extend strict-i/o to include route outputs.
[ardour.git] / gtk2_ardour / editor_tempodisplay.cc
1 /*
2     Copyright (C) 2002 Paul Davis
3
4     This program is free software; you can redistribute it and/or modify
5     it under the terms of the GNU General Public License as published by
6     the Free Software Foundation; either version 2 of the License, or
7     (at your option) any later version.
8
9     This program is distributed in the hope that it will be useful,
10     but WITHOUT ANY WARRANTY; without even the implied warranty of
11     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12     GNU General Public License for more details.
13
14     You should have received a copy of the GNU General Public License
15     along with this program; if not, write to the Free Software
16     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17
18 */
19
20 #ifdef WAF_BUILD
21 #include "gtk2ardour-config.h"
22 #endif
23
24 #include <cstdio> // for sprintf, grrr
25 #include <cstdlib>
26 #include <cmath>
27 #include <string>
28 #include <climits>
29
30 #include "pbd/error.h"
31 #include "pbd/memento_command.h"
32
33 #include <gtkmm2ext/utils.h>
34 #include <gtkmm2ext/gtk_ui.h>
35
36 #include "ardour/session.h"
37 #include "ardour/tempo.h"
38 #include <gtkmm2ext/doi.h>
39 #include <gtkmm2ext/utils.h>
40
41 #include "canvas/canvas.h"
42 #include "canvas/item.h"
43 #include "canvas/line_set.h"
44
45 #include "editor.h"
46 #include "marker.h"
47 #include "tempo_dialog.h"
48 #include "rgb_macros.h"
49 #include "gui_thread.h"
50 #include "time_axis_view.h"
51 #include "tempo_lines.h"
52 #include "ui_config.h"
53
54 #include "i18n.h"
55
56 using namespace std;
57 using namespace ARDOUR;
58 using namespace PBD;
59 using namespace Gtk;
60 using namespace Gtkmm2ext;
61 using namespace Editing;
62
63 void
64 Editor::remove_metric_marks ()
65 {
66         /* don't delete these while handling events, just punt till the GUI is idle */
67
68         for (Marks::iterator x = metric_marks.begin(); x != metric_marks.end(); ++x) {
69                 delete_when_idle (*x);
70         }
71         metric_marks.clear ();
72 }
73
74 void
75 Editor::draw_metric_marks (const Metrics& metrics)
76 {
77
78         const MeterSection *ms;
79         const TempoSection *ts;
80         char buf[64];
81
82         remove_metric_marks ();
83
84         for (Metrics::const_iterator i = metrics.begin(); i != metrics.end(); ++i) {
85
86                 if ((ms = dynamic_cast<const MeterSection*>(*i)) != 0) {
87                         snprintf (buf, sizeof(buf), "%g/%g", ms->divisions_per_bar(), ms->note_divisor ());
88                         metric_marks.push_back (new MeterMarker (*this, *meter_group, UIConfiguration::instance().color ("meter marker"), buf,
89                                                                  *(const_cast<MeterSection*>(ms))));
90                 } else if ((ts = dynamic_cast<const TempoSection*>(*i)) != 0) {
91                         if (UIConfiguration::instance().get_allow_non_quarter_pulse()) {
92                                 snprintf (buf, sizeof (buf), "%.2f/%.0f", ts->beats_per_minute(), ts->note_type());
93                         } else {
94                                 snprintf (buf, sizeof (buf), "%.2f", ts->beats_per_minute());
95                         }
96                         metric_marks.push_back (new TempoMarker (*this, *tempo_group, UIConfiguration::instance().color ("tempo marker"), buf,
97                                                                  *(const_cast<TempoSection*>(ts))));
98                 }
99
100         }
101
102 }
103
104 void
105 Editor::tempo_map_changed (const PropertyChange& /*ignored*/)
106 {
107         if (!_session) {
108                 return;
109         }
110
111         ENSURE_GUI_THREAD (*this, &Editor::tempo_map_changed, ignored);
112
113         if (tempo_lines) {
114                 tempo_lines->tempo_map_changed();
115         }
116
117         ARDOUR::TempoMap::BBTPointList::const_iterator begin;
118         ARDOUR::TempoMap::BBTPointList::const_iterator end;
119
120         compute_current_bbt_points (leftmost_frame, leftmost_frame + current_page_samples(), begin, end);
121         _session->tempo_map().apply_with_metrics (*this, &Editor::draw_metric_marks); // redraw metric markers
122         draw_measures (begin, end);
123         update_tempo_based_rulers (begin, end);
124 }
125
