ardour.git
5 years agofix crash when copy'ing latent plugins 5.0
Robin Gareus [Wed, 10 Aug 2016 14:31:56 +0000 (16:31 +0200)]
fix crash when copy'ing latent plugins

5 years agoremove debug output
Paul Davis [Wed, 10 Aug 2016 01:26:22 +0000 (21:26 -0400)]
remove debug output

5 years agoremove debug output
Robin Gareus [Wed, 10 Aug 2016 01:25:25 +0000 (03:25 +0200)]
remove debug output

5 years agodon't bundle no-inst scripts
Robin Gareus [Wed, 10 Aug 2016 01:18:07 +0000 (03:18 +0200)]
don't bundle no-inst scripts

5 years agoprefix no-inst script with an underscore and skip install
Robin Gareus [Wed, 10 Aug 2016 01:12:11 +0000 (03:12 +0200)]
prefix no-inst script with an underscore and skip install

5 years agoprefix blessed scripted DSP plugins with a-*
Robin Gareus [Wed, 10 Aug 2016 01:11:49 +0000 (03:11 +0200)]
prefix blessed scripted DSP plugins with a-*

5 years agomerge source-defaults into system-config file
Robin Gareus [Tue, 9 Aug 2016 20:13:59 +0000 (22:13 +0200)]
merge source-defaults into system-config file

(generated by ./arcfg)

5 years agoclean up plugin ttls - always add semicolon for compatibility
Robin Gareus [Tue, 9 Aug 2016 20:00:29 +0000 (22:00 +0200)]
clean up plugin ttls - always add semicolon for compatibility

5 years agoFix test compilation error.
nick_m [Tue, 9 Aug 2016 17:16:49 +0000 (03:16 +1000)]
Fix test compilation error.

5 years agoBBTTest::addTest() should add a meter rather than replacing the first one.
nick_m [Tue, 9 Aug 2016 15:56:55 +0000 (01:56 +1000)]
BBTTest::addTest() should add a meter rather than replacing the first one.

5 years agoMake tempo tests use the api more correctly.
nick_m [Tue, 9 Aug 2016 15:46:05 +0000 (01:46 +1000)]
Make tempo tests use the api more correctly.

- TempoMap initially contains a tempo and meter.
  using add_tempo/meter() using the position of an
  existing section does the right thing, but prints a warning.
  Use replace_tempo/meter().

5 years agoAllow -ve framepos handling in TempoMap::framepos_plus_beats()
nick_m [Tue, 9 Aug 2016 14:48:53 +0000 (00:48 +1000)]
Allow -ve framepos handling in TempoMap::framepos_plus_beats()

- also handles frame positions previous to the initial
  meter (beat_at_frame() would return 0 in this case).

5 years agoadd plural forms for pt to gtk2_ardour/po/pt.po 5.0-rc2
Paul Davis [Tue, 9 Aug 2016 00:24:46 +0000 (20:24 -0400)]
add plural forms for pt to gtk2_ardour/po/pt.po

5 years ago(updated) pt(_BR) update for gtk2_ardour from Marcelo Teles
Paul Davis [Tue, 9 Aug 2016 00:20:45 +0000 (20:20 -0400)]
(updated) pt(_BR) update for gtk2_ardour from Marcelo Teles

5 years agoRevert "pt(_BR) update for gtk2_ardour from Marcelo Teles"
Paul Davis [Tue, 9 Aug 2016 00:19:55 +0000 (20:19 -0400)]
Revert "pt(_BR) update for gtk2_ardour from Marcelo Teles"

This reverts commit cf08eaa32d0d7b17f44cec616f3c9bb0430ba19c.

