hint (_("A few projectors have problems playing back very high bit-rate DCPs. It is a good idea to drop the JPEG2000 bandwidth down to about 200Mbit/s; this is unlikely to have any visible effect on the image."));
}
- if (film->interop() && film->video_frame_rate() != 24 && film->video_frame_rate() != 48) {
- string base = _("You are set up for an Interop DCP at a frame rate which is not officially supported. You are advised either to change the frame rate of your DCP or to make a SMPTE DCP instead.");
- base += " ";
- pair<double, double> range24 = film->speed_up_range (24);
- pair<double, double> range48 = film->speed_up_range (48);
- pair<double, double> range (max (range24.first, range48.first), min (range24.second, range48.second));
- string h;
- if (range.second > (29.0/24)) {
- h = base;
- h += _("However, setting your DCP frame rate to 24 or 48 will cause a significant speed-up of your content, and SMPTE DCPs are not supported by all projectors.");
- } else if (range.first < (24.0/29)) {
- h = base;
- h += _("However, setting your DCP frame rate to 24 or 48 will cause a significant slowdown of your content, and SMPTE DCPs are not supported by all projectors.");
- } else {
- h = _("You are set up for an Interop DCP at a frame rate which is not officially supported. You are advised either to change the frame rate of your DCP or to make a SMPTE DCP instead (although SMPTE DCPs are not supported by all projectors).");
+ switch (film->video_frame_rate()) {
+ case 24:
+ /* Fine */
+ break;
+ case 25:
+ {
+ /* You might want to go to 24 */
+ string base = String::compose(_("You are set up for a DCP at a frame rate of %1fps. This frame rate is not supported by all projectors. You may want to consider changing your frame rate to %2fps."), 25, 24);
+ if (film->interop()) {
+ base += " ";
+ base += _("If you do use 25fps you should change your DCP standard to SMPTE.");
}
-
- hint (h);
+ hint (base);
+ break;
}
-
- if (film->video_frame_rate() > 30) {
- hint (String::compose(_("You are set up for a DCP at a frame rate of %1. This frame rate is not supported by all projectors. You are advised to change the DCP frame rate to %2."), film->video_frame_rate(), film->video_frame_rate() / 2));
+ case 30:
+ /* 30fps: we can't really offer any decent solutions */
+ hint (_("You are set up for a DCP frame rate of 30fps, which is not supported by all projectors. Be aware that you may have compatibility problems."));
+ break;
+ case 48:
+ case 50:
+ case 60:
+ /* You almost certainly want to go to half frame rate */
+ hint (String::compose(_("You are set up for a DCP at a frame rate of %1fps. This frame rate is not supported by all projectors. You are advised to change the DCP frame rate to %2fps."), film->video_frame_rate(), film->video_frame_rate() / 2));
+ break;
}
optional<double> lowest_speed_up;