (display (1, "Normal"));
+ if (val < 0.5) {
+ pending_display[1] = "Normal";
} else {
- _surface->write (display (1, "Invert"));
+ pending_display[1] = "Invert";
}
screen_hold = true;
}
break;
- case SendAutomation:
- if (val == 0.0) {
- _surface->write (display (1, " -inf "));
+ case EQGain:
+ case EQFrequency:
+ case EQQ:
+ case EQShape:
+ case EQHPF:
+ case CompThreshold:
+ case CompSpeed:
+ case CompMakeup:
+ case CompRedux:
+ snprintf (buf, sizeof (buf), "%6.1f", val);
+ pending_display[1] = buf;
+ screen_hold = true;
+ break;
+ case EQEnable:
+ case CompEnable:
+ if (val >= 0.5) {
+ pending_display[1] = "on";
} else {
- char buf[16];
- float dB = accurate_coefficient_to_dB (val);
- snprintf (buf, sizeof (buf), "%6.1f", dB);
- _surface->write (display (1, buf));
- screen_hold = true;
+ pending_display[1] = "off";
+ }
+ break;
+ case CompMode:
+ if (_surface->mcp().subview_route()) {
+ pending_display[1] = _surface->mcp().subview_route()->comp_mode_name (val);
+ }
+ break;
+ case SoloSafeAutomation:
+ case SoloIsolateAutomation:
+ if (val >= 0.5) {
+ pending_display[1] = "on";
+ } else {
+ pending_display[1] = "off";
+ }
+ break;
+ case MonitoringAutomation:
+ switch (MonitorChoice ((int) val)) {
+ case MonitorAuto:
+ pending_display[1] = "auto";
+ break;
+ case MonitorInput:
+ pending_display[1] = "input";
+ break;
+ case MonitorDisk:
+ pending_display[1] = "disk";
+ break;
+ case MonitorCue: /* XXX not implemented as of jan 2016 */
+ pending_display[1] = "cue";
+ break;
}
break;
-
default:
break;
}
if (screen_hold) {
+ /* we just queued up a parameter to be displayed.
+ 1 second from now, switch back to vpot mode display.
+ */
block_vpot_mode_display_for (1000);
}
}
return;
}
- fader.set_value (position);
+ Controllable::GroupControlDisposition gcd = Controllable::UseGroup;
+
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ }
+
+ fader.set_value (position, gcd);
/* From the Mackie Control MIDI implementation docs:
if (!ac) {
return;
}
- double p = pot.get_value ();
- p += delta;
- // fader and pot should be the same and fader is hard coded 0 -> 1
- p = max (0.0, p);
- p = min (1.0, p);
- pot.set_value (p);
-}
-void
-Strip::periodic (ARDOUR::microseconds_t now)
-{
- bool reshow_vpot_mode = false;
- bool reshow_name = false;
+ Controllable::GroupControlDisposition gcd;
- if (!_route) {
- return;
+ if (_surface->mcp().main_modifier_state() & MackieControlProtocol::MODIFIER_SHIFT) {
+ gcd = Controllable::InverseGroup;
+ } else {
+ gcd = Controllable::UseGroup;
}
- if (_block_screen_redisplay_until >= now) {
- if (_surface->mcp().device_info().has_separate_meters()) {
- goto meters;
+ if (ac->toggled()) {
+
+ /* make it like a single-step, directional switch */
+
+ if (delta > 0) {
+ ac->set_value (1.0, gcd);
+ } else {
+ ac->set_value (0.0, gcd);
}
- /* no drawing here, for now */
- return;
- } else if (_block_screen_redisplay_until) {
+ } else if (ac->desc().enumeration || ac->desc().integer_step) {
- /* timeout reached, reset */
+ /* use Controllable::get_value() to avoid the
+ * "scaling-to-interface" that takes place in
+ * Control::get_value() via the pot member.
+ *
+ * an enumeration with 4 values will have interface values of
+ * 0.0, 0.25, 0.5 and 0.75 or some similar oddness. Lets not
+ * deal with that.
