#include "midi_tracer.h"
#include "rc_option_editor.h"
#include "sfdb_ui.h"
-#include "theme_manager.h"
#include "tooltips.h"
#include "ui_config.h"
#include "utils.h"
, _click_browse_button (_("Browse..."))
, _click_emphasis_browse_button (_("Browse..."))
{
+ // TODO get rid of GTK -> use OptionEditor Widgets
Table* t = &table;
- Label* l = manage (left_aligned_label (_("Emphasis on first beat:")));
+ Label* l = manage (left_aligned_label (_("Emphasis on first beat")));
_use_emphasis_on_click_check_button.add (*l);
t->attach (_use_emphasis_on_click_check_button, 1, 3, 0, 1, FILL);
_use_emphasis_on_click_check_button.signal_toggled().connect (
sigc::mem_fun (*this, &ClickOptions::use_emphasis_on_click_toggled));
- l = manage (left_aligned_label (_("Use default Click:")));
+ l = manage (left_aligned_label (_("Use built-in default sounds")));
_use_default_click_check_button.add (*l);
t->attach (_use_default_click_check_button, 1, 3, 1, 2, FILL);
_use_default_click_check_button.signal_toggled().connect (
sigc::mem_fun (*this, &ClickOptions::use_default_click_toggled));
- l = manage (left_aligned_label (_("Click audio file:")));
+ l = manage (left_aligned_label (_("Audio file:")));
t->attach (*l, 1, 2, 2, 3, FILL);
t->attach (_click_path_entry, 2, 3, 2, 3, FILL);
_click_browse_button.signal_clicked ().connect (
sigc::mem_fun (*this, &ClickOptions::click_browse_clicked));
t->attach (_click_browse_button, 3, 4, 2, 3, FILL);
- l = manage (left_aligned_label (_("Click emphasis audio file:")));
+ l = manage (left_aligned_label (_("Emphasis audio file:")));
t->attach (*l, 1, 2, 3, 4, FILL);
t->attach (_click_emphasis_path_entry, 2, 3, 3, 4, FILL);
_click_emphasis_browse_button.signal_clicked ().connect (
sigc::mem_fun (*this, &ClickOptions::click_emphasis_browse_clicked));
t->attach (_click_emphasis_browse_button, 3, 4, 3, 4, FILL);
- FaderOption* fo = new FaderOption (
+ _click_fader = new FaderOption (
"click-gain",
- _("Click gain level"),
+ _("Gain level"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_click_gain),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_click_gain)
);
- fo->add_to_page (this);
- fo->set_state_from_config ();
+ _click_fader->add_to_page (this);
+ _click_fader->set_state_from_config ();
_click_path_entry.signal_activate().connect (sigc::mem_fun (*this, &ClickOptions::click_changed));
_click_emphasis_path_entry.signal_activate().connect (sigc::mem_fun (*this, &ClickOptions::click_emphasis_changed));
} else if (p == "use-click-emphasis") {
bool x = _rc_config->get_use_click_emphasis ();
_use_emphasis_on_click_check_button.set_active (x);
+ } else if (p == "click-gain") {
+ _click_fader->set_state_from_config ();
}
}
Entry _click_emphasis_path_entry;
Button _click_browse_button;
Button _click_emphasis_browse_button;
+ FaderOption* _click_fader;
};
class UndoOptions : public OptionEditorComponent
_limit_undo_button (_("Limit undo history to")),
_save_undo_button (_("Save undo history of"))
{
+ // TODO get rid of GTK -> use OptionEditor SpinOption
_limit_undo_spin.set_range (0, 512);
_limit_undo_spin.set_increments (1, 10);
class KeyboardOptions : public OptionEditorMiniPage
{
public:
- KeyboardOptions () :
- _delete_button_adjustment (3, 1, 12),
- _delete_button_spin (_delete_button_adjustment),
- _edit_button_adjustment (3, 1, 5),
- _edit_button_spin (_edit_button_adjustment),
- _insert_note_button_adjustment (3, 1, 5),
- _insert_note_button_spin (_insert_note_button_adjustment)
+ KeyboardOptions ()
+ : _delete_button_adjustment (3, 1, 12)
+ , _delete_button_spin (_delete_button_adjustment)
+ , _edit_button_adjustment (3, 1, 5)
+ , _edit_button_spin (_edit_button_adjustment)
+ , _insert_note_button_adjustment (3, 1, 5)
+ , _insert_note_button_spin (_insert_note_button_adjustment)
{
+ // TODO get rid of GTK -> use OptionEditor Widgets
+
const std::string restart_msg = _("\nChanges to this setting will only persist after your project has been saved.");
/* internationalize and prepare for use with combos */
set_popdown_strings (_edit_modifier_combo, dumb);
_edit_modifier_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::edit_modifier_chosen));
Gtkmm2ext::UI::instance()->set_tip (_edit_modifier_combo,
- (string_compose (_("<b>Recommended Setting: %1 + button 3 (right mouse button)</b>%2"), Keyboard::primary_modifier_name (), restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == Keyboard::edit_modifier ()) {
- _edit_modifier_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
+ (string_compose (_("<b>Recommended Setting: %1 + button 3 (right mouse button)</b>%2"), Keyboard::primary_modifier_name (), restart_msg)));
Table* t = &table;
_keyboard_layout_selector.set_active_text (Keyboard::current_binding_name());
_keyboard_layout_selector.signal_changed().connect (sigc::mem_fun (*this, &KeyboardOptions::bindings_changed));
- t->attach (*l, col, col + 2, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col + 1, col + 2, row, row + 1, FILL, FILL);
t->attach (_keyboard_layout_selector, col + 2, col + 3, row, row + 1, FILL | EXPAND, FILL);
++row;
l = manage (left_aligned_label (_("Edit using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
t->attach (_edit_modifier_combo, col + 1, col + 2, row, row + 1, FILL | EXPAND, FILL);
l = manage (new Label (_("+ button")));
l->set_name ("OptionsLabel");
- t->attach (*l, col + 3, col + 4, row, row + 1, FILL | EXPAND, FILL);
- t->attach (_edit_button_spin, col + 4, col + 5, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col + 3, col + 4, row, row + 1, FILL, FILL);
+ t->attach (_edit_button_spin, col + 4, col + 5, row, row + 1, SHRINK , FILL);
_edit_button_spin.set_name ("OptionsEntry");
- _edit_button_adjustment.set_value (Keyboard::edit_button());
_edit_button_adjustment.signal_value_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::edit_button_changed));
++row;
set_popdown_strings (_delete_modifier_combo, dumb);
_delete_modifier_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::delete_modifier_chosen));
Gtkmm2ext::UI::instance()->set_tip (_delete_modifier_combo,
- (string_compose (_("<b>Recommended Setting: %1 + button 3 (right mouse button)</b>%2"), Keyboard::tertiary_modifier_name (), restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == Keyboard::delete_modifier ()) {
- _delete_modifier_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
+ (string_compose (_("<b>Recommended Setting: %1 + button 3 (right mouse button)</b>%2"), Keyboard::tertiary_modifier_name (), restart_msg)));
l = manage (left_aligned_label (_("Delete using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
t->attach (_delete_modifier_combo, col + 1, col + 2, row, row + 1, FILL | EXPAND, FILL);
l = manage (new Label (_("+ button")));
l->set_name ("OptionsLabel");
- t->attach (*l, col + 3, col + 4, row, row + 1, FILL | EXPAND, FILL);
- t->attach (_delete_button_spin, col + 4, col + 5, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col + 3, col + 4, row, row + 1, FILL, FILL);
+ t->attach (_delete_button_spin, col + 4, col + 5, row, row + 1, SHRINK, FILL);
_delete_button_spin.set_name ("OptionsEntry");
- _delete_button_adjustment.set_value (Keyboard::delete_button());
_delete_button_adjustment.signal_value_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::delete_button_changed));
++row;
set_popdown_strings (_insert_note_modifier_combo, dumb);
_insert_note_modifier_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::insert_note_modifier_chosen));
Gtkmm2ext::UI::instance()->set_tip (_insert_note_modifier_combo,
- (string_compose (_("<b>Recommended Setting: %1 + button 1 (left mouse button)</b>%2"), Keyboard::primary_modifier_name (), restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == Keyboard::insert_note_modifier ()) {
- _insert_note_modifier_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
+ (string_compose (_("<b>Recommended Setting: %1 + button 1 (left mouse button)</b>%2"), Keyboard::primary_modifier_name (), restart_msg)));
l = manage (left_aligned_label (_("Insert note using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
t->attach (_insert_note_modifier_combo, col + 1, col + 2, row, row + 1, FILL | EXPAND, FILL);
l = manage (new Label (_("+ button")));
l->set_name ("OptionsLabel");
- t->attach (*l, col + 3, col + 4, row, row + 1, FILL | EXPAND, FILL);
- t->attach (_insert_note_button_spin, col + 4, col + 5, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col + 3, col + 4, row, row + 1, FILL, FILL);
+ t->attach (_insert_note_button_spin, col + 4, col + 5, row, row + 1, SHRINK, FILL);
_insert_note_button_spin.set_name ("OptionsEntry");
- _insert_note_button_adjustment.set_value (Keyboard::insert_note_button());
_insert_note_button_adjustment.signal_value_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::insert_note_button_changed));
++row;
Keyboard::primary_modifier_name (),
#endif
restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == (guint) Keyboard::CopyModifier) {
- _copy_modifier_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
l = manage (left_aligned_label (_("Copy items using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
t->attach (_copy_modifier_combo, col + 1, col + 2, row, row + 1, FILL | EXPAND, FILL);
++row;
/* constraint modifier */
set_popdown_strings (_constraint_modifier_combo, dumb);
_constraint_modifier_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::constraint_modifier_chosen));
- std::string mod_str = string_compose (X_("%1-%2"), Keyboard::primary_modifier_name (), Keyboard::level4_modifier_name ());
Gtkmm2ext::UI::instance()->set_tip (_constraint_modifier_combo,
(string_compose (_("<b>Recommended Setting: %1</b>%2"),
#ifdef __APPLE__
Keyboard::tertiary_modifier_name (),
#endif
restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == (guint) ArdourKeyboard::constraint_modifier ()) {
- _constraint_modifier_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
l = manage (left_aligned_label (_("Constrain drag using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
t->attach (_constraint_modifier_combo, col + 1, col + 2, row, row + 1, FILL | EXPAND, FILL);
++row;
set_popdown_strings (_push_points_combo, dumb);
_push_points_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::push_points_modifier_chosen));
- mod_str = string_compose (X_("%1-%2"), Keyboard::primary_modifier_name (), Keyboard::level4_modifier_name ());
+ std::string mod_str = string_compose (X_("%1-%2"), Keyboard::primary_modifier_name (), Keyboard::level4_modifier_name ());
Gtkmm2ext::UI::instance()->set_tip (_push_points_combo,
- (string_compose (_("<b>Recommended Setting: %1</b>%2"), mod_str, restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == (guint) ArdourKeyboard::push_points_modifier ()) {
- _push_points_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
+ (string_compose (_("<b>Recommended Setting: %1</b>%2"), mod_str, restart_msg)));
l = manage (left_aligned_label (_("Push points using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
t->attach (_push_points_combo, col + 1, col + 2, row, row + 1, FILL | EXPAND, FILL);
++row;
set_popdown_strings (_trim_contents_combo, dumb);
_trim_contents_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::trim_contents_modifier_chosen));