126 void
127 Editor::redisplay_tempo (bool immediate_redraw)
128 {
129         if (!_session) {
130                 return;
131         }
132
133         if (immediate_redraw) {
134                 ARDOUR::TempoMap::BBTPointList::const_iterator current_bbt_points_begin;
135                 ARDOUR::TempoMap::BBTPointList::const_iterator current_bbt_points_end;
136
137                 compute_current_bbt_points (leftmost_frame, leftmost_frame + current_page_samples(),
138                                             current_bbt_points_begin, current_bbt_points_end);
139                 draw_measures (current_bbt_points_begin, current_bbt_points_end);
140                 update_tempo_based_rulers (current_bbt_points_begin, current_bbt_points_end); // redraw rulers and measures
141
142         } else {
143                 Glib::signal_idle().connect (sigc::bind_return (sigc::bind (sigc::mem_fun (*this, &Editor::redisplay_tempo), true), false));
144         }
145 }
146
147 void
148 Editor::compute_current_bbt_points (framepos_t leftmost, framepos_t rightmost,
149                                     ARDOUR::TempoMap::BBTPointList::const_iterator& begin,
150                                     ARDOUR::TempoMap::BBTPointList::const_iterator& end)
151 {
152         if (!_session) {
153                 return;
154         }
155
156         /* prevent negative values of leftmost from creeping into tempomap
157          */
158
159         _session->tempo_map().get_grid (begin, end, max (leftmost, (framepos_t) 0), rightmost);
160 }
161
162 void
163 Editor::hide_measures ()
164 {
165         if (tempo_lines) {
166                 tempo_lines->hide();
167         }
168 }
169
170 void
171 Editor::draw_measures (ARDOUR::TempoMap::BBTPointList::const_iterator& begin,
172                        ARDOUR::TempoMap::BBTPointList::const_iterator& end)
173 {
174         if (_session == 0 || _show_measures == false || distance (begin, end) == 0) {
175                 return;
176         }
177
178         if (tempo_lines == 0) {
179                 tempo_lines = new TempoLines (time_line_group, ArdourCanvas::LineSet::Vertical);
180         }
181
182         const unsigned divisions = get_grid_beat_divisions(leftmost_frame);
183         tempo_lines->draw (begin, end, divisions, leftmost_frame, _session->frame_rate());
184 }
185
186 void
187 Editor::mouse_add_new_tempo_event (framepos_t frame)
188 {
189         if (_session == 0) {
190                 return;
191         }
192
193         TempoMap& map(_session->tempo_map());
194         TempoDialog tempo_dialog (map, frame, _("add"));
195
196         //this causes compiz to display no border.
197         //tempo_dialog.signal_realize().connect (sigc::bind (sigc::ptr_fun (set_decoration), &tempo_dialog, Gdk::WMDecoration (Gdk::DECOR_BORDER|Gdk::DECOR_RESIZEH)));
198
199         switch (tempo_dialog.run()) {
200         case RESPONSE_ACCEPT:
201                 break;
202         default:
203                 return;
204         }
205
206         double bpm = 0;
207         Timecode::BBT_Time requested;
208
209         bpm = tempo_dialog.get_bpm ();
210         double nt = tempo_dialog.get_note_type();
211         bpm = max (0.01, bpm);
212
213         tempo_dialog.get_bbt_time (requested);
214
215         begin_reversible_command (_("add tempo mark"));
216         XMLNode &before = map.get_state();
217         map.add_tempo (Tempo (bpm,nt), requested);
218         XMLNode &after = map.get_state();
219         _session->add_command(new MementoCommand<TempoMap>(map, &before, &after));
220         commit_reversible_command ();
221
222         //map.dump (cerr);
223 }
224
225 void
226 Editor::mouse_add_new_meter_event (framepos_t frame)
227 {
228         if (_session == 0) {
229                 return;
230         }
231
232
233         TempoMap& map(_session->tempo_map());
234         MeterDialog meter_dialog (map, frame, _("add"));
235
236         //this causes compiz to display no border..
237         //meter_dialog.signal_realize().connect (sigc::bind (sigc::ptr_fun (set_decoration), &meter_dialog, Gdk::WMDecoration (Gdk::DECOR_BORDER|Gdk::DECOR_RESIZEH)));
238
239         switch (meter_dialog.run ()) {
240         case RESPONSE_ACCEPT:
241                 break;
242         default:
243                 return;
244         }
245
246         double bpb = meter_dialog.get_bpb ();
247         bpb = max (1.0, bpb); // XXX is this a reasonable limit?
