Tempo ramps - massively speed up dragging of tempo marks.
[ardour.git] / gtk2_ardour / editor_tempodisplay.cc
1 /*
2     Copyright (C) 2002 Paul Davis
3
4     This program is free software; you can redistribute it and/or modify
5     it under the terms of the GNU General Public License as published by
6     the Free Software Foundation; either version 2 of the License, or
7     (at your option) any later version.
8
9     This program is distributed in the hope that it will be useful,
10     but WITHOUT ANY WARRANTY; without even the implied warranty of
11     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12     GNU General Public License for more details.
13
14     You should have received a copy of the GNU General Public License
15     along with this program; if not, write to the Free Software
16     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17
18 */
19
20 #ifdef WAF_BUILD
21 #include "gtk2ardour-config.h"
22 #endif
23
24 #include <cstdio> // for sprintf, grrr
25 #include <cstdlib>
26 #include <cmath>
27 #include <string>
28 #include <climits>
29
30 #include "pbd/error.h"
31 #include "pbd/memento_command.h"
32
33 #include <gtkmm2ext/utils.h>
34 #include <gtkmm2ext/gtk_ui.h>
35
36 #include "ardour/session.h"
37 #include "ardour/tempo.h"
38 #include <gtkmm2ext/doi.h>
39 #include <gtkmm2ext/utils.h>
40
41 #include "canvas/canvas.h"
42 #include "canvas/item.h"
43 #include "canvas/line_set.h"
44
45 #include "editor.h"
46 #include "marker.h"
47 #include "tempo_dialog.h"
48 #include "rgb_macros.h"
49 #include "gui_thread.h"
50 #include "time_axis_view.h"
51 #include "tempo_lines.h"
52 #include "ui_config.h"
53
54 #include "i18n.h"
55
56 using namespace std;
57 using namespace ARDOUR;
58 using namespace PBD;
59 using namespace Gtk;
60 using namespace Gtkmm2ext;
61 using namespace Editing;
62
63 void
64 Editor::remove_metric_marks ()
65 {
66         /* don't delete these while handling events, just punt till the GUI is idle */
67
68         for (Marks::iterator x = metric_marks.begin(); x != metric_marks.end(); ++x) {
69                 delete_when_idle (*x);
70         }
71         metric_marks.clear ();
72 }
73
74 void
75 Editor::draw_metric_marks (const Metrics& metrics)
76 {
77
78         const MeterSection *ms;
79         const TempoSection *ts;
80         char buf[64];
81
82         remove_metric_marks ();
83
84         for (Metrics::const_iterator i = metrics.begin(); i != metrics.end(); ++i) {
85
86                 if ((ms = dynamic_cast<const MeterSection*>(*i)) != 0) {
87                         snprintf (buf, sizeof(buf), "%g/%g", ms->divisions_per_bar(), ms->note_divisor ());
88                         metric_marks.push_back (new MeterMarker (*this, *meter_group, UIConfiguration::instance().color ("meter marker"), buf,
89                                                                  *(const_cast<MeterSection*>(ms))));
90                 } else if ((ts = dynamic_cast<const TempoSection*>(*i)) != 0) {
91                         if (UIConfiguration::instance().get_allow_non_quarter_pulse()) {
92                                 snprintf (buf, sizeof (buf), "%.2f/%.0f", ts->beats_per_minute(), ts->note_type());
93                         } else {
94                                 snprintf (buf, sizeof (buf), "%.2f", ts->beats_per_minute());
95                         }
96                         metric_marks.push_back (new TempoMarker (*this, *tempo_group, UIConfiguration::instance().color ("tempo marker"), buf,
97                                                                  *(const_cast<TempoSection*>(ts))));
98                 }
99
100         }
101
102 }
103
104
105 void
106 Editor::tempo_map_changed (const PropertyChange& /*ignored*/)
107 {
108         if (!_session) {
109                 return;
110         }
111
112         ENSURE_GUI_THREAD (*this, &Editor::tempo_map_changed, ignored);
113
114         if (tempo_lines) {
115                 tempo_lines->tempo_map_changed();
116         }
117
118         std::vector<TempoMap::BBTPoint> grid;
119
120         compute_current_bbt_points (grid, leftmost_frame, leftmost_frame + current_page_samples());
121         _session->tempo_map().apply_with_metrics (*this, &Editor::draw_metric_marks); // redraw metric markers