Gtkmm2ext::UI::instance()->set_tip (_trim_contents_combo,
- (string_compose (_("<b>Recommended Setting: %1</b>%2"), Keyboard::primary_modifier_name (), restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == (guint) ArdourKeyboard::trim_contents_modifier ()) {
- _trim_contents_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
+ (string_compose (_("<b>Recommended Setting: %1</b>%2"), Keyboard::primary_modifier_name (), restart_msg)));
l = manage (left_aligned_label (_("Trim contents using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
t->attach (_trim_contents_combo, col + 1, col + 2, row, row + 1, FILL | EXPAND, FILL);
++row;
mod_str = string_compose (X_("%1-%2"), Keyboard::primary_modifier_name (), Keyboard::tertiary_modifier_name ());
Gtkmm2ext::UI::instance()->set_tip (_trim_anchored_combo,
- (string_compose (_("<b>Recommended Setting: %1</b>%2"), mod_str, restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == (guint) ArdourKeyboard::trim_anchored_modifier ()) {
- _trim_anchored_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
+ (string_compose (_("<b>Recommended Setting: %1</b>%2"), mod_str, restart_msg)));
l = manage (left_aligned_label (_("Anchored trim using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
++col;
t->attach (_trim_anchored_combo, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
set_popdown_strings (_trim_jump_combo, dumb);
_trim_jump_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::trim_jump_modifier_chosen));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == (guint) Keyboard::trim_jump_modifier ()) {
- _trim_jump_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
-
l = manage (left_aligned_label (_("Jump after trim using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
++col;
t->attach (_trim_jump_combo, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
set_popdown_strings (_note_size_relative_combo, dumb);
_note_size_relative_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::note_size_relative_modifier_chosen));
Gtkmm2ext::UI::instance()->set_tip (_note_size_relative_combo,
- (string_compose (_("<b>Recommended Setting: %1</b>%2"), Keyboard::tertiary_modifier_name (), restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == (guint) ArdourKeyboard::note_size_relative_modifier ()) {
- _note_size_relative_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
+ (string_compose (_("<b>Recommended Setting: %1</b>%2"), Keyboard::tertiary_modifier_name (), restart_msg))); // XXX 2ndary
l = manage (left_aligned_label (_("Resize notes relatively using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
++col;
t->attach (_note_size_relative_combo, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
mod_str = Keyboard::secondary_modifier_name();
#endif
Gtkmm2ext::UI::instance()->set_tip (_snap_modifier_combo,
- (string_compose (_("<b>Recommended Setting: %1</b>%2"), mod_str, restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == (guint) Keyboard::snap_modifier ()) {
- _snap_modifier_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
+ (string_compose (_("<b>Recommended Setting: %1</b>%2"), mod_str, restart_msg)));
l = manage (left_aligned_label (_("Ignore snap using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
t->attach (_snap_modifier_combo, col + 1, col + 2, row, row + 1, FILL | EXPAND, FILL);
++row;
mod_str = string_compose (X_("%1-%2"), Keyboard::secondary_modifier_name (), Keyboard::level4_modifier_name ());
#endif
Gtkmm2ext::UI::instance()->set_tip (_snap_delta_combo,
- (string_compose (_("<b>Recommended Setting: %1</b>%2"), mod_str, restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == (guint) Keyboard::snap_delta_modifier ()) {
- _snap_delta_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
+ (string_compose (_("<b>Recommended Setting: %1</b>%2"), mod_str, restart_msg)));
l = manage (left_aligned_label (_("Snap relatively using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
t->attach (_snap_delta_combo, col + 1, col + 2, row, row + 1, FILL | EXPAND, FILL);
++row;
_trim_overlap_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::trim_overlap_modifier_chosen));
Gtkmm2ext::UI::instance()->set_tip (_trim_overlap_combo,
- (string_compose (_("<b>Recommended Setting: %1</b>%2"), Keyboard::tertiary_modifier_name (), restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == (guint) ArdourKeyboard::trim_overlap_modifier ()) {
- _trim_overlap_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
+ (string_compose (_("<b>Recommended Setting: %1</b>%2"), Keyboard::tertiary_modifier_name (), restart_msg)));
l = manage (left_aligned_label (_("Resize overlapped regions using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
t->attach (_trim_overlap_combo, col + 1, col + 2, row, row + 1, FILL | EXPAND, FILL);
++row;
set_popdown_strings (_fine_adjust_combo, dumb);
_fine_adjust_combo.signal_changed().connect (sigc::mem_fun(*this, &KeyboardOptions::fine_adjust_modifier_chosen));
- mod_str = string_compose (X_("%1-%2"), Keyboard::primary_modifier_name (), Keyboard::secondary_modifier_name ());
+ mod_str = string_compose (X_("%1-%2"), Keyboard::primary_modifier_name (), Keyboard::secondary_modifier_name ()); // XXX just 2ndary ?!
Gtkmm2ext::UI::instance()->set_tip (_fine_adjust_combo,
- (string_compose (_("<b>Recommended Setting: %1</b>%2"), mod_str, restart_msg)));
- for (int x = 0; modifiers[x].name; ++x) {
- if (modifiers[x].modifier == (guint) ArdourKeyboard::fine_adjust_modifier ()) {
- _fine_adjust_combo.set_active_text (S_(modifiers[x].name));
- break;
- }
- }
+ (string_compose (_("<b>Recommended Setting: %1</b>%2"), mod_str, restart_msg)));
l = manage (left_aligned_label (_("Fine adjust using:")));
l->set_name ("OptionsLabel");
- t->attach (*l, col, col + 1, row, row + 1, FILL | EXPAND, FILL);
+ t->attach (*l, col, col + 1, row, row + 1, FILL, FILL);
t->attach (_fine_adjust_combo, col + 1, col + 2, row, row + 1, FILL | EXPAND, FILL);
+
+ OptionEditorHeading* h = new OptionEditorHeading (_("Reset"));
+ h->add_to_page (this);
+
+ RcActionButton* rb = new RcActionButton (_("Reset to recommended defaults"),
+ sigc::mem_fun (*this, &KeyboardOptions::reset_to_defaults));
+ rb->add_to_page (this);
+
+ set_state_from_config ();
}
void parameter_changed (string const &)
void set_state_from_config ()
{
- /* XXX: these aren't really config options... */
+ _delete_button_adjustment.set_value (Keyboard::delete_button());
+ _insert_note_button_adjustment.set_value (Keyboard::insert_note_button());
+ _edit_button_adjustment.set_value (Keyboard::edit_button());
+
+ for (int x = 0; modifiers[x].name; ++x) {
+ if (modifiers[x].modifier == (guint) ArdourKeyboard::trim_overlap_modifier ()) {
+ _trim_overlap_combo.set_active_text (S_(modifiers[x].name));
+ }
+ if (modifiers[x].modifier == Keyboard::delete_modifier ()) {
+ _delete_modifier_combo.set_active_text (S_(modifiers[x].name));
+ }
+ if (modifiers[x].modifier == Keyboard::edit_modifier ()) {
+ _edit_modifier_combo.set_active_text (S_(modifiers[x].name));
+ }
+ if (modifiers[x].modifier == Keyboard::insert_note_modifier ()) {
+ _insert_note_modifier_combo.set_active_text (S_(modifiers[x].name));
+ }
+ if (modifiers[x].modifier == (guint) Keyboard::CopyModifier) {
+ _copy_modifier_combo.set_active_text (S_(modifiers[x].name));
+ }
+ if (modifiers[x].modifier == (guint) ArdourKeyboard::constraint_modifier ()) {
+ _constraint_modifier_combo.set_active_text (S_(modifiers[x].name));
+ }
+ if (modifiers[x].modifier == (guint) ArdourKeyboard::push_points_modifier ()) {
+ _push_points_combo.set_active_text (S_(modifiers[x].name));
+ }
+ if (modifiers[x].modifier == (guint) ArdourKeyboard::trim_contents_modifier ()) {
+ _trim_contents_combo.set_active_text (S_(modifiers[x].name));
+ }
+ if (modifiers[x].modifier == (guint) ArdourKeyboard::trim_anchored_modifier ()) {
+ _trim_anchored_combo.set_active_text (S_(modifiers[x].name));
+ }
+#if 0
+ if (modifiers[x].modifier == (guint) Keyboard::trim_jump_modifier ()) {
+ _trim_jump_combo.set_active_text (S_(modifiers[x].name));
+ }
+#endif
+ if (modifiers[x].modifier == (guint) ArdourKeyboard::note_size_relative_modifier ()) {
+ _note_size_relative_combo.set_active_text (S_(modifiers[x].name));
+ }
+ if (modifiers[x].modifier == (guint) Keyboard::snap_modifier ()) {
+ _snap_modifier_combo.set_active_text (S_(modifiers[x].name));
+ }
+ if (modifiers[x].modifier == (guint) Keyboard::snap_delta_modifier ()) {
+ _snap_delta_combo.set_active_text (S_(modifiers[x].name));
+ }
+ if (modifiers[x].modifier == (guint) ArdourKeyboard::fine_adjust_modifier ()) {
+ _fine_adjust_combo.set_active_text (S_(modifiers[x].name));
+ }
+ }
}
void add_to_page (OptionEditorPage* p)
Keyboard::set_insert_note_button (_insert_note_button_spin.get_value_as_int());
}
+ void reset_to_defaults ()
+ {
+ /* when clicking*/
+ Keyboard::set_edit_modifier (Keyboard::PrimaryModifier);
+ Keyboard::set_edit_button (3);
+ Keyboard::set_delete_modifier (Keyboard::TertiaryModifier);
+ Keyboard::set_delete_button (3);
+ Keyboard::set_insert_note_modifier (Keyboard::PrimaryModifier);
+ Keyboard::set_insert_note_button (1);
+
+ /* when beginning a drag */
+#ifdef __APPLE__
+ Keyboard::set_copy_modifier (Keyboard::SecondaryModifier);
+#else
+ Keyboard::set_copy_modifier (Keyboard::PrimaryModifier);
+#endif
+
+#ifdef __APPLE__
+ ArdourKeyboard::set_constraint_modifier (Keyboard::PrimaryModifier);
+#else
+ ArdourKeyboard::set_constraint_modifier (Keyboard::TertiaryModifier);
+#endif
+ ArdourKeyboard::set_push_points_modifier (Keyboard::PrimaryModifier | Keyboard::Level4Modifier);
+
+ /* when beginning a trim */
+ ArdourKeyboard::set_trim_contents_modifier (Keyboard::PrimaryModifier);
+ ArdourKeyboard::set_trim_anchored_modifier (Keyboard::PrimaryModifier | Keyboard::TertiaryModifier);
+ ArdourKeyboard::set_note_size_relative_modifier (Keyboard::TertiaryModifier); // XXX better: 2ndary
+
+ /* while dragging */
+#ifdef __APPLE__
+ Keyboard::set_snap_modifier (Keyboard::TertiaryModifier);
+#else
+ Keyboard::set_snap_modifier (Keyboard::SecondaryModifier);
+#endif
+#ifdef __APPLE__
+ Keyboard::set_snap_delta_modifier (Keyboard::Level4Modifier);
+#else
+ Keyboard::set_snap_delta_modifier (Keyboard::SecondaryModifier | Keyboard::Level4Modifier);
+#endif
+
+ /* while trimming */
+ ArdourKeyboard::set_trim_overlap_modifier (Keyboard::TertiaryModifier);
+
+ /* while dragging ctrl points */
+ ArdourKeyboard::set_fine_adjust_modifier (/*Keyboard::PrimaryModifier | */Keyboard::SecondaryModifier); // XXX
+
+ set_state_from_config ();
+ }
+
ComboBoxText _keyboard_layout_selector;
ComboBoxText _edit_modifier_combo;
ComboBoxText _delete_modifier_combo;
if (p == "waveform-clip-level") {
_clip_level_adjustment.set_value (UIConfiguration::instance().get_waveform_clip_level());
}
+ if (p == "show-waveform-clipping") {
+ _clip_level_slider.set_sensitive (UIConfiguration::instance().get_show_waveform_clipping ());
+ }
}
void set_state_from_config ()
{
parameter_changed ("waveform-clip-level");
+ parameter_changed ("show-waveform-clipping");
}
void add_to_page (OptionEditorPage* p) {
* tear_down_gui() hides an deletes the Window if it exists.
