1 # Makefile.in generated by automake 1.14.1 from Makefile.am.
4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 # $Id: Makefile.am,v 1.5 2009/04/09 19:25:39 msheby Exp $
19 # Copyright (c) 2007-2009 John Hurst. All rights reserved.
21 # Redistribution and use in source and binary forms, with or without
22 # modification, are permitted provided that the following conditions
24 # 1. Redistributions of source code must retain the above copyright
25 # notice, this list of conditions and the following disclaimer.
26 # 2. Redistributions in binary form must reproduce the above copyright
27 # notice, this list of conditions and the following disclaimer in the
28 # documentation and/or other materials provided with the distribution.
29 # 3. The name of the author may not be used to endorse or promote products
30 # derived from this software without specific prior written permission.
32 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
33 # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
34 # OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
35 # IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
36 # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
37 # NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
38 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
39 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
40 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
41 # THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
43 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
44 am__make_running_with_option = \
45 case $${target_option-} in \
47 *) echo "am__make_running_with_option: internal error: invalid" \
48 "target option '$${target_option-}' specified" >&2; \
52 sane_makeflags=$$MAKEFLAGS; \
53 if $(am__is_gnu_make); then \
54 sane_makeflags=$$MFLAGS; \
59 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
60 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
66 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
68 for flg in $$sane_makeflags; do \
69 test $$skip_next = yes && { skip_next=no; continue; }; \
72 -*I) strip_trailopt 'I'; skip_next=yes;; \
73 -*I?*) strip_trailopt 'I';; \
74 -*O) strip_trailopt 'O'; skip_next=yes;; \
75 -*O?*) strip_trailopt 'O';; \
76 -*l) strip_trailopt 'l'; skip_next=yes;; \
77 -*l?*) strip_trailopt 'l';; \
78 -[dEDm]) skip_next=yes;; \
79 -[JT]) skip_next=yes;; \
82 *$$target_option*) has_opt=yes; break;; \
86 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
87 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
88 pkgdatadir = $(datadir)/@PACKAGE@
89 pkgincludedir = $(includedir)/@PACKAGE@
90 pkglibdir = $(libdir)/@PACKAGE@
91 pkglibexecdir = $(libexecdir)/@PACKAGE@
92 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
93 install_sh_DATA = $(install_sh) -c -m 644
94 install_sh_PROGRAM = $(install_sh) -c
95 install_sh_SCRIPT = $(install_sh) -c
96 INSTALL_HEADER = $(INSTALL_DATA)
97 transform = $(program_transform_name)
104 build_triplet = @build@
105 host_triplet = @host@
107 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
108 $(top_srcdir)/configure $(am__configure_deps) COPYING README \
109 build-aux/compile build-aux/config.guess build-aux/config.sub \
110 build-aux/depcomp build-aux/install-sh build-aux/missing \
111 build-aux/ltmain.sh $(top_srcdir)/build-aux/compile \
112 $(top_srcdir)/build-aux/config.guess \
113 $(top_srcdir)/build-aux/config.sub \
114 $(top_srcdir)/build-aux/install-sh \
115 $(top_srcdir)/build-aux/ltmain.sh \
116 $(top_srcdir)/build-aux/missing
117 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
118 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_lib_expat.m4 \
119 $(top_srcdir)/m4/ax_lib_openssl.m4 \
120 $(top_srcdir)/m4/ax_lib_xerces.m4 \
121 $(top_srcdir)/m4/az_python.m4 $(top_srcdir)/m4/libtool.m4 \
122 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
123 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
124 $(top_srcdir)/configure.ac
125 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
127 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
128 configure.lineno config.status.lineno
129 mkinstalldirs = $(install_sh) -d
131 CONFIG_CLEAN_VPATH_FILES =
132 AM_V_P = $(am__v_P_@AM_V@)
133 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
136 AM_V_GEN = $(am__v_GEN_@AM_V@)
137 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
138 am__v_GEN_0 = @echo " GEN " $@;
140 AM_V_at = $(am__v_at_@AM_V@)
141 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
146 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
147 ctags-recursive dvi-recursive html-recursive info-recursive \
148 install-data-recursive install-dvi-recursive \
149 install-exec-recursive install-html-recursive \
150 install-info-recursive install-pdf-recursive \
151 install-ps-recursive install-recursive installcheck-recursive \
152 installdirs-recursive pdf-recursive ps-recursive \
153 tags-recursive uninstall-recursive
154 am__can_run_installinfo = \
155 case $$AM_UPDATE_INFO_DIR in \
157 *) (install-info --version) >/dev/null 2>&1;; \
159 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
160 distclean-recursive maintainer-clean-recursive
161 am__recursive_targets = \
162 $(RECURSIVE_TARGETS) \
163 $(RECURSIVE_CLEAN_TARGETS) \
164 $(am__extra_recursive_targets)
165 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
166 cscope distdir dist dist-all distcheck
167 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
168 # Read a list of newline-separated strings from the standard input,
169 # and print each of them once, without duplicates. Input order is
171 am__uniquify_input = $(AWK) '\
172 BEGIN { nonempty = 0; } \
173 { items[$$0] = 1; nonempty = 1; } \
174 END { if (nonempty) { for (i in items) print i; }; } \
176 # Make sure the list of sources is unique. This is necessary because,
177 # e.g., the same source file might be shared among _SOURCES variables
178 # for different programs/libraries.