+ */
- _block_screen_redisplay_until = 0;
- reshow_vpot_mode = true;
- reshow_name = true;
- }
+ if (delta > 0) {
+ ac->set_value (min (ac->upper(), ac->get_value() + 1.0), gcd);
+ } else {
+ ac->set_value (max (ac->lower(), ac->get_value() - 1.0), gcd);
+ }
- if (_block_vpot_mode_redisplay_until >= now) {
- return;
- } else if (_block_vpot_mode_redisplay_until) {
+ } else {
- /* timeout reached, reset */
+ double p = ac->get_interface();
- _block_vpot_mode_redisplay_until = 0;
- reshow_vpot_mode = true;
- }
+ p += delta;
- if (reshow_name) {
- show_route_name ();
- }
+ p = max (0.0, p);
+ p = min (1.0, p);
- if (reshow_vpot_mode) {
- return_to_vpot_mode_display ();
- } else {
- /* no point doing this if we just switched back to vpot mode
- display */
- update_automation ();
+ ac->set_value ( ac->interface_to_internal(p), gcd);
}
+}
- meters:
+void
+Strip::periodic (ARDOUR::microseconds_t now)
+{
update_meter ();
+ update_automation ();
}
void
-Strip::redisplay (ARDOUR::microseconds_t now)
+Strip::redisplay (ARDOUR::microseconds_t now, bool force)
{
- RedisplayRequest req;
- bool have_request = false;
+ if (_block_screen_redisplay_until >= now) {
+ /* no drawing allowed */
+ return;
+ }
- while (redisplay_requests.read (&req, 1) == 1) {
- /* read them all */
- have_request = true;
+ if (_block_screen_redisplay_until) {
+ /* we were blocked, but the time period has elapsed, so we must
+ * force a redraw.
+ */
+ force = true;
+ _block_screen_redisplay_until = 0;
}
- if (_block_screen_redisplay_until >= now) {
- return;
+ if (force || (current_display[0] != pending_display[0])) {
+ _surface->write (display (0, pending_display[0]));
+ current_display[0] = pending_display[0];
}
- if (have_request) {
- do_parameter_display (req.type, req.val);
+ if (return_to_vpot_mode_display_at <= now) {
+ return_to_vpot_mode_display_at = UINT64_MAX;
+ return_to_vpot_mode_display ();
+ }
+
+ if (force || (current_display[1] != pending_display[1])) {
+ _surface->write (display (1, pending_display[1]));
+ current_display[1] = pending_display[1];
}
}
void
Strip::update_automation ()
{
- ARDOUR::AutoState gain_state = _route->gain_control()->automation_state();
+ if (!_route) {
+ return;
+ }
+
+ ARDOUR::AutoState state = _route->gain_control()->automation_state();
- if (gain_state == Touch || gain_state == Play) {
+ if (state == Touch || state == Play) {
notify_gain_changed (false);
}
-if ( Profile->get_mixbus() ) {
- ARDOUR::AutoState panner_state = mb_pan_controllable->automation_state();
- if (panner_state == Touch || panner_state == Play) {
- notify_panner_azi_changed (false);
- }
-} else {
- if (_route->panner()) {
- ARDOUR::AutoState panner_state = _route->panner()->automation_state();
- if (panner_state == Touch || panner_state == Play) {
+ boost::shared_ptr<AutomationControl> pan_control = _route->pan_azimuth_control ();
+ if (pan_control) {
+ state = pan_control->automation_state ();
+ if (state == Touch || state == Play) {
notify_panner_azi_changed (false);
- notify_panner_width_changed (false);
}
}
-}
- if (_route->trim() && route()->trim()->active()) {
- ARDOUR::AutoState trim_state = _route->trim_control()->automation_state();
- if (trim_state == Touch || trim_state == Play) {
- notify_trim_changed (false);
+
+ pan_control = _route->pan_width_control ();
+ if (pan_control) {
+ state = pan_control->automation_state ();
+ if (state == Touch || state == Play) {
+ notify_panner_width_changed (false);
}
}
}
void
Strip::update_meter ()
{
+ if (!_route) {
+ return;
+ }
+
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return;
+ }
+
if (_meter && _transport_is_rolling && _metering_active) {
- float dB = const_cast<PeakMeter&> (_route->peak_meter()).meter_level (0, MeterMCP);