*/
ArdourWindow* win = new ArdourWindow (*((Gtk::Window*) _view.get_toplevel()), title.get_string());
- win->set_title ("Control Protocol Options");
+ win->set_title (_("Control Protocol Settings"));
win->add (*box);
box->show ();
win->present ();
RCOptionEditor::RCOptionEditor ()
: OptionEditorContainer (Config, string_compose (_("%1 Preferences"), PROGRAM_NAME))
- , Tabbable (*this, _("Preferences")) /* pack self-as-vbox into tabbable */
+ , Tabbable (*this, _("Preferences")
+#ifdef MIXBUS
+ , false // detached by default (first start, no instant.xml)
+#endif
+ ) /* pack self-as-vbox into tabbable */
, _rc_config (Config)
, _mixer_strip_visibility ("mixer-element-visibility")
{
BoolComboOption* bco;
if (hwcpus > 1) {
- add_option (_("Misc"), new OptionEditorHeading (_("DSP CPU Utilization")));
+ add_option (_("General"), new OptionEditorHeading (_("DSP CPU Utilization")));
ComboOption<int32_t>* procs = new ComboOption<int32_t> (
"processor-usage",
procs->set_note (string_compose (_("This setting will only take effect when %1 is restarted."), PROGRAM_NAME));
- add_option (_("Misc"), procs);
+ add_option (_("General"), procs);
}
- add_option (_("Misc"), new OptionEditorHeading (S_("Options|Undo")));
+ /* Image cache size */
+ add_option (_("General"), new OptionEditorHeading (_("Memory Usage")));
+
+ HSliderOption *sics = new HSliderOption ("waveform-cache-size",
+ _("Waveform image cache size (megabytes)"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_waveform_cache_size),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_waveform_cache_size),
+ 1, 1024, 10 /* 1 MB to 1GB in steps of 10MB */
+ );
+ sics->scale().set_digits (0);
+ Gtkmm2ext::UI::instance()->set_tip (
+ sics->tip_widget(),
+ _("Increasing the cache size uses more memory to store waveform images, which can improve graphical performance."));
+ add_option (_("General"), sics);
+
+ add_option (_("General"), new OptionEditorHeading (_("Engine")));
+
+ add_option (_("General"),
+ new BoolOption (
+ "try-autostart-engine",
+ _("Try to auto-launch audio/midi engine"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_try_autostart_engine),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_try_autostart_engine)
+ ));
+
+ add_option (_("General"), new OptionEditorHeading (_("Automation")));
+
+ add_option (_("General"),
+ new SpinOption<double> (
+ "automation-thinning-factor",
+ _("Thinning factor (larger value => less data)"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_automation_thinning_factor),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_automation_thinning_factor),
+ 0, 1000, 1, 20
+ ));
+
+ add_option (_("General"),
+ new SpinOption<double> (
+ "automation-interval-msecs",
+ _("Automation sampling interval (milliseconds)"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_automation_interval_msecs),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_automation_interval_msecs),
+ 1, 1000, 1, 20
+ ));
+
+ add_option (_("General"), new OptionEditorHeading (_("Tempo")));
+
+ bo = new BoolOption (
+ "allow-non-quarter-pulse",
+ _("Allow non quarter-note pulse"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_allow_non_quarter_pulse),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_allow_non_quarter_pulse)
+ );
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(),
+ string_compose (_("<b>When enabled</b> %1 will allow tempo to be expressed in divisions per minute\n"
+ "<b>When disabled</b> %1 will only allow tempo to be expressed in quarter notes per minute"),
+ PROGRAM_NAME));
+ add_option (_("General"), bo);
+
+ if (!ARDOUR::Profile->get_mixbus()) {
+ add_option (_("General"), new OptionEditorHeading (_("GUI Lock")));
+ /* Lock GUI timeout */
+
+ HSliderOption *slts = new HSliderOption("lock-gui-after-seconds",
+ _("Lock timeout (seconds)"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_lock_gui_after_seconds),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_lock_gui_after_seconds),
+ 0, 1000, 1, 10
+ );
+ slts->scale().set_digits (0);
+ Gtkmm2ext::UI::instance()->set_tip (
+ slts->tip_widget(),
+ _("Lock GUI after this many idle seconds (zero to never lock)"));
+ add_option (_("General"), slts);
+ } // !mixbus
+
+ add_option (_("General/Session"), new OptionEditorHeading (S_("Options|Undo")));
- add_option (_("Misc"), new UndoOptions (_rc_config));
+ add_option (_("General/Session"), new UndoOptions (_rc_config));
- add_option (_("Misc"),
+ add_option (_("General/Session"),
new BoolOption (
"verify-remove-last-capture",
_("Verify removal of last capture"),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_verify_remove_last_capture)
));
- add_option (_("Misc"), new OptionEditorHeading (_("Session Management")));
+ add_option (_("General/Session"), new OptionEditorHeading (_("Session Management")));
- add_option (_("Misc"),
+ add_option (_("General/Session"),
new BoolOption (
"periodic-safety-backups",
_("Make periodic backups of the session file"),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_periodic_safety_backups)
));
- add_option (_("Misc"),
+ add_option (_("General/Session"),
new BoolOption (
"only-copy-imported-files",
_("Always copy imported files"),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_only_copy_imported_files)
));
- add_option (_("Misc"), new DirectoryOption (
+ add_option (_("General/Session"), new DirectoryOption (
X_("default-session-parent-dir"),
_("Default folder for new sessions:"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_default_session_parent_dir),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_default_session_parent_dir)
));
- add_option (_("Misc"),
+ add_option (_("General/Session"),
new SpinOption<uint32_t> (
"max-recent-sessions",
_("Maximum number of recent sessions"),
0, 1000, 1, 20
));
- add_option (_("Misc"), new OptionEditorHeading (_("Automation")));
-
- add_option (_("Misc"),
- new SpinOption<double> (
- "automation-thinning-factor",
- _("Thinning factor (larger value => less data)"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_automation_thinning_factor),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_automation_thinning_factor),
- 0, 1000, 1, 20
- ));
- add_option (_("Misc"),
- new SpinOption<double> (
- "automation-interval-msecs",
- _("Automation sampling interval (milliseconds)"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_automation_interval_msecs),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_automation_interval_msecs),
- 1, 1000, 1, 20
- ));
+#ifdef ENABLE_NLS
- add_option (_("Misc"), new OptionEditorHeading (_("Tempo")));
+ add_option (_("General/Translation"), new OptionEditorHeading (_("Internationalization")));
- BoolOption* tsf;
+ bo = new BoolOption (
+ "enable-translation",
+ _("Use translations"),
+ sigc::ptr_fun (ARDOUR::translations_are_enabled),
+ sigc::ptr_fun (ARDOUR::set_translations_enabled)
+ );
- tsf = new BoolOption (
- "allow-non-quarter-pulse",
- _("Allow non quarter-note pulse"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_allow_non_quarter_pulse),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_allow_non_quarter_pulse)
- );
- Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(),
- string_compose (_("<b>When enabled</b> %1 will allow tempo to be expressed in divisions per minute\n"
- "<b>When disabled</b> %1 will only allow tempo to be expressed in quarter notes per minute"),
- PROGRAM_NAME));
- add_option (_("Misc"), tsf);
+ bo->set_note (string_compose (_("These settings will only take effect after %1 is restarted (if available for your language preferences)."), PROGRAM_NAME));
- /* EDITOR */
+ add_option (_("General/Translation"), bo);
- add_option (_("Editor"), new OptionEditorHeading (_("Editor Settings")));
+ _l10n = new ComboOption<ARDOUR::LocaleMode> (
+ "locale-mode",
+ _("Localization"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_locale_mode),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_locale_mode)
+ );
+
+ _l10n->add (ARDOUR::SET_LC_ALL, _("Set complete locale"));
+ _l10n->add (ARDOUR::SET_LC_MESSAGES, _("Enable only message translation"));
+ _l10n->add (ARDOUR::SET_LC_MESSAGES_AND_LC_NUMERIC, _("Translate messages and format numeric format"));
+ _l10n->set_note (_("This setting is provided for plugin compatibility. e.g. some plugins on some systems expect the decimal point to be a dot."));
+
+ add_option (_("General/Translation"), _l10n);
+ parameter_changed ("enable-translation");
+#endif // ENABLE_NLS
+
+
+ /* EDITOR */
+
+ add_option (_("Editor"), new OptionEditorHeading (_("General")));
add_option (_("Editor"),
new BoolOption (
bo = new BoolOption (
"name-new-markers",
- _("Name new markers"),
+ _("Prompt for new marker names"),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_name_new_markers),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_name_new_markers)
);
Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(), _("If enabled, popup a dialog when a new marker is created to allow its name to be set as it is created."