179 am__define_uniq_tagged_files = \
180 list='$(am__tagged_files)'; \
181 unique=`for i in $$list; do \
182 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
183 done | $(am__uniquify_input)`
187 DIST_SUBDIRS = $(SUBDIRS)
188 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
189 distdir = $(PACKAGE)-$(VERSION)
190 top_distdir = $(distdir)
191 am__remove_distdir = \
192 if test -d "$(distdir)"; then \
193 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
194 && rm -rf "$(distdir)" \
195 || { sleep 5 && rm -rf "$(distdir)"; }; \
197 am__post_remove_distdir = $(am__remove_distdir)
200 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
201 sed_rest='s,^[^/]*/*,,'; \
202 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
203 sed_butlast='s,/*[^/]*$$,,'; \
204 while test -n "$$dir1"; do \
205 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
206 if test "$$first" != "."; then \
207 if test "$$first" = ".."; then \
208 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
209 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
211 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
212 if test "$$first2" = "$$first"; then \
213 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
217 dir0="$$dir0"/"$$first"; \
220 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
223 DIST_ARCHIVES = $(distdir).tar.gz
225 DIST_TARGETS = dist-gzip
226 distuninstallcheck_listfiles = find . -type f -print
227 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
228 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
229 distcleancheck_listfiles = find . -type f -print
232 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
234 AUTOCONF = @AUTOCONF@
235 AUTOHEADER = @AUTOHEADER@
236 AUTOMAKE = @AUTOMAKE@
239 CCDEPMODE = @CCDEPMODE@
242 CPPFLAGS = @CPPFLAGS@
245 CXXDEPMODE = @CXXDEPMODE@
246 CXXFLAGS = @CXXFLAGS@
247 CYGPATH_W = @CYGPATH_W@
251 DSYMUTIL = @DSYMUTIL@
258 EXPAT_CFLAGS = @EXPAT_CFLAGS@
259 EXPAT_LDFLAGS = @EXPAT_LDFLAGS@
260 EXPAT_VERSION = @EXPAT_VERSION@
264 INSTALL_DATA = @INSTALL_DATA@
265 INSTALL_PROGRAM = @INSTALL_PROGRAM@
266 INSTALL_SCRIPT = @INSTALL_SCRIPT@
267 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
275 LTLIBOBJS = @LTLIBOBJS@
276 MAKEINFO = @MAKEINFO@
277 MANIFEST_TOOL = @MANIFEST_TOOL@
283 OPENSSL_CPPFLAGS = @OPENSSL_CPPFLAGS@
284 OPENSSL_LDFLAGS = @OPENSSL_LDFLAGS@
285 OPENSSL_LIBS = @OPENSSL_LIBS@
286 OPENSSL_VERSION = @OPENSSL_VERSION@
290 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
291 PACKAGE_NAME = @PACKAGE_NAME@
292 PACKAGE_STRING = @PACKAGE_STRING@
293 PACKAGE_TARNAME = @PACKAGE_TARNAME@
294 PACKAGE_URL = @PACKAGE_URL@
295 PACKAGE_VERSION = @PACKAGE_VERSION@
296 PATH_SEPARATOR = @PATH_SEPARATOR@
298 PYTHON_CPPFLAGS = @PYTHON_CPPFLAGS@
299 PYTHON_CSPEC = @PYTHON_CSPEC@
300 PYTHON_EXECDIR = @PYTHON_EXECDIR@
301 PYTHON_EXECPREFIX = @PYTHON_EXECPREFIX@
302 PYTHON_LDFLAGS = @PYTHON_LDFLAGS@