122         draw_measures (grid);
123         update_tempo_based_rulers (grid);
124 }
125
126 void
127 Editor::marker_position_changed ()
128 {
129         if (!_session) {
130                 return;
131         }
132
133         ENSURE_GUI_THREAD (*this, &Editor::tempo_map_changed);
134
135         if (tempo_lines) {
136                 tempo_lines->tempo_map_changed();
137         }
138         TempoMarker* tempo_marker;
139         MeterMarker* meter_marker;
140         const TempoSection *ts;
141         const MeterSection *ms;
142
143         for (Marks::iterator x = metric_marks.begin(); x != metric_marks.end(); ++x) {
144                 if ((tempo_marker = dynamic_cast<TempoMarker*> (*x)) != 0) {
145                         if ((ts = &tempo_marker->tempo()) != 0) {
146                                 cerr << "tempo section found for tempo marker " << endl;
147                                 tempo_marker->set_position (ts->frame ());
148                         }
149                 }
150                 if ((meter_marker = dynamic_cast<MeterMarker*> (*x)) != 0) {
151                         if ((ms = &meter_marker->meter()) != 0) {
152                                 cerr << "meter section found for meter marker " << endl;
153                                 meter_marker->set_position (ms->frame ());
154                         }
155                 }
156         }
157         std::vector<TempoMap::BBTPoint> grid;
158         compute_current_bbt_points (grid, leftmost_frame, leftmost_frame + current_page_samples());
159         draw_measures (grid);
160         update_tempo_based_rulers (grid);
161 }
162
163 void
164 Editor::redisplay_tempo (bool immediate_redraw)
165 {
166         if (!_session) {
167                 return;
168         }
169
170         if (immediate_redraw) {
171                 std::vector<TempoMap::BBTPoint> grid;
172
173                 compute_current_bbt_points (grid, leftmost_frame, leftmost_frame + current_page_samples());
174                 draw_measures (grid);
175                 update_tempo_based_rulers (grid); // redraw rulers and measure lines
176
177         } else {
178                 Glib::signal_idle().connect (sigc::bind_return (sigc::bind (sigc::mem_fun (*this, &Editor::redisplay_tempo), true), false));
179         }
180 }
181
182 /* computes a grid starting a beat before and ending a beat after leftmost and rightmost respectively */
183 void
184 Editor::compute_current_bbt_points (std::vector<TempoMap::BBTPoint>& grid, framepos_t leftmost, framepos_t rightmost)
185 {
186         if (!_session) {
187                 return;
188         }
189
190         framecnt_t beat_before_lower_pos = _session->tempo_map().frame_at_beat (floor(_session->tempo_map().beat_at_frame (leftmost)));
191         framecnt_t beat_after_upper_pos = _session->tempo_map().frame_at_beat (floor (_session->tempo_map().beat_at_frame (rightmost)) + 1.0);
192
193         /* prevent negative values of leftmost from creeping into tempomap
194          */
195         _session->tempo_map().get_grid (grid, max (beat_before_lower_pos, (framepos_t) 0), beat_after_upper_pos);
196 }
197
198 void
199 Editor::hide_measures ()
200 {
201         if (tempo_lines) {
202                 tempo_lines->hide();
203         }
204 }
205
206 void
207 Editor::draw_measures (std::vector<ARDOUR::TempoMap::BBTPoint>& grid)
208 {
209         if (_session == 0 || _show_measures == false || distance (grid.begin(), grid.end()) == 0) {
210                 return;
211         }
212
213         if (tempo_lines == 0) {
214                 tempo_lines = new TempoLines (time_line_group, ArdourCanvas::LineSet::Vertical);
215         }
216
217         const unsigned divisions = get_grid_beat_divisions(leftmost_frame);
218         tempo_lines->draw (grid, divisions, leftmost_frame, _session->frame_rate());
219 }
220
221 void
222 Editor::mouse_add_new_tempo_event (framepos_t frame)
223 {
224         if (_session == 0) {
225                 return;
226         }
227
228         TempoMap& map(_session->tempo_map());
229         TempoDialog tempo_dialog (map, frame, _("add"));
230
231         //this causes compiz to display no border.