5 years agoupdated russian translation from Alexandre Prokoudine
Paul Davis [Tue, 9 Aug 2016 00:12:47 +0000 (20:12 -0400)]
updated russian translation from Alexandre Prokoudine

5 years agofix definition of PrimaryModifier for Keyboard for OS X
Paul Davis [Mon, 8 Aug 2016 21:59:11 +0000 (17:59 -0400)]
fix definition of PrimaryModifier for Keyboard for OS X

5 years agofix display of modifiers on OS X in the bindings editor
Paul Davis [Mon, 8 Aug 2016 21:47:02 +0000 (17:47 -0400)]
fix display of modifiers on OS X in the bindings editor

5 years agofix thinko that causes near duplicate menu items in group context menu when not in...
Paul Davis [Mon, 8 Aug 2016 21:20:59 +0000 (17:20 -0400)]
fix thinko that causes near duplicate menu items in group context menu when not in group tabs

5 years agofix bug when appdata.pot file cannot be regenerated
Paul Davis [Mon, 8 Aug 2016 17:51:20 +0000 (13:51 -0400)]
fix bug when appdata.pot file cannot be regenerated

5 years agoGenericUI: better popup placement for automation mode
Julien "_FrnchFrgg_" RIVAUD [Mon, 8 Aug 2016 14:33:29 +0000 (16:33 +0200)]
GenericUI: better popup placement for automation mode

5 years agoMove anchored menu placement strategy to Gtkmm2ext utils
Julien "_FrnchFrgg_" RIVAUD [Mon, 8 Aug 2016 13:35:19 +0000 (15:35 +0200)]
Move anchored menu placement strategy to Gtkmm2ext utils

So that it can be used by others.

5 years agofix race condition when dropping Ports
Paul Davis [Mon, 8 Aug 2016 13:26:50 +0000 (09:26 -0400)]
fix race condition when dropping Ports

Jack2 calls back from a notification thread and the callback (PortManager::connect_callback())
could end up holding the final reference on 1 or more ports. The ports would then be
unregistered as we leave the callback scope, which is illegal (no server calls from
a notification thread)

5 years agoadd explanatory comment
Paul Davis [Mon, 8 Aug 2016 12:26:58 +0000 (08:26 -0400)]
add explanatory comment

5 years agofix typo
Robin Gareus [Sun, 7 Aug 2016 18:29:12 +0000 (20:29 +0200)]
fix typo

5 years agoMake ArdourDisplay a subclass of ArdourDropdown
Julien "_FrnchFrgg_" RIVAUD [Sun, 7 Aug 2016 17:44:54 +0000 (19:44 +0200)]
Make ArdourDisplay a subclass of ArdourDropdown

5 years agoRemove the space for checks/radios/icons in dropdowns
Julien "_FrnchFrgg_" RIVAUD [Sun, 7 Aug 2016 16:50:17 +0000 (18:50 +0200)]
Remove the space for checks/radios/icons in dropdowns

5 years agoMake Dropdown menus at least as wide as the button
Julien "_FrnchFrgg_" RIVAUD [Sun, 7 Aug 2016 16:43:39 +0000 (18:43 +0200)]
Make Dropdown menus at least as wide as the button

5 years agoImprove placement of Dropdown popups.
Julien "_FrnchFrgg_" RIVAUD [Sun, 7 Aug 2016 15:20:43 +0000 (17:20 +0200)]
Improve placement of Dropdown popups.

When an item in the menu corresponds to the currently displayed choice,
vertically align the item with the button on menu popup.

5 years agoUse a C++ bool constant
Julien "_FrnchFrgg_" RIVAUD [Sun, 7 Aug 2016 14:17:39 +0000 (16:17 +0200)]
Use a C++ bool constant

5 years agoImprove ArdourDropdown menu position
Julien "_FrnchFrgg_" RIVAUD [Sun, 7 Aug 2016 14:14:59 +0000 (16:14 +0200)]
Improve ArdourDropdown menu position

5 years agoRemove a no longer true comment
Julien "_FrnchFrgg_" RIVAUD [Sun, 7 Aug 2016 08:00:26 +0000 (10:00 +0200)]
Remove a no longer true comment

It should have been removed as part of 539c062ed23daf308e650b5d1039384ac5a55666
(Make the configuration penalty subtler about inputs).

5 years agoadd a script to multi-split regions
Robin Gareus [Sat, 6 Aug 2016 20:14:24 +0000 (22:14 +0200)]
add a script to multi-split regions

5 years agoa few more Location related lua bindings
Robin Gareus [Sat, 6 Aug 2016 20:12:39 +0000 (22:12 +0200)]
a few more Location related lua bindings

5 years agoUse a default configuration instead of bailing out
Julien "_FrnchFrgg_" RIVAUD [Thu, 4 Aug 2016 16:03:24 +0000 (18:03 +0200)]
Use a default configuration instead of bailing out

If the script doesn't provide a dsp_ioconfig() function, or if it does
not return a table of tables, provide an empty table of table as
default, which means a single configuration with default values.