+ float dB = _route->peak_meter()->meter_level (0, MeterMCP);
_meter->send_update (*_surface, dB);
+ return;
}
}
_surface->write (blank_display (0));
_surface->write (blank_display (1));
+ pending_display[0] = string();
+ pending_display[1] = string();
+ current_display[0] = string();
+ current_display[1] = string();
}
MidiByteArray
string
Strip::vpot_mode_string ()
{
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return string();
+ }
+
boost::shared_ptr<AutomationControl> ac = _vpot->control();
+
if (!ac) {
return string();
}
- if (control_by_parameter.find (GainAutomation)->second == _vpot) {
- return "Fader";
- } else if (control_by_parameter.find (TrimAutomation)->second == _vpot) {
- return "Trim";
- } else if (control_by_parameter.find (PhaseAutomation)->second == _vpot) {
- return string_compose ("Phase%1", _route->phase_control()->channel() + 1);
- } else if (control_by_parameter.find (SendAutomation)->second == _vpot) {
- // should be bus name
- boost::shared_ptr<Processor> p = _route->nth_send (_current_send);
- if (p) {
- return p->name();
- }
- } else if (control_by_parameter.find (PanAzimuthAutomation)->second == _vpot) {
+ switch (ac->desc().type) {
+ case PanAzimuthAutomation:
return "Pan";
- } else if (control_by_parameter.find (PanWidthAutomation)->second == _vpot) {
+ case PanWidthAutomation:
return "Width";
- } else if (control_by_parameter.find (PanElevationAutomation)->second == _vpot) {
+ case PanElevationAutomation:
return "Elev";
- } else if (control_by_parameter.find (PanFrontBackAutomation)->second == _vpot) {
+ case PanFrontBackAutomation:
return "F/Rear";
- } else if (control_by_parameter.find (PanLFEAutomation)->second == _vpot) {
+ case PanLFEAutomation:
return "LFE";
+ default:
+ break;
}
return "???";
}
- void
-Strip::potmode_changed (bool notify)
+void
+Strip::flip_mode_changed ()
{
- if (!_route) {
- return;
- }
+ if (_surface->mcp().subview_mode() == MackieControlProtocol::Sends) {
- // WIP
- int pm = _surface->mcp().pot_mode();
- switch (pm) {
- case MackieControlProtocol::Pan:
- // This needs to set current pan mode (azimuth or width... or whatever)
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("Assign pot to Pan mode %1\n", enum_2_string (_pan_mode)));
- set_vpot_parameter (_pan_mode);
- break;
- case MackieControlProtocol::Trim:
- DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Trim mode.\n");
- set_vpot_parameter (_trim_mode);
- break;
- case MackieControlProtocol::Send:
- // _current_send has the number of the send we will show
- DEBUG_TRACE (DEBUG::MackieControl, "Assign pot to Send mode.\n");
- set_vpot_parameter (SendAutomation);
- break;
- }
+ boost::shared_ptr<AutomationControl> pot_control = _vpot->control();
+ boost::shared_ptr<AutomationControl> fader_control = _fader->control();
- if (notify) {
- notify_all ();
+ if (pot_control && fader_control) {
+ _vpot->set_control (fader_control);
+ _fader->set_control (pot_control);
+ }
+
+ if (_surface->mcp().flip_mode() == MackieControlProtocol::Normal) {
+ do_parameter_display (GainAutomation, fader_control->get_value());
+ } else {
+ do_parameter_display (BusSendLevel, fader_control->get_value());
+ }
+
+ /* update fader */
+
+ _surface->write (_fader->set_position (pot_control->internal_to_interface (pot_control->get_value ())));
+
+ /* update pot */
+
+ _surface->write (_vpot->set (fader_control->internal_to_interface (fader_control->get_value()), true, Pot::wrap));
+
+
+ } else {
+ /* do nothing */
}
}
void
Strip::block_vpot_mode_display_for (uint32_t msecs)
{
- _block_vpot_mode_redisplay_until = ARDOUR::get_microseconds() + (msecs * 1000);
+ return_to_vpot_mode_display_at = ARDOUR::get_microseconds() + (msecs * 1000);
}
void
back the mode where it shows what the VPot controls.
