</para>
<para>
-If you are using a 32-bit version of Windows, you will need the 32-bit
-installer. For 64-bit Windows, either installer will work, but I
-suggest you use the 64-bit version as it will allow DCP-o-matic to
-use more memory. You may find that DCP-o-matic crashes if you run
-many parallel encoding threads (more than 4) on the 32-bit
-version.
+Use the 64-bit installer unless you are using a 32-bit version of Windows.
+You may find that DCP-o-matic crashes if run the 32-bit version on a CPU with more than 4 cores.
</para>
</section>
<title>macOS</title>
<para>
-DCP-o-matic will run on macOS version 10.10 (Yosemite) and
-higher. DCP-o-matic is split into seven separate applications, each of
+DCP-o-matic versions 2.16.0 and higher will run on macOS version 10.10 (Yosemite) and
+higher. DCP-o-matic is split into eight separate applications, each of
which can be installed by downloading the <code>.dmg</code>,
double-clicking to open and then dragging the icon to your
<guilabel>Applications</guilabel> folder.
with the first (main) part.
</para>
+<para>
+If you are using macOS 10.9 (Mavericks) or older you will need to install the latest 2.14.x version of DCP-o-matic.
+</para>
+
</section>
<!-- ============================================================== -->
</section>
<section>
- <title>
- Building from source
- </title>
- <para>
- Since DCP-o-matic is open-source you can also build it yourself, though this can be quite a difficult process (especially on Windows and macOS). There are instructions for how to do it on
- <ulink url="https://dcpomatic.com/development">
- https://dcpomatic.com/
- </ulink>
+<title>Building from source</title>
+<para>
+Since DCP-o-matic is open-source you can also build it yourself,
+though this can be quite a difficult process (especially on Windows and macOS).
+There are instructions for how to do it on <ulink url="https://dcpomatic.com/development">https://dcpomatic.com/</ulink>
</para>
</section>
</chapter>
url="https://download.blender.org/durian/trailer/Sintel_Trailer.480p.DivX_Plus_HD.mkv">their
website</ulink>. Generally one would want to use the
highest-resolution material available, but for this test we will use
-the low-resolution version to save everyone's bandwidth bills.
+the low-resolution version to save on download time.
</para>
<para>
</chapter>
+<!-- ============================================================== -->
+<chapter xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en" id="ch-disk-writer">
+<title>Writing DCP drives</title>
+
+<para>
+Once a DCP has been created it must often be transferred to a cinema for playback. The most reliable way to do this is to write a specially-formatted drive (in the ext2 format) containing your DCP.
+</para>
+
+<para>
+Writing ext2-formatted drives is difficult from macOS and Windows without custom software. DCP-o-matic includes a tool called the ‘DCP-o-matic Disk Writer’ which makes it easy.
+</para>
+
+</chapter>
+
+
<!-- ============================================================== -->
<chapter xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en" id="ch-manipulating-existing-dcps">
<title>Manipulating existing DCPs</title>
<!-- ============================================================== -->
<section>
-<title>Content Properties</title>
+<title>Content properties</title>
<para>
Below the content list are the controls to set content properties. To
<para>
The <guilabel>Processor</guilabel> control allows you to select a
-process to apply to the audio before it goes into the DCP. Three processes are currently provided:
+process to apply to the audio before it goes into the DCP. One process is currently provided:
</para>
<itemizedlist>
The remaining L/R parts will be kept in the L/R channels of the DCP.
This may be useful to make near-field L/R mixes more compatible with
cinema audio systems.</listitem>
-<listitem>Stereo to 5.1 up-mixer A — this will take a stereo input and up-mix it to ‘fake’ 5.1. The input L/R are treated as follows:
-<itemizedlist>
-<listitem>DCP L is input L bandpass-filtered between 1.9kHz and 4.8kHz.</listitem>
-<listitem>DCP R is input R bandpass-filtered between 1.9kHz and 4.8kHz.</listitem>
-<listitem>DCP C is input L mixed with input R, taken down by 3dB and then bandpass-filtered between 150Hz and 1.9kHz.</listitem>
-<listitem>DCP Lfe is input L mixed with input R, taken down by 3dB and then bandpass-filtered between 20Hz and 150Hz.</listitem>
-<listitem>DCP Ls is input L bandpass-filtered between 4.8kHz and 20kHz.</listitem>
-<listitem>DCP Rs is input R bandpass-filtered between 4.8kHz and 20kHz.</listitem>
-</itemizedlist>
-<para>
-This upmixing algorithm is due to Gérald Maruccia.