303 PYTHON_LSPEC = @PYTHON_LSPEC@
304 PYTHON_PREFIX = @PYTHON_PREFIX@
305 PYTHON_SHORTVERSION = @PYTHON_SHORTVERSION@
308 SET_MAKE = @SET_MAKE@
312 XERCES_CPPFLAGS = @XERCES_CPPFLAGS@
313 XERCES_LDFLAGS = @XERCES_LDFLAGS@
314 XERCES_LIBS = @XERCES_LIBS@
315 XERCES_VERSION = @XERCES_VERSION@
316 abs_builddir = @abs_builddir@
317 abs_srcdir = @abs_srcdir@
318 abs_top_builddir = @abs_top_builddir@
319 abs_top_srcdir = @abs_top_srcdir@
320 ac_ct_AR = @ac_ct_AR@
321 ac_ct_CC = @ac_ct_CC@
322 ac_ct_CXX = @ac_ct_CXX@
323 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
324 am__include = @am__include@
325 am__leading_dot = @am__leading_dot@
326 am__quote = @am__quote@
328 am__untar = @am__untar@
331 build_alias = @build_alias@
332 build_cpu = @build_cpu@
333 build_os = @build_os@
334 build_vendor = @build_vendor@
335 builddir = @builddir@
337 datarootdir = @datarootdir@
340 exec_prefix = @exec_prefix@
342 host_alias = @host_alias@
343 host_cpu = @host_cpu@
345 host_vendor = @host_vendor@
347 includedir = @includedir@
349 install_sh = @install_sh@
351 libexecdir = @libexecdir@
352 localedir = @localedir@
353 localstatedir = @localstatedir@
356 oldincludedir = @oldincludedir@
359 program_transform_name = @program_transform_name@
362 sharedstatedir = @sharedstatedir@
364 sysconfdir = @sysconfdir@
365 target_alias = @target_alias@
366 top_build_prefix = @top_build_prefix@
367 top_builddir = @top_builddir@
368 top_srcdir = @top_srcdir@
370 ACLOCAL_AMFLAGS = -I m4
374 am--refresh: Makefile
376 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
378 case '$(am__configure_deps)' in \
380 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
381 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
386 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
387 $(am__cd) $(top_srcdir) && \
388 $(AUTOMAKE) --foreign Makefile
390 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
393 echo ' $(SHELL) ./config.status'; \
394 $(SHELL) ./config.status;; \
396 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
397 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
400 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
401 $(SHELL) ./config.status --recheck
403 $(top_srcdir)/configure: $(am__configure_deps)
404 $(am__cd) $(srcdir) && $(AUTOCONF)
405 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
406 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
407 $(am__aclocal_m4_deps):
416 -rm -f libtool config.lt
418 # This directory's subdirectories are mostly independent; you can cd
419 # into them and run 'make' without going through this Makefile.
420 # To change the values of 'make' variables: instead of editing Makefiles,
421 # (1) if the variable is set in 'config.status', edit 'config.status'
422 # (which will cause the Makefiles to be regenerated when you run 'make');
423 # (2) otherwise, pass the desired values on the 'make' command line.