*/
- if (_route) {
- _surface->write (display (1, vpot_mode_string()));
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ /* do nothing - second line shows value of current subview parameter */
+ return;
+ } else if (_route) {
+ pending_display[1] = vpot_mode_string();
} else {
- _surface->write (blank_display (1));
+ pending_display[1] = string();
}
}
void
Strip::next_pot_mode ()
{
- vector<Evoral::Parameter>::iterator i;
+ vector<AutomationType>::iterator i;
if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
/* do not change vpot mode while in flipped mode */
DEBUG_TRACE (DEBUG::MackieControl, "not stepping pot mode - in flip mode\n");
- _surface->write (display (1, "Flip"));
+ pending_display[1] = "Flip";
block_vpot_mode_display_for (1000);
return;
}
if (!ac) {
return;
}
- if (_surface->mcp().pot_mode() == MackieControlProtocol::Pan) {
- if (possible_pot_parameters.empty() || (possible_pot_parameters.size() == 1 && possible_pot_parameters.front() == ac->parameter())) {
- return;
- }
- for (i = possible_pot_parameters.begin(); i != possible_pot_parameters.end(); ++i) {
- if ((*i) == ac->parameter()) {
- break;
- }
+
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return;
+ }
+
+ if (possible_pot_parameters.empty() || (possible_pot_parameters.size() == 1 && possible_pot_parameters.front() == ac->parameter().type())) {
+ return;
+ }
+
+ for (i = possible_pot_parameters.begin(); i != possible_pot_parameters.end(); ++i) {
+ if ((*i) == ac->parameter().type()) {
+ break;
}
+ }
- /* move to the next mode in the list, or back to the start (which will
- also happen if the current mode is not in the current pot mode list)
- */
+ /* move to the next mode in the list, or back to the start (which will
+ also happen if the current mode is not in the current pot mode list)
+ */
+
+ if (i != possible_pot_parameters.end()) {
+ ++i;
+ }
- if (i != possible_pot_parameters.end()) {
- ++i;
+ if (i == possible_pot_parameters.end()) {
+ i = possible_pot_parameters.begin();
+ }
+
+ set_vpot_parameter (*i);
+}
+
+void
+Strip::subview_mode_changed ()
+{
+ boost::shared_ptr<Route> r = _surface->mcp().subview_route();
+
+ subview_connections.drop_connections ();
+
+ switch (_surface->mcp().subview_mode()) {
+ case MackieControlProtocol::None:
+ set_vpot_parameter (_pan_mode);
+ /* need to show strip name again */
+ show_route_name ();
+ if (!_route) {
+ _surface->write (_vpot->set (0, true, Pot::wrap));
+ _surface->write (_fader->set_position (0.0));
}
+ notify_metering_state_changed ();
+ eq_band = -1;
+ break;
- if (i == possible_pot_parameters.end()) {
- i = possible_pot_parameters.begin();
+ case MackieControlProtocol::EQ:
+ if (r) {
+ setup_eq_vpot (r);
+ } else {
+ /* leave it as it was */
}
- set_vpot_parameter (*i);
- } else if (_surface->mcp().pot_mode() == MackieControlProtocol::Trim) {
- if (possible_trim_parameters.empty() || (possible_trim_parameters.size() == 1 && possible_trim_parameters.front() == ac->parameter())) {
- return;
+ break;
+
+ case MackieControlProtocol::Dynamics:
+ if (r) {
+ setup_dyn_vpot (r);
+ } else {
+ /* leave it as it was */
}
+ eq_band = -1;
+ break;
- for (i = possible_trim_parameters.begin(); i != possible_trim_parameters.end(); ++i) {
- if ((*i) == ac->parameter()) {
- break;
- }
+ case MackieControlProtocol::Sends:
+ if (r) {
+ setup_sends_vpot (r);
+ } else {
+ /* leave it as it was */
}
- if ((*i).type() == PhaseAutomation && _route->phase_invert().size() > 1) {
- // There are more than one channel of phase
- if ((_route->phase_control()->channel() + 1) < _route->phase_invert().size()) {
- _route->phase_control()->set_channel(_route->phase_control()->channel() + 1);
- set_vpot_parameter (*i);
- return;
- } else {
- _route->phase_control()->set_channel(0);
- }
+ eq_band = -1;