"\n\nYou can always rename markers by right-clicking on them"));
- add_option (S_("Editor"),
+ add_option (_("Editor"),
new BoolOption (
"draggable-playhead",
_("Allow dragging of playhead"),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_draggable_playhead)
));
-if (!Profile->get_mixbus()) {
- add_option (_("Editor"),
- new BoolOption (
- "show-zoom-tools",
- _("Show zoom toolbar (if torn off)"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_show_zoom_tools),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_zoom_tools)
- ));
+ if (!Profile->get_mixbus()) {
- add_option (_("Editor"),
- new BoolOption (
- "use-mouse-position-as-zoom-focus-on-scroll",
- _("Zoom to mouse position when zooming with scroll wheel"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_use_mouse_position_as_zoom_focus_on_scroll),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_use_mouse_position_as_zoom_focus_on_scroll)
- ));
-} // !mixbus
+ add_option (_("Editor"),
+ new BoolOption (
+ "use-mouse-position-as-zoom-focus-on-scroll",
+ _("Zoom to mouse position when zooming with scroll wheel"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_use_mouse_position_as_zoom_focus_on_scroll),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_use_mouse_position_as_zoom_focus_on_scroll)
+ ));
+ } // !mixbus
add_option (_("Editor"),
new BoolOption (
add_option (_("Editor"), rsas);
+ add_option (_("Editor/Modifiers"), new OptionEditorHeading (_("Keyboard Modifiers")));
+ add_option (_("Editor/Modifiers"), new KeyboardOptions);
+ add_option (_("Editor/Modifiers"), new OptionEditorBlank ());
+
/* MIXER -- SOLO AND MUTE */
add_option (_("Mixer"), new OptionEditorHeading (_("Solo")));
add_option (_("Mixer"), pa);
- add_option (_("Mixer"), new OptionEditorHeading (_("Default track / bus muting options")));
+ add_option (_("Mixer"), new OptionEditorHeading (_("Default Track / Bus Muting Options")));
add_option (_("Mixer"),
new BoolOption (
));
-if (!ARDOUR::Profile->get_mixbus()) {
- add_option (_("Mixer"), new OptionEditorHeading (_("Send Routing")));
- add_option (_("Mixer"),
- new BoolOption (
- "link-send-and-route-panner",
- _("Link panners of Aux and External Sends with main panner by default"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_link_send_and_route_panner),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_link_send_and_route_panner)
- ));
-}
-
-
- /* AUDIO */
-
- add_option (_("Audio"), new OptionEditorHeading (_("Buffering")));
+ if (!ARDOUR::Profile->get_mixbus()) {
+ add_option (_("Mixer"), new OptionEditorHeading (_("Send Routing")));
+ add_option (_("Mixer"),
+ new BoolOption (
+ "link-send-and-route-panner",
+ _("Link panners of Aux and External Sends with main panner by default"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_link_send_and_route_panner),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_link_send_and_route_panner)
+ ));
+ }
- add_option (_("Audio"), new BufferingOptions (_rc_config));
+ /* Signal Flow */
- add_option (_("Audio"), new OptionEditorHeading (_("Monitoring")));
+ add_option (_("Signal Flow"), new OptionEditorHeading (_("Monitoring")));
ComboOption<MonitorModel>* mm = new ComboOption<MonitorModel> (
"monitoring-model",
mm->add (SoftwareMonitoring, string_compose (_("%1"), prog));
mm->add (ExternalMonitoring, _("audio hardware"));
- add_option (_("Audio"), mm);
+ add_option (_("Signal Flow"), mm);
- add_option (_("Audio"),
- new BoolOption (
+ bo = new BoolOption (
"tape-machine-mode",
_("Tape machine mode"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_tape_machine_mode),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_tape_machine_mode)
- ));
+ );
+ add_option (_("Signal Flow"), bo);
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(),
+ string_compose (_("<b>When enabled</b> %1 will not monitor a track's input if the transport is stopped."),
+ PROGRAM_NAME));
- add_option (_("Audio"), new OptionEditorHeading (_("Track and Bus Connections")));
-if (!Profile->get_mixbus()) {
+ if (!Profile->get_mixbus()) {
- add_option (_("Audio"),
- new BoolOption (
- "auto-connect-standard-busses",
- _("Auto-connect master/monitor busses"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_auto_connect_standard_busses),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_auto_connect_standard_busses)
- ));
+ add_option (_("Signal Flow"), new OptionEditorHeading (_("Track and Bus Connections")));
- ComboOption<AutoConnectOption>* iac = new ComboOption<AutoConnectOption> (
- "input-auto-connect",
- _("Connect track inputs"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_input_auto_connect),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_input_auto_connect)
- );
+ add_option (_("Signal Flow"),
+ new BoolOption (
+ "auto-connect-standard-busses",
+ _("Auto-connect master/monitor busses"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_auto_connect_standard_busses),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_auto_connect_standard_busses)
+ ));
- iac->add (AutoConnectPhysical, _("automatically to physical inputs"));
- iac->add (ManualConnect, _("manually"));
+ ComboOption<AutoConnectOption>* iac = new ComboOption<AutoConnectOption> (
+ "input-auto-connect",
+ _("Connect track inputs"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_input_auto_connect),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_input_auto_connect)
+ );
- add_option (_("Audio"), iac);
+ iac->add (AutoConnectPhysical, _("automatically to physical inputs"));
+ iac->add (ManualConnect, _("manually"));
- ComboOption<AutoConnectOption>* oac = new ComboOption<AutoConnectOption> (
- "output-auto-connect",
- _("Connect track and bus outputs"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_output_auto_connect),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_output_auto_connect)
- );
+ add_option (_("Signal Flow"), iac);
- oac->add (AutoConnectPhysical, _("automatically to physical outputs"));
- oac->add (AutoConnectMaster, _("automatically to master bus"));
- oac->add (ManualConnect, _("manually"));
+ ComboOption<AutoConnectOption>* oac = new ComboOption<AutoConnectOption> (
+ "output-auto-connect",
+ _("Connect track and bus outputs"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_output_auto_connect),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_output_auto_connect)
+ );
- add_option (_("Audio"), oac);
+ oac->add (AutoConnectPhysical, _("automatically to physical outputs"));
+ oac->add (AutoConnectMaster, _("automatically to master bus"));
+ oac->add (ManualConnect, _("manually"));
- bo = new BoolOption (
- "strict-io",
- _("Use 'Strict-I/O' for new tracks or Busses"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_strict_io),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_strict_io)
- );
+ add_option (_("Signal Flow"), oac);
- add_option (_("Audio"), bo);
- Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(),
- _("With strict-i/o enabled, Effect Processors will not modify the number of channels on a track. The number of output channels will always match the number of input channels."));
+ bo = new BoolOption (
+ "strict-io",
+ _("Use 'Strict-I/O' for new tracks or Busses"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_strict_io),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_strict_io)
+ );
+
+ add_option (_("Signal Flow"), bo);
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(),
+ _("With strict-i/o enabled, Effect Processors will not modify the number of channels on a track. The number of output channels will always match the number of input channels."));
+
+ } // !mixbus
+
+
+ /* AUDIO */
+
+ add_option (_("Audio"), new OptionEditorHeading (_("Buffering")));
-} // !mixbus
+ add_option (_("Audio"), new BufferingOptions (_rc_config));
add_option (_("Audio"), new OptionEditorHeading (_("Denormals")));
/* MIDI */
- add_option (_("MIDI"), new OptionEditorHeading (_("MIDI Preferences")));
+ add_option (_("MIDI"), new OptionEditorHeading (_("Buffering")));
add_option (_("MIDI"),
new SpinOption<float> (
"", 1.0, 2
));
+ add_option (_("MIDI"), new OptionEditorHeading (_("Session")));
+
add_option (_("MIDI"),
new SpinOption<int32_t> (
"initial-program-change",
-1, 65536, 1, 10
));
- add_option (_("MIDI"),
- new BoolOption (
- "display-first-midi-bank-as-zero",
- _("Display first MIDI bank/program as 0"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_first_midi_bank_is_zero),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_first_midi_bank_is_zero)
- ));
-
- add_option (_("MIDI"),
- new BoolOption (
- "never-display-periodic-midi",
- _("Don't display periodic (MTC, MMC) SysEx messages in MIDI Regions"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_never_display_periodic_midi),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_never_display_periodic_midi)
- ));
+ add_option (_("MIDI"), new OptionEditorHeading (_("Audition")));
add_option (_("MIDI"),
new BoolOption (
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_sound_midi_notes)
));
- add_option (_("MIDI"),
- new BoolOption (
- "midi-feedback",
- _("Send MIDI control feedback"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_midi_feedback),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_midi_feedback)
- ));
-
- add_option (_("MIDI"), new OptionEditorHeading (_("MIDI Audition")));
-
ComboOption<std::string>* audition_synth = new ComboOption<std::string> (
"midi-audition-synth-uri",
_("MIDI Audition Synth (LV2)"),
/* Click */
- add_option (_("Metronome"), new OptionEditorHeading (_("Click")));
+ add_option (_("Metronome"), new OptionEditorHeading (_("Metronome")));
add_option (_("Metronome"), new ClickOptions (_rc_config));
+ /* Meters */
- /* TRANSPORT & Sync */
-
- add_option (_("Transport"), new OptionEditorHeading (S_("Transport Options")));
+ add_option (S_("Preferences|Metering"), new OptionEditorHeading (_("Metering")));
- tsf = new BoolOption (
- "latched-record-enable",
- _("Keep record-enable engaged on stop"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_latched_record_enable),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_latched_record_enable)
- );
- add_option (_("Transport"), tsf);
+ ComboOption<float>* mht = new ComboOption<float> (
+ "meter-hold",
+ _("Peak hold time"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_meter_hold),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_meter_hold)
+ );
- tsf = new BoolOption (
- "loop-is-mode",
- _("Play loop is a transport mode"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_loop_is_mode),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_loop_is_mode)
- );
- Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(),
- (_("<b>When enabled</b> the loop button does not start playback but forces playback to always play the loop\n\n"
- "<b>When disabled</b> the loop button starts playing the loop, but stop then cancels loop playback")));
- add_option (_("Transport"), tsf);
+ mht->add (MeterHoldOff, _("off"));
+ mht->add (MeterHoldShort, _("short"));
+ mht->add (MeterHoldMedium, _("medium"));
+ mht->add (MeterHoldLong, _("long"));
- tsf = new BoolOption (
- "stop-recording-on-xrun",
- _("Stop recording when an xrun occurs"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_stop_recording_on_xrun),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_stop_recording_on_xrun)
- );
- Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(),
- string_compose (_("<b>When enabled</b> %1 will stop recording if an over- or underrun is detected by the audio engine"),
- PROGRAM_NAME));
- add_option (_("Transport"), tsf);
+ add_option (S_("Preferences|Metering"), mht);
- tsf = new BoolOption (
- "create-xrun-marker",
- _("Create markers where xruns occur"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_create_xrun_marker),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_create_xrun_marker)
- );
- // Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _(""));
- add_option (_("Transport"), tsf);
+ ComboOption<float>* mfo = new ComboOption<float> (
+ "meter-falloff",
+ _("DPM fall-off"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_falloff),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_falloff)
+ );
- tsf = new BoolOption (
- "stop-at-session-end",
- _("Stop at the end of the session"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_stop_at_session_end),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_stop_at_session_end)
- );
- Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(),
- string_compose (_("<b>When enabled</b> if %1 is <b>not recording</b>, it will stop the transport "
- "when it reaches the current session end marker\n\n"
- "<b>When disabled</b> %1 will continue to roll past the session end marker at all times"),
- PROGRAM_NAME));
- add_option (_("Transport"), tsf);
+ mfo->add (METER_FALLOFF_OFF, _("off"));
+ mfo->add (METER_FALLOFF_SLOWEST, _("slowest [6.6dB/sec]"));
+ mfo->add (METER_FALLOFF_SLOW, _("slow [8.6dB/sec] (BBC PPM, EBU PPM)"));
+ mfo->add (METER_FALLOFF_SLOWISH, _("moderate [12.0dB/sec] (DIN)"));
+ mfo->add (METER_FALLOFF_MODERATE, _("medium [13.3dB/sec] (EBU Digi PPM, IRT Digi PPM)"));
+ mfo->add (METER_FALLOFF_MEDIUM, _("fast [20dB/sec]"));
+ mfo->add (METER_FALLOFF_FAST, _("very fast [32dB/sec]"));
- tsf = new BoolOption (
- "seamless-loop",
- _("Do seamless looping (not possible when slaved to MTC, LTC etc)"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_seamless_loop),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_seamless_loop)
- );
- Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(),
- string_compose (_("<b>When enabled</b> this will loop by reading ahead and wrapping around at the loop point, "
- "preventing any need to do a transport locate at the end of the loop\n\n"
- "<b>When disabled</b> looping is done by locating back to the start of the loop when %1 reaches the end "
- "which will often cause a small click or delay"), PROGRAM_NAME));
- add_option (_("Transport"), tsf);
+ add_option (S_("Preferences|Metering"), mfo);
- tsf = new BoolOption (
- "disable-disarm-during-roll",
- _("Disable per-track record disarm while rolling"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_disable_disarm_during_roll),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_disable_disarm_during_roll)
- );
- Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _("<b>When enabled</b> this will prevent you from accidentally stopping specific tracks recording during a take"));
- add_option (_("Transport"), tsf);
+ ComboOption<MeterLineUp>* mlu = new ComboOption<MeterLineUp> (
+ "meter-line-up-level",
+ _("Meter line-up level; 0dBu"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_meter_line_up_level),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_meter_line_up_level)
+ );
- tsf = new BoolOption (
- "quieten_at_speed",
- _("12dB gain reduction during fast-forward and fast-rewind"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_quieten_at_speed),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_quieten_at_speed)
- );
- Gtkmm2ext::UI::instance()->set_tip (tsf->tip_widget(), _("This will reduce the unpleasant increase in perceived volume "
- "that occurs when fast-forwarding or rewinding through some kinds of audio"));
- add_option (_("Transport"), tsf);
+ mlu->add (MeteringLineUp24, _("-24dBFS (SMPTE US: 4dBu = -20dBFS)"));
+ mlu->add (MeteringLineUp20, _("-20dBFS (SMPTE RP.0155)"));
+ mlu->add (MeteringLineUp18, _("-18dBFS (EBU, BBC)"));
+ mlu->add (MeteringLineUp15, _("-15dBFS (DIN)"));
- ComboOption<float>* psc = new ComboOption<float> (
- "preroll-seconds",
- _("Preroll"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_preroll_seconds),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_preroll_seconds)
- );
- Gtkmm2ext::UI::instance()->set_tip (psc->tip_widget(),
- (_("The amount of preroll (in seconds) to apply when <b>Play with Preroll</b> is initiated.\n\n"
- "If <b>Follow Edits</b> is enabled, the preroll is applied to the playhead position when a region is selected or trimmed.")));
- psc->add (0.0, _("0 (no pre-roll)"));
- psc->add (0.1, _("0.1 second"));
- psc->add (0.25, _("0.25 second"));
- psc->add (0.5, _("0.5 second"));
- psc->add (1.0, _("1.0 second"));
- psc->add (2.0, _("2.0 seconds"));
- add_option (_("Transport"), psc);
+ Gtkmm2ext::UI::instance()->set_tip (mlu->tip_widget(), _("Configure meter-marks and color-knee point for dBFS scale DPM, set reference level for IEC1/Nordic, IEC2 PPM and VU meter."));
- add_option (_("Sync"), new OptionEditorHeading (S_("Synchronization and Slave Options")));
+ add_option (S_("Preferences|Metering"), mlu);
- _sync_source = new ComboOption<SyncSource> (
- "sync-source",
- _("External timecode source"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_sync_source),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_sync_source)
+ ComboOption<MeterLineUp>* mld = new ComboOption<MeterLineUp> (
+ "meter-line-up-din",
+ _("IEC1/DIN Meter line-up level; 0dBu"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_meter_line_up_din),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_meter_line_up_din)
);
- add_option (_("Sync"), _sync_source);
+ mld->add (MeteringLineUp24, _("-24dBFS (SMPTE US: 4dBu = -20dBFS)"));
+ mld->add (MeteringLineUp20, _("-20dBFS (SMPTE RP.0155)"));
+ mld->add (MeteringLineUp18, _("-18dBFS (EBU, BBC)"));
+ mld->add (MeteringLineUp15, _("-15dBFS (DIN)"));
- _sync_framerate = new BoolOption (
- "timecode-sync-frame-rate",
- _("Match session video frame rate to external timecode"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_timecode_sync_frame_rate),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_timecode_sync_frame_rate)
- );
- Gtkmm2ext::UI::instance()->set_tip
- (_sync_framerate->tip_widget(),
- string_compose (_("This option controls the value of the video frame rate <i>while chasing</i> an external timecode source.\n\n"
- "<b>When enabled</b> the session video frame rate will be changed to match that of the selected external timecode source.\n\n"
- "<b>When disabled</b> the session video frame rate will not be changed to match that of the selected external timecode source."
- "Instead the frame rate indication in the main clock will flash red and %1 will convert between the external "
- "timecode standard and the session standard."), PROGRAM_NAME));
+ Gtkmm2ext::UI::instance()->set_tip (mld->tip_widget(), _("Reference level for IEC1/DIN meter."));
- add_option (_("Sync"), _sync_framerate);
+ add_option (S_("Preferences|Metering"), mld);
- _sync_genlock = new BoolOption (
- "timecode-source-is-synced",
- _("Sync-lock timecode to clock (disable drift compensation)"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_timecode_source_is_synced),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_timecode_source_is_synced)
+ ComboOption<VUMeterStandard>* mvu = new ComboOption<VUMeterStandard> (
+ "meter-vu-standard",
+ _("VU Meter standard"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_meter_vu_standard),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_meter_vu_standard)
);
- Gtkmm2ext::UI::instance()->set_tip
- (_sync_genlock->tip_widget(),
- string_compose (_("<b>When enabled</b> %1 will never varispeed when slaved to external timecode. "
- "Sync Lock indicates that the selected external timecode source shares clock-sync "
- "(Black & Burst, Wordclock, etc) with the audio interface. "
- "This option disables drift compensation. The transport speed is fixed at 1.0. "
- "Vari-speed LTC will be ignored and cause drift."
- "\n\n"
- "<b>When disabled</b> %1 will compensate for potential drift, regardless if the "
- "timecode sources shares clock sync."
- ), PROGRAM_NAME));
+ mvu->add (MeteringVUfrench, _("0VU = -2dBu (France)"));
+ mvu->add (MeteringVUamerican, _("0VU = 0dBu (North America, Australia)"));
+ mvu->add (MeteringVUstandard, _("0VU = +4dBu (standard)"));
+ mvu->add (MeteringVUeight, _("0VU = +8dBu"));
- add_option (_("Sync"), _sync_genlock);
+ add_option (S_("Preferences|Metering"), mvu);
- _sync_source_2997 = new BoolOption (
- "timecode-source-2997",
- _("Lock to 29.9700 fps instead of 30000/1001"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_timecode_source_2997),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_timecode_source_2997)
+ ComboOption<MeterType>* mtm = new ComboOption<MeterType> (
+ "meter-type-master",
+ _("Default Meter Type for Master Bus"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_type_master),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_type_master)
+ );
+ mtm->add (MeterPeak, ArdourMeter::meter_type_string(MeterPeak));
+ mtm->add (MeterK20, ArdourMeter::meter_type_string(MeterK20));
+ mtm->add (MeterK14, ArdourMeter::meter_type_string(MeterK14));
+ mtm->add (MeterK12, ArdourMeter::meter_type_string(MeterK12));
+ mtm->add (MeterIEC1DIN, ArdourMeter::meter_type_string(MeterIEC1DIN));
+ mtm->add (MeterIEC1NOR, ArdourMeter::meter_type_string(MeterIEC1NOR));
+ mtm->add (MeterIEC2BBC, ArdourMeter::meter_type_string(MeterIEC2BBC));
+ mtm->add (MeterIEC2EBU, ArdourMeter::meter_type_string(MeterIEC2EBU));
+
+ add_option (S_("Preferences|Metering"), mtm);
+
+
+ ComboOption<MeterType>* mtb = new ComboOption<MeterType> (
+ "meter-type-bus",
+ _("Default Meter Type for Busses"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_type_bus),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_type_bus)
+ );
+ mtb->add (MeterPeak, ArdourMeter::meter_type_string(MeterPeak));
+ mtb->add (MeterK20, ArdourMeter::meter_type_string(MeterK20));
+ mtb->add (MeterK14, ArdourMeter::meter_type_string(MeterK14));
+ mtb->add (MeterK12, ArdourMeter::meter_type_string(MeterK12));
+ mtb->add (MeterIEC1DIN, ArdourMeter::meter_type_string(MeterIEC1DIN));
+ mtb->add (MeterIEC1NOR, ArdourMeter::meter_type_string(MeterIEC1NOR));
+ mtb->add (MeterIEC2BBC, ArdourMeter::meter_type_string(MeterIEC2BBC));
+ mtb->add (MeterIEC2EBU, ArdourMeter::meter_type_string(MeterIEC2EBU));
+
+ add_option (S_("Preferences|Metering"), mtb);
+
+ ComboOption<MeterType>* mtt = new ComboOption<MeterType> (
+ "meter-type-track",
+ _("Default Meter Type for Tracks"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_type_track),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_type_track)
+ );
+ mtt->add (MeterPeak, ArdourMeter::meter_type_string(MeterPeak));
+ mtt->add (MeterPeak0dB, ArdourMeter::meter_type_string(MeterPeak0dB));
+
+ add_option (S_("Preferences|Metering"), mtt);
+
+ HSliderOption *mpks = new HSliderOption("meter-peak",
+ _("Peak threshold [dBFS]"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_meter_peak),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_meter_peak),
+ -10, 0, .1, .1
+ );
+
+ Gtkmm2ext::UI::instance()->set_tip (