232         //tempo_dialog.signal_realize().connect (sigc::bind (sigc::ptr_fun (set_decoration), &tempo_dialog, Gdk::WMDecoration (Gdk::DECOR_BORDER|Gdk::DECOR_RESIZEH)));
233
234         switch (tempo_dialog.run()) {
235         case RESPONSE_ACCEPT:
236                 break;
237         default:
238                 return;
239         }
240
241         double bpm = 0;
242         Timecode::BBT_Time requested;
243
244         bpm = tempo_dialog.get_bpm ();
245         double nt = tempo_dialog.get_note_type();
246         bpm = max (0.01, bpm);
247
248         tempo_dialog.get_bbt_time (requested);
249
250         begin_reversible_command (_("add tempo mark"));
251         XMLNode &before = map.get_state();
252         map.add_tempo (Tempo (bpm,nt), requested, tempo_dialog.get_tempo_type());
253         XMLNode &after = map.get_state();
254         _session->add_command(new MementoCommand<TempoMap>(map, &before, &after));
255         commit_reversible_command ();
256
257         //map.dump (cerr);
258 }
259
260 void
261 Editor::mouse_add_new_meter_event (framepos_t frame)
262 {
263         if (_session == 0) {
264                 return;
265         }
266
267
268         TempoMap& map(_session->tempo_map());
269         MeterDialog meter_dialog (map, frame, _("add"));
270
271         //this causes compiz to display no border..
272         //meter_dialog.signal_realize().connect (sigc::bind (sigc::ptr_fun (set_decoration), &meter_dialog, Gdk::WMDecoration (Gdk::DECOR_BORDER|Gdk::DECOR_RESIZEH)));
273
274         switch (meter_dialog.run ()) {
275         case RESPONSE_ACCEPT:
276                 break;
277         default:
278                 return;
279         }
280
281         double bpb = meter_dialog.get_bpb ();
282         bpb = max (1.0, bpb); // XXX is this a reasonable limit?
283
284         double note_type = meter_dialog.get_note_type ();
285         Timecode::BBT_Time requested;
286
287         meter_dialog.get_bbt_time (requested);
288
289         begin_reversible_command (_("add meter mark"));
290         XMLNode &before = map.get_state();
291         map.add_meter (Meter (bpb, note_type), requested);
292         _session->add_command(new MementoCommand<TempoMap>(map, &before, &map.get_state()));
293         commit_reversible_command ();
294
295         //map.dump (cerr);
296 }
297
298 void
299 Editor::remove_tempo_marker (ArdourCanvas::Item* item)
300 {
301         ArdourMarker* marker;
302         TempoMarker* tempo_marker;
303
304         if ((marker = reinterpret_cast<ArdourMarker *> (item->get_data ("marker"))) == 0) {
305                 fatal << _("programming error: tempo marker canvas item has no marker object pointer!") << endmsg;
306                 abort(); /*NOTREACHED*/
307         }
308
309         if ((tempo_marker = dynamic_cast<TempoMarker*> (marker)) == 0) {
310                 fatal << _("programming error: marker for tempo is not a tempo marker!") << endmsg;
311                 abort(); /*NOTREACHED*/
312         }
313
314         if (tempo_marker->tempo().movable()) {
315                 Glib::signal_idle().connect (sigc::bind (sigc::mem_fun(*this, &Editor::real_remove_tempo_marker), &tempo_marker->tempo()));
316         }
317 }
318
319 void
320 Editor::edit_meter_section (MeterSection* section)
321 {
322         MeterDialog meter_dialog (*section, _("done"));
323
324         switch (meter_dialog.run()) {
325         case RESPONSE_ACCEPT:
326                 break;
327         default:
328                 return;
329         }
330
331         double bpb = meter_dialog.get_bpb ();
332         bpb = max (1.0, bpb); // XXX is this a reasonable limit?