+ break;
+ case MackieControlProtocol::TrackView:
+ if (r) {
+ setup_trackview_vpot (r);
+ } else {
+ /* leave it as it was */
}
- /* move to the next mode in the list, or back to the start (which will
- also happen if the current mode is not in the current pot mode list)
- */
+ eq_band = -1;
+ break;
+ }
+}
+
+void
+Strip::setup_dyn_vpot (boost::shared_ptr<Route> r)
+{
+ if (!r) {
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> tc = r->comp_threshold_controllable ();
+ boost::shared_ptr<AutomationControl> sc = r->comp_speed_controllable ();
+ boost::shared_ptr<AutomationControl> mc = r->comp_mode_controllable ();
+ boost::shared_ptr<AutomationControl> kc = r->comp_makeup_controllable ();
+ boost::shared_ptr<AutomationControl> rc = r->comp_redux_controllable ();
+ boost::shared_ptr<AutomationControl> ec = r->comp_enable_controllable ();
+
+ uint32_t pos = _surface->mcp().global_index (*this);
+
+ /* we will control the pos-th available parameter, from the list in the
+ * order shown above.
+ */
- if (i != possible_trim_parameters.end()) {
- ++i;
+ vector<boost::shared_ptr<AutomationControl> > available;
+ vector<AutomationType> params;
+
+ if (tc) { available.push_back (tc); params.push_back (CompThreshold); }
+ if (sc) { available.push_back (sc); params.push_back (CompSpeed); }
+ if (mc) { available.push_back (mc); params.push_back (CompMode); }
+ if (kc) { available.push_back (kc); params.push_back (CompMakeup); }
+ if (rc) { available.push_back (rc); params.push_back (CompRedux); }
+ if (ec) { available.push_back (ec); params.push_back (CompEnable); }
+
+ if (pos >= available.size()) {
+ /* this knob is not needed to control the available parameters */
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ pending_display[0] = string();
+ pending_display[1] = string();
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> pc;
+ AutomationType param;
+
+ pc = available[pos];
+ param = params[pos];
+
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_dyn_change, this, param, false, true), ui_context());
+ _vpot->set_control (pc);
+
+ string pot_id;
+
+ switch (param) {
+ case CompThreshold:
+ pot_id = "Thresh";
+ break;
+ case CompSpeed:
+ if (mc) {
+ pot_id = r->comp_speed_name (mc->get_value());
+ } else {
+ pot_id = "Speed";
}
+ break;
+ case CompMode:
+ pot_id = "Mode";
+ break;
+ case CompMakeup:
+ pot_id = "Makeup";
+ break;
+ case CompRedux:
+ pot_id = "Redux";
+ break;
+ case CompEnable:
+ pot_id = "on/off";
+ break;
+ default:
+ break;
+ }
+
+ if (!pot_id.empty()) {
+ pending_display[0] = pot_id;
+ } else {
+ pending_display[0] = string();
+ }
+
+ notify_dyn_change (param, true, false);
+}
+
+void
+Strip::setup_eq_vpot (boost::shared_ptr<Route> r)
+{
+ uint32_t bands = r->eq_band_cnt ();
+
+ if (bands == 0) {
+ /* should never get here */
+ return;
+ }
+
+ /* figure out how many params per band are available */
+
+ boost::shared_ptr<AutomationControl> pc;
+ uint32_t params_per_band = 0;
- if (i == possible_trim_parameters.end()) {
- i = possible_trim_parameters.begin();
+ if ((pc = r->eq_gain_controllable (0))) {
+ params_per_band += 1;
+ }
+ if ((pc = r->eq_freq_controllable (0))) {
+ params_per_band += 1;
+ }
+ if ((pc = r->eq_q_controllable (0))) {
+ params_per_band += 1;
+ }
+ if ((pc = r->eq_shape_controllable (0))) {
+ params_per_band += 1;
+ }
+
+ /* pick the one for this strip, based on its global position across
+ * all surfaces
+ */
+
+ pc.reset ();
+
+ const uint32_t total_band_parameters = bands * params_per_band;
+ const uint32_t global_pos = _surface->mcp().global_index (*this);
+ AutomationType param = NullAutomation;
+ string band_name;
+
+ eq_band = -1;
+
+ if (global_pos < total_band_parameters) {
+
+ /* show a parameter for an EQ band */
+