424 $(am__recursive_targets):
426 if $(am__make_keepgoing); then \
427 failcom='fail=yes'; \
432 target=`echo $@ | sed s/-recursive//`; \
434 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
435 *) list='$(SUBDIRS)' ;; \
437 for subdir in $$list; do \
438 echo "Making $$target in $$subdir"; \
439 if test "$$subdir" = "."; then \
441 local_target="$$target-am"; \
443 local_target="$$target"; \
445 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
448 if test "$$dot_seen" = "no"; then \
449 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
452 ID: $(am__tagged_files)
453 $(am__define_uniq_tagged_files); mkid -fID $$unique
457 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
460 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
461 include_option=--etags-include; \
464 include_option=--include; \
467 list='$(SUBDIRS)'; for subdir in $$list; do \
468 if test "$$subdir" = .; then :; else \
469 test ! -f $$subdir/TAGS || \
470 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
473 $(am__define_uniq_tagged_files); \
475 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
476 test -n "$$unique" || unique=$$empty_fix; \
477 if test $$# -gt 0; then \
478 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
481 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
485 ctags: ctags-recursive
488 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
489 $(am__define_uniq_tagged_files); \
490 test -z "$(CTAGS_ARGS)$$unique" \
491 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
495 here=`$(am__cd) $(top_builddir) && pwd` \
496 && $(am__cd) $(top_srcdir) \
497 && gtags -i $(GTAGS_ARGS) "$$here"
499 test ! -s cscope.files \
500 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
503 cscope.files: clean-cscope cscopelist
504 cscopelist: cscopelist-recursive
506 cscopelist-am: $(am__tagged_files)
507 list='$(am__tagged_files)'; \
508 case "$(srcdir)" in \
509 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
510 *) sdir=$(subdir)/$(srcdir) ;; \
512 for i in $$list; do \
513 if test -f "$$i"; then \
514 echo "$(subdir)/$$i"; \
518 done >> $(top_builddir)/cscope.files
521 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
522 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
524 distdir: $(DISTFILES)
525 $(am__remove_distdir)
526 test -d "$(distdir)" || mkdir "$(distdir)"
527 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
528 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
529 list='$(DISTFILES)'; \
530 dist_files=`for file in $$list; do echo $$file; done | \
531 sed -e "s|^$$srcdirstrip/||;t" \
532 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
533 case $$dist_files in \
534 */*) $(MKDIR_P) `echo "$$dist_files" | \
535 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
538 for file in $$dist_files; do \
539 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
540 if test -d $$d/$$file; then \
541 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
542 if test -d "$(distdir)/$$file"; then \
543 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
545 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
546 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
547 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
549 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
551 test -f "$(distdir)/$$file" \
552 || cp -p $$d/$$file "$(distdir)/$$file" \
556 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
557 if test "$$subdir" = .; then :; else \
559 || test -d "$(distdir)/$$subdir" \
560 || $(MKDIR_P) "$(distdir)/$$subdir" \
562 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
564 new_distdir=$$reldir; \
565 dir1=$$subdir; dir2="$(top_distdir)"; \
567 new_top_distdir=$$reldir; \
568 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
569 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
570 ($(am__cd) $$subdir && \
571 $(MAKE) $(AM_MAKEFLAGS) \
572 top_distdir="$$new_top_distdir" \
573 distdir="$$new_distdir" \
574 am__remove_distdir=: \
575 am__skip_length_check=: \
576 am__skip_mode_fix=: \
581 -test -n "$(am__skip_mode_fix)" \
582 || find "$(distdir)" -type d ! -perm -755 \
583 -exec chmod u+rwx,go+rx {} \; -o \
584 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
585 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
586 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
587 || chmod -R a+r "$(distdir)"
589 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
590 $(am__post_remove_distdir)
593 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
594 $(am__post_remove_distdir)
597 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
598 $(am__post_remove_distdir)
601 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
602 $(am__post_remove_distdir)
605 @echo WARNING: "Support for shar distribution archives is" \
607 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
608 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
609 $(am__post_remove_distdir)
612 @echo WARNING: "Support for distribution archives compressed with" \
613 "legacy program 'compress' is deprecated." >&2
614 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
615 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
616 $(am__post_remove_distdir)
619 -rm -f $(distdir).zip
620 zip -rq $(distdir).zip $(distdir)
621 $(am__post_remove_distdir)
624 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
625 $(am__post_remove_distdir)
627 # This target untars the dist file and tries a VPATH configuration. Then