+ mpks->tip_widget(),
+ _("Specify the audio signal level in dBFS at and above which the meter-peak indicator will flash red."));
+
+ add_option (S_("Preferences|Metering"), mpks);
+
+ add_option (S_("Preferences|Metering"), new OptionEditorHeading (_("Post Export Analysis")));
+
+ add_option (S_("Preferences|Metering"),
+ new BoolOption (
+ "save-export-analysis-image",
+ _("Save loudness analysis as image file"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_save_export_analysis_image),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_save_export_analysis_image)
+ ));
+
+ /* TRANSPORT & Sync */
+
+ add_option (_("Transport"), new OptionEditorHeading (_("General")));
+
+ bo = new BoolOption (
+ "stop-at-session-end",
+ _("Stop at the end of the session"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_stop_at_session_end),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_stop_at_session_end)
+ );
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(),
+ string_compose (_("<b>When enabled</b> if %1 is <b>not recording</b>, it will stop the transport "
+ "when it reaches the current session end marker\n\n"
+ "<b>When disabled</b> %1 will continue to roll past the session end marker at all times"),
+ PROGRAM_NAME));
+ add_option (_("Transport"), bo);
+
+ bo = new BoolOption (
+ "latched-record-enable",
+ _("Keep record-enable engaged on stop"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_latched_record_enable),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_latched_record_enable)
+ );
+ add_option (_("Transport"), bo);
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(),
+ _("<b>When enabled</b> master record will remain engaged when the transport transitions to stop.\n<b>When disabled</b> master record will be disabled when the transport transitions to stop."));
+
+ bo = new BoolOption (
+ "disable-disarm-during-roll",
+ _("Disable per-track record disarm while rolling"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_disable_disarm_during_roll),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_disable_disarm_during_roll)
+ );
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(), _("<b>When enabled</b> this will prevent you from accidentally stopping specific tracks recording during a take."));
+ add_option (_("Transport"), bo);
+
+ bo = new BoolOption (
+ "quieten_at_speed",
+ _("12dB gain reduction during fast-forward and fast-rewind"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_quieten_at_speed),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_quieten_at_speed)
+ );
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(),
+ _("<b>When enabled</b> rhis will reduce the unpleasant increase in perceived volume "
+ "that occurs when fast-forwarding or rewinding through some kinds of audio"));
+ add_option (_("Transport"), bo);
+
+ ComboOption<float>* psc = new ComboOption<float> (
+ "preroll-seconds",
+ _("Preroll"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_preroll_seconds),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_preroll_seconds)
+ );
+ Gtkmm2ext::UI::instance()->set_tip (psc->tip_widget(),
+ (_("The amount of preroll to apply when <b>Play with Preroll</b> or <b>Record with Preroll</b>is initiated.\n\n"
+ "If <b>Follow Edits</b> is enabled, the preroll is applied to the playhead position when a region is selected or trimmed.")));
+ psc->add (-4.0, _("4 Bars"));
+ psc->add (-2.0, _("2 Bars"));
+ psc->add (-1.0, _("1 Bar"));
+ psc->add (0.0, _("0 (no pre-roll)"));
+ psc->add (0.1, _("0.1 second"));
+ psc->add (0.25, _("0.25 second"));
+ psc->add (0.5, _("0.5 second"));
+ psc->add (1.0, _("1.0 second"));
+ psc->add (2.0, _("2.0 seconds"));
+ add_option (_("Transport"), psc);
+
+
+ add_option (_("Transport"), new OptionEditorHeading (_("Looping")));
+
+ bo = new BoolOption (
+ "loop-is-mode",
+ _("Play loop is a transport mode"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_loop_is_mode),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_loop_is_mode)
+ );
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(),
+ (_("<b>When enabled</b> the loop button does not start playback but forces playback to always play the loop\n\n"
+ "<b>When disabled</b> the loop button starts playing the loop, but stop then cancels loop playback")));
+ add_option (_("Transport"), bo);
+
+ bo = new BoolOption (
+ "seamless-loop",
+ _("Do seamless looping (not possible when slaved to MTC, LTC etc)"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_seamless_loop),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_seamless_loop)
+ );
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(),
+ string_compose (_("<b>When enabled</b> this will loop by reading ahead and wrapping around at the loop point, "
+ "preventing any need to do a transport locate at the end of the loop\n\n"
+ "<b>When disabled</b> looping is done by locating back to the start of the loop when %1 reaches the end "
+ "which will often cause a small click or delay"), PROGRAM_NAME));
+ add_option (_("Transport"), bo);
+
+ add_option (_("Transport"), new OptionEditorHeading (_("Dropout (xrun) Handling")));
+ bo = new BoolOption (
+ "stop-recording-on-xrun",
+ _("Stop recording when an xrun occurs"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_stop_recording_on_xrun),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_stop_recording_on_xrun)
+ );
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget(),
+ string_compose (_("<b>When enabled</b> %1 will stop recording if an over- or underrun is detected by the audio engine"),
+ PROGRAM_NAME));
+ add_option (_("Transport"), bo);
+
+ bo = new BoolOption (
+ "create-xrun-marker",
+ _("Create markers where xruns occur"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_create_xrun_marker),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_create_xrun_marker)
+ );
+ add_option (_("Transport"), bo);
+
+
+ /* SYNC */
+
+ add_option (_("Sync"), new OptionEditorHeading (_("External Syncronization")));
+
+ _sync_source = new ComboOption<SyncSource> (
+ "sync-source",
+ _("External timecode source"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_sync_source),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_sync_source)
+ );
+
+ add_option (_("Sync"), _sync_source);
+
+ _sync_framerate = new BoolOption (
+ "timecode-sync-frame-rate",
+ _("Match session video frame rate to external timecode"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_timecode_sync_frame_rate),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_timecode_sync_frame_rate)
+ );
+ Gtkmm2ext::UI::instance()->set_tip
+ (_sync_framerate->tip_widget(),
+ string_compose (_("This option controls the value of the video frame rate <i>while chasing</i> an external timecode source.\n\n"
+ "<b>When enabled</b> the session video frame rate will be changed to match that of the selected external timecode source.\n\n"
+ "<b>When disabled</b> the session video frame rate will not be changed to match that of the selected external timecode source."
+ "Instead the frame rate indication in the main clock will flash red and %1 will convert between the external "
+ "timecode standard and the session standard."), PROGRAM_NAME));
+
+ add_option (_("Sync"), _sync_framerate);
+
+ _sync_genlock = new BoolOption (
+ "timecode-source-is-synced",
+ _("Sync-lock timecode to clock (disable drift compensation)"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_timecode_source_is_synced),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_timecode_source_is_synced)
+ );
+ Gtkmm2ext::UI::instance()->set_tip
+ (_sync_genlock->tip_widget(),
+ string_compose (_("<b>When enabled</b> %1 will never varispeed when slaved to external timecode. "
+ "Sync Lock indicates that the selected external timecode source shares clock-sync "
+ "(Black & Burst, Wordclock, etc) with the audio interface. "
+ "This option disables drift compensation. The transport speed is fixed at 1.0. "
+ "Vari-speed LTC will be ignored and cause drift."
+ "\n\n"
+ "<b>When disabled</b> %1 will compensate for potential drift, regardless if the "
+ "timecode sources shares clock sync."
+ ), PROGRAM_NAME));
+
+
+ add_option (_("Sync"), _sync_genlock);
+
+ _sync_source_2997 = new BoolOption (
+ "timecode-source-2997",
+ _("Lock to 29.9700 fps instead of 30000/1001"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_timecode_source_2997),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_timecode_source_2997)
);
Gtkmm2ext::UI::instance()->set_tip
(_sync_source_2997->tip_widget(),
add_option (_("Sync"), _sync_source_2997);
- add_option (_("Sync/LTC"), new OptionEditorHeading (S_("LTC Reader")));
+ add_option (_("Sync/LTC"), new OptionEditorHeading (_("Linear Timecode (LTC) Reader")));
_ltc_port = new ComboStringOption (
"ltc-source-port",
add_option (_("Sync/LTC"), _ltc_port);
- add_option (_("Sync/LTC"), new OptionEditorHeading (S_("LTC Generator")));
+ add_option (_("Sync/LTC"), new OptionEditorHeading (_("Linear Timecode (LTC) Generator")));
add_option (_("Sync/LTC"),
new BoolOption (
string_compose (_("<b>When enabled</b> %1 will continue to send LTC information even when the transport (playhead) is not moving"), PROGRAM_NAME));
add_option (_("Sync/LTC"), _ltc_send_continuously);
- _ltc_volume_slider = new HSliderOption("ltcvol", _("LTC generator level"),
+ _ltc_volume_slider = new HSliderOption("ltcvol", _("LTC generator level [dBFS]"),
sigc::mem_fun (*_rc_config, &RCConfiguration::get_ltc_output_volume),
sigc::mem_fun (*_rc_config, &RCConfiguration::set_ltc_output_volume),
-50, 0, .5, 5,
/* INTERFACE */
#if (defined OPTIONAL_CAIRO_IMAGE_SURFACE || defined CAIRO_SUPPORTS_FORCE_BUGGY_GRADIENTS_ENVIRONMENT_VARIABLE)
- add_option (S_("Preferences|GUI"), new OptionEditorHeading (_("Graphics Acceleration")));
+ add_option (_("Appearance"), new OptionEditorHeading (_("Graphics Acceleration")));
#endif
#ifdef OPTIONAL_CAIRO_IMAGE_SURFACE
Gtkmm2ext::UI::instance()->set_tip (bgc->tip_widget(), string_compose (
_("Render large parts of the application user-interface in software, instead of using 2D-graphics acceleration.\nThis requires restarting %1 before having an effect"), PROGRAM_NAME));
- add_option (S_("Preferences|GUI"), bgc);
+ add_option (_("Appearance"), bgc);
#endif
#ifdef CAIRO_SUPPORTS_FORCE_BUGGY_GRADIENTS_ENVIRONMENT_VARIABLE
);
Gtkmm2ext::UI::instance()->set_tip (bgo->tip_widget(), string_compose (_("Disables hardware gradient rendering on buggy video drivers (\"buggy gradients patch\").\nThis requires restarting %1 before having an effect"), PROGRAM_NAME));
- add_option (S_("Preferences|GUI"), bgo);
+ add_option (_("Appearance"), bgo);
#endif
- add_option (S_("Preferences|GUI"), new OptionEditorHeading (_("Graphical User Interface")));
+ add_option (_("Appearance"), new OptionEditorHeading (_("Graphical User Interface")));
- add_option (S_("Preferences|GUI"),
+ add_option (_("Appearance"),
new BoolOption (
"widget-prelight",
_("Highlight widgets on mouseover"),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_widget_prelight)
));
- add_option (S_("Preferences|GUI"),
+ add_option (_("Appearance"),
new BoolOption (
"use-tooltips",
_("Show tooltips if mouse hovers over a control"),
_("<b>When enabled</b> clock displays are updated every Timecode Frame (fps).\n\n"
"<b>When disabled</b> clock displays are updated only every 100ms."