+ const uint32_t parameter = global_pos % params_per_band;
+ eq_band = global_pos / params_per_band;
+ band_name = r->eq_band_name (eq_band);
+
+ switch (parameter) {
+ case 0:
+ pc = r->eq_gain_controllable (eq_band);
+ param = EQGain;
+ break;
+ case 1:
+ pc = r->eq_freq_controllable (eq_band);
+ param = EQFrequency;
+ break;
+ case 2:
+ pc = r->eq_q_controllable (eq_band);
+ param = EQQ;
+ break;
+ case 3:
+ pc = r->eq_shape_controllable (eq_band);
+ param = EQShape;
+ break;
}
- set_vpot_parameter (*i);
- } else if (_surface->mcp().pot_mode() == MackieControlProtocol::Send) {
- boost::shared_ptr<Processor> p = _route->nth_send (_current_send);
- if (!p) {
+
+ } else {
+
+ /* show a non-band parameter (HPF or enable)
+ */
+
+ uint32_t parameter = global_pos - total_band_parameters;
+
+ switch (parameter) {
+ case 0: /* first control after band parameters */
+ pc = r->eq_hpf_controllable();
+ param = EQHPF;
+ break;
+ case 1: /* second control after band parameters */
+ pc = r->eq_enable_controllable();
+ param = EQEnable;
+ break;
+ default:
+ /* nothing to control */
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ pending_display[0] = string();
+ pending_display[1] = string();
+ /* done */
return;
+ break;
}
- p = _route->nth_send (_current_send + 1);
- if (p && p->name() != "Monitor 1") {
- _current_send++;
+
+ }
+
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_eq_change, this, param, eq_band, false), ui_context());
+ _vpot->set_control (pc);
+
+ string pot_id;
+
+ switch (param) {
+ case EQGain:
+ pot_id = band_name + "Gain";
+ break;
+ case EQFrequency:
+ pot_id = band_name + "Freq";
+ break;
+ case EQQ:
+ pot_id = band_name + " Q";
+ break;
+ case EQShape:
+ pot_id = band_name + " Shp";
+ break;
+ case EQHPF:
+ pot_id = "HPFreq";
+ break;
+ case EQEnable:
+ pot_id = "on/off";
+ break;
+ default:
+ break;
+ }
+
+ if (!pot_id.empty()) {
+ pending_display[0] = pot_id;
} else {
- _current_send = 0;
+ pending_display[0] = string();
}
- set_vpot_parameter (SendAutomation);
+
+ notify_eq_change (param, eq_band, true);
}
}
void
-Strip::set_vpot_parameter (Evoral::Parameter p)
+Strip::setup_sends_vpot (boost::shared_ptr<Route> r)
{
- boost::shared_ptr<Pannable> pannable;
+ if (!r) {
+ return;
+ }
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("switch to vpot mode %1\n", p.type()));
+ const uint32_t global_pos = _surface->mcp().global_index (*this);
- reset_saved_values ();
+ boost::shared_ptr<AutomationControl> pc = r->send_level_controllable (global_pos);
+
+ if (!pc) {
+ pending_display[0] = string();
+ pending_display[1] = string();
+ return;
+ }
- /* unset any mapping between the vpot and any existing parameters */
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_send_level_change, this, BusSendLevel, global_pos, false), ui_context());
+ _vpot->set_control (pc);
- for (ControlParameterMap::iterator i = control_by_parameter.begin(); i != control_by_parameter.end(); ++i) {
+ pending_display[0] = PBD::short_version (r->send_name (global_pos), 6);
- if (i != control_by_parameter.end() && i->second == _vpot) {
- i->second = 0;
- }
+ notify_send_level_change (BusSendLevel, global_pos, true);
+}
+
+void
+Strip::setup_trackview_vpot (boost::shared_ptr<Route> r)
+{
+ if (!r) {
+ return;
}
- switch (p.type()) {
- case PanAzimuthAutomation:
- _pan_mode = PanAzimuthAutomation;
- pannable = _route->pannable ();
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, pan azi to fader */
- _vpot->set_control (_route->group_gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- if (pannable) {
- _fader->set_control (mb_pan_controllable);
- control_by_parameter[PanAzimuthAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanAzimuthAutomation] = 0;
- }
- } else {
- /* gain to fader, pan azi to vpot */