248
249         double note_type = meter_dialog.get_note_type ();
250         Timecode::BBT_Time requested;
251
252         meter_dialog.get_bbt_time (requested);
253
254         begin_reversible_command (_("add meter mark"));
255         XMLNode &before = map.get_state();
256         map.add_meter (Meter (bpb, note_type), requested);
257         _session->add_command(new MementoCommand<TempoMap>(map, &before, &map.get_state()));
258         commit_reversible_command ();
259
260         //map.dump (cerr);
261 }
262
263 void
264 Editor::remove_tempo_marker (ArdourCanvas::Item* item)
265 {
266         ArdourMarker* marker;
267         TempoMarker* tempo_marker;
268
269         if ((marker = reinterpret_cast<ArdourMarker *> (item->get_data ("marker"))) == 0) {
270                 fatal << _("programming error: tempo marker canvas item has no marker object pointer!") << endmsg;
271                 abort(); /*NOTREACHED*/
272         }
273
274         if ((tempo_marker = dynamic_cast<TempoMarker*> (marker)) == 0) {
275                 fatal << _("programming error: marker for tempo is not a tempo marker!") << endmsg;
276                 abort(); /*NOTREACHED*/
277         }
278
279         if (tempo_marker->tempo().movable()) {
280                 Glib::signal_idle().connect (sigc::bind (sigc::mem_fun(*this, &Editor::real_remove_tempo_marker), &tempo_marker->tempo()));
281         }
282 }
283
284 void
285 Editor::edit_meter_section (MeterSection* section)
286 {
287         MeterDialog meter_dialog (*section, _("done"));
288
289         switch (meter_dialog.run()) {
290         case RESPONSE_ACCEPT:
291                 break;
292         default:
293                 return;
294         }
295
296         double bpb = meter_dialog.get_bpb ();
297         bpb = max (1.0, bpb); // XXX is this a reasonable limit?
298
299         double note_type = meter_dialog.get_note_type ();
300
301         Timecode::BBT_Time when;
302         meter_dialog.get_bbt_time(when);
303
304         begin_reversible_command (_("replace tempo mark"));
305         XMLNode &before = _session->tempo_map().get_state();
306         _session->tempo_map().replace_meter (*section, Meter (bpb, note_type), when);
307         XMLNode &after = _session->tempo_map().get_state();
308         _session->add_command(new MementoCommand<TempoMap>(_session->tempo_map(), &before, &after));
309         commit_reversible_command ();
310 }
311
312 void
313 Editor::edit_tempo_section (TempoSection* section)
314 {
315         TempoDialog tempo_dialog (*section, _("done"));
316
317         switch (tempo_dialog.run ()) {
318         case RESPONSE_ACCEPT:
319                 break;
320         default:
321                 return;
322         }
323
324         double bpm = tempo_dialog.get_bpm ();
325         double nt = tempo_dialog.get_note_type ();
326         Timecode::BBT_Time when;
327         tempo_dialog.get_bbt_time(when);
328         bpm = max (0.01, bpm);
329
330         begin_reversible_command (_("replace tempo mark"));
331         XMLNode &before = _session->tempo_map().get_state();
332         _session->tempo_map().replace_tempo (*section, Tempo (bpm, nt), when);
333         XMLNode &after = _session->tempo_map().get_state();
334         _session->add_command (new MementoCommand<TempoMap>(_session->tempo_map(), &before, &after));
335         commit_reversible_command ();
336 }
337
338 void
339 Editor::edit_tempo_marker (TempoMarker& tm)
340 {
341         edit_tempo_section (&tm.tempo());
342 }
343
344 void
345 Editor::edit_meter_marker (MeterMarker& mm)
346 {
347         edit_meter_section (&mm.meter());
348 }
349
350 gint
351 Editor::real_remove_tempo_marker (TempoSection *section)
352 {
353         begin_reversible_command (_("remove tempo mark"));
354         XMLNode &before = _session->tempo_map().get_state();
355         _session->tempo_map().remove_tempo (*section, true);
356         XMLNode &after = _session->tempo_map().get_state();
357         _session->add_command(new MementoCommand<TempoMap>(_session->tempo_map(), &before, &after));
358         commit_reversible_command ();
359
360         return FALSE;
361 }
362
363 void
364 Editor::remove_meter_marker (ArdourCanvas::Item* item)
365 {
366         ArdourMarker* marker;
367         MeterMarker* meter_marker;
368
369         if ((marker = reinterpret_cast<ArdourMarker *> (item->get_data ("marker"))) == 0) {
370                 fatal << _("programming error: meter marker canvas item has no marker object pointer!") << endmsg;
371                 abort(); /*NOTREACHED*/
372         }
373
374         if ((meter_marker = dynamic_cast<MeterMarker*> (marker)) == 0) {
375                 fatal << _("programming error: marker for meter is not a meter marker!") << endmsg;
376                 abort(); /*NOTREACHED*/
377         }
378
379         if (meter_marker->meter().movable()) {
380           Glib::signal_idle().connect (sigc::bind (sigc::mem_fun(*this, &Editor::real_remove_meter_marker), &meter_marker->meter()));
381         }
382 }
383
384 gint
385 Editor::real_remove_meter_marker (MeterSection *section)
386 {
387         begin_reversible_command (_("remove tempo mark"));
388         XMLNode &before = _session->tempo_map().get_state();
389         _session->tempo_map().remove_meter (*section, true);
390         XMLNode &after = _session->tempo_map().get_state();
391         _session->add_command(new MementoCommand<TempoMap>(_session->tempo_map(), &before, &after));
392         commit_reversible_command ();
393
394         return FALSE;
395 }