5 years agoRemove dsp_has_midi_*() in favor of dsp_ioconfig()
Julien "_FrnchFrgg_" RIVAUD [Thu, 4 Aug 2016 15:47:38 +0000 (17:47 +0200)]
Remove dsp_has_midi_*() in favor of dsp_ioconfig()

_has_midi_*put members of LuaProc will be set according to the actual
configuration chosen, for configure_io() and run() to use.

5 years agoRefuse more configs with unmatched midi in if !imprecise
Julien "_FrnchFrgg_" RIVAUD [Thu, 4 Aug 2016 11:01:28 +0000 (13:01 +0200)]
Refuse more configs with unmatched midi in if !imprecise

Since MIDI in should be

5 years agoTake midi into account for penalty computation
Julien "_FrnchFrgg_" RIVAUD [Thu, 4 Aug 2016 10:29:19 +0000 (12:29 +0200)]
Take midi into account for penalty computation

Demote configurations if they have mismatched midi in or out with the
same mechanism as for audio, but with lower coefficients so that
mismatched midi has less influence than mismatched audio in selecting
the best configuration.

POLICY CHANGE.

5 years agoRemove ad-hoc handling of possible_out == 0
Julien "_FrnchFrgg_" RIVAUD [Thu, 4 Aug 2016 08:11:21 +0000 (10:11 +0200)]
Remove ad-hoc handling of possible_out == 0

Just refuse configurations without any output at all, and let the
remaining logic take care of selecting configurations with no audio
output if they make sense and there are no better configurations.

POLICY CHANGE: configurations with no output might now be considered
even if they have audio inputs (e.g. a pure pitch detector without audio
passthrough), whereas they were skipped before.

5 years agoMake the configuration penalty subtler about inputs
Julien "_FrnchFrgg_" RIVAUD [Thu, 4 Aug 2016 07:45:33 +0000 (09:45 +0200)]
Make the configuration penalty subtler about inputs

Instead of uniformly demote configurations with a non-matching audio
input count (using a penalty offset of 1000), also grade the
impreciseness of the configuration so that those with the nearest input
count are preferred. As for outputs, give a slightly higher handicap to
configuration with too many inputs with regard to the actual audio
inputs that can be fed to the plugin.

POLICY CHANGE: when only imprecise configurations are found the actually
selected one can be different (better) than before this commit.

5 years agoRemove ad-hoc handling of possible_in == 0
Julien "_FrnchFrgg_" RIVAUD [Wed, 3 Aug 2016 21:28:09 +0000 (23:28 +0200)]
Remove ad-hoc handling of possible_in == 0

Just make the code responsible for possible_in > 0 also handle
possible_in == 0 since it nearly does the same thing.

The only difference is that the possible_in == 0 case didn't check at
all for audio_in, essentially acting as if possible_in was audio_in.
There is thus a small POLICY CHANGE, but the selected configuration will
stay the same unless a better matching configuration is available.

5 years agoChange column width in macros
Julien "_FrnchFrgg_" RIVAUD [Thu, 4 Aug 2016 07:40:16 +0000 (09:40 +0200)]
Change column width in macros

5 years agoSet \midi_out when selecting a configuration...
Julien "_FrnchFrgg_" RIVAUD [Wed, 3 Aug 2016 15:18:22 +0000 (17:18 +0200)]
Set \midi_out when selecting a configuration...

...instead of at the very beginning, so that it can depend on the loop
iteration.

5 years agoMerge pass 2 (imprecise) into pass 1
Julien "_FrnchFrgg_" RIVAUD [Wed, 3 Aug 2016 14:28:08 +0000 (16:28 +0200)]
Merge pass 2 (imprecise) into pass 1

Still no policy change, since when a configuration is chosen that would
have belonged to the second pass, then its penalty will be increased by
1000 and it will be selected only as last recourse.