- _fader->set_control (_route->group_gain_control());
- control_by_parameter[GainAutomation] = _fader;
- if (pannable) {
- _vpot->set_control (mb_pan_controllable);
- control_by_parameter[PanAzimuthAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanAzimuthAutomation] = 0;
- }
+ const uint32_t global_pos = _surface->mcp().global_index (*this);
+
+ if (global_pos >= 8) {
+ pending_display[0] = string();
+ pending_display[1] = string();
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> pc;
+ boost::shared_ptr<Track> track = boost::dynamic_pointer_cast<Track> (r);
+ string label;
+
+ switch (global_pos) {
+ case 0:
+ pc = r->trim_control ();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, TrimAutomation, global_pos, false), ui_context());
+ pending_display[0] = "Trim";
+ notify_trackview_change (TrimAutomation, global_pos, true);
}
break;
- case PanWidthAutomation:
- _pan_mode = PanWidthAutomation;
- pannable = _route->pannable ();
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, pan width to fader */
- _vpot->set_control (_route->group_gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- if (pannable) {
- _fader->set_control (pannable->pan_width_control);
- control_by_parameter[PanWidthAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanWidthAutomation] = 0;
- }
- } else {
- /* gain to fader, pan width to vpot */
- _fader->set_control (_route->group_gain_control());
- control_by_parameter[GainAutomation] = _fader;
- if (pannable) {
- _vpot->set_control (pannable->pan_width_control);
- control_by_parameter[PanWidthAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PanWidthAutomation] = 0;
+ case 1:
+ if (track) {
+ pc = track->monitoring_control();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, MonitoringAutomation, global_pos, false), ui_context());
+ pending_display[0] = "Mon";
+ notify_trackview_change (MonitoringAutomation, global_pos, true);
}
}
break;
- case PanElevationAutomation:
- break;
- case PanFrontBackAutomation:
- break;
- case PanLFEAutomation:
- break;
- case TrimAutomation:
- _trim_mode = TrimAutomation;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, trim to fader */
- _vpot->set_control (_route->group_gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- if (_route->trim() && route()->trim()->active()) {
- _fader->set_control (_route->trim_control());
- control_by_parameter[TrimAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[TrimAutomation] = 0;
- }
- } else {
- /* gain to fader, trim to vpot */
- _fader->set_control (_route->group_gain_control());
- control_by_parameter[GainAutomation] = _fader;
- if (_route->trim() && route()->trim()->active()) {
- _vpot->set_control (_route->trim_control());
- control_by_parameter[TrimAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[TrimAutomation] = 0;
- }
+ case 2:
+ pc = r->solo_isolate_control ();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, SoloIsolateAutomation, global_pos, false), ui_context());
+ notify_trackview_change (SoloIsolateAutomation, global_pos, true);
+ pending_display[0] = "S-Iso";
}
break;
- case PhaseAutomation:
- _trim_mode = PhaseAutomation;
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- /* gain to vpot, phase to fader */
- _vpot->set_control (_route->group_gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- if (_route->phase_invert().size()) {
- _fader->set_control (_route->phase_control());
- control_by_parameter[PhaseAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PhaseAutomation] = 0;
- }
- } else {
- /* gain to fader, phase to vpot */
- _fader->set_control (_route->group_gain_control());
- control_by_parameter[GainAutomation] = _fader;
- if (_route->phase_invert().size()) {
- _vpot->set_control (_route->phase_control());