));
- add_option (S_("Preferences|GUI"), bo);
+ add_option (_("Appearance"), bo);
- add_option (S_("Preferences|GUI"),
+ add_option (_("Appearance"),
new BoolOption (
"blink-rec-arm",
_("Blink Rec-Arm buttons"),
#ifndef __APPLE__
/* font scaling does nothing with GDK/Quartz */
- add_option (S_("Preferences|GUI"), new FontScalingOptions ());
+ add_option (_("Appearance"), new FontScalingOptions ());
#endif
-
- /* Image cache size */
-
- HSliderOption *sics = new HSliderOption ("waveform-cache-size",
- _("Waveform image cache size (megabytes)"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_waveform_cache_size),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_waveform_cache_size),
- 1, 1024, 10 /* 1 MB to 1GB in steps of 10MB */
- );
- sics->scale().set_digits (0);
- Gtkmm2ext::UI::instance()->set_tip (
- sics->tip_widget(),
- _("Increasing the cache size uses more memory to store waveform images, which can improve graphical performance."));
- add_option (S_("Preferences|GUI"), sics);
-
-if (!ARDOUR::Profile->get_mixbus()) {
- /* Lock GUI timeout */
-
- HSliderOption *slts = new HSliderOption("lock-gui-after-seconds",
- _("Lock timeout (seconds)"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_lock_gui_after_seconds),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_lock_gui_after_seconds),
- 0, 1000, 1, 10
- );
- slts->scale().set_digits (0);
- Gtkmm2ext::UI::instance()->set_tip (
- slts->tip_widget(),
- _("Lock GUI after this many idle seconds (zero to never lock)"));
- add_option (S_("Preferences|GUI"), slts);
-} // !mixbus
-
- add_option (_("GUI/Editor"), new OptionEditorHeading (_("Editor UI Options")));
- add_option (_("GUI/Editor"),
+ add_option (_("Appearance/Editor"), new OptionEditorHeading (_("General")));
+ add_option (_("Appearance/Editor"),
new BoolOption (
"show-name-highlight",
_("Use name highlight bars in region displays (requires a restart)"),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_name_highlight)
));
- add_option (_("GUI/Editor"),
+ add_option (_("Appearance/Editor"),
new BoolOption (
"color-regions-using-track-color",
_("Region color follows track color"),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_color_regions_using_track_color)
));
- add_option (_("GUI/Editor"),
- new BoolOption (
- "show-waveform-clipping",
- _("Show waveform clipping"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_show_waveform_clipping),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_waveform_clipping)
- ));
-
-
- add_option (_("GUI/Editor"), new OptionEditorHeading (_("Waveforms")));
+ add_option (_("Appearance/Editor"), new OptionEditorHeading (_("Waveforms")));
-if (!Profile->get_mixbus()) {
- add_option (_("GUI/Editor"),
- new BoolOption (
- "show-waveforms",
- _("Show waveforms in regions"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_show_waveforms),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_waveforms)
- ));
-} // !mixbus
+ if (!Profile->get_mixbus()) {
+ add_option (_("Appearance/Editor"),
+ new BoolOption (
+ "show-waveforms",
+ _("Show waveforms in regions"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_show_waveforms),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_waveforms)
+ ));
+ } // !mixbus
- add_option (_("GUI/Editor"),
+ add_option (_("Appearance/Editor"),
new BoolOption (
"show-waveforms-while-recording",
_("Show waveforms while recording"),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_waveforms_while_recording)
));
+ add_option (_("Appearance/Editor"),
+ new BoolOption (
+ "show-waveform-clipping",
+ _("Show waveform clipping"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_show_waveform_clipping),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_waveform_clipping)
+ ));
+
+ add_option (_("Appearance/Editor"), new ClipLevelOptions ());
+
ComboOption<WaveformScale>* wfs = new ComboOption<WaveformScale> (
"waveform-scale",
_("Waveform scale"),
wfs->add (Linear, _("linear"));
wfs->add (Logarithmic, _("logarithmic"));
- add_option (_("GUI/Editor"), wfs);
+ add_option (_("Appearance/Editor"), wfs);
ComboOption<WaveformShape>* wfsh = new ComboOption<WaveformShape> (
"waveform-shape",
wfsh->add (Traditional, _("traditional"));
wfsh->add (Rectified, _("rectified"));
- add_option (_("GUI/Editor"), wfsh);
+ add_option (_("Appearance/Editor"), wfsh);
+
+ add_option (_("Appearance/Editor"), new OptionEditorHeading (_("Editor Meters")));
+
+ add_option (_("Appearance/Editor"),
+ new BoolOption (
+ "show-track-meters",
+ _("Show meters in track headers"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_show_track_meters),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_track_meters)
+ ));
+
+ add_option (_("Appearance/Editor"),
+ new BoolOption (
+ "editor-stereo-only-meters",
+ _("Limit track header meters to stereo"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_editor_stereo_only_meters),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_editor_stereo_only_meters)
+ ));
+
+ add_option (_("Appearance/Editor"), new OptionEditorHeading (_("MIDI Regions")));
- add_option (_("GUI/Editor"), new ClipLevelOptions ());
+ add_option (_("Appearance/Editor"),
+ new BoolOption (
+ "display-first-midi-bank-as-zero",
+ _("Display first MIDI bank/program as 0"),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::get_first_midi_bank_is_zero),
+ sigc::mem_fun (*_rc_config, &RCConfiguration::set_first_midi_bank_is_zero)
+ ));
+ add_option (_("Appearance/Editor"),
+ new BoolOption (
+ "never-display-periodic-midi",
+ _("Don't display periodic (MTC, MMC) SysEx messages in MIDI Regions"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_never_display_periodic_midi),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_never_display_periodic_midi)
+ ));
- add_option (_("GUI/Editor"), new OptionEditorBlank ());
+ add_option (_("Appearance/Editor"), new OptionEditorBlank ());
/* The names of these controls must be the same as those given in MixerStrip
for the actual widgets being controlled.
_mixer_strip_visibility.add (0, X_("Comments"), _("Comments"));
_mixer_strip_visibility.add (0, X_("VCA"), _("VCA Assigns"));
- add_option (_("GUI/Mixer"),
+ add_option (_("Appearance/Mixer"),
new VisibilityOption (
_("Mixer Strip"),
&_mixer_strip_visibility,
)
);
- add_option (_("GUI/Mixer"),
+ add_option (_("Appearance/Mixer"),
new BoolOption (
"default-narrow_ms",
- _("Use narrow strips in the mixer by default"),
+ _("Use narrow strips in the mixer for new strips by default"),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_default_narrow_ms),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_default_narrow_ms)
));
- add_option (_("GUI/Mixer"), new OptionEditorBlank ());
-
-#ifdef ENABLE_NLS
- OptionEditorHeading* i18n_head = new OptionEditorHeading (_("Internationalization"));
-
- add_option (_("GUI/Translation"), i18n_head);
-
- bo = new BoolOption (
- "enable-translation",
- _("Use translations"),
- sigc::ptr_fun (ARDOUR::translations_are_enabled),
- sigc::ptr_fun (ARDOUR::set_translations_enabled)
- );
-
- bo->set_note (string_compose (_("These settings will only take effect after %1 is restarted (if available for your language preferences)."), PROGRAM_NAME));
-
- add_option (_("GUI/Translation"), bo);
-
- _l10n = new ComboOption<ARDOUR::LocaleMode> (
- "locale-mode",
- _("Localization"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_locale_mode),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_locale_mode)
- );
-
- _l10n->add (ARDOUR::SET_LC_ALL, _("Set complete locale"));
- _l10n->add (ARDOUR::SET_LC_MESSAGES, _("Enable only message translation"));
- _l10n->add (ARDOUR::SET_LC_MESSAGES_AND_LC_NUMERIC, _("Translate messages and format numeric format"));
- _l10n->set_note (_("This setting is provided for plugin compatibility. e.g. some plugins on some systems expect the decimal point to be a dot."));
+ add_option (_("Appearance/Mixer"), new OptionEditorBlank ());
- add_option (_("GUI/Translation"), _l10n);
- parameter_changed ("enable-translation");
-#endif // ENABLE_NLS
+ add_option (_("Appearance/Toolbar"), new OptionEditorHeading (_("Main Transport Toolbar Items")));
- add_option (_("GUI/Keyboard"), new OptionEditorHeading (_("Keyboard")));
- add_option (_("GUI/Keyboard"), new KeyboardOptions);
+ add_option (_("Appearance/Toolbar"),
+ new BoolOption (
+ "show-toolbar-recpunch",
+ _("Display Record/Punch Options"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_show_toolbar_recpunch),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_toolbar_recpunch)
+ ));
- add_option (_("GUI/Toolbar"), new OptionEditorHeading (_("Main Transport Toolbar Items")));
+ add_option (_("Appearance/Toolbar"),
+ new BoolOption (
+ "show-toolbar-monitoring",
+ _("Display Monitor Options"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_show_toolbar_monitoring),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_toolbar_monitoring)
+ ));
- add_option (_("GUI/Toolbar"),
+ add_option (_("Appearance/Toolbar"),
new BoolOption (
"show-toolbar-selclock",
_("Display Selection Clock"),
));
if (!ARDOUR::Profile->get_small_screen()) {
- add_option (_("GUI/Toolbar"),
+ add_option (_("Appearance/Toolbar"),
new BoolOption (
"show-secondary-clock",
_("Display Secondary Clock"),
));
}
- add_option (_("GUI/Toolbar"),
+ add_option (_("Appearance/Toolbar"),
new BoolOption (
"show-mini-timeline",
_("Display Navigation Timeline"),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_mini_timeline)
));
- add_option (_("GUI/Toolbar"),
+ add_option (_("Appearance/Toolbar"),
new BoolOption (
"show-editor-meter",
_("Display Master Level Meter"),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_editor_meter)
));
- add_option (_("GUI/Toolbar"),
+ add_option (_("Appearance/Toolbar"),
new ColumVisibilityOption (
"action-table-columns", _("Lua Action Script Button Visibility"), 4,
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_action_table_columns),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_action_table_columns)
)
);
- add_option (_("GUI/Toolbar"), new OptionEditorBlank ());
+ add_option (_("Appearance/Toolbar"), new OptionEditorBlank ());
- add_option (_("GUI/Quirks"), new OptionEditorHeading (_("Various Workarounds for Windowing Systems")));
- add_option (_("GUI/Quirks"),
- new BoolOption (
+
+ OptionEditorHeading* quirks_head = new OptionEditorHeading (_("Various Workarounds for Windowing Systems"));
+
+ quirks_head->set_note (string_compose (_("Rules for closing, minimizing, maximizing, and stay-on-top can vary\
+with each version of your OS, and the preferences that you've set in your OS.\n\n\
+You can adjust the options, below, to change how %1's windows and dialogs behave.\n\n\
+These settings will only take effect after %1 is restarted.\n\
+ "), PROGRAM_NAME));
+
+ /* and now the theme manager */
+
+ add_option (_("Appearance/Theme"), new OptionEditorHeading (_("Theme")));
+
+ add_option (_("Appearance/Theme"), new BoolOption (
+ "flat-buttons",
+ _("Draw \"flat\" buttons"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_flat_buttons),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_flat_buttons)
+ ));
+
+ add_option (_("Appearance/Theme"), new BoolOption (
+ "meter-style-led",
+ _("LED meter style"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_meter_style_led),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_meter_style_led)
+ ));
+
+
+ HSliderOption *gui_hs = new HSliderOption(
+ "timeline-item-gradient-depth",
+ _("Waveforms color gradient depth"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_waveform_gradient_depth),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_waveform_gradient_depth),
+ 0, 1.0, 0.05
+ );
+ gui_hs->scale().set_update_policy (Gtk::UPDATE_DELAYED);
+ add_option (_("Appearance/Theme"), gui_hs);
+
+ gui_hs = new HSliderOption(
+ "timeline-item-gradient-depth",
+ _("Timeline item gradient depth"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_timeline_item_gradient_depth),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_timeline_item_gradient_depth),
+ 0, 1.0, 0.05
+ );
+ gui_hs->scale().set_update_policy (Gtk::UPDATE_DELAYED);
+ add_option (_("Appearance/Theme"), gui_hs);
+
+ vector<string> icon_sets = ::get_icon_sets ();
+ if (icon_sets.size() > 1) {
+ ComboOption<std::string>* io = new ComboOption<std::string> (