628 # it guarantees that the distribution is self-contained by making another
631 case '$(DIST_ARCHIVES)' in \
633 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
635 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
637 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
639 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
641 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
643 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
645 unzip $(distdir).zip ;;\
647 chmod -R a-w $(distdir)
649 mkdir $(distdir)/_build $(distdir)/_inst
651 test -d $(distdir)/_build || exit 0; \
652 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
653 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
655 && $(am__cd) $(distdir)/_build \
657 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
658 $(DISTCHECK_CONFIGURE_FLAGS) \
659 --srcdir=.. --prefix="$$dc_install_base" \
660 && $(MAKE) $(AM_MAKEFLAGS) \
661 && $(MAKE) $(AM_MAKEFLAGS) dvi \
662 && $(MAKE) $(AM_MAKEFLAGS) check \
663 && $(MAKE) $(AM_MAKEFLAGS) install \
664 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
665 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
666 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
668 && chmod -R a-w "$$dc_install_base" \
670 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
671 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
672 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
673 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
674 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
675 } || { rm -rf "$$dc_destdir"; exit 1; }) \
676 && rm -rf "$$dc_destdir" \
677 && $(MAKE) $(AM_MAKEFLAGS) dist \
678 && rm -rf $(DIST_ARCHIVES) \
679 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
682 $(am__post_remove_distdir)
683 @(echo "$(distdir) archives ready for distribution: "; \
684 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
685 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
687 @test -n '$(distuninstallcheck_dir)' || { \
688 echo 'ERROR: trying to run $@ with an empty' \
689 '$$(distuninstallcheck_dir)' >&2; \
692 $(am__cd) '$(distuninstallcheck_dir)' || { \
693 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
696 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
697 || { echo "ERROR: files left after uninstall:" ; \
698 if test -n "$(DESTDIR)"; then \
699 echo " (check DESTDIR support)"; \
701 $(distuninstallcheck_listfiles) ; \
703 distcleancheck: distclean
704 @if test '$(srcdir)' = . ; then \
705 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
708 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
709 || { echo "ERROR: files left in build directory after distclean:" ; \
710 $(distcleancheck_listfiles) ; \
713 check: check-recursive
715 installdirs: installdirs-recursive
717 install: install-recursive
718 install-exec: install-exec-recursive
719 install-data: install-data-recursive
720 uninstall: uninstall-recursive
723 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
725 installcheck: installcheck-recursive
727 if test -z '$(STRIP)'; then \
728 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
729 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
732 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
733 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
734 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
741 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
742 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
744 maintainer-clean-generic:
745 @echo "This command is intended for maintainers to use"
746 @echo "it deletes files that may require special tools to rebuild."
747 clean: clean-recursive
749 clean-am: clean-generic clean-libtool mostlyclean-am
751 distclean: distclean-recursive
752 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
754 distclean-am: clean-am distclean-generic distclean-libtool \
771 install-dvi: install-dvi-recursive
777 install-html: install-html-recursive
781 install-info: install-info-recursive
787 install-pdf: install-pdf-recursive
791 install-ps: install-ps-recursive
797 maintainer-clean: maintainer-clean-recursive
798 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
799 -rm -rf $(top_srcdir)/autom4te.cache
801 maintainer-clean-am: distclean-am maintainer-clean-generic
803 mostlyclean: mostlyclean-recursive
805 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
817 .MAKE: $(am__recursive_targets) install-am install-strip
819 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
820 am--refresh check check-am clean clean-cscope clean-generic \
821 clean-libtool cscope cscopelist-am ctags ctags-am dist \
822 dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
823 dist-xz dist-zip distcheck distclean distclean-generic \
824 distclean-libtool distclean-tags distcleancheck distdir \
825 distuninstallcheck dvi dvi-am html html-am info info-am \
826 install install-am install-data install-data-am install-dvi \
827 install-dvi-am install-exec install-exec-am install-html \
828 install-html-am install-info install-info-am install-man \
829 install-pdf install-pdf-am install-ps install-ps-am \
830 install-strip installcheck installcheck-am installdirs \
831 installdirs-am maintainer-clean maintainer-clean-generic \
832 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
833 ps ps-am tags tags-am uninstall uninstall-am
836 # Tell versions [3.59,3.63) of GNU make to not export all variables.
837 # Otherwise a system limit (for SysV at least) may be exceeded.