-</para>
-</listitem>
-<listitem>Stereo to 5.1 up-mixer B — this uses a different approach:
-<itemizedlist>
- <listitem>DCP L is input L.</listitem>
- <listitem>DCP R is input R.</listitem>
- <listitem>DCP C is input L + input R taken down by 3dB.</listitem>
- <listitem>DCP Lfe is DCP C bandpass filtered between 20Hz and 150Hz.</listitem>
- <listitem>DCP Ls and Rs are input L - input R with a 20ms delay.</listitem>
-</itemizedlist>
-</listitem>
</itemizedlist>
-The up-mixers are not particularly advanced and should be used with care. You are strongly advised to check how the DCPs sound in a cinema if you have used one of DCP-o-matic's upmixers.
-
<!-- ============================================================== -->
<section xml:id="sec-reels">
<title>Reels</title>
<para>
From this dialogue you can select the required output format,
output file and, in the case of MP4, the quality of the output
- file. Higher quality files will, of course, be larger.
+ file (by setting the <ulink url="https://trac.ffmpeg.org/wiki/Encode/H.264#crf">CRF value</ulink>).
+ </para>
+
+ <para>
+ The useful range of CRF values is from 17 (high quality but large file size) to 28 (smaller file size and still reasonable quality).
+ </para>
+
+ <para>
+ The time needed to export, and the resulting size, depend partly on the DCP resolution set in the project. To change that, see chapter <xref linkend="ch-dcp"/>.
</para>
<para>
<para>
We suppose that we are trying to send a DCP to
-Alice's cinema without an attacker called Mallory being able to
+Alice's cinema without a third party called Mallory being able to
watch it himself.
</para>
We take our DCP's symmetric key and encrypt it using the public key of
Alice's projector. We send the result to Alice over email (using a
format called a Key Delivery Message, or KDM). Her projector then
-decrypts our message using its private key, yielding the magic
+decrypts our message using its private key, giving the
symmetric key which can decrypt the DCP.
</para>
</chapter>
<chapter xml:id="ch-player" xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en">
- <title>Playing and verifying DCPs</title>
+ <title>Playing DCPs</title>
<para>DCP-o-matic includes a DCP player, and although it requires a
very high-speed CPU to play DCPs in full resolution, it can also
resolution.
</para>
+</chapter>
+
+
+<chapter xml:id="ch-verifier" xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en">
+ <title>Verifying DCPs</title>
+
<para>
- The player also offers a simple DCP validator. To check a DCP,
+ The player also offers a DCP verifier. To check a DCP,
open it and then select <guilabel>Verify DCP</guilabel> from the
- <guilabel>Tools</guilabel> menu. This will run some basic checks to see if the DCP meets the required standards.
+ <guilabel>Tools</guilabel> menu.
+ </para>
+
+ <para>
+ The verifier will report three kinds of problems:
</para>
+ <itemizedlist>
+ <listitem><emphasis>Errors</emphasis> — serious problems with the DCP that are likely to cause problems on playback.</listitem>
+ <listitem><emphasis>Bv2.1 errors</emphasis> — errors described by the <ulink url="https://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=9161348">SMPTE Bv2.1 standard</ulink>.</listitem>
+ <listitem><emphasis>Warnings</emphasis> — small problems that may not matter.</listitem>
+ </itemizedlist>
+
+ <para>
+ The following sections list what the verifier checks for in each category.
+ </para>
+
+ <section>
+ <title>Errors</title>
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="verify_errors.xml"/>
+ </section>
+
+ <section>
+ <title>Bv2.1 errors</title>
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="verify_bv21_errors.xml"/>
+ </section>
+
+ <section>
+ <title>Warnings</title>
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="verify_warnings.xml"/>
+ </section>
+
</chapter>
+
+<!-- ============================================================== -->
+<chapter>
+<title>Keyboard shortcuts</title>
+<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="shortcuts.xml"/>
+</chapter>
+
+
<!-- ============================================================== -->
<chapter xml:id="ch-config" xmlns="http://docbook.org/ns/docbook" version="5.0" xml:lang="en">
<title>Configuration files</title>
projects / dcpomatic.git / blobdiff