+ "icon-set", _("Icon Set"),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_icon_set),
+ sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_icon_set)
+ );
+ for (vector<string>::const_iterator i = icon_sets.begin (); i != icon_sets.end (); ++i) {
+ io->add (*i, *i);
+ }
+ add_option (_("Appearance/Theme"), io);
+ }
+
+ add_option (_("Appearance/Colors"), new OptionEditorHeading (_("Colors")));
+ add_option (_("Appearance/Colors"), new ColorThemeManager);
+ add_option (_("Appearance/Colors"), new OptionEditorBlank ());
+
+ /* Quirks */
+
+ add_option (_("Appearance/Quirks"), quirks_head);
+
+ bo = new BoolOption (
"use-wm-visibility",
- _("Use Window Manager/Desktop visibility information"),
+ _("Use visibility information provided by your Window Manager/Desktop"),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_use_wm_visibility),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_use_wm_visibility)
- ));
+ );
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget (),
+ _("If you have trouble toggling between hidden Editor and Mixer windows, try changing this setting."));
+ add_option (_("Appearance/Quirks"), bo);
#ifndef __APPLE__
bo = new BoolOption (
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_all_floating_windows_are_dialogs),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_all_floating_windows_are_dialogs)
);
- Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget (), string_compose (
- _("Mark all floating windows to be type \"Dialog\" rather than using \"Utility\" for some.\n"
- "This may help with some window managers. This requires a restart of %1 to take effect"),
- PROGRAM_NAME));
- add_option (_("GUI/Quirks"), bo);
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget (),
+ _("Mark all floating windows to be type \"Dialog\" rather than using \"Utility\" for some.\nThis may help with some window managers."));
+ add_option (_("Appearance/Quirks"), bo);
bo = new BoolOption (
"transients-follow-front",
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_transients_follow_front),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_transients_follow_front)
);
- Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget (), string_compose (
- _("Make transient windows follow the front window when toggling between the editor and mixer.\n"
- "This requires a restart of %1 to take effect"), PROGRAM_NAME));
- add_option (_("GUI/Quirks"), bo);
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget (),
+ _("Make transient windows follow the front window when toggling between the editor and mixer."));
+ add_option (_("Appearance/Quirks"), bo);
#endif
if (!Profile->get_mixbus()) {
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_floating_monitor_section),
sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_floating_monitor_section)
);
- Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget (), string_compose (
- _("When detaching the monitoring section, mark it as \"Utility\" window to stay in front.\n"
- "This requires a restart of %1 to take effect"), PROGRAM_NAME));
- add_option (_("GUI/Quirks"), bo);
+ Gtkmm2ext::UI::instance()->set_tip (bo->tip_widget (),
+ _("When detaching the monitoring section, mark it as \"Utility\" window to stay in front."));
+ add_option (_("Appearance/Quirks"), bo);
}
- add_option (_("GUI/Quirks"), new OptionEditorBlank ());
-
- add_option (S_("Preferences|Metering"), new OptionEditorHeading (_("Metering")));
-
- ComboOption<float>* mht = new ComboOption<float> (
- "meter-hold",
- _("Peak hold time"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_meter_hold),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_meter_hold)
- );
-
- mht->add (MeterHoldOff, _("off"));
- mht->add (MeterHoldShort, _("short"));
- mht->add (MeterHoldMedium, _("medium"));
- mht->add (MeterHoldLong, _("long"));
-
- add_option (S_("Preferences|Metering"), mht);
-
- ComboOption<float>* mfo = new ComboOption<float> (
- "meter-falloff",
- _("DPM fall-off"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_falloff),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_falloff)
- );
-
- mfo->add (METER_FALLOFF_OFF, _("off"));
- mfo->add (METER_FALLOFF_SLOWEST, _("slowest [6.6dB/sec]"));
- mfo->add (METER_FALLOFF_SLOW, _("slow [8.6dB/sec] (BBC PPM, EBU PPM)"));
- mfo->add (METER_FALLOFF_SLOWISH, _("moderate [12.0dB/sec] (DIN)"));
- mfo->add (METER_FALLOFF_MODERATE, _("medium [13.3dB/sec] (EBU Digi PPM, IRT Digi PPM)"));
- mfo->add (METER_FALLOFF_MEDIUM, _("fast [20dB/sec]"));
- mfo->add (METER_FALLOFF_FAST, _("very fast [32dB/sec]"));
-
- add_option (S_("Preferences|Metering"), mfo);
-
- ComboOption<MeterLineUp>* mlu = new ComboOption<MeterLineUp> (
- "meter-line-up-level",
- _("Meter line-up level; 0dBu"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_meter_line_up_level),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_meter_line_up_level)
- );
-
- mlu->add (MeteringLineUp24, _("-24dBFS (SMPTE US: 4dBu = -20dBFS)"));
- mlu->add (MeteringLineUp20, _("-20dBFS (SMPTE RP.0155)"));
- mlu->add (MeteringLineUp18, _("-18dBFS (EBU, BBC)"));
- mlu->add (MeteringLineUp15, _("-15dBFS (DIN)"));
-
- Gtkmm2ext::UI::instance()->set_tip (mlu->tip_widget(), _("Configure meter-marks and color-knee point for dBFS scale DPM, set reference level for IEC1/Nordic, IEC2 PPM and VU meter."));
-
- add_option (S_("Preferences|Metering"), mlu);
-
- ComboOption<MeterLineUp>* mld = new ComboOption<MeterLineUp> (
- "meter-line-up-din",
- _("IEC1/DIN Meter line-up level; 0dBu"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_meter_line_up_din),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_meter_line_up_din)
- );
-
- mld->add (MeteringLineUp24, _("-24dBFS (SMPTE US: 4dBu = -20dBFS)"));
- mld->add (MeteringLineUp20, _("-20dBFS (SMPTE RP.0155)"));
- mld->add (MeteringLineUp18, _("-18dBFS (EBU, BBC)"));
- mld->add (MeteringLineUp15, _("-15dBFS (DIN)"));
-
- Gtkmm2ext::UI::instance()->set_tip (mld->tip_widget(), _("Reference level for IEC1/DIN meter."));
-
- add_option (S_("Preferences|Metering"), mld);
-
- ComboOption<VUMeterStandard>* mvu = new ComboOption<VUMeterStandard> (
- "meter-vu-standard",
- _("VU Meter standard"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_meter_vu_standard),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_meter_vu_standard)
- );
-
- mvu->add (MeteringVUfrench, _("0VU = -2dBu (France)"));
- mvu->add (MeteringVUamerican, _("0VU = 0dBu (North America, Australia)"));
- mvu->add (MeteringVUstandard, _("0VU = +4dBu (standard)"));
- mvu->add (MeteringVUeight, _("0VU = +8dBu"));
-
- add_option (S_("Preferences|Metering"), mvu);
-
- ComboOption<MeterType>* mtm = new ComboOption<MeterType> (
- "meter-type-master",
- _("Default Meter Type for Master Bus"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_type_master),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_type_master)
- );
- mtm->add (MeterPeak, ArdourMeter::meter_type_string(MeterPeak));
- mtm->add (MeterK20, ArdourMeter::meter_type_string(MeterK20));
- mtm->add (MeterK14, ArdourMeter::meter_type_string(MeterK14));
- mtm->add (MeterK12, ArdourMeter::meter_type_string(MeterK12));
- mtm->add (MeterIEC1DIN, ArdourMeter::meter_type_string(MeterIEC1DIN));
- mtm->add (MeterIEC1NOR, ArdourMeter::meter_type_string(MeterIEC1NOR));
- mtm->add (MeterIEC2BBC, ArdourMeter::meter_type_string(MeterIEC2BBC));
- mtm->add (MeterIEC2EBU, ArdourMeter::meter_type_string(MeterIEC2EBU));
-
- add_option (S_("Preferences|Metering"), mtm);
-
-
- ComboOption<MeterType>* mtb = new ComboOption<MeterType> (
- "meter-type-bus",
- _("Default Meter Type for Busses"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_type_bus),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_type_bus)
- );
- mtb->add (MeterPeak, ArdourMeter::meter_type_string(MeterPeak));
- mtb->add (MeterK20, ArdourMeter::meter_type_string(MeterK20));
- mtb->add (MeterK14, ArdourMeter::meter_type_string(MeterK14));
- mtb->add (MeterK12, ArdourMeter::meter_type_string(MeterK12));
- mtb->add (MeterIEC1DIN, ArdourMeter::meter_type_string(MeterIEC1DIN));
- mtb->add (MeterIEC1NOR, ArdourMeter::meter_type_string(MeterIEC1NOR));
- mtb->add (MeterIEC2BBC, ArdourMeter::meter_type_string(MeterIEC2BBC));
- mtb->add (MeterIEC2EBU, ArdourMeter::meter_type_string(MeterIEC2EBU));
-
- add_option (S_("Preferences|Metering"), mtb);
-
- ComboOption<MeterType>* mtt = new ComboOption<MeterType> (
- "meter-type-track",
- _("Default Meter Type for Tracks"),
- sigc::mem_fun (*_rc_config, &RCConfiguration::get_meter_type_track),
- sigc::mem_fun (*_rc_config, &RCConfiguration::set_meter_type_track)
- );
- mtt->add (MeterPeak, ArdourMeter::meter_type_string(MeterPeak));
- mtt->add (MeterPeak0dB, ArdourMeter::meter_type_string(MeterPeak0dB));
-
- add_option (S_("Preferences|Metering"), mtt);
-
- HSliderOption *mpks = new HSliderOption("meter-peak",
- _("Peak threshold [dBFS]"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_meter_peak),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_meter_peak),
- -10, 0, .1, .1
- );
-
- Gtkmm2ext::UI::instance()->set_tip (
- mpks->tip_widget(),
- _("Specify the audio signal level in dBFS at and above which the meter-peak indicator will flash red."));
-
- add_option (S_("Preferences|Metering"), mpks);
-
- add_option (S_("Preferences|Metering"),
- new BoolOption (
- "meter-style-led",
- _("LED meter style"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_meter_style_led),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_meter_style_led)
- ));
-
- add_option (S_("Preferences|Metering"), new OptionEditorHeading (_("Editor Meters")));
-
- add_option (S_("Preferences|Metering"),
- new BoolOption (
- "show-track-meters",
- _("Show meters on tracks in the editor"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_show_track_meters),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_show_track_meters)
- ));
-
- add_option (S_("Preferences|Metering"),
- new BoolOption (
- "editor-stereo-only-meters",
- _("Show at most stereo meters in the track-header"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_editor_stereo_only_meters),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_editor_stereo_only_meters)
- ));
-
- add_option (S_("Preferences|Metering"), new OptionEditorHeading (_("Post Export Analysis")));
-
- add_option (S_("Preferences|Metering"),
- new BoolOption (
- "save-export-analysis-image",
- _("Save loudness analysis as image file"),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::get_save_export_analysis_image),
- sigc::mem_fun (UIConfiguration::instance(), &UIConfiguration::set_save_export_analysis_image)
- ));
+ add_option (_("Appearance/Quirks"), new OptionEditorBlank ());
/* VIDEO Timeline */
add_option (_("Video"), new OptionEditorHeading (_("Video Server")));
add_option (_("Video"), new VideoTimelineOptions (_rc_config));
- /* and now the theme manager */
-
- add_option (_("Theme"), new OptionEditorHeading (_("Theme")));
- add_option (_("Theme"), new ThemeManager);
-
- add_option (_("Theme/Colors"), new OptionEditorHeading (_("Colors")));
- add_option (_("Theme/Colors"), new ColorThemeManager);
-
Widget::show_all ();
//trigger some parameter-changed messages which affect widget-visibility or -sensitivity
Tabbable::set_state (*node, Stateful::loading_state_version);
}
- set_current_page (_("Misc"));
+ set_current_page (_("General"));
}
void
pd->hide();
if (r == RESPONSE_ACCEPT) {
_rc_config->set_plugin_path_lxvst(pd->get_serialized_paths());
+
+ MessageDialog msg (_("Re-scan Plugins now?"),
+ false /*no markup*/, Gtk::MESSAGE_QUESTION, Gtk::BUTTONS_YES_NO, true /*modal*/);
+ msg.set_default_response (Gtk::RESPONSE_YES);
+ if (msg.run() == Gtk::RESPONSE_YES) {
+ plugin_scan_refresh ();
+ }
}
delete pd;
}
pd->hide();
if (r == RESPONSE_ACCEPT) {
_rc_config->set_plugin_path_vst(pd->get_serialized_paths());
+ MessageDialog msg (_("Re-scan Plugins now?"),
+ false /*no markup*/, Gtk::MESSAGE_QUESTION, Gtk::BUTTONS_YES_NO, true /*modal*/);
+ msg.set_default_response (Gtk::RESPONSE_YES);
+ if (msg.run() == Gtk::RESPONSE_YES) {
+ plugin_scan_refresh ();
+ }
}
delete pd;
}
if (win && new_window) {
win->set_name ("PreferencesWindow");
ARDOUR_UI::instance()->setup_toplevel_window (*win, _("Preferences"), this);
+ win->resize (1, 1);
+ win->set_resizable (false);
}
return win;
projects / ardour.git / blobdiff