5 years agoMove MIDI filters imprecise handling from 2nd pass to 1st
Julien "_FrnchFrgg_" RIVAUD [Wed, 3 Aug 2016 10:14:12 +0000 (12:14 +0200)]
Move MIDI filters imprecise handling from 2nd pass to 1st

This doesn't change the policy since configurations are given an
additional 1000 penalty if audio_in != possible_in, and will thus be
trumped by any "precise" configuration (unless the latter has 1000
excess or missing outputs which should be less than likely).

5 years agoRearrange condition for pure midi plugins
Julien "_FrnchFrgg_" RIVAUD [Wed, 3 Aug 2016 10:08:01 +0000 (12:08 +0200)]
Rearrange condition for pure midi plugins

5 years agoUse FOUNDCFG* instead of setting the configuration by hand
Julien "_FrnchFrgg_" RIVAUD [Tue, 2 Aug 2016 16:20:42 +0000 (18:20 +0200)]
Use FOUNDCFG* instead of setting the configuration by hand

5 years agoEnable overriding the configuration penalty
Julien "_FrnchFrgg_" RIVAUD [Tue, 2 Aug 2016 19:28:22 +0000 (21:28 +0200)]
Enable overriding the configuration penalty

This is useful for exact matches that would otherwise need to duplicate
the bookeeping done by FOUNDCFG()

5 years agoIntroduce a macro for imprecise configurations
Julien "_FrnchFrgg_" RIVAUD [Tue, 2 Aug 2016 15:47:14 +0000 (17:47 +0200)]
Introduce a macro for imprecise configurations

It enables only setting the imprecise audio channel count if the
configuration is indeed selected.

5 years agoSet \imprecise midi channel count in FOUNDCFG
Julien "_FrnchFrgg_" RIVAUD [Tue, 2 Aug 2016 12:25:46 +0000 (14:25 +0200)]
Set \imprecise midi channel count in FOUNDCFG

So that it can depend on the actual configuration selected.

5 years agoSet \imprecise when a configuration is chosen
Julien "_FrnchFrgg_" RIVAUD [Tue, 2 Aug 2016 11:41:29 +0000 (13:41 +0200)]
Set \imprecise when a configuration is chosen

Instead of setting \imprecise at the end of the loop if a configuration
was found (which clobbered valuable information, see dae2406187), set it
each time a new configuration is chosen.

In the second loop that tries harder, resetting \imprecise also avoids a
previous "imprecise->set(AUDIO, 0)" to last even if another
configuration is chosen later.

Last but not least, it will enable correctly setting the midi input
count hoped for by the configuration.

5 years agoMerge some cases to avoid duplicated logic
Julien "_FrnchFrgg_" RIVAUD [Mon, 1 Aug 2016 21:21:33 +0000 (23:21 +0200)]
Merge some cases to avoid duplicated logic

Merge the cases in == -1 and in == -2 since those are both wildcards,
almost symmetric in the AU spec, and handled completely symmetrically by
the code here considering it accepts invalid or unspecified demands.

Also merge the cases in > 0 and in < -2 since they are handled exactly
the same as far as outputs are concerned.

5 years agoRemove code with no actual effect
Julien "_FrnchFrgg_" RIVAUD [Mon, 1 Aug 2016 19:57:39 +0000 (21:57 +0200)]
Remove code with no actual effect

That code modifies \imprecise if it is not NULL, but
 - if a configuration is found, \imprecise will be set to in, clobbering
   the tentative changes done here;
 - if a configuration is not found, a last-resort loop will be run that
   will set the same member of \imprecise, also clobbering our changes.

Remove it since it does nothing that is looked at before being
forgotten. A way to get the intended outcome will be introduced later.

5 years agoMove a MIDI test in the table handling loop...
Julien "_FrnchFrgg_" RIVAUD [Mon, 1 Aug 2016 13:01:44 +0000 (15:01 +0200)]
Move a MIDI test in the table handling loop...

...to later enable that condition truthiness to depend on the
loop iteration. The goal here is to prepare for the upcoming rewrite,
without introducing any policy change for now.

There is no behavior change because if all loop iterations are skipped,
then \found will be false, and with \imprecise being null the last
attempt will be skipped and we will return false.