- control_by_parameter[PhaseAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[PhaseAutomation] = 0;
- }
+ case 3:
+ pc = r->solo_safe_control ();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, SoloSafeAutomation, global_pos, false), ui_context());
+ notify_trackview_change (SoloSafeAutomation, global_pos, true);
+ pending_display[0] = "S-Safe";
}
break;
- case SendAutomation:
- if (_surface->mcp().flip_mode() != MackieControlProtocol::Normal) {
- // gain to vpot, send to fader
- _vpot->set_control (_route->group_gain_control());
- control_by_parameter[GainAutomation] = _vpot;
- // test for send to control
- boost::shared_ptr<Processor> p = _route->nth_send (_current_send);
- if (p && p->name() != "Monitor 1") {
- boost::shared_ptr<Send> s = boost::dynamic_pointer_cast<Send>(p);
- boost::shared_ptr<Amp> a = s->amp();
- _fader->set_control (a->gain_control());
- // connect to signal
- send_connections.drop_connections ();
- a->gain_control()->Changed.connect(send_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_processor_changed, this, false), ui_context());
- control_by_parameter[SendAutomation] = _fader;
- } else {
- _fader->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[SendAutomation] = 0;
- }
- } else {
- // gain to fader, send to vpot
- _fader->set_control (_route->group_gain_control());
- control_by_parameter[GainAutomation] = _fader;
- boost::shared_ptr<Processor> p = _route->nth_send (_current_send);
- if (p && p->name() != "Monitor 1") {
- boost::shared_ptr<Send> s = boost::dynamic_pointer_cast<Send>(p);
- boost::shared_ptr<Amp> a = s->amp();
- _vpot->set_control (a->gain_control());
- // connect to signal
- send_connections.drop_connections ();
- a->gain_control()->Changed.connect(send_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_processor_changed, this, false), ui_context());
- control_by_parameter[SendAutomation] = _vpot;
- } else {
- _vpot->set_control (boost::shared_ptr<AutomationControl>());
- control_by_parameter[SendAutomation] = 0;
- }
+ case 4:
+ pc = r->phase_control();
+ if (pc) {
+ pc->Changed.connect (subview_connections, MISSING_INVALIDATOR, boost::bind (&Strip::notify_trackview_change, this, PhaseAutomation, global_pos, false), ui_context());
+ notify_trackview_change (PhaseAutomation, global_pos, true);
+ pending_display[0] = "Phase";
}
break;
- default:
- DEBUG_TRACE (DEBUG::MackieControl, string_compose ("vpot mode %1 not known.\n", p));
+ case 5:
+ // pc = r->trim_control ();
+ break;
+ case 6:
+ // pc = r->trim_control ();
+ break;
+ case 7:
+ // pc = r->trim_control ();
break;
+ }
+ if (!pc) {
+ pending_display[0] = string();
+ pending_display[1] = string();
+ return;
}
- _surface->write (display (1, vpot_mode_string()));
+ _vpot->set_control (pc);
+}
+
+void
+Strip::set_vpot_parameter (AutomationType p)
+{
+ if (!_route || (p == NullAutomation)) {
+ _vpot->set_control (boost::shared_ptr<AutomationControl>());
+ pending_display[1] = string();
+ return;
+ }
+
+ boost::shared_ptr<AutomationControl> pan_control;
+
+ DEBUG_TRACE (DEBUG::MackieControl, string_compose ("switch to vpot mode %1\n", p));
+
+ reset_saved_values ();
+
+ switch (p) {
+ case PanAzimuthAutomation:
+ pan_control = _route->pan_azimuth_control ();
+ break;
+ case PanWidthAutomation:
+ pan_control = _route->pan_width_control ();
+ break;
+ case PanElevationAutomation:
+ break;
+ case PanFrontBackAutomation:
+ break;
+ case PanLFEAutomation:
+ break;
+ default:
+ return;
+ }
+
+ if (pan_control) {
+ _pan_mode = p;
+ _vpot->set_control (pan_control);
+ }
+
+ pending_display[1] = vpot_mode_string ();
}
bool
void
Strip::notify_metering_state_changed()
{
+ if (_surface->mcp().subview_mode() != MackieControlProtocol::None) {
+ return;
+ }
+
if (!_route || !_meter) {
return;
}
projects / ardour.git / blobdiff