333
334         double note_type = meter_dialog.get_note_type ();
335
336         Timecode::BBT_Time when;
337         meter_dialog.get_bbt_time(when);
338
339         begin_reversible_command (_("replace tempo mark"));
340         XMLNode &before = _session->tempo_map().get_state();
341         _session->tempo_map().replace_meter (*section, Meter (bpb, note_type), when);
342         XMLNode &after = _session->tempo_map().get_state();
343         _session->add_command(new MementoCommand<TempoMap>(_session->tempo_map(), &before, &after));
344         commit_reversible_command ();
345 }
346
347 void
348 Editor::edit_tempo_section (TempoSection* section)
349 {
350         TempoDialog tempo_dialog (*section, _("done"));
351
352         switch (tempo_dialog.run ()) {
353         case RESPONSE_ACCEPT:
354                 break;
355         default:
356                 return;
357         }
358
359         double bpm = tempo_dialog.get_bpm ();
360         double nt = tempo_dialog.get_note_type ();
361         Timecode::BBT_Time when;
362         tempo_dialog.get_bbt_time(when);
363         bpm = max (0.01, bpm);
364
365         begin_reversible_command (_("replace tempo mark"));
366         XMLNode &before = _session->tempo_map().get_state();
367         _session->tempo_map().replace_tempo (*section, Tempo (bpm, nt), when, tempo_dialog.get_tempo_type());
368         XMLNode &after = _session->tempo_map().get_state();
369         _session->add_command (new MementoCommand<TempoMap>(_session->tempo_map(), &before, &after));
370         commit_reversible_command ();
371 }
372
373 void
374 Editor::edit_tempo_marker (TempoMarker& tm)
375 {
376         edit_tempo_section (&tm.tempo());
377 }
378
379 void
380 Editor::edit_meter_marker (MeterMarker& mm)
381 {
382         edit_meter_section (&mm.meter());
383 }
384
385 gint
386 Editor::real_remove_tempo_marker (TempoSection *section)
387 {
388         begin_reversible_command (_("remove tempo mark"));
389         XMLNode &before = _session->tempo_map().get_state();
390         _session->tempo_map().remove_tempo (*section, true);
391         XMLNode &after = _session->tempo_map().get_state();
392         _session->add_command(new MementoCommand<TempoMap>(_session->tempo_map(), &before, &after));
393         commit_reversible_command ();
394
395         return FALSE;
396 }
397
398 void
399 Editor::remove_meter_marker (ArdourCanvas::Item* item)
400 {
401         ArdourMarker* marker;
402         MeterMarker* meter_marker;
403
404         if ((marker = reinterpret_cast<ArdourMarker *> (item->get_data ("marker"))) == 0) {
405                 fatal << _("programming error: meter marker canvas item has no marker object pointer!") << endmsg;
406                 abort(); /*NOTREACHED*/
407         }
408
409         if ((meter_marker = dynamic_cast<MeterMarker*> (marker)) == 0) {
410                 fatal << _("programming error: marker for meter is not a meter marker!") << endmsg;
411                 abort(); /*NOTREACHED*/
412         }
413
414         if (meter_marker->meter().movable()) {
415           Glib::signal_idle().connect (sigc::bind (sigc::mem_fun(*this, &Editor::real_remove_meter_marker), &meter_marker->meter()));
416         }
417 }
418
419 gint
420 Editor::real_remove_meter_marker (MeterSection *section)
421 {
422         begin_reversible_command (_("remove tempo mark"));
423         XMLNode &before = _session->tempo_map().get_state();
424         _session->tempo_map().remove_meter (*section, true);
425         XMLNode &after = _session->tempo_map().get_state();
426         _session->add_command(new MementoCommand<TempoMap>(_session->tempo_map(), &before, &after));
427         commit_reversible_command ();
428
429         return FALSE;
430 }