5 years agoReplace the exact_match logic by a negative penalty
Julien "_FrnchFrgg_" RIVAUD [Mon, 1 Aug 2016 13:41:10 +0000 (15:41 +0200)]
Replace the exact_match logic by a negative penalty

Instead of doing an initial loop for detection of exact matches, then
letting the following loop set \audio_out yet ignore its value, merge
the two loops but give exact matches a negative penalty so that the
\audio_out value they set won't change afterwards.

No policy change.

5 years agoRemove wrong asserts
Julien "_FrnchFrgg_" RIVAUD [Mon, 1 Aug 2016 12:35:06 +0000 (14:35 +0200)]
Remove wrong asserts

5 years agoLuaProc::can_support_io_configuration: don't mix int and int32_t
Julien "_FrnchFrgg_" RIVAUD [Mon, 1 Aug 2016 11:24:08 +0000 (13:24 +0200)]
LuaProc::can_support_io_configuration: don't mix int and int32_t

5 years agoOSC: make sure this is c++98 compatible.
Len Ovens [Sat, 6 Aug 2016 16:25:57 +0000 (09:25 -0700)]
OSC: make sure this is c++98 compatible.

5 years agoupdate german translation
Edgar Aichinger [Sat, 6 Aug 2016 14:03:45 +0000 (16:03 +0200)]
update german translation

5 years agoC++98 compat for 032139ac3
Robin Gareus [Sat, 6 Aug 2016 12:40:18 +0000 (14:40 +0200)]
C++98 compat for 032139ac3

5 years agomark session dirty when changing plugin presets
Robin Gareus [Sat, 6 Aug 2016 12:28:20 +0000 (14:28 +0200)]
mark session dirty when changing plugin presets

5 years agoosc: provide human readable reading for gain.
Len Ovens [Sat, 6 Aug 2016 02:08:43 +0000 (19:08 -0700)]
osc: provide human readable reading for gain.

5 years agoOSC: provide human readable level for sends.
Len Ovens [Sat, 6 Aug 2016 00:24:09 +0000 (17:24 -0700)]
OSC: provide  human readable level for sends.

5 years agoImprove midnam for Waldorf Blofeld
Maurizio Berti [Fri, 5 Aug 2016 20:03:11 +0000 (22:03 +0200)]
Improve midnam for Waldorf Blofeld

5 years agoadd a "Pin Management" button to the plugin UI-header
Robin Gareus [Fri, 5 Aug 2016 00:35:51 +0000 (02:35 +0200)]
add a "Pin Management" button to the plugin UI-header

5 years agoworkaround changes in glibmm 2.49.x
Nils Philippsen [Thu, 4 Aug 2016 07:48:47 +0000 (09:48 +0200)]
workaround changes in glibmm 2.49.x

Glib::RefPtr defines the operator bool() as explicit which breaks
comparisons like "some_ref_ptr == 0" or "... != 0".

https://bugzilla.gnome.org/show_bug.cgi?id=769502

5 years agoadd support for VST default values (instantiation time value)
Robin Gareus [Wed, 3 Aug 2016 18:53:49 +0000 (20:53 +0200)]
add support for VST default values (instantiation time value)

5 years agoadd a wrapper to launch the vst-scanner manually
Robin Gareus [Wed, 3 Aug 2016 17:56:22 +0000 (19:56 +0200)]
add a wrapper to launch the vst-scanner manually

5 years agoif we can't determine the gcc4/5 prefer the new gcc5 ABI
Robin Gareus [Tue, 2 Aug 2016 13:50:16 +0000 (15:50 +0200)]
if we can't determine the gcc4/5 prefer the new gcc5 ABI

5 years agoinclude XT* plugins with Ardour bundles and x42 on OSX/Win
Robin Gareus [Tue, 2 Aug 2016 11:46:41 +0000 (13:46 +0200)]
include XT* plugins with Ardour bundles and x42 on OSX/Win

5 years agoptformat: Decrypt ptf files exported from ptx sessions
Damien Zammit [Tue, 2 Aug 2016 12:20:24 +0000 (22:20 +1000)]
ptformat: Decrypt ptf files exported from ptx sessions

5 years agomake Session::get_remote_nth_stripable() ignore hidden stripables unless asked.
Paul Davis [Mon, 1 Aug 2016 16:02:30 +0000 (12:02 -0400)]
make Session::get_remote_nth_stripable() ignore hidden stripables unless asked.

this more closely matches the semantics of ye olde get_*_by_rid() from ardour 4.x and earlier

5 years agoBe more tolerant to missing values or errors in io_config()
Julien "_FrnchFrgg_" RIVAUD [Sun, 31 Jul 2016 21:43:15 +0000 (23:43 +0200)]
Be more tolerant to missing values or errors in io_config()

5 years agoRemove redundant condition
Julien "_FrnchFrgg_" RIVAUD [Sun, 31 Jul 2016 11:32:39 +0000 (13:32 +0200)]
Remove redundant condition

Since can_replicate is true at loop start, and in the loop body there is
a break; after every can_replicate=false, there's no point to test its
value in the loop condition.

5 years agoRemove duplicate setters that don't affect the outcome
Julien "_FrnchFrgg_" RIVAUD [Sun, 31 Jul 2016 08:43:58 +0000 (10:43 +0200)]
Remove duplicate setters that don't affect the outcome

There is no code that read the set value in between the removed line and
its exact counterpart below. There is no similar duplicate in the
AudioUnit code due to the way AudioUnit handles midi.

5 years agoFix state features array
David Robillard [Mon, 1 Aug 2016 02:48:15 +0000 (22:48 -0400)]
Fix state features array

5 years agoSupport thread-safe LV2 state restoration
David Robillard [Mon, 1 Aug 2016 01:59:21 +0000 (21:59 -0400)]
Support thread-safe LV2 state restoration

The original LV2 state extension required that run() is suspended during
restore().  Ardour violates this rule, which can lead to crashes and
other issues.

The state extension has been updated to allow restoring state in a
thread-safe way by using the worker to enqueue state changes.  This
commit supports that new specification, i.e. supports dropout-free state
restoration properly.

However, the bug with old plugins that do not use this facility is still
not fixed.

5 years agoSupport LV2 log trace messages
David Robillard [Mon, 1 Aug 2016 00:58:47 +0000 (20:58 -0400)]
Support LV2 log trace messages

5 years agoFix possible ringbuffer overflow
David Robillard [Mon, 1 Aug 2016 00:06:51 +0000 (20:06 -0400)]
Fix possible ringbuffer overflow

5 years agoAdd some controls for the Waldorf Blofeld
David Robillard [Sun, 31 Jul 2016 23:01:02 +0000 (19:01 -0400)]
Add some controls for the Waldorf Blofeld

5 years agoFix validation of midnam files
David Robillard [Sun, 31 Jul 2016 22:48:59 +0000 (18:48 -0400)]
Fix validation of midnam files

The MMA in all their wisdom has broken midi.org, so modify the DTD to
use a local system name which xmllint will find in the current
directory.

5 years agoUpdate clear-gray-ardour.colors
cooltehno [Sun, 31 Jul 2016 15:22:42 +0000 (19:22 +0400)]
Update clear-gray-ardour.colors

A peak rectangle in the mixer strip is ruled by "gtk_bright_indicator". In the previous commit I mixed up this item with "meterbridge label" & "meterbridge peakindicator". This commit changes "gtk_bright_indicator" from white to red and returns "meterbridge label" & "meterbridge peakindicator" state to primordial. So now the peak rectangle in the mixer strip will be red when a sound peak has a place.

5 years agoUse S_ macro when comparing modifier names in User Interaction Preferences.
nick_m [Sun, 31 Jul 2016 15:04:28 +0000 (01:04 +1000)]
Use S_ macro when comparing modifier names in User Interaction Preferences.

- Fixes bug where selecting 'Shift' as a modifier was ignored.

5 years agoUpdate clear-gray-ardour.colors
cooltehno [Sun, 31 Jul 2016 13:11:58 +0000 (17:11 +0400)]
Update clear-gray-ardour.colors

5 years agoUpdate Spanish translation
pablus [Sat, 30 Jul 2016 10:52:16 +0000 (12:52 +0200)]
Update Spanish translation

5 years agoyet another multi-ABI bundle installer fix
Robin Gareus [Fri, 29 Jul 2016 23:23:38 +0000 (01:23 +0200)]
yet another multi-ABI bundle installer fix

5 years agoand now with proper bash syntax
Robin Gareus [Fri, 29 Jul 2016 21:57:52 +0000 (23:57 +0200)]
and now with proper bash syntax

5 years agoUpdate French translation
Julien "_FrnchFrgg_" RIVAUD [Fri, 29 Jul 2016 19:18:37 +0000 (21:18 +0200)]
Update French translation

5 years agoMake monitor detection reuse the port name translation
Julien "_FrnchFrgg_" RIVAUD [Fri, 29 Jul 2016 18:49:54 +0000 (20:49 +0200)]
Make monitor detection reuse the port name translation

So that they never get out of sync, and translators don't get confused.

Also replace some N_() where X_() was really intended.

5 years agoprepare installer for multiabi bundles
Robin Gareus [Fri, 29 Jul 2016 19:50:47 +0000 (21:50 +0200)]
prepare installer for multiabi bundles

5 years agomake makeself compression options optional.
Robin Gareus [Fri, 29 Jul 2016 18:45:21 +0000 (20:45 +0200)]
make makeself compression options optional.

5 years agoDon't compress linux bundle, compress installer (with xz)
Robin Gareus [Fri, 29 Jul 2016 16:56:07 +0000 (18:56 +0200)]
Don't compress linux bundle, compress installer (with xz)

This halves the installer size from about 60MB to 29MB.

5 years ago2016-07-29 Update zh.po for Ardoru 5.0
YQ-YSY [Fri, 29 Jul 2016 13:34:52 +0000 (21:34 +0800)]
2016-07-29 Update zh.po for Ardoru 5.0

5 years agoOSC: make send enables work in MB
Len Ovens [Fri, 29 Jul 2016 00:51:12 +0000 (17:51 -0700)]
OSC: make send enables work in MB

5 years agoGenericUI: Update all input controls on preset load
Julien "_FrnchFrgg_" RIVAUD [Fri, 29 Jul 2016 00:06:55 +0000 (02:06 +0200)]
GenericUI: Update all input controls on preset load

The existing code relies on AutomationControls for getting parameter
changes and update the UI accordingly. One case where this doesn't yet
work is preset loading, where ARDOUR::Plugin is responsible for actually
loading the preset but doesn't notify the changes to AutomationControls.

Since the input_controls vector now contains all ControlUI's that rely on
AutomationControls to get updates, just listen to Plugin::PresetLoaded()
and trigger an update of all elements in input_controls.

This is temporary until a better solution is devised to make
AutomationControls aware of preset loading.

5 years agoGenericUI: Show automation UI for dropdowns
Julien "_FrnchFrgg_" RIVAUD [Thu, 28 Jul 2016 22:54:25 +0000 (00:54 +0200)]
GenericUI: Show automation UI for dropdowns

Also merge the ControlUI local layout of dropdows with the local layout
of other control types (except FileButton).

5 years agoGenericUI: disable super rapid timer for input controls
Julien "_FrnchFrgg_" RIVAUD [Thu, 28 Jul 2016 22:10:19 +0000 (00:10 +0200)]
GenericUI: disable super rapid timer for input controls

The super rapid timer was disconnected by GenericPluginUI::stop_updating
but never connected again, so the generic UI worked often without
getting periodic update triggers anyway.

Try to disable the mechanism altogether, and see if there are updating
glitches.

5 years agoGenericUI: replace if() by assert()
Julien "_FrnchFrgg_" RIVAUD [Thu, 28 Jul 2016 21:50:33 +0000 (23:50 +0200)]
GenericUI: replace if() by assert()

It makes no sense to check for the validity of mcontrol only for
controller creation, since the remainder of the code assumes that the
controller will have been created correctly.

Replace that by an assert.

5 years agoGenericUI: remove duplicate connection to signal
Julien "_FrnchFrgg_" RIVAUD [Thu, 28 Jul 2016 21:07:44 +0000 (23:07 +0200)]
GenericUI: remove duplicate connection to signal

Now that there isn't an early return anymore for Dropdowns, the common
path takes care of connecting the display update code to the correct
signal.

5 years agoGenericUI: replace early return by an else
Julien "_FrnchFrgg_" RIVAUD [Thu, 28 Jul 2016 21:06:04 +0000 (23:06 +0200)]
GenericUI: replace early return by an else